Professional Documents
Culture Documents
IBM Support
What's new?
The system-error LED on the system LED panel is lit when certain system errors occur. If the system-error LED on your BladeCenter
unit is lit, use the following table to help determine the cause of the error and the action you should take.
Over-temperature The system temperature has exceeded a 1. Check to see if a blower module has failed. If it has,
threshold level.
replace the blower module as soon as possible to regain
redundancy.
Information A noncritical event has occurred that Check the error log for the messages. Check the LEDs on the
should be looked at, such as the wrong BladeCenter unit and the blade servers to isolate the
switch module inserted in a bay, or power component.
needs that exceed the capacity of power
modules currently installed.
System error A critical system error has occurred, such 1. Check the error log for messages.
as non-redundancy on the power modules
or support
a system 2. Look for an error LED on the modules and blades to
IBM Support My errorDownloads
in a blade. Documents Tickets Communities Training Other
locate the component.
errors management module. the BladeCenter unit. If the problem remains, replace the
management module.
Management module After adding or restarting an Ethernet You must wait until the Ethernet switch module completes
Web interface to Ethernet switch module through the management- POST. After Ethernet switch module POST is complete, you
switch module does not module Web interface, the Web page does will be able to connect to the Ethernet switch module.
refresh not refresh. You will also be unable to
connect to the Ethernet switch module
through the Telnet interface.
Power module
Power module error A critical error has occurred in the power Replace the module. If your BladeCenter unit has a
module. redundant module for this power module, the BladeCenter
unit continues to function using the redundant module.
Blower module
Blower-module error The blower has failed or is operating too Replace the blower module as soon as possible to regain
Back to top
Support forums
Submit a technical question
Before you call IBM Service
https://www.ibm.com/support/home/docdisplay?lndocid=MIGR-53453 3/5
2/20/2018 Troubleshooting Light path diagnostics - IBM BladeCenter (8677) - IBM Support
Document information
Reference #: MIGR-53453
Site availability
Site assistance
https://www.ibm.com/support/home/docdisplay?lndocid=MIGR-53453 4/5
2/20/2018 Troubleshooting Light path diagnostics - IBM BladeCenter (8677) - IBM Support
https://www.ibm.com/support/home/docdisplay?lndocid=MIGR-53453 5/5