You are on page 1of 3

STABITEX ETR

Wash & Wear Finish Agent

STABITEX ETR is applied for the wash- and wear finish with extremely low
formaldehyde content, of cellulose and its blends with synthetics. It meets the
requirements as per Eco-Tex Standard 100.

PRODUCT FEATURES

Guaranteed extremely low formaldehyde content, < 75 PPM as per


Japanese Law 112
Enables a distinct decrease of the limits as per MAK and TA air
Gives optimum wash- and wear effects
Improves the crease recovery
Imparts good residual shrinkage values
Shows excellent wash- and dry-cleaning resistant effects
Is suitable for the dry cross-linking as well as for the moist and wet cross-
linking processes
Is suitable for the finishing of garments

COMPOSITION

Di-methylol-dihydroxy-ethylene urea, methylized, in water

TYPICAL PROPERTIES

Appearance Transparent, yellowish


Consistency Liquid
pH-value 4.0 5.5
Density (20 C) 1.2 g/cm3
Compatibility Can be combined with anionic, cationic and nonionic
auxiliaries, pre-trials are recommended.
APPLICATION

Operation Resin finishing


Substrate Woven and knit goods of cellulose and its blends with
synthetics
Aggregate Padding machine
Dissolving method Direct dosage, a pre-dilution with water
Qty of application 30 100 g/l STABITEX ETR
Catalysts 20% magnesium chloride, calculated on STABITEX ETR,
possible with the addition of 0.5 g/l citric acid for viscose or
30 % STABITEX CAT
Drying 110 120 C
Curing 3 minutes at 150 C. Shock curing at 30 60 sec at
180 170 C
Guide recipes

Crease resistant finish of viscose apparel fabric


30.0 - 40.0 g/l STABITEX ETR
20.0 - 30.0 g/l ADALIN K
20.0 - 30.0 g/l ADASIL ME
10.0 - 20.0 g/l BELSOFT 200
20.0 g/l magnesium chloride
1.0 g/l FORYL 100
pH-value : < 5.5
Application : dry/wet
Liquor pick-up : 100%
Drying : 110 C
Curing : 3 minutes at 150 C
Stain repellent finish of viscose lining
60.0 g/l STABITEX ETR
30.0 g/l DURASOL 5071
30.0 g/l REPELLAN KFC
20.0 g/l REPELLAN HY-N
30.0 g/l STABIFIX OF
12.0 g/l magnesium chloride
pH-value : < 5.5
Application : dry/wet
Liquor pick-up : 100%
Shock curing : 60 seconds at 170 C
Calandering

355733634.doc Page 2
Note: Guide recipes for ;
1. Wet and moist cross-linking as well as for garment
finishing
2. Wash- and wear finish of cotton poplin shirting
3. Wash-and-wear finish of polyester/cotton jersey and
cotton-jersey printed goods
4. Permanent chintz finish of polyester/cotton and cotton
home furnishing fabrics
can be obtained from our specialists on demand.

HANDLING AND STORAGE

Storage stability: At least 12 months under normal conditions.


Product change at temperatures BELOW 0 (C) possible.
Change reversible by heating and stirring
Storage and transport Storage and transport NOT UNDER 0C and NOT
ABOVE +50C. Otherwise product is no longer usable
Further remarks: References to measure in case of accidents and fires as
well as further information about ecology, toxicology,
transport and storage are given in the separate Material
Safety Data Sheet.

The indications given herein correspond to practical experiences. Owing to the differences in local conditions they cannot
claim to be complete, so that any liabilities also with a view to claims of third parties are excluded. Cognis
Deutschland GmbH, Duesseldorf.

355733634.doc Page 3

You might also like