This document outlines the test specimen requirements for polished marble slabs, including 5 samples for water absorption and density testing that are cubes measuring 60mm x 60mm x 60mm, 20 samples for compressive strength testing - 10 perpendicular to the bed and 10 parallel, 10 samples for flexural strength testing that are thin cuboids, and 10 samples for modulus of rupture testing that are cuboids. The samples require specific dimensions and surface finishes.
This document outlines the test specimen requirements for polished marble slabs, including 5 samples for water absorption and density testing that are cubes measuring 60mm x 60mm x 60mm, 20 samples for compressive strength testing - 10 perpendicular to the bed and 10 parallel, 10 samples for flexural strength testing that are thin cuboids, and 10 samples for modulus of rupture testing that are cuboids. The samples require specific dimensions and surface finishes.
This document outlines the test specimen requirements for polished marble slabs, including 5 samples for water absorption and density testing that are cubes measuring 60mm x 60mm x 60mm, 20 samples for compressive strength testing - 10 perpendicular to the bed and 10 parallel, 10 samples for flexural strength testing that are thin cuboids, and 10 samples for modulus of rupture testing that are cuboids. The samples require specific dimensions and surface finishes.
Example shapecube with 60 mm 60 mm 60 mm dimensions Surface quality- All surfaces shall be reasonably smooth. Saw or core drill samples are considered satisfactory. Otherwise samples shall be finished with No. 80 abrasive. 2. Compressive strength 10 samples perpendicular to bed (or rift) 10 samples parallel to bed (or rift) Sample Shape- cube with 60 mm 60 mm 60 mm dimensions 3. Flexural strength - 10 samples Sample Shape- Thin cuboids Dimensional requirementsWidth -102 mm Thickness 32 mm Length 381 mm Surface quality- The specimen shall have a fine abrasive finish on the planes perpendicular to the load and a fine saw finish on the other four planes. 4.
Modulus of Rupture - 10 samples
Sample Shape- cuboids
Dimensional requirementsWidth -101.6 mm Thickness 57.2 mm Length 203.2 mm Surface quality- The specimen shall have a fine abrasive finish on the planes perpendicular to the load and a fine saw finish on the other four planes.