Professional Documents
Culture Documents
Release : LR13.W
Document nb : UMT/IRC/DD/025012
Document issue : 04.02/EN
Document status : Preliminary
Date : 18/04/2013
Passing on or copying of this document, use and communication of its contents not permitted
without Alcatel·Lucent written authorization
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is “write protected”; it may be
altered only by authorized persons. While copies may be printed, it is not recommended. Viewing of the master electronically
ensures acc
ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property of Alcatel-Lucent. Except as
expressly authorized in writing by Alcatel-Lucent, the holder shall keep all information contained herein confidential, shall disclose
the
UMT/IRC/DD/025012 v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
- Revision for Feature Activation Flags & Feature ID & Feature Name & external release version Info per parameter
- UA7 parameters update
02.02 UA7 03/12/2009 T. TELES (ONE)
- Inclusion of new SpreadSheet Configuration Management
- File Rename to UTRAN Parameters Description
- Update on Activation Flags; three new columns with comment between GM templates values and ONE values;
- UA7 parameters update
02.03 UA7 17/06/2010 T. TELES (ONE)
- Update the missing information for FirstOfdefinition, FirstOfautoRange, unit, Eng Domain, Source;
- Update Activation Flags for some features following the ONE File Review
- Update on Activation Flags for UA7.1 and UA7.1.2 features;
02.04 UA7 06/10/2010 T. TELES (ONE)
- UA7.1.2 parameters update including CR339596
- Update CR368055 with defenition for different Reserved parameters plus rrcRedirectOrigCellColourThreshold;
- UA7.1.2 Feature name update for 81213;
- Feature ID update for parameter hsdpaMaxThroughputXcem;
02.05 UA7 13/04/2011 T. TELES (ONE)
- Release updated for Feature 34393;
- Features Activation - ONE recommendation update for UA7.1.2 features under Activation_Flags Spreadsheet;
- Several upsated made for FeatureID and Feature Name
- Exctract from UA8 DB EDW1048P14_080811;
- New Eng Domain fields named Family, Subfamily1 and Subfamily2;
T. TELES & P.
03.01 UA8 15/07/2011 - Feature ID and Feature Name revision;
BLANK (ONE)
- Source_Default update for UA8 features - CR502335;
- UA8 feature inclusion on Activation_Flags Spreadsheet;
- Exctract from UA8 DB EDW1048P14_080811;
- New Eng Domain fields named Family, Subfamily1 and Subfamily2;
03.02 UA8 19/08/2011 T. TELES (ONE) - Feature ID and Feature Name revision;
- Source_Default update for UA8 features - CR502335;
- UA8 feature inclusion on Activation_Flags Spreadsheet;
- Update on Feature Release (some features cancelled/moved for Later Release);
03.03 UA8 27/11/2012 T. TELES (ONE)
- Review on recommendations for Activation_Flags Spreadsheet for UA8 features;
- Exctract from UA9 DB EDW1048P14_080811;
- New Source_Default, Family, Subfamily1 and Subfamily2 for LR13 parameters;
04.01 LR13.W 03/04/2013 T. TELES (ONE) - Feature ID and Feature Name revision for LR13;
- Activation_Flags Spreadsheet update for LR13;
- Configuration_Management Spreadsheet update for LR13;
- NEA Internal Review for Draft version;
04.02 LR13.W 18/04/2013 T. TELES (ONE) - Activation Flags completion for Template Default Setting and NEA Recommendations;
serviceI externalreleaseversio
param identity object name class domain objectpath Source_Default family subFamily1 subFamily2 FirstOfdefinition unit value_type min max step FirstOfdefault value feature Identity FirstOffFeature_name
mpact n
Number of AAA HW allowed per BTS to operate with basic functionality WB-AAA B01 A + 1.7/2.2 P - WCDMA Node B
aAABasicSwCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none system_restricted BTS Configuration N.A. Mixed 0 65534 1 0 134176 LR Future
Value 0 deactivates the feature configuration and functional support
This parameter configures the shape of the cell downlink (transmit) RF far-field
Differentiated UL/DL tilt for WB-AAA in W-
aAADownlinkBeamShape AaaFunction 3 BTS <BTSEquipment>-<BTSCell>-<AaaFunction> partial expert_tuning BTS Antenna profile to be provided by the Adaptive Antenna Array function of the RF unit N.A. Integer 1 5 1 1 134303 LR Future
CDMA
supporting the cell.
This parameter configures the tilt of the cell downlink (transmit) RF far-field profile
Differentiated UL/DL tilt for WB-AAA in W-
aAADownlinkBeamTilt AaaFunction 3 BTS <BTSEquipment>-<BTSCell>-<AaaFunction> partial expert_tuning BTS Antenna to be provided by the Adaptive Antenna Array function of the RF unit supporting deg Integer 0 21 1 0 134303 LR Future
CDMA
the cell. The value is in units of degrees down from the horizontal plane.
Number of cells per BTS whose UL and/or DL beam pattern (Tilt + beamshape) Differentiated UL/DL tilt for WB-AAA in W-
aAATiltSwCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none system_restricted BTS Antenna N.A. Mixed 0 65534 1 0 134303 LR Future
on the AAA HW can be configured. CDMA
This parameter configures the shape of the cell uplink (receive) RF far-field profile
Differentiated UL/DL tilt for WB-AAA in W-
aAAUplinkBeamShape AaaFunction 3 BTS <BTSEquipment>-<BTSCell>-<AaaFunction> partial expert_tuning BTS Antenna to be provided by the Adaptive Antenna Array function of the RF unit supporting N.A. Integer 1 5 1 1 134303 LR Future
CDMA
the cell.
This parameter configures the tilt of the cell uplink (receive) RF far-field profile to
be provided by the Adaptive Antenna Array function of the RF unit supporting the Differentiated UL/DL tilt for WB-AAA in W-
aAAUplinkBeamTilt AaaFunction 3 BTS <BTSEquipment>-<BTSCell>-<AaaFunction> partial expert_tuning BTS Antenna deg Integer 0 21 1 0 134303 LR Future
cell. The value is in units of degrees down from the horizontal plane. There is no CDMA
dep
The lowest possible value of min bit rate to be applied to any PS I/B RAB
mapped on HSDPA in Cell_DCH. The aim is to protect the call and to forbid to QoS diff evolution - Step 1 - OLS & MinBR
absoluteMinBrForHsdpa RbCongestionControl 3 RNC <RadioAccessService>-<RbCongestionControl> none expert_tuning Radio PS Call management QoS Differentiation Kbits/s Integer 1 100 16 127676 LR Future
decrease the rate below this minimum value, to avoid sending the call to integration
Cell_FACH or to avoid call drop
This parameter gives the absolute CE decoding rate limit requested by all E-DCH
absoluteRequestedDecodingRateLimitForCACECem BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Call Admission Control HSUPA radio links connected to a eCEM board. This is used for the CAC scheme for 2ms Kbits/s Integer 0 33500 10 28800 82602 E-DCH user and cell throughput increase UA8.1
TTI users for iBTS.
This parameter gives the absolute CE decoding rate limit requested by all E-DCH
absoluteRequestedDecodingRateLimitForCACXCem BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Call Admission Control HSUPA radio links connected to a xCEM board. This is used for the CAC scheme for 2ms Kbits/s Integer 0 33500 10 9600 82602 E-DCH user and cell throughput increase UA8.1
TTI users for iBTS.
This parameter defines the interval for the evaluation of access class barring in
relation to overload. The rate monitor metric is evaluated every
acbActivationTimer FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Call Admission Control CAC N.A. Integer 0 60 1 15 127550 Traffic Filtering in Cell Overload LR13.1
acbActivationTimer * 2 seconds to determine whether to trigger/deactivate
access class barring.
Reference to a list of instances of the EventFramework object applied for
acbEventFrameworkIdList FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Call Admission Control CAC N.A. ServiceLink <Null> 127550 Traffic Filtering in Cell Overload LR13.1
triggering ACB
Defines the threshold number of consecutive received TB with no CRC check
errors and with a QE lower or equal to acceleratedSirDownQeThreshold that is
<RadioAccessService>-<UlRbSetConf>-
acceleratedSirDownCountThreshold DynamicParameterPerDch 3 RNC none system_restricted Radio Power Management Power Control used to trigger the activation of the UL OLPC accelerated convergence N.A. Integer 0 1023 1023 34246 Power Control Enhancements UA6.0
<DynamicParameterPerDch>
functionality.
1023 is a special
Defines the threshold number of consecutive received TB with no CRC check
errors and with a QE lower or equal to acceleratedSirDownQeThreshold that is
<RadioAccessService>-<UlRbSetConf>-
acceleratedSirDownQeThreshold DynamicParameterPerDch 3 RNC none system_restricted Radio Power Management Power Control used to trigger the activation of the UL OLPC accelerated convergence N.A. Integer 0 255 255 34246 Power Control Enhancements UA6.0
<DynamicParameterPerDch>
functionality.
1023 is a special
Defines the additional down step size used to speed up UL OLPC convergence
<RadioAccessService>-<UlRbSetConf>- time. This is used when at least acceleratedSirDownCountThreshold consecutive
acceleratedSirDownStep DynamicParameterPerDch 3 RNC none system_restricted Radio Power Management Power Control dB Float 0 0,5 0,005 0 34246 Power Control Enhancements UA6.0
<DynamicParameterPerDch> TB have been received with no CRC check errors and with a QE lower or equal
to acceleratedSirDownQEThr
<RadioAccessService>-<Imcta>- intelligent Multi-Carrier Traffic Allocation
access Frequency 3 RNC none customer_setting Radio Mobility Configuration N.A. Enumerate N.A. 29415 UA5.0
<AlarmPriorityTableConfClass>-<Frequency> (iMCTA)
<RadioAccessService>-<Imcta>- intelligent Multi-Carrier Traffic Allocation
access Frequency 3 RNC none customer_setting Radio Mobility Configuration N.A. Enumerate N.A. 29415 UA5.0
<CacPriorityTableConfClass>-<Frequency> (iMCTA)
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
access Frequency 3 RNC <ServicePriorityGeneralTableConfClass>- none customer_setting Radio Mobility Configuration N.A. Enumerate N.A. 29415 UA5.0
(iMCTA)
<Frequency>
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
access Frequency 3 RNC <ServicePriorityTableForHsdpaConfClass>- none customer_setting Radio Mobility Configuration N.A. Enumerate N.A. 29415 UA5.0
(iMCTA)
<Frequency>
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
access Frequency 3 RNC <ServicePriorityTableForHsupaConfClass>- none customer_setting Radio Mobility Configuration N.A. Enumerate N.A. 29415 UA5.0
(iMCTA)
<Frequency>
<RadioAccessService>-
This parameter defines the duration for which network access will be restricted
accessBarringRestrictionInterval AccessRegulationProfile 3 RNC <RadioNetworkAccessRegulation>- none expert_tuning Radio Load Management Cell Barring min Integer 1 5 2 34191 RNAR support on RNC UA5.1
for a set of access classes.
<AccessRegulationProfile>
TS 25.304.
<RNC>-<CellProfiles>-
This list, referred to as Access Control, shall allow to prevent selected classes of
accessClassBarred CellAccessRestriction 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring N.A. Enumerate N.A. 13452 3G to 2G Cell Reselection UA2.0
users from sending initial access messages for load control reasons. But the uE
<CellAccessRestriction>
shall ignore Access Class related cell access restrictions when selecting a c
TS 25.304.
<RNC>-<CellProfiles>-
CellAccessRestrictionConnected This list, referred to as Access Control, shall allow to prevent selected classes of Enhancements for Call Setup in Cell FACH
accessClassBarred 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring N.A. Enumerate N.A. Q00852432 UA5.0
Mode users from sending initial access messages for load control reasons. But the uE mode
<CellAccessRestrictionConnectedMode>
shall ignore Access Class related cell access restrictions when selecting a c
<RadioAccessService>-
accessClassBarringActivation AccessRegulationProfile 3 RNC <RadioNetworkAccessRegulation>- none customer_setting Radio Load Management Cell Barring This parameter defines if the access class barring is activated or not. N.A. Boolean FAUX 34191 RNAR support on RNC UA5.1
<AccessRegulationProfile>
<RadioAccessService>-
This parameter defines the percentage of CS domain access classes to be
accessClassBarringCsPercentage AccessRegulationProfile 3 RNC <RadioNetworkAccessRegulation>- none expert_tuning Radio Load Management Cell Barring % Integer 0 100 10 0 34191 RNAR support on RNC UA5.1
barred. 1 class =10% while all 10 classes = 100%.
<AccessRegulationProfile>
<RadioAccessService>-
This parameter defines the percentage of PS domain access classes to be
accessClassBarringPsPercentage AccessRegulationProfile 3 RNC <RadioNetworkAccessRegulation>- none expert_tuning Radio Load Management Cell Barring % Integer 0 100 10 0 34191 RNAR support on RNC UA5.1
barred. 1 class =10% while all 10 classes = 100%.
<AccessRegulationProfile>
TS 25.304.
<RNC>-<CellProfiles>-
This list, referred to as Access Control, shall allow to prevent selected classes of
accessClassCsBarred CellAccessRestriction 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring N.A. Enumerate N.A. 13452 3G to 2G Cell Reselection UA2.0
users from sending initial access messages for load control reasons. But the uE
<CellAccessRestriction>
shall ignore Access Class related cell access restrictions when selecting a c
TS 25.304.
<RNC>-<CellProfiles>-
This list, referred to as Access Control, shall allow to prevent selected classes of
accessClassPsBarred CellAccessRestriction 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring N.A. Enumerate N.A. 13452 3G to 2G Cell Reselection UA2.0
users from sending initial access messages for load control reasons. But the uE
<CellAccessRestriction>
shall ignore Access Class related cell access restrictions when selecting a c
This parameter defines the duration that a group of classes remain barred. At the
<RadioAccessService>-<AutomatedCellBarring>- end of the timer, there will be a rotation of the classes to a new set of classes.
accessClassRestrictionInterval CoreNetworkOverload 3 RNC none system_restricted Radio Load Management Cell Barring s Integer 1 10000 300 31805 Automatic Cell Barring on Service Outage UA5.0
<CoreNetworkOverload> Used for algorithm mode 2.
The minimum value must be greater than timeCellBarring*(10/cel
This parameter defines the duration that a group of classes remain barred. At the
<RadioAccessService>-<AutomatedCellBarring>- end of the timer, there will be a rotation of the classes to a new set of classes.
accessClassRestrictionInterval ManualActivation 3 RNC none expert_tuning Radio Load Management Cell Barring s Integer 1 10000 300 31805 Automatic Cell Barring on Service Outage UA5.0
<ManualActivation> Used for algorithm mode 2
The minimum value must be greater than timeCellBarring*(10/ cel
This parameter defines the duration that a group of classes remain barred. At the
end of the timer, there will be a rotation of the classes to a new set of classes.
<RadioAccessService>-<AutomatedCellBarring>-
accessClassRestrictionInterval OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring Used for algorithm mode 2.
s Integer 1 10000 300 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion>
The minimum value must be greater than timeCellBarring*(10/
This parameter defines the 3GPP TS 25.331 Access Probability Factor. High
APF (means low Access Probability) applicable to Connected mode Ues. Used
accessProbabilityFactorHighConnectedUe MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS N.A. Integer 0 64 32 32 31868 MBMS Broadcast UA7.1
for UE counting.
This parameter is not used in this release.
This parameter defines the 3GPP TS 25.331 Access Probability Factor. High
APF (means low Access Probability) applicable to Idle mode Ues. Used for UE
accessProbabilityFactorHighRrcIdleUe MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS N.A. Integer 0 64 32 32 31868 MBMS Broadcast UA7.1
counting.
This parameter is not used in this release.
3GPP TS 25.331 Access Probability Factor. Low APF (means High Access
accessProbabilityFactorLowConnectedUe MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS Probability) applicable to Connected mode UEs. Used for UE counting. N.A. Integer 288 960 32 320 31868 MBMS Broadcast UA7.1
This parameter is not used in this release.
3GPP TS 25.331 Access Probability Factor. Low APF (means High Access
accessProbabilityFactorLowRrcIdleUe MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS Probability) applicable to Idle mode Ues. Used for UE counting. N.A. Integer 288 960 32 320 31868 MBMS Broadcast UA7.1
This parameter is not used in this release.
This parameter defines the 3GPP TS 25.331 Access Probability Factor. Medium
accessProbabilityFactorMediumConnectedUe MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS APF applicable to Connected mode Ues. Used for UE counting. N.A. Integer 96 256 32 160 31868 MBMS Broadcast UA7.1
This parameter is not used in this release.
This parameter defines the 3GPP TS 25.331 Access Probability Factor. Medium
accessProbabilityFactorMediumRrcIdleUe MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS APF applicable to Idle mode Ues. Used for UE counting. N.A. Integer 96 256 32 160 31868 MBMS Broadcast UA7.1
This parameter is not used in this release.
accuracyLevelDT[0]: This threshold is used to distinguish high accuracy
<RNC>-<LocationServices>- positioning requests from medium accuracy positioning requests for non-
accuracyLevelDT CommercialLocationServices 3 RNC none system_restricted Radio Location Services meter Integer 0 1806628 (50, 400) 25027 Advanced Location Services UA6.0
<CommercialLocationServices> emergency services with Response Time = Delay Tolerant. accuracyLevelDT[1]:
This threshold is used to distinguis
accuracyLevelDT[0]: This threshold is used to distinguish high accuracy
<RNC>-<LocationServices>- positioning requests from medium accuracy positioning requests for emergency
accuracyLevelDT EmergencyLocationService 3 RNC none system_restricted Radio Location Services meter Integer 0 1806628 (50, 400) 25027 Advanced Location Services UA6.0
<EmergencyLocationService> services with Response Time = Delay Tolerant. accuracyLevelDT[1]: This
threshold is used to distinguish me
accuracyLevelLD0]: This threshold is used to distinguish high accuracy positioning
<RNC>-<LocationServices>- requests from medium accuracy positioning requests for non-emergency services Enhancement of UTRAN positionning for 'Low
accuracyLevelLD CommercialLocationServices 3 RNC none system_restricted Radio Location Services meter Integer 0 1806628 1 (50, 400) 34406 UA7.1
<CommercialLocationServices> with Response Time = Low Delay. accuracyLevelLD[1]: This threshold is used to Delay' location requests
distinguish medi
accuracyLevelLD[0]: This threshold is used to distinguish high accuracy
<RNC>-<LocationServices>- positioning requests from medium accuracy positioning requests for emergency Enhancement of UTRAN positionning for 'Low
accuracyLevelLD EmergencyLocationService 3 RNC none system_restricted Radio Location Services meter Integer 0 1806628 1 (50, 400) 34406 UA7.1
<EmergencyLocationService> services with Response Time = Low delay. accuracyLevelLD[1]: This threshold is Delay' location requests
used to distinguish medium
This attribute specifies the delayed acknowledgement (SACK) timer interval for a
<BTSEquipment>-<IpRan>- SCTP association. This controls the maximum delay between the arrival of a
ackDelay SctpAssociationParams 3 BTS none system_restricted Transport IP SCTP ms Integer 50 500 1 200 27649 Native IP Iub support UA7.1
<SctpAssociationParams> DATA chunk and the transmission of a SCTP Selective Acknowledgement
(SACK) chunk.
This attribute specifies the delayed acknowledgement (SACK) timer interval for a
SCTP association. This controls the maximum delay between the arrival of a
ackDelay SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none system_restricted Transport IP SCTP ms Integer 50 500 1 N.A. 27649 Native IP Iub support UA7.1
DATA chunk and the transmission of a SCTP Selective Acknowledgement
(SACK) chunk.
Indicates the percentage of number of positive and negative acknowledgements
ackNackRatio OcnsHsdpa 2 RNC <RNC>-<NodeB>-<FDDCell>-<OcnsHsdpa> partial expert_tuning Radio Power Management OCNS % Integer 0 100 100 34195 Support OCNS with HSDPA UA6.0
as input to the NodeB scheduler.
it specifies ACK-NACK Repetition Factor for common E-DCH HS-DPCCH
<RadioAccessService>-<DedicatedConf>- operation (ACK/CQI feedback).
ackNackRepetitionFactor CommonEdchHsdpcchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH NBAP & SIB5 N.A. Integer 1 4 1 1 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchHsdpcchInfo>
This parameter indicates the number of consecutive repetitions of the ACK and
ackNackRepetitionFactor HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none expert_tuning Radio HSDPA Scheduler N.A. Integer 1 4 1 27932 HSDPA Step1 UA4.2
NACK
External Document Page 3 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This parameter indicates Power offset used in the UL between the HS-DPCCH
ackPowerOffset HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none customer_tuning Radio HSDPA Power Control N.A. Integer 0 8 6 27932 HSDPA Step1 UA4.2
slot carrying HARQ ACK information and the associated DPCCH.
This parameter indicates the power offset used in the UL between the HS-
ackPowerOffsetOneLeg HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none customer_tuning Radio HSUPA Power Control DPCCH slots carrying HARQ ACK information and the associated DPCCH in case N.A. Integer 0 8 14 82602 E-DCH user and cell throughput increase UA8.1
the adaptive feature is enabled and only one radio leg is in the DCH active set.
This parameter provides global activation/deactivation for all OLS features (iRM, QoS differentiation based on TC, ARP and
activateOls RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call management QoS Differentiation N.A. Boolean VRAI 25080 UA5.0
AO) THP
3G to 2G Handover with GSM measurements
activationHoGsmCsAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility [HHO][3G2G] this parameter indicates if the handover CS toward GSM is allowed. N.A. Boolean FAUX 13447 UA2.0
(With and without Compressed Mode)
This parameter defines the algorithm that is used for automated cell barring. 1 is
<RadioAccessService>-<AutomatedCellBarring>- for activating cell barring on all classes defined in the xrangeAccessClasses, 2 is
algorithmMode OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring N.A. Enumerate mode2 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion> for a sequential barring of the classes in the xrangeAccessClasses.
Default is the algo
This parameter defines the congestion level for algorithm mode 1. This mode
<RadioAccessService>-<AutomatedCellBarring>- applies barring to all classes in the xrangeAccessClasses. When the RNC
algorithmMode1CongestionLevel OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring N.A. Integer 1 5 4 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion> overload threshold reaches the defined level 1=minor, 2=major, 3=critical,
4=critical1, 5=critical2, the mo
This parameter defines the congestion level for algorithm mode 2. This mode
<RadioAccessService>-<AutomatedCellBarring>- applies barring to all classes in the xrangeAccessClasses. When the RNC
algorithmMode2CongestionLevel OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring N.A. Integer 1 5 2 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion> overload threshold reaches the defined level
1 = minor overload, 2 = major overload, 3 = critical overload
if algorithm mode2 and DSAC is enabled then this gives the percentage of AC
<RadioAccessService>-<AutomatedCellBarring>- Manual Overload control at NodeB granularity
algorithmMode2CsPercentage CoreNetworkOverload 3 RNC none expert_tuning Radio Call Admission Control ACB that are to be barred for CS at the beginning of the first AC barring interval in % Integer 0 100 10 20 98448 LR13.1
<CoreNetworkOverload> (Class barring enhancement)
Core Network overload situation
This parameter defines the percentage of domain access classes to be barred
<RadioAccessService>-<AutomatedCellBarring>-
algorithmMode2CsPercentage ManualActivation 3 RNC none expert_tuning Radio Load Management Cell Barring when manual automated cell barring is activated. 1=10% while 10 = 100%.
% Integer 0 100 10 N.A. 31805 Automatic Cell Barring on Service Outage UA5.0
<ManualActivation>
Note: This parameter is used for both domains CS and PS.
if algorithm mode2 and DSAC is enabled then this gives the percentage of AC
<RadioAccessService>-<AutomatedCellBarring>- Manual Overload control at NodeB granularity
algorithmMode2CsPercentage OverloadCongestion 3 RNC none customer_setting Radio Call Admission Control ACB that are to be barred for CS at the beginning of the first AC barring interval in % Integer 0 100 10 20 98448 LR13.1
<OverloadCongestion> (Class barring enhancement)
RNC/TMU overload situation
if algorithm mode2 and DSAC is enabled then this gives the percentage of AC
<RadioAccessService>-<AutomatedCellBarring>- Manual Overload control at NodeB granularity
algorithmMode2PsPercentage CoreNetworkOverload 3 RNC none expert_tuning Radio Call Admission Control ACB that are to be barred for PS at the beginning of the first AC barring interval in % Integer 0 100 10 20 98448 LR13.1
<CoreNetworkOverload> (Class barring enhancement)
Core Network overload situation
<RadioAccessService>-<AutomatedCellBarring>-
algorithmMode2PsPercentage ManualActivation 3 RNC none expert_tuning Radio Load Management Cell Barring This parameter is unused, see attribute "algorithmMode2CsPercentage". % Integer 0 100 10 0 31805 Automatic Cell Barring on Service Outage UA5.0
<ManualActivation>
if algorithm mode2 and DSAC is enabled then this gives the percentage of AC
<RadioAccessService>-<AutomatedCellBarring>- Manual Overload control at NodeB granularity
algorithmMode2PsPercentage OverloadCongestion 3 RNC none customer_setting Radio Call Admission Control ACB that are to be barred for PS at the beginning of the first AC barring interval in % Integer 0 100 10 20 98448 LR13.1
<OverloadCongestion> (Class barring enhancement)
RNC/TMU overload situation
This parameter is used to activate or deactivate the general barring
functionality.
allowed AutomatedCellBarring 3 RNC <RadioAccessService>-<AutomatedCellBarring> none customer_setting Radio Load Management Cell Barring Deactivation during an overload condition will require time for existing barring to N.A. Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
be removed from
the cells.
<RadioAccessService>-<AutomatedCellBarring>-
allowed CoreNetworkOverload 3 RNC none customer_setting Radio Load Management Cell Barring This parameter allows activation of barring for core overload N.A. Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
<CoreNetworkOverload>
<RadioAccessService>-<UserServiceProfiles>- Parameter Class Evolution in UA08 & UTRAN
allowed EdchCombination 3 RNC none customer_setting Radio Channels & Bearers Configuration This parameter indicates if the combination is allowed related to DlUserService N.A. Boolean N.A. 80685 UA8.1
<EdchUserServiceProfile>-<EdchCombination> model simplification
<RadioAccessService>-<UserServiceProfiles>- Parameter Class Evolution in UA08 & UTRAN
allowed HsdpaCombination 3 RNC none customer_setting Radio Channels & Bearers Configuration This parameter indicates if the combination is allowed related to DlUserService N.A. Boolean N.A. 80685 UA8.1
External Document <HsdpaUserServiceProfile>-<HsdpaCombination> Page 4 model simplification Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This parameter defines whether a failure of the core network can cause the
<RadioAccessService>-<AutomatedCellBarring>- automated cell barring to bar all the classes on the cells.
allowed IuFailure 3 RNC none customer_setting Radio Load Management Cell Barring N.A. Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
<IuFailure> If the feature is active, then it required the failure of the iuCS and iuPS networks
or manual trigger.
This parameter is used to activate or deactivate the functionality that triggers on
congestion situations.
<RadioAccessService>-<AutomatedCellBarring>-
allowed OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring Deactivation during an overload condition will require time for existing barring to N.A. Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion>
be removed from
the cells.
This parameter is used to activate or deactivate the silent Iu Detection.
allowed SilentIuDetection 3 RNC <RadioAccessService>-<SilentIuDetection> none system_restricted Radio Protocols Silent Iu The feature works at discrete intervals of 15 minutes to coincide with counter N.A. Boolean FAUX 80029 Silent Iu Detection UA5.0
collection intervals.
This parameter is no more significant from UA04.1: the Resizing algorithm is
allowedDlRbSetForMatching DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio PS Call management N.A. Integer 0 64 N.A. 13475 RAB Matching Algorithm UA2.0
suppressed and replaced by the Fallback algorithm, more generic
allowedIuUpVersion CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none customer_setting Radio Speech Call Management AMR Allows to restrict use of Iu UP versions N.A. Enumerate V2OrV1 30229 Iu UP FP v2.0 UA5.0
allowedSlotFormat RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none system_restricted Radio Power Management RACH Defines the number of Rach Slot Format N.A. Enumerate avsf32 28016 3GPP compliant NBAP (multi-vendor) UA5.0
This parameter is no more significant from UA04.1: the Resizing algorithm is
allowedUlRbSetForMatching UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio PS Call management N.A. Integer 0 66 N.A. 13475 RAB Matching Algorithm UA2.0
suppressed and replaced by the Fallback algorithm, more generic
Alcatel Lucent Proprietary RLC SDU discarding mechanism. Only applicable to
<RadioAccessService>-<RlcConfClass>- RLC SDUs that has not been transmitted. the flag isAluTimerBasedSduDiscard
aluTimerBasedSduDiscard DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols RLC ms Enumerate 2000 81204 Dual Cell HSDPA operation UA7.1.2
<DlRlcAckFlexibleMode> set to False would disable the functionality. the range would be between 2-15 sec
with granularity of
Alcatel Lucent Proprietary RLC SDU discarding mechanism. Only applicable to
<RadioAccessService>-<RlcConfClass>- RLC SDUs that has not been transmitted. the flag isAluTimerBasedSduDiscard
aluTimerBasedSduDiscard DlRlcAckMode 3 RNC none expert_tuning Radio Protocols RLC ms Enumerate 2000 81204 Dual Cell HSDPA operation UA7.1.2
<DlRlcAckMode> set to False would disable the functionality. the range would be between 2-15 sec
with granularity of
Identity of the DL Radio Bearer set used in the Always-On configuration in
alwaysOnDlMultipleRbSetFachId AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none customer_setting Radio PS Call management Always-on N.A. ServiceLink N.A. 33565 UA06 Always-On developments UA6.0
CELL_FACH for (PS I/B + PS I/B) RABs combination
alwaysOnDlRbSetDchId AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none system_restricted Radio PS Call management Always-on Identity of the Dl radio bearer set used in the Always On configuration in DCH N.A. ServiceLink N.A. 13475 RAB Matching Algorithm UA2.0
alwaysOnDlRbSetFachId AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none system_restricted Radio PS Call management Always-on Identity of the Dl radio bearer set used in the Always On configuration in FACH N.A. ServiceLink N.A. 13475 RAB Matching Algorithm UA2.0
Identity of the UL Radio Bearer set used in the Always-On configuration in
alwaysOnUlMultipleRbSetFachId AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none customer_setting Radio PS Call management Always-on N.A. ServiceLink N.A. 33565 UA06 Always-On developments UA6.0
CELL_FACH for (PS I/B + PS I/B) RABs combination
alwaysOnUlRbSetDchId AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none system_restricted Radio PS Call management Always-on Identity of the Ul radio bearer set used in the Always On configuration in DCH N.A. ServiceLink N.A. 13475 RAB Matching Algorithm UA2.0
alwaysOnUlRbSetFachId AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none system_restricted Radio PS Call management Always-on Identity of the Ul radio bearer set used in the Always On configuration in FACH N.A. ServiceLink N.A. 13475 RAB Matching Algorithm UA2.0
<RadioAccessService>-<DedicatedConf>-
FullEventRepCritEvent1AWithoutI <MeasurementConfClass>-
amountRep 3 RNC none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] ms Enumerate Infinity 33814 Intra-Frequency Inter-RNC HHO without Iur UA6.0
ur <FullEventRepCritHhoMgt>-
<FullEventRepCritEvent1AWithoutIur>
<RadioAccessService>-<DedicatedConf>- Amount of periodical reporting when an Event1A triggers such a reporting in Full
<MeasurementConfClass>- Event Mode.For Calls : the new value of the parameter has to be taken into
amountRep1A FullEventRepCritShoMgtEvent1A 3 RNC none system_restricted Radio Mobility [SHO] N.A. Enumerate Infinity 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- account in the life of a call, at the next RRC Measurement Control to configure or
<FullEventRepCritShoMgtEvent1A> reconfigure the
<RadioAccessService>-<DedicatedConf>- Amount of periodical reporting when an Event1B triggers such a reporting in Full
<MeasurementConfClass>- Event Mode. The new value of the parameter has to be taken into account in the
amountRep1B FullEventRepCritShoMgtEvent1B 3 RNC none system_restricted Radio Mobility [SHO] N.A. Enumerate Infinity 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- life of a call, at the next RRC Measurement Control to configure or reconfigure
<FullEventRepCritShoMgtEvent1B> the Event (e.g
<RadioAccessService>-<DedicatedConf>- Amount of periodical reporting when an Event1C triggers such a reporting in Full
<MeasurementConfClass>- Event Mode.The new value of the parameter has to be taken into account in the
amountRep1C FullEventRepCritShoMgtEvent1C 3 RNC none system_restricted Radio Mobility [SHO] N.A. Enumerate Infinity 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- life of a call, at the next RRC Measurement Control to configure or reconfigure
<FullEventRepCritShoMgtEvent1C> the Event (e.g.
<RadioAccessService>-<DedicatedConf>-
<MeasurementConfClass>- Amount of periodical reporting when an Event1J triggers such a reporting in Event
amountRep1J FullEventRepCritShoMgtEvent1J 3 RNC none system_restricted Radio Mobility [SHO] N.A. Enumerate Infinity 32076 E-DCH Macro Diversity Support UA6.0
<FullEventRepCritShoMgt>- Mode
<FullEventRepCritShoMgtEvent1J>
<RadioAccessService>-<DlCodeIrmTable>- Specifies the spreading factor to be used for AMR5.9 monorate operation
amr5p9MonoRateConfig IrmAmrConfPerOls 3 RNC none expert_tuning Radio Speech Call Management AMR N.A. Enumerate N.A. 34216 High speech capacity with AMR monorate UA6.0
<IrmAmrConfList>-<IrmAmrConfPerOls> dependent on the DL code load color and the user AR priority level.
<RadioAccessService>-<DlCodeIrmTable>- List of AMR Conf used at AMR RB selection algorithm processing. The two
amrRateConfig IrmAmrConfPerOls 3 RNC none expert_tuning Radio Speech Call Management AMR N.A. Enumerate N.A. 27804 AMR RAB selection at admission (load) UA6.0
<IrmAmrConfList>-<IrmAmrConfPerOls> arguments of the list are “DL code load color” and “user priority”.
This parameter associates this MC-TRX with an ANTENNA ACCESS object.
antennaAccessId MCTRX 0 BTS <BTSEquipment>-<MCTRX> critical customer_setting BTS Antenna When the parameter is not present, the BTS uses the instance of object MCTRX N.A. ServiceLink N.A. 80499 3G Support of MC-TRX 900MHz UA8.1
as antennaAccessId
This parameter associates this RemoteRadioHead with an AntennaAccess object
When the parameter is not present, the BTS uses the instance of object
antennaAccessId RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> critical customer_setting BTS Antenna RemoteRadioHead as antennaAccessId N.A. ServiceLink N.A. 33519 Daisy-chain operation for RRH solutions UA8.1
To a cell C
a. curren
Common average window size to be used in both E-DCH and HS-DSCH traffic
<RadioAccessService>-<DedicatedConf>-
averageWindow HspaTrafficActivityDetectionConf 3 RNC none customer_tuning Radio HSUPA Scheduler detection, for both inactivity/activity detection trigger. Also used for throughput ms Integer 100 1000 10 300 82602 E-DCH user and cell throughput increase UA8.1
<HspaTrafficActivityDetectionConf>
calculation in sub-feature R1 of feature 82602.
Angle between the center of the horizontal antenna beam width and the true
azimuthAntennaAngle FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Design deg Integer 0 360 N.A. 21295 Enhanced Cell Coverage Location Report UA3.0
north, counting clockwise.
<RadioAccessService>-<DlRbSetConf>- Time period over which the RNC calculates an average RNC buffering delay
backoffPeriod IuCsTimingAlignment 3 RNC none system_restricted Radio Synchronisation Iu-CS Timing Alignment ms Integer 0 65535 N.A. 22788 Iu-CS Timing Alignment UA3.1
<IuCsTimingAlignment> experienced by thr Iu DL frames
This parameter describes the UL bandwidth to be respected by shaping in the T3 backhaul for 9316 MS Node B and 9326
bandwidth BandwidthPool 0 BTS <BTSEquipment>-<BandwidthPool> none customer_init Transport Ethernet Kbits/s Integer 0 44736 N.A. 93278 LR Future
iBts (in kbits per second) d2U
TS 25.331 Cell barred
<RNC>-<CellProfiles>-
When cell status "barred" is indicated , the UE is not permit to select/reselect this
barredOrNot CellAccessRestriction 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring N.A. Enumerate notBarred 13452 3G to 2G Cell Reselection UA2.0
cell, not even for emergency calls. For a status "not barred", the UE may
<CellAccessRestriction>
select/reselect this cell during the cell selection and reselection proc
<RNC>-<NodeB>-<FDDCell>-
Scheme1Cdma1xCellSelectionInf
bOffUnit 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] Default search interval while on CDMA (coming back from UMTS failure) s Enumerate 60 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme1Cdma1xCellSelectionInfo>
<RadioAccessService>-<DedicatedConf>- This parameter defines a period in which the first DL buffer occupancy
boHoldoffTimeInitialDlFachDch MeasurementConfClass 3 RNC none customer_tuning Radio PS Call Management RB Rate Adaptation - Buffer ms Integer 0 16000 20 500 34227 State transitioning developments UA6.0
<MeasurementConfClass> measurement is ignored following a Cell_FACH to Cell_DCH transition
<RadioAccessService>-<DlRbSetConf>- Indicates the period of time during which it is forbidden to send any new
boPendingTriggerTimeDlDch DchDlBoTrafVolMeas 3 RNC <DlRbRaTrafficMonitoring>- none customer_tuning Radio PS Call Management RB Rate Adaptation - Buffer measurement reports with the same Traffic volume event identity even if the ms Integer 0 16000 20 2000 34227 State transitioning developments UA6.0
<DchDlBoTrafVolMeas> triggering condition is fulfilled.
<RadioAccessService>-<DlRbSetConf>-
The threshold of the downlink buffer occupancy in CELL DCH to trigger a data
boThresholdDlDch DchDlBoTrafVolMeas 3 RNC <DlRbRaTrafficMonitoring>- none customer_tuning Radio PS Call Management RB Rate Adaptation - Buffer bytes Integer 0 65535 1400 34227 State transitioning developments UA6.0
rate increase. A value of zero disables the measurement.
<DchDlBoTrafVolMeas>
<RadioAccessService>-<DlRbSetConf>- The period of time between the timing of event detection and the timing of
boTimeToTriggerDlDch DchDlBoTrafVolMeas 3 RNC <DlRbRaTrafficMonitoring>- none customer_tuning Radio PS Call Management RB Rate Adaptation - Buffer triggering the downlink buffer occupancy measurement event. Modification of this ms Integer 0 10000 20 0 34227 State transitioning developments UA6.0
<DchDlBoTrafVolMeas> parameter will not impact service
btsLoginBannerText BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Design N.A. String 0 2048 N.A. 33278 Node B Security UA06 Development UA6.0
This parameter defines the SCTP port number that the BTS needs to pass in the
<BTSEquipment>-<IpRan>-
btsSctpPortNumber SctpAssociationParams 0 BTS critical customer_setting Transport IP proprietary ATTACH message to RNC. Node B waits on this port number for N.A. Integer 1 65535 1 2905 27649 Native IP Iub support UA7.1
<SctpAssociationParams>
SCTP INIT message from RNCThis parameter applies only for Native IP Iub.
<RadioAccessService>-
Bucket buffer time expressed in 10ms unit. Bucket Size =MBR(bounded by
bucketBufferTime DlSourceConformanceInformation 3 RNC <SourceConformanceConf>- none expert_tuning Radio HSDPA Source Conformance ms Integer 10 30000 10 3750 29840 Commercial Hsupa introduction UA5.0
TokenGenerationRate) * Bucket Buffer Time.
<DlSourceConformanceInformation>
MbmsDlSourceConformanceInfor This parameter defines the Bucket buffer time expressed in 10ms unit. Bucket
bucketBufferTime 3 RNC none system_restricted Radio Broadcast Services MBMS ms Integer 10 30000 10 3750 31868 MBMS Broadcast UA7.1
mation Size =MBR(bounded by TokenGenerationRate) * Bucket Buffer Time.
<RadioAccessService>- Bucket Buffer Time .
bucketBufferTime UlSourceConformanceInformation 3 RNC <SourceConformanceConf>- none expert_tuning Radio HSUPA Source conformance Bucket Size =MBR(upper bounded by MaximumTokenGenerationRate) * ms Integer 10 30000 10 500 29840 Commercial Hsupa introduction UA5.0
<UlSourceConformanceInformation> BucketBuffer Time
<RadioAccessService>-<DedicatedConf>- Guard timer required to prevent TTI reconfiguration ping pong for uplink traffic
burstyTraffic2msTtiReconfigurationStabiliserTimer EdchTrafficActivitySmartphone 3 RNC <HspaTrafficActivityDetectionConf>- none expert_tuning Radio HSUPA Congestion Control sub feature. ms Integer 0 60000 100 3000 120363 Smart phone EDCH resource usage. LR13.1
<EdchTrafficActivitySmartphone> Meaningful only if uplinkThresholdSmartEdchResourceusageActivation is True
cacConfClassId NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Call Admission Control CAC Call Admission Control conf class identifier N.A. ServiceLink N.A. 13450 Inter frequency Hard HO UA5.0
cacConfId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Call Admission Control CAC Call Admission Control conf class identifier N.A. ServiceLink N.A. 0 none UA1
This parameter is a pointer to one of the fifteen RNC iMCTA CAC priority table
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- intelligent Multi-Carrier Traffic Allocation
cacPriorityTableConfClassId 3 RNC none customer_setting Radio Mobility [HHO][iMCTA] instances which gives the priority for the 2G and UMTS access whatever the N.A. ServiceLink N.A. 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> (iMCTA)
mobile type
<RNC>-<NeighbouringRNC>- This parameter is a pointer to one of the fifteen RNC iMCTA CAC priority table
NeighbouringRNCIntelligentMultiC intelligent Multi-Carrier Traffic Allocation
cacPriorityTableConfClassId 3 RNC <NeighbouringRNCIntelligentMultiCarrierTrafficAllo none customer_setting Radio Mobility [HHO][iMCTA] instances which gives the priority for the 2G and UMTS access whatever the N.A. ServiceLink N.A. 29415 UA5.0
arrierTrafficAllocation (iMCTA)
cation> mobile type
intelligent Multi-Carrier Traffic Allocation
cacPriorityTableConfClassId RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio Mobility [HHO][iMCTA] Identifier of the cacPriorityTableConfClass N.A. ServiceLink N.A. 29415 UA5.0
(iMCTA)
When CACtransportInfoList has more than one instance then the characteristic
<RadioAccessService>-<DlRbSetConf>- indicates what the instance applies to. Most of the time only one instance used
cacTransportInfoInstanceCharacteristic CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 N.A. Enumerate UNSPECIFIED 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> with value UNSPECIFIED. Several instances to be used for AMR, to differentiate
based on THP, to di
When CACtransportInfoList has more than one instance then the characteristic
<RadioAccessService>-<UlRbSetConf>- indicates what the instance applies to. Most of the time only one instance used
cacTransportInfoInstanceCharacteristic CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 N.A. Enumerate UNSPECIFIED 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> with value UNSPECIFIED. Several instances to be used for AMR, to differentiate
based on THP, to di
It allows to define CallAdmissionPower= callAdmissionRatio* Ptraffic, where
Ptraffic= MaxTxPower- common channels power.
<RadioAccessService>-<DedicatedConf>-
callAdmissionRatio PowerPartConfClass 3 RNC none customer_tuning Radio Call Admission Control DL Power It is defined in order to allow additional legs in soft handover and new calls in % Integer 0 100 85 0 none UA1
<PowerPartConfClass>
some conditions.
Indeed, for a power used for tra
This parameter is used to define minimum number of calls that must be attempted
before the next step of the silent IU feature is checked.
callAttemptThreshold SilentIuDetection 3 RNC <RadioAccessService>-<SilentIuDetection> none system_restricted Radio Protocols Silent Iu N.A. Integer 0 16383 500 80029 Silent Iu Detection UA5.0
Once the number of calls attempted has exceed this threshold, then the success
ratio is tested.
This configurable parameter allows the operator to provision the threshold for
<RadioAccessService>- evolution of the call drop rates between subsequent iterations (N-2, N-1) of the UTRAN Self Optimisation (CPICH auto
callDropRateEvolThreshold PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] % Integer 0 100 1 20 123989 LR Future
<PcpichPowerAutoAdjConfClass> 100508/123989 UTRAN Self Optimisation (cell overload) feature, above which the adjustment)
call drop rate o
If CallPCommissioningMode is set to commissioningCallPMode then this
parameter indicates the CEM board number on which the test should start.
callPCEMSlotNumber BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Design N.A. Integer 0 12 1 14869 Remote I&C parameters modifications UA2.0
If CallPModeCommissioningMode is set to nominalMode then this parameter is
not significant and should be ignore
Represents the mode of resource allocation run by CallP. Possible values :
callPCommissionMode BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Design nominalCallP, commissioningCallP.
N.A. Enumerate nominalCallPMode 15879 I&C3 - Node B Commissioning callp UA2.1
It applies to the CallPCEMNumber, this number should be set first.
<RadioAccessService>-<IrmPreemption>- [iRM Preemption
callsSupervision01 IrmPreemptionExtendedParams 3 RNC none system_restricted Radio Load Management Optimization parameters for the IRM preemption feature. Applicable only to V4. N.A. Integer 0 2147483647 2147483647 25075 iRM Pre-emption UA4.1
<IrmPreemptionExtendedParams> UA4][Others]
<RadioAccessService>-<IrmPreemption>- [iRM Preemption
callsSupervision02 IrmPreemptionExtendedParams 3 RNC none system_restricted Radio Load Management N.A. Integer 0 2147483647 2147483647 25075 iRM Pre-emption UA4.1
<IrmPreemptionExtendedParams> UA4][Others]
This parameter specifies a list of Call Types, as defined in 3GPP TS, the drift
callTypeList GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> partial customer_tuning Radio Call Trace N.A. Enumerate N.A. 30223 UA05 call trace enhancements UA5.0
calls, and the incoming calls due to relocation.
This parameter specifies a list of Call Types, as defined in 3GPP TS, the drift
callTypeList NeighbouringSession 0 RNC <RNC>-<CallTrace>-<NeighbouringSession> partial customer_tuning Radio Call Trace N.A. Enumerate N.A. 30223 UA05 call trace enhancements UA5.0
calls, and the incoming calls due to relocation.
This parameter is used to activate the switch off of the radio part of the MCPA in
candidateForSwitchOff PaResource 3 BTS <BTSEquipment>-<PaResource> none customer_setting Radio Power Management SwitchOff N.A. Boolean FAUX 34396 Automatic Carrier Switchoff UA7.1
case of AC mains failure detection.
<BTSEquipment>-<MCTRX>- This parameter is used to activate the switch off of the radio part of the MC-TRC
candidateForSwitchOff PaResourceMCTRX 3 BTS none customer_setting Radio Power Management SwitchOff N.A. Boolean FAUX 80499 3G Support of MC-TRX 900MHz UA7.1
<PaResourceMCTRX> PA in case of AC mains failure detection.
<BTSEquipment>-<RemoteRadioHead>- This parameter is used to activate the switch off of the radio part of the RRH
candidateForSwitchOff PaResourceRRH 3 BTS none customer_setting Radio Power Management SwitchOff N.A. Boolean FAUX 34396 Automatic Carrier Switchoff UA7.1
<PaResourceRRH> MCPA in case of AC mains failure detection.
<RadioAccessService>-<Imcta>- Unified RRM Step 2 : Cell Load information
capacityClass InterSystemHoConfClass 3 RNC none system_restricted Radio Mobility [HHO][3G2G] Class of capacity % Integer 1 100 100 33326 UA6.0
<InterSystemHoConfClass> exchange between 2G and 3G
RNC Connection to multiple Core Network
capacityIndication CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none system_restricted Transport Iu Flex N.A. Integer 1 100 1 29417 UA5.0
nodes (Iu-Flex)
RNC Connection to multiple Core Network
capacityIndication PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none system_restricted Transport Iu Flex N.A. Integer 1 100 1 29417 UA5.0
nodes (Iu-Flex)
<RadioAccessService>-<ImcraImcta>- Variable to be defined for validating the rejection condition with respect to arrival
carArrivalRate CarrierArrivalCondition 3 RNC none expert_tuning Radio Call Admission Control CAC N.A. Enumerate N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierArrivalCondition> rate, e.g. GlobalArrivalRate, CSArrivalRate, PSArrivalRate
<RadioAccessService>-<ImcraImcta>-
carArrivalThreshold CarrierArrivalCondition 3 RNC none expert_tuning Radio Call Admission Control CAC Threshold to be defined for the corresponding variable defined in crrArrivalRate N.A. Integer 0 65535 1 N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierArrivalCondition>
<RadioAccessService>-<ImcraImcta>-
carOperator CarrierArrivalCondition 3 RNC none expert_tuning Radio Call Admission Control CAC Operator for the load condition to be considered for Arrival rate condition check N.A. Enumerate N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierArrivalCondition>
Algorithm to pre-select inter-frequency carriers for iMCTA. The pre-selection is
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- necessary if more than two inter-frequency carriers are configured. The algorithm iMCTA Enhanced with HSPA Load – Blind
carrierPreSelectAlgorithm 3 RNC none customer_setting Radio Mobility Measurements N.A. Enumerate carrierLoad 89858 UA8.1
ocation <FddIntelligentMultiCarrierTrafficAllocation> cares for a maximum of two inter-frequency carriers to be measured by the UE HHO – Direct HHO on AO Upsize
(3GPP restricti
Algorithm to pre-select inter-frequency carriers for iMCTA. The pre-selection is
<RNC>-<NeighbouringRNC>-
NeighbouringRNCIntelligentMultiC necessary if more than two inter-frequency carriers are configured. The algorithm iMCTA Enhanced with HSPA Load – Blind
carrierPreSelectAlgorithm 3 RNC <NeighbouringRNCIntelligentMultiCarrierTrafficAllo none customer_setting Radio Mobility Measurements N.A. Enumerate carrierLoad 89858 UA8.1
arrierTrafficAllocation cares for a maximum of two inter-frequency carriers to be measured by the UE HHO – Direct HHO on AO Upsize
cation>
(3GPP restricti
iMCRA - traffic balancing at RRC connection
<RadioAccessService>-<Imcra>-
carrierSelectionListId ImcraAction 3 RNC none customer_setting Radio Mobility RRC Redirection Reference to a CarrierSelectionList MO instance N.A. ServiceLink N.A. 89857 establishment with Programmable Actions UA8.1
<ImcraActionList>-<ImcraAction>
Matrix
cbsActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Broadcast Services CBS Indicate if the Cell Broadcast Service feature is activated in the current FddCell N.A. Boolean FAUX 21092 Cell Broadcast service UA7.0
CBS frame offset (K), integer number of radio frames (10 ms).
Both parameters K & N define the CTCH occasions on the FACH #3.
CTCH occasions are calculated as follow:
cbsFrameOffset CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial system_restricted Radio Broadcast Services CBS ms Integer 0 2550 10 0 21092 Cell Broadcast service UA7.0
SFN = (K + m N), m = 0, 1,..., M, with M chosen that K+MN =< MaxSFN
The value of K
Number of the CTCH block sets (CTCH-BS) of the CBS schedule period (used
cbsSchedulePeriodDuration CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial system_restricted Radio Broadcast Services CBS N.A. Integer 0 255 1 200 21092 Cell Broadcast service UA7.0
only if CBS Schedule Period is fixed);
External Document Page 7 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
cellId_format1_btsId Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_setting Radio Mobility [HHO][CDMA] CDMA BTS Identifier. N.A. Integer 0 63 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
CDMA sector Identifier.
cellId_format1_sectorId Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_setting Radio Mobility [HHO][CDMA] N.A. Integer 0 3 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
bit string (4 bits)
cellId_format2_cdma1xCellId Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_setting Radio Mobility [HHO][CDMA] CDMA Cell ID for the format 2 N.A. Integer 0 8191 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
CDMA sector Identifier.
cellId_format2_sectorId Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_setting Radio Mobility [HHO][CDMA] N.A. Integer 0 7 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
s)
Pointer to the fddCell triggering switch on on this cell (cell with carrier active).
cellIdForSwitchOn FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management SwitchOff Also used to identify the possible cell on which to reconfigure HsXpa in case of N.A. ServiceLink N.A. 34396 Automatic Carrier Switchoff UA7.1
AC main failure.
List of Cell-Id of the cells to be traced. The Cell-Id is the UC-ID. Up to 250 cells
cellIdList CellSession 0 RNC <RNC>-<ObjectTrace>-<CellSession> partial customer_setting Radio Call Trace can be configured for RNCs 9370 fitted with CP3 HW boards and up to 500 cells N.A. String 0 N.A. 14759 Full Call Trace (UMTS02) UA2.0
can be configured for RNCs 9370 fitted with CP4 HW boards.
List of Cell-Ids of the cells to be traced.
The Cell-Id is the UC-Id.
cellIdList FailureSession 0 RNC <RNC>-<CallTrace>-<FailureSession> partial expert_tuning Radio Call Trace N.A. String 0 N.A. 120498 UA09 Call Trace Developments LR13.1
Up to 250 cells can be configured.
If the cell-id-list is empty then all cells (the entire RNS) are traced.
List of Cell-Id of the cells to be traced. The Cell-Id is the UC-ID. Up to 250 cells
cellIdList GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> partial customer_tuning Radio Call Trace can be configured for RNCs 9370 fitted with CP3 HW boards and up to 500 cells N.A. String 0 N.A. 14759 Full Call Trace (UMTS02) UA2.0
can be configured for RNCs 9370 fitted with CP4 HW boards.
List of Cell-Id of the cells to be traced. The Cell-Id is the UC-ID. Up to 250 cells
cellIdList NeighbouringSession 0 RNC <RNC>-<CallTrace>-<NeighbouringSession> partial customer_tuning Radio Call Trace can be configured for RNCs 9370 fitted with CP3 HW boards and up to 500 cells N.A. String 0 N.A. 30223 UA05 call trace enhancements UA5.0
can be configured for RNCs 9370 fitted with CP4 HW boards.
List of Cell-Id of the cells to be traced. The Cell-Id is the UC-ID. Up to 250 cells
cellIdList RNCSession 0 RNC <RNC>-<ObjectTrace>-<RNCSession> partial customer_setting Radio Call Trace N.A. String 0 <Null> 34583 UA07 Call Trace Development UA7.0
can be configured.
TS 25.413
This value is used to report the UE position to the Core Network with a fixe
cellIdPositioningMethodAccuracy FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Location Services N.A. Integer 0 127 60 21295 Enhanced Cell Coverage Location Report UA3.0
accuracy. It corresponds to the accuracy code k targeted according to the
formula given the accuracy in meter 10*(1.1^k -1).
TS 25.413
This value is used to report the UE position to the Core Network with a fixed
cellIdPositioningMethodAccuracy NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none expert_tuning Radio Location Services N.A. Integer 0 127 60 21295 Enhanced Cell Coverage Location Report UA3.0
accuracy. It corresponds to the accuracy code k targeted according to the
formula given the accuracy in meter 10*(1.1^k -1).
Feature Activation Flag. Defines if the CellId/RTT feature is activated. True
cellIdRttActivationAllowed LocationServices 3 RNC <RNC>-<LocationServices> none customer_init Radio Location Services N.A. Boolean FAUX 24089 Enhanced Cell Coverage positioning with RTT UA6.0
means activated
<RNC>-<LocationServices>- Defines if CellId/RTT feature is activated for commercial location services. True
cellIdRttParamsEnabled CommercialLocationServices 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 25027 Advanced Location Services UA6.0
<CommercialLocationServices> means activated
<RNC>-<LocationServices>- Defines if CellId/RTT feature is activated for emergency location services. True
cellIdRttParamsEnabled EmergencyLocationService 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 25027 Advanced Location Services UA6.0
<EmergencyLocationService> means activated.
CallTracePeriodicLocationService <RNC>-<LocationServices>-
cellIdRttParamsMaxResponseTime 3 RNC none customer_tuning Radio Call Trace Max allowed delay for location fix using enhanced CellId/RTT method s Integer 1 60 15 34582 UE positionning information to CTg and CTb UA8.1
s <CallTracePeriodicLocationServices>
<RNC>-<LocationServices>-
cellIdRttParamsMaxResponseTime CommercialLocationServices 3 RNC none expert_tuning Radio Location Services Max allowed delay for location fix using enhanced CellId/RTT method s Integer 1 60 5 25027 Advanced Location Services UA6.0
<CommercialLocationServices>
<RNC>-<LocationServices>-
cellIdRttParamsMaxResponseTime EmergencyLocationService 3 RNC none expert_tuning Radio Location Services Max allowed delay for location fix using enhanced CellId/RTT method s Integer 1 60 5 25027 Advanced Location Services UA6.0
<EmergencyLocationService>
TS 25.331 Cell individual offset
<RNC>-<NodeB>-<FDDCell>- Used to offset measured quantity value.
DummyUmtsNeighbouringFddCell
cellIndividualOffset 3 RNC <Cdma1xMobilityInfo>- none customer_setting Radio Mobility For each cell that is monitored, an offset can be assigned with inband signalling. dB Float -10 10 0,5 0 33853 Support of WCDMA to CDMA Handover UA6.0
List
<DummyUmtsNeighbouringFddCellList> The offset can be either positive or negative. The offset is added to the
measurement quantity be
<RNC>-<UmtsNeighbouring>-
FddNeighCellSelectionInfoConnec
cellIndivOffset 3 RNC <UmtsNeighbouringRelation>- none customer_tuning Radio Mobility [Cell Selection] used to offset measured quantity value dB Float -20 20 0,5 0 33820 Broadcast of SIB12 UA6.0
tedMode
<FddNeighCellSelectionInfoConnectedMode>
Enables cell load threshold sub feature of the Smart EDCH resource usage
cellLoadS1ThresholdSmartEdchResourceUsageActivati
EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control feature for TTI selection. N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
on
Meaningful only if smartEdchResourceUsageActivation is True
<RadioAccessService>-<AlwaysOnConf>-
cellPchToIdleTimer AlwaysOnTimer 3 RNC none customer_tuning Radio PS Call management Always-on min Integer 1 7200 1 29840 Commercial Hsupa introduction UA5.0
<AlwaysOnTimer>
<RadioAccessService>-<AutomatedCellBarring>- This parameter defines the percentage of cells that are updated on the RNC
cellPercentage CoreNetworkOverload 3 RNC none expert_tuning Radio Load Management Cell Barring % Integer 1 25 20 31805 Automatic Cell Barring on Service Outage UA5.0
<CoreNetworkOverload> during the TimeCellBarring interval.
