Professional Documents
Culture Documents
INTRODUCTION
The products that are used to control the motion of wheels according to movement of steering are known as steering linkage products.
The objects that are used to convert rotary motion to angular motion are known as steering gear.
Ball pin is the object that can rotate about 360 degrees. The ball head is connected to socket. The tail end is connected to the drag link. Socket is used for holding the ball pin firmly. The stem of the socket is punched into the Tie rod.
The drop arm is used to transmit power from steering gear box. Drag link is connected to drop arm & tie rod. Drag link operates the tie rod according to the movement of drop arm.
TIE ROD
Tie rod is hollow tube bent at both ends. The socket & ball pin are fitted to Tie rod at its ends. Tie rod is used to turn the wheels according to the steering direction.
STEERING GEARS
Worm is a threaded blank which is connected to the steering system. The nut moves over the threaded portion of the worm. Both worm & nut transfers power to the Rocker shaft.
ROCKER SHAFT
Rocker shaft is a link which converts rotary motion into angular motion. Rocker shafts head portion is connected with nut & tail end is connected with drag link. They can be classified as follows Sector type Fork type
HOUSING
ASSEMBLY
Steering Gear box
Drop arm
Drag link Tie rod Wheels
MECHANISM
THANK YOU