Hello every one ,I am going to upload the home automation system circuit
diagram without microcontroller.
Sometimes unfortunately we may forget switch off the appliances while
going to the outside and we face the problems to switch off these devices when we are out of home. To solve these types of problems this article explains you how to design a simple circuit, which will on the devices remotely and devices will off automatically after the specified time interval. Till now we have seen so many circuits to control the devices or appliances from the remote place but the main advantage of this circuit is simple because we are not using any microcontroller in this circuit and it uses the components which are easily available in the market. The main principle used in this circuit is DTMF communication. DTMF is acronym for Dual-Tone Multi-Frequency. When you make a call to customer care service they will ask you to press the numbers to provide the appropriate services. If you think about how they are recognizing the pressed number then DTMF comes on the picture. These generated tones are decoded at switching centre to determine which button is pressed. Now we have to use this DTMF tones to control the devices from remote area. To decode these DTMF tones at receiver we need to use a DTMF decoder. Decoder IC converts these tones into the digital form. For example if you press number 5 in mobile keypad then the output of DTMF decoder is 0101.