<RadioAccessService>-<AutomatedCellBarring>- This parameter defines the percentage of cells that are updated on the RNC each
cellPercentage IuFailure 3 RNC none expert_tuning Radio Load Management Cell Barring % Integer 1 25 20 31805 Automatic Cell Barring on Service Outage UA5.0
<IuFailure> TimeCellBarring cycle when automated cell barring is activated for Iu Failure.
<RadioAccessService>-<AutomatedCellBarring>- This parameter defines the percentage of cells that are updated on the RNC
cellPercentage ManualActivation 3 RNC none expert_tuning Radio Load Management Cell Barring % Integer 1 25 20 31805 Automatic Cell Barring on Service Outage UA5.0
<ManualActivation> when manual cell barring is activated.
<RadioAccessService>-<AutomatedCellBarring>- This parameter defines the percentage of cells that are updated on the RNC
cellPercentage OverloadCongestion 3 RNC none system_restricted Radio Load Management Cell Barring % Integer 1 25 20 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion> when automated cell barring is activated.
Profile of the cell. This parameter is used to provision future BTS algorithm
depending on the cell profile.
In UA04.1, only default value is supported.
Possible values are:
cellProfile BTSCell 3 BTS <BTSEquipment>-<BTSCell> none system_restricted Radio Accessibility N.A. Enumerate notConfigured 0 none LR Future
0:
NOT CONFIGURED
1:
TU_3
2:
TU_50
3:
TU_120
13:
RA_120
14:
RA
TS 25.331
<RNC>-<CellProfiles>- When the parameter barredornot is indicated as "not barred", "not reserved" for
cellReservationExtension CellAccessRestriction 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring operator use and "not reserved" for future extension (Cell Reservation N.A. Enumerate notReserved 13452 3G to 2G Cell Reselection UA2.0
<CellAccessRestriction> Extension),the UE may select/re-select this cell during the cell selection and cell
re-select
TS 25.331
<RNC>-<CellProfiles>- When the parameter barredornot is indicated as "not barred", "not reserved" for
CellAccessRestrictionConnected Enhancements for Call Setup in Cell FACH
cellReservationExtension 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring operator use and "not reserved" for future extension (Cell Reservation N.A. Enumerate notReserved Q00852432 UA5.0
Mode mode
<CellAccessRestrictionConnectedMode> Extension),the UE may select/re-select this cell during the cell selection and cell
re-select
TS 25.331
<RNC>-<CellProfiles>- When the parameter barredornot is indicated as "not barred" and "reserved" for
cellReservedForOperatorUse CellAccessRestriction 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring operator use, UEs assigned to Access Class 11 or 15 may select/re-select this N.A. Enumerate notReserved 13452 3G to 2G Cell Reselection UA2.0
<CellAccessRestriction> cell if in the home PLMN and UEs assigned to an Access Class in the range 0 to
9 and 12
External Document Page 8 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
TS 25.331
<RNC>-<CellProfiles>- When the parameter barredornot is indicated as "not barred" and "reserved" for
CellAccessRestrictionConnected Enhancements for Call Setup in Cell FACH
cellReservedForOperatorUse 3 RNC <CellAccessRestrictionProfile>- none customer_setting Radio Load Management Cell Barring operator use, UEs assigned to Access Class 11 or 15 may select/re-select this N.A. Enumerate notReserved Q00852432 UA5.0
Mode mode
<CellAccessRestrictionConnectedMode> cell if in the home PLMN and UEs assigned to an Access Class in the range 0 to
9 and 12
Parameter Class Evolution in UA08 & UTRAN
cellSelectionProfileId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility [Cell Selection] Identifier of the CellSelectionProfile N.A. ServiceLink N.A. 80685 UA8.1
model simplification
Parameter Class Evolution in UA08 & UTRAN
cellSelectionWithPriorityProfileId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility [Cell Selection] Identifier of the CellSelectionwithPriorityProfile N.A. ServiceLink N.A. 80685 UA8.1
model simplification
<RadioAccessService>-<DedicatedConf>-
cellShrinkStep ShutdownConfClass 3 RNC none expert_tuning Radio Power Management Shutdown Step of CPICH power decrease dBm Float 0 50 0,1 20 28584 NodeB soft shutdown UA6.0
<ShutdownConfClass>
<RadioAccessService>-<DedicatedConf>-
cellShrinkStepDuration ShutdownConfClass 3 RNC none expert_tuning Radio Power Management Shutdown Duration between each shrink step s Integer 0 3600 0 28584 NodeB soft shutdown UA6.0
<ShutdownConfClass>
cellSize BTSCell 2 BTS <BTSEquipment>-<BTSCell> partial customer_setting Radio Design Represents the size of the cell. km Enumerate from5to10 34667 Parameter Class Evolution in UA07 UA7.0
cellStatusEvaluationPeriod MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS This parameter defines the cell status evaluation period s Integer 30 600 30 120 31868 MBMS Broadcast UA7.1
<RNC>-<NodeB>-<FDDCell>- Define the type of Cells used to determine 1xCdma handover.
cellType Cdma1xMobilityInfo 3 RNC none customer_setting Radio Mobility [HHO][CDMA] N.A. Enumerate cellTypeNormal 33853 Support of WCDMA to CDMA Handover UA6.0
<Cdma1xMobilityInfo> Value Buffer means "for handover only and does not accept any umts call"
The wait time before UE in PCH state can repeat rejected cell update. The value
cellUpdateWaitTimeForPchUe ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none system_restricted Radio PS Call management Always-on s Integer 0 15 15 26673 URA_PCH UA5.0
0 indicates that repetition is not allowed
channelActivityTime OcnsHsdpa 2 RNC <RNC>-<NodeB>-<FDDCell>-<OcnsHsdpa> partial customer_tuning Radio Power Management OCNS Defines the duration, in minutes, that a particular OCNS channel shall be ON min Integer 0 1440 10 20 34195 Support OCNS with HSDPA UA6.0
<RNC>-<NodeB>-<FDDCell>- The Chip Offset is defined as the radio timing offset inside a radio frame.
chipOffset OCNSChannelsParameters 2 RNC partial system_restricted Radio Power Management OCNS N.A. Integer 0 38399 36608 13497 Orthogonal Channel Noise simulation UA3.0
<OCNSChannelsParameters> unit given in Tchip (where Tchip=1/3.84e6)
<RadioAccessService>-<DedicatedConf>- This choice allows the operator to tailor which formula(s) is (are) used for the
choiceOfFormulaForSwitchOff AutoSwitchOffConfClass 3 RNC none customer_setting Radio Power Management SwitchOff N.A. Enumerate RLLoad 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> Auto Carrier Switch Off feature
TS23.003
ci GSMCell 3 RNC <RNC>-<GSMNeighbour>-<GSMCell> none customer_setting Radio Design The Cell Global Identification (CGI) is the concatenation of the Location Area N.A. Integer 0 65535 N.A. 0 none UA1
Identification and (LAI) the Cell Identity (CI):
CGI = LAI + CI,
TS 25.041, 9.4.2.2.5
Number of pages 1 byte
cibData CibsMessage 3 RNC <RNC>-<NodeB>-<FDDCell>-<CibsMessage> none system_restricted Radio Broadcast Services CBS N.A. HexString 168 168 N.A. 21092 Cell Broadcast service UA7.0
CBS message information page 82 bytes
CBS message information length 1 byte
TS 23.038, 5
cibDataCodingScheme CibsMessage 3 RNC <RNC>-<NodeB>-<FDDCell>-<CibsMessage> none system_restricted Radio Broadcast Services CBS This parameter identifies the alphabet / coding and the language applied to a N.A. BitString 8 8 N.A. 21092 Cell Broadcast service UA7.0
CBS message
cibRepetitionPeriod CibsMessage 3 RNC <RNC>-<NodeB>-<FDDCell>-<CibsMessage> none system_restricted Radio Broadcast Services CBS Interval between each CBS message. s Integer 2 3600 10 21092 Cell Broadcast service UA7.0
TS 23.038, 9.4.1.2.1
cibSerialNumber CibsMessage 3 RNC <RNC>-<NodeB>-<FDDCell>-<CibsMessage> none system_restricted Radio Broadcast Services CBS N.A. HexString 4 4 N.A. 21092 Cell Broadcast service UA7.0
Identifies a particular CBS message
TS 23.041, 9.4.1.2.2
cibsMessageId CibsMessage 3 RNC <RNC>-<NodeB>-<FDDCell>-<CibsMessage> none system_restricted Radio Broadcast Services CBS N.A. HexString 4 4 N.A. 21092 Cell Broadcast service UA7.0
Identifies the source and type of the CBS message
This parameter is used to indicate if ciphering is enabled by the RNC for a
specific CN domain, and is used when the RNC receives a command to activate Radio Interface Ciphering (transparent / non
ciphering CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none customer_setting Radio Protocols Ciphering N.A. Enumerate cipheringDisabledIgnore 13472 UA3.0
ciphering (in a RANAP SMC or in an incoming relocation request). If transparent)
SecurityControl is set to securityD
This parameter is used to indicate if ciphering is enabled by the RNC for a
specific CN domain, and is used when the RNC receives a command to activate Radio Interface Ciphering (transparent / non
ciphering PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none customer_setting Radio Protocols Ciphering N.A. Enumerate cipheringDisabledIgnore 13472 UA3.0
ciphering (in a RANAP SMC or in an incoming relocation request). If transparent)
SecurityControl is set to securityD
This parameter is used by RNC for RLC-TM as the offset to add to the current
CFN. The result gives the activation time to start the ciphering on a MAC-d layer Radio Interface Ciphering (transparent / non
cipheringCfnActivTimeOffset RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols Ciphering N.A. Integer 0 255 200 13472 UA3.0
and is rounded up to a 80 ms TTI boundary.
transparent)
It is given in connection frame number of 10ms
This parameter is used by RNC as the offset to add to the current RLC Sequence
Radio Interface Ciphering (transparent / non
cipheringSnActivTimeOffset RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols Ciphering Number. The result gives the activation time to start the ciphering on a RLC layer. N.A. Integer 0 127 0 13472 UA3.0
transparent)
It applies to RLC-AM and RLC-UM, to signaling RBs and traffic RBs.
<RadioAccessService>-<SccpchClass>- This boolean indicates, if True, that the fachClassId provisionned for this instance
cmChPIused DxChConf 0 RNC critical system_restricted Radio Channels & Bearers System N.A. Boolean N.A. 16717 RRC States Management UA3.0
<DxChConf> of DxChConf must be taken account by the Mac-D.
Indicates the delay to add to the CFN to determine the activation time of the 3G to 2G Handover with GSM measurements
cModeDeltaCfn CModeConfiguration 3 RNC <RadioAccessService>-<CModeConfiguration> none system_restricted Radio Mobility Compressed Mode N.A. Integer 0 255 152 13447 UA2.0
compressed mode. It is given in connection frame number of 10ms (With and without Compressed Mode)
TS 25.331 DeltaSir1
Delta in DL SIR target value to be set in the UE during the frame containing the 3G to 2G Handover with GSM measurements
cmodePCDeltaSir1 DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Mobility Compressed Mode dB Float 0 3 0,1 0 13447 UA2.0
start of the first transmission gap in the transmission gap pattern (without (With and without Compressed Mode)
including the effect of the bit-rate increase)
TS 25.331 DeltaSirAfter1
3G to 2G Handover with GSM measurements
cmodePCDeltaSirAfter1 DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Mobility Compressed Mode Delta in DL SIR target value to be set in the UE one frame after the frame dB Float 0 3 0,1 0 13447 UA2.0
(With and without Compressed Mode)
containing the start of the first transmission gap in the transmission gap pattern.
25.331 ITP
3G to 2G Handover with GSM measurements
cmodePCItp DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Mobility Compressed Mode Initial Transmit Power is the uplink power control method to be used to compute N.A. Enumerate cmodeItpMode0 13447 UA2.0
(With and without Compressed Mode)
the initial transmit power after the compressed mode gap.
TS 25.331 RPP
Recovery Period Power control mode during the frame after the transmission gap 3G to 2G Handover with GSM measurements
cmodePCRpp DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Mobility Compressed Mode N.A. Enumerate cmodeRppMode0 13447 UA2.0
within the compressed frame. Indicates whether normal PC mode or compressed (With and without Compressed Mode)
PC mode is applied
This parameter indicates the delay to add to the CFN in order to determine the
3G to 2G Handover with GSM measurements
cModeShoDeltaCfn CModeConfiguration 3 RNC <RadioAccessService>-<CModeConfiguration> none system_restricted Radio Mobility Compressed Mode reception time of the NBAP RL Setup Request at NodeB level while the N.A. Integer 0 255 100 13447 UA2.0
(With and without Compressed Mode)
compressed mode is active. It is given in connection frame number of 10ms.
commercialLocationServiceActivationAllowed LocationServices 3 RNC <RNC>-<LocationServices> none customer_init Radio Location Services Defines if commercial location services are allowed N.A. Boolean FAUX 25027 Advanced Location Services UA6.0
Defines the Commited Information Rate (CIR) to be used by the NodeB for UL
<BTSEquipment>-<IpRan>- traffic on IP for the corresponding EthernetBandwidthPool. The CIR is expressed
committedInformationRate EthernetBandwidthPool 3 BTS critical expert_tuning Transport Ethernet % Integer 0 100 1 100 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> as a percentage of the (configured) UL bandwidth of either the Ethernet Port OR
the LAGroup where th
commonERGCHPowerOffset EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA dB Float -35 15 0,1 -35 33481 E-AGCH Power Control UA5.1
common MAC-ehs Type
OMC-R to check
<RadioAccessService>-<DedicatedConf>-
commonMacEhsType CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none system_restricted Radio HSDPA FACH (1) Each role (CCCH, DCCH, DTCH) is only assigned once, e.g. if one queue is N.A. Enumerate CCCH_DCCH_DTCH Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<CommonPriorityQueue> assigned with CCCH; other queue can not be assigned with CCCH, or
CCCH_DCCH, or CCCH_DCCH_DTCH.
TS 25.433
<RadioAccessService>-<DedicatedConf>-
commonMeasurementFilterCoef NBAPMeasurement 3 RNC none expert_tuning Radio Measurements NBAP Indicates the filtering coefficient to be applied to the common measurements
N.A. Enumerate 3 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
<MeasurementConfClass>-<NBAPMeasurement>
Defines the coefficient filter used by Node B
<RadioAccessService>-<DedicatedConf>- TS 25.433
commonMeasurementReportingPeriod NBAPMeasurement 3 RNC none expert_tuning Radio Measurements NBAP ms Integer 10 3600000 10 60000 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
<MeasurementConfClass>-<NBAPMeasurement> It defines the reporting period for common measurement.
This parameter defines, in a PLMN id supported by the RNC in MOCN, the
commonMobileCountryCode MocnParams 3 RNC <RNC>-<MocnParams> none customer_init Radio Design MOCN mobileCountryCode parameter which is a 3 digits BCD-string (each digit is coded N.A. BcdString 3 3 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
on 4 bits, which results finally in a 12 bits-long string)
This parameter defines, in a PLMN id supported by the RNC in MOCN, the
commonMobileNetworkCode MocnParams 3 RNC <RNC>-<MocnParams> none customer_init Radio Design MOCN mobileNetworkCode parameter which is a 2 or 3 digits BCD-string (each digit is N.A. BcdString 2 3 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
coded on 4 bits, which results finally in a 8 or 12 bits-long string)
<RadioAccessService>-<DedicatedConf>- threshold used for decision of transition of DL Code cell load colour from
congested2NormalCLCThreshold IrmPreemptionCacParams 3 RNC none expert_tuning Radio Load Management Pre-emption % Integer 0 100 60 25075 iRM Pre-emption UA4.1
<CacConfClass>-<IrmPreemptionCacParams> congested to normal
Threshold used for decision of transition of Dl CEM Cell Load Color from
<RadioAccessService>-<DedicatedConf>-
IrmPreemptionCEMLoadParamet Congested to Normal
congested2NormalDlCEMThreshold 3 RNC <NodeBConfClass>- none expert_tuning Radio Load Management IRM % Integer 0 100 100 27741 CEM load in iRM UA5.0
ers For set OnLine, new value to be taken into account after Next estimation of CEM-
<IrmPreemptionCEMLoadParameters>
Load
<RadioAccessService>-<DedicatedConf>-
IrmPreemptionIubTransportLoadP Threshold (in %) used for decision of transition of Downlink Transport cell Load
congested2NormalDlTLCThreshold 3 RNC <NodeBConfClass>- none expert_tuning Radio Load Management Pre-emption % Integer 0 100 80 27740 Iub load in iRM UA4.2
arameters Color from Congested state to Normal state.
<IrmPreemptionIubTransportLoadParameters>
<RadioAccessService>-<DedicatedConf>- threshold used for decision of transition of DL Power cell load colour from
congested2NormalPLCThreshold IrmPreemptionCacParams 3 RNC none expert_tuning Radio Load Management Pre-emption % Integer 0 100 60 25075 iRM Pre-emption UA4.1
<CacConfClass>-<IrmPreemptionCacParams> congested to normal
<RadioAccessService>-<DedicatedConf>-
IrmPreemptionCEMLoadParamet This parameter defines the threshold on uplink CEM load to transition the uplink
congested2NormalULCEMThreshold 3 RNC <NodeBConfClass>- none expert_tuning Radio Load Management congestion control % Integer 0 100 100 34228 RRM developments UA6.0
ers CEM load color from congested to normal
<IrmPreemptionCEMLoadParameters>
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on uplink radio load to transition the uplink
congested2NormalULRLThreshold IrmPreemptionCacParams 3 RNC none expert_tuning Radio Load Management congestion control % Integer 0 100 100 34228 RRM developments UA6.0
<CacConfClass>-<IrmPreemptionCacParams> radio load color from congested to normal
This parameter defines the target state for congestion pre-emption in case of
congestionDowngradeReleaseTarget RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Load Management congestion control release DCH. If set to Cell_FACH, the user is sent to Cell_FACH. If set to N.A. Enumerate Cell_FACH 34228 RRM developments UA6.0
IuRelease, the Iu Release procedure is invoked for that user
This parameter defines the waiting time, the preemption algorithm waits after
<RadioAccessService>-<DedicatedConf>-
congestionWaitTime IrmPreemptionCacParams 3 RNC none expert_tuning Radio Load Management congestion control downgrading PS users in case of air interface congestion before checking the pre- Integer 100 10000 100 2000 34228 RRM developments UA6.0
<CacConfClass>-<IrmPreemptionCacParams>
emption color (congestion state), again
connectionMode NodeB 0 RNC <RNC>-<NodeB> none customer_setting Radio Design N.A. Enumerate N.A. 0 none LR Future
This is a pointer to the identity of the EdpchInfoClass selected for Conservative E-
conservativeEdpchInfoClassId UlUserService 3 RNC <RadioAccessService>-<UlUserService> none customer_setting Radio HSUPA UL Radio Load N.A. ServiceLink N.A. 121938 Enhanced SIR improvement LR Future
TFCI table, when isEnhancedSirAllowed is True
This parameter is used to select the final set of cells for which the pCPICH power
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
consideredAdjacencyLevelsForIncrease PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] should be increased. A cell having an adjacency level greater than this value Integer 1 3 1 2 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
cannot be selected.
This parameter is used to select the final set of cells for which the pCPICH power
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
consideredLoadLevelsForIncrease PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] should be increased. A cell having a load level greater than this value cannot be Integer 1 3 1 2 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
selected.
TS 25.331
constantValue RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none expert_tuning Radio Power Management RACH This constant value is used by the UE to calculate the initial output power on dB Integer -35 -10 -10 24774 RACH Capacity Enhancements UA2.1
PRACH according to the Open loop power control procedure.
ControlPort identifier,
It models the ATM ports for AAL5 NBAB messages. 1 discrete VCC aal5 is used
controlPortId ControlPort 0 RNC <RNC>-<NodeB>-<ControlPort> partial system_restricted Radio Design N.A. Integer 0 NControlPort - 1 N.A. 28018 3GPP compliant Iub: Alcap UA6.0
for CP (CCM is the terminating point for NBAPcp). 6 discrete VCCs aal5 are
used for CCP (CEM is the terminating point for NBAPccp). .
Type of the control Port: nodeB Control Port or Communication Control Port or
controlPortType ControlPort 0 RNC <RNC>-<NodeB>-<ControlPort> partial system_restricted Radio Design N.A. Enumerate N.A. 28018 3GPP compliant Iub: Alcap UA6.0
single Control Port.
<RadioAccessService>-<DlRbSetConf>- This smaller window is a subwindow of Iu startpoint. It references the target
coreNetworkWs IuCsTimingAlignment 3 RNC none system_restricted Radio Synchronisation Iu-CS Timing Alignment ms Integer 0 255 N.A. 22788 Iu-CS Timing Alignment UA3.1
<IuCsTimingAlignment> arrival time of the Iu DL frames.
Absolute per TMU minimal number of emergency calls to be traced by the
CoreSession / CTa session independently from overall CallP traffic call volume.
coreSessionEmergencyCallTracingFloor CallTraceConfClass 0 RNC <RNC>-<CallTraceConfClass> critical expert_tuning Radio Call Trace N.A. Integer 0 2147483647 N.A. 106719 RNC Call Trace Capacity Realignment LR13.1
Effective emergency call tracing level for the CoreSession / CTa session is to be
the maximum of this fl
<RadioAccessService>-<DedicatedConf>-
The hard handover decision is taken when hard handover decision counter, based
counter FastAlarmHardHoConf 3 RNC <HoConfClass>-<UsHoConf>- none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] N.A. Integer 0 100 2 25757 Fast Alarm Handover triggering UA4.1
on Cpich RSCP or Cpich Ec/N0 criterion, is above this quantity.
<FastAlarmHardHoConf>
(301.0,302.0,303.0,304.0,305.0,306.0,3
06.1,306.2,306.3,306.4,307.0,307.1,30
List of counterScreening with counterScreening is a string having the form
7.2,307.3,307.4,308.0,308.1,308.2,308.
<counterId>.<scrId> (decimal digits dot decimal digits). counterId range = Counter capacity improvement, counter volume
counterScreeningList PerfScanner 3 RNC <RNC>-<PerfScanner> none customer_tuning Radio Counters N.A. String 0 3,308.4,309.0,309.1,309.2,309.3,309.4, 34648 UA7.0
[0..4095] and scrId range = [0..255]. If all screenings of a counter have to be set, control
310.0,310.1,310.2,310.3,310.4,701.0,7
scrId = 255 is used
01.1,702.0,702.1,703.0,703.1,801.0,80
1.1,801.2,801.3,802.0,802.1,80
(434.0,434.1,435.0,435.1,437.0,437.1,4
List of counterScreening with counterScreening is a string having the form 38.0,438.1,440.0,440.1,441.0,441.1,26
<counterId>.<scrId> (decimal digits dot decimal digits). counterId range = 07.0,2734.0,2735.0,2736.0,2620.0,2745
counterScreeningList RtPerfScanner 3 RNC <RNC>-<RtPerfScanner> none customer_tuning Radio Counters N.A. String 1 25101 Real Time Rnc Counters UA7.1
[0..4095] and scrId range = [0..255]. If all screenings of a counter have to be set, .0,2746.0,2747.0,2770.0,2770.1,2771.0
scrId = 255 is used ,2771.1,2780.0,2780.1,2781.0,2781.1,2
724.0,2724.1,2725.0,2725.1)
3GPP TS 25.331 Counting Scope
Used for UE counting
countingScope MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS Parameter applicable in PTM&PTP allowed Service Areas and PTM only Service N.A. Enumerate N.A. 31868 MBMS Broadcast UA7.1
Areas.
This parameter is not used in this release.
Determines the guarder time when the last RL non CPC or last F-DPCH RL is
removed of the active set, and before to reconfigure the remaining RL CPC
cpcCellConfigurationAfterAsuTimer FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility [SHO] ms Integer 0 100 2 10 83871 Continuous Packet Connectivity (CPC) LR Future
capable or to reconfigure the CPC with new incoming F-DPCH RL (Cell capable)
This is applicable when CPC fe
Serving Grant value to be used at the transition in DTX-Cycle-2.
[Continuous Packet (0..37) indicates E-DCH serving grant index as defined in 3GPP TS25.321; index
cpcDefaultServingGrantInDtxCycle2 EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio PS Call management N.A. Integer 0 38 1 38 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] 38 means zero grant.
subfra
Inactivity timer on HS-PDSCH/HS-SCCH transmission to switch to HS-DPCCH
cqiDtxTimerTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] me Enumerate 0 83871 Continuous Packet Connectivity (CPC) LR Future
gating state (CQI rate is then reducted to match UL DPCCH bursts)
(10ms)
subfra
Inactivity timer on HS-PDSCH/HS-SCCH transmission to switch to HS-DPCCH
cqiDtxTimerTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] me Enumerate 0 83871 Continuous Packet Connectivity (CPC) LR Future
gating state (CQI rate is then reducted to match UL DPCCH bursts)
(2ms)
it specifies CQI Feedback Cycle k for common E-DCH HS-DPCCH operation
<RadioAccessService>-<DedicatedConf>- (ACK/CQI feedback).
cqiFeedbackCycleK CommonEdchHsdpcchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH NBAP & SIB5 ms Enumerate 2 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchHsdpcchInfo>
cqiFeedbackCycleK HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none expert_tuning Radio HSDPA Scheduler This parameter provides the duration of the CQI feedback cycle ms Enumerate 2 27932 HSDPA Step1 UA4.2
[Continuous Packet This parameter provides the duration of the CQI feedback cycle (when the call is
cqiFeedbackCycleKForCpc CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management ms Enumerate 2 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] using CPC)
it specifies CQI Power Offset for common E-DCH HS-DPCCH operation
<RadioAccessService>-<DedicatedConf>-
(ACK/CQI feedback).
cqiPowerOffset CommonEdchHsdpcchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH N.A. Integer 0 8 1 6 108103 Enhanced Cell Fach for DL and UL LR14.2
NBAP & SIB5
<CommonEdchHsdpcchInfo>
This parameter indicates Power offset used in the UL between the HS-DPCCH
cqiPowerOffset HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none customer_tuning Radio HSDPA Power Control N.A. Integer 0 8 6 27932 HSDPA Step1 UA4.2
slots carrying CQI information and the associated DPCCH
This parameter indicates the power offset used in the UL between the HS-
cqiPowerOffsetOneLeg HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none customer_tuning Radio HSDPA Power Control DPCCH slots carrying CQI information and the associated DPCCH in case the N.A. Integer 0 8 14 82602 E-DCH user and cell throughput increase UA8.1
adaptive feature is enabled and only one radio leg is in the DCH active set.
it specifies CQI Repetition Factor for common E-DCH HS-DPCCH operation.
<RadioAccessService>-<DedicatedConf>-
NBAP & SIB5
cqiRepetitionFactor CommonEdchHsdpcchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH N.A. Integer 1 4 1 1 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchHsdpcchInfo>
cqiRepetitionFactor HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none expert_tuning Radio HSDPA Scheduler This parameter indicates the number of consecutive repetitions of the CQI N.A. Integer 1 4 1 27932 HSDPA Step1 UA4.2
[Continuous Packet This parameter indicates the number of consecutive repetitions of the CQI (when
cqiRepetitionFactorForCpc CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management N.A. Integer 1 4 11 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] the call is using CPC)
This parameter is used for the identification of cell edge eFACH users in order to
assign appropriate a maximum transport block size to be used. If the reported
cqiThresholdForCellEdgeECellFach EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio Power Management FACH N.A. Integer 0 30 1 15 108103 Enhanced Cell Fach for DL and UL LR14.2
Channel Quality Indicator (CQI) is below this threshold, the user is assumed to be
in cell edg
Channel quality indicator to mimic UE feedback to the NodeB scheduler. A value
cqiValue OcnsHsdpa 2 RNC <RNC>-<NodeB>-<FDDCell>-<OcnsHsdpa> partial expert_tuning Radio Power Management OCNS N.A. Integer 0 30 0 34195 Support OCNS with HSDPA UA6.0
of 0 indicates to the NodeB to create its own random CQI sequence.
<RadioAccessService>-<DedicatedConf>-
Algo1: grant credit in sequence by FCFS with a maxMacDCredit ; Algo2: every
creditAllocationAlgo CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none customer_setting Radio Power Management FACH N.A. Enumerate algo1 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
user that ask for credit get a percentage of credit.
<CommonPriorityQueue> 168710
<RNC>-<CsCoreNetworkAccess>- It is the step sent in the “Number of Step” IE of the RANAP OVERLOAD
criticalIncrStep CSSendingRanapOverloadControl 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP CONTROL message from RNC to CN when the RNC overload level stays in N.A. Integer 0 16 1 33804 Manual Overload Control UA5.0
<CSSendingRanapOverloadControl> Critical for another ignoreTimer.
<RNC>-<PsCoreNetworkAccess>- It is the step sent in the “Number of Step” IE of the RANAP OVERLOAD
criticalIncrStep PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP CONTROL message from RNC to CN when the RNC overload level stays in N.A. Integer 0 16 1 33804 Manual Overload Control UA5.0
<PSSendingRanapOverloadControl> Critical for another ignoreTimer.
<RadioAccessService>-<ImcraImcta>- Variable to be defined for validating the rejection condition with respect to CAC
crrFailureRate CarrierRejectionCondition 3 RNC none expert_tuning Radio Call Admission Control CAC N.A. Enumerate N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierRejectionCondition> failure rate, e.g. GlobalCacFailure, CSCacFailure, PSCacFailure
<RadioAccessService>-<ImcraImcta>-
crrFailureThreshold CarrierRejectionCondition 3 RNC none expert_tuning Radio Call Admission Control CAC Threshold to be defined for the corresponding variable defined in crrFailureRate % Integer 0 100 1 N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierRejectionCondition>
<RadioAccessService>-<ImcraImcta>- Operator for the load condition to be considered for CAC Failure Rate condition
crrOperator CarrierRejectionCondition 3 RNC none expert_tuning Radio Call Admission Control CAC N.A. Enumerate N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierRejectionCondition> check
<RNC>-<CsFlexService>-<CsNriParams>- RNC Connection to multiple Core Network
csCoreNetworkAccessId CsNriMapping 3 RNC none system_restricted Transport Iu Flex N.A. ServiceLink N.A. 29417 UA5.0
<CsNriMapping> nodes (Iu-Flex)
whether GBR IE in RAB parameter IE, or Alternative RAB IE, or SDU format
information parameter IE, or no IE is considered when 3 sub-flows CSD SCUDIF with 3subflow RAB and the first
csdDecisionUsingRanapIeFor3Subflows RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management SCUDIF N.A. Enumerate none 81432 UA7.1.2
configuration is decided in RAB matching. This parameter will be applied in CSD VTcall with 1subflow
RAB setup & modification only wh
Indicates the DRX cycle length coefficient used to be attached to a CN CS
domain in this cell.
csDrxCynLngCoef FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Accessibility Paging It refers to 'k' in the formula as specified in 25.304.
N.A. Integer 6 9 6 24075 Paging repetition enhancements UA2.1
The DRX cycle length shall be 2^k *PBP frames, where k is an integer and PBP is
the Paging Block Perio
This parameter determines the mapping of basic call types to CS group call type.
csGroupCall BasicCallType 3 RNC <RadioAccessService>-<BasicCallType> none expert_tuning Radio Call Admission Control CAC If the boolean is true, the corresponding basic call type (userLabel) is a part of N.A. Boolean N.A. 127550 Traffic Filtering in Cell Overload LR13.1
CS group call type
csNriLength MocnParams 3 RNC <RNC>-<MocnParams> none expert_tuning Radio Design MOCN Number of bits constituting the Network Resource Identifier for CS domain N.A. Integer 0 10 N.A. CR182545 RAN Model new parameter NRI length UA8.1
<RadioAccessService>-<ImcraImcta>-
Reference to an instance of the CarrierArrivalCondition object applied for filtering
csrArrivalConditionId CarrierSelectionCondition 3 RNC <CarrierSelectionList>-<CarrierSelectionRule>- none expert_tuning Radio Call Admission Control CAC N.A. ServiceLink N.A. 127550 Traffic Filtering in Cell Overload LR13.1
RRC Connection Requests
<CarrierSelectionCondition>
FDD carrier to be considered for the load condition.
<RadioAccessService>-<ImcraImcta>- This parameter includes two additional values with the following meanings: iMCRA - traffic balancing at RRC connection
csrCarrier CarrierSelectionCondition 3 RNC <CarrierSelectionList>-<CarrierSelectionRule>- none customer_setting Radio Mobility RRC Redirection - None indicates that no FDD carrier is to be defined due to no dependency on N.A. Enumerate N.A. 89857 establishment with Programmable Actions UA8.1
<CarrierSelectionCondition> carrier (e.g. condition is always TRUE) Matrix
- Foindic
<RadioAccessService>-<ImcraImcta>-
Reference to an instance of the CarrierRejectionCondition object applied for
csrFailureConditionId CarrierSelectionCondition 3 RNC <CarrierSelectionList>-<CarrierSelectionRule>- none expert_tuning Radio Call Admission Control CAC N.A. ServiceLink N.A. 127550 Traffic Filtering in Cell Overload LR13.1
filtering RRC Connection Requests
<CarrierSelectionCondition>
<RadioAccessService>-<ImcraImcta>- iMCRA - traffic balancing at RRC connection
csrLoadType CarrierSelectionCondition 3 RNC <CarrierSelectionList>-<CarrierSelectionRule>- none customer_setting Radio Mobility RRC Redirection Load be considered for the load condition N.A. Enumerate N.A. 89857 establishment with Programmable Actions UA8.1
<CarrierSelectionCondition> Matrix
<RadioAccessService>-<ImcraImcta>- iMCRA - traffic balancing at RRC connection
csrLoadValue CarrierSelectionCondition 3 RNC <CarrierSelectionList>-<CarrierSelectionRule>- none customer_setting Radio Mobility RRC Redirection Load of the configured load type N.A. Enumerate N.A. 89857 establishment with Programmable Actions UA8.1
<CarrierSelectionCondition> Matrix
<RadioAccessService>-<ImcraImcta>- iMCRA - traffic balancing at RRC connection
csrOperator CarrierSelectionCondition 3 RNC <CarrierSelectionList>-<CarrierSelectionRule>- none customer_setting Radio Mobility RRC Redirection Operator for the load condition N.A. Enumerate N.A. 89857 establishment with Programmable Actions UA8.1
<CarrierSelectionCondition> Matrix
iMCRA - traffic balancing at RRC connection
<RadioAccessService>-<ImcraImcta>-
csrTargetCarrierList CarrierSelectionRule 3 RNC none customer_setting Radio Mobility RRC Redirection List of applicable target carriers N.A. Enumerate N.A. 89857 establishment with Programmable Actions UA8.1
<CarrierSelectionList>-<CarrierSelectionRule>
Matrix
TS 25.331, 10.3.8.1
Period of CTCH allocation (N) on S-CCPCH, integer number of radio frames (10
ms).
ctchAllocationPeriod CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial system_restricted Radio Broadcast Services CBS ms Integer 10 2560 10 20 21092 Cell Broadcast service UA7.0
Both parameters K & N define the CTCH occasions on a dedicated FACH.
CTCH occasions are calculated as follow:
SFN = (K + m N), m = 0, 1,..., M, with
This parameter defines the timer for Duplication Avoidance and Reordering (DAR)
in the UE (RLC-UM) used for MTCH traffic reception.
darTimer MbmsRbConf 3 RNC none system_restricted Radio Broadcast Services MBMS ms Enumerate 5120 31868 MBMS Broadcast UA7.1
Timer when PDUs are released to the upper layers even though there are
outstanding PDUs with lower RLC SN values
Refer to
This parameter defines the window size for Duplication Avoidance and Reordering
(DAR) in the UE (RLC-UM) used for MTCH traffic reception.
darWindowSize MbmsRbConf 3 RNC none system_restricted Radio Broadcast Services MBMS N.A. Enumerate 64 31868 MBMS Broadcast UA7.1
The window size is expressed in number of RLC-UM PDUs
Refer to 3GPP TS 25.331 § 10.3.4.26 and TS 25.322
The trace file for this session is made available at the end of each such period if
dataFileUploadPeriod AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial system_restricted Radio Call Trace there is no other reason why to close a trace file (end of session or maximum file min Integer 1 60 15 14759 Full Call Trace (UMTS02) UA2.0
size reached).
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod CellSession 0 RNC <RNC>-<ObjectTrace>-<CellSession> partial system_restricted Radio Call Trace min Integer 1 60 15 14759 Full Call Trace (UMTS02) UA2.0
the option value in minute.
The trace file for this session is made available at the end of each such period if
datafileUploadPeriod CoreSession 0 RNC <RNC>-<CallTrace>-<CoreSession> partial system_restricted Radio Call Trace there is no other reason why to close a trace file (end of session or maximum file min Integer 1 60 15 14759 Full Call Trace (UMTS02) UA2.0
size reached).
The CT files for this session are made available to the OAM system on a
datafileUploadPeriod FailureSession 0 RNC <RNC>-<CallTrace>-<FailureSession> partial expert_tuning Radio Call Trace min Integer 1 60 1 15 120498 UA09 Call Trace Developments LR13.1
maximum periodical time duration indicated by the value of this parameter
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> partial system_restricted Radio Call Trace min Integer 1 60 15 14759 Full Call Trace (UMTS02) UA2.0
the option value in minute.
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod IuBcSession 0 RNC <RNC>-<ObjectTrace>-<IuBcSession> partial system_restricted Radio Call Trace min Integer 1 60 15 30223 UA05 call trace enhancements UA5.0
the option value in minute.
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod IuCsSession 0 RNC <RNC>-<ObjectTrace>-<IuCsSession> partial system_restricted Radio Call Trace min Integer 1 60 15 30223 UA05 call trace enhancements UA5.0
the option value in minute.
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod IuPsSession 0 RNC <RNC>-<ObjectTrace>-<IuPsSession> partial system_restricted Radio Call Trace min Integer 1 60 15 30223 UA05 call trace enhancements UA5.0
the option value in minute.
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod IuRSession 0 RNC <RNC>-<ObjectTrace>-<IuRSession> partial system_restricted Radio Call Trace min Integer 1 60 15 30223 UA05 call trace enhancements UA5.0
the option value in minute.
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod NeighbouringSession 0 RNC <RNC>-<CallTrace>-<NeighbouringSession> partial system_restricted Radio Call Trace min Integer 1 60 15 30223 UA05 call trace enhancements UA5.0
the option value in minute.
The trace file for this session is made available on a periodical value indicated by
datafileUploadPeriod SessionMTg 0 RNC <RNC>-<CallTrace>-<SessionMTg> partial system_restricted Radio Call Trace min Integer 1 60 15 33692 Subscriber Unit Air Status Measurement UA6.0
the option value in minute.
Indicates the maximum size of a trace file.
datafileUploadSize AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for the upload and the Kb Integer 200 2048 512 14759 Full Call Trace (UMTS02) UA2.0
OMC notified of its availability.
Indicates the maximum size of a trace file.
datafileUploadSize CellSession 0 RNC <RNC>-<ObjectTrace>-<CellSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for
Kb Integer 200 2048 512 14759 Full Call Trace (UMTS02) UA2.0
the upload and the OMC notified of availability
Indicates the maximum size of a trace file.
datafileUpLoadSize CoreSession 0 RNC <RNC>-<CallTrace>-<CoreSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for the upload and the Kb Integer 200 2048 512 14759 Full Call Trace (UMTS02) UA2.0
OMC notified of its availability.
Indicates the maximum size of CT files for this session.
datafileUploadSize FailureSession 0 RNC <RNC>-<CallTrace>-<FailureSession> partial expert_tuning Radio Call Trace Once this size is reached the opened CT file is closed and the OAM system Kb Integer 200 20480 1 8192 120498 UA09 Call Trace Developments LR13.1
notified of the availability of the CT file.
Indicates the maximum size of a trace file.
datafileUploadSize GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for
Kb Integer 200 2048 1024 14759 Full Call Trace (UMTS02) UA2.0
the upload and the OMC notified of availability
Indicates the maximum size of a trace file.
datafileUploadSize IuBcSession 0 RNC <RNC>-<ObjectTrace>-<IuBcSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for the upload and the Kb Integer 200 2048 512 30223 UA05 call trace enhancements UA5.0
OMC notified of its availability.
The trace file for this session is made available on a periodical value indicated by
datafileUploadSize IuCsSession 0 RNC <RNC>-<ObjectTrace>-<IuCsSession> partial system_restricted Radio Call Trace Kb Integer 200 2048 512 30223 UA05 call trace enhancements UA5.0
the option value in minute.
Indicates the maximum size of a trace file.
datafileUploadSize IuPsSession 0 RNC <RNC>-<ObjectTrace>-<IuPsSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for the upload and the Kb Integer 200 2048 512 30223 UA05 call trace enhancements UA5.0
OMC notified of its availability.
Indicates the maximum size of a trace file.
datafileUploadSize IuRSession 0 RNC <RNC>-<ObjectTrace>-<IuRSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for the upload and the Kb Integer 200 2048 512 30223 UA05 call trace enhancements UA5.0
OMC notified of its availability.
Indicates the maximum size of a trace file.
datafileUploadSize NeighbouringSession 0 RNC <RNC>-<CallTrace>-<NeighbouringSession> partial system_restricted Radio Call Trace Once this size reached the Trace file is made available for the upload and the Kb Integer 200 2048 512 30223 UA05 call trace enhancements UA5.0
OMC notified of its availability.
Indicates the maximum size of a trace file. Once this size reached the Trace file is
datafileUploadSize SessionMTc 0 RNC <RNC>-<CallTrace>-<SessionMTc> partial system_restricted Radio Call Trace Kb Integer 200 2048 512 33692 Subscriber Unit Air Status Measurement UA6.0
made available for the upload and the OMC notified of its availability.
Indicates the maximum size of a trace file. Once this size reached the Trace file is
External Document
datafileUploadSize SessionMTg 0 RNC <RNC>-<CallTrace>-<SessionMTg> partial system_restricted Radio Call Trace Page 11 Kb Integer 200 2048 512 33692 Subscriber Unit Air Status Measurement UA6.0 Alcatel-Lucent
made available for the upload and the OMC notified of its availability.
date TraceSession 0 OAM critical customer_setting Radio Call Trace the date of the session creation N.A. String 0 N.A. 0 none UA3.1
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This parameter determines the mapping of basic call types to DCH group call
type.
dchGroupCall BasicCallType 3 RNC <RadioAccessService>-<BasicCallType> none expert_tuning Radio Call Admission Control CAC N.A. Boolean N.A. 127550 Traffic Filtering in Cell Overload LR13.1
If the boolean is true, the corresponding basic call type (userLabel) is a part of
DCH group call type
dchMigrationActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS CEM Management Indicates whether the DCH migration procedure is activated or deactivated. Enumerate Disabled 111451 Inter-CEM Call migration (iBTS) LR Future
Power margin in percentage of DCH power that cannot be used for HSDPA.
dchPowerMargin HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio Power Management Power Control % Integer 0 100 20 27932 HSDPA Step1 UA4.2
Meaningless if isDchPowerMarginAdaptive = True.
This parameter provides values for DCH Power Margins (percentage) that should
be applied while calculating non-HSDPA power of a cell so as to consider
Radio measurement frequency increase : TX
dchPowerMarginList HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Power Control fluctuations due to inner loop power control of DCH channels. Integer 0 100 (0,0,0,0,0,0) 75998 UA7.1
power
This parameter is taken into account onl
This table provides different threshold values for total non-HSDPA power of a cell
relative to maximum power of that cell. These values will be used in dynamic
Radio measurement frequency increase : TX
dchPowerMarginThresholdList HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Power Control calculation of DCH Power Margin (see parameter dchPowerMarginList) dB Float -35 0 0,1 (-35.0,-35.0,-35.0,-35.0,-35.0) 75998 UA7.1
power
If dchPowerMarginThresholdL
This parameter provides activation/deactivation of the slow start algorithm when L2 improvements support (RLC & MAC-hs/e
dchSlowStartActivation RbCongestionControl 3 RNC <RadioAccessService>-<RbCongestionControl> none expert_tuning Transport Iub Congestion Control N.A. Boolean VRAI 34388 UA7.0
transport is over DCH. S/W for improved RLC)
<RadioAccessService>-<RbCongestionControl>- L2 improvements support (RLC & MAC-hs/e
dchSlowStartPeriod DchSlowStart 3 RNC none expert_tuning Transport Iub Congestion Control Slow-start period applicable only to DCH in Congestion Recovery mode ms Integer 0 20 10 20 34388 UA7.0
<DchSlowStart> S/W for improved RLC)
<RadioAccessService>-<RbCongestionControl>- Slow-start rate in percentage. Applicable only to DCH in Congestion Recovery L2 improvements support (RLC & MAC-hs/e
dchSlowStartRate DchSlowStart 3 RNC none expert_tuning Transport Iub Congestion Control % Integer 0 100 10 -50100 34388 UA7.0
<DchSlowStart> mode S/W for improved RLC)
<RadioAccessService>-<IrmPreemption>- [iRM Preemption
dedicatedResources01 IrmPreemptionExtendedParams 3 RNC none system_restricted Radio Load Management N.A. Integer 0 2147483647 2147483647 25075 iRM Pre-emption UA4.1
<IrmPreemptionExtendedParams> UA4][Others]
Default cell color for D-RNC Cells to be used in iRM-table.
defaultDlIrmCellColour NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Call Admission Control IRM For a set On-line, new value to be taken in account after Next iRM-table N.A. Enumerate Green 27741 CEM load in iRM UA5.0
evaluation
Selects the EDCH TTI type during call setup or Cell_FACH to Cell_DCH transition
<RadioAccessService>-<EdchRncConf>-
defaultEdchTtiType EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control when neither RSCP nor EcNo information is available in RACH reporting. N.A. Enumerate 10ms 120363 Smart phone EDCH resource usage. LR13.1
<EdchRncSmartphoneConf>
Meaningful only if psRabBadRadioSmartEdchResourceUsageActivation is True
defaultUlIrmCellColour NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Call Admission Control iRM This parameter provides the default UL cell color for cells managed by a DRNC N.A. Enumerate Green 27741 CEM load in iRM UA5.0
delayBetweenAmrRateControls RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Speech Call Management AMR ms Integer 500 60000 10 5000 27805 AMR mode change during the call UA5.0
This parameter defines the allowed MBMS delivery mode for all the cells of the
deliveryMode MbmsServiceArea 3 RNC none system_restricted Radio Broadcast Services MBMS N.A. Enumerate ptmOnly 31868 MBMS Broadcast UA7.1
MbmsServiceArea.
Indicates the delay to be set in the Activation time calculation. It is given in
deltaCfn ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none system_restricted Radio Channels & Bearers Activation Time N.A. Integer 0 255 130 27034 Update of RRM parameters during SRLR UA6.0
connection frame number of 10ms.
Delta CFN used for SRLR due to channel type switching of both HSDPA and
deltaCfnForEdchAndHsdpaChannelTypeSwitching EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Activation time N.A. Integer 0 255 150 29840 Commercial Hsupa introduction UA5.0
EDCH.
Delta CFN used for HSDPA+EDCH mobility when primary cell is changed and
deltaCfnForEdchAndHsdpaMobility EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Mobility N.A. Integer 0 255 150 29840 Commercial Hsupa introduction UA5.0
HSDPA+EDCH is following the primary cell.
Delta CFN used for SRLR due to channel type switching of Edch only. (HSDPA
deltaCfnForEdchChannelTypeSwitching EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Activation time configuration is not impacted in this case, otherwise use
N.A. Integer 0 255 150 29840 Commercial Hsupa introduction UA5.0
deltaCfnForEdchAndHsdpaChannelTypeSwitching)
Delta CFN used for RLC reconfiguration when done in stand-alone
deltaCfnForEdchRlcReconfiguration EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Activation time N.A. Integer 0 255 150 29840 Commercial Hsupa introduction UA5.0
(0 means asynchronous reconfiguration).
For KPI reason, this kind of SRLR may be optimizedIt is given in connection
deltaCfnForHsdpaChannelTypeSwitching HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none system_restricted Radio HSDPA Activation time N.A. Integer 0 255 80 27932 HSDPA Step1 UA4.2
frame number of 10ms
For KPI reason, this kind of SRLR may be optimizedIt is given in connection
deltaCfnForHsdpaMobility HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none system_restricted Radio HSDPA Activation time N.A. Integer 0 255 45 27932 HSDPA Step1 UA4.2
frame number of 10ms
For KPI reason, this kind of SRLR may be optimizedIt is given in connection
deltaCfnForHsdpaRLCReconfiguration HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none system_restricted Radio HSDPA Activation time N.A. Integer 0 255 0 27932 HSDPA Step1 UA4.2
frame number of 10ms
Indicates the delay to add to the CFN to determine the activation time of any radio-
deltaCfnForSynchronousReconfOverIubForFdpch HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none system_restricted Radio Channels & Bearers Activation Time SRLR when SRNC is CRNC (no Iur), when SRB are on HSPA. It is given in frames Integer 0 255 1 18 29810 Fractional DPCH - SRB over HSPA UA8.1
connection frame number of 10ms (10ms)
Indicates the delay to add to the CFN to determine the activation time of any radio-
deltaCfnForSynchronousReconfOverIurForFdpch NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none system_restricted Radio Channels & Bearers Activation Time SRLR when SRNC is not CRNC (Iur), when SRB are on HSPA. It is given in frames Integer 0 255 1 30 29810 Fractional DPCH - SRB over HSPA UA8.1
connection frame number of 10ms (10ms)
<RadioAccessService>-<ServiceInit>- KPI - Quick repeat of RRC Connection Setup
deltaCpichEcNoUsedQuickRepeat CallAccessPerformanceConf 3 RNC none expert_tuning Radio Accessibility RRC Quick Repeat The Ec/No delta used by the cNode to trigger the quick repeat dB Float -5 5 0,1 -5 Q00833055 UA4.1
<CallAccessPerformanceConf> message
<RadioAccessService>-<ServiceInit>- KPI - Quick repeat of RRC Connection Setup
deltaCpichRscpUsedQuickRepeat CallAccessPerformanceConf 3 RNC none system_restricted Radio Accessibility RRC Quick Repeat The RSCP delta used by the cNode to trigger the quick repeat dBm Integer -50 50 0 Q00833055 UA4.1
<CallAccessPerformanceConf> message
deltaDownServingCellNoHO EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio Power Management dB Float 0 1 0,001 0,02 33481 E-AGCH Power Control UA5.1
<RadioAccessService>-<DedicatedConf>-
deltaEdpcch CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH it specifies common E-DPCCH Power Offset. NBAP & SIB5 N.A. Integer 0 8 1 4 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
<RadioAccessService>-<EdpchInfoClass>- This parameter defines the E-DPCCH Power Offset.
deltaEdpcch EdpchParameters 3 RNC none system_restricted Radio HSUPA Power Control None Integer 0 8 4 33327 MAC-e Scheduler Evolutions UA6.0
<EdpchParameters> In UA05, this parameter was defined as Delta EDPCCH in EdchTfcConf.
TS 25.331 DeltaSir1
Delta in DL SIR target value to be set in the UE during the frame containing the
deltaSir1 UlUserService 3 RNC <RadioAccessService>-<UlUserService> none expert_tuning Radio Mobility Compressed Mode dB Float 0 3 0,1 0 30070 UA05 Parameter evolutions UA5.0
start of the first transmission gap in the transmission gap pattern (without
including the effect of the bit-rate increase)
TS 25.331 DeltaSirAfter1
deltaSirAfter1 UlUserService 3 RNC <RadioAccessService>-<UlUserService> none expert_tuning Radio Mobility Compressed Mode Delta in DL SIR target value to be set in the UE one frame after the frame dB Float 0 3 0,1 0 30070 UA05 Parameter evolutions UA5.0
containing the start of the first transmission gap in the transmission gap pattern.
Allows to define threshold for event B2 relatively to event B1 threshold.
<RadioAccessService>-<DlUserService>- Transmitted Code Power which will be sent to Node B for reporting of B2 will be iRM Scheduling upgrading based on radio
deltaThresholdTransCodePower MediumRbB2 3 RNC none expert_tuning Radio PS Call management iRM Scheduling - iur dB Float 0 56 0,5 N.A. 23332 UA4.1
<IrmSchedulingUpgrade>-<MediumRbB2> equal to : DHighRbB1.thresholdTransCodePower + conditions
mediumRbB2.deltaThresholdTransCodePower Reception of e
Defines the hysteresis time required to configure an EventB (B2) NBAP dedicated
<RadioAccessService>-<DlUserService>- measurement on the primary cell of a PS call handle by a DRNC. Allows to define iRM Scheduling upgrading based on radio
deltaTimeToTrigger MediumRbB2 3 RNC none expert_tuning Radio PS Call management iRM Scheduling - iur ms Integer 10 60000 10 500 23332 UA4.1
<IrmSchedulingUpgrade>-<MediumRbB2> Time to Trigger for event B2 relatively to event B1 Time to Trigger : conditions
TimeToTrigger_Intermediat
UE Periodic Measurements to Support
designateActivateEnabled Mme 3 RNC <RNC>-<Mme> none customer_init Radio Measurements Activation flag for designated mode of MME N.A. Boolean FAUX 34212 UA6.0
Performance Evaluation
the filtering coefficient to be applied to the measurements for designated mode
designateFilterCoefficient Mme 3 RNC <RNC>-<Mme> none customer_init Radio Measurements N.A. Enumerate 0 33692 Subscriber Unit Air Status Measurement UA6.0
MME. Defines the coefficient filter used by Node B.
Indicates whether the designated mode of MME measures the IntraFreq
designateIntraFreqMeasEnabled Mme 3 RNC <RNC>-<Mme> none customer_init Radio Measurements N.A. Boolean FAUX 33692 Subscriber Unit Air Status Measurement UA6.0
measurements
Indicates whether the designated mode of MME measures the Quality type
designateQualityMeasEnabled Mme 3 RNC <RNC>-<Mme> none customer_init Radio Measurements N.A. Boolean FAUX 33692 Subscriber Unit Air Status Measurement UA6.0
measurements
designateSocketDstIp SessionMTc 0 RNC <RNC>-<CallTrace>-<SessionMTc> partial customer_setting Transport IP The destination IP address of TCP/UDP Socket for designate mode N.A. IP4Address N.A. 33692 Subscriber Unit Air Status Measurement UA6.0
designateSocketDstPort SessionMTc 0 RNC <RNC>-<CallTrace>-<SessionMTc> partial customer_setting Transport IP The destination Port number of TCP/UDP Socket for designate mode N.A. Integer 0 65535 N.A. 33692 Subscriber Unit Air Status Measurement UA6.0
designateSocketSrcIp SessionMTc 0 RNC <RNC>-<CallTrace>-<SessionMTc> partial customer_setting Transport IP The source IP address of TCP/UDP Socket for designate mode N.A. IP4Address N.A. 33692 Subscriber Unit Air Status Measurement UA6.0
designateSocketSrcPort SessionMTc 0 RNC <RNC>-<CallTrace>-<SessionMTc> partial customer_setting Transport IP The source Port number of TCP/UDP Socket for designate mode N.A. Integer 0 65535 N.A. 33692 Subscriber Unit Air Status Measurement UA6.0
Indicates whether the designated mode of MME measures the UE Internal type
designateUeInternalMeasEnabled Mme 3 RNC <RNC>-<Mme> none customer_init Radio Measurements N.A. Boolean FAUX 33692 Subscriber Unit Air Status Measurement UA6.0
measurements
Indicates whether the designated mode of MME measures the UE Position type
designateUePositionMeasEnabled Mme 3 RNC <RNC>-<Mme> none customer_init Radio Measurements N.A. Boolean FAUX 33692 Subscriber Unit Air Status Measurement UA6.0
measurements
destinationIpAddress NatpTable 3 BTS <BTSEquipment>-<NATP>-<NatpTable> none customer_setting Radio Protocols N.A. IP4Address N.A. 33968 NAT-P enhancement UA6.0
This parameter enables/disables addition of detected set cells to the active set
on a per cell basis. If the value is set to automatic then this feature is enabled
detectedSetCellAddition FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility [SHO] N.A. Enumerate disabled 34231 Soft Handover developments UA6.0
when neighbour cells of active set cells have been cut of from the Cell_Info_list
due to it
IP address of device
IETF RFC 1208 (IP version 4
deviceIpAddress DeviceTable 3 BTS <BTSEquipment>-<SiteLan>-<DeviceTable> none customer_setting Radio Design N.A. IP4Address N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0
target IPV4 @ (internet address is a 32-bit address assigned to hosts using
TCP/IP. The synyactic representtaion for a 32-bit integer consists of four 8-bit
numbers written in base 10 with periods/dots
Man readable string representing the device type (significant only for TIL)
For RETA Device, the naming must be as follows :
deviceType DeviceTable 3 BTS <BTSEquipment>-<SiteLan>-<DeviceTable> none customer_setting Radio Design N.A. String 0 128 N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0
RETA XXXXXXX
RETA is the string "RETA " in uppercase followed by 1 space and
XXXXXXXX is the name of the RET manufacturer in
This parameter defines the time to live for a MAC-hs SDU starting from the
<RadioAccessService>-<DedicatedConf>-
instant of its arrival into an HSDPA Priority Queue.The Node B shall use this
discardTimer CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none system_restricted Radio HSDPA FACH ms Enumerate 200 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
information to discard out-of-data MAC-hs SDUs from the HSDPA Priority
<CommonPriorityQueue>
Queues. 168710
This parameter defines the time to live for a MAC-hs SDU starting from the
<RadioAccessService>-<DlRbSetConf>- instant of its arrival into an HSDPA Priority Queue.The Node B shall use this
discardTimer HsdpaParameters 3 RNC none expert_tuning Radio HSDPA Scheduler ms Enumerate 500 36247 Cs Voice over HSPA LR15.1
<HsdpaParameters> information to discard out-of-data MAC-hs SDUs from the HSDPA Priority
Queues.
This parameter defines the time to live for a MAC-hs SDU starting from the
instant of its arrival into an HSDPA Priority Queue.The Node B shall use this
discardTimer HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none expert_tuning Radio HSDPA Scheduler ms Enumerate 500 27932 HSDPA Step1 UA4.2
information to discard out-of-data MAC-hs SDUs from the HSDPA Priority
Queues.
