Professional Documents
Culture Documents
!
!
!
!!
!
!
!
!
!
C ON D UC T R . US E R MA NUA L.
!1
!!!
!
C ON D UC T R . US E R MA NUA L.
Choose live.
!2
!!!
!
!
!
C ON D UC T R . US E R MA NUA L.
!3
!!!
!
!
!
!
!
!
C ON D UC T R . US E R MA NUA L.
Conductr is a modular Ableton Live controller for iPad: a new way of relating to the touch
screen interface live. Its simple and intuitive, but very sophisticated at the same time made by musicians for musicians.
Conductr meets the needs expressed by artists all over the world in recent years for a
modular, bi-directional and customizable controller, with the ability to control parameters
by using gestures without having to constantly look at the screen. Conductr is designed
to take maximum advantage of multitouch technology singularities and its main goal is to
give an intuitive & unique user experience. It doesnt pretend to be a complete mirrored
Ableton Live replica for the iPad nor a hardware-imitation interface, but an instrument
specifically designed to interact with the software and intended to make sense on a
tablet.
Conductr is a freemium app. What you download for free is a basic version with limited
features: 4 tracks, 2 User Modules and 11 scenes. You can have unlimited features by
purchasing dierent Premium modules on the app itself.
!
!
Thank you for choosing Conductr!
!
!
!4
!!!
!
!
C ON D UC T R . US E R MA NUA L.
User Manual
!5
!!!
!
!
!
!
!
!
C ON D UC T R . US E R MA NUA L.
!
support.conductr.net
support@conductr.net
!6
!!!
!
TABLE OF CONTENTS:
!
C ON D UC T R . US E R MA NUA L.
1. REQUIREMENTS
10
2. FIRST SET-UP
10
10
10
10
11
11
11
11
12
12
12
13
13
14
3.1. SERVER
14
15
15
15
4. THE PLAYGROUND
16
!7
!!!
!
C ON D UC T R . US E R MA NUA L.
5. SYSTEM MODULES
5.1. CLIPS MODULE
17
21
21
22
24
24
25
26
27
29
29
6. USER MODULES
30
31
32
33
33
34
35
36
37
38
39
!8
!!!
!
C ON D UC T R . US E R MA NUA L.
39
40
41
42
42
43
43
44
!9
!!!
!
1. REQUIEREMENTS:
C ON D UC T R . US E R MA NUA L.
2.FIRST SET-UP:
2.1. FIRST SET-UP ON MAC:
2.1.1. Conductr server software set-up on Mac:
a. Go to conductr.net/downloads.
b. Download the server software CONDUCTR OS X SERVER on your computer.
c. Double-click on "ConductrServer.dmg".
d. Double-click on Install Conductr Server.
e. The installation assistant will guide you step by step.
f. During the installation process, the assistant will ask you to locate your Ableton
Live software in order to install the controller scripts.
g. You can install the controller scripts in all the Ableton Live versions you have.
h. During the installation process, the assistant will ask you if you want to
automatically launch the Conductr Server each time you boot up your computer. If
you do not want to, remember that you will have to launch it manually each time
!10
!!!
!
C ON D UC T R . US E R MA NUA L.
Once Ableton Live is running with Conductr as the selected controller and the
server is enabled, you can run Conductr on your iPad.
*NOTE: You will probably have to disconnect the preset firewall provided by most
telecom companies.
!
2.2. FIRST SET-UP ON WINDOWS:
2.2.1. Conductr server software set-up on Windows:
a. Go to conductr.net/downloads.
b. Download the server software CONDUCTR WINDOWS SERVER on your
computer.
c. Unzip the ConductrServer.zip file.
d. Double-click on setup-conductr.exe.
e. The installation assistant will guide you step by step.
f. During the installation process, the assistant will ask you to locate your Ableton
Live software in order to install the controller scripts.
g. You can install the controller scripts in all the Ableton Live versions you have.
!11
!!!
!
C ON D UC T R . US E R MA NUA L.
!
2.2.2. Conductr set-up on Ableton Live for Windows:
a. Launch Ableton Live.
b. Open up the preferences panel (on the menu bar: "Options" > "Preferences").
c. Select the "MIDI Sync" tab on the preferences panel.
d. Search for and select Conductr in the pull-down menu that will appear when
clicking on any empty cell in the "Control Surface" list.
Once Ableton Live is running with Conductr as the selected controller and the
server is enabled, you can run Conductr on your iPad.
!12
!!!
!
C ON D UC T R . US E R MA NUA L.
*NOTE: You will probably have to disconnect the preset firewall provided by most
telecom companies.
!13
!!!
!
