Professional Documents
Culture Documents
SERVICES
CERTIFICATE OF CALIBRATION
Date of issue: Customer: Cust. Ref:
JCS Ref:
29.08.2011
27.08.2011 26.08.2012
DESCRIPTION
OF INSTRUMENT:
SL. No.: RANGE: 1123526 0 to 1000 bar MAKE: Wika RESOLUTION: 20bar
6" Dial
PRESSURE GAUGE
MODEL: STANDARDS Equipment: Dead Weight Pressure Tester
12028-99/L963 20.S"C
Humidity:
26148/2010
55%Rh
Results:
-.. Applied ~ ,,-------
Up pressure in bar
Indicated value
As Found As left As Found
Applied
Indicated value
As Found As left As Found
Error
As left
'"
'-r!
SOO
1000
Note:
All standards used are traceable to national Configuration Medium Used for calibration:
The SI unit of pressure
I international standards
The reported expanded uncertainty is based on a standard uncertainty multiplied by a coverage factor k=2, providing a level of confidence of approximately Test method variation: Nil Accuracy: 1 % FS 95%.
****
Calibrated by : Arun.R~.
END OF CERTIFICATE
**"*
Approved by : Praveen R~
Trus certificate provides traceability of measure Physical Laboratory or other recognised national prior written approval of the JCS Form 8.1. Date effec 15.07.2010,Rev 1
Fay-:+9714
"~. ,//%'L1
<':'~:2,"
CAUBRATICJI-..l SERV~CES
AL
CERTIFICATE OF CALIBRATION
Date of issue :18.10.2011 Customer: Gust. Ref: JCS Ref: M/s.Bauer J EV/1289 J10/11048 International, Dubai-U.A.E. Date of Calibration: Recommended Due: 18.10.2011 17.10.2012 Certificate Number: J10/11048.05
DESCRIPTION
OF INSTRUMENT:
SL.No: YGG 353651 RANGE: 0 to 100mm MAKE: Kafer RESOLUTION: 0.01 mm GM 80/100 T
DIAL GAUGE MODEL: STANDARDS Equipment: Gauge Block Set Environmental Reference: conditions:
USED FOR CALJBRATION: Make: Tesa Temperature: JGP 01 W06 Serial Number: 002411 20.7°C Certificate Number: 217446 Humidity: 55%Rh
Work instruction
Results:
--··-~------+---------,------'----'--------+---------+---'---------1
Measured (mm)
Error (mm)
As Left
As Left
As Found
is ±O.006mm
I international standards
The reported expanded uncertainty is based on a standard uncertainty multiplied by acoverage factor k=2, providing a level of confidence of approximately 95%. Test Method Variation:NIL UUT Accuracy: Calibrated ±O.05mm
·/~>'-~"-<::(\_'::'~
:-~l,t~-;\·~·-
';:':~~:~~::'~:;'~~:>~';"
by :Praveen. T. ~'('?'
I
This certificate provides traceability of measurement to·r.~"9&gfJ!s,:(fd''/'J~ilC?nal standards, and to units of measurement realised at the National Physical Laboratory or other recognised national standar(js:~laborErto?;es. This certificate may not be reproduced other than in full, except with the prior written approval of the JCS Form 8.0, Date eHec 15.03.201o,Rev 0 Page 1 of 1
!\!\!~''{~:.'.:-.:,~{~!)
:;?;r~;")\~If. J\ f
... ;".~.,,,. 1,'l.J
****
Approved
by : Praveen. ~
CALiBRATiON
ANSAL
SERVICES
CERTIFICATE OF CALIBRATION
Date of issue :18.10.2011 Customer: Cust, Ref: JCS Ref: M/s.Bauer International, JEV/1289 J 10(11048 Dubai-U.A.E. Date of Calibration: Recommended Due: 18.10.2011 17.10.2012 Certificate Number; J10/11048.11
DESCRIPTION
OF INSTRUMENT:
SL.No: YGG 353520 RANGE: 0 to 100mm MAKE: Kafer RESOLUTION: O.01mm GM 80(100 T
DIAL GAUGE MODEL: STANDARDS Equipment: Gauge Block Set Environmental Reference: conditions: JCP 01 W06
USED FOR CALIBRATION: Make: Tesa Temperature: Serial Number: 002411 20.goC Certificate Number: 217446 Humidity: 54%Rh
Work instruction
Results:
..