This parameter defines the time to live for a MAC-hs SDU starting from the
<RadioAccessService>-<DedicatedConf>-
instant of its arrival into an HSDPA Priority Queue.The Node B shall use this
discardTimer PagingPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaPagingSysInfo>- none customer_tuning Radio Accessibility Paging ms Enumerate 500 120428 Enhanced PCH support for Qchat LR Future
information to discard out-of-data MAC-hs SDUs from the HSDPA Priority
<PagingPriorityQueue>
Queues.
Algorithm used for the downlink power allocation
The algo1 corresponds to a reserved power equal to MaxDlTxPower-
<RadioAccessService>-<DedicatedConf>- algo1deltatargetpower
dlAlgoSelector PowerConfClass 3 RNC none expert_tuning Radio Call Admission Control DL Power N.A. Enumerate algo1 27901 UA04.2 Parameters evolution UA4.2
<PowerConfClass> The algo2 corresponds to a reserved power equal to InitialDlTxPower+
algo2deltatargetpower
where InitialDlTxPower= p
This parameter defines the DL bandwidth available on Iub.
dlBandwidth IpTrafficShaping 0 BTS <BTSEquipment>-<IpRan>-<IpTrafficShaping> none system_restricted Transport IP This parameter applies both for Native IP Iub and Hybrid IP Iub . Kbits/s Integer 0 1000000 1 N.A. 27649 Native IP Iub support UA7.1
This parameter is not used in this release.
<RNC>-<LteNeighbour>- This parameter indicates the transmission bandwidth configuration (NRB). n6
dlBandwidth LteFrequencyAndBandwidth 3 RNC none customer_setting Radio Mobility LTE N.A. Enumerate N.A. 100894 UMTS to LTE Handover LR14.2
<LteFrequencyAndBandwidth> corresponds to 6 resource blocks, n15 to 15 resource blocks and so on.
<RadioAccessService>-<Imcta>- iMCTA Enhanced with HSPA Load – Blind
dlBlackLoadValue InterSystemHoConfClass 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] Value to be put into load value element for a Black cell in Dl. % Integer 0 100 10 89858 UA8.1
<InterSystemHoConfClass> HHO – Direct HHO on AO Upsize
<RadioAccessService>-<DedicatedConf>- This parameter defines the default DL CEM color to be used if CEM model
dlCEMColourDefaultValue NodeBConfClass 3 RNC none system_restricted Radio Call Admission Control IRM N.A. Enumerate Green 27741 CEM load in iRM UA5.0
<NodeBConfClass> reporting not valid
This parameter represents the LTE RAN Absolute Radio Frequency Channel
<RNC>-<LteNeighbour>-
dlEarfcn LteFrequencyAndBandwidth 3 RNC none customer_setting Radio Mobility LTE Number for downlink in the cell (DL centre carrier frequency), defined in TS N.A. Integer 0 65535 N.A. 100894 UMTS to LTE Handover LR14.2
<LteFrequencyAndBandwidth>
36.101
<RadioAccessService>-<DlRbSetConf>-
dlFpMode DlDynamicParameterPerDch 3 RNC none system_restricted Radio Protocols Iub / Iur Silent Mode This parameters defines what frame Protocol mode shall be used for DL. N.A. Enumerate N.A. 20542 Iub / Iur Silent Mode UA4.1
<DlDynamicParameterPerDch>
iMCRA - traffic balancing at RRC connection
UARFCN (UTRA Absolute Radio Frequency Channel Number of the downlink
dlFrequencyNumber FddCarrier 0 RNC <RadioAccessService>-<FddCarrier> none customer_init Radio Design Configuration N.A. Integer 0 16383 N.A. 89857 establishment with Programmable Actions UA8.1
frequency
Matrix
TS25.101
UARFCN (UTRA Absolute Radio Frequency Channel Number of the Down Link
dlFrequencyNumber FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial customer_init Radio Design N.A. Integer 0 16383 N.A. 0 none UA1
Frequency used by the cell: Nd = 5 * (Fdownlink MHz).
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 512, 537, 562
TS25.101
<RadioAccessService>-<Imcta>- UARFCN (UTRA Absolute Radio Frequency Channel Number of the Down Link intelligent Multi-Carrier Traffic Allocation
dlFrequencyNumber Frequency 3 RNC none customer_init Radio Mobility Configuration N.A. Integer 0 16383 <unset> 29415 UA5.0
<AlarmPriorityTableConfClass>-<Frequency> Frequency used by the cell: Nd = 5 * (Fdownlink MHz).
(iMCTA)
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 512, 537, 562
TS25.101
<RadioAccessService>-<Imcta>- UARFCN (UTRA Absolute Radio Frequency Channel Number of the Down Link intelligent Multi-Carrier Traffic Allocation
dlFrequencyNumber Frequency 3 RNC none customer_init Radio Mobility Configuration N.A. Integer 0 16383 <unset> 29415 UA5.0
<CacPriorityTableConfClass>-<Frequency> Frequency used by the cell: Nd = 5 * (Fdownlink MHz).
(iMCTA)
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 512, 537, 562
TS25.101
<RadioAccessService>-<Imcta>-
UARFCN (UTRA Absolute Radio Frequency Channel Number of the Down Link intelligent Multi-Carrier Traffic Allocation
dlFrequencyNumber Frequency 3 RNC <ServicePriorityGeneralTableConfClass>- none customer_init Radio Mobility Configuration N.A. Integer 0 16383 <unset> 29415 UA5.0
Frequency used by the cell: Nd = 5 * (Fdownlink MHz).
(iMCTA)
<Frequency>
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 512, 537, 562
TS25.101
<RadioAccessService>-<Imcta>-
UARFCN (UTRA Absolute Radio Frequency Channel Number of the Down Link intelligent Multi-Carrier Traffic Allocation
dlFrequencyNumber Frequency 3 RNC <ServicePriorityTableForHsdpaConfClass>- none customer_init Radio Mobility Configuration N.A. Integer 0 16383 <unset> 29415 UA5.0
Frequency used by the cell: Nd = 5 * (Fdownlink MHz).
(iMCTA)
<Frequency>
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 512, 537, 562
TS25.101
<RadioAccessService>-<Imcta>-
UARFCN (UTRA Absolute Radio Frequency Channel Number of the Down Link intelligent Multi-Carrier Traffic Allocation
dlFrequencyNumber Frequency 3 RNC <ServicePriorityTableForHsupaConfClass>- none customer_init Radio Mobility Configuration N.A. Integer 0 16383 <unset> 29415 UA5.0
Frequency used by the cell: Nd = 5 * (Fdownlink MHz).
(iMCTA)
<Frequency>
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 512, 537, 562
<RadioAccessService>-
UARFCN (UTRA Absolute Radio Frequency Channel Number of the downlink
dlFrequencyNumber FrequencyAllocation 3 RNC <RrcRedirectionConfClass>- none customer_init Radio Design Configuration N.A. Integer 0 16383 1 N.A. 75069 iMCTA improvement UA7.0
frequency
<FrequencyAllocation>
UARFCN (UTRA Absolute Radio Frequency Channel Number of the the Down link
frequency used by the cell: Nd = 5 * (Fdownlink MHz)
dlFrequencyNumber RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_init Radio Design N.A. Integer 0 16383 N.A. 23076 RNC 2500 UA6.0
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 512, 537, 562, 587, 61
dlFrequencyNumber RfCarrier 0 BTS <BTSEquipment>-<RfCarrier> critical customer_init Radio Design N.A. Integer 0 16383 N.A. 34159 STSR3 Node-B configuration UA6.0
Downlink Frequency used by the Cell. The dlFrequencyNumber attribute is a value
<RadioAccessService>-<SoftCongestion>-
dlFrequencyNumber SoftCongestionFrequency 3 RNC none customer_init Radio Load Management Soft Congestion between 0.. 16383, corresponding to 5 7 * FDl frequency in MHz. (cf TS 25.104, N.A. Integer 0 16383 <unset> 119026 Soft Congestion UA8.1
<SoftCongestionFrequency>
section 5.4).
<RadioAccessService>-<Imcta>- Unified RRM Step 2 : Cell Load information
dlGreenLoadValue InterSystemHoConfClass 3 RNC none expert_tuning Radio Mobility [HHO][3G2G] Value to be put into load value element for a Green cell in Dl % Integer 0 100 0 33326 UA6.0
<InterSystemHoConfClass> exchange between 2G and 3G
dlIrmTableConfClassId DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none customer_tuning Radio Call Admission Control IRM Reference associated to the identity of the dlIrmTableConfClass selected N.A. ServiceLink N.A. 22841 iRM Cell colour calculation UA3.0
Indicates the maximum possible DL delay for CS voice frames. Configuration to
dlMaxCsDelay CsHspaDejitter 3 RNC <RadioAccessService>-<CsHspaDejitter> none system_restricted Radio Speech Call Management Voice over HSPA ms Integer 20 200 10 40 36247 Cs Voice over HSPA LR15.1
be sent in the RRC messages in the RAB info for set-up
dlOutOfOrderSduDeliveryMethod DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Unused not used Method used for delivery of out-of-order RLC SDUs. N.A. Enumerate InSequence 28042 Throughput KPI improvement LR Future
Configuration of the list of PDU sizes to be used for a VoIP RAB.
dlPduSizeListFirstRb DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Speech Call Management VoIP bits Integer 0 5000 1 <Null> 36247 Cs Voice over HSPA LR15.1
This list shall not be present for non VoIP RbSet.
<RNC>-<NodeB>-<FDDCell>- Defines the window size when Limited Power Increase is used;
dlPowerAveragingWindowSize LimitedPowerIncrease 2 RNC partial system_restricted Radio Power Management N.A. Integer 1 60 30 28016 3GPP compliant NBAP (multi-vendor) UA5.0
<LimitedPowerIncrease> Unit is inner loop power adjustments
defines the upper limit of each screening for the user perceived throughput of DL (96, 128, 160, 192, 224, 256, 288, 320,
dlR99Thd PmUserTpConf 3 RNC <RadioAccessService>-<PmUserTpConf> none customer_tuning Radio Counters Kbits/s Integer 1 384 1 34696 User Perceived Throughput Counters UA7.0
R99 PS interactive/background traffic 352)
<RadioAccessService>-<DlRbSetConf>-
dlRateMatchingAttributeList DlDynamicParameterPerDch 3 RNC none system_restricted Radio Channels & Bearers Configuration DownLink Rate matching attribute. N.A. Integer 1 256 N.A. 18717 AMR Rate Adaptation UA5.0
<DlDynamicParameterPerDch>
dlRbPduSizeList DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Channels & Bearers Configuration UL RLC PDU size. For each RB of the RBSet. bits Integer 0 5000 N.A. 29813 UE Cat 9 & 10 Support UA5.0
The downsize threshold for Rate Adaptation of the source Radio Bearer must be
lower than or equal
RB Rate Adaptation - to the upsize threshold of the target Radio Bearer.
RB adaptation based on traffic: DL and UL
dlRbRateAdaptationDownsizeThreshold DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none expert_tuning Radio PS Call management Kbits/s Integer 0 2048 N.A. 27330 UA4.2
throughput For example:
with start @64kbit/s
dlRbRateAdaptationDownsizeThreshold_128k :54 <
dlRbRateAdaptationUpsizeThreshold_64k: 5
Note that the multistage DL upsize can only applies for the DL since it is based on
RB adaptation based on traffic: DL and UL
dlRbRateAdaptationUpsizeAlgorithm RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio PS Call management RB Rate Adaptation the RLC-SDU awaiting for transmission, which is not possible in uplink (RNC is N.A. Enumerate multiStageUpsize 27330 UA4.2
with start @64kbit/s
the RLC receiver in uplink).
The downsize threshold for Rate Adaptation of the source Radio Bearer must be
lower than or equal
RB Rate Adaptation - to the upsize threshold of the target Radio Bearer.
RB adaptation based on traffic: DL and UL
dlRbRateAdaptationUpsizeThreshold DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none expert_tuning Radio PS Call management Kbits/s Integer 0 2048 N.A. 27330 UA4.2
throughput For example:
with start @64kbit/s
dlRbRateAdaptationDownsizeThreshold_128k :54 <
dlRbRateAdaptationUpsizeThreshold_64k: 5
This parameter clarifies the identity of the eligible interactive/background downlink
<RadioAccessService>-<DedicatedConf>- RB Selection based on UE radio conditions
dlRbSetConfId IrmOnRlConditionParameters 3 RNC none expert_tuning Radio Call Admission Control iRM RadioLink radio bearer on which the algorithm (based on -cpichEc/N0 and cpichRSCP N.A. ServiceLink N.A. 23304 UA3.0
<CacConfClass>-<IrmOnRlConditionParameters> evaluation
thresholds criteria) of IRM on radio link condition is applicable.
<RadioAccessService>-<Imcta>- Unified RRM Step 2 : Cell Load information
dlRedLoadValue InterSystemHoConfClass 3 RNC none expert_tuning Radio Mobility [HHO][3G2G] Value to be put into load value element for a Red cell in Dl % Integer 0 100 0 33326 UA6.0
<InterSystemHoConfClass> exchange between 2G and 3G
TS 25.433
The parameter (DL power IE) indicates a power level relative to the primary
CPICH power.
dlReferencePower DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Power Management Power Balancing
dB Float -35 15 0,1 N.A. 20519 Power Balancing UA4.1
Warning: the modification of this parameter involves the knowledge of the Power
Adjustment algorithm which is a function of the following parameters:
-
Downlink radio link controller queue size. It configures the number of incoming RB adaptation based on traffic: DL and UL
dlRlcQueueSize DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none expert_tuning Radio Protocols RLC Buffer N.A. Integer 1 128 N.A. 27330 UA4.2
SDUs that RLC can hold in order to wait for transmission. with start @64kbit/s
Downlink radio link controller queue size. It configures the number of incoming
dlRlcQueueSize FachClass 0 RNC <RadioAccessService>-<FachClass> critical system_restricted Radio Protocols RLC Buffer N.A. Integer 1 128 N.A. 16717 RRC States Management UA3.0
SDUs that RLC can hold in order to wait for transmission.
This parameter defines the downlink RLC Queue Size for MTCH in number of
dlRlcQueueSize MbmsRlcUMode 3 RNC none system_restricted Radio Broadcast Services MBMS N.A. Integer 1 128 64 31868 MBMS Broadcast UA7.1
SDUs
Downlink radio link controller queue size. It configures the number of incoming
dlRlcQueueSize PCH 0 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Protocols RLC Buffer N.A. Integer 1 128 32 16717 RRC States Management UA3.0
SDUs that RLC can hold in order to wait for transmission.
dlRlcQueueSizeForUeCat HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio Protocols RLC Buffer Define the downlink RLC Queue Size for each UE category in number of SDUs N.A. Integer 1 2048 -1,28128E+71 81204 Dual Cell HSDPA operation UA7.1.2
<RadioAccessService>-<RlcPerformanceConf>-
dlSmallSduSizeLimit OutOfOrderSduDeliveryConf 3 RNC none system_restricted Radio Unused not used Small RLC SDU size limit for downlink direction, in bytes N.A. Integer 0 400 40 28042 Throughput KPI improvement LR Future
<OutOfOrderSduDeliveryConf>
Indicates the LOG10 of SRB BLER derived from BLER quality target which must
be hit for a specific Signaling Downlink radio bearer.If dlBlerQuality is not defined
dlSrbErrorMatching DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Channels & Bearers Activation time N.A. Float -3 4 0,01 0,7 27034 Update of RRM parameters during SRLR UA6.0
then a default value 0 replaces dlBlerQuality.The SRB BLER max value is limited
to the value
<RNC>-<NodeB>-<FDDCell>-
This parameter defines the time interval to wait before sending a retry DL SYNC
dlSyncRetryPeriod CchDlTimingAdjustmentParams 2 RNC <MbmsResourceClass2>- partial system_restricted Radio Synchronisation Iub Synchronisation ms Integer 10 1000 100 31868 MBMS Broadcast UA7.1
frame for initial synchronization of a radio link
<CchDlTimingAdjustmentParams>
Time interval to wait before sending a retry DL SYNC frame for initial
dlSyncRetryPeriod DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation ms Integer 10 1000 100 0 none UA2.1
synchronization of a radio link.
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>- Time interval to wait before sending a retry DL SYNC frame for initial
dlSyncRetryPeriod FACH 2 RNC partial system_restricted Radio Synchronisation Iub Synchronisation ms Integer 10 1000 100 16717 RRC States Management UA3.0
<FACH> synchronization of a radio link.
Time interval to wait before sending a retry DL SYNC frame for initial
dlSyncRetryPeriod PCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Synchronisation Iub Synchronisation ms Integer 10 1000 100 16717 RRC States Management UA3.0
synchronization of a radio link.
TS 25.214
The DL TPC pattern01 count IE contains the value of the parameter n, which is
dlTpcPattern01Count FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial system_restricted Radio Power Management Power Control N.A. Integer 0 30 14 0 none UA2.1
used for determining the DL TPC pattern on Radio Links marked with "First RLS"
by the first RLS indicator IE before UL synchronisation is achieved.
it specifies FDD TPC DL Step Size for common E-DCH transmission.
<RadioAccessService>-<DedicatedConf>-
NBAP.
dlTpcStepSize CommonEdchFdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH dB Enumerate 1 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchFdpchInfo>
<RadioAccessService>-<DedicatedConf>- TS 25.433 FDD TPC Downlink step size
dlTpcStepSize DlInnerLoopConf 3 RNC none system_restricted Radio Power Management Power Control dB Enumerate 1 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<DlInnerLoopConf> TPC downlink step size : step size for the dowlink power adjustment
<RadioAccessService>-<DedicatedConf>- Filter coefficient for NBAP dedicated measurements. The formula for the filter is
dlTxcpFilter DlRncRabModMeas 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio Power Management Measurements given in 25.433 8.3.8.2. This attributes is only applicable to Streaming traffic N.A. Enumerate 17 34226 RNC initiated RAB modification UA6.0
<DlRncRabModMeas> class.
Estimated downlink power reserved for a new incoming HSDPA service. It
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>- represents a power relative to P-CPICH power. A bit rate value is associated to
dlTxPowerEstimation 3 RNC none expert_tuning Radio HSDPA Resource Sharing dB Float -35 15 0,1 (-5.0, -3.0, -2.0, -2.0,-2.0, -2.0, -2.0) 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
lass <HsxpaR99ResourcesSharingCellClass> each element in the list as follow: 0=64kbps; 1=128kbps; 2=256kbps;
3=384kbps; 4=1000kbps; 5=2000kbps;
The parameter is used to calculate the amount of power to reserve when HS-
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>- DSCH is configured with MIMO for given reference bitrates. It represents a
dlTxPowerEstimationMimo 3 RNC none system_restricted Radio HSDPA Resource Sharing dB Float -35 15 0,1 (-5.0, -3.0, -2.0, -2.0, -2.0, -2.0, -2.0) 83984 2*2 MIMO UA8.1
lass <HsxpaR99ResourcesSharingCellClass> power relative to P-CPICH power. A bit rate value is associated to each element
in the list as follow: 0=6
Identifier of the associated dlUserService
DL Access Stratum Configuration Id
<RadioAccessService>-<ServiceInit>- other name: dlAsConfId
dlUserServiceId UserServices 3 RNC none customer_tuning Radio Accessibility Call establishment N.A. ServiceLink N.A. 0 none UA1.0
<UserServices>
Notice the dlUserServiceId and UlUserServiceId must be coherent for the same
Establishement Cause. So it is recommended to reduce as much as possible
<RadioAccessService>-<Imcta>- Unified RRM Step 2 : Cell Load information
dlYellowLoadValue InterSystemHoConfClass 3 RNC none expert_tuning Radio Mobility [HHO][3G2G] Value to be put into load value element for a Yellow cell in Dl % Integer 0 100 0 33326 UA6.0
<InterSystemHoConfClass> exchange between 2G and 3G
dnsServer DeviceTable 3 BTS <BTSEquipment>-<SiteLan>-<DeviceTable> none customer_setting Radio Design IP address of DNS server, meaningful only if “ManagerSpec = FQDN” N.A. IP4Address N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0
<RadioAccessService>-<OverloadInfo>- Control for Pch Downsize; 0 = no reject, 1 = all Pch Downsize are rejected, X>1
downsizeToPchBypassRate Overload 3 RNC none system_restricted Radio Load Management Overload Control N.A. Integer 0 5 2 33565 UA06 Always-On developments UA6.0
<RNCNodeOverloadControl>-<Overload> means 1/X Pch Downsize rejected
TS 25.331 DPCCH Power offset
<RadioAccessService>-<DedicatedConf>-
dpcchPowerOffset UlInnerLoopConf 3 RNC none expert_tuning Radio Power Management this quantity corrected by CPICH RSCP corresponds to the initial power used by dB Integer -164 -6 2 -80 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<UlInnerLoopConf>
the UE for the initial transmission of the DPCCH.
TS 25.331 DPC MODE
<RadioAccessService>-<DedicatedConf>- DPC mode (RRC ie type) is used for the downlink inner loop power control.
dpcMode DlInnerLoopConf 3 RNC none system_restricted Radio Power Management Power Control N.A. Enumerate singleTpc 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<DlInnerLoopConf> "Single TPC"bis DPC_Mode=0 and " TPC triplet in soft" is DPC_Mode=1 in TS
25.214
<RadioAccessService>-<DedicatedConf>- Service Based Mobility parameters
dropPrimaryRlDelta SoftHoConf 3 RNC none customer_tuning Radio Mobility [SHO][Periodical] this parameter defines the threshold used to drop a priamry radio link dB Float 0 24 0,5 2 33546 UA6.0
<HoConfClass>-<UsHoConf>-<SoftHoConf> enhancement
This parameter specifies the number of CTCH block sets in DRX Period
The value of this parameter depends on isPeriodicScheduleMessageActivated (if
drxPeriodSize CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial customer_tuning Radio Broadcast Services CBS N.A. Integer 3 256 1 128 134302 CBS enhancements for UE battery savings LR13.1
true the value should be restricted to the value allowed for P parameter defined in
SIB5 (25.331), if false
External Document Page 13 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
DSCP (Differentiated Services Code Point) level 3 QoS used for CT UDP traffic
from LRCE to TCE.
dscp CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace This parameter is significant only for LRCE / not significant for RNC 9370. N.A. Enumerate default 162427 LRCE 3G Call Trace (End-to-End) LR Future
For LRCE this parameter is significant only if parameter
isCallTraceDataUdpStream
<RNC>-<PsCoreNetworkAccess>-
dscp DscpPerThp 3 RNC <DscpPerTrafficClass>-<DscpPerArp>- none expert_tuning Radio PS Call management QoS Differentiation N.A. Integer 0 63 N.A. 34137 Integrated SMLC UA6.0
<DscpPerThp>
This parameter defines the DSCP (level 3) QoS to be used by the Node B for all
(Default,AF41,EF,AF41,AF41,Default,D
UL traffic on IP for which it is not possible to rely on signaling from RNC. The
dscp IpRan 3 BTS <BTSEquipment>-<IpRan> none expert_tuning Radio PS Call management QoS Differentiation N.A. Enumerate efault,Default,Default,Default,Default,Def 27649 Native IP Iub support UA7.1
DSCP for the rest of the UL traffic on IP is deduced from TNL QoS IE given by
ault)
RNC in NBAP.This
list of dscp values forming the DSCP QoS Class, i.e. corresponding to the list of
dscpList UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none customer_setting Transport Unused Enumerate EF 89716 UDP multiplexing on Iub (iBTS) Cancelled
DSCP values mapped in the peer RNC component (UdpMuxRnc)
list of dscp values forming the DSCP QoS Class, i.e. corresponding to the list of
dscpList UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused Enumerate EF 89716 UDP multiplexing on Iub (iBTS) Cancelled
DSCP values mapped in the peer RNC component (UdpMuxProfile)
This parameter defines the mapping table from DSCP (level 3) QoS class (first 3
bits of the 6 bits DSCP) to Emission Priority (EP) to be used by the Node B for
UL traffic on IP.
dscpToEP IpTrafficShaping 0 BTS <BTSEquipment>-<IpRan>-<IpTrafficShaping> none customer_tuning Transport IP N.A. Integer 0 7 1 (0,0,0,0,0,0,0,0) 27649 Native IP Iub support UA7.1
This parameter applies both for Native IP Iub and Hybrid IP Iub.
Index 0: DS
This parameter defines the mapping table from DSCP (level 3) QoS class (first 3
bits of the 6 bits DSCP) to p-bit (level 2 QoS) to be used by the Node B for UL
dscpToPBit IpRan 3 BTS <BTSEquipment>-<IpRan> none customer_tuning Transport IP traffic on IP. N.A. Integer 0 7 1 N.A. 75784 Ethernet QoS handling in UTRAN UA7.1
This parameter applies both for Native IP Iub and Hybrid IP Iub cases.
Index 0:
This parameter defines whether Dual Cell operation can be configured or not.This
dualCellActivation HsdpaConf 0 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_setting Radio HSDPA Dual cell N.A. Boolean FAUX 81204 Dual Cell HSDPA operation UA7.1.2
parameter does not apply to alpha-CEM/iCEM.
This parameter represents the Maximum number of DC-HSDPA users (logical
channel) allowed per XCEM board. Each DC-HSDPA user takes two resources,
dualCellHsdpaMaxNumberUserXcem BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSDPA Dual cell N.A. Integer 1 42 1 15 81204 Dual Cell HSDPA operation UA7.1.2
e.g. if value 15 is given, actually 30 resources will be taken from Xcem board and
thus, number of legacy HSDP
This parameter represents the Maximum number of DC-HSDPA and MIMO users
combined (logical channel) allowed per bCEM board. Each DC-HSDPA or MIMO
dualCellHsdpaMimoMaxNumberUserBcem BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSDPA Dual cell N.A. Integer 1 128 1 30 109344 bCEM SW introduction in WCDMA LR Future
user takes two resources, e.g. if value 30 is given, actually 60 resources will be
taken from BCEM board and t
This parameter represents the Maximum number of DC-HSDPA and MIMO users
combined (logical channel) allowed per eCEM board. Each DC-HSDPA or MIMO
dualCellHsdpaMimoMaxNumberUserEcem BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSDPA Dual cell N.A. Integer 1 64 1 15 81204 Dual Cell HSDPA operation UA7.1.2
user takes two resources, e.g. if value 15 is given, actually 30 resources will be
taken from ECEM board and t
This parameter indicates the cell with the adjacent frequency to the anchor cell. It
dualCellId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSDPA Dual cell N.A. Integer 0 65535 <Null> 81204 Dual Cell HSDPA operation UA7.1.2
is used to identify the Secondary Cell supporting the HSDPA Dual Cell operation.
This parameter configures the role of the BtsCell in dual cell when
dualCellActivation is activated.
dualCellServingMode HsdpaConf 0 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> critical customer_tuning Radio HSDPA Power Management N.A. Enumerate primaryOrSecondary 111362 Dynamic PA Power Pooling LR Future
primaryOrSecondary: the cell can be primary or secondary serving cell.
secondaryOnly: the Cell can only be secondary serving Cell in Dual Cell
This parameter enables/disables the support of Dual Cell with MIMO for the cell
dualCellWithMimoActivation HsdpaConf 0 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSDPA Dual cell (i.e. DC+Mimo cell capability) N.A. Boolean false 111582 Dual Carrier with MIMO up to 84Mbps LR Future
Note: This parameter does not apply if HSDPA is allocated on iCEM or xCEM
The parameter represents the maximum number of DualCell with MIMO users
allowed per bCEM board.
dualCellWithMimoMaxNumberUserBcem BTSEquipment 3 BTS <BTSEquipment> none customer_tuning Radio HSDPA Dual cell Each Dual Cell with MIMO user takes resources equivalent to 4 HSDPA N.A. Integer 1 64 1 2 111582 Dual Carrier with MIMO up to 84Mbps LR Future
resources.
The aim of this parameter is to allow the operator to limit the maximum number
The parameter represents the maximum number of DualCell with MIMO users
allowed per eCEM board.
dualCellWithMimoMaxNumberUserEcem BTSEquipment 3 BTS <BTSEquipment> none customer_tuning Radio HSDPA Dual cell Each Dual Cell with MIMO user takes resources equivalent to 4 HSDPA N.A. Integer 1 32 1 2 111582 Dual Carrier with MIMO up to 84Mbps LR Future
resources.
The aim of this parameter is to allow the operator to limit the maximum number
The parameter defines whether the cell (sector-carrier) is configured with two
dualPaUsage BTSCell 0 BTS <BTSEquipment>-<BTSCell> critical system_restricted Radio HSDPA Dual cell N.A. Enumerate none 83984 2*2 MIMO UA8.1
PAs.
This parameter defines the offset between UL and DL path loss applied for path
duplexOffsetForEagchPowerControl EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio HSUPA loss estimation for E-AGCH power control in Node B. (UL path loss is lower than dB Float -20 0 0,1 -1,4 33481 E-AGCH Power Control UA5.1
the DL path loss). This offset depends on the UMTS operating band.
Duration of the session.
duration AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial customer_setting Radio Call Trace min Integer 0 65535 0 14759 Full Call Trace (UMTS02) UA2.0
0 means infinite.
Duration of the session.
duration CellSession 0 RNC <RNC>-<ObjectTrace>-<CellSession> partial customer_setting Radio Call Trace min Integer 0 65535 0 14759 Full Call Trace (UMTS02) UA2.0
0 means infinite.
Duration of the session.
duration CoreSession 0 RNC <RNC>-<CallTrace>-<CoreSession> partial customer_setting Radio Call Trace min Integer 0 65535 0 14759 Full Call Trace (UMTS02) UA2.0
0 means infinite.
Duration of the session.
duration FailureSession 0 RNC <RNC>-<CallTrace>-<FailureSession> partial expert_tuning Radio Call Trace min Integer 0 65535 1 0 120498 UA09 Call Trace Developments LR13.1
The value 0 means an infinite duration.
Duration of the session.
duration GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> partial customer_setting Radio Call Trace min Integer 0 65535 0 14759 Full Call Trace (UMTS02) UA2.0
0 means infinite.
duration IuBcSession 0 RNC <RNC>-<ObjectTrace>-<IuBcSession> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 30223 UA05 call trace enhancements UA5.0
duration IuCsSession 0 RNC <RNC>-<ObjectTrace>-<IuCsSession> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 30223 UA05 call trace enhancements UA5.0
duration IuPsSession 0 RNC <RNC>-<ObjectTrace>-<IuPsSession> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 30223 UA05 call trace enhancements UA5.0
duration IuRSession 0 RNC <RNC>-<ObjectTrace>-<IuRSession> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 30223 UA05 call trace enhancements UA5.0
duration NeighbouringSession 0 RNC <RNC>-<CallTrace>-<NeighbouringSession> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 30223 UA05 call trace enhancements UA5.0
Analysis and saving function for abnotmal drop
duration RNCSession 0 RNC <RNC>-<ObjectTrace>-<RNCSession> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 30235 UA4.3K
call
duration RtPerfScanner 3 RNC <RNC>-<RtPerfScanner> none customer_tuning Radio Counters Duration of Real Time Observation min Integer 5 1440 5 60 25101 Real Time Rnc Counters UA7.1
duration SessionMTc 0 RNC <RNC>-<CallTrace>-<SessionMTc> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 33692 Subscriber Unit Air Status Measurement UA6.0
duration SessionMTg 0 RNC <RNC>-<CallTrace>-<SessionMTg> partial customer_setting Radio Call Trace duration of the session, 0 = unlimited session. min Integer 0 65535 0 33692 Subscriber Unit Air Status Measurement UA6.0
Duration of the activation of the session, (0 minutes means infinite for V3 RNCs
duration TraceSession 0 OAM critical customer_setting Radio Call Trace min Integer 0 65535 N.A. 0 none UA3.1
65535 means infinite for V2 RNCs).
This parameter represents the target queue size that the mac-C would like to
keep for each DxCH channel.
dxChQueueSize FachClass 0 RNC <RadioAccessService>-<FachClass> critical system_restricted Radio Channels & Bearers FACH N.A. Integer 0 255 N.A. 16717 RRC States Management UA3.0
DxCH is a short-cut for DCCH/DTCH that mapped over FACH.
In unit of MAC SDUs.
dynamicPersistenceLevel used by the BTS in the SIB 7 as defined in 3GPP TS
dynamicPersistenceLevel BTSCell 3 BTS <BTSEquipment>-<BTSCell> none expert_tuning Radio Power Management RACH N.A. Integer 1 8 1 34303 WQA Detected cell identification UA6.0
25.331.
dynamicPersistenceLevel used by the RNC in the SIB 7, when this one is sent to
CS fallback enhancement from LTE to
dynamicPersistenceLevel RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none customer_tuning Radio Power Management RACH another RAN through CN by RIM procedures N.A. Integer 1 8 11 115109 UA8.1
UMTS:enhanced Redirection
Significant when isRimForUtraSiFromLteActivated = TRUE
Additionnal power for E-AGCH, E-RGCH and E-HICH, to be added to HSDPA
<RadioAccessService>-<DedicatedConf>- powers in order to reserve power in the NodeB in the Physical Shared Channel
eagchErgchEhichTotalPower EdchCellClass 3 RNC none expert_tuning Radio HSUPA Power Control dBm Float 0 50 0,1 10 29840 Commercial Hsupa introduction UA5.0
<EdchCellClass> Reconfiguration NBAP message for the field :
HS-PDSCH, HS-SCCH,E-AGCH, E-RGCH and E-HICH Total Power.
This table defines the different DL path loss thresholds applied for E-AGCH
eagchPathLossValue EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio HSUPA dB Float 100 200 0,1 (135.0, 130.0, 125.0, 120.0, 115.0) 33481 E-AGCH Power Control UA5.1
power control in Node B (see parameter eagchPowerValue).
The power level relative to primary CPICH of the cell, devoted to one e-AGCH
eagchPower EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA Power Control dB Float -35 15 0,1 -12,5 29840 Commercial Hsupa introduction UA5.0
channel is indicated here when the fixed mode is chosen
eagchPowerControlActivated EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Power Control Enable/disable E-AGCH power control feature at RNC level N.A. Boolean VRAI 33481 E-AGCH Power Control UA6.0
This parameter indicates how to perform the power control on the eAGCH
channel
eagchPowerControlMode EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio HSUPA Power Control N.A. Enumerate fixed 29840 Commercial Hsupa introduction UA5.0
Note: fixedPowerLevel is the only value allowed in this release
eagchPowerControlModeXcem EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none customer_setting Radio HSUPA Power Control Flag enabling Power Control for all E-DCH DL channels, at cell level N.A. Enumerate dynamic 33481 E-AGCH Power Control UA6.0
<RadioAccessService>-<DedicatedConf>- The E-AGCH Power Offset IE indicates the Power offset relative to the pilot bits
eagchPowerOffset EdchCellClass 3 RNC none system_restricted Radio HSUPA Power Control dB Float -32 31,75 0,25 4 29840 Commercial Hsupa introduction UA5.0
<EdchCellClass> on the DL DPCCH except when F-DPCH is configured.
eagchPowerOffset EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA dB Float -45 65 0,1 10 33481 E-AGCH Power Control UA5.1
The E-AGCH Power Offset indicates the Power Offset relative to the pilot bits on
<RadioAccessService>-<DedicatedConf>-
eagchPowerOffsetEdchTti2ms EdchCellClass 3 RNC none customer_tuning Radio HSUPA Power Control the DL DPCCH when E-DCH TTI is 2msec (excepted when F-DPCH is dB Float -32 31,75 0,25 4 33481 E-AGCH Power Control UA5.1
<EdchCellClass>
configured).
This table defines the different E-AGCH transmission power values (relative to
eagchPowerValue EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio HSUPA CPICH), according to the DL path loss estimated by the Node B, applied for E- dB Float -28 28 0,1 (-12.5,-12.5,-12.5,-12.5,-12.5,-12.5) 33481 E-AGCH Power Control UA5.1
AGCH power control in Node B.
ebbuAllocationPriority BTSEquipment 3 BTS <BTSEquipment> none system_restricted BTS CEM Management Configuration N.A. Enumerate lowerAllHbbu 29840 Commercial Hsupa introduction UA5.0
Indicates that UE is in good/bad radio conditions for TTI selection based on
reported EcNo - estimated UL noise rise of the cell.
ecnoNRiseThresholdForTtiSelection EdchResource 3 RNC <RNC>-<NodeB>-<FDDCell>-<EdchResource> none expert_tuning Radio HSUPA Congestion Control Meaningful only if psRabBadRadioSmartEdchResourceUsageActivation is True dB Float -24.0 0.0 0.1 -24.0 120363 Smart phone EDCH resource usage. LR13.1
Threshold in terms of number of consecutive received MAC-es PDUs that did not
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>-
edchNrOfConsecutiveZeroHarqReTxThreshold 3 RNC none system_restricted Radio HSUPA Power Control require any HARQ retransmission. This threshold is used to trigger the use of fast N.A. Integer 0 1024 200 34249 E-DCH Adaptative HARQ Control UA6.0
ms <DynamicParameterForEdchTti10ms>
SIR target decrease in the related E-DCH outer loop power control function
Threshold in terms of number of consecutive received MAC-es PDUs that did not
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>-
edchNrOfConsecutiveZeroHarqReTxThreshold 3 RNC none system_restricted Radio HSUPA Power Control require any HARQ retransmission. This threshold is used to trigger the use of fast N.A. Integer 0 1024 200 34249 E-DCH Adaptative HARQ Control UA6.0
s <DynamicParameterForEdchTti2ms>
SIR target decrease in the related E-DCH outer loop power control function
edchNumberUserCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_init BTS Capacity Licensing Maximum number of EDCH users that the BTS is allowed to setup. N.A. Mixed 0 65534 infinite 16746 Capacity licensing UA6.0
edchNumCommonRgPerCode EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA Mobility N.A. Integer 0 4 2 32076 E-DCH Macro Diversity Support UA6.0
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>-
edchOlpcHfiRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 33307 e-DCH Link Quality Control UA07.1
ms <DynamicParameterForEdchTti10ms>
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>-
edchOlpcHfiRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 34249 E-DCH Adaptative HARQ Control UA6.0
ms <DynamicParameterForEdchTti10ms>
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>-
edchOlpcHfiRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 33307 e-DCH Link Quality Control UA07.1
s <DynamicParameterForEdchTti2ms>
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>-
edchOlpcHfiRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 34249 E-DCH Adaptative HARQ Control UA6.0
s <DynamicParameterForEdchTti2ms>
Defines the value of UL SIR Target used by EDCH OLPC as a result of fast
edchOlpcInactivitySirDecreaseLimit EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio HSUPA Power Control decrease in SIR Target in one step due to simultaneous inactivity on all DCH / dB Float 0.0 10.0 0.1 3.0 121085 UL Power saving with E-DCH OLPC UA08.1
EDCH MAC-d flows exceeding the time threshold.
Defines the time period of simultaneous data inactivity on all configured DCH /
edchOlpcInactivityTimeThreshold EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio HSUPA Power Control s Float 0.00 30.00 0.01 0.50 121085 UL Power saving with E-DCH OLPC UA08.1
EDCH MAC-d flows required to trigger fast decrease of SIR Target.
edchOlpcSamplingPeriodTti10ms EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Power Control ms Integer 0 500 10 N.A. 29840 Commercial Hsupa introduction UA5.0
edchOlpcSamplingPeriodTti2ms EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Power Control ms Integer 0 500 10 N.A. 29840 Commercial Hsupa introduction UA5.0
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>-
edchOlpcServingRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 33307 e-DCH Link Quality Control UA07.1
ms <DynamicParameterForEdchTti10ms>
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>-
edchOlpcServingRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 34249 E-DCH Adaptative HARQ Control UA6.0
ms <DynamicParameterForEdchTti10ms>
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>-
edchOlpcServingRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 33307 e-DCH Link Quality Control UA07.1
s <DynamicParameterForEdchTti2ms>
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>-
edchOlpcServingRatioThreshold 3 RNC none system_restricted Radio HSUPA Power Control % Integer 0 100 N.A. 34249 E-DCH Adaptative HARQ Control UA6.0
s <DynamicParameterForEdchTti2ms>
The E-DCH Processing Overload Level IE defines the threshold that determines
when the Node B shall indicate processing issue problems to the RNC
edchProcessingOverloadLevel EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Overload Control TTIs Integer 0 10 0 29840 Commercial Hsupa introduction UA5.0
The value '0' is a special value that means infinity, i.e. when this value is used, the
Node B shall never in
edchRateSchedulerOptimisationTimer BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSUPA Scheduler N.A. Integer 10 50 4 10 29840 Commercial Hsupa introduction UA5.0
This parameter activates the allocation of EDCH resources for this BTS CELL.
<BTSEquipment>-<BTSCell>- * FALSE: no EDCH resource is allocated for this BTS CELL
Parameter Class Evolution in UA08 & UTRAN
edchResourceActivation Class0CemParams 0 BTS critical customer_init Radio HSUPA N.A. Boolean FAUX 80685 UA8.1
<Class0CemParams> * TRUE: EDCH resource can be allocated for this BTS CELL (CF parameter model simplification
EDCH CONF::edchResourceId and parameter HSDPA C
This parameter activates the allocation of EDCH resources for this BTS CELL.
<BTSEquipment>-<BTSCell>- * FALSE: no EDCH resource is allocated for this BTS CELL
Parameter Class Evolution in UA08 & UTRAN
edchResourceActivation Class3CemParams 3 BTS none customer_init Radio HSUPA N.A. Boolean FAUX 80685 UA8.1
<Class3CemParams> * TRUE: EDCH resource can be allocated for this BTS CELL (CF parameter model simplification
EDCH CONF::edchResourceId and parameter HSDPA C
The BTS uses this parameter, depending on the value of the parameter
RfCarrier.hspaHardwareAllocation, to allocate EDCH on E-BBU of iCEM.
eDchResourceId EdchConf 0 BTS <BTSEquipment>-<BTSCell>-<EdchConf> critical system_restricted Radio HSUPA N.A. Integer 0 7 N.A. 29840 Commercial Hsupa introduction UA5.0
When the BTS allocates EDCH on iCEM (according to parameter
hspaHardwareAllocation), all BTS CELL using the same edch
edchSchedulerAlgorithm BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSUPA Scheduler N.A. Enumerate rateScheduling 29840 Commercial Hsupa introduction UA5.0
Determine the method used by the RNC to broadcast the edchCellIndicator
information in SIB5:
* OFF means this information is not broadcasted.
edchServiceIndicatorMethod FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Configuration N.A. Enumerate Off 32520 HSDPA and E-DCH service Indicator UA5.0
* ON means the information is always broadcasted with value
EDCH_CAPABLE_CELL.
* AUTO means value EDCH_CAPABLE
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>- SIR step size value for the uplink outer loop power control function related to the
edchSirStepFastDecrease 3 RNC none system_restricted Radio HSUPA Power Control dB Float -0,3 0 0,005 -0,02 34249 E-DCH Adaptative HARQ Control UA6.0
ms <DynamicParameterForEdchTti10ms> EDCH MAC-d flow when fast SIR decrease is triggered
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>- SIR step size value for the uplink outer loop power control function related to the
edchSirStepFastDecrease 3 RNC none system_restricted Radio HSUPA Power Control dB Float -0,3 0 0,005 -0,02 34249 E-DCH Adaptative HARQ Control UA6.0
s <DynamicParameterForEdchTti2ms> EDCH MAC-d flow when fast SIR decrease is triggered
Sequence containing the SIR step size values for the uplink outer loop power
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>-
edchSirStepHfi 3 RNC none system_restricted Radio HSUPA Power Control control function related to the EDCH MAC-d flow in case of HARQ failure dB Float 0 1 0,005 (0.15,0.1,0.2) 34249 E-DCH Adaptative HARQ Control UA6.0
ms <DynamicParameterForEdchTti10ms>
indication messages received
Sequence containing the SIR step size values for the uplink outer loop power
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>-
edchSirStepHfi 3 RNC none system_restricted Radio HSUPA Power Control control function related to the EDCH MAC-d flow in case of HARQ failure dB Float 0 1 0,005 (0.15,0.1,0.2) 34249 E-DCH Adaptative HARQ Control UA6.0
s <DynamicParameterForEdchTti2ms>
indication messages received
edchSofterHoLimit EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA Mobility % Integer 0 100 100 32076 E-DCH Macro Diversity Support UA6.0
This attribute provides the RNC E-DCH Scheduling Priority Indicator (E-DCH SPI)
<RadioAccessService>-<TrafficClassBasedQos>- associated to a given TrafficClassBasedQoS/ARPBasedQoS/THPBasedQoS QoS differentiation based on TC, ARP and
edchSpi ThpBasedQos 3 RNC none customer_tuning Radio HSUPA Scheduler N.A. Integer 0 15 15 25080 UA6.0
<ArpBasedQos>-<ThpBasedQos> instances combination. THP
This attribute is used in the E-DCH scheduler (at NodeB level) to prioritize the diff
edchSpiRelativeWeight EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none customer_tuning Radio HSUPA Scheduler N.A. Integer 0 100 -1,001E+47 33327 MAC-e Scheduler Evolutions UA6.0
it specifies E-TFCI Table Index for common E-DCH operation.
<RadioAccessService>-<DedicatedConf>-
NBAP & SIB5
edchTfciTableIndex CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH N.A. Integer 0 1 1 1 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
This parameter defines the E-DCH table index to use as defined in 25.321, annex
<RadioAccessService>-<EdpchInfoClass>-
External Document
edchTfciTableIndex EdpchParameters 3 RNC none system_restricted Radio HSUPA Scheduler B. Page 15 None Enumerate 10msTtiTable1 33327 MAC-e Scheduler Evolutions UA6.0 Alcatel-Lucent
<EdpchParameters>
In UA05, this parameter was defined as Edch_TFCs_TableIndex in EdchTfcConf.
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This parameter value gives the DTCH HS-SCCH power level relative to the
enhancedCellFachDtchHsscchPower HsdpaConf 0 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA FACH primary-CPICH power configured in this cell (Used only if the CQI is not dB Float -35 15 0,1 -12 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
available). 168710
defines the number of HARQ retransmissions in blind mode for Enhanced
enhancedCellFachPchHarqRetransNumber HsdpaConf 0 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_setting Radio HSDPA FACH CELL_FACH N.A. Integer 0 31 12 120428 Enhanced PCH support for Qchat LR Future
This parameter defines the mapping table from Emission Priority (EP) to
Committed Burst Size (CBS) to be used by the Node B for UL traffic on IP for the
<BTSEquipment>-<IpRan>-
epToCBS EthernetBandwidthPool 3 BTS none expert_tuning Transport Ethernet corresponding EthernetBandwidthPool.This parameter applies both for Native IP % Integer 0 100 1 (1,1,5,10,10,10,10,10) 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool>
Iub and Hybrid IP Iub.
<BTSEquipment>-<IpRan>- Emission Priority to be used by the Continuity Check Messages and Link Traces
epToCCMAndLTM MaintenanceAssociation 3 BTS none customer_tuning Transport Ethernet N.A. Integer 0 7 7 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation> Messages
This parameter defines the mapping table from Emission Priority (EP) to
<BTSEquipment>-<IpRan>- Commited Information Rate (CIR) to be used by the Node B for UL traffic on IP
epToCIR EthernetBandwidthPool 3 BTS none expert_tuning Transport Ethernet % Integer 0 100 1 (5,5,20,20,20,15,15,0) 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> for the corresponding EthernetBandwidthPool. The parameter epToCIR
corresponds to a distribution (%) of t
This parameter defines the mapping table from Emission Priority (EP) to
Congestion End Threshold to be used by the Node B for UL traffic on IP for the
<BTSEquipment>-<IpRan>- corresponding EthernetBandwidthPool..
epToCongestionEnd EthernetBandwidthPool 3 BTS none expert_tuning Transport Ethernet % Integer 0 100 1 (0,60,0,70,70,70,70,70) 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> This parameter applies both for Native IP Iub and Hybrid IP Iub.
This parameter defines the mapping table from Emission Priority (EP) to
<BTSEquipment>-<IpRan>- Congestion Start Threshold to be used by the Node B for UL traffic on IP for the
epToCongestionStart EthernetBandwidthPool 3 BTS none expert_tuning Transport Ethernet % Integer 0 100 1 (0,80,0,90,90,90,90,90) 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> corresponding EthernetBandwidthPool..
This parameter applies both for Native IP Iub and Hybrid IP Iub.
This parameter defines the mapping table from Emission Priority (EP) to
Maximum Burst Size (MBS) to be used by the Node B for UL traffic on IP for the
<BTSEquipment>-<IpRan>-
epToMBS EthernetBandwidthPool 3 BTS none expert_tuning Transport Ethernet corresponding EthernetBandwidthPool.. % Integer 0 100 1 (1,1,5,10,10,10,10,10) 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool>
This parameter applies both for Native IP Iub and Hybrid IP Iub.
This parameter defines the mapping table from Emission Priority (EP) to Peak
<BTSEquipment>-<IpRan>- Information Rate (PIR) to be used by the Node B for UL traffic on IP for the
epToPIR EthernetBandwidthPool 3 BTS none expert_tuning Transport Ethernet % Integer 0 100 1 (5,5,20,20,50,100,100,100) 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> corresponding EthernetBandwidthPool..The parameter epToPIR corresponds to a
distribution (%) of the
This parameter defines the mapping table from Emission Priority (EP) to Queue
<BTSEquipment>-<IpRan>- Size to be used by the Node B for UL traffic on IP for the corresponding
epToQueueSize EthernetBandwidthPool 0 BTS critical expert_tuning Transport Ethernet % Integer 0 100 1 (0,5,0,10,15,15,20,35) 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> EthernetBandwidthPool for the corresponding EthernetBandwidthPool.
This parameter applies both for Nativ
it specifies E-RGCH 2-Index-Step Threshold for common E-DCH operation.
<RadioAccessService>-<DedicatedConf>-
NBAP & SIB5.
ergch2IndexStepThreshold CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH N.A. Integer 0 37 1 20 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
This defines the threshold on E-RGCH index under which an UP command
corresponds to a +2 on E-RGCH index.
<RadioAccessService>-<EdpchInfoClass>-
ergch2IndexStepThreshold EdpchParameters 3 RNC none expert_tuning Radio HSUPA Scheduler This parameter requires to be larger than the parameter None Integer 0 37 20 33327 MAC-e Scheduler Evolutions UA6.0
<EdpchParameters>
Ergch3indexStepThreshold.
In UA05, this parameter was defined as Ergch_2-index-step threshold
<RadioAccessService>-<DedicatedConf>-
it specifies E-RGCH 3-Index-Step Threshold for common E-DCH operation.
ergch3IndexStepThreshold CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH N.A. Integer 0 37 1 16 108103 Enhanced Cell Fach for DL and UL LR14.2
NBAP & SIB5.
<CommonEdchEdpchInfo>
This defines the threshold on E-RGCH index under which an UP command
corresponds to a +3 on E-RGCH index.
<RadioAccessService>-<EdpchInfoClass>-
ergch3IndexStepThreshold EdpchParameters 3 RNC none expert_tuning Radio HSUPA Scheduler This parameter requires to be smaller than the parameter None Integer 0 37 16 33327 MAC-e Scheduler Evolutions UA6.0
<EdpchParameters>
Ergch2indexStepThreshold.
In UA05, this parameter was defined as Ergch_3-index-step threshol
This parameter indicates how to perform the power control on the eRGCH
channel
ergchPowerControlMode EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio HSUPA Power Control N.A. Enumerate fixed 29840 Commercial Hsupa introduction UA5.0
Note: fixedPowerLevel is the only value allowed in this release
The E-RGCH Power Offset IE indicates the Power offset relative tothe pilot bits
<RadioAccessService>-<DedicatedConf>-
ergchPowerOffset EdchCellClass 3 RNC none system_restricted Radio HSUPA Power Control on the DL DPCCH except when F-DPCH is
dB Float -32 31,75 0,25 -4 29840 Commercial Hsupa introduction UA5.0
<EdchCellClass>
configured.
The E-HICH Power Offset indicates the Power Offset relative to the pilot bits on
<RadioAccessService>-<DedicatedConf>-
ergchPowerOffsetEdchTti2ms EdchCellClass 3 RNC none system_restricted Radio HSUPA Power Control the DL DPCCH when E-DCH TTI is 2msec (excepted when F-DPCH is dB Float -32 31,75 0,25 -4 33336 HSUPA Category 4 to 6 Support UA6.0
<EdchCellClass>
configured).
The power relative to primary CPICH of the cell, devoted to one e-RGCH
ergchPowerSignature EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA Power Control dB Float -35 15 0,1 -28,6 29840 Commercial Hsupa introduction UA5.0
signature is indicated here when the fixed mode is chosen.
points to the EthernetBandwidthPool object where the traffic flow associated to
ethernetBandwidthPoolId VirtualInterface 0 BTS <BTSEquipment>-<IpRan>-<VirtualInterface> critical customer_setting Transport Ethernet N.A. ServiceLink N.A. 79362 Flexible Operator Configurable Split IP Iub UA8.1
the considered VirtualInterface is directed
Enable/disable the CN to define the HO strategy regarding the LTE access on a
eUtranServiceHoRanapIeEnable Imcta 3 RNC <RadioAccessService>-<Imcta> none customer_setting Radio Mobility LTE N.A. Boolean false 100894 UMTS to LTE Handover LR14.2
per RAB basis
<RNC>-<CellProfiles>-
EUtranFrequencyAndPriorityInfoLi EARFCN of the downlink carrier frequency to be used in cell reselection Mobility between UMTS and LTE - Cell
eUtraTargetDlCarrierFrequencyArfcn 3 RNC <CellSelectionWithPriorityProfile>- none customer_setting Radio Mobility [Cell Selection] MHz Integer 0 65535 1 N.A. 81436 UA8.1
st procedure (3GPP 36.101) Reselection
<EUtranFrequencyAndPriorityInfoList>
<RNC>-<CellProfiles>-
EUtranFrequencyAndPriorityInfoLi ‘TRUE’ means that the UE may detect the presence of a E-UTRA cell and report Mobility between UMTS and LTE - Cell
eUtraTargetFrequencyDetection 3 RNC <CellSelectionWithPriorityProfile>- none customer_setting Radio Mobility [Cell Selection] N.A. Boolean N.A. 81436 UA8.1
st to NAS. This information is set in SIB19. Reselection
<EUtranFrequencyAndPriorityInfoList>
<RNC>-<CellProfiles>-
EUtranFrequencyAndPriorityInfoLi Mobility between UMTS and LTE - Cell
eUtraTargetFrequencyPriority 3 RNC <CellSelectionWithPriorityProfile>- none customer_setting Radio Mobility [Cell Selection] set a priority of a E-UTRA frequency in SIB19 N.A. Integer 0 7 1 N.A. 81436 UA8.1
st Reselection
<EUtranFrequencyAndPriorityInfoList>
<RNC>-<CellProfiles>-
EUtranFrequencyAndPriorityInfoLi Qrxlevmin (RSRQ) of the E-UTRA cell used for S criteria of the reselection Mobility between UMTS and LTE - Cell
eUtraTargetFrequencyQrxLevMin 3 RNC <CellSelectionWithPriorityProfile>- none customer_setting Radio Mobility [Cell Selection] dBm Integer -140 -44 2 N.A. 81436 UA8.1
st process. This information is set in SIB19 Reselection
<EUtranFrequencyAndPriorityInfoList>
<RNC>-<CellProfiles>-
EUtranFrequencyAndPriorityInfoLi RxLev (RSRP) Threshold High of the E-UTRA cell used by the UE reselection Mobility between UMTS and LTE - Cell
eUtraTargetFrequencyThreshxHigh 3 RNC <CellSelectionWithPriorityProfile>- none customer_setting Radio Mobility [Cell Selection] dB Integer 0 62 2 N.A. 81436 UA8.1
st process. This information is set in SIB19. Reselection
<EUtranFrequencyAndPriorityInfoList>
<RNC>-<CellProfiles>-
EUtranFrequencyAndPriorityInfoLi RxLev (RSRP) Threshold Low of the E-UTRA cell used by the UE reselection Mobility between UMTS and LTE - Cell
eUtraTargetFrequencyThreshxLow 3 RNC <CellSelectionWithPriorityProfile>- none customer_setting Radio Mobility [Cell Selection] dB Integer 0 62 2 N.A. 81436 UA8.1
st process. This information is set in SIB19. Reselection
<EUtranFrequencyAndPriorityInfoList>
<RNC>-<NodeB>-<FDDCell>- It is used to set the offset of the type1ThresholdEc/N0 defined in the
eventThresholdOffset Cdma1xMobilityInfo 3 RNC none customer_tuning Radio Mobility [HHO][CDMA] dB Integer -20 20 0 33853 Support of WCDMA to CDMA Handover UA6.0
<Cdma1xMobilityInfo> measurementCdma1xConfClass for each cell.
Limit of excess power that can be added to current power usage.
excessPowerIncreaseLimit BTSCell 3 BTS <BTSEquipment>-<BTSCell> none customer_setting Radio HSDPA Power Control % Float 0 50 0,1 15 93711 HSDPA throughput increase LR Future
This parameter defines whether feature 98850 Support on d2U 9326 and Support on d2U 9326 and MSNodeB for ATT
extendedIurCapabilitiesActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Protocols Iur N.A. Boolean FAUX 98850 UA7.1.3
MSNodeB for 28436 Extension of Iur capabilities is activated or not. of 28436 Extension of Iur capabitilities
This parameter is a rename of attenuationFeederDiv
externalAttenuationDivDl AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_init Radio Design External loss between the Cabinet and the Diversity antenna to be taken into dB Float 0 50 0,1 0 34667 Parameter Class Evolution in UA07 UA7.0
account for downlink.
External loss between the Cabinet and the Diversity antenna to be taken into
externalAttenuationDivUl AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_init Radio Design dB Float 0 50 0,1 0 34667 Parameter Class Evolution in UA07 UA7.0
account for uplink.
This parameter is a rename of attenuationFeederMain
externalAttenuationMainDl AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_init Radio Design External loss between the Cabinet and the Main antenna to be taken into account dB Float 0 50 0,1 0 34667 Parameter Class Evolution in UA07 UA7.0
for downlink.
External loss between the Cabinet and the Main antenna to be taken into account
externalAttenuationMainUl AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_init Radio Design dB Float 0 50 0,1 0 34667 Parameter Class Evolution in UA07 UA7.0
for uplink.
