Professional Documents
Culture Documents
MINICOMB EDS
Description
The MINICOMB EDS is an electronic pressure switch for measuring,
switching and display of relative and absolute pressure and vacuum of
gaseous and liquid media.
The multifunctional MINICOMB EDS has a monochrome high-resolution
OLED full graphical display, indicating the actual value in selectable
pressure units. It offers the parameterization of the pressure switch according to VDMA standard and additional plain text menus. The parameters
are set via the ergonomic 3-button control panel.
In addition, the EDS MINICOMB is available with either 1 or 2 switching
outputs or 1 switching output with additional analog output (4 - 20 mA).
Depending on the application different switching functions are available:
In Hysteresis-Mode both switching point SP and reset point RP can be
adjusted freely. The switch switches back when the RP is reached. This
allows, for example, a simple 2-point control.
With the Window-Mode defined areas can be monitored. If the process
pressure is within the defined range the output is either closed or open.
The area is freely adjustable via FH (upper value) and FL (lower value).
With 2P versions, the switching modes can be configured differently for
both outputs.
Switching logic (NC or NO) as well as switching delay and reset delay
can be set freely in all modes.
Other features such as rotatable display indication, adjustable display
www.pinter-gmbh.com
Technical Data
Standard
Options
Function
Life Cycle
> 2,5x FS
on request
Burst Pressure
> 3,0x FS
on request
Vaccum Safety
-1 bar
Material Enclosure
Aluminium
on request
Aluminium
Al2O3
FKM
(NBR and FKM fro sub-base mouting)
-20...+85C
-20...+85C
Output Signals
on request
< 0,5% FS
< 0,5% FS
0,5% FS
adjustable > 0,5% FS - 100% FS / adjustable > 0,5% FS from switch point
Switching Function
Response Time
< 10ms
Switching Current DC
max. 0,5 A
600
Display
OLED
Menu Navigation
oriented to VDMA standard sheet 24574-1 (with addition plain text menu)
Menu Language
Supply
on request
Power Consumption
< 50 mA
Process Connection
Electrical Connection
Weight
approx. 0,3 kg
Further Functions
Further Options
www.pinter-gmbh.com
DIMENSIONS
MINICOMB-EDS
Torque
+1
MA = 12 Nm
Sealing Surface
Ra 2,4 m
A - coded
MINICOMB-EDS
Cylinder Screw
M5x30 DIN EN ISO 4762
(within supply range)
www.pinter-gmbh.com
ELECTRICAL DATA
Pin Assignment
Pin
Description
cable color
(cable available as sep.acc.)
+Ub
brown
OUT2 (PNP) / 4 - 20 mA
white
0 Volt
blue
OUT1 (PNP)
black
PE
grey
Circuit Diagrams
1P
1 PNP output
2P
2 PNP - outputs
1PA
1 PNP output + 1 analogue output
Switching Functions
In Standard-Mode, the output is switched after reaching the switching point (SP). Immediately when
lowering the pressure below th SP the switch switches back. The reset point (RP) corresponds to the
switching point SP and can not be set in standard mode.
Alternativly Hysteresis-Mode or Window-Mode aer available:
Hysteresis-Mode
Window-Mode
www.pinter-gmbh.com
MENU (EXCERPT)
Example based on a 2P version with switching function 1 HNC and switching function 2 FNO
Standard-Indication
Please refer to the manual for more information and the complete menu navigation.
www.pinter-gmbh.com
ORDER CODES
Order Code
Model
Material
Output
Pressure
Pressure Range
sub-base mounting
1
female thread
5
Aluminium / Ceramics / FKM
Stainless Steel 1.4404 / Aluminium / Ceramics / FKM
1x PNP
2x PNP
1x PNP + 4 - 20 mA
relative
absolute
A
B
C
0
5
0
06
-1...+1 bar
0 - 1 bar
0 - 1,6 bar
09
20
22
0 - 4 bar
0 - 6 bar
0 - 10 bar
0 - 16 bar
0 - 25 bar
sub base mounting standard
Process Connection
1/4 female thread
without further options
Further Options
cleaned for O2 service
1
2
-1...0 bar
0 - 2,5 bar
23
24
25
26
27
28
P
4
O
A
www.pinter-gmbh.com
Phone +49-6262-92670-0
Fax
+49-6262-92670-99
E-Mail
info@pinter-gmbh.de
Internet www.pinter-gmbh.com
DB.MINICOMB-EDS.14R1.EN