Professional Documents
Culture Documents
Supply & installation of Powder coated GI tray without Cover for exposed
copper piping including supports as requiredat site of following sizes:
a)
400 mm wide
RM
30
b)
300 mm wide
RM
30
c)
250 mm wide
RM
50
a)
200 mm wide
RM
50
b)
150 mm wide
RM
60
c)
100 mm wide
RM
60
2.3
Cable Trays :
i)
ii)
Supply and installation of perforated type cable trays of the following sizes
fabricated out of perforated hot dip galvanised (Quoted G.I. GALVANIZED
WITHOOUT COVER) MS sheets of minimum 2 mm thick with 75 mm flange
to be installed horizontally or vertically. The cable tray shall be complete
including cost of bends, elbows, cross, tees, reducers etc as per
drawings/site condition and rate shall include cost of anchor fasteners,
screws, nuts, bolts and misc. other fixing hardware painting of support
structure etc as required.
Note :
Structural steel such as ISMC, ISA, flats, rods etc to be used for cable
tray/bus duct support shall be included in the cost of tray.
The cable tray shall be factory built. Bidder shall include in his price, required
numbers of Tees, Crosses, Bends, Elbows etc as required as per actual site
conditions. Bidder may refer to the drawings for estimation purpose.
Perforated Type Cable Tray :
a)
b)
c)
d)
e)
f)
900 mm x 50 x 50 x 2 mm thick
600 mm x 50 x 50 x 2 mm thick
450 mm x 40 x 40 x 2 mm thick
300 mm x 40 x 40 x 2 mm thick
150 mm x 25 x 25 x 2 mm thick
75 mm x 25 x 25 x 2 mm thick
RM
RM
RM
RM
RM
RM
14
15
20
20
30
50