This parameter is used to allow operator choosing between using BTS Sw setting
(feederLoss) or using operator inputs for total external attenuation (totalLoss). If Parameter Class Evolution in UA08 & UTRAN
externalAttenuationType AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_setting BTS Antenna N.A. Enumerate feederLoss 80685 UA8.1
this parameter is set to ‘feederLoss’, BTS adds hard coded values to model simplification
externalAttenuationMai
This parameter represent the Downlink delay from the BTS RF output to the
externalDlDelay AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_setting Radio Design ns Float 0 2080 8,125 121,875 34667 Parameter Class Evolution in UA07 UA7.0
antenna
externalEthernetPortId LAGroup 0 BTS <BTSEquipment>-<LAGroup> none customer_tuning Transport Ethernet Identifier of the Ethernet Port composing the LAGroup ServiceLink N.A. 103182 Ethernet OAM in the Node B LR Future
This parameter defines the root directory where are located the BTS logs in the
externalLogRootDirectory BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Traces N.A. String 0 256 $NULLSTRING$ 123120 External Storage (WMS) of BTS Logs LR13.3
external file server
This parameter defines the port number to be used for the FTP transfer with the
externalLogServerFtpPort BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Traces N.A. Integer 0 65535 1 22 123120 External Storage (WMS) of BTS Logs LR13.3
external file server
externalLogServerIPV4Address BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Traces This parameter defines the IP V4 address of the external file server. N.A. IP4Address N.A. 123120 External Storage (WMS) of BTS Logs LR13.3
externalLogServerIPV6Address BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Traces This parameter defines the IP V6 address of the external file server. N.A. IP6Address N.A. 123120 External Storage (WMS) of BTS Logs LR13.3
External Document Page 17 Alcatel-Lucent
externalLogStorageActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Traces Activation flag of the external storage (WMS) of Bts logs N.A. Boolean false 123120 External Storage (WMS) of BTS Logs LR13.3
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This parameter defines the time at which the iBTS shall transfer the logs to the
externalLogTransferTime BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Traces OMC-B. It is recommended to provision this parameter to reflect the off-peak h Integer 0 23 1 2 123120 External Storage (WMS) of BTS Logs LR13.3
hours
The password of externalLogUserName to be used to access the OMC-B by the
ftp application, to transfer logs for storage.
externalLogUserPassword BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Traces A password with length = 0 means no password. N.A. String 0 28 $NULLSTRING$ 123120 External Storage (WMS) of BTS Logs LR13.3
This password is encrypted.
When the externalLogStorageActivation is True, this parame
T3 backhaul for 9316 MS Node B and 9326
externalPortId BandwidthPool 0 BTS <BTSEquipment>-<BandwidthPool> partial customer_setting Transport Ethernet rdnId of the PCM3 object on which the VCC is mapped. N.A. ServiceLink N.A. 93278 LR Future
d2U
externalPortId VCC 0 BTS <BTSEquipment>-<VCC> partial customer_setting Transport ATM rdnId of object on which the VCC is mapped. N.A. ServiceLink N.A. 13464 Multiple PCM Iub connection without IMA UA2.0
Identifier chosen by the OAM system, this is read only for the end user, will be
the externalSessionId of the children session.
externalSessionId FailureSession 0 RNC <RNC>-<CallTrace>-<FailureSession> partial expert_tuning Radio Call Trace N.A. Integer 0 2147483647 1 N.A. 120498 UA09 Call Trace Developments LR13.1
This value is used to gather CT data from different sessions/RNCs in the UTRAN
network.
Identifier chosen by the OAM system, this is read only for the end user, will be
the externalSessionId of the children session.
externalSessionId PermanentSession 0 RNC <RNC>-<CallTrace>-<PermanentSession> partial customer_setting Radio Call Trace N.A. Integer 0 2147483647 1 N.A. 162427 LRCE 3G Call Trace (End-to-End) LR Future
This value is used to gather data from different sessions in the UTRAN network.
This parameter is significant only for LRCE /
externalUlDelay AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_setting Radio Design This parameter represent the Uplink delay from the antenna to the BTS RF input ns Float 0 2080 8,125 154,375 34667 Parameter Class Evolution in UA07 UA7.0
<RadioAccessService>-<SccpchClass>-
fachClassId DxChConf 0 RNC critical system_restricted Radio Channels & Bearers FACH pointer of the Fach Class instance chosen N.A. ServiceLink N.A. 16717 RRC States Management UA3.0
<DxChConf>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
fachClassId FACH 0 RNC partial system_restricted Radio Channels & Bearers FACH pointer of the Fach Class instance chosen N.A. ServiceLink N.A. 16717 RRC States Management UA3.0
<FACH>
The information is used in SIB11 or SIB12 to control the UE measurements to be
<RNC>-<CellProfiles>-<CellSelectionProfile>- collected for inter frequency and inter-RAT cells while in the CELL_FACH state.
fachMeasOccasionCoef FachMeasOccasionInfo 3 RNC none expert_tuning Radio Mobility [Cell Selection] N.A. Integer 1 12 3 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfo>-<FachMeasOccasionInfo> The fachMeasOccasionInfo is optional. If it is not present, it indicates that the
fachMeasOccas
<RadioAccessService>-<DedicatedConf>- This parameter is used for Enhanced Soft Shutdown procedure only.
<ShutdownConfClass>-<EnhancedShutdownConf>- fachMeasOccasionCoef is used in SIB11 or SIB12 to control the UE
fachMeasOccasionCoef ShutdownCellSelectionParams 3 RNC none expert_tuning Radio Power Management Shutdown N.A. Integer 1 12 13 106905 Node B Soft Shutdown Evolution UA8.1
<Forced2GReselectionConf>- measurements to be collected for inter frequency and inter-RAT cells while in the
<ShutdownCellSelectionParams> CELL_FACH state.
Defines the negative power offset relative to the maximum power configured for
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
fachSrbPowerOffset FACH 3 RNC none expert_tuning Radio Power Management [Common Channels] the secondary CCPCH to be used when SRB data is sent over the FACH dB Float 0 25,5 0,1 0 34246 Power Control Enhancements UA6.0
<FACH>
channel.
<RadioAccessService>-<AlwaysOnConf>-
fachToCellPchTimer AlwaysOnTimer 3 RNC none customer_tuning Radio PS Call management Always-on s Integer 1 3600 60 29840 Commercial Hsupa introduction UA5.0
<AlwaysOnTimer>
<RadioAccessService>-<AlwaysOnConf>-
fachToUraPchTimer AlwaysOnTimer 3 RNC none customer_tuning Radio PS Call management Always-on s Integer 1 3600 60 29840 Commercial Hsupa introduction UA5.0
<AlwaysOnTimer>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>- Defines the negative power offset relative to the maximum power configured for
fachTrbPowerOffset FACH 3 RNC none expert_tuning Radio Power Management [Common Channels] dB Float 0 25,5 0,1 6 34246 Power Control Enhancements UA6.0
<FACH> the secondary CCPCH to be used when TRB data is sent over the FACH channel.
Absolute per TMU minimal number of Call Failure Trace (CFT) snapshots/traces
to be supported per minute by the FailureSession / CTf session independently
failureSessionFailureTracingFloor CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> none expert_tuning Radio Call Trace from overall CallP traffic call volume, would such a level of call failures/drops to N.A. Integer 0 2147483647 N.A. 120498 UA09 Call Trace Developments LR13.1
occur.
Configur
Absolute per TMU minimal number of Call Failure Trace (CFT) snapshots/traces
to be supported per minute by the FailureSession / CTf session independently
failureSessionFailureTracingFloor FailureSession 0 RNC <RNC>-<CallTrace>-<FailureSession> critical expert_tuning Radio Call Trace from overall CallP traffic call volume, would such a level of call failures/drops to N.A. Integer 0 2147483647 0 120498 UA09 Call Trace Developments LR13.1
occur.
Effectiv
Relative minimal number of Call Failure Trace (CFT) snapshots/traces to be
supported by the FailureSession / CTf session as a call failure/drop proportion of
failureSessionFailureTracingRatio CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> none expert_tuning Radio Call Trace % Float 0.00 100.00 0.01 N.A. 120498 UA09 Call Trace Developments LR13.1
overall CallP traffic call volume, would such a level of call failures/drops to occur.
Configura
This parameter specifies the fallback policy in case of CAC failure upon RAB
CAC triggered by CN initiated PS RAB
fallbackPolicyUponCacFailure FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Call Admission Control CAC modification. The basic fallback option is first fallback to DCH, then iMCTA in N.A. Enumerate Fallback_Imcta_Preemption 108647 LR Future
Modification
case of failure of previous step, Pre-emption in case of failure of previous step.
This parameter specifies the fallback policy in case of CAC failure on DRNC upon
CAC triggered by CN initiated PS RAB
fallbackPolicyUponCacFailureOnDrnc RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_tuning Radio Call Admission Control CAC RAB modification. The basic fallback option is first fallback to DCH, then iMCTA N.A. Enumerate Fallback_Imcta 108647 LR Future
Modification
in case of failure of previous step.
This parameter defines the maximum bit rate to grant:
-
during iRM Table algorithm when RL color is RED
fallbackRbRate DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none customer_tuning Radio Call Admission Control IRM Kbytes Integer 0 2048 N.A. 22841 iRM Cell colour calculation UA3.0
-
during iRM Scheduling downgrade (SRLR that may be triggered by iRM
Scheduling downgrade leads to replace the current dl RB rate by this target dl R
Defines the fallback strategy to take if the interface to a SAS operating In SAS
fallbackStrategyIfSasCentricFails LocationServices 3 RNC <RNC>-<LocationServices> none customer_tuning Transport IP N.A. Enumerate noFallback 120416 Iu-PC interface enhancement LR13.1
Centric mode fails.
<RadioAccessService>-<SoftCongestion>-
<SoftCongestionFrequency>- This parameter indicates the target bit rate in downlink to attribute to the new
fallBackTargetBitRateInDl SoftCongestionHspaService 3 RNC none expert_tuning Radio Load Management Soft Congestion Kbits/s Integer 0 2048 8 119026 Soft Congestion UA8.1
<SoftCongestionServiceInfo>- R99 service resulting from reconfiguration of the service from hspa to dch.
<SoftCongestionHspaService>
<RadioAccessService>-<SoftCongestion>-
<SoftCongestionFrequency>- This parameter indicates the target bit rate in uplink to attribute to the new R99
fallBackTargetBitRateInUl SoftCongestionHspaService 3 RNC none expert_tuning Radio Load Management Soft Congestion Kbits/s Integer 0 2048 8 119026 Soft Congestion UA8.1
<SoftCongestionServiceInfo>- service resulting from reconfiguration of the service from hspa to dch.
<SoftCongestionHspaService>
The parameter indicates whether RRC Redirection to this FrequencyAllocation
<RadioAccessService>-
(FA) could be considered for conversational or data calls. If the RRC
faType FrequencyAllocation 3 RNC <RrcRedirectionConfClass>- none customer_setting Radio Mobility RRC Redirection N.A. Enumerate N.A. 75069 iMCTA improvement UA7.0
establishment cause does not clearly identify whether a conversational or data
<FrequencyAllocation>
call is to be established, the
<RadioAccessService>-
fddFrequencyUserLabel FrequencyAllocation 3 OAM <RrcRedirectionConfClass>- none customer_setting Radio Mobility RRC Redirection user friendly frequency allocation name N.A. Enumerate N.A. 75069 iMCTA improvement UA7.0
<FrequencyAllocation>
List of up to 5 inter-frequency twin cells (co-located cells referenced by Cell Id) to
iMCRA - traffic balancing at RRC connection
which inter-frequency RRC redirection is not allowed to be performed by RRC
fddRejectCellList FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility RRC Redirection N.A. Integer 0 65535 <Null> 89857 establishment with Programmable Actions UA8.1
Connection Setup. RRC Connection Reject towards the frequency of this cell is to
Matrix
be performe
iMCRA - traffic balancing at RRC connection
This parameter defines per FDD carrier which target FDD carriers (belonging to
fddUnsupportedTargetCarrierList FddCarrier 3 RNC <RadioAccessService>-<FddCarrier> none customer_setting Radio Mobility RRC Redirection N.A. Enumerate N.A. 89857 establishment with Programmable Actions UA8.1
another frequency band) are not supported for inter band redirection
Matrix
TS 25.433 FDD TPC Downlink step size
<RadioAccessService>-<DedicatedConf>-
fdpchDlTpcStepSize DlInnerLoopConf 3 RNC none system_restricted Radio Power Management Power Control TPC downlink step size : step size for the dowlink power adjustment (for calls F- dB Enumerate 1 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<DlInnerLoopConf>
DPCH/SRB HSPA)
<RadioAccessService>-<DedicatedConf>- it specifies F-DPCH TPC command error rate target. SIB5.
fdpchTpcErrorRateTarget CommonEdchFdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH % Integer 1 10 1 1 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchFdpchInfo>
<RadioAccessService>-<DedicatedConf>-
fdpchTpcErrorRateTarget DlInnerLoopConf 3 RNC none system_restricted Radio Power Management Power Control Target error rate on TPC bits (for calls F-DPCH/SRB HSPA) % Integer 1 10 11 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<DlInnerLoopConf>
Elapsed time to wait before permanent observation data is cleaned up on the Merge 31746 Korea UA05 Counters at 5 min
filePurgeInterval PerfScanner 3 RNC <RNC>-<PerfScanner> none system_restricted Radio Counters N.A. Enumerate 72hours 33805 UA6.0
CNode's disk if the performance server does not perform collection and cleanup. granularity in UA06
Value of the filter coefficient that will be used in IIR (inside scheduler) in the CQI
filtCoeff OcnsHsdpa 2 RNC <RNC>-<NodeB>-<FDDCell>-<OcnsHsdpa> partial expert_tuning Radio Power Management OCNS N.A. Integer 0 10 0 34195 Support OCNS with HSDPA UA6.0
generating function, when cQIValue is set to 0
Support of 2.2 MHz spacing between 2G and
FilterBandwidthDownlink BTSCell 0 BTS <BTSEquipment>-<BTSCell> critical customer_setting BTS Carrier Spacing DL filter band KHz Enumerate 4600 117821 3G carriers on RRH60 and xTRM, OMC UA8.1
changeable filter
Support of 2.2 MHz spacing between 2G and
FilterBandwidthUplink BTSCell 0 BTS <BTSEquipment>-<BTSCell> critical customer_setting BTS Carrier Spacing UL filter band KHz Enumerate 4600 117821 3G carriers on RRH60 and xTRM, OMC UA8.1
changeable filter
This configurable parameter allows the operator to provision the filter co-efficient
<RadioAccessService>- k used for the forgetting filter algorithm applied to measures (i.e. Transmitted UTRAN Self Optimisation (CPICH auto
filterCoefficient PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] Enumerate 3 123989 LR Future
<PcpichPowerAutoAdjConfClass> Carrier Power) used by the 100508/123989 UTRAN Self Optimisation (cell adjustment)
overload).
<RadioAccessService>-<DedicatedConf>- Determins the inertie of the filtering algorithm for automatic carrier switch off. This
filterCoefficientForSwitchOff AutoSwitchOffConfClass 3 RNC none expert_tuning Radio Power Management SwitchOff N.A. Enumerate 11 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> parameter is used in a forgetting filter algorithm
<RadioAccessService>-<DedicatedConf>- Determins the inertie of the filtering algorithm for automatic carrier switch on. This
filterCoefficientForSwitchOn AutoSwitchOffConfClass 3 RNC none expert_tuning Radio Power Management SwitchOff N.A. Enumerate 11 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> parameter is used in a forgetting filter algorithm.
Filter factor for the MAC-d throughput which is used to determine the switching
<RadioAccessService>-<EdpchInfoClass>-
filterFactorMacdThr EdpchParameters 3 RNC none customer_tuning Radio HSUPA Power Control points for the change of the number of target HARQ retransmission in case of UE % Integer 0 100 1 15 82602 E-DCH user and cell throughput increase UA8.1
<EdpchParameters>
power limitation.
Filter factor for the UE internal measurement UE Transmitted Power (L3 filtering).
<RadioAccessService>-<DedicatedConf>-
filterFactorUeTxPower MeasurementConfClass 3 RNC none customer_tuning Radio HSUPA Power Control The formula for the filter is given in [3GPP_TS25.331] section 8.6.7.2 with N.A. Enumerate 4 82602 E-DCH user and cell throughput increase UA8.1
<MeasurementConfClass>
sample interval of one slot.
<RadioAccessService>-<OverloadInfo>- Control for Pch Upsize; 0 = no reject, 1 = all Pch Upsize are rejected, X>1 means
filteringUpsizeFromPchRejectRate Overload 3 RNC none system_restricted Radio Load Management Overload Control N.A. Integer 0 5 2 33565 UA06 Always-On developments UA6.0
<RNCNodeOverloadControl>-<Overload> 1/X Pch Upsize rejected
<RadioAccessService>-<DedicatedConf>-
firstStepReduceRate6AUlDch CacConfClass 3 RNC none expert_tuning Radio PS Call management N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>
Timer used to limit the occurrence of iRM scheduling upgrade procedure in a
period; used to reduce flip-flop between upgraded and downgraded states. iRM Scheduling upgrading based on radio
flipFlopUpDowngradeTimer RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio PS Call management iRM Scheduling s Integer 0 255 128 23332 UA4.1
Notice that isIrmSchedulingUpgradeAllowed(RadioaccessService) can be set to conditions
True only if flipFlopUpDowngra
The number of consecutive packets sent for compressor to transit from FO to SO Robust Header Compression (ROHC - RFC
foPacketRepeatThreshold RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC frames Integer 1 50 13 22845 LR Future
state. (Mode: U-O; Profile >= 1) 3095/4815)
It defines a guard timer for Forced HO step. At forcedHoMaxDuration expity, the
<RadioAccessService>-<DedicatedConf>-
cell will be locked and exiting calls - if any - will be dropped. The cell can be
forcedHoMaxDuration ForcedHoConf 3 RNC <ShutdownConfClass>-<EnhancedShutdownConf>- none expert_tuning Radio Power Management Shutdown s Integer 0 3600 1 120 106905 Node B Soft Shutdown Evolution UA8.1
locked before forcedHoMaxDuration expiry once all calls are moved out of the
<ForcedHoConf>
shutting donw ce
The requested bitrate to capture percentage of time the connection is active, the
<RNC>-<NodeB>-<FDDCell>-<RACH>-
fpEquivalentBitRate DlCacTransportInfo 2 RNC partial expert_tuning Radio Call Admission Control AAL2 distribution of data rates used and the burstiness of the traffic. The maximum is bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<DlCacTransportInfo>
16 Mbits/s (2^24), configurable by step of 1 bits/s.
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>- The requested bitrate to capture percentage of time the connection is active, the
fpEquivalentBitRate DlCacTransportInfo 2 RNC <FACH>-<CacTransportInfo>- partial expert_tuning Radio Call Admission Control AAL2 distribution of data rates used and the burstiness of the traffic. The maximum is bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<DlCacTransportInfo> 16 Mbits/s (2^24), configurable by step of 1 bits/s.
The requested bitrate to capture percentage of time the connection is active, the
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH>-
fpEquivalentBitRate DlCacTransportInfo 2 RNC partial expert_tuning Radio Call Admission Control AAL2 distribution of data rates used and the burstiness of the traffic. The maximum is bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<DlCacTransportInfo>
16 Mbits/s (2^24), configurable by step of 1 bits/s.
External Document Page 18 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
The requested bitrate to capture percentage of time the connection is active, the
<RNC>-<NodeB>-<FDDCell>-<RACH>-
fpEquivalentBitRate UlCacTransportInfo 2 RNC partial expert_tuning Radio Call Admission Control AAL2 distribution of data rates used and the burstiness of the traffic. The maximum is bits/s Integer 0 16777216 0 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<UlCacTransportInfo>
16 Mbits/s (2^24), configurable by step of 1 bits/s.
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>- The requested bitrate to capture percentage of time the connection is active, the
fpEquivalentBitRate UlCacTransportInfo 2 RNC <FACH>-<CacTransportInfo>- partial expert_tuning Radio Call Admission Control AAL2 distribution of data rates used and the burstiness of the traffic. The maximum is bits/s Integer 0 16777216 0 23479 Advanced QoS transport Framework UA6.0
<UlCacTransportInfo> 16 Mbits/s (2^24), configurable by step of 1 bits/s.
The requested bitrate to capture percentage of time the connection is active, the
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH>-
fpEquivalentBitRate UlCacTransportInfo 2 RNC partial expert_tuning Radio Call Admission Control AAL2 distribution of data rates used and the burstiness of the traffic. The maximum is bits/s Integer 0 16777216 0 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<UlCacTransportInfo>
16 Mbits/s (2^24), configurable by step of 1 bits/s.
<RNC>-<NodeB>-<FDDCell>-<RACH>-
fpMaxBitRate DlCacTransportInfo 2 RNC partial system_restricted Radio Call Admission Control AAL2 The maximum bitrate DL bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<DlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
fpMaxBitRate DlCacTransportInfo 2 RNC <FACH>-<CacTransportInfo>- partial system_restricted Radio Call Admission Control AAL2 The maximum bitrate DL bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<DlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH>-
fpMaxBitRate DlCacTransportInfo 2 RNC partial system_restricted Radio Call Admission Control AAL2 The maximum bitrate DL bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<DlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<RACH>-
fpMaxBitRate UlCacTransportInfo 2 RNC partial system_restricted Radio Call Admission Control AAL2 The maximum bitrate UL bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<UlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
fpMaxBitRate UlCacTransportInfo 2 RNC <FACH>-<CacTransportInfo>- partial system_restricted Radio Call Admission Control AAL2 The maximum bitrate UL bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<UlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH>-
fpMaxBitRate UlCacTransportInfo 2 RNC partial system_restricted Radio Call Admission Control AAL2 The maximum bitrate UL bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<UlCacTransportInfo>
When too many frames are sitting in the Iu buffer, this parameter clarifies over
<RadioAccessService>-<DlRbSetConf>-
frameDiscardPeriod IuCsTimingAlignment 3 RNC none system_restricted Radio Synchronisation Iu-CS Timing Alignment which TTI the RNC must hold the Iu DL frames before discarding reduces ration frames Integer 0 255 N.A. 22788 Iu-CS Timing Alignment UA3.1
<IuCsTimingAlignment>
of frame loss.
frequencyBand RfCarrier 0 BTS <BTSEquipment>-<RfCarrier> critical customer_setting Radio Design N.A. Enumerate N.A. 28419 Dual-band NodeB UA6.0
frequencyBandList RNC 0 OAM <RNC> none customer_init Radio Design it indicates the frequency band list supported N.A. Enumerate umtsBand 0 none UA2.1
frequencyGroupId LocalCellGroup 0 BTS <BTSEquipment>-<LocalCellGroup> critical customer_setting Radio Design This attribute identifies the LocalCellGroup that can be shared by a PA. N.A. Integer 0 1 N.A. 20601 STSR2+2 and STSR2+1 NodeB configurations UA6.0
The parameter indicates if ciphering is allowed during SRNS CS relocation from HSPA VoIP from LTE VoIP to WCDMA CS
fromEutraRelocationCiphering CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none customer_setting Radio Mobility LTE N.A. Enumerate cipheringDisabledIgnore 83659 LR13.1
LTE within the RNC for incoming SRVCC VoIP HHO from LTE to UMTS. Continuity (VCC)
This parameter is used to indicate if ciphering is allowed during SRNS relocation
from LTE within the RNC.
fromEutraRelocationCiphering PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none customer_setting Radio Mobility LTE if the value is cipheringDisabledReject the ciphering is not allowed and the N.A. Enumerate cipheringDisabledIgnore 104489 LTE to UMTS HO UA8.1
relocation procedure is rejected.
if the value is cipheringDisabledIgno
This parameter defines the Delay between two counting steps.
Used for UE counting
gapBetweenCountingStep MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS Parameter applicable in PTM&PTP allowed Service Areas and PTM only Service N.A. Integer 0 10 N.A. 31868 MBMS Broadcast UA7.1
Areas.
This parameter is not used in this release.
<RadioAccessService>-<OverloadInfo>-
gappingTime AutoRrcCnxFilter 3 RNC none system_restricted Radio Load Management RRC Overload Control It defines the time period for admitted calls based on the RNC overload level s Integer 1 300 60 33804 Manual Overload Control UA5.0
<RNCNodeOverloadControl>-<AutoRrcCnxFilter>
<RadioAccessService>-<OverloadInfo>-
It is the time unit to control the number of calls to a CN domain after receiving the
gappingTime ReceivingRanapOverloadControl 3 RNC <RanapOverloadControl>- none system_restricted Radio Load Management RANAP s Integer 1 600 20 33804 Manual Overload Control UA5.0
RANAP OVERLOAD CONTROL message from CN.
<ReceivingRanapOverloadControl>
Absolute per TMU minimal number of calls to be traced by the
GeographicalSession / CTg session independently from overall CallP traffic call
geographicalSessionTracingFloor CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace volume. N.A. Integer 0 2147483647 N.A. 106719 RNC Call Trace Capacity Realignment LR13.1
Configurable default value to be used at GeographicalSession / CTg session
creation.
Absolute per TMU minimal number of calls to be traced by the
GeographicalSession / CTg session independently from overall CallP traffic call
geographicalSessionTracingFloor GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> critical expert_tuning Radio Call Trace volume. N.A. Integer 0 2147483647 0 106719 RNC Call Trace Capacity Realignment LR13.1
Effective tracing level for the GeographicalSession / CTg session is to be the
maximum of this floor minim
Relative minimal number of calls to be traced by the GeographicalSession / CTg
session as a proportion of overall CallP traffic call volume.
geographicalSessionTracingRatio CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace % Float 0 100 0.01 N.A. 106719 RNC Call Trace Capacity Realignment LR13.1
Configurable default value to be used at GeographicalSession / CTg session
creation.
Relative minimal number of calls to be traced by the GeographicalSession / CTg
session as a proportion of overall CallP traffic call volume.
geographicalSessionTracingRatio GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> critical expert_tuning Radio Call Trace % Float 0 100 0.01 0 106719 RNC Call Trace Capacity Realignment LR13.1
Effective tracing level for the GeographicalSession / CTg session is to be the
maximum of this ratio minimum and o
Indicates that UE is in improved radio conditions based on UL SIR error. This
<RadioAccessService>-<EdchRncConf>- parameter corresponds to the Event E (Measurement Threshold 1) of NBAP
goodSirErrorThreshold EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control dB Float -31.0 31.0 0.5 31.0 120363 Smart phone EDCH resource usage. LR13.1
<EdchRncSmartphoneConf> dedicated measurement. Meaningful only if
psRabBadRadioSmartEdchResourceUsageActivation is True
Indicates if the NodeB uses a synchronisation on clock or a synchronisation on Additional GPS receiver support for Node-B
gpsSynchroMode SatelliteData 3 BTS <BTSEquipment>-<SatelliteData> none expert_tuning BTS Unused N.A. Enumerate clock 98839 Cancelled
Phase Syncronization
gRakeActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSUPA Throughput This parameter defines whether G-Rake can be used or not. N.A. Boolean FAUX 34393 Advanced Receiver for High UL Data Rate UA7.1.2
granularityPeriod PerfScanner 3 RNC <RNC>-<PerfScanner> none system_restricted Radio Counters Granularity period of polling min Integer 5 60 5 15 0 none UA1
granularityPeriod RtPerfScanner 3 RNC <RNC>-<RtPerfScanner> none customer_tuning Radio Counters Granularity period of polling min Integer 3 3 13 25101 Real Time Rnc Counters UA7.1
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on code load to transition from green to
green2YellowCLCThreshold IrmOnCellColourParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 40 22841 iRM Cell colour calculation UA3.0
<CacConfClass>-<IrmOnCellColourParameters> yellow.
<RadioAccessService>-<DedicatedConf>- Threshold used for decision of transition of Dl CEM Cell Load Color from Green
green2YellowDlCEMThreshold DlIrmCEMParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 100 27741 CEM load in iRM UA5.0
<NodeBConfClass>-<DlIrmCEMParameters> to Yellow.
<RadioAccessService>-<DedicatedConf>-
Threshold (in %) used for decision of transition of Downlink Transport cell Load
green2YellowDlTLCThreshold IrmIubTransportLoadParameters 3 RNC <NodeBConfClass>- none expert_tuning Radio Call Admission Control IRM % Integer 0 100 70 27740 Iub load in iRM UA4.2
Color from Green to Yellow.
<IrmIubTransportLoadParameters>
This parameter defines the threshold on HSPA Downlink codes cell load to
<RadioAccessService>-<DedicatedConf>- transition from green to yellow. The value indicates the percentage of the cell
green2YellowHspaCodesDlLoadThreshold HspaCellLoadParameters 3 RNC none expert_tuning Radio Call Admission Control HSDPA Load Color % Integer 0 100 1 79 81213 Load balancing between HSPA carriers UA7.1.2
<CacConfClass>-<HspaCellLoadParameters> capacity being occupied, i.e. not available to a new user. The lower the value, the
more capacity is a
This parameter defines the threshold on HSPA Downlink power cell load to
<RadioAccessService>-<DedicatedConf>- transition from green to yellow. The value indicates the percentage of the cell
green2YellowHspaPwrDlLoadThreshold HspaCellLoadParameters 3 RNC none expert_tuning Radio Call Admission Control HSDPA Load Color % Integer 0 100 1 79 81213 Load balancing between HSPA carriers UA7.1.2
<CacConfClass>-<HspaCellLoadParameters> capacity being occupied, i.e. not available to a new user. The lower the value, the
more capacity is a
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on power load to transition from green to
green2YellowPLCThreshold IrmOnCellColourParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 40 22841 iRM Cell colour calculation UA3.0
<CacConfClass>-<IrmOnCellColourParameters> yellow.
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on UL CEM load to transition from Green to
green2YellowUlCEMThreshold UlIrmCEMParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 100 27741 CEM load in iRM UA5.0
<NodeBConfClass>-<UlIrmCEMParameters> Yellow
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on UL radio load to transition from Green to
green2YellowUlRadioLoadThreshold UlIrmRadioLoadParameters 3 RNC none expert_tuning Radio Call Admission Control UL Radio Load % Integer 0 100 100 27745 UL Load Estimation UA5.0
<CacConfClass>-<UlIrmRadioLoadParameters> Yellow
It indicates the presence of the GSM band 1800 (in a context of hard handover 3G to 2G Handover with GSM measurements
gsm1800Present RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
from 3G to 2G). (With and without Compressed Mode)
It indicates the presence of the GSM band 1900 (in a context of hard handover 3G to 2G Handover with GSM measurements
gsm1900Present RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
from 3G to 2G). (With and without Compressed Mode)
It indicates the presence of the GSM band 450 (in a context of hard handover 3G to 2G Handover with GSM measurements
gsm450Present RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
from 3G to 2G). (With and without Compressed Mode)
It indicates the presence of the GSM band 480 (in a context of hard handover 3G to 2G Handover with GSM measurements
gsm480Present RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
from 3G to 2G). (With and without Compressed Mode)
It indicates the presence of the GSM band 850 (in a context of hard handover 3G to 2G Handover with GSM measurements
gsm850Present RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
from 3G to 2G). (With and without Compressed Mode)
It indicates the presence of the GSM band 900 extended (in a context of hard 3G to 2G Handover with GSM measurements
gsm900EPresent RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
handover from 3G to 2G). (With and without Compressed Mode)
It indicates the presence of the GSM band 900 Primary (in a context of hard 3G to 2G Handover with GSM measurements
gsm900PPresent RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
handover from 3G to 2G). (With and without Compressed Mode)
It indicates the presence of the GSM band 900R (in a context of hard handover 3G to 2G Handover with GSM measurements
gsm900RPresent RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Configuration N.A. Boolean FAUX 13447 UA2.0
from 3G to 2G). (With and without Compressed Mode)
<RNC>-<NodeB>-<FDDCell>-
Used to offset the measurement quantity for the UE to determine if an event has
gsmCellIndivOffset GsmCellSelectionInfoConnMode 3 RNC <GsmNeighbouringCell>- none customer_tuning Radio Mobility [Cell Selection] dB Integer -50 50 N.A. 33820 Broadcast of SIB12 UA6.0
occurred.
<GsmCellSelectionInfoConnMode>
TS 25.331 Cell individual offset
Used to offset measured quantity value.
<RNC>-<NodeB>-<FDDCell>-
gsmCellIndivOffset GsmNeighbouringCell 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] For each cell that is monitored, an offset can be assigned with inband signalling. dB Integer -50 50 0 13450 Inter frequency Hard HO UA3.0
<GsmNeighbouringCell>
The offset can be either positive or negative. The offset is added to the
measurement quantity be
<RadioAccessService>-<Imcta>- This parameter defines the downlink available capacity value below or equal iMCTA Enhanced with HSPA Load – Blind
gsmDlAvailableCapacityThresholdToBlackColour GsmNeighbourConfClass 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] % Integer 0 100 1 100 89858 UA8.1
<GsmNeighbourConfClass> which a GSM cell has a black color HHO – Direct HHO on AO Upsize
Unified RRM Step 2 : Cell Load information
gsmNeighbourConfClassId GSMCell 3 RNC <RNC>-<GSMNeighbour>-<GSMCell> none customer_tuning Radio Mobility [HHO][3G2G] Pointer to a valid instance of GsmNeighbourConfClass MO N.A. ServiceLink N.A. 33326 UA6.0
exchange between 2G and 3G
It is the maximum number of measurement report without a GSM measurement
<RadioAccessService>-<DedicatedConf>- 3G to 2G Handover with GSM measurements
gsmRssiMeasValidityPeriod RRCMeasurement 3 RNC none customer_tuning Radio Mobility Compressed Mode after wich an old GSM measurement is deleted while the current measurement is N.A. Integer 1 20 5 13447 UA2.0
<MeasurementConfClass>-<RRCMeasurement> (With and without Compressed Mode)
missing.
<RadioAccessService>-<Imcta>- This parameter defines the uplink available capacity value below or equal which a iMCTA Enhanced with HSPA Load – Blind
gsmUlAvailableCapacityThresholdToBlackColour GsmNeighbourConfClass 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] % Integer 0 100 1 100 89858 UA8.1
<GsmNeighbourConfClass> GSM cell has a black color HHO – Direct HHO on AO Upsize
<RadioAccessService>-<EdpchInfoClass>- Guard time to prevent toggling between changes of the number of target HARQ
guardTimeForNHarqTargetChange EdpchParameters 3 RNC none customer_tuning Radio HSUPA Power Control ms Integer 0 5000 10 480 82602 E-DCH user and cell throughput increase UA8.1
<EdpchParameters> retransmissions.
<RNC>-<NodeB>-<FDDCell>-
Scheme1Cdma1xCellSelectionInf
hA 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] the holding time that over tHw is maintained to move to WCDMA s Integer 1 10 3 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme1Cdma1xCellSelectionInfo>
<RadioAccessService>-<DedicatedConf>-
happyBitDelay CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH it specifies Happy bit delay conditions for common E-DCH operation. SIB5. ms Enumerate 50 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
Delay to be used by the UE in the procedure to set the Happy Bit when E-DCH
<RadioAccessService>-<DedicatedConf>- TTI selected is 10ms. This parameter is ignored by the RNC when RB is mapped
happyBitDelay EdchCellClass 3 RNC none expert_tuning Radio HSUPA Scheduler ms Enumerate 50 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass> on to E-DCH non-scheduled data mode.
RRC configures MAC-e with the number of TTIs X, over which to eva
Delay to be used by the UE in the procedure to set the Happy Bit when E-DCH
<RadioAccessService>-<DedicatedConf>- TTI selected is 2ms. This parameter is ignored by the RNC when RB is mapped
happyBitDelayEdchTti2ms EdchCellClass 3 RNC none expert_tuning Radio HSUPA Scheduler ms Enumerate 50 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass> on to E-DCH non-scheduled data mode.
RRC configures MAC-e with the number of TTIs X, over which to eval
<RadioAccessService>-<DedicatedConf>- it specifies HARQ Info for common E-DCH operation. NBAP & SIB5.
harqInfo CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none customer_setting Radio Power Management FACH N.A. Enumerate rvtable 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
harqNbMaxRetransmissions HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Configuration Maximum number of allowed radio retransmissions N.A. Integer 0 31 7 27932 HSDPA Step1 UA4.2
External Document Page 19 Alcatel-Lucent
harqNbMaxRetransmissionsXcem HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA N.A. Integer 0 31 7 33390 HS-DSCH BLER Target Adjustment UA6.0
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
<RadioAccessService>-<DedicatedConf>- This parameter defines the delta value of the threshold of Transmitted Code
highB1ThresholdDelta DlIrmSchedulingUpgrade 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio PS Call management Power to apply to determine the suitable TxCP threshold required to configure an dB Float 0 56,5 0,5 0 30172 iRM Scheduling : Iur support UA5.0
<DlIrmSchedulingUpgrade> EventB1 NBAP dedicated measurement.
<RadioAccessService>-<DedicatedConf>-
Defines the hysteresis time required to configure an EventB1NBAP dedicated
highB1TimeToTrigger DlIrmSchedulingUpgrade 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio PS Call management ms Integer 500 60000 10 5000 30172 iRM Scheduling : Iur support UA5.0
measurement.
<DlIrmSchedulingUpgrade>
This parameter defines the max throughput of the upgraded PS RB after an iRM
<RadioAccessService>-<DlUserService>- scheduling upgrade triggered by an eventB1 NBAP dedicated measurement iRM Scheduling upgrading based on radio
highBitRate HighRbB1 3 RNC none expert_tuning Radio PS Call management iRM Scheduling - iur Kbits/s Integer 0 2048 N.A. 23332 UA4.1
<IrmSchedulingUpgrade>-<HighRbB1> report. This applies when the primary cell is on SRNC or on DRNC. This conditions
parameter should be present if isIrmS
This parameter determines the mapping of basic call types to high priority group
call type
highPriorityGroupCall BasicCallType 3 RNC <RadioAccessService>-<BasicCallType> none expert_tuning Radio Call Admission Control CAC N.A. Boolean N.A. 127550 Traffic Filtering in Cell Overload LR13.1
If the boolean is true, the corresponding basic call type (userLabel) is a part of
high priority group call type
This parameter defines whether feature 34216 High speech capacity with AMR
highSpeedCapacityWithAmrMonorateActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 34216 High speech capacity with AMR monorate UA6.0
monorate is activated or not. 34216 is part of the global feature 97424 Parity
If uplink traffic is above this threshold for a pre-configured time (see
<RadioAccessService>-<DedicatedConf>-
minBurstWindowForTtiSelection), then a TTI reconfiguration to 2ms TTI will be
highUplinkTrafficThresholdFor2msTti EdchTrafficActivitySmartphone 3 RNC <HspaTrafficActivityDetectionConf>- none expert_tuning Radio HSUPA Congestion Control Kbits/s Integer 0 5440 1 384 120363 Smart phone EDCH resource usage. LR13.1
considered if already at 10ms TTI.
<EdchTrafficActivitySmartphone>
Meaningful only if uplinkThresholdSmartEdchResourceUsageActivation i
hoConfClassId NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Mobility Configuration Handover conf class identifier N.A. ServiceLink N.A. 13450 Inter frequency Hard HO UA3.0
hoConfClassId RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio Mobility Configuration Handover conf class identifier N.A. ServiceLink N.A. 13450 Inter frequency Hard HO UA3.0
hoConfId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility identifier of the HOConfClass instance N.A. ServiceLink N.A. 0 none UA1
The holdingPriority is used only for VCC of an IMA group when the parameter
BTSEquipment::imaDefenseMethod is set to F5CellsBasedIMADefense. (For any
holdingPriority VCC 3 BTS <BTSEquipment>-<VCC> none expert_tuning Transport ATM N.A. Integer 0 16 N.A. 34682 IMA AlCAP defense for iBTS UA7.1.3
other value of BTSEquipment::imaDefenseMethod this holdingPriority value is
ignored). This parameter indi
Defines the Horizontal Accuracy, which will be requested to UE for its location fix.
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>-
horizontalAccuracyRequestedtoUe 3 RNC none expert_tuning Radio Location Services It is expressed as "uncertainty code" k. So the uncertainty in meter is derived N.A. Integer 0 127 19 22842 Network Assisted GPS Enhancements UA4.1
gy <AGPSUeBasedLocationTechnology>
from formula r = 10*(1.1(^k)-1) in meters. Cf. 23.032
If that parameter is TRUE, then there shall be a children MO HSDPA resource
hsdpaActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSDPA Configuration linked to the current FDDCell object, and a HSDPA Cell Class MO must also be N.A. Boolean FAUX 27932 HSDPA Step1 UA4.2
present.
hsdpaAdjustBlerToChannelVariation HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA N.A. Boolean VRAI 33390 HS-DSCH BLER Target Adjustment UA6.0
hsdpaAmpUsage HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Power Management % Integer 0 100 100 27350 xCEM UA5.1
This parameter provides the update period for the CQI offset to apply on
received CQI, used by CQI BLER adjustment algorithm. It is expressed in number
hsdpaBlerObservationWindow HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSDPA Configuration TTIs Integer 1 100 10 29819 HSDPA Performance Enhancement UA5.0
of TTI where a new transmission occurred for corresponding UE. This parameter
is used only if parameter
This parameter provides the step size for CQI BLER adjustment algorithm, in
hsdpaBlerStepSize HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSDPA Configuration case a NACK is received. This parameter is used only if parameter CQI Float 0,1 1 0,1 0,1 29819 HSDPA Performance Enhancement UA5.0
hsdpaCqiBlerAdjustment is set to outerLoopLikeAlgo.
This parameter indicates the minimum BLER target acceptable for HS-DSCH,
hsdpaBlerTargetLowerLimit HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Configuration used by CQI BLER adjustment algorithm. This parameter is used only if % Integer 1 99 10 29819 HSDPA Performance Enhancement UA5.0
parameter hsdpaCqiBlerAdjustment is set to outerLoopLikeAlgo.
hsdpaBlerTargetLowerLimitXcem HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA % Integer 1 99 1 33390 HS-DSCH BLER Target Adjustment UA6.0
hsdpaBlerTargetMediumLimit HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA % Integer 1 99 20 33390 HS-DSCH BLER Target Adjustment UA6.0
This parameter indicates the BLER target for HS-DSCH, used by CQI BLER
hsdpaBlerTargetUpperLimit HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Configuration adjustment algorithm. This parameter is used only if parameter % Integer 1 99 30 29819 HSDPA Performance Enhancement UA5.0
hsdpaCqiBlerAdjustment is set to outerLoopLikeAlgo.
This parameter indicates the BLER target for HS-DSCH, used by CQI BLER
adjustment algorithm. This parameter is used only if parameter
hsdpaBlerTargetUpperLimitXcem HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA % Integer 1 99 20 33390 HS-DSCH BLER Target Adjustment UA6.0
hsdpaCqiBlerAdjustmentAlgorithmXcem is set to activated. This parameter is
specific to xCEM
Definition of target BLER in OLPC for voice over HSDPA (not supported by
hsdpaBlerTargetVoice HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Power Control % Integer 1 99 11 36247 Cs Voice over HSPA LR15.1
iCEM).
hsdpaCellClassId HsdpaResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<HsdpaResource> partial customer_tuning Radio HSDPA Pointer to MO HSDPACellClass N.A. ServiceLink N.A. 27932 HSDPA Step1 UA4.2
hsdpaCodeTreeManagementActivation BTSEquipment 3 BTS <BTSEquipment> none customer_init Radio HSDPA N.A. Boolean FAUX 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
This parameter defines the HSDPA congestion delay detection threshold before
hsdpaCongestionDelayThresholdATMHigh BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Iub congestion ms Integer 1 5000 70 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
considering the MAC-d flow going over ATM as congested
This parameter defines the HSDPA decongestion delay detection threshold
hsdpaCongestionDelayThresholdATMLow BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Iub congestion ms Integer 1 5000 50 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
before considering the MAC-d flow going over ATM as non-congested
This parameter defines the HSDPA congestion delay detection threshold before
hsdpaCongestionDelayThresholdIPHigh BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Iub congestion ms Integer 1 5000 70 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
considering the MAC-d flow going over IP as congested
This parameter defines the HSDPA decongestion delay detection threshold
hsdpaCongestionDelayThresholdIPLow BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Iub congestion ms Integer 1 5000 50 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
before considering the MAC-d flow going over IP as non-congested
This parameter controls the activation of the congestion detection on the Node B
hsdpaCongestionDetection BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSDPA Iub congestion and the inclusion by the NodeB of the congestion status in the HS-DSCH Capacity N.A. Enumerate both 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
Allocation”.
This parameter activates the algorithm of CQI adjustment based on BLER
measurement.
hsdpaCqiBlerAdjustmentAlgo HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA
N.A. Enumerate blerRangeBasedAlgo 33390 HS-DSCH BLER Target Adjustment UA6.0
Note1: in UA4.2, the algorithm “blerRangeBasedAlgo was activated by default,
hence the default activation here.
hsdpaCqiBlerAdjustmentAlgorithmXcem HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA N.A. Enumerate constBLERTarget 33390 HS-DSCH BLER Target Adjustment UA6.0
This parameter controls the activation of the enhanced delay build-up detection
hsdpaDelayPerIubReference BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSDPA Iub congestion N.A. Enumerate notActivated 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
algorithm on the NodeB.
This parameter allows to configure a delay before declaring frame loss. This is
hsdpaDeSequencingWaitTimerIP BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Iub congestion ms Integer 0 100 0 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
used only when HSDPA is conveyed over IP.
Flexible HSDPA modulation usage versus
hsdpaFlexibleModulationVsCodeActivation HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_setting Radio HSDPA Configuration N.A. Boolean FAUX 34102 UA6.0
codes
hsdpaFullPowerUsage HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_setting Radio HSDPA N.A. Boolean FAUX 33391 HS-DSCH Pw Adjustment Evolution UA6.0
hsdpaGbrIncreaseFactorForMobility HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSDPA % Integer 0 100 0 29804 GBR on HSDPA UA6.0
hsdpaGbrNbNeededTtiForgettingFactor HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA N.A. Integer 0 11 8 29804 GBR on HSDPA UA6.0
hsdpaGbrNbUePerTtiForgettingFactor HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA N.A. Integer 0 11 8 29804 GBR on HSDPA UA6.0
hsdpaGbrTbSizeMonitoringForgettingFactorPerSpi HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA N.A. Integer 0 11 (8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8) 29804 GBR on HSDPA UA6.0
Maximum number of HSDPA user (logical channel) allowed per HsdpaResource
(H-BBU).
hsdpaMaxNumberUserHbbu BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Capacity 0 meaning maximum user allowed by software and hardware. N.A. Integer 0 65535 0 16746 Capacity licensing UA6.0
If Capacity.hsdpaNumberUserCapacityLicensing is not unlimited, then this
parameter becomes useless.
This parameter represents the Maximum number of HSDPA user (logical channel)
allowed per xCEM/eCEM.
hsdpaMaxNumberUserXcem BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA 0 means maximum user allowed by software and hardware. N.A. Integer 0 128 10 16746 Capacity licensing UA6.0
If Capacity.hsdpaNumberUserCapacityLicensing is not unlimited, then this
parameter becomes useless.
Maximum throughput in Kb/s for HSDPA traffic (MAC-hs layer) that can be used
by the HSXPA RESOURCE (that is on a bCEM)
External Document
hsdpaMaxThroughputBcem HsXpaResource 3 BTS <BTSEquipment>-<HsXpaResource> none expert_tuning Radio HSDPA Throughput Page 20 Kbits/s Mixed 1800 169200 1800 automatic 109344 bCEM SW introduction in WCDMA LR Future Alcatel-Lucent
“automatic” value means that it is automatically determined by the BTS, and re-
evaluated in case of BTS reset, resource lock/unlock, boa
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Maximum throughput in Kb/s for HSDPA traffic (MAC-hs layer) that can be used
by the HSXPA RESOURCE (that is on a eCEM)
hsdpaMaxThroughputEcem HsXpaResource 3 BTS <BTSEquipment>-<HsXpaResource> none customer_setting Radio HSDPA Throughput Kbits/s Mixed 1800 61200 1800 automatic UA8.1
“automatic” value means that it is automatically determined by the BTS, and re-
evaluated in case of BTS reset, resource lock/unlock, boa 118155 eCEM HSPA aggregate throughput increase
Maximum throughput in Kb/s for HSDPA traffic (MAC-hs layer) that can be used
by the HSDPA RESOURCE (that is on a H-BBU of an iCEM).
hsdpaMaxThroughputHbbu BTSHsdpaResource 3 BTS <BTSEquipment>-<BTSHsdpaResource> none expert_tuning BTS Capacity Licensing Kbits/s Mixed 5400 10800 5400 automatic 34454 UTRAN Licensing Enhancements UA7.0
“automatic” value means that it is automatically determined by the BTS, and re-
evaluated in case of BTS reset, resource loc
Maximum throughput in Kb/s for HSDPA traffic (MAC-hs layer) that can be used
by the HSXPA RESOURCE (that is on a xCEM) xCEM/UCUIII aggregate MAC-e throughput
hsdpaMaxThroughputXcem HsXpaResource 3 BTS <BTSEquipment>-<HsXpaResource> none expert_tuning BTS HSDPA Capacity Kbits/s Mixed 1800 39600 1800 automatic 34633 UA7.1
“automatic” value means that it is automatically determined by the BTS, and re- increase per board
evaluated in case of BTS reset, resource lock/unlock, boa
hsdpaMinAmpUsage HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Power Management % Integer 0 100 0 27350 xCEM UA5.1
This parameter defines the number of HSDPA Iub frames lost before declaring a
hsdpaNumberOfFrameBeforeCongestion BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Iub congestion N.A. Integer 1 255 10 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
Mac-d flow congested caused by frame loss.
This parameter defines the number of consecutive HSDPA Iub frames (with
hsdpaNumberOfFrameBeforeDeCongestion BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSDPA Iub congestion consecutive FSN) to receive before to switch back to « no congestion » after a N.A. Integer 1 255 3 33367 HSPA Congestion Control (TS 25.902) for Iub UA6.0
detection of congestion caused by frame loss.
hsdpaNumberUserCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_init BTS Capacity Licensing Maximum number of HSDPA users that the BTS is allowed to setup. N.A. Mixed 0 65534 infinite 16746 Capacity licensing UA6.0
This parameter allows to the operator if all the conditions are satisfied to choose
hsdpaPlusPreferredMode FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio HSDPA Dual cell N.A. Enumerate none 81204 Dual Cell HSDPA operation UA7.1.2
between Mimo mode and HSDPA Dual Cell operation within the RNC.
This parameter activates the allocation of HSDPA resources for this BTS CELL.
<BTSEquipment>-<BTSCell>- Parameter Class Evolution in UA08 & UTRAN
hsdpaResourceActivation Class0CemParams 0 BTS critical customer_setting Radio HSDPA FALSE: no HSDPA resource is allocated for this BTS CELL
N.A. Boolean FAUX 80685 UA8.1
<Class0CemParams> model simplification
TRUE: HSDPA resource can be allocated for this BTS CELL (CF parameter
HSDPA CONF::hsdpaResourceId and parameter HSDP
This parameter activates the allocation of HSDPA resources for this BTS CELL.
<BTSEquipment>-<BTSCell>- Parameter Class Evolution in UA08 & UTRAN
hsdpaResourceActivation Class3CemParams 3 BTS none customer_setting Radio HSDPA FALSE: no HSDPA resource is allocated for this BTS CELL
N.A. Boolean FAUX 80685 UA8.1
<Class3CemParams> model simplification
TRUE: HSDPA resource can be allocated for this BTS CELL (CF parameter
HSDPA CONF::hsdpaResourceId and parameter HSDP
The BTS uses this parameter, depending on the value of the parameter
RfCarrier.hspaHardwareAllocation, to allocate HSDPA on H-BBU of iCEM
hsdpaResourceId HsdpaConf 0 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> critical customer_setting Radio HSDPA N.A. ServiceLink N.A. 27940 H-BBU Pool Across Sectors UA4.2
When the BTS allocates HSDPA on iCEM (according to parameter
hspaHardwareAllocation), all BTS CELL using the same hs
hsdpaSchedulerAlgorithm HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_tuning Radio HSDPA Scheduler Algorithm to use for the HSDPA scheduler N.A. Enumerate Alcatel-Lucent 29807 MAC-hs Scheduler Improvements UA5.0
hsdpaSchedulerAlgorithmXcem HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_tuning Radio HSDPA Scheduler N.A. Enumerate proportionalThroughput 27350 xCEM UA5.1
This parameter is used to compute a weighting factor for the averaging window
used by the cost function of the scheduler. This parameter is only used for:
"Alcatel-Lucent and "proportionalFair" schedulerAlgorithm.
hsdpaSchedulerWeightingFactor HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Scheduler N.A. Integer 1 8 5 29807 MAC-hs Scheduler Improvements UA5.0
The weighting factor is:
(2exp(hsdpa
hsdpaSchedulerWeightingFactorXcem HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA N.A. Integer 1 8 8 33390 HS-DSCH BLER Target Adjustment UA6.0
Determine the method used by the RNC to broadcast the hsdpaCellIndicator
information in SIB5:
* OFF means this information is not broadcasted.
hsdpaServiceIndicatorMethod FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSDPA Configuration N.A. Enumerate Off 32520 HSDPA and E-DCH service Indicator UA5.0
* ON means the information is always broadcasted with value
HSDPA_CAPABLE_CELL.
* AUTO means value HSDPA_CAPA
This parameter gives a weight to increase or decrease the data rate according to
the SPI.
hsdpaSpiRelativeWeight HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_tuning Radio HSDPA Scheduler
N.A. Integer 1 100 -1,001E+47 29807 MAC-hs Scheduler Improvements UA5.0
Note1: SPI = Scheduler Priority Indicator. SPI goes from 0 to 15.
Note2: If all weights are equal to 100, SPI management is deactivated
(64, 128, 192, 256, 320, 384, 448, 512,
defines the upper limit of each screening for the user perceived throughput of DL
hsdpaThd PmUserTpConf 3 RNC <RadioAccessService>-<PmUserTpConf> none customer_tuning Radio Counters Kbits/s Integer 1 42000 1 576, 640, 704, 768, 832, 896, 960, 34696 User Perceived Throughput Counters UA7.0
HSDPA interactive/background traffic
1024, 1088, 1152, 1216)
hsdpaThroughputCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_init BTS Capacity Licensing Maximum mac-hs throughput allowed for HSDPA service. Kbits/s Mixed 0 2147483646 infinite 16746 Capacity licensing UA6.0
This parameter defines the scope where a Fallback on DCH is tried when a
failure occurred due HSDPA CAC resource shortage
* NO_FALLBACK disables the feature
hsdpaToDchFallbackPermission RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Call Admission Control CAC * ON_RAB_ASSIGNMENT corresponds to Core Network originated service N.A. Enumerate NoFallback 32602 HSPA to DCH FallBack UA5.0
evolution
events
* ON_MOBI
Corrective factor applied to RNC calculated EBR based on the Core Network
hsdpaTransportEbrCorrectiveFactor HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio Call Admission Control AAL2 % Integer 0 200 100 29804 GBR on HSDPA UA6.0
requeted GBR
This parameter states the way UE category are balanced in the scheduler in case
of resource limitation (code or power). The same throughput can be provided in
hsdpaUeCategoryThroughputWeighting HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_tuning Radio HSDPA Scheduler N.A. Enumerate ueCategoryProportionality 29807 MAC-hs Scheduler Improvements UA5.0
average to all UE categories as soon as they report the same CQI, or the
throughput can depend o
hsdpaUeCategoryThroughputWeightingXcem HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_tuning Radio HSDPA N.A. Enumerate ueCategoryProportionality 33390 HS-DSCH BLER Target Adjustment UA6.0
Define a dynamic preference between DC-HSDPA users and MIMO users at cell
level when hsdpaPlusPreferredMode= ‘NONE’. If both MIMO and DC activation
hsdpaUserCountDynamicPreferenceDcMimo FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio HSDPA Dual cell N.A. Integer 1 128 15 81204 Dual Cell HSDPA operation UA7.1.2
criteria are met AND parameter hsdpaPlusPreferredMode= ‘NONE’, the RNC
shall choose between MIMO and DC dyn
This parameter defines the reference of the HsdpaUserService to apply to
hsdpaUserServiceId HsdpaResource 3 RNC <RNC>-<NodeB>-<FDDCell>-<HsdpaResource> none customer_tuning Radio HSDPA Configuration N.A. ServiceLink N.A. 33621 HSPA Configuration at Site Granularity UA6.0
configure hsdpaUserservice for each cell’s environment.
Parameter Class Evolution in UA08 & UTRAN
hsdpaUserServiceProfileId DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio HSDPA Configuration Pointer to the HsdpaUserServiceProfile N.A. ServiceLink N.A. 80685 UA8.1
model simplification
Define the value that is used for the different filters used for HSDPA
management.
Radio measurement frequency increase : TX
hsdpaWindowsObserveTime BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio HSDPA Measurements Filter that need this parameter are: ms Integer 10 100 10 100 75998 UA7.1
power
- Filter used to smooth PtotPower/HSDPACell received in PMM cells every 10ms
- Filter used to smooth PtotPower/R99Cell received in PMM
L2 improvements support (RLC & MAC-hs/e
hsdschCreditCapInNominalRatePercentage HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Transport Iub Congestion Control Define the upper HS-DSCH credit limit in term of percentage of the nominal rate % Integer 100 1000 10 400 34388 UA7.0
S/W for improved RLC)
This parameter corresponds to:
- The timer validity for allocated data sent to RNC in Capacity Allocation
hsdschInterval HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSDPA Configuration ms Integer 10 500 10 50 27932 HSDPA Step1 UA4.2
message
-The minimum time between two Capacity Allocation send by NodeB
TS 25.433
<RadioAccessService>-<DedicatedConf>- Indicates the filtering coefficient to be applied to the HS-DSCH common
hsdschReqPwFilterCoeff NBAPMeasurement 3 RNC none expert_tuning Radio HSDPA Measurements N.A. Enumerate 3 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
<MeasurementConfClass>-<NBAPMeasurement> measurements
Defines the coefficient filter used by Node B
<RadioAccessService>-<DedicatedConf>- TS 25.433
hsdschReqPwReportingPeriod NBAPMeasurement 3 RNC none expert_tuning Radio HSDPA Measurements ms Integer 10 3600000 10 10000 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
<MeasurementConfClass>-<NBAPMeasurement> It defines the reporting period for HS-DSCH common measurement.
