Professional Documents
Culture Documents
Type of Drawout
Type of Drawout
Okken
High dependability
http://www.panelbuilders.schneider-electric.com
Contents
Presentation 2
Solution overview 10
Functional units 14
Cubicles 32
Example 50
Installation 52
Okken performances 54
1
Presentation Fields of applications
Requirements and solutions
Solutions > Intelligence in the motor control > Specific anti-corrosion treatment > Tightness ensured by IP54
and the electrical distribution. on conductive parts. guaranteed parts for the dusty
> Dependability. > Tightness ensured by IP54 and/or damp environment.
> Rapid restarting after an incident. guaranteed parts for the dusty > Fault prevention by intelligent
> Internal arc protection. and/or damp environment. motor control centers (iMCC).
> DEP Shell certification.
Solutions > Robustness to vibrations 5G. > Feeders on dsconnectable and > Robustness to vibrations.
> Internal arc protection. withdrawable systems. > Marine certification (DNV).
> Withdrawable solutions > Specific anti-corrosion treatment > Salty environment.
on conductive parts.
2
Presentation Fields of applications
Functions
3
Presentation Okken solution
Motor Sys intelligent Power & Motor
Control Center (iPMCC)
Our MotorSys iPMCC solutions for continuous and critical processes were developed through
our specific expertise in energy and industrial process control management.
Forming the keystone of the energy efficiency of your process units, they incorporate a range
of functions to supply power (intelligent Power Control Centre - iPCC), start up, control, protect
and monitor your LV network electric motors and loads (intelligent Motor Control Centre -
iMCC). The breadth of the range ensures that all types of continuous and critical process as well
as specific requirements are covered.
1
Remote control and
1
4
Presentation Okken solution
Motor Sys intelligent Power & Motor
Control Center (iPMCC)
MotorSysTM iPMCC
solutions integrate
perfectly into your site
network infrastructure,
whatever the
communication
protocol, but also into
energy management
control systems
and process
control systems
2
Example of a
MotorSysTM iPMCC
solution integrated
into a site
infrastructure
5
Presentation Okken solution
Innovation
70-M cubicles
Distribution busbar
Installed in a partitioned compartment at the rear of the drawers
area, it consists of 8 mm thick bars whose cross-section depend
tr ic upon the current to be distributed in the cubicle.
r Elec
e
h n eid tent The distribution busbar system can be single or double. The architecture depends on
Sc pa the electrical performance and on the functional unit size (full width or half width).
The distribution busbar is extremely safe: the tap-off outlets make the busbar
unaccessible to operators. Tap-off outlets open and close when the functional unit
moves between connected and test position.
In double busbar architecture, the current flow is balanced in both vertical busbars
thanks to the link system.
Connections to the distribution busbars and fishplating are made without drilling.
The tightening screw devices used to secure the connection go through the gap
between the horizontal bars.
ec tric
d e r El
nei ent
Sch pat
Auxiliaries connection
ectric
r El
The innovative mechanism guarantees that the control contacts are connected
d e when the drawer is in service or test position.
nei ent
Sch pat
6
Presentation Okken solution
Innovation
Drawer positions
Drawers operation is very simple. Using the indexing pushbutton, the operator
can simply move the drawer in the draw-in, test, draw-out positions.
Each position are mechanically marked with a mechanical indicator on the
drawer sides.
Draw-in
bb The functional unit is operational.
bb Power and auxiliaries are connected.
Test
bb The functional unit is not operational.
bb Only auxiliaries are connected.
bb Allow padlocking.
bb It allows the functional unit verification.
bb Allow maintenance on the process.
Draw out
bb The functional unit is not operational.
bb Power and auxiliaries are disconnected.
bb Allow maintenance on the process.
Withdrawn
bb The drawer can be fully extracted.
bb Allow quick replacement.
bb Allow switchboard live change.
7
Presentation Okken solution
Implementation
Continuity of supply
> Withdrawable feeders (in rack) for rapid workings.
> The switchboards must be reconfigured live.
> Rapid restart after an incident.
8
Presentation Okken solution
Implementation
5 levels of service
Shutting down the whole switchboard. Shutting down only Shutting down only the concerned functional unit
the concerned without connections handlings.
Maintenance functional unit with
connections
handlings.
Shutting Addition of a Addition of a functional unit without shutting down the switchboard, free
down the functional unit in addition in non-equiped spare slots.