__ Applied (mm)
..
Measured (mm)
As Found As Left
!
As Found
Error (mm)
As Left
(Master)
--.-.
~.---,-
_-,_
__
t-- ....
-+---_.
I
___I· _::::_g,Q1__~::__
0.01
'100.000'-1
--I -- ~:~}-.---~~
I international standards
The reported expanded uncertainty is based on a standard uncertainty multiplied by acoverage factor k:;2, providing a level of confidence of approximately 95% . Test Method Variation:N1L UUT Accuracy: Calibrated ±O.05mm
... ~:..:;,;:':.:=.~<';j~
~J/~:~/'(~
,\ .~.". .
E~9;{);~~;
by :Praveen. T. H
':l~~:'" ~H,:E..
.!•• ".
..r~,,'
t:-,,~~' If..~T~
'-. ~I;;:.~ ~ (:{~ /'~'~'''----' :tj\~~;:/ This certificate provides traceability of measuremeiifto..a"fiational standards, and to units of measurement realised at the National Physical Laboratory or other recognised national standards laboratories. This certificate may not be reproduced other than in full, except with the prior written approval of the JCS Form 8.0. Date effec 15.03.201 O,Rev 0 Page 1 of 1
'->.~\,,~~~<,
{~~'/l
.4t'" !i
il.I,.·
::3,
TIFICATE
****
Approved
by : Praveen. ~
_c:S,~
P(:
E!ox.127290,
Fax: +97143374487.
Email:jansal@eim.ae,
Website: www.jansalcalibraHon.com
CERTIFICATE
Date of issue :18.10.2011 Customer: Cust. Ref: JCSRef: M/s.Bauer International, JEV/1289 J10/11048 Oubai-U.A.E.
OF CALIBRATION
Certificate Number: J10/11048.10
1B.10.2011 17.10.2012
DESCRIPTION
OF INSTRUMENT:
SL.No: YGG 353644 RANGE: 0 to 100mm MAKE: Kafer RESOLUTION: O.01mm GM 80/100 T
DIAL GAUGE MODEL: STANDARDS Equipment: Gauge Block Set Environmental Reference: conditions:
USED FOR CALIBRATION: Make: Tesa Temperature: JCP 01 W06 Serial Number: 002411 21.0DC Certificate Number: 217446 Humidity: 57%Rh
Work instruction
Results:
- --~--:c-:---:-~----+---.----,-,-,-.:c...::..c=----;--'-'---'-:":"':":":---'----------.._ ... t--~ ------~-+----''--------___l _ (Master) As Found As Left As Found As Left
____ r~ __
Measured (rnrn)
Error (rnrn)
....-~------+~-------+--------t---------t--------------j -~ ...
. ..::c02-'------+---'-7~5~.0~2_=__=_-~_=_~1~-=--=-_=_-=--=-0~.-::-0_2_=__=_-~_=__=_~t-i\~-~-~_~·_ 0.03
Note:
The standards used are traceable to national
I international standards
The reported expanded uncertainty is based on a standard uncertainty multiplied by acoverage factor k=2, providing a level of confidence of approximately 95%. Test Method Variation: NIL UUT Accuracy: Calibrated ±0.05mm " T.
. '\
Lol:i,_,: . :~"":.'~... .
by :Praveen.
H~~-,jf((!\ I
~\~~~I~;
. , "1.72SC
; r."E.
_... . ~~
,.(.' l
; '"
~d~~
:: ~.'
' ')!j:~'
l *J,
r. G
/j r
****
Approved by : Praveen. ~<::;;::,
~
.'·,t·, This certificate provides traceability of measurement (ee Physical Laboratory or other recognised national standa;d~_ prior written approval of the JCS Form 8.0. Date effec 15.03.201 D.Rev 0
. :'J~,'-.,
,/1;':://
I~
/6
standards, and to units of measurement realised at the National ... ,.f!tfltifft. This certificate may not be reproduced other than in full, except with the Page 1 of 1
~l(j}Jt1P.6a/
r.o
8m;: 127290.
