Professional Documents
Culture Documents
Article Info.
1. Home
2. Article Info.
Volume 32 Issue 1
/
Pages.17-28
/
2019
/
1225-1070(pISSN)
/
2508-4046(eISSN)
DOI QR Code
1 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
Received : 2019.01.09
Accepted : 2019.01.24
Published : 2019.01.31
Abstract
Jominy hardenability curves of low alloy steel containing less than 5 wt.% of alloying
elements in total were calculated by applying Scheil's rule of additivity to pre-calculated
isothermal transformation curve. Isothermal transformation curve for each phase in steel
was approximated as a simple mathematical equation by using Kirkaldy's approach and
all coefficients in the equation were estimated from experimental temperature-time-
transformation (TTT) and/or continuous cooling transformation (CCT) data in the
literature. Then jominy test with simple boundary conditions was performed in computer
by applying the finite difference scheme. The resultant cooling curves at each location
along a longitudinal direction of Jominy bar were applied to calculate phase fractions as
well as mechanical properties such as micro Vickers hardness. The simulated results
were compared with experimental CCT data and Jominy curves in the literature.
Keywords
File
Download PDF
2 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
3 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
Fig. 3. A calculated TTT diagram denoting the domain of each phase of SCM415 low
alloy steel.
4 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
5 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
Fig. 5. (a) TTT diagram and (b) CCT diagram of 16MnCr5 Carburizing low alloy steel.
Fig. 7. (Left) Changes in phase fractions of various phases in 16MnCr5 steel. (Right)
Hardness changes as a function of distance from the end of Jominy bar. Note that all
symbols were referred from Fig. 3 showing CCT diagram of 16MnCr5 steel.
6 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
7 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
Fig. 6. Changes in phase fractions of martensite (red), bainite (blue), and ferrite (olive) as
a function of cooling time between 800°C and 500°C in Jominy bar of 16MnCr5 steel
(dot for JMatPro, solid for this study, and symbol for experimental CCT data).
8 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
Fig. 8. Comparison of experimental cooling data from CCT diagram shown in Fig. 5 and
calculated cooling curve at jominy distance of 13 mm.
Fig. 10. (Left) Changes in phase fractions of various phases in 50CrMo4 steel. (Right)
Hardness changes as a function of distance from the end of Jomiiny bar. Note that all
symbols were referred from Fig. 3 showing CCT diagram of 50CrMo4 steel.
9 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
Table 2. Composition of low alloy steel and heat treating conditions used in the
calculation
References
10 of 11 16/09/2021, 19:23
Calculation of Jominy Hardenability Curve of Low Alloy Steels from... https://www.koreascience.or.kr/article/JAKO201911338887509.kr#full...
/10.1007/BF02656606
17. M. Suehiro et al. : Transactions ISIJ, 27 (1987) 437.
18. R. A. Grange, C. R. Hribal, and L. F. Porter : Metallurgical Transactions A, 8A (1977)
1775.
19. Licenced by Total Materia, sourced from www.totalmateria.com (2017).
20. Practical data for metallurgists, Timken Steel, sourced from www.timkensteel.com.
11 of 11 16/09/2021, 19:23