Evolution whole pre-equiped spare
slots.
switchboard.
9
Solution overview PCC device cubicles
wer ower
igh po High p Mixed
Very h eders
s/feed
ers eders
o m e r c o m ers/fe c o m ers/fe
inc in in
cubicle cubicle cubicle
10
Solution overview PCC device cubicles
r
h powe ower nsatio
n
ed hig high p Compe witch
Op t im iz
ede r s iz e d onic Fuse-s
ers/fe Optim eders & harm s cubic
le
incom ers/fe feeder
cubicle incom filterin
g
cubicle
NW08-32 NT08-16/NS800-1600 - -
Power factor
NW08-32 NT08-16/NS800-1600 Jean Mller
compensation
- - - -
11
Solution overview PCC device cubicles
al al
Electric n Electric
utio ution
distrib s distrib le
drawe
r s cubic
feeder
- -
MCC
Okken 70-2
For electrical distribution, 70-2 is an innovative solution, robust,
reliable and secure.
Schneider Electric Polyfast provide a high level of people safety
in the most difficult conditions.
12
Solution overview MCC device cubicles
d
ized fo
r
eders le spee
Optim ers/fe Variab f t
o m so
rawers
In c
cubicle drive &
MCC d c u bicle
starter
- - -
- - -
- - -
Okken 70-M
For MCC application drawers, 70-M is an optimized solution, robust,
reliable and secure.
The 70-M back to back configuration is a huge space saving.
The 70-M satisfy the motor control needs ot the most demanding
processes.
13
Functional units Feeders Service Index
The applications
continuity of service is:
Shutting down the whole Shutting down the whole Shutting down the whole
Not required switchboard switchboard switchboard
Shutting down only the Shutting down only the Addition of a functional
concerned functional unit concerned functional unit unit in pre-equiped spare
Wanted with connections slots
handling
Shutting down only the Shutting down only the Addition of a functional
concerned functional unit concerned functional unit unit without shutting
Examples
I want to determine the I want to determine whether I want to determine whether my
consequences of mechanical my switchboard can satisfy a switchboard can be upgraded in
padlocking or electrical locking on maintenance requirement: the future:
my switchboard:
2 3 3
concerned functional unit concerned. It should without powering down the
be replaced without disturbing with switchboard. This should be done
the connections. in a location without equipment,
within the limits stipulated by the
manufacturer.
plug-in feeder
I would like this operation to shut I would like the maintenance I would like to be able to add any
2 2 3
down only the functional unit operation to be limited to the type of functional unit (protection)
concerned functional unit concerned. The without powering down the
connections will have to be switchboard. This should be done
disconnected and reconnected in a location without equipment,
when it is replaced. within the limits stipulated by the
manufacturer.
disconnectable feeder
I would like this operation to I would like the maintenance I would like to be able to add any
3 3 3
shut down only the power to the operation to be limited to the type of functional unit (motor control
functional unit concerned, but allow functional unit concerned. It should or protection) without powering
the automated control system tests, be replaced without disturbing with down the switchboard.
which make it possible to test the the connections. This should be done in a location
installation in its entirety before without equipment, within the limits
putting it back into service, to be stipulated by the manufacturer.
performed. withdrawable drawer
14
Functional units Functional units overview
Compact NSX
fixed on mounting plate
Compact NSX
disconnectable
on Polyfast: SI=223
Compact NSX
withdrawable
in drawer SI=233
70-M half width drawer SI=333 70-M full width drawer SI=333
15
Functional units Electrical distribution
In > 630 A
Q1 Q2
0 0
0 1
1 0
Q1 Q2 Q3
0 0 0
1 0 0
0 1 0
0 0 1
Q1 Q2 Q3
0 0 0
1 0 0
0 0 1
1 1 0
0 1 0
16
Functional units Electrical distribution
In > 630 A
Coupling
bb Coupling in Okken has many possibilities, regarding the devices used and the
type of connection.
