Professional Documents
Culture Documents
Gearbox 140430030256 Phpapp02 PDF
Gearbox 140430030256 Phpapp02 PDF
The most basic type of gear is a Wider gears and those that
spur gear, and it has straight-cut are cut for smoother
teeth, where the teeth are cut meshing are cut with the
parallel to the axis of the gear. teeth at an angle. These are
called helical gears.
Basic Principle
Double declutching
Used for smooth downshifting
Synchromesh Gearbox
Sliding sunchronizing units are provided to equalize the speeds of
gear and dog before meshing
The device works like a friction clutch
Equal speeds ensure smooth meshing
Normally not used in 1st and reverse gear
Working
Output shaft is always rotating (because it is positively connected to
the wheels)
Layshaft is connected to the engine, but it rotates freely when the
clutch is disengaged
Because the gears are meshed all the time, the synchro brings the
layshaft to the right speed for the dog gear to mesh.
The layshaft is now rotating at a different speed to the engine. Now,
the clutch gradually equalizes the speed of the engine and layshaft,
either bringing the engine to the same speed as the layshaft or vice
versa depending on engine torque and vehicle speed.
Synchromesh Gearbox
Synchromesh Gearbox
Gear Selector Mechanism
Gear Selector Rod
Gear Selector Rod
Advantages include:
Reduced drive train weight.
Improved traction.
Smoother ride.
Quieter operation.
Increased passenger compartment space.
Transaxle Gear Box
Sequential Gearbox