3. START PLAYING WITH CONDUCTR:
C ON D UC T R . US E R MA NUA L.
Launch Conductr once you have launched Ableton Live on your computer.*
Once you have connected Conductr with Ableton Live, you can change your Ableton Live
set on your computer as many times as you want.
*NOTE: If you selected "NO" when the installation software asked you to automatically
launch the Conductr Server, you'll have to launch it manually each time you want to
use Conductr.
3.1. SERVER:
When launching Conductr, first to appear is the CONDUCTR SET UP screen.
!
Select the server you want to use.*
!14
!!!
!
C ON D UC T R . US E R MA NUA L.
*NOTE: Usually, only the computer connected to the AdHoc network will appear. Other
computers can appear eventually if more users are connected to the same network
and running the Conductr server.
Other devices can appear if you are working on a regular Wi-Fi network.
Once you have created or selected a project, tap on the "GO" bar to get to the
PLAYGROUND.
!!!
!
4. THE PLAYGROUND:
C ON D UC T R . US E R MA NUA L.
The first time you go into the PLAYGROUND, it will appear on a 4 empty views mode by
default. Each view has its corresponding side menu.
!
Each view can contain a module. You can change each view's module whenever you
want, even while playing live.
Choose which module you want on each view by tapping the MODULE SELECTION icon.
!16
!!!
!
C ON D UC T R . US E R MA NUA L.
When getting into a new project's PLAYGROUND for the first time, you can only load
SYSTEM MODULES (5.) until you set up your own USER MODULES (6.).
!17
!!!
!
C ON D UC T R . US E R MA NUA L.
4 views mode
!
3 views mode
!18
!!!
!
C ON D UC T R . US E R MA NUA L.
2 views mode
!19
!!!
!
The PLAYGROUND interface is set up using each view control icons menu:
!
C ON D UC T R . US E R MA NUA L.
!20
!!!
!
5. SYSTEM MODULES:
C ON D UC T R . US E R MA NUA L.
!
The CLIPS MODULE shows your clips grid like on Ableton Live's session view. Clips are
distributed in columns (tracks) and rows (scenes).
NOTE: In the Conductr freemium version, the CLIPS MODULE is limited to 4 tracks and
11 scenes. You can purchase the PREMIUM CLIPS MODULE to launch all your sets
clips without limitation (see 7: PREMIUM MODULES & PACKS IN-APP PURCHASE).
!21
!!!
!
C ON D UC T R . US E R MA NUA L.
!
2. You can unfold it by tapping on the group name on the CLIP MODULE top
control bar.
!22
!!!
!
C ON D UC T R . US E R MA NUA L.
3. Once the group is unfolded, you can trigger each clip individually (see a.
1).
4. To stop the group, double tap on any empty clip slot in the GROUP icon
track or double tap on the STOP button on the track's bottom controls
bar.
5. You can also stop a single clip within the group (see a.2).
c. Scenes control:
2. To stop a scene, tap on any empty scene PLAY icon on the MASTER
TRACK.
3.To stop all clips, double tap on the STOP button on the MASTER TRACK.
!23
!!!
!
C ON D UC T R . US E R MA NUA L.
When tapping the SHIFT button, you get quick access to each track's volume
fader and mute button and to the MASTER TRACK volume fader and LOCK
button*.
!24
!!!
!
C ON D UC T R . US E R MA NUA L.
*NOTE: The LOCK button allows you to lock and unlock the MASTER VOLUME. It can
be very useful in order to avoid accidental Master volume changes while playing live.
!
!
!25
!!!
!
The MIXER MODULE allows you to control your Ableton Live set mixer parameters:
!
C ON D UC T R . US E R MA NUA L.
Volume.
Panning.
Mute / Solo / Rec.
Sends.
The MIXER MODULE features Conductr's smart faders: to go straight to 0 dB, double tap
near the 0 dB mark and the fader will automatically move there.
Conductr's smart faders can also be used to silence a track without muting it: double tap
near the minimum volume mark and the fader will automatically move there.
Conductr's smart faders also feature an acceleration detector to adapt to the velocity and
impulse of the user's touch.
NOTE: In the Conductr freemium version, the MIXER MODULE is limited to 4 tracks.
You can purchase the PREMIUM MIXER MODULE to control all your tracks mixer
parameters without limitation (See 7: PREMIUM MODULES & PACKS IN-APP
PURCHASE).
!26
!!!
!
C ON D UC T R . US E R MA NUA L.
You can link the MIXER MODULE to a CLIP MODULE. Double tap on the MASTER
button of each module you want to link and all of them will move in sync. To
detach, double tap again on the MASTER button of the modules you want to
detach.
