Selecting a Metering DESCRIPTION the proper antifoam pump. To suggest
When using silicone antifoams, a specific model, the manufacturer will Pump for Silicone optimal performance can, in many need to know several process parame- Antifoams circumstances, be obtained by ters, such as process flow rates, pres- continuously adding small amounts of sures, etc. Each manufacturer should the antifoam via a diaphragm-type be able to offer a pump that meets metering pump. your antifoaming needs. There are many manufacturers that For information about Dow Corning make metering equipment. Although Antifoams, call the Process Aids and in no way inclusive, the list below Additives Center at 1-800-FOAM-FREE serves as a starting point for locating (1-800-362-6373).
ELECTRIC METERING PUMPS
Bran and Lubbe Located in Buffalo Grove, IL (708) 520-0700 Complete meter/mix systems capability 316 stainless steel, food-grade pumps available Injection flow rates from 10 mL/hr to 22,000 gal/hr Pressure to 40,000 psi Antifoam viscosities to 20,000 cSt (and beyond with booster pump addition) Stranco Located in Bradley, IL (815) 939-1265 Complete meter/mix systems capability Utilize LMI Diaphragm Pumps (Acton, MA (617) 263-9800) Injection flow rates from 0.5 gal/hr to 20 gal/hr Pressure to 100 psi Antifoam viscosities to 20,000 cSt
PNEUMATIC METERING PUMPS
Williams Located in Valencia, CA (805) 257-2250 316 stainless steel, food-grade pumps available Injection flow rates from 2 mL/hr to 90 gal/hr Pressure to 10,000 psi Antifoam viscosities to 10,000 cSt Wilden Located in Colton, CA (714) 422-1700 Injection rate dependent on specific piping arrangement Antifoam viscosities beyond 100,000 cSt SAFE HANDLING INFORMATION determine its performance, efficacy PRODUCT SAFETY INFORMATION and safety. Suggestions of uses should REQUIRED FOR SAFE USE IS NOT not be taken as inducements to INCLUDED. BEFORE HANDLING, infringe any particular patent. READ PRODUCT AND MATERIAL Unless Dow Corning provides you with SAFETY DATA SHEETS AND CON- a specific written warranty of fitness TAINER LABELS FOR SAFE USE, for a particular use, Dow Cornings PHY SICAL AND HEALTH HAZARD sole warranty is that the product or INFORMATION. THE MATERIAL products, as supplied, will meet SAFETY DATA SHEET IS AVAILABLE Dow Cornings then current sales FROM YOUR DOW CORNING REP- specifications. DOW CORNING RESENTATIVE, OR DISTRIBUTOR, SPECIFICALLY DISCLAIMS ANY OR BY WRITING TO DOW CORNING OTHER EXPRESS OR IMPLIED CUSTOMER SERVICE, OR BY WARRANTY, INCLUDING THE CALLING (517) 496-6000. WARRANTIES OF MERCHANT- LIMITED WARRANTY ABILITY AND OF FITNESS FOR PLEASE READ CAREFULLY USE. Your exclusive remedy and Dow Corning believes that the Dow Cornings sole liability for breach information in this publication is an of warranty is limited to refund of the accurate description of the typical purchase price or replacement of any characteristics and/or uses of the product shown to be other than as product or products, but it is your warranted, and Dow Corning expressly responsibility to thoroughly test the disclaims any liability for incidental or product in your specific application to consequential damages.
Dow Corning is a registered trademark of
Dow Corning Corporation. 1997 Dow Corning Corporation. All rights reserved. Printed in USA AGP3575B Form No. 25-550-97