This document provides specifications for checking guide rails on a project. It specifies that the rails should be rectangular bars of a certain material and size. The distance between the rail axes should be within a certain theoretical tolerance, and each rail must be straight to within 2mm over a 2m length. It also specifies allowable differential levels between the two rails.
This document provides specifications for checking guide rails on a project. It specifies that the rails should be rectangular bars of a certain material and size. The distance between the rail axes should be within a certain theoretical tolerance, and each rail must be straight to within 2mm over a 2m length. It also specifies allowable differential levels between the two rails.
This document provides specifications for checking guide rails on a project. It specifies that the rails should be rectangular bars of a certain material and size. The distance between the rail axes should be within a certain theoretical tolerance, and each rail must be straight to within 2mm over a 2m length. It also specifies allowable differential levels between the two rails.