L
CERTIFICATE OF CALIBRATION
Date of issue :18.10.2011 Customer: Cust. Ref: JCS Ref: M/s.Bauer International, JEV/1289 J10/11048 Dubai·U.A.E. Date of Calibration: Recommended Due: 18.10.2011 17.10.2012 Certificate Number: J10/11048.03
DESCRIPTION
OF INSTRUMENT:
SL.No: YGG 353678 RANGE: MAKE: Kafer RESOLUTION: O.01mm GM 80/100 T
DIAL GAUGE MODEL: STANDARDS Equipment: Gauge Block Set Environmental Reference: conditions:
a to
100mm
USED FOR CALIBRATION: Make: Tesa Temperature: JCP 01 W06 Serial Number: 002411 20.4°C Certificate Number: 217446 Humidity: 54%Rh
Work instruction
Results:
...
Measured (mm)
As Found As Left As Found
Error (mm)
As Left
--- -----
100.000"
__~
····F·
5.00
0.00
0.00
~.~--j
~~
-·100.02",1---~---10_:_0-.0-2-·--;
~~~ __-L__~~~
Uncertaintv Note:
of measurement
is :!:O.006mm
0.00
0.00
~=-
standards
The reported expanded uncertainty is based on a standard uncertainty multiplied by acoverage factor k",2, providing a level of confidence of approximately' Test Method Variation:NIL
"
7'",;/ '
''I
~~r;;~'~~,
,,~.:~..
p~~~J~~2~§ W)PATE ****
nul)t\\ . U.A.E,
~(
5.%~
c.-
.~
til, .
''-..--'
This cenittcete provides traceability of measiJrement to rec mSUd~atronal standards. and to units of measurement realised at the National Physical Laboratory or other recognised national standards laboratories. This certificate may not be reproduced other than in full, except with the prior written approval of the JCS Form 8.0, Date effec 15.03.201 O,Rev Page 1 of 1
f.'lflIBRt.\\\l:::;{7 ~
.-."
., /1
.//{< ';'~//
~~. ij
t3.
'I
,
Approved by : Praveen. ~,
Fax'.+97143374487,
CERTIFICATE OF CALIBRATION
Date of issue :1B.10.2011 Customer: Gust. Ref: JCS Ref: M/s.Bauer International, JEV/1289 J1 0/11 048 Dubai-U.A.E. Date of Calibration: Recommended Due: 18.10.2011 17.10.2012 Certificate Number: J10/11048.0B
DESCRIPTION
OF INSTRUMENT:
SLNo: VGG 353825 RANGE: 0 to 100mm MAKE: Kafer RESOLUTION: 0.01 mm GM 80/100 T
DIAL GAUGE MODEL: STANDARDS Equipment: Gauge Block Set Environmental Reference: conditions:
USED FOR CALIBRATION: Make: Tesa Temperature: JCP 01 W06 Serial Number: 002411 20.8°C Certificate Number: 217446 Humidity: 58%Rh
Work instruction
Results:
Measured (mm) Error (mm) ------~~~~---+--------~~~~~~--------~----------~~~~----------~ (Master) 0.000 5.000 __ 10.000
As Found As Left As Found
Applied (mm)
As Left
-----+-------------4------------~r_------------~--------------~
0.00
0.00
0.00
0.00
5.00
5.00
0.00
0.00
_ _j_ ...
__
1_O_.O_O __
1O_._OO --+__
O._O_O__ __..
-----t-
.__
O_.O_O_~_
.. ····1~~JI=t====}=o~=J=J=2==---::====1~=~O=:~-0-!2=~-----t-i~====O.::...:~-::~:.::..:-
Uncertainty
of measurement
is :!:.O.006mm
"!ote :
The standards used are traceable to national/international standards The reported expanded uncertainty is based on a standard uncertainty multiplied by acoverage factor k=2, providing a level of confidence of approximately 95%. Test Method Variation:NIL UUT Accuracy • ±O.05mm Calibrated by :Praveen. T. H
~l
1
I~\
-,"".~-", /~j~~~~~TIFICATE
):
\"i~""
~...~,\
This certificate provides traceability of measurem'e~tA?Jj$¢fJ.9(!itJit~fional standards, and to units of measurement realised at the National Physical Laboratory or other recognised national standiiraS"laIJ6(;!ltories. This certificate may not be reproduced other than in full, except with the prior written approval of the JCS Form 8.0, Date effec 15.03.201 O,Rev 0 Page 1 of 1
****
Approved by : Praveen. R~
\"
,~thj~·.t"~·
\
>I '" v
'I2729{l r.: -
~ "'~\{
tt
CPJ
".C
Website:
www.jansalcalibration.com