Professional Documents
Culture Documents
2. To prepare the solid model of given fig with required dimensions in isometric representation by using
Pro-E.
4. Determine the nodal deflections, reaction forces, and stress for the truss system shown below
(E = 200GPa, A = 3250mm2).
5. The cantilever beam shown in the following figure, Find nodal deflections, reaction forces,
and stress.
6. The Simple Conduction Example is constrained as shown in the following figure. Thermal
conductivity (k) of the material is 10 W/m*C and the block is assumed to be infinitely long.
7. To determine the deflection, stress for the following problem having outside diameter of
25mm and a wall thickness of 2mm. ,E=70000 , Poissons ratio=0.33
10. To determine the deflection of beam. The beam is to be made of steel with a modulus of
elasticity of 200 GPa.
11. To determine the maximum deflection and maximum stress when the distributed load of
1000 N/m (1 N/mm) will be applied to a solid steel beam with a rectangular cross section as
shown in the figure below. The cross-section of the beam is 10mm x 10mm while the
modulus of elasticity of the steel is 200GPa. IZZ: 833.333, PRXY: 0.3
13. To determine the maximum deflection and frequency value of buckling analysis
14. To determine the nodal deflections, reaction forces, and stress for the truss system shown
below (E = 200GPa, A = 3250mm2).
Internal Examiner
External Examiner
Batch
Tentative Period
I B.Tech- A&B
II B.Tech-A&B
AutoCAD
III B.Tech-A&B
IV B.Tech-A&B
Uni-Graphics
H.O.D