This parameter provides activation/deactivation of the slow start algorithm when L2 improvements support (RLC & MAC-hs/e
hsdschSlowStartActivation RbCongestionControl 3 RNC <RadioAccessService>-<RbCongestionControl> none expert_tuning Transport Iub Congestion Control N.A. Boolean VRAI 34388 UA7.0
transport is over HSDSCH S/W for improved RLC)
Slow-start period for HS-DSCH in 2ms TTI unit. Applicable for Congestion
<RadioAccessService>-<RbCongestionControl>- L2 improvements support (RLC & MAC-hs/e
hsdschSlowStartPeriod HsdschSlowStart 3 RNC none expert_tuning Transport Iub Congestion Control Recovery scenario and for Idle-to-Burst scenario and for RLC Fixed Mode (for ms Integer 0 20 2 N.A. 34388 UA7.0
<HsdschSlowStart> S/W for improved RLC)
FP Type 1 or 2) and RLC Flexible Mode (for FP Type 2)
<RadioAccessService>-<RbCongestionControl>- Define the slow-start ramp-up rate in percentage from minBR/GBR to the L2 improvements support (RLC & MAC-hs/e
hsdschSlowStartRate HsdschSlowStart 3 RNC none expert_tuning Transport Iub Congestion Control % Integer 0 100 10 <null> 34388 UA7.0
<HsdschSlowStart> InflatedRate. Applicable for Congestion Recovery and Idle-to-Burst scenario. S/W for improved RLC)
This parameter specifies time before commit CFN at which iBTS sends last HS-
HSPA transport bearer replacement on ATM &
hsdschTimStopFlowCtrlTBR BTSEquipment 0 BTS <BTSEquipment> critical system_restricted Radio HSDPA Flow control DSCH Capacity Allocation message with zero capacity to the RNC for all priority ms Integer 0 2550 2 50 75093 LR Future
IP
queues undergoing transport bearer replacement
This parameter determines the mapping of basic call types to hspa group call
type
hspaGroupCall BasicCallType 3 RNC <RadioAccessService>-<BasicCallType> none expert_tuning Radio Call Admission Control CAC N.A. Boolean N.A. 127550 Traffic Filtering in Cell Overload LR13.1
If the boolean is true, the corresponding basic call type (userLabel) is a part of
hspa group call type
The parameter allows to adjust the CEM allocation for a given RF carrier onto
iCEM or eCEM/xCEM/bCEM (parameter modemPreference provides choice
hspaHardwareAllocation RfCarrier 3 BTS <BTSEquipment>-<RfCarrier> none customer_setting Radio Design N.A. Enumerate N.A. 34159 STSR3 Node-B configuration UA6.0
between eCEM/xCEM/bCEM)
RadioAccessService/0 DedicatedConf/0
hspaTrafficActivityDetectionConfId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Configuration HspaTrafficActivityDetectionConf identifier (link) N.A. ServiceLink 82602 E-DCH user and cell throughput increase UA8.1
HspaTrafficActivityDetectionConf/0
Each offset is indexed by CQI (Channel Quality Indicator) from CQI=1 to
CQI=30
(0,0,0,0,0,0,0,0,0, -3, -3, -5, -5, -8, -8, -
1st elementPower offset for UE with CQI 1
hsscchPcOffset HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Power Control dB Float -28 28 0,1 8, -8, -8, -8, -8, -8, -8, -8, -8, -8, -8, -8, - 27932 HSDPA Step1 UA4.2
30th eleme Power offset for UE with CQI 30
8, -8, -8)
The element for CQI<x> represents the power offset according to the CPICH to
apply to
This parameter indicates the Power offset relative to the pilot bits on the DL
hsScchPowerOffset HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none system_restricted Radio HSDPA Power Control dB Float -32 31,75 0,25 N.A. 27932 HSDPA Step1 UA4.2
DPCCH.Usage: hsScchPowerOffset = -32 + Offset* 0.25
hsscchSnr HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Power Management dB Float -5 19 0,1 5 27350 xCEM UA5.1
The parameter defines the symbol level SNR requirement of HS-SCCH Type 3 of
hsScchType3DualStreamSnr HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSDPA Dual cell dB Float -5 19 0,1 2,3 83984 2*2 MIMO UA8.1
dual streams transmission.
The parameter defines the symbol level SNR requirement of HS-SCCH Type 3 of
hsScchType3SingleStreamSnr HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSDPA Dual cell dB Float -5 19 0,1 1,4 83984 2*2 MIMO UA8.1
single stream transmission.
hsxpaGroupingWeight HsXpaResource 3 BTS <BTSEquipment>-<HsXpaResource> none system_restricted Radio HSDPA Capacity N.A. Integer 1 10 11 34391 Multiple XCEM per carrier UA7.1.2
hsxpaR99ResourcesSharingId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio HSDPA Pointer to a valid instance of HsxpaR99ResourcesSharingCellClass MO N.A. ServiceLink N.A. 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
hsxpaResourceId HsdpaConf 2 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> partial customer_tuning Radio Design N.A. ServiceLink N.A. 34667 Parameter Class Evolution in UA07 UA7.0
If set to True the iMCTA function shall not try to allocate non-HSxPA capable
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- mobiles on a cell supporting HSxPA and HSxPA capable mobiles on a cell not intelligent Multi-Carrier Traffic Allocation
hsxpaSegmentationEnable 3 RNC none system_restricted Radio Mobility [HHO][iMCTA] N.A. Boolean FAUX 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> supporting HSxPA. If set to false the
(iMCTA)
segmentation doesn’t occurs. This option doesn’t apply in case
<RadioAccessService>-<DedicatedConf>-
hysteresis Cdma1xEvent3a 3 RNC <MeasurementCdma1xConfClass>- none customer_tuning Radio Mobility [HHO][CDMA] dB Float 0 7,5 0,5 0 33853 Support of WCDMA to CDMA Handover UA4.1K
<Cdma1xEvent3a>
<RadioAccessService>-<DedicatedConf>-
FullEventHOConfHhoMgtEvent1A <HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of intraFreq- Service Based Mobility parameters
hysteresis 3 RNC none customer_tuning Radio Mobility [HHO][IntraFreq InterRnc] dB Float 0 7,5 0,5 2 33546 UA6.0
WithoutIur <FullEventHOConfHhoMgt>- interRnc event in Full Event Mode. enhancement
<FullEventHOConfHhoMgtEvent1AWithoutIur>
<RadioAccessService>-<DedicatedConf>- This parameter defines the hysteresis to configure for the triggering of Event 1A Service Based Mobility parameters
hysteresis1A Event1AHoConfInSib11 3 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<HoConfClass>-<Event1AHoConfInSib11> in SIB11. enhancement
<RadioAccessService>-<DedicatedConf>- This parameter defines the hysteresis to configure for the triggering of Event 1A Service Based Mobility parameters
hysteresis1A Event1AHoConfInSib12 0 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<HoConfClass>-<Event1AHoConfInSib12> in SIB12. enhancement
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of event 1A Service Based Mobility parameters
hysteresis1A FullEventHOConfShoMgtEvent1A 3 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<FullEventHOConfShoMgt>- in Full Event mode enhancement
<FullEventHOConfShoMgtEvent1A>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of event 1B Service Based Mobility parameters
hysteresis1B FullEventHOConfShoMgtEvent1B 3 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<FullEventHOConfShoMgt>- in Full Event mode enhancement
<FullEventHOConfShoMgtEvent1B>
External Document Page 21 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of event 1C
hysteresis1C FullEventHOConfShoMgtEvent1C 3 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 7,5 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventHOConfShoMgt>- in Full Event mode
<FullEventHOConfShoMgtEvent1C>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of event 1D
hysteresis1D FullEventHOConfShoMgtEvent1D 3 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 6 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventHOConfShoMgt>- in Full Event mode
<FullEventHOConfShoMgtEvent1D>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of event 1E Service Based Mobility parameters
hysteresis1E FullEventHOConfShoMgtEvent1E 3 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<FullEventHOConfShoMgt>- in Full Event mode enhancement
<FullEventHOConfShoMgtEvent1E>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of event 1F in Service Based Mobility parameters
hysteresis1F FullEventHOConfShoMgtEvent1F 3 RNC none customer_tuning Radio Mobility [SHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<FullEventHOConfShoMgt>- Full Event mode enhancement
<FullEventHOConfShoMgtEvent1F>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>-
hysteresis1J FullEventHOConfShoMgtEvent1J 3 RNC none customer_tuning Radio Mobility [SHO] Hysteresis to configure for the triggering condition of the Event 1J in Event Mode dB Float 0 7,5 0,5 3 32076 E-DCH Macro Diversity Support UA6.0
<FullEventHOConfShoMgt>-
<FullEventHOConfShoMgtEvent1J>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of Event 2D Service Based Mobility parameters
hysteresis2D FullEventHOConfHhoMgtEvent2D 3 RNC none customer_tuning Radio Mobility [HHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<FullEventHOConfHhoMgt>- in Full Event Mode. enhancement
<FullEventHOConfHhoMgtEvent2D>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the hysteresis to configure for the triggering of Event 2F Service Based Mobility parameters
hysteresis2F FullEventHOConfHhoMgtEvent2F 3 RNC none customer_tuning Radio Mobility [HHO] dB Float 0 7,5 0,5 1 33546 UA6.0
<FullEventHOConfHhoMgt>- in Full Event Mode. enhancement
<FullEventHOConfHhoMgtEvent2F>
Defines the IB_SG_DATA encoding variant in SIU message according to 3GPP
ibSgDataEncodingVariant NodeB 2 RNC <RNC>-<NodeB> partial customer_setting Radio Channels & Bearers SIB N.A. Enumerate variant2 28016 3GPP compliant NBAP (multi-vendor) UA5.0
Spec 25.433 Annex D
<RNC>-<NodeB>-<FDDCell>-
Scheme2Cdma1xCellSelectionInf Time during which the umts pilot continues at the value lower than idleRSCP_TH
idleRscphd 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] s Integer 0 15 6 33853 Support of WCDMA to CDMA Handover UA6.0
o when applying RSCP
<Scheme2Cdma1xCellSelectionInfo>
<RNC>-<NodeB>-<FDDCell>-
Scheme2Cdma1xCellSelectionInf
idleRscpTh 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] Threshold of the current UMTS pilot for idle mobility to 1X CDMA. N.A. Enumerate -105 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme2Cdma1xCellSelectionInfo>
<RNC>-<NodeB>-<FDDCell>-
Time during which the umts pilot continues at the value lower than THc when
idleSnrHd Snr 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility s Integer 0 15 6 33853 Support of WCDMA to CDMA Handover UA6.0
applying Ec/No
<Scheme2Cdma1xCellSelectionInfo>-<Snr>
<RNC>-<NodeB>-<FDDCell>-
idleSnrTh Snr 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility Threshold of the current UMTS pilot for idle mobility to 1X CDMA. dB Integer -16 0 -12 33853 Support of WCDMA to CDMA Handover UA6.0
<Scheme2Cdma1xCellSelectionInfo>-<Snr>
Minimum time between two AMR rate increases triggered by the remote radio
ignoreAmrRateIncreaseTimer CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none system_restricted Radio Speech Call Management AMR ms Integer 0 10000 10 2000 34403 AMR Code set 2 with TrFO UA7.0
link in case of IuUP V2
<RNC>-<CsCoreNetworkAccess>-
It is the time period that RNC waits for CN reducing the traffic according to the
ignoreTimer CSSendingRanapOverloadControl 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP s Integer 0 65535 7 33804 Manual Overload Control UA5.0
RANAP OVERLOAD CONTROL message.
<CSSendingRanapOverloadControl>
<RNC>-<PsCoreNetworkAccess>-
It is the time period that RNC waits for CN reducing the traffic according to the
ignoreTimer PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP s Integer 0 65535 7 33804 Manual Overload Control UA5.0
RANAP OVERLOAD CONTROL message.
<PSSendingRanapOverloadControl>
This parameter indicates the time lapse to wait before the appropriate IMA
imaDefenseDelay ImaGroup 3 BTS <BTSEquipment>-<ImaGroup> none expert_tuning Transport ATM IMA Defense action is started. If No IMA Defense Method is to be used (as given by s Integer 0 300 30 13465 IMA UA3.0
BTSEquipment::imaDefenseMethod) this value is ignored.
This parameter specifies the IMA Defense method to be used by the iBTS. (0 -
imaDefenseMethod BTSEquipment 3 BTS <BTSEquipment> none customer_init Transport ATM IMA N.A. Enumerate None 34682 IMA AlCAP defense for iBTS UA7.1.3
None, 1 - F5CellsBasedImaDefense, 2 - AlcapBasedImaDefense)
This parameter specifies the IMA Defense method to be used by the iBTS. (0 -
imaDefenseMethod BTSEquipment 3 BTS <BTSEquipment> none customer_setting Transport ATM IMA N.A. Enumerate None 34682 IMA AlCAP defense for iBTS UA07.1.3
None, 1 - F5CellsBasedImaDefense, 2 - AlcapBasedImaDefense)
<BTSEquipment>-<ImaGroup>- Parameter Class Evolution in UA08 & UTRAN
imaPcmList Class0ImaGroupParams 0 BTS critical customer_setting Transport ATM IMA list PCM in IMA group N.A. ServiceLink N.A. 80685 UA8.1
<Class0ImaGroupParams> model simplification
<BTSEquipment>-<ImaGroup>- Parameter Class Evolution in UA08 & UTRAN
imaPcmList Class3ImaGroupParams 3 BTS none customer_setting Transport ATM IMA list PCM in IMA group N.A. ServiceLink N.A. 80685 UA8.1
<Class3ImaGroupParams> model simplification
imaWeightingFactor ImaGroup 3 BTS <BTSEquipment>-<ImaGroup> none system_restricted Transport ATM IMA Weighting factor used to adapt PCM capacity to CEM ones % Integer 50 250 N.A. 13465 IMA UA3.0
iMCRA - traffic balancing at RRC connection
imcraCacActionListId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility Configuration Reference to an instance of the ImcraActionList object applied for iMCRA CAC. N.A. ServiceLink N.A. 89857 establishment with Programmable Actions UA8.1
Matrix
iMCRA - traffic balancing at RRC connection
<RadioAccessService>-<Imcra>-
imcraCallType ImcraAction 3 RNC none customer_setting Radio Mobility RRC Redirection Defines the call type for which the action shall be applied. N.A. Enumerate allGroupCall 89857 establishment with Programmable Actions UA8.1
<ImcraActionList>-<ImcraAction>
Matrix
iMCRA - traffic balancing at RRC connection
Reference to an instance of the ImcraActionList object applied for iMCRA
imcraServiceActionListId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility RRC Redirection N.A. ServiceLink N.A. 89857 establishment with Programmable Actions UA8.1
Service.
Matrix
If hard handover has failed then iMCTA can attempt handover to the next best cell
iMCTA Enhanced with HSPA Load – Blind
imctaFallbackHoFailure Imcta 3 RNC <RadioAccessService>-<Imcta> none customer_setting Radio Mobility [HHO][iMCTA] reported by the UE or configured for blind handover. This fallback can be enabled N.A. Enumerate disable 89858 UA8.1
HHO – Direct HHO on AO Upsize
for iMCTA triggers Alarm, CAC or both.
<RNC>-<UmtsNeighbouring>-
A neighboring FDD cell is eligible as target for feature 34437 if all relevant cell
UmtsNeighbouringIntelligentMultiC <UmtsNeighbouringRelation>-
imctaLoadBasedTargetCellColorThreshold 3 RNC none expert_tuning Radio Mobility [HHO][iMCTA] colors are lower (better) or equal than this threshold. For example, if the N.A. Enumerate Red 34437 Enhanced iMCTA UA7.0
arrierTrafficAllocation <UmtsNeighbouringIntelligentMultiCarrierTrafficAllo
threshold is yellow, all relevant target cell colors must be green or yellow.
cation>
indicates whether emergency calls should be handed over to GSM using
immediate Inter-System Handover after RAB establishment or kept in UMTS.
immediateHOofEmergencyCalls FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility RRC Redirection N.A. Enumerate enable_non_gps 34151 Immediate Handover of Emergency calls UA6.0
Following options are available: - disabled - inter system handover for all
emergency calls - inter system handov
indicates whether emergency calls should be handed over to GSM using
immediate Inter-System Handover after RAB establishment or kept in UMTS.
immediateHOofEmergencyCalls NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Mobility RRC Redirection N.A. Enumerate disabled 34151 Immediate Handover of Emergency calls UA6.0
Following options are available: - disabled - inter system handover for all
emergency calls - inter system handov
This is the default PlmnId.mcc in case of Imsi Hand Over InterPLMN when the
IMSI PLMN is unknown for a given UE.
imsiHoMobileCountryCode NationalRoaming 3 RNC <RadioAccessService>-<NationalRoaming> none customer_init Radio Mobility [National Roaming] TS23.003 subclause 4.1(release 1999)
N.A. BcdString 3 3 N.A. 21091 IMSI Based Handover UA3.0
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
The value of the MC
This is the default PlmnId.mnc in case of Imsi Hand Over InterPLMN when the
IMSI PLMN is unknown for a given UE.
imsiHoMobileNetworkCode NationalRoaming 3 RNC <RadioAccessService>-<NationalRoaming> none customer_init Radio Mobility [National Roaming] TS23.003 subclause 4.1(release 1999)
N.A. BcdString 2 3 N.A. 21091 IMSI Based Handover UA3.0
mobileNetworkCode of the network entity
Mobile Network Code (MNC) is a code identifying the PLMN i
This parameter defines, in the IMSI range mapping table supported by the RNC in
imsiRangeBegin ImsiRangeSplit 3 RNC <RNC>-<MocnParams>-<ImsiRangeSplit> none customer_setting Radio Design MOCN N.A. BcdString 6 15 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, the first IMSI value of the range
This parameter defines, in the IMSI range mapping table supported by the RNC in
imsiRangeEnd ImsiRangeSplit 3 RNC <RNC>-<MocnParams>-<ImsiRangeSplit> none customer_setting Radio Design MOCN N.A. BcdString 6 15 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, the last IMSI value of the range
subfra
[Continuous Packet Inacitvity threshold on HS-PDSCH/HS-SCCH transmission to switch to UE DRX
inactivityThresholdForUeDrxCycle CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management me Enumerate 512 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] state
(2ms)
[Continuous Packet Inactivity threshold on E-DCH transmission to transition from DTX Cycle 1 to E-DCH
inactivityThresholdForUeDtxCycle2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management Enumerate 1 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] Cycle 2 TTI
E-DCH
Inactivity threshold on E-DCH transmission to transition from DTX Cycle 1 to
inactivityThresholdForUeDtxCycle2Tti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] TTI 10 Enumerate 4 83871 Continuous Packet Connectivity (CPC) LR Future
Cycle 2 based on TTI 10 ms
ms
E-DCH
Inactivity threshold on E-DCH transmission to transition from DTX Cycle 1 to
inactivityThresholdForUeDtxCycle2Tti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] TTI Enumerate 1 83871 Continuous Packet Connectivity (CPC) LR Future
Cycle 2 based on TTI 2 ms
2ms
[Continuous Packet Determines for how long the UE listens to E-AGCH and E-RGCH channels after a E-DCH
inactivityThresholdForUeGrantMonitoring CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management Enumerate 256 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] scheduled transmission (after this timer, UE does not listen continuously) TTI
Determines for how long the UE listens to E-AGCH and E-RGCH channels after a E-DCH
inactivityThresholdForUeGrantMonitoringTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] scheduled transmission (after this timer, UE does not listen continuously) for 10 TTI 10 Enumerate 256 83871 Continuous Packet Connectivity (CPC) LR Future
ms base ms
Determines for how long the UE listens to E-AGCH and E-RGCH channels after a E-DCH
inactivityThresholdForUeGrantMonitoringTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] scheduled transmission (after this timer, UE does not listen continuously) for 2 ms TTI 2 Enumerate 256 83871 Continuous Packet Connectivity (CPC) LR Future
base ms
When a HO3G2G is rejected, this timer is armed for the requested target 2G
intelligent Multi-Carrier Traffic Allocation
inhibitTimer3g2g Imcta 3 RNC <RadioAccessService>-<Imcta> none customer_tuning Radio Mobility [HHO][iMCTA] cell. This cell will not be selected by the RNC until the timer elapses. If the timer s Integer 0 20 0 29415 UA5.0
(iMCTA)
has a 0 value, the timer is not armed and the cell is not filtered.
<RadioAccessService>-<Imcta>- Unified RRM Step 2 : Cell Load information
inhibitTimer3g2gLoad GsmNeighbourConfClass 3 RNC none customer_tuning Radio Mobility [HHO][3G2G] this parameter defines timer of validity of GSM cell load information s Integer 0 20 0 33326 UA6.0
<GsmNeighbourConfClass> exchange between 2G and 3G
this parameter defines validity timer for LTE cell load information
inhibitTimer3g4g Imcta 3 RNC <RadioAccessService>-<Imcta> none expert_tuning Radio Mobility LTE s Integer 0 20 1 0 100894 UMTS to LTE Handover LR14.2
0 means that the LTE cell is always green
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>- Default activity factor to consider for initial admission to PS I/B RAB mapped on
initialActivityFactorForIb 3 RNC none customer_init Radio HSDPA Resource Sharing % Integer 0 100 100 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
lass <HsxpaR99ResourcesSharingCellClass> HS-DSCH
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>- For SRB over HSPA, it is a corrective factor applied to code reservation, based
initialActivityFactorSrb 3 RNC none customer_setting Radio HSDPA Resource Sharing % Integer 0 100 10 29810 Fractional DPCH - SRB over HSPA UA8.1
lass <HsxpaR99ResourcesSharingCellClass> on the activity level of the SRB
used to determine the power that the cell must use initialy for the call, that is to
<RadioAccessService>-<DedicatedConf>- say:
initialDlEcnoTarget DlUsPowerConf 3 RNC none expert_tuning Radio Power Management Power Control dB Float -24 0 0,5 N.A. 34246 Power Control Enhancements UA6.0
<PowerConfClass>-<DlUsPowerConf> InitialDlTxPower= pcpichPower+ InitialDlEcnoTarget - CPICH Ec/Io
Its value depends on the service allocated to the UE.
<RadioAccessService>-<DedicatedConf>- it specifies Initial power on F-DPCH.
initialDlPower CommonEdchFdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH dB Float -35.0 15.0 0.1 0.0 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchFdpchInfo>
TS 25.433 ul sir target
used for the uplink inner loop and used to initialize the outer loop.
<RadioAccessService>-<DedicatedConf>-
initialSirTarget UlUsPowerConf 3 RNC none customer_tuning Radio Power Management Power Control It corresponds to the ratio Eb/N0.
dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA6.0
<PowerConfClass>-<UlUsPowerConf>
It is specified according to service class and desired QoS on the TrCH(s) within
the DPCCH. Its value is based on average f
<RadioAccessService>-<DedicatedConf>-
Defines the initial SIR target value when the UL of the PS RAB is mapped to E-
initialSirTargetEdch2ms UlUsPowerConfTti2ms 3 RNC <PowerConfClass>-<UlUsPowerConf>- none expert_tuning Radio HSUPA Power Control dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA6.0
DCH with TTI 2ms
<UlUsPowerConfTti2ms>
<RadioAccessService>-<DedicatedConf>- Defines the initial SIR target value when the DL of the PS RAB is mapped to
initialSirTargetHsdpa UlUsPowerConf 3 RNC none customer_tuning Radio HSDPA Power Control dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA6.0
<PowerConfClass>-<UlUsPowerConf> HSDPA
Initial ul interference value used by the RNC in the SIB7, when this one is sent to
CS fallback enhancement from LTE to
initialUlInterference RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none customer_tuning Radio Power Management RACH another RAN through CN by RIM procedures dBm Integer -110 -70 1 -110 115109 UA8.1
UMTS:enhanced Redirection
Significant when isRimForUtraSiFromLteActivated = TRUE
This parameter represents the initial number of credits granted to Mac-D upon a
<RadioAccessService>-<SccpchClass>-
initWindowSize DxChConf 0 RNC critical system_restricted Radio Synchronisation Iub Synchronisation new connection to cell context.
N.A. Integer 0 255 0 16717 RRC States Management UA3.0
<DxChConf>
Number of MAC-c/sh SDU.
External Document Page 22 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This parameter is used as a flag by the NodeB to decide whether AISG device
information is reported to the OMCB, and dedicated actions (scanning, tilt
integratedAisgDevicesManagement BTSEquipment 0 BTS <BTSEquipment> none expert_tuning BTS Antenna N.A. Integer 0 1 0 114908 RETA for RRH capacity licensing UA8.1
management, TMA gain update,...) are allowed on those devices from the
OMCB.
If DL measurement Rscp of the source cell > interferenceDropMarginRscp +
Rscp of best cell in ActiveSet)
<RadioAccessService>-<DedicatedConf>-
{
interferenceDropMarginEcNo ShoLinkAdditionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none expert_tuning Radio Load Management Soft Congestion dB Float 0 7,5 0,5 0 119026 Soft Congestion UA8.1
- trigger iMCTA alarm
<ShoLinkAdditionParams>
- if the HHO failed, UE will continue to send the event 1A, and so this will be
used as trigger to decide to drop the ca
If DL measurement Rscp of the source cell > interferenceDropMarginRscp +
Rscp of best cell in ActiveSet)
<RadioAccessService>-<DedicatedConf>-
{
interferenceDropMarginRscp ShoLinkAdditionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none expert_tuning Radio Load Management Soft Congestion dB Float 0 7,5 0,5 0 119026 Soft Congestion UA8.1
- trigger iMCTA alarm
<ShoLinkAdditionParams>
- if the HHO failed, UE will continue to send the event 1A, and so this will be
used as trigger to decide to drop the ca
<RadioAccessService>-<DedicatedConf>- TS 25.331 Filter coefficient
interFreqFilterCoeff InterFreqMeasConf 3 RNC none expert_tuning Radio Mobility Compressed Mode N.A. Enumerate 3 13450 Inter frequency Hard HO UA3.0
<MeasurementConfClass>-<InterFreqMeasConf> Filtering coefficient to be applied to the inter-frequency measurements of the UE.
It is the maximum number of measurement report without a interfrequency
<RadioAccessService>-<DedicatedConf>-
interFreqMeasValidityPeriod InterFreqMeasConf 3 RNC none customer_tuning Radio Mobility Compressed Mode interPLMN measurement after wich an old GSM measurement is deleted while N.A. Integer 1 20 5 13450 Inter frequency Hard HO UA3.0
<MeasurementConfClass>-<InterFreqMeasConf>
current measurement are missing
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
interFreqScalingFactorTReselection CellSelectionInfo 3 RNC none expert_tuning Radio Mobility [Cell Selection] Scaling factor used for interfreq cell reselection evaluation N.A. Float 1 4,75 0,25 N.A. 29816 UA5.0
<CellSelectionInfo> Structure (HCS)
<RNC>-<CellProfiles>-<CellSelectionProfile>-
interFreqScalingFactorTReselection CellSelectionInfoConnectedMode 3 RNC none expert_tuning Radio Mobility [Cell Selection] Scaling factor used for interfreq cell reselection evaluation N.A. Float 1 4,75 0,25 2,5 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode>
<RadioAccessService>-<DedicatedConf>-
<ShutdownConfClass>-<EnhancedShutdownConf>- This parameter is used for Enhanced Soft Shutdown procedure only. The scaling
interFreqScalingFactorTReselection ShutdownCellSelectionParams 3 RNC none expert_tuning Radio Power Management Shutdown N.A. Float 1 4,75 0,25 4,75 106905 Node B Soft Shutdown Evolution UA8.1
<Forced2GReselectionConf>- factor is used for interfreq cell reselection evaluation
<ShutdownCellSelectionParams>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<AccessSession>-
interFreqTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether interFreq reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<GeographicalSession>-
interFreqTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether interFreq reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
This parameter defines the max throughput of the upgraded PS RB after an iRM
<RadioAccessService>-<DlUserService>- scheduling upgrade triggered by an eventB2 NBAP dedicated measurement iRM Scheduling upgrading based on radio
intermediateRate MediumRbB2 3 RNC none expert_tuning Radio PS Call management iRM Scheduling - iur Kbits/s Integer 0 2048 128 23332 UA4.1
<IrmSchedulingUpgrade>-<MediumRbB2> report. This applies
conditions
when the primary cell is on SRNC or on DRNC.
Indicate the handover scheme in idle mode.
<RNC>-<NodeB>-<FDDCell>- RSCP : interRAT roaming depends on RSCP (THc, Hd) . Configuration allowed if
Scheme1Cdma1xCellSelectionInf
interRatMode 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none customer_tuning Radio Mobility [HHO][CDMA] cellType=normal
N.A. Enumerate interRatModeRscp 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme1Cdma1xCellSelectionInfo> Immediate : immediate interRat roaming whatever umts RSCP. Configuration
allowed whatever cellType
borderCellI : b
<RNC>-<NodeB>-<FDDCell>-
Scheme2Cdma1xCellSelectionInf
interRatMode 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] Indicate the handover scheme in idle mode. N.A. Enumerate measure 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme2Cdma1xCellSelectionInfo>
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
interRatScalingFactorTReselection CellSelectionInfo 3 RNC none expert_tuning Radio Mobility [Cell Selection] N.A. Float 1 4,75 0,25 N.A. 29816 UA5.0
<CellSelectionInfo> Structure (HCS)
<RNC>-<CellProfiles>-<CellSelectionProfile>-
interRatScalingFactorTReselection CellSelectionInfoConnectedMode 3 RNC none expert_tuning Radio Mobility [Cell Selection] Scaling factor used for 2G interRAT cell reselection evaluation N.A. Float 1 4,75 0,25 3 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode>
<RadioAccessService>-<DedicatedConf>-
<ShutdownConfClass>-<EnhancedShutdownConf>- This parameter is used for Enhanced Soft Shutdown procedure only. The scaling
interRatScalingFactorTReselection ShutdownCellSelectionParams 3 RNC none expert_tuning Radio Power Management Shutdown N.A. Float 1 4,75 0,25 1 106905 Node B Soft Shutdown Evolution UA8.1
<Forced2GReselectionConf>- factor is used for interfreq cell reselection evaluation
<ShutdownCellSelectionParams>
<RadioAccessService>-<DedicatedConf>-
intraFreqMeasurementQuantity RRCMeasurement 3 RNC none system_restricted Radio Mobility [SHO] The reporting quantity information for an intra-frequency measurement. N.A. Enumerate CpichEcNo 34303 WQA Detected cell identification UA6.0
<MeasurementConfClass>-<RRCMeasurement>
<RadioAccessService>-<DedicatedConf>- Filter coefficient for a oneshot intra-frequency measurement for the case where
intraFreqOneShotFilterCoefficient MeasurementConfClass 3 RNC none customer_tuning Radio Mobility [SHO][Periodical] N.A. Enumerate 4 34227 State transitioning developments UA6.0
<MeasurementConfClass> the measurement control is sent in Cell DCH.
<RadioAccessService>-<DedicatedConf>-
The reporting quantity information indication of SFN-SFN observed time difference
intraFreqSfnIndicatorOnRach RRCSysInfoMeas 3 RNC <MeasurementConfClass>-<RRCMeasurement>- none system_restricted Radio Mobility [Measurement] N.A. Enumerate NoRpt 34303 WQA Detected cell identification UA6.0
for an intra-frequency measurement report, which is sent on the RACH
<RRCSysInfoMeas>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<AccessSession>-
intraFreqTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether intraFreq reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<GeographicalSession>-
intraFreqTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether intraFreq reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
This parameter is needed for UA7.1 hybrid iBTS. It contains the IP address Add static IP address for Hybrid Iub
ipAddress NodeB 3 RNC <RNC>-<NodeB> partial customer_init Transport IP N.A. IP4Address N.A. 139402 LR Future
(static provisioning) of the iBTS. enhancement
indicates the IP address to be used (if present) at Node B side for UL traffic for
ipAddress VirtualInterface 0 BTS <BTSEquipment>-<IpRan>-<VirtualInterface> critical customer_setting Transport IP N.A. IP4Address N.A. 79362 Flexible Operator Configurable Split IP Iub UA8.1
the traffic flow associated to the considered VirtualInterface.
If the IP-ID Offset is less than this threshold for 3 consecutive packets, the IP-ID Robust Header Compression (ROHC - RFC
ipIdOffsetThreshold RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC frames Integer 0 255 1 32 22845 LR Future
is deemed to be non-random. (Mode: U-O-R; Profile >= 1) 3095/4815)
This parameter defines MTU (Maximum Transmission Unit) size used for user
plane, control plane and O&M plane in the Node B for UL traffic IP. It includes the IPv6 Support for OAM Traffic on the NodeB
ipV4MtuSize IpRan 0 BTS <BTSEquipment>-<IpRan> critical customer_setting Transport IP bytes Integer 541 1500 1 1500 108956 LR Future
IP header (20 Bytes for IPv4).The minimum size is computed so that UL R99 (OneBTS)
traffic on IP is never
This parameter defines MTU (Maximum Transmission Unit) size used for IpV6 IPv6 Support for OAM Traffic on the NodeB
ipV6MtuSize IpRan 0 BTS <BTSEquipment>-<IpRan> critical customer_setting Transport IP bytes Integer 1280 1500 1 1500 108956 LR Future
traffic (only O&M traffic in UA8). (OneBTS)
Indicates the IP version (IPv4 or IPv6) used for CT UDP traffic from LRCE to
TCE.
ipVersion CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace This parameter is significant only for LRCE / not significant for RNC 9370. N.A. Enumerate IpV4 162427 LRCE 3G Call Trace (End-to-End) LR Future
For LRCE this parameter is significant only if parameter
isCallTraceDataUdpStreamingToTceEnable
<RadioAccessService>-
Specifies the AMR monorate codec to be applied based on the current DL Iub
irmAmrMonoRate IrmAmrRatePerOls 3 RNC <DlIrmTableIubDsLoadConfClass>- none expert_tuning Radio Speech Call Management AMR N.A. Enumerate 12_2k 34216 High speech capacity with AMR monorate UA6.0
load color and the user AR priority level.
<IrmAmrRateList>-<IrmAmrRatePerOls>
<RadioAccessService>-
Specifies the AMR monorate codec to be applied based on the current DL Iub
irmAmrMonoRate IrmAmrRatePerOls 3 RNC <DlIrmTablePowerLoadConfClass>- none expert_tuning Radio Speech Call Management AMR N.A. Enumerate 12_2k 34216 High speech capacity with AMR monorate UA6.0
load color and the user AR priority level.
<IrmAmrRateList>-<IrmAmrRatePerOls>
<RadioAccessService>-
Specifies the AMR monorate codec to be applied based on the current DL Iub
irmAmrMonoRate IrmAmrRatePerOls 3 RNC <UlIrmTableCellLoadConfClass>- none expert_tuning Radio Speech Call Management AMR N.A. Enumerate 12_2k 34216 High speech capacity with AMR monorate UA6.0
load color and the user AR priority level.
<IrmAmrRateList>-<IrmAmrRatePerOls>
<RadioAccessService>-
Defines the maximum AMR rates based on the OLS and the downlink power load
irmAmrRate IrmAmrRatePerOls 3 RNC <DlIrmTableIubDsLoadConfClass>- none expert_tuning Radio Speech Call Management AMR N.A. Enumerate 12_2k 27805 AMR mode change during the call UA5.0
color.
<IrmAmrRateList>-<IrmAmrRatePerOls>
<RadioAccessService>-
Defines the maximum AMR rates based on the OLS and the downlink power load
irmAmrRate IrmAmrRatePerOls 3 RNC <DlIrmTablePowerLoadConfClass>- none expert_tuning Radio Speech Call Management AMR N.A. Enumerate 12_2k 27805 AMR mode change during the call UA5.0
color.
<IrmAmrRateList>-<IrmAmrRatePerOls>
<RadioAccessService>-
Defines the maximum AMR rates based on the OLS and the downlink power load
irmAmrRate IrmAmrRatePerOls 3 RNC <UlIrmTableCellLoadConfClass>- none expert_tuning Radio Speech Call Management AMR N.A. Enumerate 12_2k 27805 AMR mode change during the call UA5.0
color.
<IrmAmrRateList>-<IrmAmrRatePerOls>
<RadioAccessService>-<DedicatedConf>- This parameter corresponds to the threshold applied on Cpich RSCP which is RB Selection based on UE radio conditions
irmDlCoverageThreshold IrmOnRlConditionParameters 3 RNC none expert_tuning Radio Call Admission Control iRM RadioLink dBm Integer -115 -25 -100 23304 UA3.0
<CacConfClass>-<IrmOnRlConditionParameters> used to decide whether the UE radio conditions are poor or good. evaluation
<RadioAccessService>-<DedicatedConf>- This parameter corresponds to the threshold applied on -cpichEc/N0 which is RB Selection based on UE radio conditions
irmDlPowerThreshold IrmOnRlConditionParameters 3 RNC none expert_tuning Radio Call Admission Control iRM RadioLink dB Float 0 24 0,1 15 23304 UA3.0
<CacConfClass>-<IrmOnRlConditionParameters> used to decide whether the UE radio conditions are poor or good. evaluation
Bitmap of QoS to be taken in account for the iRM Iub Transport Load
<RadioAccessService>-<DedicatedConf>-
computation.Bit i corresponds to QoS i.Value 1: QoS to be taken in account;
irmIubLoadQos IrmIubTransportLoadParameters 3 RNC <NodeBConfClass>- none system_restricted Radio Call Admission Control IRM N.A. BitString 4 4 1111 27740 Iub load in iRM UA4.2
Value 0: QoS not to be taken in account.Value to be taken account in the next Iub
<IrmIubTransportLoadParameters>
Transport Load measurement
This parameter indicates how the BTS reports Local Cell Group to RNC (via
NBAP)
This parameter indicates how the base Band resources can be shared on CEM
iRMLCGReportMode BTSEquipment 0 BTS <BTSEquipment> critical system_restricted BTS CEM Management between 2 Local Cell Groups:
N.A. Enumerate separatedPool 33018 D-BBU resource pooling between frequencies UA5.0
Possible value
0: separatedPool: each of the 2 LCG are reserved wi
This parameter is used for de-synchronizing RB reconfiguration as iRM pre-
irmPreemptionColorCheckingTimer IrmPreemption 3 RNC <RadioAccessService>-<IrmPreemption> none expert_tuning Radio Load Management Pre-emption ms Integer 20 3600000 60000 25075 iRM Pre-emption UA4.1
emption is played.
<RadioAccessService>-<DedicatedConf>- Bitmap of QoS to be taken in account for the iRM Preemption Iub Transport Load
IrmPreemptionIubTransportLoadP
irmPreemptionIubLoadQos 3 RNC <NodeBConfClass>- none expert_tuning Radio Load Management Pre-emption computation.Bit i corresponds to QoS i.Value 1: QoS to be taken in account; N.A. BitString 4 4 1111 27740 Iub load in iRM UA4.2
arameters
<IrmPreemptionIubTransportLoadParameters> Value 0: QoS not to be taken in account.
Overload level above which the RNC does not perform any iRM preemption.
a. When the overload level called
<RadioAccessService>-<IrmPreemption>-
irmPreemptionOverloadLevelOk OverloadManagement 3 RNC none system_restricted Radio Load Management Pre-emption IRM_Preemption_OV_State<irmPreemptionOverloadLevelOk, then RNC has a N.A. Integer 1 5 1 25075 iRM Pre-emption UA4.1
External Document <OverloadManagement> Page 23 Alcatel-Lucent
nominal behavior for IRM preemption.
b. When the overload level called IRM_Pre
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
is3G2GRedirectOnCellLoadAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Accessibility 3G2G RRC Redirection Enables the feature when the Rach concerns a CS speech call emergency or not N.A. Boolean FAUX 34480 3G/2G RRC Redirection based on Cell Load UA7.1
is3G2GRedirectOnCellLoadAllowedForEmergency RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Accessibility 3G2G RRC Redirection Enables the feature when the Rach concerns a CS speech call emergency N.A. Boolean FAUX 34480 3G/2G RRC Redirection based on Cell Load UA7.1
Enables the feature when the Rach concerns a UE with a release strictly below
is3G2GRedirectOnCellLoadAllowedForR99AndR5 FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Accessibility 3G2G RRC Redirection N.A. Boolean FAUX 34480 3G/2G RRC Redirection based on Cell Load UA7.1
R6
Flag allowing full control of the BTS from 3G side. This flag is only relevant in
case of SUM Controller into a 2G/3G compatible Bts.
3G only MC-TRX 900MHz w/o dependency to
is3GControlModeAllowed BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS MC-TRX N.A. Boolean FAUX 116647 UA8.1
2G
If true: this is the specific case, where Bts is controlled by 3G side with Hw
supervision sub-contracted to a SUM contr
Same priority can be configured for inter-frequency and inter-RAT handover.
Most UEs need compressed mode for the simultaneous activation of both inter-
is3GHandoverPreferred FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility [HHO][iMCTA] N.A. Boolean VRAI 34224 IF / IRAT Measurements evolution UA7.1
frequency and inter-RAT measurements. This simultaneous compressed mode
may not be possible in certain
Same priority can be configured for inter-frequency and inter-RAT handover.
Most UEs need compressed mode for the simultaneous activation of both inter-
is3GHandoverPreferred NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Mobility [HHO][iMCTA] N.A. Boolean VRAI 34224 IF / IRAT Measurements evolution UA7.1
frequency and 2G inter-RAT measurements. This simultaneous compressed
mode may not be possible in certa
Same priority can be configured for inter-frequency and inter-RAT handover.
Most UEs need compressed mode for the simultaneous activation of both inter-
is3GHandoverPreferred NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Mobility [HHO][iMCTA] N.A. Boolean true 100894 UMTS to LTE Handover LR14.2
frequency and 2G inter-RAT measurements. This simultaneous compressed
mode may not be possible in certa
This parameter indicates whether 3G layer is preferred or not when 3G and other
<RadioAccessService>-<DedicatedConf>-
RAT have the same iMCTA priority during Forced HO (shutdown) procedure. no:
is3GHandoverPreferredForShutdown ForcedHoConf 3 RNC <ShutdownConfClass>-<EnhancedShutdownConf>- none customer_setting Radio Power Management Shutdown N.A. Enumerate useNominalConf 106905 Node B Soft Shutdown Evolution UA8.1
means that 3G is not preferred. yes: means that 3G is preferred.
<ForcedHoConf>
useNominalConf: means that the RNC
is3Gto2GConversationalCallRedirectOnRrcEstabFailAllo Enable/disable the redirection from 3G to 2G for Mobile Originated intelligent Multi-Carrier Traffic Allocation
RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility RRC Redirection N.A. Boolean FAUX 29415 UA4.0
wed Conversational calls when rrcConnection establishment fails (iMCTA)
This parameter allows to activate/desactivate the redirection to 2G of the
is3Gto2GRedirectForEmergencyAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility RRC Redirection N.A. Boolean FAUX 34151 Immediate Handover of Emergency calls UA6.0
Emergency Calls
Activate or deactivate the support of the 3G to 3G Handover with IuR (SRNS
SRNS Relocation UE not
is3Gto3GWithIurAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility Relocation “UE not
N.A. Boolean FAUX 18880 SRNS Relocation with Iur UA5.0
involved
involved”) by the RNC.
Hard Handover Inter-RNC Inter-Frequency
is3Gto3GWithoutIurAllowedForCS RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility [HHO][InterRnc] This parameter controls hard handover to a 3G cell for CS services. N.A. Boolean FAUX 17569 UA3.0
without Iur
Hard Handover Inter-RNC Inter-Frequency
is3Gto3GWithoutIurAllowedForPS RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility [HHO][InterRnc] This parameter controls hard handover to a 3G cell for PS services. N.A. Boolean FAUX 17569 UA3.0
without Iur
is64QamAllowedForUeCategory HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio HSDPA 64 QAM This parameter provides a flag if UE Category supports DL 64 QAM. N.A. BitString 64 64 0 34386 64-QAM for HSDPA UA7.0
is6SectorsNodeb RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Mobility [SHO] Indicates whether the 6 sectors softer HO is supported by the RNC N.A. Boolean VRAI 33970 6 sectors softer HO UA6.0
Activation flag to force the use of 7-bit LI (Length Indicator) size regardless of
actual RLC PDU size.
is7BitLiAlwaysUsedForUlRlcFlexibleMode EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_init Radio Synchronisation Radio synchronisation If false, RNC CallP can dynamically set the LI size (15-bit or 7-bit) based on the N.A. Boolean false 89563 Enhanced L2 for Uplink LR13.3
maximum RLC PDU size.
If true, 7-bit LI size shall be always stati
This parameter is an activation flag which activates/ deactivates automatic trigger
isAcbForRrcFilteringAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Call Admission Control CAC for ACB feature in conjunction with parameter isExcludedFromAutomaticAcb set N.A. Boolean false 127550 Traffic Filtering in Cell Overload LR13.1
to False
This parameter is an activation flag which activates/ deactivates automatic trigger
isAcbForRrcFilteringAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Call Admission Control CAC N.A. Boolean false 127550 Traffic Filtering in Cell Overload LR13.1
for ACB feature
The parameter defines whether Data forwarding for Real Time lossless SRNS
isActDataForwardOnSrns RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Unused Boolean FAUX 33798 Data forwarding for Real Time PS HO Cancelled
relocation is activated or not.
<RadioAccessService>-<RlcPerformanceConf>-
isAdaptiveRlcStatusFilterAllowed AdaptiveRlcStatusFilterConf 3 RNC none system_restricted Radio Protocols RLC ASF Globally enable/disable the RLC adaptive status filter feature N.A. Boolean VRAI Q00834365 Adaptative RLC Status Filter UA4.1
<AdaptiveRlcStatusFilterConf>
<RNC>-<LocationServices>- Controls if the AGPS positioning method is allowed for low delay location Enhancement of UTRAN positionning for 'Low
isAgpsAllowedForLowDelayRequests CommercialLocationServices 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 34406 UA7.1
<CommercialLocationServices> requests in addition to delay tolerant requests for non-emergency clients. Delay' location requests
<RNC>-<LocationServices>- Controls if the AGPS positioning method is allowed for low delay location Enhancement of UTRAN positionning for 'Low
isAgpsAllowedForLowDelayRequests EmergencyLocationService 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 34406 UA7.1
<EmergencyLocationService> requests in addition to delay tolerant requests for emergency clients. Delay' location requests
If this parameter is TRUE, then the RNC gives priority to blind HO vs.
<RadioAccessService>-<DedicatedConf>-
measurement-based HO as part of Forced HO procedure if iMCTA BHO feature
isAlarmBhoForShutdownPreferred ForcedHoConf 3 RNC <ShutdownConfClass>-<EnhancedShutdownConf>- none customer_setting Radio Power Management Shutdown N.A. Boolean FAUX 106905 Node B Soft Shutdown Evolution UA8.1
is enabled in the concerned cell and even if Alarm BHO is not active. If this
<ForcedHoConf>
parameter is set to FALSE, then t
<RadioAccessService>-<DedicatedConf>-
isAlarmGenerated AutoSwitchOffConfClass 3 RNC none customer_setting Radio Power Management SwitchOff Indicates if an alarm shall be generated in case of auto switch off N.A. Boolean FAUX 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass>
This parameter controls the activation of the feature “Alarm HHO based on UE Tx
isAlarmHhoUeTxPwrAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility [HHO] N.A. Boolean FAUX 33331 Alarm HHO based on UE TX Power UA7.1
Power”. This feature doesn't apply to E-DCH calls.
<RadioAccessService>-<RlcConfClass>-
isAlternativeEbitAllowed DlRlcUMode 3 RNC none system_restricted Radio Protocols [RLC][Umode][DL] Activate or deactivate the support of Rel-6 RLC functionality “Alternative Ebit” N.A. Boolean FAUX 34378 Baseline for VoIP LR Future
<DlRlcUMode>
<RadioAccessService>-<RlcConfClass>-
isAlternativeEbitAllowed UlRlcUMode 3 RNC none system_restricted Radio Protocols [RLC][Umode][UL] Activate or deactivate the support of Rel-6 RLC functionality “Alternative Ebit” N.A. Boolean FAUX 34378 Baseline for VoIP LR Future
<UlRlcUMode>
This parameter allows Alternative MBR to be used in RAB matching algorithm
isAlternativeMbrUsedAsGbr RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call management RAB Negotiation N.A. Boolean FAUX 31039 PS Core Network requested RAB modification UA6.0
when PS modification feature is activated
This parameter enables/disables the support of Alcatel Lucent Proprietary RLC
isAluTimerBasedSduDiscard RlcConfClass 3 RNC <RadioAccessService>-<RlcConfClass> none customer_setting Radio Protocols RLC SDU discarding mechanism. If isAluTimerBasedSduDiscard is set to true then N.A. Boolean FAUX 81204 Dual Cell HSDPA operation UA7.1.2
RLC SDUs that has not been transmitted are discarded.
isAlwaysOnAllowed AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none customer_init Radio PS Call management Always-on This parameter indicates if the procedure Always on is allowed N.A. Boolean FAUX 33565 UA06 Always-On developments UA6.0
This parameter determines the behaviour of each PS I/B Radio Bearer when the
always on downsize is triggered.
Always On: User management with two-step
isAlwaysOnAllowed DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none customer_setting Radio PS Call management Always-on It can take the following values:
N.A. Enumerate disabled 13473 UA2.0
downsizing
- Degraded2AlwaysOnOnly means that the downsize is allowed and the target
radio bearer is the one determined
isAlwaysOnAllowed DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio PS Call management Always-on This parameter indicates if the DlUserService is eligible to Always-On. N.A. Boolean FAUX 33565 UA06 Always-On developments UA6.0
This parameter determines the behaviour of each PS I/B Radio Bearer when the
always on downsize is triggered.
Always On: User management with two-step
isAlwaysOnAllowed UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none customer_setting Radio PS Call management Always-on It can take the following values:
N.A. Enumerate N.A. 13473 UA2.0
downsizing
- Degraded2AlwaysOnOnly means that the downsize is allowed and the target
radio bearer is the one determined
isAlwaysOnAllowed UlUserService 3 RNC <RadioAccessService>-<UlUserService> none customer_setting Radio PS Call management Always-on This parameter indicates if the UlUserService is eligible to Always-On. N.A. Boolean FAUX 33565 UA06 Always-On developments UA6.0
This parameter allow the operators to activate/deactivate the AO feature for UE
having interactive RAB
isAlwaysOnAllowedForSigIndOnRab AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none customer_setting Radio PS Call management Always-on Boolean FAUX 108389 Direct PCH to DCH Transition UA8.1
with Signalling Indication (SI) IE is set to ON (SI=ON). If this paramter is set to
false then existing implementation will be followed.
isAmrMultiModeAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Speech Call Management AMR Allows to enable/disable the feature AMR Multi Mode N.A. Enumerate disabled 18717 AMR Rate Adaptation UA5.0
To allow OA&M controllable activation/deactivation of the feature 32647 "AMR-
isAmrMultiModeForIuUpV1Allowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management AMR N.A. Boolean FAUX 34216 High speech capacity with AMR monorate UA6.0
NB multi-mode support for Iu UP V1"
isAmrMultiModeSetupAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Speech Call Management AMR Allows to enable/disable the feature AMR Multi Mode per cell N.A. Boolean FAUX 18717 AMR Rate Adaptation UA5.0
isAmrRateControlDuringTheCallAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Speech Call Management AMR Global activation flag for AMR Rate Control feature N.A. Boolean FAUX 27805 AMR mode change during the call UA5.0
isAmrRateControlOnDlPowerLoadAllowed DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 27805 AMR mode change during the call UA6.0
isAmrRateControlOnDlPowerLoadAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 27805 AMR mode change during the call UA6.0
isAmrRateControlOnIubDsLoadAllowed DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 32687 AMR mode change during the call - evolution UA6.0
isAmrRateControlOnIubDsLoadAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 32687 AMR mode change during the call - evolution UA6.0
isAmrRateControlOnUlCellLoadAllowed DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 27805 AMR mode change during the call UA6.0
isAmrRateControlOnUlCellLoadAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 27805 AMR mode change during the call UA6.0
To allow OA&M controllable activation/deactivation of the feature 27804 "AMR
isAmrRbSelectionAtAdmissionAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management AMR N.A. Boolean FAUX 27804 AMR RAB selection at admission (load) UA6.0
RAB selection at admission (load)"
Allows to enable/disable the selection of AMR low rate codec sets based on DL
isAmrRbSelectionV2AtAdmissionAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Speech Call Management AMR N.A. Boolean FAUX 34403 AMR Code set 2 with TrFO UA7.0
OVSF code load and OLS in the RNC for voice calls using IuUP V2.
Allows to enable/disable the selection of AMR low rate codec sets based on DL
isAmrRbSelectionV2AtAdmissionAllowedInCell FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Speech Call Management AMR N.A. Boolean VRAI 34403 AMR Code set 2 with TrFO UA7.0
OVSF code load and OLS in the cell for voice calls using IuUP V2.
isAmrWbAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Speech Call Management AMR Allows to enable/disable the feature AMR Wide Band N.A. Boolean FAUX 27803 Wideband AMR - UTRAN UA5.1
This parameter is an activation flag which activates/ deactivates the traffic filtering
isAoUpsizeFilteringAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Call Admission Control CAC N.A. Boolean false 127550 Traffic Filtering in Cell Overload LR13.1
capability to filter out Cell Update messages on cell level
This parameter is an activation flag which activates/ deactivates the traffic filtering
isAoUpsizeFilteringAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Call Admission Control CAC N.A. Boolean false 127550 Traffic Filtering in Cell Overload LR13.1
capability to filter out Cell Update messages
isAttachAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_tuning Radio Accessibility Call Establishment This parameter indicates if the Attach procedure is allowed. N.A. Boolean VRAI 0 none UA2.1
isAutomaticSwitchOff FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management SwitchOff Indicates if automatic switchoff is configured on this FDDCell N.A. Boolean FAUX 34396 Automatic Carrier Switchoff UA7.1
Activation flag for controlling the 100508/123989 UTRAN Self Optimisation (cell
overload) feature on an RNC-wide basis. If this flag is set to False, then all UTRAN Self Optimisation (CPICH auto
isAutoPcpichAdjAllowed RadioAccessService 3 RNC <RadioAccessService> partial customer_init Radio Power Management [Common Channels] N.A. Boolean false 123989 LR Future
UTRAN Self Optimisation (cell overload) is inhibited on this RNC. If this flag is set adjustment)
to True, t
This parameter indicates if backhaul daisy chaining is activated on the NodeB.
Daisy chaining is a feature in which up to three BTS share a single backhaul link,
isBackhaulDaisyChainingActivated IpRan 3 BTS <BTSEquipment>-<IpRan> none customer_setting BTS ATM being daisy-chained using one port for backhaul and another one for the dropped N.A. Boolean false 100791 BTS daisy chaining through the nodeB LR13.1
traffic.
This
isBatterySavingAllowed CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial customer_init Radio Broadcast Services CBS This parameter is used to enable the battery saving activation in Cbs feature N.A. Boolean false 134302 CBS enhancements for UE battery savings LR13.1
External Document Page 24 Alcatel-Lucent
defines whether the RNC shall provide distribution counters for the uplink and
isBlerDistributionReportingEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Counters N.A. Boolean FAUX 34695 Distribution Counters for UL/DL BLER UA7.0
downlink block error rates on R99 traffic channels
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Flad used to enable (value TRUE)/disable (value FALSE) the UE to be kept on ATT KPI parity - CAC failures during AO
isCacFailureRollbackEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Call Admission Control Always-on CAC Fail N.A. Boolean FAUX 78609 UA6.0
CS+PS0/0 or Cell_FACH during an AO Upsize procedure resulting in CAC failure. upsizing and CFN activation time calculation
Allows the UE to remain in PCH in case of CAC Failure upon direct transition from
isCacFailureRollbackEnabledForPchToCellDch RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Unused N.A. Boolean FAUX 74961 Always On Developements during CAC Failure Cancelled
PCH to Cell DCH.
isCacOnGbrEdchAllowed BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Call Admission Control This parameter enables or disables the CAC for E-DCH GBR service. N.A. Boolean VRAI 30742 MBR handling in the HSUPA Scheduler UA7.1.2
Allows to enable the feature Call Establishment Cause on cell basis For a set On-
isCallEstabCausePerCellBasisActivated FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Call Admission Control N.A. Boolean FAUX 0 none UA4.2
Line, new value to be taken in account after new service establishment.
Enables/disables the use by the RNC of UDP for streaming Call Trace data to the
Trace Collection Entity (TCE).
isCallTraceDataUdpStreamingToTceEnabled CallTraceConfClass 0 RNC <RNC>-<CallTraceConfClass> partial system_restricted Radio Call Trace N.A. Boolean false 162427 LRCE 3G Call Trace (End-to-End) LR Future
This parameter is significant only for LRCE / not significant for RNC 9370.
For LRCE this parameter is expected to be set and to remain set to
isCbsSerialNumberHandlingActivated CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial customer_init Radio Broadcast Services CBS If set to TRUE, activate the handling of the CBS Serial Number. N.A. Boolean false 134302 CBS enhancements for UE battery savings LR13.1
When true, CCP transport is terminated on the CCM that performs appropriate
isCCPCentralized BTSEquipment 0 BTS <BTSEquipment> critical customer_setting BTS CCP Boolean FAUX 111451 Inter-CEM Call migration (iBTS) LR Future
routing of NBAP-d messages between RNC and CEM..
isCdma1xHoAllowed DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Mobility [HHO][CDMA] Indicates if the DlUserService is eligible to1xCdma handover N.A. Boolean FAUX 33853 Support of WCDMA to CDMA Handover UA6.0
isCdma1xHoAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility [HHO][CDMA] N.A. Boolean FAUX 33853 Support of WCDMA to CDMA Handover UA6.0
isCdma1xHoAllowed UlUserService 3 RNC <RadioAccessService>-<UlUserService> none customer_setting Radio Mobility [HHO][CDMA] Indicates if the UlUserService is eligible to1xCdma handover N.A. Boolean FAUX 33853 Support of WCDMA to CDMA Handover UA6.0
For the CellCapabilityContainer IE, indicates if the first bit of the IE is the
isCellCapabilityContainerFirstBitTheRightMostBit NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Mobility [HHO][CDMA] rightmost bit. False = current implementation (9370). True = ex-Lu and Ericsson N.A. Boolean FAUX 33853 Support of WCDMA to CDMA Handover UA6.0
RNCs
This parameter allows to activate the feature HSDPA dynamic downlink code tree
management
<RadioAccessService>-<DedicatedConf>-
isCellHsPdschDynamicManagementActive HsdpaCellClass 0 RNC partial customer_setting Radio HSDPA Codes True: HSDPA dynamic downlink code tree management feature is activated at N.A. Boolean FAUX 29800 Dynamic DL Code Tree Mgt For HSDPA UA5.0
<HsdpaCellClass>
fddcell level
False: HSDPA dynamic downlink code tree management feature is not activate.
