Professional Documents
Culture Documents
Disclaimer: The information on this page has not been checked by an independent person. Use this information at your
own risk.
ROYMECH
Home
Surface Texture Index Page
ISO 1302:1992 which uses N numbers..These are not included in BS EN ISO 1302:2002
The table below provide equivalent values for...
the Average Roughness R a , the USA R a Values, the approximate R t values, the N numbers, the obsolete triangular
representations,
and some manufacturing finishes. There is no mathematical relationship between R a and R t The R t values shown in the table
below are very approximate and should only be used for guidance...
For notes describing the meanings of R a, R t etc. reference links below and Surface Finish
Notes:
m = 10 -6 metre
inch = 10 -6 inch
R a-m - 0.025 0.05 0.1 0.2 0.4 0.8 1.6 3.2 6.3 12.5 25 50
R a- inch 1 2 4 8 16 32 63 125 250 500 1000 2000
R t (R y ) -m 0,25 0,5 1 2 4 8 16 32
N-Grade N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12
Triangular
Indication
Finish Lapping/Superfinishing Ground Finishes Smooth Turned Medium Turned Rough Machined
1. iCrank...
A link to further information on Surface Texture
2. Bright Burnishing Tools Private Ltd.... Lots of useful relevant information on one page
3. MD metric Surfruff... Everything you need to know on one page
4. Hallite UK - Surface Roughness... Useful Notes.
1 of 1 07-05-2015 15:37