Professional Documents
Culture Documents
Introduction
The HS2000 Centrifuge has been developed to give better
performance in two important ways
1. A number of innovative design features were developed that
allow production of the machine at a lower cost while still
maintaining the high volume, high capacity performance.
2. The power requirements are less, resulting in more economic
operation and greater flexibility in installation locations. The
main drive is 75HP and the back drive is 30HP, resulting in
105HP total. It can be run on a 100 amp service connection if
necessary.
The HS2000 was developed with many of the innovative features
of the 2172 resulting in a high speed/high volume centrifuge with
similar capacity as the 2172.
Description
HS-2000 General
Overall Length 115 in
Overall Width 80 7/8 in
Overall height 50 1/4 in
Overall weight 9500 lbs
Bowl Length 60 in
Bowl Diameter 18 in
2934 mm
2054 m
1276 mm
4309 mm
1544 mm
457 mm
Power Requirement
Main Drive Motor
75 hp
Back Drive Motor
30 hp
56 kW
22 kW
Rotating Assembly
Conveyor Pitch6 in 152 mm
Bowl Speeds 3070 rpm (max)
G force
500 to 2400 g variable
Gearbox type Single-stage, Cyclogear
Gearbox ratio 59:1
Capacity
10-12 tons per hour solids discharge capacity,
depending on feed properties
GFeed Rate
Force
GPM
Feed
PPG
Effluent
PPG
Feed
D50
Effluent
D50
Solids
PPG
HS-2000
2076
80
8.9
8.7
4.5
3.0
16.5
60
8.8
8.6
4.7
4.4
15.2
GFeed Rate
Force
GPM
Feed
PPG
Effluent
PPG
Feed
D50
Effluent
D50
Solids
PPG
431
140
16.3
13.6
N/A
N/A
28.1
1127
130
13.0
11.3
N/A
N/A
23.8
Test One
HS-2000
Test Two
HS-2000
Benefits