Masterpact NW40
Masterpact NW40b-63
230 cubicle
17
Functional units Electrical distribution
In > 630 A
230
3200 < In < 4000 100 1 NW40 4000
115-3
3 NW20-32 4000
115-2
1600 < In < 3200 100 3 NW08-16 3200
115-1
1 NW08-32 3200
Single NW
800 < In < 1600 100 4 NT08-16 2100
NS 800-1600 A
70-2 70-F
80 1 NT08-16 2100
NS 800-1600 A
Single NT/NS
18
Functional units Electrical distribution
In y 630 A
70-M
In < 63 iC60 1 4 modules half width
63 < In < 125 NG125 1 8 modules half or full width(1)
16< In < 100 NSX100 1 8 modules half or full width
70-2
Disconnectable Polyfast In < 400 NSX100-250 1 7 modules
SI = 223 400 < In < 630 NSX400-630 1 9 modules
70-2
Plug-in on Polyfast In < 400 NSX100-250 1 7 modules
SI = 233 400 < In < 630 NSX400-630 1 9 modules
70-2
Fixed In < 400 NSX100-250 2 8 modules
SI = 211 - 212 400 < In < 630 NSX400-630 1 10 modules
70-F
(1) depending on Iq
Selection of the functional unit - rated 690 V - 50/60 Hz - IP31/35C
Withdrawability In (A) Device Max. qty of Max. modularity Cubicle
devices (1 module = 25 mm)
Drawer In < 100 NS100L 1 8 modules
SI = 333 100 < In < 400 NS400L 1 12 modules
70 - M 70-2
19
Functional units Power factor compensation and
harmonic filtering
Selection
20
Functional units Power factor compensation and
harmonic filtering
b As is the case with the other products in the Okken range, the power factor
correction and filtering column has been designed to integrate perfectly with a full
switchboard, 2350 or 2200 mm high.
b The power factor correction and filtering elements can be protected as follows:
v externally, by an NS630 circuit breaker in an adjacent cubicle,
v internally, by an NS100 separate circuit breaker on each mounting plate.
b The choice affects the number of mounting plates per column.
Selection of cubicle
Rated Type Power Cubicles Qty of
voltage (Ue) (kVAR) qty height width mounting
(mm) (mm) plates
415 V without self up to 500 1 2200 650 4
1 2350 650 5
with integrated self up to 250 1 2200 650 4
1 2350 650 5
separated self up to 125 2 2200 650 4
2 2350 650 5
690 V without self up to 500 1 2200 650 4
1 2350 650 5
separated self up to 250 3 2200 650 4
3 2350 650 5
21
Functional units Motor control
> Given the complexity of data flows and > Based on architectures that have been pre-
communication network infrastructures, from tested and pre-validated for an integration in the
instrumentation to corporate management systems, leading communication protocols used in process
simple to integrate and scalable solutions are the industry and infrastructures, our solutions help
natural choice. you rapidly and efficiently optimise the energy
efficiency of your assets.
Example of an Ethernet
communication architecture of a
MotorSysTM iPMCC solution, at
a process unit level
Innovation
Bypass switch in a
Daisy Chain Loop
for an optimum
dependability
22
Functional units Motor control
We design with you the solution which meets your needs as well as
your process requirements.
Protection
Short-circuit, Thermal overload, Overcurrent, Ground current
Current phase imbalance & phase loss
Current phase reversal
Undercurrent
Long start (stall) & Jam (locked rotor)
Motor temperature sensor
Rapid cycle lockout
Load shedding
Voltage phase imbalance, phase loss, & phase reversal
Undervoltage & Overvoltage, Underpower & Overpower, Under & Over power factor
Measurements
Line currents, Ground current, Average current, Current phase imbalance, Thermal
capacity level
Motor temperature sensor
Frequency
Line-to-line voltage, Line voltage imbalance, Average voltage
Active & Reactive power, Power factor, Active & Reactive power consumption
Operational modes
Consignment
Starters test position
Maintenance & Upgrade live
Control at motor level
PC set-up
Remote management
Local HMI
"Nominal current only" set-up (screwdriver)
23
Functional units Motor control
bb Advantages
vv very economic solutions
vv suitable for all types of diagrams
vv manual reset following a thermal fault
vv type 2 coordination
bb Applications
vv manufacturing and continuous and semi-continuous processes.
bb Advantages
vv Wide choice of solutions.
vv Suitable for all types of diagrams.
vv Manual or automatic reset following a thermal fault.
vv 2 starting classes (10 and 20).
vv Type 2 coordination.
vv Segregation of thermal and magnetic faults.
