The document provides instructions for a task to analyze cuts on both sides of a highway oriented N 30° E through a granitic rock mass. It lists two sets of discontinuities: (1) N 120° E, dip 30° NW and (2) N 30° W, dip 45° NE. Using a kinematic analysis and assuming an internal friction angle (φj) of 25°, the task is to find the maximum safe angles for the cuts on both sides of the highway.
The document provides instructions for a task to analyze cuts on both sides of a highway oriented N 30° E through a granitic rock mass. It lists two sets of discontinuities: (1) N 120° E, dip 30° NW and (2) N 30° W, dip 45° NE. Using a kinematic analysis and assuming an internal friction angle (φj) of 25°, the task is to find the maximum safe angles for the cuts on both sides of the highway.
The document provides instructions for a task to analyze cuts on both sides of a highway oriented N 30° E through a granitic rock mass. It lists two sets of discontinuities: (1) N 120° E, dip 30° NW and (2) N 30° W, dip 45° NE. Using a kinematic analysis and assuming an internal friction angle (φj) of 25°, the task is to find the maximum safe angles for the cuts on both sides of the highway.
FAKULTAS TEKNIK Kampus UNSOED - Jl. Mayjend Sungkono Km 05 Blater Purbalingga
TUGAS TEKNIK BATUAN DAN TEROWONGAN
TANGGAL 02 DESEMBER 2016 Using a kinematic analysis find the maximum safe angles for cuts on both sides of a highway oriented N 30 E, through a granitic rock mass with the following sets of discontinuities (1) N 120 E, dip 30 NW (2) N 30 W, dip 45 NE Assume j = 25
Geology and Slope Stability Analysis Using Markland Method On Road Segment of Piyungan - Patuk, Sleman and Gunungkidul Regencies, Yogyakarta Special Region, Indonesia
Sunspot Magnetic Fields for the I.G.Y.: With Analysis and Daily Maps Prepared at the Crimean Astrophysical Observatory Under the Direction of Professor A. B. Severny