Professional Documents
Culture Documents
xls
Page 1
Work per unit length cut when operating at a safety factor of 5.
Note: In order to ensure a change of the point of drum crossover, where the wear and crushing is very severe the fo
Add 1/4 lap for counterbalanced groove drums
Add 1/2 lap for all other drum types.
s. (API RP9B)
Draw-works Drum diameter
22 ins 24 ins 26 ins 28 ins 30 ins 32 ins 34 ins 36 ins 38 ins
559 mm 610 mm 660 mm 711 mm 762 mm 813 mm 864 mm 914 mm 965 mm
10 9 9 8
12 12 11 10 9 9
14 12 11 11 10 9
13 12 11 11 10 9
15 14 13 12 11 10
and crushing is very severe the following should be added to the number of cut off laps as listed in the tabel above.
40 ins
1016 mm
he tabel above.