24
Functional units Motor control
Selection of the functional unit -MotorSys iMCC 1 component - Ue = 415 V - 50 / 60 Hz - IP31 / 35C
70 - M
Selection of the functional unit -MotorSys MCC 2 components - rated 415 V - 50 / 60Hz - IP31 / 35C
Iq Circuit Power kW Cubicle
(A) breaker or 0.06 0.75 1.1 1.5 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30 37 45 55 75 90 110 132 160 200 220 250
fuses
4M half to 8M half
Direct On Line
50 GV2P
4M to 8M
GV3P full
100 GV2P 4M half to 8M half
8M half to
GV3P 8M full
100 GV2P 8M half to 8M full
70 - M
50 GV2P 8M full
Star Delta
25
Functional units Motor control
Selection of the functional unit -MotorSys MCC 3 components - rated 415 V - 50 / 60 Hz - IP31 / 35C
Iq Circuit Power kW Cubicle
(A) breaker or 0.06 0.75 1.1 1.5 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30 37 45 55 75 90 110 132 160 200 220 250
fuses
50 GV2L 4M half to 8M half
4M to 8M
GV3L full
8M half to 8M
70 NS80
full
100 GV2L 4M half to 8M half
20M
NSX400 full
20M to 24M
NSX630 full
Vario V2 + 4M half to 4M full
DF14
Vario V3 + 4M full
DF14
8M
GS2F full
GS2J 8M to 12M full
12M to
GS2L 16M full
GS2N 16M full
50 GV2L 8M full
26
Functional units
Selection of the functional unit - MotorSys iMCC 3 components - rated 415 V - 50 / 60 Hz - IP31 / 35C
Iq Circuit Power kW Cubicle
(A) breaker or 0.06 0.75 1.1 1.5 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30 37 45 55 75 90 110 132 160 200 220 250
fuses
50 GV2L 4M half to 4M full
8M half
GV3L to 8M full
70 NS80 8M full
12M to
Direct On Line
50 GV2 3M to 4M
GV3 4M
70 NS80 6M
100 NSX100 6M
NSX160 6M
NSX250 12M
NSX630 18M
GS2F 6M
GS2J 6M to 12M
GS2L 12M
GS2N 12M
GS2QQ 24M
27
Functional units Motor control
Selection of the functional unit - MotorSys iMCC 3 components - rated 415 V - 50 / 60 Hz - IP31 / 35C
Iq Circuit Power kW Cubicle
(A) breaker 0.06 0.75 1.1 1.5 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30 37 45 55 75 90 110 132 160 200 220 250
GV3L 8M full
NSX400 24 M
full
Reverse
24M
NSX630 full
50 GV2 6M
GV3 6M
70 NS80 6 M to 12M
NSX160 12M
NSX250 18M
70-2
NSX400 24M
NSX630 24M
50 GV2L 8M full
50 GV2 6M
GV3 12M
70 NS80 12M
NSX160 18M
NSX250 24M
70-2
NSX400 2x18M
NSX630 2x18M
28
Functional units Motor control
Motor control - MotorSys MCC and iMCC 1 & 3 components - rated 690 V - 50 Hz - IP31 / 35C
Iq Circuit Power kW Cubicle
(A) breaker 0.06 0.75 1.1 1.5 2.2 3 4 5.5 7.5 9 11 15 18.5 22 30 37 45 55 75 90 110 132 160 200 220 250
50 GV2L 4M to 8M full
GS2QQ 24 M full
50 TeSys U 3M
GV2 3M to 4M
75 NS100 12M
NS400 18M
GS2F 6M
GS2J 6M
70-2
GS2L 12M
GS2N 24M
GS2QQ 24M
50 GV2L 8M full
70 - M
50 TeSys U 3M
GV2 6M to 12M
70-2
70 - M
29
Functional units Variable speed drive and soft
starter
Altistart ATSU 01
Altistart ATS 48
bb The Altistart ATS 48 soft start - soft stop unit is a controller with 6 thyristors, which
is used for the torque-controlled soft starting and stopping of three-phase squirrel
cage asynchronous motors.
bb The Altistart ATS 48 must be selected on the basis of 3 main criteria:
vv the power supply voltage range (this catalogue deals only whith the devices
connected to a 415V or 690V network),
vv the power and the nominal current of the motor,
vv the type of application and the operating cycle.
Altistart ATS 48
ATV61 ATV71
ventilation, hoisting,
air conditioning, handling,
pumping, packing,
process machines,
lifts, ...
Altivar ATV 61 Altivar ATV 71 This catalogue deals only with 415V and 690V voltage.