When tapping the SHIFT button, you get quick access to each track's panning,
solo and record controls, and to the MASTER VOLUME pan, LOCK* and LIMITER**.
Panning is controlled with Conductr's smart crossfaders: to get back to 0,
double tap near the center bar and the crossfader will automatically move there.
!27
!!!
!
C ON D UC T R . US E R MA NUA L.
!
*NOTE: The LOCK button allows you to lock and unlock the MASTER VOLUME. It can
be very useful in order to avoid accidental MASTER VOLUME changes while playing
live.
**NOTE: The LIMITER button blocks (0 dBs by default) and unblocks (up to 6 dBs) the
tracks maximum volume.
!28
!!!
!
C ON D UC T R . US E R MA NUA L.
!
When tapping the SENDS button, you enable the MIXER MODULE SENDS mode.
While on this mode, you can control how much signal is being sent from the
tracks to the return channels.
Tap again on the SENDS button to get back to the standard MIXER MODULE view.
!
5.2.4. MIXER MODULE SENDS mode + SHIFT:
While on the MIXER MODULE SENDS mode, you can tap the SHIFT button to
control each single track sends.
!
!29
!!!
!
C ON D UC T R . US E R MA NUA L.
Tap again on the SHIFT button to get back to the standard MIXER MODULE
SENDS view.
!
!
5.3. MASTER MODULE:
The MASTER MODULE features MASTER VOLUME, CUE VOLUME, A/B CROSSFADE and
the usual transport unit controls:
PLAY
STOP
RECORD
NUDGE UP
NUDGE DOWN
METRONOME
TEMPO
FINE TEMPO
TAP
BAR
OVERDUB
UNDO
REDO
LOOP
!30
!!!
!
C ON D UC T R . US E R MA NUA L.
TEMPO, FINE TEMPO and BAR values can be modified by dragging their icons up and
down.
!
!
6. USER MODULES:
You can create as many USER MODULES as you want with Conductr.
Each USER MODULE can feature up to 8 parameter controls.
These parameters can belong to any device assigned to any track on your Ableton Live
set. So you can control dierent devices, tracks, sends, etc. within the same USER
MODULE.
Any plug-in you use in your Ableton Live set can be controlled on your USER MODULES.
USER MODULES can be created, edited and deleted live, without aecting other modules
running.
!31
!!!
!
C ON D UC T R . US E R MA NUA L.
NOTE: In the Conductr freemium version, you can only create 2 USER MODULES. You
can purchase the PREMIUM USER MODULES to create as many modules as you want
without limitation (See 7: PREMIUM MODULES & PACKS IN-APP PURCHASE).
!
6.1. USER MODULES SET-UP:
a. In the PLAYGROUND, tap on the MODULES SELECTION icon on any view's side menu.
b. Tap on the USER MODULES SET-UP icon on the side menu.
!
c. You will get to the USER MODULES SET-UP screen:
!32
!!!
!
C ON D UC T R . US E R MA NUA L.
d. On the left menu AVAILABLE MODULES, tap on ADD.
e. A new USER MODULE will be added to the list.
f. You can start setting up your USER MODULE on the right menu.
Once you are done with the set-up, you can go back to the PLAYGROUND by tapping on
the GO TO PLAYGROUND bottom bar.
!
!
!33
!!!
!
C ON D UC T R . US E R MA NUA L.
*NOTE: This function is optional. If you do not name your USER MODULE, it will be
saved with its default name.
WARNING: The LEARN FUNCTION may not work if you try to add a parameter which is
already automatized on you Ableton Live project while playing it. If you want to do so,
use the LEARN FUNCTION when the project is not running.
!
6.4. EDIT AND DELETE PARAMETERS ON A USER MODULE:
a. To delete a parameter, tap on DELETE/REARRANGE. Tap on the button on the left side
of the parameter you want to delete. A "Delete" button will appear on the parameter's right
side. Tap on it and the parameter will be eliminated from your USER MODULE. Tap on
"DONE" to finish.
b. To change the parameters list order within the module, tap on DELETE/REARRANGE.
The LIST ORDER icon will appear on each parameter's right side. Tap on the icon and
drag the parameter to the position where you want it. Tap on "DONE" to finish.
!
Once you are done with the parameter edits, you can go back to the PLAYGROUND by
tapping on the GO TO PLAYGROUND bottom bar.
!
!
!34
!!!
!
C ON D UC T R . US E R MA NUA L.
!
You can navigate this list from top to bottom. Drag it to see its content.
Select the USER MODULE you want to use. You can change each view module whenever
you want, even while playing live by tapping the MODULES SELECTION icon.
