Professional Documents
Culture Documents
PFR-X/PFR-M
The power factor controllers of the PFR range calculate the active and nected steps. This makes general and specific monitoring of the capaci-
reactive power in the mains from the measured current and voltage. They tor bank and its operating conditions possible. In addition to that, PFR-M
also determine if power is being imported or exported. offers additional information such as detailed information on harmonics,
The controllers identify the output of the capacitor stages installed and THD, operating temperatures, kWh, kvarh. It also offers the option of ope-
connect or disconnect them in the optimum manner as required by the ac- ration in two different tariff modes, as well as an optional RS485 modbus,
tual mains conditions. The controllers consider the frequency of changes in and/or internal data logger.
the reactive load and follow the principle of rotational switching. The PFR power factor controller is ready for operation on preset default
The integrated digital display can show the actual power factor, the mains functions immediately after installation without any modifications or
frequency, the actual tariff, the programmed target power factor, the con- adjustments.
A
RS 485 Modbus
PFR B
(optional)
(PFR-M)
PFR-X PFR-M
Approval Marks