30
Functional units Variable speed drive and soft
starter
31
Cubicles Cubicles available modularities
device
installation
zone
Cellule 230, 115, 70-2, 70-F et 185 Cellule 115/70-2
Cubicle 70-M:
Double vertical busbar
Cubicle height 2200 mm 2350 mm
No. of poles H-BB 3P 4P 3P 4P
top link V-BB 3P 3P 4P 3P 3P 4P
cover
Available modularity 64 modules 60 modules 56 modules 68 modules 68 modules 60 modules
Top link cover 4 modules 4 modules 2 modules 2 modules 6 modules
-
dimension (100 mm) (100 mm) (50 mm) (50 mm) (150 mm)
Bottom link cover 2 modules 2 modules 6 modules 2 modules 2 modules 6 modules
device dimension (50 mm) (50 mm) (150 mm) (50 mm) (50 mm) (150 mm)
installation
zone
bottom
No. of poles H-BB 3P 4P 3P 4P
link cover V-BB 3P 3P 4P 3P 3P 4P
Available modularity 64 modules 60 modules 60 modules 68 modules 68 modules 64 modules
Cellule70-M Top link cover - 4 modules 4 modules 2 modules 2 modules 6 modules
dimension (100 mm) (100 mm) (50 mm) (50 mm) (150 mm)
Bottom link cover 2 modules 2 modules 2 modules 2 modules 2 modules 2 modules
dimension (50 mm) (50 mm) (50 mm) (50 mm) (50 mm) (50 mm)
Note: 1 module = 25 mm.
32
Cubicles Cubicles available modularities
Type of connection
Okken has 5 types of connection:
bb rear connection and side connection, done in a specific compartment at the rear or
at the side of the device cubicle,
bb back to back connection, done in a specific compartment at the side of the front or
back cubicle,
bb top direct connection and bottom direct connection, directly done in the device
cubicle.
Connection 230 115 115/70 Single Single 70-2 70-F VSD(1) 185 PFC 70-M
NW NT/NS
Rear connection
Side connection
Back to back
Top direct
Bottom direct
33
Cubicles Presentation
Cubicle
The Okken switchboards consist of a framework and busbar assembly designed to
combine in the same cubicle functional units of varying technologies, grouping
both distribution and motor control applications.
Busbars
Busbar coating
Busbar coating none silver tin nickel epoxy
Horizontal busbar b b b b
Vertical busbar 115 b b b b
Vertical busbar 70 b b b
Vertical busbar 115 - 70 b b b
protection against ... corrosive corrosive internal
environment environment arc
Optimization
bb The busbar epoxy coating increase heating up to 10%.
bb To increase busbar ln in hot environments and with an IP 41 or 54, cubicle
ventilation is strongly recommended.
Horizontal busbar
Selection table
Allowable intensity (A) - IP31/35 C (kA eff.) Qty of bars
Bars section 40 x 10 mm
Single busbars
from 0 to 1900 50 2
from 1900 to 2500 80 3
from 2500 to 3200 100 4
from 3200 to 4000 100 6
Double busbars
from 4000 to 5000 100 2x3
from 5000 to 6300 100 2x4
from 6300 to 7300 150 2x6
34
Cubicles 230
Functional unit
Busbar for 230 cubicle
Type of connection
Type of distribution Type of connection Qty of cubicle
1 incomer or 1 distribution feeder bb direct connection from the bottom 1
bb rear connection
2 incomers + 1 coupling bb rear connection 3
The dimensions of the functional units, PCC > 630A, are in the choice pages, page 18.
direct connection
A: Additionnal= 800 mm
35
Cubicles 115
Functional unit
Vertical 115 busbar
bb high power,
115mm
115mm
115mm
bb designed for NW08-40, NT08-16/NS800-1600
devices,
bb full height busbar.
Type of connection
Type of distribution Circuit breaker Type of connection Qty of cubicle
1 incomer or Masterpact NW40 bb direct connection from the bottom 1
1 distribution feeder bb rear connection
Masterpact NW08-32 bb side connection from the front 1
bb direct connection from the top
bb direct connection from the bottom
bb rear connection
Masterpact NT08-16 bb side connection from the front 1
bb direct connection from the top
bb direct connection from the bottom
bb rear connection
2 incomers Masterpact NW40 bb direct connection from the bottom 2
+ 1 coupling bb rear connection 3
Masterpact NW08-32 bb direct connection from the top 2
bb direct connection from the bottom
bb rear connection
Masterpact NT08-16 bb direct connection from the top 2
bb direct connection from the bottom
bb rear connection
The dimensions of the functional units, PCC > 630A, are in the choice pages, page 18.