Allows the Cellid to be included in RRC Active Set Update and Radio Bearer Merge 32417 (Support of Cell id in some RRC
isCellIdInRrcAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Protocols N.A. Boolean FAUX 33854 UA6.0
Reconfiguration messages. procedures) into mainstream
isCellIdRttAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Location Services Defines if the CellId/RTT is allowed for that cell. True means it is allowed. N.A. Boolean FAUX 24089 Enhanced Cell Coverage positioning with RTT UA6.0
Defines if the CellId/RTT method can be applied, if the primary cell is controlled
isCellIdRttAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Location Services N.A. Boolean FAUX 24089 Enhanced Cell Coverage positioning with RTT UA6.0
by this neighbour RNC
<RNC>-<LocationServices>- This attribute indicates whether the RNC shall support the cell id RTT method of
isCellIdRttAllowed SasCentricModeService 3 RNC none customer_init Transport IP Boolean false 120416 Iu-PC interface enhancement LR13.1
<SasCentricModeService> positioning when operating in SAS centric mode
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<AccessSession>-
isCellIdRttEnabled 0 RNC partial customer_setting Radio Call Trace Indicates if “Cell-ID + RTT” UE positioning method is allowed. N.A. Boolean FAUX 34582 UE positionning information to CTg and CTb UA8.1
ce <UePositionMeasConfigForCallTrace>
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<GeographicalSession>-
isCellIdRttEnabled 0 RNC partial customer_setting Radio Call Trace Indicates if “Cell-ID + RTT” UE positioning method is allowed. N.A. Boolean FAUX 34582 UE positionning information to CTg and CTb UA8.1
ce <UePositionMeasConfigForCallTrace>
Indicates if the CellId/RTT method when used for Location services shall also
attempt to obtain and subsequently use RTT results for any Radio Links which
isCellIdRttSupportedOverIurAllowed LocationServices 3 RNC <RNC>-<LocationServices> none customer_init Radio Call Trace N.A. Boolean FAUX 117014 RTT support over IuR UA8.1
are present on NodeBs under the control of a Peer RNC. If FALSE, then only
RTT results obtained for
Indicates if the Cell-Id/RTT method when used for Call Trace periodic Location
CallTracePeriodicLocationService <RNC>-<LocationServices>- services shall also attempt to obtain and subsequently use RTT results for any
isCellIdRttSupportedOverIurEnabled 3 RNC partial customer_init Radio Call Trace N.A. Boolean false 117014 RTT Support Over Iur UA08.1
s <CallTracePeriodicLocationServices> Radio Links which are present on Node-Bs under the control of a Peer RNC. If
FALSE, then only RTT
Indicates if the CellId/RTT method when used for Commercial Location services
<RNC>-<LocationServices>- shall also attempt to obtain and subsequently use RTT results for any Radio Links
isCellIdRttSupportedOverIurEnabled CommercialLocationServices 3 RNC none customer_setting Radio Call Trace N.A. Boolean FAUX 117014 RTT support over IuR UA8.1
<CommercialLocationServices> which are present on NodeBs under the control of a Peer RNC. If FALSE, then
only RTT results ob
Indicates if the CellId/RTT method when used for Emergency Location services
<RNC>-<LocationServices>- shall also attempt to obtain and subsequently use RTT results for any Radio Links
isCellIdRttSupportedOverIurEnabled EmergencyLocationService 3 RNC none customer_setting Radio Call Trace N.A. Boolean FAUX 117014 RTT support over IuR UA8.1
<EmergencyLocationService> which are present on NodeBs under the control of a Peer RNC. If FALSE, then
only RTT results obt
This parameter allows to not impact the cell in case of TMA failure on both
isCellImpactOnTmaFailure AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none customer_setting BTS Unused N.A. Boolean VRAI 79305 d2U support of commercial ATT TMAs Cancelled
RXPath for bypass TMA
This parameter controls sending of cell load information IE in 2G handover Unified RRM Step 2 : Cell Load information
isCellLoadInformationSendingAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility [HHO][3G2G] N.A. Boolean FAUX 33326 UA6.0
messages exchange between 2G and 3G
Pre-emption process for DCH and
isCellPreemptionAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Load Management Pre-emption Activate/deactivate preemption process for DCH and HSDPA/HSUPA in this Cell N.A. Boolean FAUX 33322 UA6.0
HSDPA/HSUPA
Activate/deactivate preemption process for Code on Power CAC failures in this Pre-emption process for DCH and
isCellPreemptionCodePowerCacFailureAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Load Management Pre-emption N.A. Boolean FAUX 33322 UA6.0
FddCell HSDPA/HSUPA
Pre-emption process for DCH and
isCellPreemptionIubCacFailureAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Load Management Pre-emption Activate/deactivate preemption process for Iub CAC failures in this FddCell N.A. Boolean FAUX 33322 UA6.0
HSDPA/HSUPA
Pre-emption process for DCH and
isCellPreemptionNbapCacFailureAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Load Management Pre-emption Activate/deactivate preemption process for NodeB CAC failures in this FddCell N.A. Boolean FAUX 33322 UA6.0
HSDPA/HSUPA
Allow using wait time in cell update confirm for UE in PCH state upon CAC failure
isCellUpdateWaitTimeForPchUeAllowed ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none system_restricted Radio PS Call management Always-on Boolean FAUX 26673 URA_PCH UA5.0
instead of releasing the RRC connection
This parameter indicates if the UL and DL CEM load & colors are computed and
integrated in UL and DL cell colors.
isCEMColourCalculationEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Call Admission Control IRM
N.A. Boolean FAUX 27741 CEM load in iRM UA5.0
TRUE: feature activated; UL and DL CEM colors are calculated.
FALSE: feature not activated; The calculation of UL and DL CEM colors is
The CEM load based on DCH load is not relevant to establish a service in a cell
which may be mapped on DCH or HSPA (with SRB). This parameter allows
isCEMLoadUseRestrictedAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility [HHO][iMCTA] applying this filtering. Boolean FAUX 34437 Enhanced iMCTA UA7.0
•If IsCEMLoadUseRestrictedAllowed = TRUE, the CEM ul and dl load indicators
are n
This parameter defines whether the CEM model is valid in Downlink or if the
default DL CEM color should be used instead. If
<RadioAccessService>-<DedicatedConf>-
isCEMModelValidForDlColour NodeBConfClass 3 RNC none system_restricted Radio Call Admission Control IRM isCemColorCalculationEnabled=false, this parameter is useless.
N.A. Boolean FAUX 27741 CEM load in iRM UA5.0
<NodeBConfClass>
TRUE: Computed DL CEM color is integrated in DL Global cell color
This parameter defines whether the CEM model is valid in Uplink or if the default
UL CEM color should be used instead. If isCemColorCalculationEnabled=false,
<RadioAccessService>-<DedicatedConf>-
isCEMModelValidForUlColour NodeBConfClass 3 RNC none system_restricted Radio Call Admission Control IRM this parameter is useless.
N.A. Boolean FAUX 27741 CEM load in iRM UA5.0
<NodeBConfClass>
TRUE: Computed UL CEM color is integrated in UL Global cell color u
isCftEnabled RNCSession 0 RNC <RNC>-<ObjectTrace>-<RNCSession> partial customer_setting Radio Call Trace CFT Activation Flag N.A. Boolean FAUX 34183 Call Failure Trace Reasons Addition UA6.0
This parameter enables/disables the change of the Service Handover criterion of
isChangeGsmIratHoCriterionAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility [HHO][3G2G] CS voice calls for UMTS to GSM handover from 'should' to 'should not' if the UE N.A. Boolean FAUX 34230 Inter-RAT Handover developments UA6.0
is involved in an active PS call.
Allow to differentiate the calculation of count-c with SFN from SRNC using 8bit (if
isCipheringCalValueValidForCfnOnly NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Protocols Ciphering flag=TRUE) and 12bit (if flag=FALSE) in case of SRNS relocation with UE not N.A. Boolean FAUX 0 none UA8.1
involved
Flag set to allow or not the usage of Compress Mode HLS while EDCH is
isCmHlsAllowedWithEdch EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio HSUPA [HHO][CM] N.A. Boolean FAUX 29840 Commercial Hsupa introduction UA5.0
configured.
Flag set to allow or not the usage of Compress Mode SF/2 with Gaps while E-
isCmSfo2AllowedWithEdch EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio HSUPA [HHO][CM] N.A. Boolean FAUX 29840 Commercial Hsupa introduction UA5.0
DCH is configured.
Allows to enable/disable the handling of incoming Iu rate
isCnInitiatedRateControlAllowed CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none customer_setting Radio Speech Call Management AMR control
N.A. Boolean VRAI 18717 AMR Rate Adaptation UA5.0
True = rate control handled, False = rate control ignored
isCommonEdchHsdpcchAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management FACH A cell-level activation flag for Common E-DCH HS-DPCCH sub-feature N.A. Boolean true 108103 Enhanced Cell Fach for DL and UL LR14.2
Compounding Neighbor list developments
isCompoundingCellListActivated RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility [SHO] Used to activate or inhibit the compounded list feature N.A. Boolean FAUX 33693 UA6.0
(Intra-Frequency)
This parameter enables/disables the preemption of PS services over DCH in case
of air interface congestion.
isCongestionDowngradeAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Load Management congestion control N.A. Boolean FAUX 34228 RRM developments UA6.0
isCongestionPreemptionAllowed and isIrmPreemptionAllowed shall not be set to
true at the same time
<BTSEquipment>-<IpRan>-
isContinuityCheckMessagesEnabled MaintenanceAssociation 3 BTS none customer_setting Transport Ethernet Continuity Check Messages enabled Boolean FAUX 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
isCoreSessionEmergencyCallTracingCapacityRealignme Indicates if emergency call CT capacity realignment to CallP capacity of the
CallTraceConfClass 0 RNC <RNC>-<CallTraceConfClass> critical expert_tuning Radio Call Trace N.A. Boolean false 106719 RNC Call Trace Capacity Realignment LR13.1
ntEnabled CoreSession / CTa session is enabled.
[Continuous Packet
isCpcDtxDrxAllowed CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none customer_setting Radio PS Call management CPC technical activation flag (per service) N.A. Boolean FAUX 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
[Continuous Packet
isCpcDtxDrxAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call management CPC DTX/DRX activation parameter N.A. Boolean FAUX 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
[Continuous Packet
isCpcDtxDrxModeAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio PS Call management Allow CPC DTX/DRX mode on this cell. N.A. Boolean FAUX 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
[Continuous Packet Allow CPC DTX/DRX mode on this Iur link (either as serving RNC or as drift
isCpcDtxDrxModeAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio PS Call management N.A. Boolean FAUX 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] RNC). Not used in UA07
[Continuous Packet Allow CPC DTX/DRX mode on this neighbouring cell, when the capability is not
isCpcDtxDrxModeAllowed RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio PS Call management N.A. Boolean FAUX 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] known from the neighbouring information given by the drift RNC. Not used in UA08
defines whether the RNC shall provide performance counters for CPICH EcN0 Distribution Counters For CPICH Rscp and
isCpichQualityReportingEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Counters N.A. Boolean FAUX 34694 UA7.0
and CPICH RSCP based on periodical UE measurements. EcNo
isCsRabModificationForSpeechAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Speech Call Management AMR Indicates if the CS Rab modification is allowed N.A. Boolean FAUX 27803 Wideband AMR - UTRAN UA5.1
This flag is defined for Korea customers when CSR equipements are deployed in
the RNC to ehance IntraRNC IFHHO performance. When its TRUE, ADM will
isCsrOperation RemoteFDDCell 0 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> partial system_restricted Radio Mobility [HHO][IntraFreq InterRnc] Boolean FAUX 0 none LR Future
bypass this remoteFddCells rncId checking against the SRNCs rncId, when
remoteFddCell is being mediated
External Document Page 25 Alcatel-Lucent
To allow OA&M controllable activation / deactivation of the feature 36247 at cell
isCsSpeechOverHspaAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Speech Call Management Voice over HSPA Enumerate notAllowed 36247 Cs Voice over HSPA LR15.1
level
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Allows RNC to send MAC-hs GBR (based on minBR configurable value) to the
isDlPowerSelfTuningForPsIbOnHsdpaEnabled NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_init Radio HSDPA GBR N.A. Boolean FAUX 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
drift RNC in order to activate the Dl Power self-tuning for PS I/B RAB on HSDPA
This parameter is are to activate / de-activate the DL RB adaptation” on a RNC RB adaptation based on traffic: DL and UL
isDlRbRateAdaptationAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call management RB Rate Adaptation N.A. Boolean FAUX 27330 UA4.2
basis with start @64kbit/s
This parameter indicates if this RB is elligible to the down link RB rate adaptation
algorithm.
RB adaptation based on traffic: DL and UL
isDlRbRateAdaptationAllowedForThisDlRbSetConf DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none customer_setting Radio PS Call management RB Rate Adaptation
N.A. Boolean FAUX 27330 UA4.2
with start @64kbit/s
It is only applicable for Interactive / Background PS RBs (#3, 6, 7, 9 & 10).
In addition, this algorithm does not apply to PS I/B 8k RB (#4).
This parameter indicates if the DlUserService is elligible to the down link RB rate
adaptation algorithm.
RB adaptation based on traffic: DL and UL
isDlRbRateAdaptationAllowedForThisDlUserService DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio PS Call management RB Rate Adaptation It is only applicable for Interactive / Background PS RABs including when PS I/B N.A. Boolean FAUX 27330 UA4.2
with start @64kbit/s
RABs are combined with CS speech or CS data.
In addition, this a
Indicates that the first Transport Channel of the RbSetConf is allowed to be used
as an Outer Loop Power Control Reference Transport Channel.
Power Control and Rate Matching
isDlReferenceTransportChannelAllowed DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Power Management Power Control N.A. Boolean VRAI 28040 UA4.2
enhancements
It is only applicable for DL RBs (# 0,1 ,2, 5, 11, 14, 15 & 16 ).
<RadioAccessService>-<RlcPerformanceConf>- Indicates whether DL RLC SDUs must be queued in sequence (FALSE) or are
isDlRlcOutOfSequenceAllowed OutOfOrderSduDeliveryConf 3 RNC none system_restricted Radio Unused not used N.A. Boolean FAUX 28042 Throughput KPI improvement LR Future
<OutOfOrderSduDeliveryConf> permitted to be out-of-sequence (TRUE).
This parameter enables the feature 98448 that allows Domain Specific Access
Manual Overload control at NodeB granularity
isDomainSpecificAccessClassBarringAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Call Admission Control ACB class barring, i.e. where UE are barred specifically for CS or Ps depending on N.A. Boolean false 98448 LR13.1
(Class barring enhancement)
operator choices instead of for any type of calls
isDrncCounterAtCellLevelAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Counters Global feature activation flag for feature 34697 N.A. Boolean FAUX 34697 DRNC Counters at Cell Level UA7.1
isDrncCounterAtCellLevelForNeighbRncAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Counters Controls the DRNC cell based counter pegging on a per Iur interface basis. N.A. Boolean FAUX 34697 DRNC Counters at Cell Level UA7.1
<RadioAccessService>-<DedicatedConf>- The flag indicates whether an eDRX operation can be interrupted by DL HS-
isDrxInterruptionByHsdschDataAllowed HsdschDrxInCellFachInfo 3 RNC none system_restricted Radio Power Management FACH N.A. Boolean false 121209 Enhanced UE DRX in CELL_FACH LR14.2
<HsdpaCellClass>-<HsdschDrxInCellFachInfo> DSCH data reception
This parameter enables/disables the support of Dual Cell per UE category within
isDualCellAllowedForUeCategory HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none system_restricted Radio HSDPA Dual cell the RNC. Bit 0 corresponds to HSDPA category 1. Bit 63 corresponds to HSDPA N.A. BitString 64 64 1,111E+17 81204 Dual Cell HSDPA operation UA7.1.2
category 64.
isDualCellWithMimoActivated FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio HSDPA Dual cell This parameter enables/disables the support of Dual Cell with MIMO for the cell N.A. Boolean false 111582 Dual Carrier with MIMO up to 84Mbps LR Future
The parameter enables/disables the support of Dual Cell with MIMO feature
isDualCellWithMimoAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio HSDPA Dual cell N.A. Boolean false 111582 Dual Carrier with MIMO up to 84Mbps LR Future
within the RNC
This parameter indicates whether dual paging is allowed in URA_PCH state or
isDualPagingAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Accessibility Paging N.A. Boolean FAUX 108388 Enhanced URA_PCH Paging Procedures UA7.1.2
not. This flag is ignored unless URA_PCH is allowed
isDynamicDeltaCfnCalculation RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Channels & Bearers Activation time Actviation Flag for the feature Dynamic Delta CFN N.A. Boolean FAUX 27034 Update of RRM parameters during SRLR UA6.0
This parameter allows or not the ability to perform Dynamic Mac-d PDU Size
isDynamicMacdPduSizeManagementAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSDPA Throughput N.A. Boolean FAUX 29799 MAC-d PDU Size Mgt For HSDPA UA6.0
Management on HS-DSCH RB.
isDynamicMacdPduSizeManagementAllowedForEdch RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSUPA Throughput allow to enable/disable 656 bit PDU in EDCH N.A. Boolean FAUX 34584 UL 656 PDU bits PDU UA7.1
isDynamicPo2Enabled DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Power Management Power Control This attribute controls the activation of the dynamic management of PO2. N.A. Boolean FAUX 34246 Power Control Enhancements UA6.0
If set to TRUE, the size of the Schedule Message (SM) is dynamically adjusted.
isDynamicScheduleMessageSizeActivated CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial customer_init Radio Broadcast Services CBS N.A. Boolean false 134302 CBS enhancements for UE battery savings LR13.1
newMsgCtchCount has to be set in order for this option to work.
This parameter activate/deactivate the use of SB block in the dynamic SIB
isDynamicSibAlgoWithSbAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Channels & Bearers SIB scheduling algorithm used to broadcast SIB on the Air interface. It has to be set N.A. Boolean FAUX 33819 Broadcast of SIB4 UA6.0
to true in order to broadcast SIB4, SIB12 and SIB19.
isEaiAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management FACH A cell-level activation flag for E-AI sub-feature N.A. Boolean true 108103 Enhanced Cell Fach for DL and UL LR14.2
This parameter indicates which twin cell should be influenced by the EcNo
iMCRA - traffic balancing at RRC connection
measurement in case the parameter ecNoThresholdForTwinCellAllowed <> -24.0.
isEcNoCheckFor3GTwinCellAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility RRC Redirection N.A. Integer 0 65535 <Null> 89857 establishment with Programmable Actions UA08.1
If the Cid of certain twin cell is included in this array, the blind HO would be
Matrix
measurment assisted for
If this parameter is set to True and ecNoThresholdForTwinCellSelection <> -24.0,
iMCRA - traffic balancing at RRC connection
then this parameter indicates if redirection to LTE will be measurements assisted
isEcNoCheckForLteTwinCellAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility RRC Redirection N.A. Boolean false 89857 establishment with Programmable Actions UA08.1
and the threshold is determined by the parameter
Matrix
ecNoThresholdForTwinCellSelection
isEdchAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_init Radio HSUPA E-DCH over Iur the support of EDCH over Iur per neighbouring RNC N.A. Boolean FAUX 30744 HSUPA Over Iur UA6.0
This parameter allows or not the ability to map a PS RB on E-DCH or not.
This flag does not impact the E-DCH configuration of radio cells.
isEdchAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSUPA Service
N.A. Boolean FAUX 29840 Commercial Hsupa introduction UA5.0
If that parameter is TRUE, then there shall be two sons MO: “Edch User Service”
and “Edch RNC Configuration” l
isEdchAllowed RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio HSUPA E-DCH over Iur Indicate if the FDD Neighbouring cell does support or not EDCH calls N.A. Boolean FAUX 30744 HSUPA Over Iur UA6.0
The parameters is used to activate the E-DCH congestion control algorithm inside
isEdchBandwidthLimitationAllowed BTSEquipment 3 BTS <BTSEquipment> none customer_init Radio HSUPA Iub BW Limitation N.A. Boolean FAUX 33332 Iub congestion control for e-DCH UA6.0
the NodeB
isEdchCellHighPerformance FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Throughput allow to enable/disable a cell to support 656 bit PDU in EDCH N.A. Boolean FAUX 34584 UL 656 PDU bits PDU UA7.1
Enables/disables fallback from HSUPA to DCH if compressed mode is required.
Never: Fallback is never attempted. If compressed mode activation fails then the
Defense mechanism for UEs not supporting
isEdchCMFallbackAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility call is continued without compressed mode. The call may drop if no handover is N.A. Enumerate never 34167 UA6.0
CM with HSPA
possible.
UE_depe
isEdchFastSirTargetDecreaseAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSUPA Power Control Enables/Disables the data inactivity based fast SIR target decrease mechanism.. N.A. Boolean false 121085 UL Power saving with E-DCH OLPC UA08.1
<RadioAccessService>-<DedicatedConf>- When a RAB is mapped on E-DCH with a TTI 2ms, this flag specifies if the
isEdchFpBundlingModeForEdchTti2msAllowed NodeBConfClass 3 RNC none system_restricted Radio HSUPA Scheduler N.A. Boolean FAUX 33330 2ms TTI For E-DCH UA6.0
<NodeBConfClass> NodeB shall bundle the E-DCH FP frame of 2ms into an FP frame of 10ms
Indicates if the feature PM29840 E-DCH Inter-frequency Mobility is allowed.If set
to FALSE no HHO from DCH to E-DCH will be allowed (however HHO from E-
isEdchHhoWithMeasAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA Mobility N.A. Boolean FAUX 29840 Commercial Hsupa introduction UA5.0
DCH to DCH and HHO from E-DCH to GSM are still allowed).Note: if
isEdchAllowed attribute of RadioAccess
Controlled EDCH feature activation conditions
- Prevents granting EDCH Services when a Drift RL exists.
isEdchIurRestrictionEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA E-DCH over Iur N.A. Boolean FAUX 80509 Support on OneBTS of 30744 HSUPA over Iur UA8.1
- Triggers EDCH/HS -> DCH/HS reconfiguration following 1A for Iur handover
isEnhancedCellFachForDlAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSDPA FACH RNC level feature activation flag for Enhanced CELL_FACH. N.A. Boolean FAUX Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
168710
Cell level feature activation flag for Enhanced CELL_FACH in UL (i.e. common E-
isEnhancedCellFachForUlAllowed EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio Power Management FACH N.A. Boolean false 108103 Enhanced Cell Fach for DL and UL LR14.2
DCH transmission), controlled by NodeB
Cell level feature activation flag for Enhanced CELL_FACH in UL (i.e. common E-
isEnhancedCellFachForUlAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Power Management FACH N.A. Boolean false 108103 Enhanced Cell Fach for DL and UL LR14.2
DCH transmission), controlled by RNC
RNC level feature activation flag for Enhanced CELL_FACH in UL (i.e. common E-
isEnhancedCellFachForUlAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Power Management FACH DCH transmission). N.A. Boolean false 108103 Enhanced Cell Fach for DL and UL LR14.2
This parameter is a flag at the RNC level to enable/disable feature for Direct PCH
isEnhancedDirectPchToDchAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio PS Call management Always-on N.A. Boolean false 159246 Direct PCH to DCH Transition Enhancements LR13.3
to DCH Transition Enhancements.
Cell level feature activation flag for Enhanced DRX in CELL_FACH state,
isEnhancedDrxAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Power Management FACH N.A. Boolean false 121209 Enhanced UE DRX in CELL_FACH LR14.2
controlled by RNC
RNC level feature activation flag for Enhanced DRX in CELL_FACH state
isEnhancedDrxAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Power Management FACH N.A. Boolean false 121209 Enhanced UE DRX in CELL_FACH LR14.2
Activation flag (on a per RNC basis) for 28436.1 sub-feature “Iur Backwards
Compatibility” - Enhancements to RNSAP Radio Link Setup / Radio Link Addition /
isEnhancedIurInterworkingAllowedOnDrnc RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols Iur N.A. Boolean FAUX 28436 Extension of DRNS Capabilities UA6.0
Radio Link Reconfiguration Prepare procedures (on DRNC). These
enhancements are applicable for inte
This parameters is used to To activate and deactivate the enhanced IUR RAB
configuration feature over IUR
isEnhancedIurRabConfigEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Protocols Iur N.A. Boolean FAUX 28436 Extension of DRNS Capabilities UA6.0
Activation flag (on a per RNC basis) for 28436.2 sub-feature “Iur Interoperability” -
Enhancements to RNSAP Dedicated Measurement Initiation / Reporting
isEnhancedMeasurementSupportAllowedOnDrnc RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Design N.A. Boolean FAUX 28436 Extension of DRNS Capabilities UA6.0
procedures (on DRNC). These enhancements are applicable for interworking with
any third party vendor o
This is an RNC level parameter which indicates if enhanced management of a
Multi-Service RAB call drop reduction
isEnhancedMultiServiceRabManagementAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Retainability Multi RAB multiservice RAB is allowed. If this flag is set to true then feature flag Boolean false 123648 LR Future
enhancement
isMultiServiceRabManagementAllowed must also be true.
The parameter indicates whether to enable enhance overload alarms triggering
isEnhancedOverloadAlarmDetailAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Unused Boolean FAUX 80676 Enhancement of RNC Overload Alarm Display Cancelled
on the RNC.
Cell level feature flag for Enhanced PCH.
isEnhancedPchAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Accessibility Paging OMC-R checking: isEnhancedPchlAllowed can not be set to TRUE if N.A. Boolean FAUX 120428 Enhanced PCH support for Qchat LR Future
isEnhancedCellFachForDlAllowed is not set to TRUE.
Allows to control the Node B / Cell level capability to support the feature
Enhanced PCH
isEnhancedPchAllowed HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none customer_setting Radio Accessibility Paging N.A. Boolean FAUX 120428 Enhanced PCH support for Qchat LR Future
OMC-R checking: isEnhancedPchlAllowed can not be set to TRUE if
isEnhancedCellFachForDlAllowed is not set to TRUE.
RNC level feature activation flag for Enhanced PCH.
isEnhancedPchAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Accessibility Paging OMC-R checking: isEnhancedPchlAllowed can not be set to TRUE if N.A. Boolean FAUX 120428 Enhanced PCH support for Qchat LR Future
isEnhancedCellFachForDlAllowed is not set to TRUE.
isFastDormancyAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call Management Always-on activation/deactivation of the fast dormancy procedure N.A. Boolean FAUX 97425 Fast Dormancy for Smartphone battery saving UA8.1
isFastL1SyncForECellFachAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management FACH Allow Activation of Fast L1 at Cell level for eFACH N.A. Boolean false 108103 Enhanced Cell Fach for DL and UL LR14.2
Evolution of Fast L1 synchro parameters for
isFastL1SynchronizationAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Synchronisation Radio synchronisation Allow Activation of Fast L1 QChat at cell level N.A. Boolean FAUX 119866 LR Future
QChat
Evolution of Fast L1 synchro parameters for
isFastL1SynchronizationAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Synchronisation Radio synchronisation Allow Activation of Fast L1 QChat at NeighbouringRNC level N.A. Boolean FAUX 119866 LR Future
QChat
Evolution of Fast L1 synchro parameters for
isFastL1SynchronizationAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Synchronisation Radio synchronisation Allow Activation of Fast L1 QChat at RNC level N.A. Boolean FAUX 119866 LR Future
QChat
Evolution of Fast L1 synchro parameters for
isFastL1SynchronizationAllowed RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio Synchronisation Radio synchronisation Allow Activation of Fast L1 QChat at Remote cell level N.A. Boolean FAUX 119866 LR Future
QChat
Activation flag (on a per Iur interface basis) for 28436.1 sub-feature “Iur
Backwards Compatibility” - Restrictions to RNSAP Radio Link Reconfiguration
isFlexentDrncInterworkingRestrictionEnabled NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none system_restricted Radio Protocols Iur N.A. Boolean FAUX 28436 Extension of DRNS Capabilities UA6.0
procedure (on SRNC). These restrictions are applicable for interworking with
Flexent DRNC whilst upgra
Activation flag (on a per RNC basis) for 28436.1 sub-feature “Iur Backwards
Compatibility” - Restrictions to RNSAP Radio Link Reconfiguration procedure &
isFlexentInterworkingUtranRestrictionEnabled RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols Iur N.A. Boolean FAUX 28436 Extension of DRNS Capabilities UA6.0
permitted RAB services (on SRNC). These restrictions are applicable for
interworking with Flexent DR
indicates whether Advanced IP QoS management is allowed
isFlexibleOperatorConfigurableSplitAllowed IpRan 0 BTS <BTSEquipment>-<IpRan> none customer_init Transport IP N.A. Boolean FAUX 79362 Flexible Operator Configurable Split IP Iub UA8.1
If this parameter is TRUE, then Forced 2G reselection functionality shall be
<RadioAccessService>-<DedicatedConf>-
isForced2gReselectionEnabled EnhancedShutdownConf 3 RNC none customer_setting Radio Power Management Shutdown executed as part of Enhanced Soft Shutdown procedure. The SMO N.A. Boolean FAUX 106905 Node B Soft Shutdown Evolution UA8.1
<ShutdownConfClass>-<EnhancedShutdownConf>
Forced2gReselectionConf must be instantiated.
This parameter indicates if the RemoteRadiohead supports 4 antennas ports. It is
isFourAntennasConfigured RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> critical system_restricted BTS RRH N.A. Boolean false 125576 RRH2x60-21 support of 2 sectors LR Future
relevant if the RemoteRadiohead is used in multi sectors mode.
<BTSEquipment>-<IpRan>-
isFrameDelayMeasurementEnabled MaintenanceAssociation 3 BTS none customer_setting Transport Ethernet Y.1731 Delay Measurement messages enabled N.A. Boolean FAUX 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
<BTSEquipment>-<IpRan>-
isFrameLossMeasurementEnabled MaintenanceAssociation 3 BTS none customer_setting Transport Ethernet Y.1731 Loss Measurement Continuity Check Messages enabled N.A. Boolean FAUX 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
To allow OA&M controllable activation/deactivation of the feature 29804 "GBR on
isGbrOnHsdpaAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSDPA Streaming N.A. Boolean FAUX 29804 GBR on HSDPA UA6.0
HSDPA"
isGeographicalSessionTracingCapacityRealignmentEna Indicates if CT capacity realignment to CallP capacity of the GeographicalSession
CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace N.A. Boolean false 106719 RNC Call Trace Capacity Realignment LR13.1
bled / CTg session is enabled.
Indicates if the RNC as SRNC is to indicate to DRNCs in RNSAP messages
Radio Link Setup Request that the related UE call is traced by the CTg session
isGeographicSessionDrncSyncEnabled CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace N.A. Boolean false 120498 UA09 Call Trace Developments LR13.1
and if the RNC as DRNC is to rely on this indication in RNSAP messages Radio
Link Setup Request to decide
Indicates if the RNC is to prevent generating partial CTg traces, e.g. requested
isGeographicSessionPreventPartialTracesEnabled CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace CTg C-Plane traces but without also requested CTg U-Plane traces or requested N.A. Boolean false 120498 UA09 Call Trace Developments LR13.1
CTg C-Plane traces but without also requested RDMs and/or NDMs.
<RNC>-<LocationServices>- This attribute indicates whether the RNC shall support the GLONASS method of
isGlonassAllowed SasCentricModeService 3 RNC none customer_init Transport IP N.A. Boolean false 120416 Iu-PC interface enhancement LR13.1
<SasCentricModeService> positioning when operating in SAS centric mode
isGsmCModeActivationAllowed DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Mobility Compressed Mode Indicates if compressed mode for GSM is allowed for this DL UserService. N.A. Boolean FAUX 25764 Compressed Mode Deactivation flags UA4.1
This parameter enables/disables the use of default configurations for inter RAT
isGsmIratHoDefaultConfigurationUsed RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Mobility [HHO][3G2G] N.A. Boolean FAUX 34230 Inter-RAT Handover developments UA6.0
handover from GSM to UMTS.
This parameter enables/disables the IRAT handover to the next best GSM cell if
isGsmIratHoToNextBestCellAllowed RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Mobility [HHO][3G2G] N.A. Boolean FAUX 34230 Inter-RAT Handover developments UA6.0
handover is not possible to the first cell due to overload.
This parameter allows using the R6 IE GSM Target Info List in the RRC
isGsmTargetInfoListIeAllowed ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none customer_init Radio Accessibility 3G2G RRC Redirection N.A. Boolean FAUX 34480 3G/2G RRC Redirection based on Cell Load UA7.1
Connection Reject message.
true: Favor LTE coverage in iMCTA table when iMCTA is called at the end of the
isHandoverToLteForCsFbPreferred FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility LTE CS fallback (CSFB) (trigger servivce) N.A. Boolean false 100894 UMTS to LTE Handover LR14.2
External Document Page 27 Alcatel-Lucent
false: No change of priority in IMCTA table
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
isHsServingCellChangeImprovAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio HSDPA Mobility indicates support of eSCC feature on this Iur link N.A. Boolean FAUX 83986 HS-DSCH serving cell change improvements LR Future
isHsServingCellChangeImprovAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSDPA Mobility indicates support of eSCC feature at RNC level N.A. Boolean FAUX 83986 HS-DSCH serving cell change improvements LR Future
isHsServingCellChangeImprovAllowed RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio HSDPA Mobility indicates support of eSCC feature on this neighbouring cell N.A. Boolean FAUX 83986 HS-DSCH serving cell change improvements LR Future
This parameter defines whether multiple HsxpaResources can be grouped in case
isHsxpaGroupingAllowed BTSEquipment 3 BTS <BTSEquipment> none customer_init BTS CEM Management CEM N.A. Boolean FAUX 34391 Multiple XCEM per carrier UA7.1.2
there is are enough xCEM for all provisioned resources.
Allows ability to share resources (DL power, OVSF codes) between HS-DSCH
isHsxpaR99ResourcesSharingOnCellAllowed FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial customer_setting Radio HSDPA Resource Sharing N.A. Boolean FAUX 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
and R99 calls in this cell.
Allows to enable/disable the broadcast of the flags HSDPA CellIndicator and E-
DCH CellIndicator within System Information Block Type5.
isHsxpaServiceIndicatorEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSDPA Service N.A. Boolean FAUX 32520 HSDPA and E-DCH service Indicator UA5.0
FALSE (0): the 2 flags are never transmitted in SIB 5,
TRUE (1): the flags can be transmitted in SIB 5, according to “
This parameter indicates if the cell must be reconfigured with HSXPA in case of
isHsxpaToBeReconfigured FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management SwitchOff N.A. Boolean FAUX 34396 Automatic Carrier Switchoff UA7.1
twin cell switch off.
isHziActivated RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Design Home Zone Indication Flag to activate or deactivate home zone indication N.A. Boolean FAUX 30070 UA05 Parameter evolutions UA5.0
This parameter indicates whether iCEM board type is allowed to be used as BB Parameter Class Evolution in UA08 & UTRAN
isICemAllowed BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS CEM Management N.A. Boolean VRAI 80685 UA8.1
resources in the BTS or not. model simplification
This parameter indicates whether online addition/deletion of PCM link to/from an
IMA Group is allowed or not. Parameter Class Evolution in UA08 & UTRAN
isImaPcmListOnlineModificationAllowed BTSEquipment 3 BTS <BTSEquipment> none customer_setting Transport ATM IMA N.A. Boolean FAUX 80685 UA8.1
This parameter should be set to False for iCCM. model simplification
true : Enable to release and redirect the UE to LTE at the end of the CS fallback
(CSFB). In case of CS+PS, flag isHandoverToLteForCsfbPreferred is checked to
isReleaseAndRedirectionForCsFbAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility LTE N.A. Boolean false 100894 UMTS to LTE Handover LR14.2
know if an HO is done instead of a release.
false :In case of CS+PS, iMCTA is called for service
When RNC UPlane detects a TRB RLC error, PS is released with a SRLR, not by
Multi-Service RAB call drop reduction for
isReleasePsOnRncDetectedTrbRlcErrorAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Retainability RRC Re-establishment RRE. isReleasePsOnRncDetectedTrbRlcErrorAllowed takes priority over N.A. Boolean FAUX 119418 UA8.1
Smartphone
rrcReestablishForSingleOrMultiService
The parameter is defined to indicate whether the SRB2 activated time point is
SRNS Relocation UE not SRNS relocation improvement(SRB#2 Act time
isRelocDrncSrb2Enabled RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Mobility separated from other SRBs or not in case of Drift RNC on UE not involved SRNS N.A. Boolean FAUX 80677 UA7.0
involved change)
relocation
When the UE is in DRNC, the confIds (HoConfClassId, MeasurementConfClassId,
AlarmPriorityTableConfClassId, CACPriorityTableConfClassId) to be used are HO parameters (HoConfClassId) configuration
isRemoteCellConfIdsEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility [HHO][InterRnc] N.A. Boolean VRAI 98451 UA8.1
determined by the conjuction of isRemoteCellConfIdsEnabled and at cell granularity when UE under a DRNC
isLatestConfIdInRemoteCellPreferred param
True means that RAN-INFORMATION-REQUEST Application Container for SON
Cell load exchange for I-RAT mobility from
isRimForSonTransferAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility LTE Transfer Application is allowed in the RNC (serving RAN). It’s the ability to N.A. Boolean false 155968 LR13.1
LTE
provide UTRAN cell load information.
True means that RAN-INFORMATION-REQUEST Application Container for SON
Cell load exchange for I-RAT mobility from
isRimForSonTransferFromLteActivated FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility LTE Transfer Application is activated in the cell. It’s the ability to provide UTRAN cell N.A. Boolean false 155968 LR13.1
LTE
load when requested by an eNB.
‘TRUE’ means that RAN-INFORMATION-REQUEST Application Container for
CS fallback enhancement from LTE to
isRimForUtraSiAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility LTE UTRA SI Application is allowed in the RNC. It’s the ability to provide UTRAN cell N.A. Boolean FAUX 115109 UA8.1
UMTS:enhanced Redirection
system information
External Document Page 30 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
isRlcFlexibleSizeForPsStrAllowed EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_init Radio Synchronisation Radio synchronisation Activation flag to use UL flexible RLC for PS Streaming radio bearers N.A. Boolean false 89563 Enhanced L2 for Uplink LR13.3
L2 improvements support (RLC & MAC-hs/e
isRlcFlexibleSizeForPsStrAllowed HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio HSDPA Flexible MAC-ehs/RLC flag to allow/forbid the use of RLC flexible mode on PS Streaming radio bearers N.A. Boolean VRAI 34388 UA7.0
S/W for improved RLC)
Activation of the RLC reconfiguration after a channel type switching related to
isRLCReconfigurationForChannelTypeSwitching HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none system_restricted Radio HSDPA Configuration N.A. Boolean VRAI 27932 HSDPA Step1 UA4.2
release or addition of another RAB
Activation of the RLC reconfiguration during a channel type switching between
DCH and EDCH.
isRlcReconfigurationForChannelTypeSwitchingEdch EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none system_restricted Radio HSUPA Configuration This parameter is to be applied during a channel type switching between from N.A. Boolean VRAI 29840 Commercial Hsupa introduction UA5.0
"anything" to EDCH
For RLC reconfiguration during a channel type switching between,
isRncRabModificationAllowed PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none customer_init Radio Channels & Bearers RAB negotiation This parameter enables/disables RAN initiated RAB modification. N.A. Boolean FAUX 34226 RNC initiated RAB modification UA6.0
• If this flag is FALSE, RNC will use ASN.1 rel-7 definition but with the condition
isRnsapCr1357Supported NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none system_restricted Radio Protocols RNSAP on UL DPDCH indicator For E-DCH Operation presence N.A. Boolean FAUX 36246 UA07 3GPP Standards compliance UA7.0
• If this flag is TRUE, RNC will then support the full CR 1357 description.
To allow OA&M controllable activation / deactivation of the feature 22845 per Robust Header Compression (ROHC - RFC
isRohcAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Protocols ROHC N.A. Boolean FAUX 22845 LR Future
neighbouring RNC 3095/4815)
Robust Header Compression (ROHC - RFC
isRohcAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Protocols ROHC To allow OA&M controllable activation / deactivation of the feature 22845 N.A. Boolean FAUX 22845 LR Future
3095/4815)
isRollbackToCellDchEnabledForPchToCellFachCacFailu Allows the UE to be moved to Cell DCH in case of CAC Failure upon transition
RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Unused N.A. Boolean FAUX 74961 Always On Developements during CAC Failure Cancelled
re from PCH to Cell FACH
isRollbackToCellFachEnabledForIdleToCellDchCacFailu Allows the UE to be moved to Cell FACH in case of CAC failure upon transition
RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Unused N.A. Boolean FAUX 74961 Always On Developements during CAC Failure Cancelled
re from Idle to Cell DCH
<RadioAccessService>-<OverloadInfo>- This parameter will be used to determine low priority signaling type (SMS)
isRrcCnxReqRejectSms Overload 3 RNC none customer_setting Radio Accessibility RRC Reject N.A. Boolean FAUX 98610 RRC Connection Attempts Filtering LR14.2
<RNCNodeOverloadControl>-<Overload> messages should be dropped during Major and Critical overloads.
isRrcConnRejRedirectAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Accessibility RRC Reject Allows Call Redirection via RRC Connection Reject N.A. Boolean FAUX 119403 RRC Connection Reject for SKT data Femto LR Future
isRrcEdchEvent1JAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA Mobility This flag enables/disables the configuration of event 1J N.A. Boolean FAUX 32076 E-DCH Macro Diversity Support UA6.0
This parameter is an activation flag that allows to take into account
isRrcFilteringAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Call Admission Control CAC N.A. Boolean false 127550 Traffic Filtering in Cell Overload LR13.1
csrArrivalCondition and csrFailureCondion in CarrierSelectionCondition
This parameter is an activation flag that allows to take into account
isRrcFilteringAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Call Admission Control CAC N.A. Boolean false 127550 Traffic Filtering in Cell Overload LR13.1
csrArrivalCondition and csrFailureCondion in CarrierSelectionCondition
Feature activation flag for inter-frequency redirection on RRC connection setup.
isRrcRedirectionInterFreq RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility RRC Redirection The redirection algorithm is configured on cell basis by parameter N.A. Boolean FAUX 75069 iMCTA improvement UA7.0
rrcRedirectionType
The parameter is feature activation flag at RNC level for RRC registration
isRrcRegistrationFilteringAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Accessibility RRC Reject N.A. Boolean FAUX 98610 RRC Connection Attempts Filtering LR14.2
filtering.
The parameter is feature activation flag at RNC level for RRC registration
isRrcRegistrationFilteringAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Accessibility RRC Reject N.A. Boolean false 98610 RRC Connection Attempts Filtering LR14.2
filtering.
isRrhAllowed RadioAccessService 0 RNC <RadioAccessService> critical customer_setting Radio Design RRH This parameter indicates if the RRH feature is allowed to a specific RNC N.A. Boolean VRAI 31784 6 sectors mixed configuration step1 UA5.0
This parameter indicates if the BTS does a correction of the RTWP before
reporting it to RNC in the NBAP COMMON MEASUREMENT REPORT
If the parameter is set to TRUE, the correction is:
isRtwpAdjustmentForRnc BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSUPA UL Radio Load -106.1 + (Rtwp_measured - rtwpReferenceOrSelfLearned)
N.A. Boolean VRAI 27745 UL Load Estimation UA5.0
Example
isRt
isRtwpReferenceSelfLearning BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio HSUPA UL Radio Load Permit to activate or the auto learning of the RTWP reference level N.A. Boolean VRAI 27745 UL Load Estimation UA5.0
Indicates if the neighbouring RNC supports the proprietary use of message/IE in
isSameProprietaryRnsapSupportedForCdmaHo NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Mobility N.A. Boolean FAUX 33853 Support of WCDMA to CDMA Handover UA6.0
RNSAP for WCDMA to CDMA HO feature
Defines if SAS Centric operation is the preferred mode. True means SAS Centric
isSasCentricOperationPreferred LocationServices 3 RNC <RNC>-<LocationServices> none customer_tuning Transport IP N.A. Boolean false 120416 Iu-PC interface enhancement LR13.1
is preferred
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<AccessSession>-
isSasCentricPositioningEnabled 0 RNC partial customer_setting Transport IP Indicates if SAS-centric UE positioning is allowed. N.A. Boolean false 120416 Iu-PC interface enhancement LR13.1
ce <UePositionMeasConfigForCallTrace>
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<GeographicalSession>-
isSasCentricPositioningEnabled 0 RNC partial customer_setting Transport IP Indicates if SAS-centric UE positioning is allowed. N.A. Boolean false 120416 Iu-PC interface enhancement LR13.1
ce <UePositionMeasConfigForCallTrace>
This allows the choice of how satellite information is sent to the UE for AGPS
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- assistance data. If TRUE, then the satellite information shall be prioritsed and
isSatellitePrioritisationAllowed 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 117731 AGPS optimization: Satellites prioritization UA08.1
gy <AGPSUeBasedLocationTechnology> sent in the order based on position in the sky. If FALSE, the satellite information
is found to
Switching between Video and Speech
isScudifAllowedForDrns NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Speech Call Management SCUDIF Indicates if NI-SCUDIF measurements functionality is allowed on DRNC N.A. Boolean FAUX 75071 UA7.1.2
(SCUDIF) - Network initiation
Indicate if the DL Scrambling Code is present. The IE shall be present if the PCH
isSecondScramblingCode SCCPCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH> partial system_restricted Radio Protocols N.A. Boolean FAUX 28016 3GPP compliant NBAP (multi-vendor) UA5.0
parameter is not present
If this parameter is TRUE, then the RNC shall ignore (i.e. do not take into
<RadioAccessService>-<DedicatedConf>-
account) the RANAP “Service Handover IE” (if enabled) when selecting the target
isServiceHoRanapIeIgnoredForShutdown ForcedHoConf 3 RNC <ShutdownConfClass>-<EnhancedShutdownConf>- none customer_setting Radio Power Management Shutdown N.A. Boolean FAUX 106905 Node B Soft Shutdown Evolution UA8.1
layer; this applies to the shutting down cell only and to the iMCTA alarm priority
<ForcedHoConf>
table only when
This parameter allows or not to activate the feature Service Priority
Management.
intelligent Multi-Carrier Traffic Allocation
isServicePriorityManagementEnable RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility [HHO][iMCTA] N.A. Boolean FAUX 29415 UA5.0
TRUE: feature activated
(iMCTA)
FALSE: feature not activated
<RadioAccessService>-<Imcta>-
ServiceForTrafficSegmentationPri
isServiceSegmentationTopPriority 3 RNC <ServiceSegmentationPriorityClass>- none customer_init Radio Mobility [HHO][iMCTA] Enable/disable traffic segmentation priority N.A. Boolean FAUX 33665 Multi-Layer developments UA6.0
ority
<ServiceForTrafficSegmentationPriority>
This parameter allows to activate the V3 sho initial power calculation
isShoLegInitialPowerAlgoEnabled RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Power Management [SHO] N.A. Boolean FAUX 21053 SHO leg initial power calculation enhancement UA3.0
enhancement feature.
Determines whether a oneshot intra-frequency measurement is transmitted on
isSib11IntraFreqOneShotAllowedPerCell FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Channels & Bearers SIB N.A. Boolean VRAI 34227 State transitioning developments UA6.0
SIB11 on a per-Cell basis
Indicates if the IE “Reporting information for state CELL_DCH” of SIB11 must be
filled.This IE configures intra-frequency measurement reporting for stage when
isSib11MeasReportingAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility [Measurement] UE enters state CELL_DCH until reception of the RRC Measurement Control N.A. Boolean FAUX 34227 State transitioning developments UA6.0
message.
If this flag i
Mobility between UMTS and LTE - Cell
isSib19Allowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility LTE SIB 19 activation in the RNC for upgrade and feature introduction reason N.A. Boolean FAUX 81436 UA8.1
Reselection
Feature activation flag for sib5PcpichPowerOffset attribute.
OneBTS parameters for Distributed Antenna
isSib5PcpichPwrActivated RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Configuration If set to true and sib5PcpichPowerOffset not equal 0, the feature will be activated N.A. Boolean false 127580 LR14.2
System
If set to false this feature will be inactived
isSierraCardFwFachIssue RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols RLC Reconfiguration RNC 9370 workaround activation for faulty Sierra Card Firmware in AT&T N.A. Boolean FAUX 0 none UA7.1
<RadioAccessService>-<DedicatedConf>- This parameter is a flag at the cell level to enable/disable carrying of signal traffic Signalling Traffic Management on CELL_FACH
isSignalingOverCellFachEnforced CacOnFachParam 3 RNC none expert_tuning Radio Power Management FACH N.A. Boolean false 127518 LR Future
<CacConfClass>-<CacOnFachParam> over CELL_FACH under cell loaded condition. Enhancement.
This parameter is a flag at the RNC level to enable/disable carrying of signal Signalling Traffic Management on CELL_FACH
isSignalingOverCellFachEnforced RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Power Management FACH N.A. Boolean false 127518 LR Future
traffic over CELL_FACH under cell loaded condition. Enhancement.
isSilentModeAllowed NodeB 3 RNC <RNC>-<NodeB> none customer_setting Radio Protocols Iub / Iur silent mode This parameter indicates if silent mode is allowed or not. N.A. Boolean FAUX 20542 Iub / Iur Silent Mode UA4.1
If this parameter is set to TRUE than the RNC is allowed to use simultaneous
compressed mode for inter-frequency and inter-RAT measurements for this
isSimCMAllowed DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Mobility Compressed Mode N.A. Boolean FAUX 34224 IF / IRAT Measurements evolution UA7.1
service. Simultaneous inter-frequency and inter-RAT measurements are not
possible for certain RAB combinat
If this parameter is set to TRUE than the RNC is allowed to use simultaneous
compressed mode for inter-frequency and inter-RAT measurements for this
isSimCMAllowed UlUserService 3 RNC <RadioAccessService>-<UlUserService> none expert_tuning Radio Mobility Compressed Mode N.A. Boolean FAUX 34224 IF / IRAT Measurements evolution UA7.1
service. Simultaneous inter-frequency and inter-RAT measurements are not
possible for certain RAB combinat
Indicates If the cell in question is a small cell (a metro, an enterprise or a home
isSmallCell RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio Retainability Interference N.A. Boolean false 124489 Interference and call drop reduction LR14.2
cell) or not.
Defines if the ISMLC functionality is allowed for that RNC. True means ISMLC is
isSmlcAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Location Services N.A. Boolean FAUX 34137 Integrated SMLC UA6.0
allowed.
This parameter enables/disables the support of Activation of Soft Congestion
isSoftCongestionAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Load Management Soft Congestion N.A. Boolean FAUX 119026 Soft Congestion UA8.1
feature within the RNC
Cell load exchange for I-RAT mobility from
isSonTransferOverloadFlag FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Unused Indicates if the overload flag is managed in the SON transfer N.A. Boolean false 155968 LR13.1
LTE
This parameter is to enable/disable RNC to use 3GPP specified "default
isSrb13dot6DefaultRbConfigEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Accessibility Call Establishment N.A. Boolean FAUX 27034 Update of RRM parameters during SRLR UA6.0
configuration identities" for SRB 132.6 kbps in RRC Connection Setup message
isSrb5Allowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management AMR Allow to enable/disable use of SRB 5 N.A. Boolean FAUX 18717 AMR Rate Adaptation UA5.0
Enable the possibility to map SRB on E-DCH in the UL for Cat 6 UE, while the call
isSrbOnEdchAllowedWhenTrbOnEdch RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSUPA Throughput N.A. Boolean FAUX 33581 SRB on HS-DSCH/E-DCH during Call UA6.0
is handling RAB(s) over E-DCH
isSrbOnEdchEligibilityReEvaluated RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio HSUPA This parameter allows to reconfig SRB from E-DCH to DCH N.A. Boolean false 122612 E-DCH performance enhancement LR14.2
SRB on E-DCH for all E-DCH categories
isSrbOnEdchForAllEdchCategory RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSUPA Throughput o FALSE: E-DCH cat 6 UE only N.A. Boolean FAUX 33581 SRB on HS-DSCH/E-DCH during Call UA6.0
o TRUE: All E-DCH categories
SRB on E-DCH for all E-DCH TTI
isSrbOnEdchForAllEdchTti RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio HSUPA Throughput o FALSE: 2 ms TTI only and 2 ms supported on NodeB N.A. Boolean FAUX 33581 SRB on HS-DSCH/E-DCH during Call UA6.0
o TRUE: 2 ms and 10 ms allowed
SRB on E-DCH for all NodeB minSF
isSrbOnEdchForAllMinSf RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio HSUPA Throughput o FALSE: 2 SF2 + 2 SF4 minSF only. N.A. Boolean FAUX 33581 SRB on HS-DSCH/E-DCH during Call UA6.0
o TRUE: All NodeB minSF
isSrbOverHspaEnabled FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabled NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabled RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSUPA Service activation flag for support of SRB on HSxPA N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabled RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabledForCs RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA with CS N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabledForPsConversational RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA with PS I/B conversational N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabledForPsIb RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA with PS I/B Rab N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabledForPsStreaming RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA with PS I/B streaming N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
isSrbOverHspaEnabledForSignaling RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio HSUPA Service activation flag for support of SRB on HSxPA with PS Signaling N.A. Boolean FAUX 29810 Fractional DPCH - SRB over HSPA UA8.1
This parameter indicates if SRLR DeltaCfn is computed based on RRC message
isSrlrDeltaCfnOptimized ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none customer_setting Radio Channels & Bearers Activation Time size, SrlrDelayMargin, dlSrbErrorMatching and DL SRB blerQuality or set to N.A. Boolean VRAI 27034 Update of RRM parameters during SRLR UA6.0
deltaCfn.
This parameter enables/disables the negotiation function for PS services over
isSRNCRenegotiationAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Call Admission Control CAC N.A. Boolean FAUX 34228 RRM developments UA6.0
DCH.
The parameter indicates if the incoming SRVCC VoIP HHO from LTE to UMTS is HSPA VoIP from LTE VoIP to WCDMA CS
isSrvccEutraToUtraHhoAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility LTE N.A. Boolean false 83659 LR13.1
allowed at BTS level. Continuity (VCC)
The parameter indicates if the incoming SRVCC VoIP HHO from LTE to UMTS is HSPA VoIP from LTE VoIP to WCDMA CS
isSrvccEutraToUtraHhoAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio Mobility LTE N.A. Boolean false 83659 LR13.1
allowed at RNC level. Continuity (VCC)
SSH/sFTP support in the iBTS and IP address
isSshSftpOnlyActivated BTSEquipment 0 BTS <BTSEquipment> critical customer_setting Transport Parameter to activate SshSftpOnly during comissioning N.A. Boolean false 111416 LR Future
source filtering on Node B & RNC
SSH/sFTP support in the iBTS and IP address
isSshSftpOnlyActivated IpRan 0 BTS <BTSEquipment>-<IpRan> none customer_setting Transport IP This parameter activates/deactivates the SSH/SFTP service N.A. Boolean FAUX 111416 LR Future
source filtering on Node B & RNC
This parameter indicates if the alarms service of the feature SshSftOnly is SSH/sFTP support in the iBTS and IP address
isSshSftpOnlyAlarmsActivated IpRan 3 BTS <BTSEquipment>-<IpRan> none customer_setting Transport IP N.A. Boolean FAUX 111416 LR Future
activated source filtering on Node B & RNC
SSH/sFTP support in the iBTS and IP address
isSshSftpOnlyLogsActivated IpRan 3 BTS <BTSEquipment>-<IpRan> none customer_setting Transport IP This parameter indicates if the logs service of the feature SshSftOnly is activated N.A. Boolean FAUX 111416 LR Future
source filtering on Node B & RNC
READ SSH/sFTP support in the iBTS and IP address
External Document
isSshSftpOnlySupported BTSEquipment BTS <BTSEquipment> none customer_setting Transport Page 31
This parameter indicates if SshSftOnly is activated on NodeB side N.A. Boolean false 111416 LR Future Alcatel-Lucent
ONLY source filtering on Node B & RNC
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
isStep2AmrRateControlDuringTheCallAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Speech Call Management AMR N.A. Boolean FAUX 32687 AMR mode change during the call - evolution UA6.0
isStreamingOnEdchAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio HSUPA Service This parameter enables or disables the use of E-DCH for streaming service. N.A. Boolean FAUX 30742 MBR handling in the HSUPA Scheduler UA7.1.2
This parameter allows or not to activate the feature Streaming over DCH
Enhancements.
TRUE: feature activated
isStreamingOverDchEnhancementsEnable RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call management Streaming N.A. Boolean FAUX 29400 Enhanced RRM for High Quality Streaming UA5.0
-iRM Table enable on Streaming RAB,
-iRM Scheduling enable on Streaming RAB,
-AO Step1 / Step2 disable for PS Streaming RAB and PS i/b signa
To allow OA&M controllable activation / deactivation of fine synchronized
isSynchronizedSimulcastAllowed MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS simulcast transmission mechanisms (this type of transmission allows the UE when N.A. Boolean FAUX 31868 MBMS Broadcast UA7.1
in soft handover area to possibly perform soft-combining operation)
This attribute enables or disables the System Information Change Indication sent
Management of system information change:
isSysInfoChangeNotifMobilesFach RNC 3 RNC <RNC> none system_restricted Radio Channels & Bearers SIB to mobiles in Cell_FACH mode when the System Information of a cell has N.A. Boolean FAUX 26228 UA4.1
notification to UE
changed.
This attribute enables or disables the paging type 1 sent to mobiles in IDLE mode Management of system information change:
isSysInfoChangeNotifMobilesIdle RNC 3 RNC <RNC> none system_restricted Radio Channels & Bearers SIB N.A. Boolean FAUX 26228 UA4.1
when the System Information of a cell has changed. notification to UE
Allows user to delay the updating of the system information until all updates are
complete (used to group several modifications in SIBs). If this flag is set to YES, Management of system information change:
isSysInfoUpdateDelayed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Channels & Bearers SIB N.A. Boolean FAUX 26228 UA4.1
then SIBs are updated (if needed) only when the flag is reset to NO.
notification to UE
NO: means system in
Switching between Video and Speech
isThisDlUserServiceEligibleToNiScudif DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Speech Call Management SCUDIF Indicates if the DlUserService is eligible or not to NI SCUDIF downgrade/upgrade N.A. Enumerate notEligible 75071 UA7.1.2
(SCUDIF) - Network initiation
This parameter indicates if the DL RB rate adaptation can target this RB for
either an upsize or downsize.
It allows the operator to restrict the list of RB rates on which RB adaptation RB adaptation based on traffic: DL and UL
isThisRbRateAdaptationDlRbSetTargetAllowed DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none customer_setting Radio PS Call management RB Rate Adaptation N.A. Boolean FAUX 27330 UA4.2
applies
with start @64kbit/s
It is only applicable for Interactive / Background PS RBs
This parameter indicates if the UL RB rate adaptation can target this RB for
either an upsize or downsize.
