For XP VISTAWIN7 operating system CORELDRAW driving guide
1. Install CORELDRAW software.
2. Insert the driver 3. Click on "start" button to select Settings - printer, then double-click printer icon, add printer Click "next", Select local printer, click next (if this computer doesn't link LAN, it cant function ), Click the button "from floppy disk installation" In " copy files from the manufacturer " : G: \DRIVER\CorelDRAW DEVICE \ \ (Choose you need to install the operating system) In "the printer (P) :" GOLDCUT Click next to finish 4. Add GOLDCUT printer and set it as default , modify Paper manu parameter in Graphtec into GOLDCUT Choose Free size in Paper size Choose effective width *3000mm in Plot Area The driver installation is finished Note: 1 Before outputing file , please select images and use contours tools to thread the image, then use No filling tool from filling tool 2 Please open the print and output window and come to layout setting , place the image to the lower left . Then print and output Attention: After the plotter is reset antomatically and manually, it must self test , then it can work normally Then "Fill", choose "None".
Click " Print" and choose "GOLDCUT JK series" as your printer.