!35
!!!
!
C ON D UC T R . US E R MA NUA L.
Like the SYSTEM MODULES, the USER MODULES can adapt at any time to any view mode
you wish (see 4.1).
typology:
!
FADERS
Parameters that range from a minimum value (bottom) to a maximum value (top).
CROSSFADERS
Parameters that range from the center to a minimum value (bottom) and from
!36
!!!
!
C ON D UC T R . US E R MA NUA L.
SCALES (Step selectors)
Quantified parameters.
BUTTONS
2 position parameters (ON/OFF).
!
6.5.2. Reset and value memories:
a. You can recover a USER MODULE parameters original values (the values they
had when the USER MODULE was selected on the PLAYGROUND) whenever you
want. Tap on the RESET icon on your USER MODULE side menu.
b. You can save a USER MODULE parameters values to memory by dragging the
RESET icon into the module. The parameter value will be saved when you drop it*.
You can load that parameter value by tapping on the RESET icon.
*NOTE: When a parameter value is saved, the previous one is eliminated. If you save a
value after changing the parameters original values (the values they had when the
USER MODULE was selected on the PLAYGROUND), these will be erased.
!37
!!!
!
C ON D UC T R . US E R MA NUA L.
b. Tap on the MULTITOUCH MODE icon on your USER MODULE side menu.
!!!
!
C ON D UC T R . US E R MA NUA L.
d. If you want to change the control order (changing how many fingers you want
to use), we recommend you to take them o the screen surface first.
*NOTE: In order to use the MULTITOUCH MODE on Conductr, you must disable the
"Multitasking Gestures" feature on your iPad first ("Adjustments" > "General" >
"Multitasking Gestures").
about the changes done on the Ableton Live set. No need to map it again!
!
!
!39
!!!
!
C ON D UC T R . US E R MA NUA L.
!
!
*NOTE: To map a VST, insert it in a Rack and map the Macro parameters.
!40
!!!
!
C ON D UC T R . US E R MA NUA L.
!
!
tracks name.
Do not work with various Conductr projects on a single Ableton Live set.
If a parameter appears broken and it doesnt respond appropriately, it can be
refreshed by moving the devices or tracks position on the Ableton Live set.
We recommend to use a dierent Conductr project for each Ableton Live Set.
In order to get an easy and quick interrelationship, we recommend to name each
!41
!!!
!
7. PREMIUM MODULES & PACKS IN-APP PURCHASE:
C ON D UC T R . US E R MA NUA L.
FULL PACK
The Full Pack includes everything: the Premium Clips & Mixer Pack and the Premium
User Modules Set.
!
!
!42
!!!
!
C ON D UC T R . US E R MA NUA L.
!
!
!
Select the product you want to buy.
Follow the Appstore instructions.
In case you have any issue, please get in touch with the Conductr Support Team at
support@conductr.net.
!43
!!!
!
C ON D UC T R . US E R MA NUA L.
PURCHASE button on the Conductr Store (located in the CONDUCTR SET UP screen) to
recover your purchases.
In case you have purchased a Premium Module or a Preemium Pack and you have
deleted Conductr, simply download the app again and press the RESTORE PURCHASE
button on the Conductr Store (located in the CONDUCTR SET UP screen) to recover
your purchases.
In case you have any issue, please get in touch with the Conductr Support Team at
support@conductr.net.
!
!
In case you are an early user, you will automatically get the FULL PACK with no additional
expenses when updating to Conductr v. 1.1.
Please be sure to have iCloud enabled when upgrading to Conductr v. 1.1. iCloud will
keep an activation code. That way, youll always be able to recover your FULL PACK in
case you get a new iPad.
In case you are an early user working on iOS 6 or later and deleted the app before the
update to version 1.1., you will automatically get the FULL PACK with no additional
expenses when downloading Conductr v. 1.1.
In case you are an early user working on iOS 5 and deleted the app before the update
to version 1.1., please get in touch with the Conductr Support Team at
support@conductr.net with your sales receipt to recover it.
In case you are an early user, we strongly recommend to do not delete the app. In case
you have any issue, please get in touch with the Conductr Support Team at
support@conductr.net.
!44
!!!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
C ON D UC T R . US E R MA NUA L.
!45
!!!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
C ON D UC T R . US E R MA NUA L.
Do not hesitate to get in touch with the Conductr Support Team for any doubt or
further explanation at Conductrs support page (support.conductr.net) or write to
support@conductr.net.
!46
!!!
!
C ON D UC T R . US E R MA NUA L.
!
APPSTORE.COM/CONDUCTR
!47