It allows the operator to restrict the list of RB rates on which RB adaptation RB adaptation based on traffic: DL and UL
isThisRbRateAdaptationUlRbSetTargetAllowed UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none customer_setting Radio PS Call management RB Rate Adaptation N.A. Boolean N.A. 27330 UA4.2
applies.
with start @64kbit/s
It is only applicable for Interactive / Background PS RB
This parameter is used to enable/disable MPDP feature 34170 code, and it
isThreeRabAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call management MPDP determines whether three I/B RABs or two I/B + one Streaming RABs are N.A. Boolean FAUX 34170 3 PDP contexts support in UTRAN UA6.0
allowed to be set up.
Robust Header Compression (ROHC - RFC
isTimerBasedCompressionEnabled RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none customer_setting Radio Protocols ROHC To activate timer-based compression. (Mode: U-O-R; Profile = 1) N.A. Boolean FAUX 22845 LR Future
3095/4815)
isTpcAlgo2ForEdchCat4 RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio HSUPA Power Control Force to use Algo 2 for Cat 4 UE call when it is in TTI 2ms cell on E-DCH N.A. Boolean FAUX 33336 HSUPA Category 4 to 6 Support UA6.0
isTpcAlgo2ForEdchCat6 RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio HSUPA Power Control Force to use Algo 2 for Cat 6 UE call when it is in TTI 2ms cell on E-DCH N.A. Boolean FAUX 33336 HSUPA Category 4 to 6 Support UA6.0
isTrafficShapingOnPortActivated IpRan 0 BTS <BTSEquipment>-<IpRan> critical customer_setting Transport IP When true, Traffic shaping on ethernet port or LAG is enabled Boolean false 79362 Flexible Operator Configurable Split IP Iub UA08.1
<RadioAccessService>-<AlwaysOnConf>- this parameter indicates if a time interval must be used to determine the value of Always On: User management with two-step
isTrafficTMI AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on T.B.D. Boolean FAUX 13473 UA2.0
<AoOnFachParam> the measTrafficQuant. downsizing
This indicates if the feature of iRM scheduling downgrade based on TXCP trigger
isTransCodePowerIrmSchedulingDowngradeAllowedFro
DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio PS Call management iRM Scheduling is allowed for this DL User Service.
N.A. Boolean FAUX 28144 iRM Scheduling downgrading based on TxCP UA4.2
mThisDlUserService
This applies when the primary cell is on SRNC or on DRNC.
This parameter indicates whether the Transport Bearer sharing for MBMS is
isTransportBearerSharingForMbmsAllowed NodeB 3 RNC <RNC>-<NodeB> none customer_setting Radio Broadcast Services MBMS N.A. Boolean FAUX 31868 MBMS Broadcast UA7.1
activated on the Iub interface.
The parameter indicates whether the RNC will allow ALCAP bearer modification
isTrspBearerModificationAllowedOnIurAsDrnc4Dch RadioAccessService 3 RNC <RadioAccessService> none customer_setting Transport ATM ALCAP Boolean FAUX 75057 Iu-CS Alcap modification in Q2630.2 LR Future
on IUR interface when acting as DRNC
The parameter indicates whether the RNC will allow ALCAP bearer modification
isTrspBearerModificationAllowedOnIurAsSrnc4Dch RadioAccessService 3 RNC <RadioAccessService> none customer_setting Transport ATM ALCAP Boolean FAUX 75057 Iu-CS Alcap modification in Q2630.2 LR Future
on IUR interface when acting as SRNC
The parameter indicates whether the RNC will allow ALCAP bearer modification
isTrspBearerModificationAllowedOnSrnc4Dch RadioAccessService 3 RNC <RadioAccessService> none customer_setting Transport ATM ALCAP Boolean FAUX 75057 Iu-CS Alcap modification in Q2630.2 LR Future
on Iu-Cs interface
This parameter allows Trsp Bearer Replacement procedure on SRNC for DCH.
HSPA transport bearer replacement on ATM &
isTrspBearerReplacementAllowedOnSrnc4Dch RadioAccessService 3 RNC <RadioAccessService> none customer_setting Transport ATM ALCAP (Feature 30091 UA06) N.A. Boolean FAUX 75093 LR Future
IP
This parameter allows Trsp Bearer Replacement procedure on SRNC for HSPA.
This flag allows AAL2 and IP Bearer Replacement to be performed specifically HSPA transport bearer replacement on ATM &
isTrspBearerReplacementAllowedOnSrnc4Hspa RadioAccessService 3 RNC <RadioAccessService> none customer_setting Transport ATM ALCAP N.A. Boolean FAUX 75093 LR Future
for HSPA (different from DCH) when the bit rate change (or QOS) (via SRLR) is IP
triggered as a result for
<RNC>-<NodeB>-<FDDCell>- It indicates whether normal cell below the threshold can be allowed or not when
isType1NormalCellAllowed Cdma1xMobilityInfo 3 RNC none customer_setting Radio Mobility [HHO][CDMA] N.A. Boolean FAUX 33853 Support of WCDMA to CDMA Handover UA6.0
<Cdma1xMobilityInfo> the WCDMA to CDMA HHO is decided by type1 scheme
indicates whether UDP Multiplexing is allowed in transmit side for the considered
isUdpMuxActivated UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none customer_setting Transport Unused port. N.A. Boolean FAUX 89716 UDP multiplexing on Iub (iBTS) Cancelled
indicates whether UDP Multiplexing is allowed in transmit side for the considered
isUdpMuxActivated UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none system_restricted Transport Unused port. N.A. Boolean false 89716 UDP multiplexing on Iub (iBTS) Cancelled
isUe6ADowngradeAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio PS Call management Determines whether a 6A measurement is to be used to trigger an UL downgrade N.A. Boolean VRAI 34227 State transitioning developments UA6.0
<RNC>-<LocationServices>- This attribute indicates whether the RNC shall support the UE Assisted AGPS
isUeAssistedAgpsAllowed SasCentricModeService 3 RNC none customer_init Transport IP Boolean false 120416 Iu-PC interface enhancement LR13.1
<SasCentricModeService> method of positioning when operating in SAS centric mode
isUeBasedAgpsAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Location Services It indicates if the UE based AGPS can be activated. N.A. Boolean FAUX 34151 Immediate Handover of Emergency calls UA3.2
isUeBasedAgpsAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Location Services It indicates if the UE based AGPS can be activated. N.A. Boolean FAUX 34151 Immediate Handover of Emergency calls UA3.2
<RNC>-<LocationServices>- This attribute indicates whether the RNC shall support the UE Based AGPS
isUeBasedAgpsAllowed SasCentricModeService 3 RNC none customer_init Transport IP Boolean false 120416 Iu-PC interface enhancement LR13.1
<SasCentricModeService> method of positioning when operating in SAS centric mode
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<AccessSession>-
isUeBasedAgpsEnabled 0 RNC partial customer_setting Radio Call Trace Indicates if “Network Assisted GPS” UE positioning method is allowed. N.A. Boolean FAUX 34582 UE positionning information to CTg and CTb UA8.1
ce <UePositionMeasConfigForCallTrace>
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<GeographicalSession>-
isUeBasedAgpsEnabled 0 RNC partial customer_setting Radio Call Trace Indicates if “Network Assisted GPS” UE positioning method is allowed. N.A. Boolean FAUX 34582 UE positionning information to CTg and CTb UA8.1
ce <UePositionMeasConfigForCallTrace>
Defines the procedure the RNC is allowed to use. If allowed, the nominal scenario
CallTracePeriodicLocationService <RNC>-<LocationServices>-
isUeBasedUeAuditAllowed 3 RNC none customer_init Radio Call Trace applies. Otherwise a degraded scenario applies with O&M controlled filtering of N.A. Boolean FAUX 34582 UE positionning information to CTg and CTb UA8.1
s <CallTracePeriodicLocationServices>
GPS assistance data (type & when applicable in number of satellites)
Defines the procedure the RNC is allowed to use.
<RNC>-<LocationServices>- If allowed, the audit scenario applies.
isUeBasedUeAuditAllowed CommercialLocationServices 3 RNC none customer_init Radio Location Services N.A. Boolean FAUX 27615 GPS assistance data developments UA7.1
<CommercialLocationServices> Otherwise a default scenario applies with O&M controlled filtering of GPS
assistance data (type & when applicable in number of satellites)
Defines the procedure the RNC is allowed to use.
<RNC>-<LocationServices>- If allowed, the audit scenario applies.
isUeBasedUeAuditAllowed EmergencyLocationService 3 RNC none customer_init Radio Location Services N.A. Boolean FAUX 27615 GPS assistance data developments UA7.1
<EmergencyLocationService> Otherwise a default scenario applies with O&M controlled filtering of GPS
assistance data (type & when applicable in number of satellites)
t indicates if the RNC takes into account the UE capabilities information sent by
isUeCapabilitiesInRabMatchingAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Channels & Bearers RAB Matching N.A. Boolean FAUX 24999 UE radio access capabilities for UA03 UA4.1
the mobile.
UE Radio Access capabilities in RAB to RB
isUeCapabilitiesInRabMatchingAllowedForPhyAndRlc RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Channels & Bearers RAB Matching Indicates if UE capacity filtering on PHY and RLC capabilities is allowed N.A. Boolean VRAI 25071 UA4.1
mapping
This parameter indicates if the check of UE capabilities with simultaneous HSxPA
isUeCapaWithHsxpaCheckAllowed RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio HSDPA Service N.A. Boolean FAUX 0 none UA6.0
is allowed
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<AccessSession>-
isUePositionAcquisitionRequired 0 RNC partial customer_setting Radio Call Trace Indicates if UE position (estimate) acquisition is required. N.A. Boolean FAUX 34582 UE positionning information to CTg and CTb UA8.1
ce <UePositionMeasConfigForCallTrace>
UePositionMeasConfigForCallTra <RNC>-<CallTrace>-<GeographicalSession>-
isUePositionAcquisitionRequired 0 RNC partial customer_setting Radio Call Trace Indicates if UE position (estimate) acquisition is required. N.A. Boolean FAUX 34582 UE positionning information to CTg and CTb UA8.1
ce <UePositionMeasConfigForCallTrace>
isUeR99RlcAmReconfigurationAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Protocols RLC reconfiguration N.A. Boolean FAUX 33598 RLC parameters reconfiguration UA6.0
Determines whether a UE internal measurement is to be used as an additional
isUeTxPowerOn4AAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio PS Call Management RB Rate Adaptation - Buffer N.A. Boolean FAUX 34227 State transitioning developments UA6.0
measurement on a 4A buffer occupancy traffic volume measurement report
Flag to control the transport overhead nature. With the flag set to false, the
transport overheads are fixed for all RAB types. When the flag is set to true, the EBR Overhead Optimization for IP and ATM
isVariableTransportOverheadAllowed RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Unused N.A. Boolean FAUX 97429 Cancelled
transport overheads for transport are calculated for each RAB based on the RAB transport
bit rate.
To allow OA&M controllable activation / deactivation of the feature 34378 at cell
isVoipOverHspaAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Speech Call Management VoIP N.A. Enumerate notAllowed 34378 Baseline for VoIP LR Future
level
To allow OA&M controllable activation / deactivation of the feature 34378 per
isVoipOverHspaAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none system_restricted Radio Speech Call Management VoIP N.A. Enumerate notAllowed 34378 Baseline for VoIP LR Future
neighbouring RNC
isVoipOverHspaAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management VoIP To allow OA&M controllable activation / deactivation of the feature 34378 N.A. Boolean FAUX 34378 Baseline for VoIP LR Future
To allow OA&M controllable activation / deactivation of the feature 34378 at cell
isVoipOverHspaAllowed RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none system_restricted Radio Speech Call Management VoIP N.A. Enumerate notAllowed 34378 Baseline for VoIP LR Future
level
This parameter defines whether the VSWR (Voltage Standing Wave Ratio) alarm
isVSWRThresholdConfigurable BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Alarms N.A. Boolean false 159393 Configurable VSWR Alarm Threshold LR13.1
threshold shall be configured or not
This parameter indicates this cell is whether VT call blocking cell or not at Mobility
isVtCallBlockAtMobilityOnCellAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility N.A. Boolean FAUX 118929 Support of VT call block over Iur UA08.1
cases(Intra/Inter Handover, SRNS Relocations)
This parameter indicates this cell is whether VT call blocking cell or not at Mobility
isVtCallBlockAtMobilityOnCellAllowed RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio Mobility N.A. Boolean FAUX 118929 Support of VT call block over Iur UA08.1
cases(Intra/Inter Handover, SRNS Relocations)
isVtCallBlockOnCellAllowed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Mobility Primary cell level activation flag for VT calls N.A. Boolean FAUX 98441 VT call block at Cell level LR Future
isVtCallBlockOnCellAllowed RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none system_restricted Radio Mobility Remote cell level activation flag for VT calls N.A. Boolean FAUX 98441 VT call block at Cell level LR Future
isVtCallBlockOnRncAllowed NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none system_restricted Radio Mobility Neighbouring Rnc level activation flag for VT calls N.A. Boolean FAUX 98441 VT call block at Cell level LR Future
isVtCallBlockOnRncAllowed RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Mobility Feature activation flag for VT call block N.A. Boolean FAUX 98441 VT call block at Cell level LR Future
Switching between Video and Speech
isVtServiceSupportedOn2G RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Speech Call Management SCUDIF Indicates if video telephony service is supported on 2G Core side N.A. Boolean FAUX 75071 UA7.1.2
(SCUDIF) - Network initiation
Indicates on an FDDCell level whether measurements for vulnerability checking
MultiServiceRabManagementProfi <RNC>-<CellProfiles>- should be set up. This parameter is usually set to false when all options Multi-Service RAB call drop reduction
isVulnerabilityMeasurementAllowed 3 RNC none customer_setting Radio Retainability Multi RAB N.A. Boolean false 123648 LR Future
le <MultiServiceRabManagementProfile> regarding actions on vulnerability detection are also set to false but this enhancement
correlation is not necessa
if enabled Wireless Priority Service (WPS) calls are directed to GSM if the UMTS
isWpsDirectedRetryAllowed Imcta 3 RNC <RadioAccessService>-<Imcta> none customer_setting Radio Mobility [HHO][iMCTA] N.A. Boolean FAUX 32601 iMCTA enhancement for WPS UA6.0
cell is in congestion
This attribute indicates the UDP port number used for proprietary attach
messages from Node B to RNC.
iubAttachUdpPortNumber RNC 3 RNC <RNC> none customer_setting Transport IP N.A. Integer 49152 65535 1 65534 27649 Native IP Iub support UA7.1
Attach messages are used to warn RNC that Node B is ready to accept an SCTP
INIT.
<RadioAccessService>-<UlRbSetConf>-
iubEdchDelayJitterBudget EdchParameters 3 RNC none system_restricted Radio HSUPA Iub BW Limitation Iub E-DCH delay budget for delay-sensive type of services ms Integer 0 50 10 34378 Baseline for VoIP LR Future
<EdchParameters>
Delay on Iub taken into account by the MAC-es re-ordering function (TSN
duplication detection,
<RadioAccessService>-<DedicatedConf>- flushing) (same value used for both E-DCH TTI 2 and 10 ms).
iubEdchDelayVariation NodeBConfClass 3 RNC none expert_tuning Radio HSUPA Scheduler TTIs Integer 0 255 5 33327 MAC-e Scheduler Evolutions UA6.0
<NodeBConfClass> This parameter corresponds to a number of TTI., which may also represent a
number of CFN.
In UA05, t
<RadioAccessService>-<DlRbSetConf>- it is the requested bitrate to capture percentage of time the connection is active,
iubFpEquivalentBitRate CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> the distribution of data rates used and the burstiness of the traffic.
<RadioAccessService>-<UlRbSetConf>- it is the requested bitrate to capture percentage of time the connection is active,
iubFpEquivalentBitRate CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> the distribution of data rates used and the burstiness of the traffic.
This parameter defines the equivalent bit-rate used for the MBMS PTM radio
iubFpEquivalentBitRate CacTransportInfoMbms 3 RNC none system_restricted Radio Broadcast Services MBMS bits/s Integer 0 16777216 33600 31868 MBMS Broadcast UA7.1
bearer (MTCH) on Iub interface.
<RadioAccessService>-<DlRbSetConf>-
iubFpMaxBitRate CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 Maximum bit rate on this interface bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
<RadioAccessService>-<UlRbSetConf>-
iubFpMaxBitRate CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 Maximum bit rate on this interface bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
This parameter defines the maximum bit-rate used for the MBMS PTM radio
iubFpMaxBitRate CacTransportInfoMbms 3 RNC none system_restricted Radio Broadcast Services MBMS bits/s Integer 0 16777216 67264 31868 MBMS Broadcast UA7.1
bearer (MTCH) on Iub interface.
This attribute represents the number of attempts a proprietary
ping message is sent from RNC to the remote end (NodeB) for the
iubHeartbeatNumAttempts RNC 3 RNC <RNC> none system_restricted Transport IP purpose of checking IP Iub User Plane conectivity. After
N.A. Integer 1 50 4 27649 Native IP Iub support UA7.1
heartBeatNbAttempts number of unsuccessfull ping messages, the
RNC
It is the time between 2 consecutive
heartbeat messages sent by RNC to NodeBs on IP Iub
transport interface.
iubHeartbeatPingTimeInterval RNC 3 RNC <RNC> none system_restricted Transport IP ms Integer 1000 10000 100 1800 27649 Native IP Iub support UA7.1
If RNC receives no reply in (iubHeartBeatNbAttempts *
iubHeartBeatPingTimeInterval) ms, it declares IP
Iub UP connectivity loss for that NodeB.
This attribute indicates the UDP port number used for proprietary heartbeat ping
iubHeartbeatUdpPortNumber RNC 3 RNC <RNC> none customer_init Transport IP messages from RNC to Node B. N.A. Integer 49152 65535 1 65535 27649 Native IP Iub support UA7.1
Ping messages are used to detect an IP link failure .
This identifier will be the link between RNL and TNL model.It needs to have the
iubIfId NodeB 0 RNC <RNC>-<NodeB> partial customer_setting Radio Design N.A. Integer 1 16383 N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
same value as the Iub instance in the CDL.
<RadioAccessService>-<DlRbSetConf>- This parameter indicates the transport QoS that shall be used for the radio
iubIurTransportQosId CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 N.A. Integer 0 3 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> bearer set configuration on Iub and Iur interface.
<RadioAccessService>-<UlRbSetConf>- This parameter indicates the transport QoS that shall be used for the radio
iubIurTransportQosId CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 N.A. Integer 0 3 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> bearer set configuration on Iub and Iur interface.
Time laps to wait before resetting iBTS in case of prolonged loss of IUB interface
if not in radiating mode. This timer is started when the iBTS is not connected to
iubLossTimeOut BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Synchronisation any of RNC, OMC-B and TIL (i.e. connected to none of them).
min Integer 20 1440 60 0 none UA2.1
Default value = 60 (1 hour)
<RadioAccessService>-<DlRbSetConf>-
iubQaal2EquivalentSssarSduLength CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 Service specific segmentation and reassembly SDU length bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
<RadioAccessService>-<UlRbSetConf>-
iubQaal2EquivalentSssarSduLength CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 Service specific segmentation and reassembly SDU length bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
Number of connection frame of 10 ms before activation to stop emitting on the HS-
DSCH FP.
<RadioAccessService>-<DedicatedConf>- HSPA transport bearer replacement on ATM &
iubSuspendTimeOffset NodeBConfClass 3 RNC none system_restricted Transport Iub Congestion Control
N.A. Integer 0 255 16 75093 LR Future
<NodeBConfClass> IP
0 means "stop emitting on the HS-DSCH FP" at Activation time,
255 means "stop emitting on the HS-DSCH FP" at mac-d reconfiguration time.
This parameter indicates the transport QoS that shall be used for the MBMS
PTM radio bearer (MTCH) configuration on Iub interface.
iubTransportQosId CacTransportInfoMbms 3 RNC none system_restricted Radio Broadcast Services MBMS N.A. Integer 0 3 1 31868 MBMS Broadcast UA7.1
Note that this QoS identifier shall correspond to one of the available QoS on
NodeB.
Internal interface Id for this Iu-cs instance.This Id must match the instance
iucsIfId CsCoreNetworkAccess 0 RNC <RNC>-<CsCoreNetworkAccess> partial customer_setting Radio Design N.A. Integer 1 24 N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
number of the CDL IucsIf component on Inode
<RadioAccessService>-<DlRbSetConf>- it is the requested bitrate to capture percentage of time the connection is active,
iuFpEquivalentBitRate CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> the distribution of data rates used and the burstiness of the traffic.
<RadioAccessService>-<UlRbSetConf>- it is the requested bitrate to capture percentage of time the connection is active,
iuFpEquivalentBitRate CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> the distribution of data rates used and the burstiness of the traffic.
<RadioAccessService>-<DlRbSetConf>-
iuFpMaxBitRate CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 Maximum bit rate on this interface bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
<RadioAccessService>-<UlRbSetConf>-
iuFpMaxBitRate CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 Maximum bit rate on this interface bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
The list of Iu network resource Ids. If no Iu Id is configured, all Iu Interfaces in CS
iuInterfaceIdList IuCsSession 0 RNC <RNC>-<ObjectTrace>-<IuCsSession> partial system_restricted Radio Call Trace N.A. Integer 0 16383 N.A. 30223 UA05 call trace enhancements UA5.0
domain are selected
The list of Iu network resource Ids. If no Iu Id is configured, all Iu Interfaces in PS
iuInterfaceIdList IuPsSession 0 RNC <RNC>-<ObjectTrace>-<IuPsSession> partial system_restricted Radio Call Trace N.A. Integer 0 16383 N.A. 30223 UA05 call trace enhancements UA5.0
domain are selected
iuPcId SasAccess 0 RNC <RNC>-<SasAccess> partial system_restricted Radio Design Iu* interface identifier N.A. Integer 1 1 1 0 none UA3.2
This attribute provides the RNC IuPriorityLevel associated to the corresponding
<RadioAccessService>-<TrafficClassBasedQos>- UMTS TrafficClassBasedQoS and ARPBasedQoS instances.
QoS differentiation based on TC, ARP and
iuPriorityLevel ArpBasedQos 3 RNC none customer_tuning Radio PS Call management QoS Differentiation N.A. Integer 1 15 N.A. 25080 UA5.0
<ArpBasedQos> This attribute is used to retrieve the QoS configuration parameters from the RAB THP
parameters included in the RANAP Rab
RNC Connection to multiple Core Network
iupsIfId PsCoreNetworkAccess 0 RNC <RNC>-<PsCoreNetworkAccess> partial system_restricted Radio Design N.A. Integer 1 24 N.A. 29417 UA5.0
nodes (Iu-Flex)
<RadioAccessService>-<DlRbSetConf>-
iuQaal2EquivalentSssarSduLength CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 Service specific segmentation and reassembly SDU length bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
<RadioAccessService>-<UlRbSetConf>-
iuQaal2EquivalentSssarSduLength CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 Service specific segmentation and reassembly SDU length bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
iurEdchDelayVariation NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none system_restricted Radio Mobility E-DCH over Iur Delay on Iur taken into account by the MAC-es reordering function TTI Integer 0 255 0 30744 HSUPA Over Iur UA6.0
<RadioAccessService>-<DlRbSetConf>- it is the requested bitrate to capture percentage of time the connection is active,
iurFpEquivalentBitRate CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> the distribution of data rates used and the burstiness of the traffic.
<RadioAccessService>-<UlRbSetConf>- it is the requested bitrate to capture percentage of time the connection is active,
iurFpEquivalentBitRate CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> the distribution of data rates used and the burstiness of the traffic.
<RadioAccessService>-<DlRbSetConf>-
iurFpMaxBitRate CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 Maximum bit rate on this interface bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
<RadioAccessService>-<UlRbSetConf>-
iurFpMaxBitRate CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 Maximum bit rate on this interface bits/s Integer 0 16777216 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
Internal interface Id for this Iur instance.This Id must match the instance number
iurIfId NeighbouringRNC 2 RNC <RNC>-<NeighbouringRNC> partial customer_setting Radio Design N.A. Integer 1 200 N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
of the CDL IurIf component on Inode.
iurMaxPunctureLimit UlUserService 3 RNC <RadioAccessService>-<UlUserService> none system_restricted Radio Channels & Bearers Configuration Maximum puncture limit for Iur N.A. Integer 0 15 N.A. 33320 New RAB and combinations for UA06 UA6.0
This parameter is used by the drift RNC to perform a control, according to what
<RadioAccessService>-<UlRbSetConf>- is supported, on the RNSAP request of RadioLink set up under some criteria,
iurMaxRateMatchingAttribute DynamicParameterPerDch 3 RNC none system_restricted Radio Channels & Bearers Configuration N.A. Integer 1 256 N.A. 20649 Online modification of UTRAN parameters UA3.0
<DynamicParameterPerDch> among which the one of rate matching. Thus, the rate matching demanded by the
source RNC will be co
iurMinPunctureLimit UlUserService 3 RNC <RadioAccessService>-<UlUserService> none system_restricted Radio Channels & Bearers Configuration Minimum puncture limit for Iur N.A. Integer 0 15 N.A. 33320 New RAB and combinations for UA06 UA6.0
This parameter is used by the drift RNC to perform a control, according to what
<RadioAccessService>-<UlRbSetConf>- is supported, on the RNSAP request of RadioLink set up under some criteria,
iurMinRateMatchingAttribute DynamicParameterPerDch 3 RNC none system_restricted Radio Channels & Bearers Configuration N.A. Integer 1 256 N.A. 20649 Online modification of UTRAN parameters UA3.0
<DynamicParameterPerDch> among which the one of rate matching. Thus, the rate matching demanded by the
source RNC will be co
This value is used to detect vulnerability status of a CS connection when the PRL
Multi-Service RAB call drop reduction for
iurMultiRabDlTxPowerNonVulnerableThreshold DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Retainability Multi RAB is on the DRNC. If this threshold is exceeded, steps are taken by the RNC to dBm Float -10.0 46.0 0.5 33 119418 UA08.1
Smartphone
evade multi PS/CS RAB combinations.
This is the time period allowed to check that a CS call has come out of the
vulnerable state. This timer helps prevent ping-pong situations. This timer Multi-Service RAB call drop reduction for
iurMultiRabDlTxPowerNonVulnerableTimeToTrigger DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Retainability Multi RAB s Mixed 0.5 60.0 0.1 5.0 119418 UA08.1
applies in the case when the PRL is on the DRNC. Smartphone
If this value is set to 0, this means that the DL Tx
This value is used to detect non vulnerable status of a CS connection when the
Multi-Service RAB call drop reduction for
iurMultiRabDlTxPowerVulnerableThreshold DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Retainability Multi RAB PRL is on the DRNC. If this threshold is exceeded, multi PS/CS RAB dBm Float -10.0 46.0 0.5 33.0 119418 UA08.1
Smartphone
combinations are allowed.
This is the time period allowed to check that a CS call has entered the vulnerable
state . This timer helps prevent ping-pong situations. This timer applies in the Multi-Service RAB call drop reduction for
iurMultiRabDlTxPowerVulnerableTimeToTrigger DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Retainability Multi RAB s Mixed 0.5 60.0 0.1 5.0 119418 UA08.1
case when the PRL is on the DRNC. Smartphone
If this value is set to 0, this means that the DL Tx P
<RadioAccessService>-<DlRbSetConf>-
iurQaal2EquivalentSssarSduLength CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 Service specific segmentation and reassembly SDU length bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
<RadioAccessService>-<UlRbSetConf>-
iurQaal2EquivalentSssarSduLength CacTransportInfoList 3 RNC none expert_tuning Radio Call Admission Control AAL2 Service specific segmentation and reassembly SDU length bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList>
<RadioAccessService>-<TrafficClassBasedQos>- This attribute provides the RNC IuTHP associated to a given QoS differentiation based on TC, ARP and
iuThp ThpBasedQos 3 RNC none customer_tuning Radio PS Call management QoS Differentiation N.A. Integer 1 14 N.A. 25080 UA5.0
<ArpBasedQos>-<ThpBasedQos> TrafficClassBasedQoS,/ARPBasedQoS/THPBasedQoS instances combination. THP
<RadioAccessService>-<DlRbSetConf>- This parameter indicates the transport QoS that shall be used for the radio
iuTransportQosId CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 N.A. Integer 0 3 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> bearer set configuration on Iu interface.
<RadioAccessService>-<UlRbSetConf>- This parameter indicates the transport QoS that shall be used for the radio
iuTransportQosId CacTransportInfoList 3 RNC none system_restricted Radio Call Admission Control AAL2 N.A. Integer 0 3 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfoList> bearer set configuration on Iu interface.
Target time for Iu-UP Initialization procedure to be completed before radio CFN
iuUpInitEndTimeBeforeCfn UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Speech Call Management AMR ms Integer 0 65535 N.A. 27803 Wideband AMR - UTRAN UA5.1
reach in case of CS Rab Modify
Mainly for cell RACH channel monitoring. Usually it required to specified one cell
kpiMonitoringCellIdList AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial customer_setting Radio Call Trace or two. If no cell is specified (i.e., the number of cells is set to 0), cell KPI tracing String <Null> 34395 UA07 Product Performance Targets UA7.0
is not required.
kpiMonitoringDuration AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial customer_setting Radio Call Trace Indicates duration of Uplane throughput monitoring, unit: in seconds s Integer 10 3600 1 60 34395 UA07 Product Performance Targets UA7.0
This parameter defines whether feature 78609 KPI Parity is activated or not.
kpiParityActivation BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Counters N.A. Boolean FAUX 97424 Parity for UA06 and UA07 ATT features UA7.1.3
78609 is part of the global feature 97424 Parity
This parameter defines whether feature 76934 KPI parity - HSDPA cell change
ATT KPI parity - HSDPA Cell Change
kpiParityHsdpaCellChangeRejectWorkaroundActivation BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Mobility [SHO] reject workaround is activated or not. 76934 is part of the global feature 97424 N.A. Boolean FAUX 76934 UA6.0
Workaround
Parity
<RadioAccessService>- This parameter is used for assessing the traffic evolution - Criteria in QoS UTRAN Self Optimisation (CPICH auto
kpiTrafficEvolThreshold PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] % Float 0.0 99.9 0.1 0.0 123989 LR Future
<PcpichPowerAutoAdjConfClass> degradation checking adjustment)
FDDCells whose plmnId = MocnParams.commonPlmnId and locationAreaCode is
lacRangeBegin LacSplit 3 RNC <RNC>-<MocnParams>-<LacSplit> none customer_setting Radio Design MOCN in the range {lacRangeBegin .. lacRangeEnd} share PLMN list as defined in N.A. Integer 0 65535 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
plmnIdList
FDDCells whose plmnId = MocnParams.commonPlmnId and locationAreaCode is
lacRangeEnd LacSplit 3 RNC <RNC>-<MocnParams>-<LacSplit> none customer_setting Radio Design MOCN in the range {lacRangeBegin .. lacRangeEnd} share PLMN list as defined in N.A. Integer 0 65535 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
plmnIdList
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last retransmission PU poll
L2 improvements support (RLC & MAC-hs/e
lastRetransPuPoll DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols N.A. Boolean VRAI 34388 UA7.0
<DlRlcAckFlexibleMode> TRUE indicates that poll is made at last PU in retransmission buffer S/W for improved RLC)
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last retransmission PU poll
lastRetransPuPoll DlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][DL] N.A. Boolean N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> TRUE indicates that poll is made at last PU in retransmission buffer
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last retransmission PU poll
lastRetransPuPoll UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation N.A. Boolean true 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> TRUE indicates that poll is made at last PU in retransmission buffer
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last retransmission PU poll
lastRetransPuPoll UlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][UL] N.A. Boolean N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode> TRUE indicates that poll is made at last PU in retransmission buffer
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last transmission PU poll
L2 improvements support (RLC & MAC-hs/e
lastTransPuPoll DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols N.A. Boolean VRAI 34388 UA7.0
<DlRlcAckFlexibleMode> TRUE indicates that poll is made at last PU in transmission buffer S/W for improved RLC)
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last transmission PU poll
lastTransPuPoll DlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][DL] N.A. Boolean VRAI 16717 RRC States Management UA3.0
<DlRlcAckMode> TRUE indicates that poll is made at last PU in transmission buffer
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last transmission PU poll
lastTransPuPoll UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation N.A. Boolean true 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> TRUE indicates that poll is made at last PU in transmission buffer
<RadioAccessService>-<RlcConfClass>- TS 25.331 Last transmission PU poll
lastTransPuPoll UlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][UL] N.A. Boolean VRAI 16717 RRC States Management UA3.0
<UlRlcAckMode> TRUE indicates that poll is made at last PU in transmission buffer
TS 23.032
Position of a site on a map of the world measured as the distance to the North or
latitude App 3 RNC <RNC>-<NodeB>-<FDDCell>-<App> none customer_setting Radio Design South of the equator.
N.A. Integer 0 8388607 N.A. 13453 UE Positioning Based on Cell Coverage UA2.0
The expected coded value is calculated from a formula allowing the conversion
between the latitude given in degree X and the corresponding
TS 23.032
Position of a site on a map of the world measured as the distance to the North or
latitude GaiCoord 3 RNC <RNC>-<NodeB>-<FDDCell>-<GaiCoord> none customer_setting Radio Design South of the equator.
N.A. Integer 0 8388607 N.A. 13453 UE Positioning Based on Cell Coverage UA2.0
The expected coded value is calculated from a formula allowing the conversion
between the latitude given in degree X and the corresponding
Position of a site on a map of the world in relation to the North or South of the
latitudeSign App 3 RNC <RNC>-<NodeB>-<FDDCell>-<App> none customer_setting Radio Design N.A. Enumerate N.A. 13453 UE Positioning Based on Cell Coverage UA2.0
equator.
Position of a site on a map of the world in relation to the North or South of the
latitudeSign GaiCoord 3 RNC <RNC>-<NodeB>-<FDDCell>-<GaiCoord> none customer_setting Radio Design N.A. Enumerate N.A. 13453 UE Positioning Based on Cell Coverage UA2.0
equator.
Traffic segmentation on RRC establishment can be used to separate R99 and
HSPA traffic onto different layers (parameter rrcRedirectionType). For specific Traffic Segmentation between HSPA Layers
layerPreferredForR99 FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility RRC Redirection N.A. Boolean FAUX 84900 UA6.0
network configurations it can be useful to allow several layers to carry HSPA by RRC Redirection
traffic but still to pr
other name: addDelta
It represents a threshold relative to the strongest measured cell in the active set
<RadioAccessService>-<DedicatedConf>-
legAdditionDelta SoftHoConf 3 RNC none customer_tuning Radio Mobility [SHO][Periodical] (taking into account the selected measurement quantity), for addition of cell in the dB Float 0 24 0,5 4 Q00852425 SHO Periodic Mode UA1
<HoConfClass>-<UsHoConf>-<SoftHoConf>
active set.
A too large a threshold will degrade the macro-dive
other name: dropDelta
It represents a threshold relative to the strongest measured cell in the active
<RadioAccessService>-<DedicatedConf>-
legDroppingDelta SoftHoConf 3 RNC none customer_tuning Radio Mobility [SHO][Periodical] (taking into account the selected measurement quantity), for cell removal from the dB Float 0 24 0,5 8 Q00852425 SHO Periodic Mode UA1
<HoConfClass>-<UsHoConf>-<SoftHoConf>
active set.
If the Drop Delta is set too low, a cell may remain in t
Length of cell broadcasting service schedule message measured in CTCH block
lengthCbsScheduleMessage CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial system_restricted Radio Broadcast Services CBS N.A. Integer 8 40 8 40 75068 CBS improvement on dynamic scheduling LR Future
sets (CTCH-BS)
This configurable parameter allows the operator to provision the Level1 to Level2
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
level1ToLevel2DlPowerThreshold PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] Downlink Power Threshold used for Downlink Power Level determination by the % Integer 0 100 1 30 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
100508/123989 UTRAN Self Optimisation (cell overload).
This configurable parameter allows the operator to provision the Level2 to Level1
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
level2ToLevel1DlPowerThreshold PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] Downlink Power Threshold used for Downlink Power Level determination by the % Integer 0 100 1 25 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
100508/123989 UTRAN Self Optimisation (cell overload).
This configurable parameter allows the operator to provision the Level2 to Level3
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
level2ToLevel3DlPowerThreshold PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] Downlink Power Threshold used for Downlink Power Level determination by the % Integer 0 100 1 70 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
100508/123989 UTRAN Self Optimisation (cell overload).
This configurable parameter allows the operator to provision the Level3 to Level2
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
level3ToLevel2DLPowerThreshold PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] Downlink Power Threshold used for Downlink Power Level determination by the % Integer 0 100 1 65 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
100508/123989 UTRAN Self Optimisation (cell overload).
<RadioAccessService>-<OverloadInfo>-
levelLimit Overload 3 RNC none system_restricted Radio Load Management Overload Control N.A. Integer 0 5 2 33804 Manual Overload Control UA5.0
<RNCNodeOverloadControl>-<Overload>
This parameter specifies the LFO Id of this LFO as used by DHCP. LFO id is
between 0 to 31.
BBU Clustering: lightRADIO Fronthaul
lfoIdForDhcp LFO 0 BTS <BTSEquipment>-<LFOSubCluster>-<LFO> partial customer_setting BTS CEM Management For an LFO Master (role == master) indicates the LFO Id of this LFO in a DHCP N.A. Integer 0 31 1 0 159946 LR Future
Optimizer Support in WCDMA (x/eCCM-u)
DISCOVER Request from BBU to the LFO Master(s), so that DHCP Server(s) on
LFO Master(
This parameter specifies the user friendly LFO name, as chosen by planners
(primary key). Unique within UTRAN and eUTRAN (for a given real world LFO, BBU Clustering: lightRADIO Fronthaul
lfoName LFO 0 BTS <BTSEquipment>-<LFOSubCluster>-<LFO> partial customer_setting BTS CEM Management N.A. String 1 64 N.A. 159946 LR Future
which may be represented by more than 1 instance of LFO with the same name if Optimizer Support in WCDMA (x/eCCM-u)
multiple BBUs share the sam
This parameter specifies the user friendly LFOSubCluster name, as chosen by
planners (primary key). Unique within UTRAN and eUTRAN (for a given real world BBU Clustering: lightRADIO Fronthaul
lfoSubClusterName LFOSubCluster 0 BTS <BTSEquipment>-<LFOSubCluster> partial customer_setting BTS CEM Management N.A. String 1 64 N.A. 159946 LR Future
LFO Sub Cluster, which may be represented by more than 1 instance of Optimizer Support in WCDMA (x/eCCM-u)
LFOSubCluster with the same nam
Gigabit Ethernet MDA SW introduction
linkSpeed LAGroup 0 BTS <BTSEquipment>-<LAGroup> critical system_restricted Transport Ethernet This parameter gives the speed to be used by the links of the LAG Enumerate 1Gbps 34453 UA7.1
(WCDMA)
This parameter defines the RLC-UM Length Indicator (LI) for MTCH. Cf. 3GPP
liSize MbmsRlcUMode 3 RNC none system_restricted Radio Broadcast Services MBMS TS 25.322 N.A. Enumerate 7 31868 MBMS Broadcast UA7.1
Size in number of bits
This parameter identifies the cell color at which the Signaling traffic starts to be
<RadioAccessService>-<DedicatedConf>- carried over Cell_FACH as oppose to Cell_DCH. For example if it is set to Red, Signalling Traffic Management on CELL_FACH
loadColorUsedForSignalingOverCellFach CacOnFachParam 3 RNC none expert_tuning Radio Power Management FACH N.A. Enumerate Red 127518 LR Future
<CacConfClass>-<CacOnFachParam> then the SRB for any Signaling traffic will be set up on CELL_FACH if the cell Enhancement.
color is Red
iMCTA needs cell load information for handover target decision. For peer RNC
cells the load information is not available. This parameter specifies the load iMCTA Enhanced with HSPA Load – Blind
loadHandlingPrnc Imcta 3 RNC <RadioAccessService>-<Imcta> none customer_setting Radio Mobility [HHO][iMCTA] N.A. Enumerate alwaysBlack 89858 UA8.1
condition the serving RNC shall assume for peer RNC FDD cells. A fix load color HHO – Direct HHO on AO Upsize
is assumed for all
A localCellGroup is a group of local cells of a iBTS associated with the same
localCellGroupId BTSCell 0 BTS <BTSEquipment>-<BTSCell> critical system_restricted Radio Design N.A. ServiceLink N.A. 13467 Support of two continous carriers UA2.0
carrier.
TS 25.401(release 1999)
The Local cell Identifier is used to uniquely identify the set of resources within a
localCellId BTSCell 0 BTS <BTSEquipment>-<BTSCell> critical system_restricted Radio Design N.A. Integer 0 268435455 N.A. 0 none UA1
node B required to support a cell (as identified by a C-Id). It supports uniqueness
within the UTRAN for management system purposes.
The Local
localCellId FDDCell 0 RNC <RNC>-<NodeB>-<FDDCell> partial customer_setting Radio Design localCellId of the associated BTSCell N.A. Integer 0 268435455 N.A. 0 none UA1
<BTSEquipment>-<IpRan>-
localMEPId MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Identifier of the local MEP N.A. Integer 1 8191 N.A. 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
<RadioAccessService>-<AutomatedCellBarring>- This parameter defines whether local TMU overload can cause barring on the
localTmuOverloadAllowed OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring N.A. Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion> cells that are active on the TMU.
TS23.003
The LAI is composed of the following elements:
MCC+MNC+LAC
locationAreaCode CorrespondingRnc 3 RNC <RNC>-<LteNeighbour>-<CorrespondingRnc> none customer_setting Radio Mobility LTE N.A. Mixed 1 65533 N.A. 100894 UMTS to LTE Handover LR14.2
-Mobile Country Code (MCC) identifies the country in which the PLMN is located.
The value of the MCC is the same as the three digit MCC contained in
international mobile subscriber iden
TS23.003 subclause4.1
The LAI is composed of the following elements:
locationAreaCode FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Design MCC+MNC+LAC
N.A. Mixed 1 65533 N.A. 0 none UA1
-Mobile Country Code (MCC) identifies the country in which the PLMN is located.
The value of the MCC is the same as the three digit MCC contained in
international mobile
TS23.003
The LAI is composed of the following elements:
locationAreaCode GSMCell 3 RNC <RNC>-<GSMNeighbour>-<GSMCell> none customer_setting Radio Design MCC+MNC+LAC
N.A. Mixed 1 65533 N.A. 0 none UA1
-Mobile Country Code (MCC) identifies the country in which the PLMN is located.
The value of the MCC is the same as the three digit MCC contained in
international mobile subscriber i
TS23.003 subclause4.1
The LAI is composed of the following elements:
locationAreaCode RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio Design MCC+MNC+LAC
N.A. Mixed 1 65533 N.A. 21091 IMSI Based Handover UA3.0
-Mobile Country Code (MCC) identifies the country in which the PLMN is located.
The value of the MCC is the same as the three digit MCC contained in
international mobile
This parameter represents the percentage of received power due to other
UL Load estimation for E-DCH with multiple
locFrequencyReuseFactor BTSCell 3 BTS <BTSEquipment>-<BTSCell> none expert_tuning Radio HSUPA UL Radio Load external cells. This parameter is used when parameter % Integer 0 100 10 33612 UA7.1.2
CEMs
edchLoadEstimationAlgorithm has been set to SIR_BASED.
ITS 24.008
It corresponds to the timer T3212 in TS 24.008.
decihou
locUpdatePeriod RadioAccessService 3 RNC <RadioAccessService> none customer_tuning Radio Design Integer 0 255 20 0 none UA2.1
This parameter indicates the time between two location update requests,
rs
0 means that no periodic location update is requested.
TS 23.032
Position of a site on a map of the world measured as the distance to the East or
longitude App 3 RNC <RNC>-<NodeB>-<FDDCell>-<App> none customer_setting Radio Design West of a set line.
N.A. Integer -8388608 8388607 N.A. 13453 UE Positioning Based on Cell Coverage UA2.0
The expected coded value is calculated from a formula allowing the conversion
between the longitude given in degree X (between -180° and 180°)
TS 23.032
Position of a site on a map of the world measured as the distance to the East or
longitude GaiCoord 3 RNC <RNC>-<NodeB>-<FDDCell>-<GaiCoord> none customer_setting Radio Design West of a set line.
N.A. Integer -8388608 8388607 N.A. 13453 UE Positioning Based on Cell Coverage UA2.0
The expected coded value is calculated from a formula allowing the conversion
between the longitude given in degree X (between -180° and 180°)
This parameter defines the number of time the Access Information message will
loopForAccessInformationMessage MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS be repeated on MCCH. N.A. Integer 1 10 N.A. 31868 MBMS Broadcast UA7.1
This parameter is not used in this release.
This parameter determines the mapping of basic call types to low priority group
call type
lowPriorityGroupCall BasicCallType 3 RNC <RadioAccessService>-<BasicCallType> none expert_tuning Radio Call Admission Control CAC N.A. Boolean N.A. 127550 Traffic Filtering in Cell Overload LR13.1
If the boolean is true, the corresponding basic call type (userLabel) is a part of
low priority group call type
If uplink traffic is below this threshold for a pre-configured time (see
<RadioAccessService>-<DedicatedConf>-
minBurstWindowForTtiSelection), then a TTI reconfiguration to 10ms TTI will be
lowUplinkTrafficThresholdFor10msTti EdchTrafficActivitySmartphone 3 RNC <HspaTrafficActivityDetectionConf>- none expert_tuning Radio HSUPA Congestion Control Kbits/s Integer 0 5440 1 384 120363 Smart phone EDCH resource usage. LR13.1
considered if already at 2ms TTI.
<EdchTrafficActivitySmartphone>
Meaningful only if uplinkThresholdSmartEdchResourceusageActivation i
Source IP V4 address used for CT UDP traffic from LRCE to TCE.
This parameter is significant only for LRCE and may be present for LRCE / is not
lrceIpV4Address CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial customer_init Radio Call Trace N.A. IP4Address N.A. 162427 LRCE 3G Call Trace (End-to-End) LR Future
significant for RNC 9370 and may be absent for RNC 9370.
For LRCE this parameter is significant only if param
Source IP V6 address used for CT UDP traffic from LRCE to TCE.
This parameter is significant only for LRCE and may be present for LRCE / is not
lrceIpV6Address CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial customer_init Radio Call Trace N.A. IP6Address N.A. 162427 LRCE 3G Call Trace (End-to-End) LR Future
significant for RNC 9370 and may be absent for RNC 9370.
For LRCE this parameter is significant only if param
READ <RNC>-<NodeB>-<FDDCell>-
lteCellLink LteNeighbouringCell RNC none customer_setting Radio Mobility LTE Pointer to a valid instance of LteCell MO N.A. ServiceLink N.A. 100894 UMTS to LTE Handover LR14.2
ONLY <LteNeighbouringCell>
lteFrequencyAndBandwidthId LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none customer_setting Radio Mobility LTE Pointer to a valid instance of LteFrequencyAndBandwidth MO N.A. ServiceLink N.A. 100894 UMTS to LTE Handover LR14.2
lteNeighbourConfClassId LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none customer_setting Radio Mobility LTE Pointer to a valid instance of LteNeighbourConfClass MO N.A. ServiceLink N.A. 100894 UMTS to LTE Handover LR14.2
<RadioAccessService>-<DedicatedConf>-
lteReportingQuantity RRCMeasurement 3 RNC none expert_tuning Radio Mobility LTE indicates the quantity that the UE reports : RSRP or RSRQ or both N.A. Enumerate Rsrp 100894 UMTS to LTE Handover LR14.2
<MeasurementConfClass>-<RRCMeasurement>
Indicates the reporting quantity to favor for HHO trigger when the UE reports :
<RadioAccessService>-<Imcta>- RSRP and RSRQ quantities
lteReportingQuantityToFavour LteNeighbourConfClass 3 RNC none expert_tuning Radio Mobility LTE N.A. Enumerate Rsrp 100894 UMTS to LTE Handover LR14.2
<LteNeighbourConfClass> This parameter is no more significant (replaced by spare parameter
FDDCell.reserved0 bit2, used when LteReportingQuantity is set to both)
Specific MAC address to be used for the virtual link.
Gigabit Ethernet MDA SW introduction
macAddress LAGroup 0 BTS <BTSEquipment>-<LAGroup> critical customer_setting Transport Ethernet If the parameter is not present: the MAC address of the virtual link is the smallest N.A. DashedHexString 6 6 N.A. 34453 UA7.1
(WCDMA)
MAC address of the two ports of the MDA Giga-Eth
Specific MAC address to be used for the MEP. If the MAC address is not
macAddress VirtualInterface 0 BTS <BTSEquipment>-<IpRan>-<VirtualInterface> none expert_tuning Transport IP present, a MAC address will be taken among the PQ3 Mac address or a free N.A. DashedHexString 6 6 N.A. 79362 Flexible Operator Configurable Split IP Iub UA8.1
Mac address in the mim
This parameter represents the maximum number of credits that a Mac-C can
<RadioAccessService>-<SccpchClass>- allocate to a Mac-D for a given CmCH-PI (Common Transport Channel Priority
macDCredit DxChConf 0 RNC critical system_restricted Radio Channels & Bearers System N.A. Integer 0 255 N.A. 16717 RRC States Management UA3.0
<DxChConf> Indicator as defined in TS 25.423)
unit given in Mac-D SDU.
subfra
[Continuous Packet
macDtxCycleEdchTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management MAC DTX Cycle Length (when E-DCH TTI 10ms) me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
[Continuous Packet
macDtxCycleEdchTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management MAC DTX Cycle Length (when E-DCH TTI 2ms) me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
maximum RLC PDU size allowed with RLC flexible size, which has mainly two
L2 improvements support (RLC & MAC-hs/e
macEhsMaximumPduSizePsIb HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio HSDPA Flexible MAC-ehs/RLC purposes : limit PDU size on the transport + baseline for Iub/Iur flow control which bytes Integer 42 1504 1 378 34388 UA7.0
S/W for improved RLC)
drives the granularity of the credits – this is used for PS I/B radio-bearers.
maximum RLC PDU size allowed with RLC flexible size, which has mainly two
L2 improvements support (RLC & MAC-hs/e
macEhsMaximumPduSizePsStr HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio HSDPA Flexible MAC-ehs/RLC purposes : limit PDU size on the transport + baseline for Iub/Iur flow control which bytes Integer 42 1504 1 378 34388 UA7.0
S/W for improved RLC)
drives the granularity of the credits – this is used for PS Streaming radio-bearers.
Reference RLC PDU size used to control the internal credit allocation from Mac-C
macEhsReferencePduSizeCellFach HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio Power Management FACH to Mac-D for PS I/B radio-bearers in CELL_FACH state. Externally, the bytes Integer 42 1504 1 378 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
macEhsMaximumPduSizePsIb parameter is used. 168710
Reference RLC PDU size used to control the internal credit allocation from Mac-C
macEhsReferencePduSizeCellPch HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio PS Call management Always-on to Mac-D for PS I/B radio-bearers in CELL_PCH state. Externally, the bytes Integer 42 1504 1 378 120428 Enhanced PCH support for Qchat LR14.2
macEhsMaximumPduSizePsIb parameter is used.
<RadioAccessService>-<DedicatedConf>-
macHsWindowSize CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none system_restricted Radio HSDPA FACH MAC-hs window size N.A. Enumerate 32 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<CommonPriorityQueue> 168710
<RadioAccessService>-<DlRbSetConf>-
macHsWindowSize HsdpaParameters 3 RNC none expert_tuning Radio HSDPA Scheduler This parameter provides the duration of the CQI feedback cycle. N.A. Enumerate 32 36247 Cs Voice over HSPA LR15.1
<HsdpaParameters>
macHsWindowSize HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none expert_tuning Radio HSDPA Scheduler This parameter provides the duration of the CQI feedback cycle. N.A. Enumerate 32 27932 HSDPA Step1 UA4.2
<RadioAccessService>-<DedicatedConf>-
macHsWindowSize PagingPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaPagingSysInfo>- none customer_tuning Radio Accessibility Paging MAC-ehs window size N.A. Enumerate 32 120428 Enhanced PCH support for Qchat LR Future
<PagingPriorityQueue>
maciisMaximumPduSizePsIb EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Synchronisation Radio synchronisation The maximum RLC PDU size allowed. It is used for PS I/B radio-bearers. bytes Integer 2 1505 1 1505 89563 Enhanced L2 for Uplink LR13.3
maciisMaximumPduSizePsStr EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Synchronisation Radio synchronisation The maximum RLC PDU size allowed. It is used for PS Streaming RBs. bytes Integer 2 1505 1 1505 89563 Enhanced L2 for Uplink LR13.3
maciisMinimumPduSizePsIb EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Synchronisation Radio synchronisation The minimum RLC PDU size allowed. It is used for PS I/B radio-bearers. bytes Integer 2 1505 1 2 89563 Enhanced L2 for Uplink LR13.3
maciisMinimumPduSizePsStr EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Synchronisation Radio synchronisation The minimum RLC PDU size allowed. It is used for PS Streaming RBs. bytes Integer 2 1505 1 2 89563 Enhanced L2 for Uplink LR13.3
[Continuous Packet E-DCH
macInactivityThreshold CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management Inactivity threshold on E-DCH transmission to transition to MAC DTX state Enumerate Infinity 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] TTI
This parameter uniquely identifies the eNodeB within the network.
macroEnbId LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none customer_setting Radio Mobility LTE It corresponds to the 20 leftmost bits of E-UTRAN Cell Identifier in TS 36.423 N.A. Integer 0 1048575 N.A. 100894 UMTS to LTE Handover LR14.2
9.2.14 ECGI.
mainRadiusServerIpV4Address RadiusParameters 3 BTS <BTSEquipment>-<RadiusParameters> none customer_init Transport IP The IP V4 address of the main radius server N.A. IP4Address N.A. 33278 Node B Security UA06 Development UA8.1
mainRadiusServerIpV6Address RadiusParameters 3 BTS <BTSEquipment>-<RadiusParameters> none customer_init Transport IP The IP V6 address of the main radius server N.A. IP6Address N.A. 33278 Node B Security UA06 Development UA8.1
mainRadiusServerSharedSecretKey RadiusParameters 3 BTS <BTSEquipment>-<RadiusParameters> none customer_init Transport IP N.A. HexString 1 288 N.A. 33278 Node B Security UA06 Development UA6.0
<RNC>-<CsCoreNetworkAccess>- It is the step sent in the “Number of Step” IE of the RANAP OVERLOAD
majorIncrStep CSSendingRanapOverloadControl 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP CONTROL message from RNC to CN when the RNC overload level stays in N.A. Integer 0 16 1 33804 Manual Overload Control UA5.0
<CSSendingRanapOverloadControl> Major for another ignoreTimer.
<RNC>-<PsCoreNetworkAccess>- It is the step sent in the “Number of Step” IE of the RANAP OVERLOAD
majorIncrStep PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP CONTROL message from RNC to CN when the RNC overload level stays in N.A. Integer 0 16 1 33804 Manual Overload Control UA5.0
<PSSendingRanapOverloadControl> Major for another ignoreTimer.
<RNC>-<CsCoreNetworkAccess>- It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
majorToCriticalStep CSSendingRanapOverloadControl 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP message from RNC to CN when the RNC overload level goes from Major to N.A. Integer 0 16 6 33804 Manual Overload Control UA5.0
<CSSendingRanapOverloadControl> Critical.
<RNC>-<PsCoreNetworkAccess>- It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
majorToCriticalStep PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP message from RNC to CN when the RNC overload level goes from Major to N.A. Integer 0 16 6 33804 Manual Overload Control UA5.0
<PSSendingRanapOverloadControl> Critical.
managerAddress DeviceTable 3 BTS <BTSEquipment>-<SiteLan>-<DeviceTable> none customer_setting Radio Design IP address of Manager, meaningful only if “ManagerSpec = address”. N.A. IP4Address N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0
Fully Qualified Domain Name of the manager, for instance: mngr1.<domain>,
managerFqdn DeviceTable 3 BTS <BTSEquipment>-<SiteLan>-<DeviceTable> none customer_setting Radio Design N.A. String 0 N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0
meaningful if “ManagerSpec = FQDN”
managerSpec DeviceTable 3 BTS <BTSEquipment>-<SiteLan>-<DeviceTable> none customer_setting Radio Design N.A. Enumerate N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0
<BTSEquipment>-<IpRan>-
maName MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Maintenance Association Name N.A. HexString 2 90 N.A. 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
<BTSEquipment>-<IpRan>-
maNameType MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Format of Maintenance Association Name N.A. Enumerate CHAR_STRING 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
This attribute defines the Rx attenuation value for RX Amplifier managing the
manRxAttenuationDiv AntennaAccess 0 BTS <BTSEquipment>-<AntennaAccess> none customer_setting BTS Antenna Diversity antenna. dB Float 0 12 0,5 4 96374 Parameter and Alarm Mapping Gaps UA7.1.2
This parameter is managed only for MSNB
This attribute defines the Rx attenuation value for RX Amplifier managing the Main
manRxAttenuationMain AntennaAccess 0 BTS <BTSEquipment>-<AntennaAccess> none customer_setting BTS Antenna antenna. dB Float 0 12 0,5 4 96374 Parameter and Alarm Mapping Gaps UA7.1.2
This parameter is managed only for MSNB
<RadioAccessService>-<AutomatedCellBarring>- This parameter activates manual cell barring. It overrides automated cell barring
manualCellBarringActivated ManualActivation 3 RNC none customer_setting Radio Load Management Cell Barring s Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
<ManualActivation> thresholds.
<RadioAccessService>-<AutomatedCellBarring>- This parameter activates manual class barring. It overrides automated cell barring
manualClassBarringActivated ManualActivation 3 RNC none customer_setting Radio Load Management Cell Barring s Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
<ManualActivation> thresholds.
This parameter defines the filtering rate for call attempt of CS domain. This
<RNC>-<CsCoreNetworkAccess>- parameter type is integer and range is from 0 to 100. And, “0” means that all
manualIdtFilterRate CSRanapOverloadControl 3 RNC none expert_tuning Radio Unused % Integer 0 100 10 0 75070 RNC overload control improvement Cancelled
<CSRanapOverloadControl> Initial Direct Transfer (IDT) messages are accepted, i.e this feature is
deactivated.
