Professional Documents
Culture Documents
Parametros - Balanceo de Trafico - HUAWEI GSM PDF
Parametros - Balanceo de Trafico - HUAWEI GSM PDF
Huawei
Cell Attributes
Cell Layer (Common setting)
Description:
This parameter specifies the layer where a cell is located. The network designed by Huawei
has four layers: Pico, Micro, Macro, and Umbrella, numbered 1-4 respectively.
Configuration Policy:
Config value: Layer 3(GSM900) Layer 2(DCS1800).
RXLEV_ACCESS_MIN (Optimization for Traffic Balance)
Description:
This parameter specifies the minimum receive level of an MS to access the BSS.
The value of this parameter ranges from 0 to 63 (corresponding to -110 dBm to -47 dBm).
Configuration Policy:
Config value: 6 (-104dbm->GSM900) 8 (-102dBm->DCS1800)
Idle Mode
CRO (Optimization for Traffic Balance)
Configuration policy:
Config value: 0 dB (GSM900) 5 dB(DCS1800)
The settings of RXLEV-ACCESS-MIN and CRO should guarantee that cells with same
priority have the same cell reselect offset.
C2=C1+CRO-TO*H(PT-T) (PT<>31)
C2=C1-CRO (PT= 31)
H(x)=0 if x<0; H(x)=1 if x>=0
Cell A Cell B
GSM900 DCS1800
RX_LEV Thr
EDGE Condition
Handover 1800->1800
Time
Handover 1800->900
P/N
Handover 900->900
P: Watch Time
N: Valid Time
P: Watch Time
N: Valid Time
GSM900 Cell
Lay 3
GSM1800 Cell
Lay 2
Serving Cell Neighboring Cell
Time
Watch Time / Valid Time PBGT Condition (Same Band)
Handover 1800->1800
Handover 900->900
126-119=7dB>4dB
126dB 119dB
NR1994D RXLEV_ACCESS_MIN 8 12
Comparison
for TCH
Congestion