direct connection
L: long = 600 mm
36
Cubicles 115
Rear connection
T T T T
T
Masterpact NW20-32
T T
T
Masterpact NW/NT08-16
Compact NS800-1600
37
Cubicles 115
Side connection
T
T T T
Masterpact NW20-32
T
T T T
Masterpact NW/NT08-16
direct connection
38
Cubicles Single NW
Functional unit
Vertical 115 busbar
bb high power,
bb designed forNW08-32 devices,
bb height-reduced busbar.
Type of connection
Type of distribution Circuit breaker Type of connection Qty of cubicle
1 incomer or Masterpact NW40 bb direct connection from the bottom 1
1 distribution feeder bb rear connection
Masterpact NW08-32 bb side connection from the front 1
bb direct connection from the top
bb direct connection from the bottom
bb rear connection
Masterpact NT08-16 bb side connection from the front 1
bb direct connection from the top
bb direct connection from the bottom
bb rear connection
The dimensions of the functional units, PCC > 630A, are in the choice pages, page 18.
RC TDC BDC
column depth column depth column depth
1000/1200 mm 600 mm 600 mm
Masterpact NW08-32
M: medium = 400 mm
39
Cubicles 115/70-2
Functional unit
Vertical 115/70-2 busbar
bb Mixing high power incomers and feeders,
bb designed for NW08-32 devices and functional
units up to 630 A,
bb full height busbar.
The dimensions of the functional units, PCC y 630A, are in the choice pages, page 19.
40
Cubicles 115/70-2
Masterpact NW40
direct connection
L: long = 600 mm
Rear connection
column depth 1000/1200 mm column depth 1400 mm
T
Masterpact NW/NT08-16
Compact NS800-1600
direct connection
S: short= 250 mm
Side connection
T T
Masterpact NW20-32
direct connection
41
Cubicles Single NT/NS
Functional unit
Vertical 70 busbar
bb high power,
bb designed for NT08-16/NS800-1600 devices,
bb height-reduced busbar.
Type of connection
Type of distribution Type of connection Qty of cubicle
1 incomer or bb direct connection from the bottom 1
1 distribution feeder bb direct connection from the top
bb rear connection
The dimensions of the functional units, PCC > 630A, are in the choice pages, page 18.
RC TDC BDC
column depth column depth column depth
1000/1200 mm 600 mm 600 mm
Masterpact NT08-16/Compact NS800-1600
direct connection
M: medium = 400 mm
42 42
Cubicles 70-F
Functional unit
Vertical 70 busbar
bb designed for NT08-16/NS800-1600 and all the
distribution feeders,
bb full height busbar.
The dimensions of the functional units, PCC y 630A, are in the choice pages, page 19.
TDC BDC RC
column depth column depth column depth
600 mm 600 mm 600 / 1000 mm
Masterpact NT08-16
direct connection
650
Rear connections from the top or the bottom:
S: short = 250 mm
43
Cubicles 70-M
Functional unit
Vertical 70-M busbar
bb designed for 70-M drawers,
bb full height busbar.
Type of connection
Type of functional unit Type of connection
Drawer bb side connection from the front
bb rear connection
bb back to back
Rear connection
44
Cubicles
Side connection
45
Cubicles 70-2
Functional unit
70-2 cubicle is compliante with specific applications:
bb marine,
70 mm
70 mm
70 mm
bb seismic,
bb DEP Shell,
bb nuclear.
Vertical 70 busbar
bb designed for NT08-16/NS800-1600 and all the
distribution feeders and motor control feeders,
bb full height busbar.
Rear connection
column depth 1000 to 1200 mm column depth 1400 mm
Masterpact NT08-16 / Compact NS08-16
direct connection
46
Cubicles 70-2
Side connection
column width 650 + 450/650 mm column width 650 + 650 mm
Masterpact NT08-16 / Compact NS08-16
direct connection
47 47
Cubicles 185 (Jean Mller)
Functional unit
Vertical 185 busbar
bb designed for Jean Mller fuse-switches,
bb full height busbar.
Type of connection
Type of functional unit Type of connection
Drawer bb side connection from the front
bb rear connection
The dimensions of the MCC functional units are in the choice pages, page 25.
48
Notes
49
Example Example of configuration
1
Customers needs
1250 A
250 A
100 A
35 kW
5,5 kW
1,5 kW
35 kW
100 kW
150 kW
1,5 kW
1,5 kW
1,5 kW
1,5 kW
35 kW
15 kW
1,5 kW
1,5 kW
15 kW
45 kW
G 35 kW
100 kVAR
3200 A
3200 A
800 A
50
Example Example of configuration
2
Determine the functional units
according to the following parameters:
b In current,
b voltage,
b short-circuit current,
b number of pole
3
b type and technology of the functional units.
1250 A
250 A
100 A
35 kW
5,5 kW
1,5 kW
35 kW
100 kW
150 kW
1,5 kW
1,5 kW
1,5 kW
1,5 kW
35 kW
15 kW
1,5 kW
1,5 kW
15 kW
45 kW
35 kW
G
kVAR
3200 A
3200 A
800 A
EC 100 kV
Type of functional
VVD
VVD
VVD
INC
INC
INC
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
MC
ED
ED
ED
ED
ED
ED
ED
units
C
Technology
Polyfast
Polyfast
Polyfast
Polyfast
Polyfast
chassis
chassis
chassis
chassis
chassis
chassis
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
drawer
fixed
18
30
19
19
12
18
48
6
3
3
6
3
3
3
6
6
6
6
6
6
4
4
6
Cubicles,
115 / 70-2
1 cubicle
51
Installation Design your installation
Civil works
Ground fastening
compulsory fastening point
optional fastening point
Connection 230, 115, 115-70, 70-F, 70-2 and 185 cubicles 70-M cubicle
Rear connection
Side connection
Back to back
52
Installation Design your installation
Civil works
Side view
Top view
53
Okken performances Futher technical information
General data
Standard environment
reference standards IEC 61439-2
IEC 60529
climatic resistance damp heat withstand IEC 60068-2-30
dry heat withstand IEC 60068-2-2
low temperature withstand IEC 60068-21
salt spray withstand IEC 60068-2-11
installation indoor
earthquake withstand IEC68-3-3 and IRC60721-3-6
according to IBC 2000
CRT91
environment (CEM) type 2
Mechanical data
cable entry top/bottom
access front/rear
degree of protection (IP) 22/31/41/54
impact withstand index (IK) 10
form 2b/3b/4a/4b
withdrawability FFD/WFD/WFW/WWW
dimensions (mm) height 2200/2350
width 600 / 650 / 800 / 900
1000/1100/1150/1300
depth 600/1000/1200/1400
installation modularity in height 2200 mm 66 modules of 25 mm
a cubicle height 2350 mm 72 modules of 25 mm
average weight cubicle 115 (2500A) ~ 850 kg
cubicle 70-M ~ 400 kg
cubicle 70-2 PCC ~ 700 kg
cubicle 70-2 MCC ~ 600 kg
cubicle 230 (6300A) ~ 1300 kg
panel coating epoxy/polyester powder (SP03)
polymerised, > 50
framework galvanised
panelling colour RAL 9003
Electrical data
rated insulation voltage (Ui) 1000 V
rated operational voltage (Ue) 415 / 690 V CA
rated frequency (F) 50/60 Hz
rated impulse voltage (Uimp) 12 kV
rated auxiliary circuit voltage 230 V AC max.
overvoltage category IV
degree of pollution 3
rated current (In) 6300 A
horizontal busbar rating 7300 A
vertical busbar rating 4000 and 2000 A
horizontal busbar rated short-time current (Icw) 1s 50/80/100/150 kA rms
rated peak current 110/176/220/330 kA peak
vertical busbar rated short-time current (Icw) 1s 50/80/100 kA rms
rated peak current 110/176/220 kA peak
rated conditional short-circuit current (lsc) up to 150 kA
internal arcing protection according to IEC 61641 V2 100 kA eff 0.4 s
earthing diagram TT-IT-TNS-TNC
current limit of power incoming and outgoing feeders up to 6300 A
power limit of motor control feeders up to 250 kW 690 V
54
ART.960255 2013 - Schneider Electric - All rights reserved
Schneider Electric Industries SAS As standards, specifications and designs change from time to time, please ask for confirmation
35 rue Joseph Monier of the information given in this document.
CS 30323
F-92506 Rueil Malmaison Cedex
This document has been printed on ecological paper.
DESY014EN 02-2013