This parameter defines the filtering rate for call attempt of PS domain. This
<RNC>-<PsCoreNetworkAccess>- parameter type is integer and range is from 0 to 100. And, “0” means that all
manualIdtFilterRate PSRanapOverloadControl 3 RNC none expert_tuning Radio Unused % Integer 0 100 10 0 75070 RNC overload control improvement Cancelled
<PSRanapOverloadControl> Initial Direct Transfer (IDT) messages are accepted, i.e this feature is
deactivated.
Number of RLS in Nodeb that cross up through this threshold, starting the
manualOverloadThresholdEventA NodeB 3 RNC <RNC>-<NodeB> none system_restricted Radio Load Management Manual Overload Control N.A. Integer 0 65535 65535 33804 Manual Overload Control UA5.0
overload filtering and raising an alarm for this Nodeb
Number of RLS in Nodeb that cross down through this threshold, stopping the
manualOverloadThresholdEventB NodeB 3 RNC <RNC>-<NodeB> none system_restricted Radio Load Management Manual Overload Control N.A. Integer 0 65535 65535 33804 Manual Overload Control UA5.0
overload filtering and clearing the alarm for this Nodeb
OAM support to Multi carrier Enhancement for
mateNodeB NodeB N.A. RNC <RNC>-<NodeB> none customer_setting Radio Configuration This parameter defines the mate NodeB for extended carriers support. N.A. ServiceLink N.A. 104357 LR Future
B4FA
External Document Page 35 Alcatel-Lucent
<RadioAccessService>-<DedicatedConf>- Service Based Mobility parameters
maxActiveSetSize Event1AHoConfInSib11 3 RNC none customer_tuning Radio Mobility [SHO] Maximum Active Set size in SIB11 N.A. Integer 1 6 4 33546 UA6.0
<HoConfClass>-<Event1AHoConfInSib11> enhancement
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
<RadioAccessService>-<RlcConfClass>- TS 25.331
maxDat DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> Maximum DAT - Number of retransmissions of a PU before a SDU is discarded
<RadioAccessService>-<RlcConfClass>- TS 25.331
maxDat UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation N.A. Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> Maximum DAT - Number of retransmissions of a PU before a SDU is discarded
<RadioAccessService>-<RlcConfClass>- TS 25.331
maxDat UlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][UL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode> Maximum DAT - Number of retransmissions of a PU before a SDU is discarded
Delay to take into account a CS call establishment in the counter
LTE to UMTS PS HO and cell reselection
maxDelayForCsCallEstablishment RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility LTE VS.CS_Call_after_CS_fallback after a relocation from 4G is received with cause s Integer 1 300 15 108661 UA8.1
Enhancement
set to “CS fallback triggered”
Maximum downlink rate for AMR Narrowband calls in the cell: enum 12.2(0),
maxDlAmrRateConfigured FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Speech Call Management AMR N.A. Enumerate 12,2 33863 Initialisation of AMR DL Rate from OMC UA5.1
10.2(1), 7.95(2), 7.4(3), 6.7(4), 5.9(5), 5.15(6), 4.75(7)
This parameter specifies the max DL bit rate, which may be allocated at service
establishment time (RANAP RAB Assignment request) or after a relocation
<RadioAccessService>-<DedicatedConf>- RB adaptation based on traffic: DL and UL
maxDlEstablishmentRbRate CacConfClass 3 RNC none customer_tuning Radio Call Admission Control Rate Capping (RANAP Relocation request
Kbits/s Integer 8 2048 384 27330 UA4.2
<CacConfClass> with start @64kbit/s
This parameter is significant for Interactive/background traffic class and
<RadioAccessService>-<DedicatedConf>-
it specifies Maximum allowed power on F-DPCH.
maxDlPower CommonEdchFdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH dB Float -35.0 15.0 0.1 -5.0 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchFdpchInfo>
<RadioAccessService>-<DedicatedConf>-
maxDlRateHsdpaAndDchToDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max UL rate during RB reconfiguration from HSDPA/DCH to DCH/DCH N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>-
maxDlRateHsdpaAndEdchToDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max DL rate during RB reconfiguration from HSDPA/E-DCH to DCH/DCH N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>-
maxDlRateRabEstablishDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max DL rate during RAB establishment on DCH/DCH. N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>- Max DL rate during state transition from Cell_FACH or XX_PCH to Cell_DCH with
maxDlRateTransitionToDchDlTriggerDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping> a downlink trigger onto DCH/DCH
<RadioAccessService>-<DedicatedConf>- Max DL rate during state transition from Cell_FACH or XX_PCH to Cell_DCH with
maxDlRateTransitionToDchUlTriggerDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping> an uplink trigger onto DCH/DCH
<RNC>-<NodeB>-<FDDCell>-
This parameter defines the maximum number of times a retry DL SYNC frame for
maxDlSyncRetries CchDlTimingAdjustmentParams 2 RNC <MbmsResourceClass2>- partial system_restricted Radio Synchronisation Iub Synchronisation N.A. Integer 5 100 5 31868 MBMS Broadcast UA7.1
initial synchronization of a radio link
<CchDlTimingAdjustmentParams>
Maximum number of times a retry DL SYNC frame for initial synchronization of a
maxDlSyncRetries DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation N.A. Integer 5 100 5 0 none UA2.1
radio link.
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>- Maximum number of times a retry DL SYNC frame for initial synchronization of a
maxDlSyncRetries FACH 2 RNC partial system_restricted Radio Synchronisation Iub Synchronisation N.A. Integer 5 100 5 16717 RRC States Management UA3.0
<FACH> radio link.
Maximum number of times a retry DL SYNC frame for initial synchronization of a
maxDlSyncRetries PCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Synchronisation Iub Synchronisation N.A. Integer 5 100 5 16717 RRC States Management UA3.0
radio link.
TS 25.433 Maximum DL power
maximum power NodeB can allocate to the call.
<RadioAccessService>-<DedicatedConf>- QoS differentiation based on TC, ARP and
maxDlTxPowerPerOls DlUsPowerConf 3 RNC none expert_tuning Radio Power Management Power Control It represents a power level relative to the Pcpich power.
dB Float -35 15 0,1 N.A. 25080 UA5.0
<PowerConfClass>-<DlUsPowerConf> THP
For the first foreseen algorithm, which allows RNC to reserve MaxDlTxPower-
Delta for a call establishment, some considera
This parameter represents 100 + the proportion of power due to other external
cells for the specified cell.
maxEdchCommonChannelPower EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA Power Control Value 100 or below 100 indicates deactivation the feature and Mac-e scheduler N.A. Float -35 200 0,1 0 29840 Commercial Hsupa introduction UA5.0
will use RTWP values for UL Load estimation
For example, maxEdchCommo
Maximum IP frame size (including IP headers) used by the LRCE as target for the
IP frame size for CT UDP traffic from LRCE to TCE.
maxFrameSize CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace bytes Integer 512 1500 1 1500 162427 LRCE 3G Call Trace (End-to-End) LR Future
This target can be exceeded if & when necessary and appropriate.
This parameter is expected to be set to the actual MTU (M
indicates the maximum size of the UDP Mux frame (such that there will be no
maxFrameSize UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused bytes Integer 576 1500 1 1500 89716 UDP multiplexing on Iub (iBTS) Cancelled
segmentation between RNC and Node B).
indicates the maximum size of the UDP Mux frame (such that there will be no
maxFrameSize UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused bytes Integer 576 1500 1 1500 89716 UDP multiplexing on Iub (iBTS) Cancelled
segmentation between RNC and Node B).
This parameter defines the offset compared to maxTxPower for the maximum
<RadioAccessService>-<DedicatedConf>- transmission power to be allowed for HS-PDSCH, HS-SCCH and E-AGCH, E-
maxHspaPowerOffset HsdpaCellClass 3 RNC none expert_tuning Radio HSDPA Power Management dB Float 0 50 0,1 0 29808 Multi-carrier PA Power Pooling UA6.0
<HsdpaCellClass> RGCH and E-HICH codes over cell portion (as in TS 25.433 HS-PDSCH, HS-
SCCH, E-AGCH, E-RGCH and E-HICH Total Power
Defines the longest inactive period during which there is no data to transmit over
maximumBurstOffTime Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS ms Integer 0 655350 10 0 34195 Support OCNS with HSDPA UA6.0
the air interface.
Defines the longest active period during which data is transmitted over the air
maximumBurstOnTime Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS ms Integer 0 655350 10 100 34195 Support OCNS with HSDPA UA6.0
interface.
maximumClusterSize Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS For data modeOfOperation only N.A. Integer 1 256 1 34195 Support OCNS with HSDPA UA6.0
The number of reporting levels is given by the controlling eNB to the serving RNC
in the IE Number Of Measurement Reporting Levels received in the RAN-
Cell load exchange for I-RAT mobility from
maximumNumberOfReportingLevelsInSonTransfer FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility LTE INFORMATION-REQUEST Application Container for the SON Transfer N.A. Integer 1 10 1 4 155968 LR13.1
LTE
Application.
To avoid too much signalling
Maximum number of HSDPA users allowed on this cell class simultaneously
<RadioAccessService>-<DedicatedConf>-
maximumNumberOfUsers HsdpaCellClass 3 RNC none expert_tuning Radio HSDPA Capacity (When the value is se to 100 the RNC CAC is deactivated, i.e. NodeB performs N.A. Integer 0 100 100 80062 Multi-Rab Handling on HSDPA UA5.0
<HsdpaCellClass>
the Call Admission Control).
maximumThinkTime Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS For data modeOfOperation only ms Integer 0 655350 10 0 34195 Support OCNS with HSDPA UA6.0
The maximum current range used to detect a failure of the TMA. Different TMA
<BTSEquipment>-<AntennaAccess>-
maximumTmaCurrentWindow TmaCurrentWindow 3 BTS none expert_tuning BTS Unused vendors each have different current ranges. Min TMA Current Threshold < Max mA Integer 100 750 220 79305 d2U support of commercial ATT TMAs Cancelled
<TmaCurrentWindow>
TMA Curernt Threshold.
<RadioAccessService>-
The Core-requested Maximum Bit Rate is bounded by this range.
Kbytes/
maximumTokenGenerationRate DlSourceConformanceInformation 3 RNC <SourceConformanceConf>- none expert_tuning Radio HSDPA Source Conformance Integer 1 32000 500 29840 Commercial Hsupa introduction UA5.0
Unit is Kbytes/s. s
<DlSourceConformanceInformation>
This parameter defines the upper bound for the the Core Network requested
MbmsDlSourceConformanceInfor Kbytes/
maximumTokenGenerationRate 3 RNC none system_restricted Radio Broadcast Services MBMS Maximum Bit Rate. Integer 0 2000 1 500 31868 MBMS Broadcast UA7.1
mation s
Unit is Kbytes/s.
<RadioAccessService>-
Kbytes/
maximumTokenGenerationRate UlSourceConformanceInformation 3 RNC <SourceConformanceConf>- none expert_tuning Radio HSUPA Source conformance The Core-requested Maximum Bit Rate is bounded by this range. Integer 1 32000 500 29840 Commercial Hsupa introduction UA5.0
s
<UlSourceConformanceInformation>
This attribute (Max.Init.Retransmits in RFC 2960) specifies the maximum number
maxInitRetransmission SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none system_restricted Transport IP of retransmissions of a packet during the establishment of an SCTP association N.A. Integer 1 32 1 N.A. 27649 Native IP Iub support UA7.1
after the retransmission timer expires.
Maximum size of an Iub HS-DSCH Frame excluding all headers and tails of the
maxIubHsDschFrameSize HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none expert_tuning Radio HSDPA Capacity bytes Integer 0 1520 1472 27932 HSDPA Step1 UA4.2
transport layer protocol such as ATM or IP headers.
This parameter represents the maximum number of credits that a Mac-C can
allocate to a Mac-D for a given SPI as defined in TS 25.433), i.e per Priority
<RadioAccessService>-<DedicatedConf>- Queue, for a UE in CELL_FACH state.
maxMacDCredit CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none expert_tuning Radio Power Management FACH N.A. Integer 0 255 10 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<CommonPriorityQueue> Unit is in Mac-C SDU.
This parameter defines the Maximum Number of Bits per MAC-e PDU for Non-
<RadioAccessService>-<UlRbSetConf>- scheduled Transmission (25.433 section 9.2.2.13.Dm).
maxMacePduContentsSizeForNonScheduledModeTti10 EdchParameters 3 RNC none system_restricted Radio HSUPA Scheduler bits Integer 1 1096 1 162 29810 Fractional DPCH - SRB over HSPA UA8.1
<EdchParameters> This parameter is only used for Ul SRB mapped on E-DCH with non-scheduled
data mode.(10ms Tti)
This parameter defines the Maximum Number of Bits per MAC-e PDU for Non-
<RadioAccessService>-<UlRbSetConf>- scheduled Transmission (25.433 section 9.2.2.13.Dm).
maxMacePduContentsSizeForNonScheduledModeTti2 EdchParameters 3 RNC none system_restricted Radio HSUPA Scheduler bits Integer 1 1096 1 162 29810 Fractional DPCH - SRB over HSPA UA8.1
<EdchParameters> This parameter is only used for Ul SRB mapped on E-DCH with non-scheduled
data mode.(2ms Tti)
This parameter specifies the maximum number of bits per MAC-i PDU for Non-
<RadioAccessService>-<UlRbSetConf>-
maxMaciPduContentsSizeForNonScheduledModeTti10 EdchParameters 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation scheduled Transmission in 10ms TTI (for an E-DCH logical channel / a RB bits Integer 1 19982 1 168 89563 Enhanced L2 for Uplink LR13.3
<EdchParameters>
configured in Flexible RLC mode)
This parameter specifies the maximum number of bits per MAC-i PDU for Non-
<RadioAccessService>-<UlRbSetConf>-
maxMaciPduContentsSizeForNonScheduledModeTti2 EdchParameters 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation scheduled Transmission in 2ms TTI (for an E-DCH logical channel / a RB bits Integer 1 22978 1 168 89563 Enhanced L2 for Uplink LR13.3
<EdchParameters>
configured in Flexible RLC mode)
<BTSEquipment>-<MCTRX>- This is the maximum Power of the MC-TRX.Value fullMode means that the
maxMCTRXPowerAmplification PaResourceMCTRX 3 BTS none customer_setting Radio Power Management Configuration N.A. Enumerate fullMode 80499 3G Support of MC-TRX 900MHz UA7.1
<PaResourceMCTRX> hardware resource can be use at its full power.
This parameter defines the maximum number of EDCH credits allowed per eCEM
maxNbEdchCreditsForEcem BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio Call Admission Control HSUPA board. It is used as a threshold to limit the number of 2ms TTI users This N.A. Integer 0 128 128 125567 E-DCH enhanced NodeB CAC UA08.1
parameter does not apply to other CEM boards
This parameter defines the maximum number of EDCH credits allowed per xCEM
maxNbEdchCreditsForXcem BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio Call Admission Control HSUPA board. It is used as a threshold to limit the number of 2ms TTI users. This N.A. Integer 0 128 128 125567 E-DCH enhanced NodeB CAC UA08.1
parameter does not apply to other CEM boards
MaxNbEutraFreque
maxNbEutraFrequenciesToMonitor RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility LTE Maximum number of LTE frequencies monitored by the UE. N.A. Integer 1 2 100894 UMTS to LTE Handover LR14.2
nciesToMonitor
Defines the number of GPS Satellites (SV) for which GPS assistance data are
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- delivered to UE. This parameter is only relevant for GPS reference time and GPS
maxNbGpsSatellites 3 RNC none expert_tuning Radio Location Services N.A. Integer 4 12 18 27615 GPS assistance data developments UA7.1
gy <AGPSUeBasedLocationTechnology> acquisition assistance information, if integrated SMLC is depoyed. In a SAS
deployment scenario thi
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- Defines the maximum number of GPS Satellites (SV) for which navigation model
maxNbGpsSatFoNavModel 3 RNC none expert_tuning Radio Location Services N.A. Integer 4 16 1 16 27615 GPS assistance data developments UA7.1
gy <AGPSUeBasedLocationTechnology> assistance is delivered to UE per GPS position attempt
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- Defines the maximum number of GPS Satellites (SV) for which GPS almanac
maxNbGpsSatForAlmanac 3 RNC none expert_tuning Radio Location Services N.A. Integer 4 32 1 16 27615 GPS assistance data developments UA7.1
gy <AGPSUeBasedLocationTechnology> assistance is delivered to UE per GPS position attempt
Maximum number of monitored cells which must be accounted for in the non-SHO
compounding list algorithm.
maxNbMonitoredCellForNonShoCompoundList RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Mobility [SHO] N.A. Integer 0 6 4 21295 Enhanced Cell Coverage Location Report UA3.0
0 allows to keep the same algorithm than in V3 (only the neighborhood of the
primary cell is sent in the Rrc Meas Ctrl)
Cell load exchange for I-RAT mobility from
maxNbOfRimContextForSonTransfer FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Unused Defines the maximum number of RIM context for SON transfer N.A. Integer 1 100 1 32 155968 LR13.1
LTE
maxNbOfSessionPerCell MbmsResourceClass 3 RNC none system_restricted Radio Broadcast Services MBMS This parameter defines the maximum number of MBMS sessions in the cell N.A. Integer 0 10 3 31868 MBMS Broadcast UA7.1
<RadioAccessService>-<DedicatedConf>-
FullEventRepCritEvent1AWithoutI <MeasurementConfClass>-
maxNbReportedCells 3 RNC none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
ur <FullEventRepCritHhoMgt>-
<FullEventRepCritEvent1AWithoutIur>
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event1A in Full Event Mode.For Calls : the new value of the parameter has to be
maxNbReportedCells1A FullEventRepCritShoMgtEvent1A 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- taken into account in the life of a call, at the next RRC Measurement Control to
<FullEventRepCritShoMgtEvent1A> configure or reconf
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event1B in Full Event Mode.The new value of the parameter has to be taken into
maxNbReportedCells1B FullEventRepCritShoMgtEvent1B 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- account in the life of a call, at the next RRC Measurement Control to configure or
<FullEventRepCritShoMgtEvent1B> reconfigure the Ev
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event1C in Full Event Mode The new value of the parameter has to be taken into
maxNbReportedCells1C FullEventRepCritShoMgtEvent1C 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- account in the life of a call, at the next RRC Measurement Control to configure or
<FullEventRepCritShoMgtEvent1C> reconfigure the Ev
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event1D in Full Event Mode.The new value of the parameter has to be taken into
maxNbReportedCells1D FullEventRepCritShoMgtEvent1D 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- account in the life of a call, at the next RRC Measurement Control to configure or
<FullEventRepCritShoMgtEvent1D> reconfigure the Ev
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event1E in Full Event Mode.For Calls : the new value of the parameter has to be
maxNbReportedCells1E FullEventRepCritShoMgtEvent1E 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- taken into account in the life of a call, at the next RRC Measurement Control to
<FullEventRepCritShoMgtEvent1E> configure or reconf
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event1F in Full Event Mode.The new value of the parameter has to be taken into
maxNbReportedCells1F FullEventRepCritShoMgtEvent1F 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- account in the life of a call, at the next RRC Measurement Control to configure or
<FullEventRepCritShoMgtEvent1F> reconfigure the Ev
<RadioAccessService>-<DedicatedConf>-
<MeasurementConfClass>- Maximum Number of reported Cells to configure in Reporting Cell Status for
maxNbReportedCells1J FullEventRepCritShoMgtEvent1J 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Integer 1 6 3 32076 E-DCH Macro Diversity Support UA6.0
<FullEventRepCritShoMgt>- Event 1J in Event 1J mode
<FullEventRepCritShoMgtEvent1J>
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event2D in Full Event Mode.The new value of the parameter has to be taken into
maxNbReportedCells2D FullEventRepCritHhoMgtEvent2D 3 RNC none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritHhoMgt>- account in the life of a call, at the next RRC Measurement Control to configure or
<FullEventRepCritHhoMgtEvent2D> reconfigure the Ev
<RadioAccessService>-<DedicatedConf>- Maximum Number of reported Cells to configure in Reporting Cell Status for
<MeasurementConfClass>- Event2F in Full Event Mode.The new value of the parameter has to be taken into
maxNbReportedCells2F FullEventRepCritHhoMgtEvent2F 3 RNC none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] N.A. Integer 1 6 3 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritHhoMgt>- account in the life of a call, at the next RRC Measurement Control to configure or
<FullEventRepCritHhoMgtEvent2F> reconfigure the Ev
<RadioAccessService>-<DlRbSetConf>-
maxNbRetries IuCsTimingAlignment 3 RNC none system_restricted Radio Synchronisation Iu-CS Timing Alignment Maximum number of retries for time alignment request. N.A. Integer 0 255 N.A. 22788 Iu-CS Timing Alignment UA3.1
<IuCsTimingAlignment>
<RadioAccessService>-<RlcConfClass>- TS 25.331 MAX_RST
L2 improvements support (RLC & MAC-hs/e
maxNbrOfResetRetrans DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols N.A. Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> The maximum number of retransmissions of the RESET PDU S/W for improved RLC)
<RadioAccessService>-<RlcConfClass>- TS 25.331 MAX_RST
maxNbrOfResetRetrans DlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][DL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> The maximum number of retransmissions of the RESET PDU
<RadioAccessService>-<RlcConfClass>- TS 25.331 MAX_RST
maxNbrOfResetRetrans UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation N.A. Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> The maximum number of retransmissions of the RESET PDU
<RadioAccessService>-<RlcConfClass>- TS 25.331 MAX_RST
maxNbrOfResetRetrans UlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][UL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode> The maximum number of retransmissions of the RESET PDU
<RadioAccessService>-<DedicatedConf>- This parameter is the maximum credit allowed per NodeB credit allocation
maxNodebCreditAllowed CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none customer_init Radio Power Management FACH interval. N.A. Integer 0 65535 65535 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<CommonPriorityQueue> (65535=unlimited) 168710
<RadioAccessService>-<DedicatedConf>-
maxNrOfEagch EdchCellClass 0 RNC none expert_tuning Radio HSUPA Configuration Maximum number of E-AGCH chanellisation codes for one cell. N.A. Integer 1 6 1 29840 Commercial Hsupa introduction UA5.0
<EdchCellClass>
<RadioAccessService>-<DedicatedConf>-
maxNrOfErgchEhich EdchCellClass 0 RNC none expert_tuning Radio HSUPA Configuration Maximum number of E-HICH chanellisation codes for one cell. N.A. Integer 1 6 1 29840 Commercial Hsupa introduction UA5.0
<EdchCellClass>
<RNC>-<NodeB>-<FDDCell>- This parameter defines the maximum number of allowed MBMS PtM
maxNrOfMbmsPtmNeighbourCells MbmsResourceClass3 3 RNC none expert_tuning Radio Broadcast Services MBMS N.A. Integer 0 32 6 31868 MBMS Broadcast UA7.1
<MbmsResourceClass3> Neighbouring Cells over MCCH
<RadioAccessService>-<DedicatedConf>- Maximum number of active E-DCH users per cell to allow OLPC for switching to
maxNumActiveEdchUsersPerCellForS1 EdchCellClass 3 RNC none expert_tuning Radio HSUPA Power Control N.A. Integer 0 64 1 34249 E-DCH Adaptative HARQ Control UA6.0
<EdchCellClass> state S1 (low number of target transmissions) if the actual uplink cell load permits
Maximum number of active E-DCH users per cell to allow OLPC for switching to
<RadioAccessService>-<DedicatedConf>-
maxNumActiveEdchUsersPerCellForS2 EdchCellClass 3 RNC none expert_tuning Radio HSUPA Power Control state S2 (medium number of target transmissions) if the actual uplink cell load N.A. Integer 0 64 3 34249 E-DCH Adaptative HARQ Control UA6.0
<EdchCellClass>
permits
This parameter defines the maximum number of current active E-DCH users for
maxNumActiveUsersForCac2ms EdchResource 3 RNC <RNC>-<NodeB>-<FDDCell>-<EdchResource> none expert_tuning Radio HSUPA CAC accepting new 2ms TTI E-DCH PS RAB in CAC algorithm (in addition with the UL Integer 0 128 1 0 125855 E-DCH call retainability improvements UA08.1
radio load color criterium)
This configurable parameter allows the operator to provision the maximum
<RadioAccessService>- number of candidate neighbour cells that are allowed to be selected for automatic UTRAN Self Optimisation (CPICH auto
maxNumberOfCandidateCellsPcpichAutoAdj PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] N.A. Integer 1 32 1 5 123989 LR Future
<PcpichPowerAutoAdjConfClass> pcpichPower adjustment by the 100508/123989 UTRAN Self Optimisation (cell adjustment)
overload) feature.
Maximum number of Common E-DCH Resources (combined for all cells) per
board (e.g. eCEM board). This is to control the max number of shared E-DCH
maxNumberOfCommonEdchResourcesPerBoard BTSEquipment 0 BTS <BTSEquipment> critical customer_setting Radio Power Management FACH N.A. Integer 0 96 1 64 108103 Enhanced Cell Fach for DL and UL LR14.2
resources assigned for e-Cell_FACH users (i.e. max number of simultaneous
active eFACH UEs per board) and thus
Factor to scale the maximum number of CS voice over HSPA user at cell level :
maximum number of CS voice over HSPA = maxNumberOfCsHspaScalingFactor *
maxNumberOfCsHspaScalingFactor FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Speech Call Management Voice over HSPA % Integer 1 100 1 100 36247 Cs Voice over HSPA LR15.1
maxNumberOfVoiceHSPAUsers.
This parameter is available if the both feature VoIP and CS Voice over HSPA ar
Estimated maximum time that panic overload mechanism may take if it is Ue Audit Improvement: Tsuperv Timer too long
maxPanicOverloadPeriod RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Load Management UE call audit s Integer 0 2147483647 3 Q00813896 LR Future
triggered. - separate Cell_DCH and Cell_FACH cases
This attribute (Path.Max.Retrans in RFC 2960) specifies the maximum number of
<BTSEquipment>-<IpRan>-
maxPathRtx SctpAssociationParams 3 BTS none system_restricted Transport IP retransmission attempts for the path in an association before declare the N.A. Integer 1 32 13 27649 Native IP Iub support UA7.1
<SctpAssociationParams>
destination address is unreachable.
This attribute (Path.Max.Retrans in RFC 2960) specifies the maximum number of
maxPathRtx SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none system_restricted Transport IP retransmission attempts for the path in an association before declare the N.A. Integer 1 32 1 N.A. 27649 Native IP Iub support UA7.1
destination address is unreachable.
<RadioAccessService>- This parameter is used to limit the maximum power of the pCPICH for cells UTRAN Self Optimisation (CPICH auto
maxPcpichPowerToMaxTxPower PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] % Float 5.0 20.0 0.1 15.0 123989 LR Future
<PcpichPowerAutoAdjConfClass> whose pCPICH power is increased. adjustment)
ITU Q2130
maxPd NodeBSaalUniParams 0 RNC <RNC>-<NodeB>-<NodeBSaalUniParams> partial system_restricted Radio Protocols Maximum number of SD (Sequence Data) PDUs before transmission of a Poll N.A. Integer 0 2147483647 10 18855 UTRAN Sharing UA3.1
PDU"
<RadioAccessService>-<DedicatedConf>-
it specifies Maximum period for collision resolution phase. In terms of TTIs. NBAP E-DCH
maxPeriodForCollisionResolution CommonEdchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH Integer 8 24 1 15 108103 Enhanced Cell Fach for DL and UL LR14.2
& SIB5 TTI
<CommonEdchInfo>
External Document This is the maximum Power of the resource. Page 37 Alcatel-Lucent
maxPowerAmplification PaResource 3 BTS <BTSEquipment>-<PaResource> none customer_tuning Radio Power Management N.A. Enumerate fullMode 0 none UA7.0
Value fullMode means that the hardware resource can be used at its full power.
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
maxPowerCorrection EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio HSUPA dB Float -12,8 12,7 0,1 3 33481 E-AGCH Power Control UA5.1
This configurable parameter allows the operator to provision the maximum
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
maxPowerDifference PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] pcpichPower difference allowed between any two adjacent cells. This is used by dB Float 0.1 3.0 0.1 2.0 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
UTRAN Self Optimisation feature.
<RNC>-<NodeB>-<FDDCell>-
maxPowerForMtch MbmsResourceClass3 3 RNC none system_restricted Radio Broadcast Services MBMS This parameter defines the Maximum allowed power for MTCH traffic in the cell dBm Float 0 50 0,1 38 31868 MBMS Broadcast UA7.1
<MbmsResourceClass3>
This configurable parameter allows the operator to provision the maximum power
<RadioAccessService>- stepup, used, in each iteration, by the algorithm for automatic pcpichPower UTRAN Self Optimisation (CPICH auto
maxPowerStepUp PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] dB Float 0.1 3.0 0.1 2.0 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment of selected candidate neighbour cells, by the UTRAN Self adjustment)
Optimisation (cell overload) fea
Maximum power variation of OCNS power per user relative to its average power.
maxPowerVariation Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS dB Float 1 15 0,1 2 34195 Support OCNS with HSDPA UA6.0
Only used when the powerVariation is ON.
maxRateGrowth HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none expert_tuning Radio HSDPA Overestimation factor for allocated credits MAC-d PDU. N.A. Integer 4 16 8 27932 HSDPA Step1 UA4.2
Ue Audit Improvement: Tsuperv Timer too long
maxRrcIntraFreqPMReporting RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Load Management UE call audit The maximum interval of intra-Frequency measurements periodic reporting. s Integer 0 2147483647 64 Q00813896 LR Future
- separate Cell_DCH and Cell_FACH cases
<BTSEquipment>-<RemoteRadioHead>- This is the maximum Power of the RRH or TRDU.Value fullMode means that the
maxRrhPowerAmplification PaResourceRRH 3 BTS none customer_init Radio Power Management N.A. Enumerate fullMode 0 none UA7.0
<PaResourceRRH> hardware resource can be use at its full power.
Gives the maximal target for the (Signal to Interference Ratio (SIR)
<RadioAccessService>-<DedicatedConf>- gives the maximal target for the Sir allowed on the DPDCH.
maxSirTarget UlUsPowerConf 3 RNC none expert_tuning Radio Power Management Power Control dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA6.0
<PowerConfClass>-<UlUsPowerConf> It is based on the ressource allocation and on the maximum power that the UE is
allowed to transmit.
<RadioAccessService>-<DedicatedConf>-
Defines the max SIR target value when the UL of the PS RAB is mapped to E-
maxSirTargetEdch2ms UlUsPowerConfTti2ms 3 RNC <PowerConfClass>-<UlUsPowerConf>- none expert_tuning Radio Power Management Power Control dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA6.0
DCH with TTI 2ms
<UlUsPowerConfTti2ms>
<RadioAccessService>-<DedicatedConf>- Defines the maximum SIR target value when the DL of the PS RAB is mapped to
maxSirTargetHsdpa UlUsPowerConf 3 RNC none expert_tuning Radio HSDPA Power Control dB Float -8,2 17,3 0,1 10 34246 Power Control Enhancements UA6.0
<PowerConfClass>-<UlUsPowerConf> HSDPA
ITU Q2130
maxStat NodeBSaalUniParams 0 RNC <RNC>-<NodeB>-<NodeBSaalUniParams> partial system_restricted Radio Protocols N.A. Integer 0 2147483647 67 18855 UTRAN Sharing UA3.1
Maximum number of List Elements in a STAT (Solicited Status PDU)"
<RNC>-<CsCoreNetworkAccess>-
CSReceivingRanapOverloadContr
maxStep 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP It is the maximum filtering factor N.A. Integer 16 512 256 33804 Manual Overload Control UA5.0
ol
<CSReceivingRanapOverloadControl>
<RNC>-<PsCoreNetworkAccess>-
PSReceivingRanapOverloadContr
maxStep 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP It is the maximum filtering factor N.A. Integer 16 512 256 33804 Manual Overload Control UA5.0
ol
<PSReceivingRanapOverloadControl>
<RadioAccessService>-<DedicatedConf>- it specifies maximum Transport Block size to be used for UEs at cell edge to
maxTbSizeCellEdgeUsers CommonEdchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH optimise performance. It may be used by the sheduler in order to minimize the bits Integer 0 5000 1 2052 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchInfo> cell edge interference for cell edge users (and other users). NBAP.
<RadioAccessService>-<DedicatedConf>- it specifies maximum Transport Block size to be used for UEs at cell edge to
maxTbSizeOtherUsers CommonEdchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH optimise performance. It may be used by the sheduler in order to minimize the bits Integer 0 5000 1 4422 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchInfo> cell edge interference for cell edge users (and other users).
TS 25.433 Maximum transmission power
Maximum Transmission Power for all downlink channels added together allowed
Parameter Class Evolution in UA08 & UTRAN
maxTxPower FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Power Management Configuration on the cell on average, applied to the local cell Power.
dBm Float 0 50 0,1 45 80685 UA8.1
model simplification
MaxTxPower must imperatively be smaller than MaxDlPowerCapability which is
calculat
This parameter specifies the max UL bit rate, which may be allocated at service
establishment time (RANAP RAB Assignment request) or after a relocation
<RadioAccessService>-<DedicatedConf>- RB adaptation based on traffic: DL and UL
maxUlEstablishmentRbRate CacConfClass 3 RNC none customer_tuning Radio Call Admission Control Rate Capping (RANAP Relocation request
Kbits/s Integer 8 2048 64 27330 UA4.2
<CacConfClass> with start @64kbit/s
This parameter is significant for Interactive/background traffic class and
<RadioAccessService>-<DedicatedConf>- TS 25.433 Received total wide band power
maxUlInterferenceLevel CacConfClass 3 RNC none expert_tuning Radio Call Admission Control CAC dBm Float -112 -49,9 0,1 -50 0 none UA2.1
<CacConfClass> It corresponds to the received signal strength indicator
<RadioAccessService>-<DedicatedConf>-
maxUlRateHsdpaAndDchToDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max DL rate during RB reconfiguration from HSDPA/E-DCH to DCH/DCH N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>-
maxUlRateHsdpaAndEdchToDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max UL rate during RB reconfiguration from HSDPA/E-DCH to DCH/DCH N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>-
maxUlRateHsdpaAndEdchToHsdpaAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max UL rate during RB reconfiguration from HSDPA/E-DCH to HSDPA/DCH N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>-
maxUlRateRabEstablishDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max UL rate during RAB establishment on DCH/DCH. N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>-
maxUlRateRabEstablishHsdpaAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping Max UL rate during RAB establishment on HSDPA/DCH. N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping>
<RadioAccessService>-<DedicatedConf>- Max UL rate during state transition from Cell_FACH or XX_PCH to Cell_DCH with
maxUlRateTransitionToDchDlTriggerDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping> a downlink trigger onto DCH/DCH
<RadioAccessService>-<DedicatedConf>- Max UL rate during state transition from Cell_FACH or XX_PCH to Cell_DCH with
maxUlRateTransitionToDchDlTriggerHsdpaAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping> a downlink trigger onto HSDPA/DCH
<RadioAccessService>-<DedicatedConf>- Max UL rate during state transition from Cell_FACH or XX_PCH to Cell_DCH with
maxUlRateTransitionToDchUlTriggerDchAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping> an uplink trigger onto DCH/DCH
<RadioAccessService>-<DedicatedConf>- Max UL rate during state transition from Cell_FACH or XX_PCH to Cell_DCH with
maxUlRateTransitionToDchUlTriggerHsdpaAndDch DchRateCapping 3 RNC none expert_tuning Radio Call Admission Control Rate Capping N.A. Enumerate PS_64K 34227 State transitioning developments UA6.0
<CacConfClass>-<DchRateCapping> an uplink trigger onto HSDPA/DCH
Maximum number of times a retry UL SYNC frame for initial synchronization of a RB adaptation based on traffic: DL and UL
maxUlSyncRetries UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation N.A. Integer 0 255 5 27330 UA4.2
radio link. with start @64kbit/s
maxVoiceGbrForEnhancedScheduler BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio HSDPA Scheduler Maximum of the GBR range to identify Voice RAB for an enhance scheduling Kbits/s Integer 1 128 1 30 36247 Cs Voice over HSPA LR15.1
<RNC>-<NodeB>-<FDDCell>-
mbmsMcchClassId MbmsResourceClass2 2 RNC partial system_restricted Radio Broadcast Services MBMS N.A. ServiceLink N.A. 31868 MBMS Broadcast UA7.1
<MbmsResourceClass2>
This parameter allows to determine:
<RNC>-<NodeB>-<FDDCell>- • Whether a Neighboring cell of the SIB 11 intra-frequency neighboring list is
mbmsNeighbouringWeight UMTSFddNeighbouringCell 3 RNC none system_restricted Radio Mobility dB Float 0 24 0,5 0 31868 MBMS Broadcast UA7.1
<UMTSFddNeighbouringCell> candidate to be an MBMS neighboring (value greater than 0)
• The ranking by decreasing order of importance of the cell among the list of can
<RNC>-<NodeB>-<FDDCell>-
mbmsResourceClassId MbmsResourceClass2 2 RNC partial system_restricted Radio Broadcast Services MBMS N.A. ServiceLink N.A. 31868 MBMS Broadcast UA7.1
<MbmsResourceClass2>
This parameter defines the 3GPP TS 23.003 MBMS Service Area Identity
An MBMS SAI identifies a group of cells within a PLMN.
<RNC>-<NodeB>-<FDDCell>-
mbmsServiceAreaId MbmsResourceClass3 3 RNC none system_restricted Radio Broadcast Services MBMS A cell is addressable by one up to 8 MBMS SAIs N.A. ServiceLink N.A. 31868 MBMS Broadcast UA7.1
<MbmsResourceClass3>
Value 0 has a special meaning: it denotes the whole PLMN. It indicate to a
receivin
This parameter defines the discard timer for RLC-UM for MTCH. If transmission
mbmsTimerDiscard MbmsRlcUMode 3 RNC none system_restricted Radio Broadcast Services MBMS ms Enumerate timerDiscard160ms 31868 MBMS Broadcast UA7.1
time exceeds the configured value for a SDU, the SDU is discarded.
This threshold is used to select TTI based on the highest MBR of the available
<RadioAccessService>-<EdchRncConf>-
mbrThresholdForTtiSelection EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control EDCH PS RABs. Kbits/s Integer 0 5440 1 384 120363 Smart phone EDCH resource usage. LR13.1
<EdchRncSmartphoneConf>
Meaningful only if rabQosSmartEdchResourceUsageActivation is True
This parameter defines 3GPP TS 25.331 MCCH access information period
coefficient (a). The number of repetitions per modification period equals 2**a
mcchAccessInformationPeriodCoef MbmsMcchClass 0 RNC none system_restricted Radio Broadcast Services MBMS N.A. Integer 0 3 2 31868 MBMS Broadcast UA7.1
while the actual access information period, in number of frames, equals
McchModificationPeriod DIV 2**a
This parameter defines the number of radio frames (10ms) preceding the
mcchDeltaCfn MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS ms Integer 10 1000 10 10 31868 MBMS Broadcast UA7.1
beginning of the next MCCH period
This parameter defines 3GPP TS 25.331 MCCH modification period coefficient
mcchModificationPeriodCoef MbmsMcchClass 0 RNC none system_restricted Radio Broadcast Services MBMS (m). The actual modification period (McchModificationPeriod), in number of N.A. Integer 7 10 8 31868 MBMS Broadcast UA7.1
frames, equals 2**m
This parameter defines 3GPP TS 25.331 MCCH repetition period coefficient (r).
mcchRepetitionPeriodCoef MbmsMcchClass 0 RNC none system_restricted Radio Broadcast Services MBMS The number of repetitions per modification period equals 2**r while the actual N.A. Integer 0 3 1 31868 MBMS Broadcast UA7.1
repetition period, in number of frames, equals McchModificationPeriod DIV 2**r
<BTSEquipment>-<IpRan>-
mdLevel MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Value of the Maintenance Domain Level N.A. Integer 0 7 0 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
<BTSEquipment>-<IpRan>-
mdName MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Maintenance Domain Name N.A. HexString 2 86 N.A. 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
<BTSEquipment>-<IpRan>-
mdNameType MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Format of Maintenance Domain Name N.A. Enumerate NONE 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
The mean of the CQI values when the CQIs are generated by the generating
meanCqi OcnsHsdpa 2 RNC <RNC>-<NodeB>-<FDDCell>-<OcnsHsdpa> partial expert_tuning Radio Power Management OCNS function implemented in the scheduler. This value is valid if the user selects an N.A. Integer 1 30 20 34195 Support OCNS with HSDPA UA6.0
input value of CQI=0 to generate random CQI value for a given user.
<RadioAccessService>-<DedicatedConf>- Time interval to take an average or a variance on a traffic volume measurement.
measQtyAverageTime DchUlBoTrafVolMeas 3 RNC <MeasurementConfClass>- none expert_tuning Radio PS Call management RB Rate Adaptation - Buffer Note: only valid for Average RLC buffer payload and Variance of RLC buffer ms Integer 20 260 20 200 34227 State transitioning developments UA6.0
<DchUlBoTrafVolMeas> Payload measurement quantity.
<RadioAccessService>-<DedicatedConf>-
measQtyQty DchUlBoTrafVolMeas 3 RNC <MeasurementConfClass>- none expert_tuning Radio PS Call management RB Rate Adaptation - Buffer Measurement type for a traffic volume measurement. N.A. Enumerate rlcBufPayld 34227 State transitioning developments UA6.0
<DchUlBoTrafVolMeas>
This parameter determines how long to discard inter-freq handover measurement
reports for iMCTA Alarm triggers if two FDD frequencies are to be measured. iMCTA Enhanced with HSPA Load – Blind
measRepDiscardTimerAlarmFdd Imcta 3 RNC <RadioAccessService>-<Imcta> none expert_tuning Radio Mobility Measurements ms Integer 0 5000 100 0 89858 UA8.1
If compressed mode is required then compressed mode activation time is HHO – Direct HHO on AO Upsize
additionally taken into accoun
This parameter determines how long to discard inter-freq/inter-RAT handover
measurement reports for iMCTA Alarm triggers if both inter-freq and inter-RAT iMCTA Enhanced with HSPA Load – Blind
measRepDiscardTimerAlarmMultiRat Imcta 3 RNC <RadioAccessService>-<Imcta> none expert_tuning Radio Mobility Measurements ms Integer 0 5000 100 0 89858 UA8.1
measurements are configured. HHO – Direct HHO on AO Upsize
If compressed mode is required then compressed mode activation time is a
This parameter determines how long to discard inter-freq handover measurement
reports for iMCTA CAC triggers if two FDD frequencies are to be measured. iMCTA Enhanced with HSPA Load – Blind
measRepDiscardTimerCacFdd Imcta 3 RNC <RadioAccessService>-<Imcta> none expert_tuning Radio Mobility Measurements ms Integer 0 5000 100 0 89858 UA8.1
If compressed mode is required then compressed mode activation time is HHO – Direct HHO on AO Upsize
additionally taken into account.
<RNC>-<PsCoreNetworkAccess>- It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
minorToMajorStep PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP message from RNC to CN when the RNC overload level goes from Minor to N.A. Integer 0 16 3 33804 Manual Overload Control UA5.0
<PSSendingRanapOverloadControl> Major.
minPowerCorrection EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio HSUPA dB Float -12,8 12,7 0,1 3 33481 E-AGCH Power Control UA5.1
This parameter is used when the RNC determines a service profile for RAB
modification of a RAB with a Guaranteed bit rate. Any service profile
minRateForRABmodification RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Channels & Bearers RAB negotiation Kbits/s Integer 0 384 16 34226 RNC initiated RAB modification UA6.0
corresponding to a Guaranteed bit rate of minRateForRABmodification or lower in
the direction of modification wi
Sampling threshold (i.e., minimum number of events) for the detection of
<RadioAccessService>- overloaded cells in SON area: if the number of RB attempts over the SON UTRAN Self Optimisation (CPICH auto
minRbAttemptsForOverload PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] Integer 0 65535 1 0 123989 LR Future
<PcpichPowerAutoAdjConfClass> session monitoring window is lower than this parameter value, the cell cannot be adjustment)
selected as overloaded.
it specifies Minimum reduced E-DPDCH gain factor for common E-DCH
<RadioAccessService>-<DedicatedConf>- operation. If the configurable reduced E-DPDCH gain factor is not supported by
minReducedEdpdchGainFactor CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH the UE, the 3GPP default value of 8/15 is used. N.A. Enumerate 15_15 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
Define the minimum reduced E-DPDCH gain factor for SRB and non-voice TRB
minReducedEdpdchGainFactorNonVoiceTti10 EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Speech Call Management Voice over HSPA N.A. Enumerate 8_15 36247 Cs Voice over HSPA LR15.1
over E-DCH TTI 10ms.
Define the minimum reduced E-DPDCH gain factor for SRB and non-voice TRB
minReducedEdpdchGainFactorNonVoiceTti2 EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Speech Call Management Voice over HSPA N.A. Enumerate 8_15 36247 Cs Voice over HSPA LR15.1
over E-DCH TTI 2ms.
Define the minimum reduced E-DPDCH gain factor for voice TRB over E-DCH TTI
minReducedEdpdchGainFactorVoiceTti10 EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Speech Call Management Voice over HSPA N.A. Enumerate 30_15 36247 Cs Voice over HSPA LR15.1
10ms.
Define the minimum reduced E-DPDCH gain factor for voice TRB over E-DCH TTI
minReducedEdpdchGainFactorVoiceTti2 EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Speech Call Management Voice over HSPA N.A. Enumerate 60_15 36247 Cs Voice over HSPA LR15.1
2ms.
<RadioAccessService>-<DedicatedConf>-
minReduceRateDlDch CacConfClass 3 RNC none expert_tuning Radio PS Call management The minimum DCH downlink data rate for service triggered data rate downgrade. N.A. Enumerate PS_8K 34227 State transitioning developments UA6.0
<CacConfClass>
<RadioAccessService>-<DedicatedConf>-
minReduceRateUlDch CacConfClass 3 RNC none expert_tuning Radio PS Call management The minimum DCH uplink data rate for service triggered data rate downgrade. N.A. Enumerate PS_8K 34227 State transitioning developments UA6.0
<CacConfClass>
TS 25.433 ul sir target
used for the uplink inner loop and used to initialize the outer loop.
<RadioAccessService>-<DedicatedConf>-
minSirTarget UlUsPowerConf 3 RNC none expert_tuning Radio Power Management Power Control It corresponds to the ratio Eb/N0.
dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA6.0
<PowerConfClass>-<UlUsPowerConf>
It is specified according to service class and desired QoS on the TrCH(s) within
the DPCCH. Its value is based on average f
<RadioAccessService>-<DedicatedConf>-
Defines the min SIR target value when the UL of the PS RAB is mapped to E-
minSirTargetEdch2ms UlUsPowerConfTti2ms 3 RNC <PowerConfClass>-<UlUsPowerConf>- none customer_setting Radio Power Management Power Control dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA8.1
DCH with TTI 2ms
<UlUsPowerConfTti2ms>
<RadioAccessService>-<DedicatedConf>- Defines the minimum SIR target value when the DL of the PS RAB is mapped to
minSirTargetHsdpa UlUsPowerConf 3 RNC none customer_tuning Radio HSDPA Power Control dB Float -8,2 17,3 0,1 N.A. 34246 Power Control Enhancements UA6.0
<PowerConfClass>-<UlUsPowerConf> HSDPA
<RadioAccessService>-<DedicatedConf>-
When stealing has been triggered, the RNC starts this timer during which
minTimeBeforeReallocationOfHsPdsch HsPdschDynamicManagement 3 RNC <HsdpaCellClass>- none expert_tuning Radio HSDPA Codes s Integer 0 3600 60 29800 Dynamic DL Code Tree Mgt For HSDPA UA5.0
reallocation is forbidden but stealing is allowed.
<HsPdschDynamicManagement>
<RadioAccessService>-<HsdpaRncConf>-
minTimeBetweenRequest HsDschFlowInformation 3 RNC none system_restricted Radio HSDPA Flow control Information related to flow control mechanism between mac-D entity and mac-hs N.A. Integer 0 65535 500 27932 HSDPA Step1 UA4.2
<HsDschFlowInformation>
The minimum time prior to the activation/commit time that the Iu rate control
minTimePerfIURateCtrl CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none system_restricted Radio Speech Call Management AMR procedure is performed during a transport channel reconfiguration as part of an ms Integer 0 2550 10 100 34216 High speech capacity with AMR monorate UA6.0
AMR codec rate change.
minUeRelForSrb5Amr RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management AMR Minimum UE release to setup SRB 5 N.A. Enumerate rel5 18717 AMR Rate Adaptation UA5.0
minVoiceGbrForEnhancedScheduler BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio HSDPA Scheduler Minimum of the GBR range to identify Voice RAB for an enhance scheduling Kbits/s Integer 1 128 14 36247 Cs Voice over HSPA LR15.1
TS 25.331 Missing PU Indicator
<RadioAccessService>-<RlcConfClass>- L2 improvements support (RLC & MAC-hs/e
misPuIndic DlRlcAckFlexibleMode 3 RNC none system_restricted Radio Protocols Value true indicates that receiver should send a STATUS report for each missing N.A. Boolean VRAI 34388 UA7.0
<DlRlcAckFlexibleMode> S/W for improved RLC)
PU that is detected
TS 25.331 Missing PU Indicator
<RadioAccessService>-<RlcConfClass>-
misPuIndic DlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][DL] Value true indicates that receiver should send a STATUS report for each missing N.A. Boolean VRAI 16717 RRC States Management UA3.0
<DlRlcAckMode>
PU that is detected
TS 25.331 Missing PU Indicator
<RadioAccessService>-<RlcConfClass>-
misPuIndic UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation Value true indicates that receiver should send a STATUS report for each missing N.A. Boolean true 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode>
PU that is detected
TS 25.331 Missing PU Indicator
<RadioAccessService>-<RlcConfClass>-
misPuIndic UlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][UL] Value true indicates that receiver should send a STATUS report for each missing N.A. Boolean VRAI 16717 RRC States Management UA3.0
<UlRlcAckMode>
PU that is detected
<RadioAccessService>-<DedicatedConf>-
Penalty coefficient which is subtraced to the last received cpich Ec/N0
missedEcNoMeasurementPenalty MissingMeasurement 3 RNC <MeasurementConfClass>-<RRCMeasurement>- none expert_tuning Radio Mobility [SHO] dB Float 0 24 0,5 1 0 none UA2.0
measurement to replace a missing one.
<MissingMeasurement>
<RadioAccessService>-<DedicatedConf>-
Penalty coefficient which is subtracted to the last received cpich RSCP
missedRscpMeasurementPenalty MissingMeasurement 3 RNC <MeasurementConfClass>-<RRCMeasurement>- none expert_tuning Radio Mobility [SHO] dB Integer 0 90 1 0 none UA2.0
measurement to replacde a missing one.
<MissingMeasurement>
This attribute provides the RNC MAC Logical channel Priority (MLP) associated
<RadioAccessService>-<TrafficClassBasedQos>- QoS differentiation based on TC, ARP and
mlp ThpBasedQos 3 RNC none customer_tuning Radio PS Call management QoS Differentiation to a given TrafficClassBasedQoS,/ARPBasedQoS/THPBasedQoS instances N.A. Integer 1 8 N.A. 25080 UA5.0
<ArpBasedQos>-<ThpBasedQos> THP
combination.
TS 25.321 Mmax
<RNC>-<NodeB>-<FDDCell>-<RACH>- Maximum number of preamble cycles
mMax RachTxParameters 3 RNC none system_restricted Radio Channels & Bearers RACH N.A. Integer 1 32 4 20649 Online modification of UTRAN parameters UA3.0
<RachTxParameters> To exceed the maximum number of preamble ramping cycles Mmax involves the
failure of RACH transmission.
TS23.003 subclause 4.1(release 1999)
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
<RadioAccessService>-<NationalRoaming>-
mobileCountryCode AllowedPlmnId 3 RNC none customer_init Radio Design National Roaming The value of the MCC is the same as the three digit MCC contained in N.A. BcdString 3 3 N.A. 21091 IMSI Based Handover UA3.0
<ImsiPlmnAccessRight>-<AllowedPlmnId>
international mobile subscriber identity (IMSI).
mobileCountryCode
TS23.003 subclause 4.1(release 1999)
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_init Radio Design The value of the MCC is the same as the three digit MCC contained in N.A. BcdString 3 3 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
international mobile subscriber identity (IMSI)
mobileCountryCode p
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
The value of the MCC is the same as the three digit MCC contained in
mobileCountryCode CorrespondingRnc 3 RNC <RNC>-<LteNeighbour>-<CorrespondingRnc> none customer_init Radio Mobility LTE N.A. BcdString 3 3 N.A. 100894 UMTS to LTE Handover LR14.2
international mobile subscriber identity (IMSI).
mobileCountryCode parameter is a 3 digits BCD-string (ea
TS23.003 subclause 4.1(release 1999)
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode CsCoreNetworkAccess 0 RNC <RNC>-<CsCoreNetworkAccess> partial customer_init Radio Design The value of the MCC is the same as the three digit MCC contained in N.A. BcdString 3 3 N.A. 18855 UTRAN Sharing UA3.1
international mobile subscriber identity (IMSI)
mobileCountryCode p
Mobile Country Code, identifies the country in which the PLMN is located.
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode CsFlexService 0 RNC <RNC>-<CsFlexService> none customer_init Radio Design N.A. BcdString 3 3 N.A. 18855 UTRAN Sharing UA3.1
The value of the MCC is the same as the three digit MCC contained in
international mobile subscriber
TS23.003 subclause 4.1(release 1999)
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode FDDCell 0 RNC <RNC>-<NodeB>-<FDDCell> partial customer_init Radio Design The value of the MCC is the same as the three digit MCC contained in N.A. BcdString 3 3 N.A. 21295 Enhanced Cell Coverage Location Report UA3.0
international mobile subscriber identity (IMSI)
mobileCountryCode p
TS23.003
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode GSMCell 3 RNC <RNC>-<GSMNeighbour>-<GSMCell> none customer_init Radio Design The value of the MCC is the same as the three digit MCC contained in N.A. BcdString 3 3 N.A. 0 none UA1
international mobile subscriber identity (IMSI)
mobileCountryCode parameter is a 3 digits BCD-
TS23.003 subclause 4.1(release 1999)
<RadioAccessService>-<NationalRoaming>- Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode ImsiPlmnAccessRight 3 RNC none customer_init Radio Design National Roaming N.A. BcdString 3 3 N.A. 21091 IMSI Based Handover UA3.0
<ImsiPlmnAccessRight> The value of the MCC is the same as the three digit MCC contained in
international mobile subscriber identity (IMSI).
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
The value of the MCC is the same as the three digit MCC contained in
mobileCountryCode LtePlmn 3 RNC <RNC>-<LteNeighbour>-<LtePlmn> none customer_init Radio Mobility LTE N.A. BcdString 3 3 N.A. 100894 UMTS to LTE Handover LR14.2
international mobile subscriber identity (IMSI).
mobileCountryCode parameter is a 3 digits BCD-string (ea
This parameter defines, in a PLMN id supported by the RNC in MOCN, the
mobileCountryCode Plmn 3 RNC <RNC>-<Plmn> none customer_init Radio Design MOCN mobileCountryCode parameter which is a 3 digits BCD-string (each digit is coded N.A. BcdString 3 3 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
on 4 bits, which results finally in a 12 bits-long string)
TS23.003 subclause 4.1(release 1999)
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode PsCoreNetworkAccess 0 RNC <RNC>-<PsCoreNetworkAccess> partial customer_init Radio Design The value of the MCC is the same as the three digit MCC contained in N.A. BcdString 3 3 N.A. 18855 UTRAN Sharing UA3.1
international mobile subscriber identity (IMSI)
mobileCountryCode p
Mobile Country Code, identifies the country in which the PLMN is located.
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode PsFlexService 0 RNC <RNC>-<PsFlexService> none customer_init Radio Design N.A. BcdString 3 3 N.A. 18855 UTRAN Sharing UA3.1
The value of the MCC is the same as the three digit MCC contained in
international mobile subscriber
TS23.003
Mobile Country Code (MCC) identifies the country in which the PLMN is located.
mobileCountryCode RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_init Radio Design The value of the MCC is the same as the three digit MCC contained in N.A. BcdString 3 3 N.A. 23076 RNC 2500 UA6.0
international mobile subscriber identity (IMSI)
mobileCountryCode parameter is a 3 digits BCD-
TS23.003 subclause 4.1(release 1999)
mobileNetworkCode of the network entity
<RadioAccessService>-<NationalRoaming>-
mobileNetworkCode AllowedPlmnId 3 RNC none customer_init Radio Design National Roaming Mobile Network Code (MNC) is a code identifying the PLMN in that country. The N.A. BcdString 2 3 N.A. 21091 IMSI Based Handover UA3.0
<ImsiPlmnAccessRight>-<AllowedPlmnId>
MNC takes the same value as the two or three digit MNC contained in IMSI.
mobileNetworkCode param
TS23.003
Mobile Network Code (MNC) is a code identifying the PLMN in that country. The
MNC takes the same value as the two or three digit MNC contained in IMSI
mobileNetworkCode Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_init Radio Design N.A. BcdString 2 3 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
mobileNetworkCode parameter is a 2 or 3 digits BCD-string (each digit is coded
on 4 bits, r
Mobile Network Code, uniquely identifies the PLMN within the country
Mobile Network Code (MNC) is a code identifying the PLMN in that country. The
mobileNetworkCode CsFlexService 0 RNC <RNC>-<CsFlexService> none customer_init Radio Design MNC takes the same value as the two or three digit MNC contained in IMSI
N.A. BcdString 2 3 N.A. 18855 UTRAN Sharing UA3.1
Mobile Network Code, uniquely i
External Document Page 40 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
TS23.003
Mobile Network Code (MNC) is a code identifying the PLMN in that country. The
MNC takes the same value as the two or three digit MNC contained in IMSI
mobileNetworkCode GSMCell 3 RNC <RNC>-<GSMNeighbour>-<GSMCell> none customer_init Radio Design N.A. BcdString 2 3 N.A. 0 none UA1
mobileNetworkCode parameter is a 2 or 3 digits BCD-string (each digit is coded
on 4 bits, r
Mobile Network Code, uniquely identifies the PLMN within the country
Mobile Network Code (MNC) is a code identifying the PLMN in that country. The
mobileNetworkCode PsFlexService 0 RNC <RNC>-<PsFlexService> none customer_init Radio Design MNC takes the same value as the two or three digit MNC contained in IMSI
N.A. BcdString 2 3 N.A. 18855 UTRAN Sharing UA3.1
Mobile Network Code, uniquely i
TS23.003
Mobile Network Code (MNC) is a code identifying the PLMN in that country. The
MNC takes the same value as the two or three digit MNC contained in IMSI
mobileNetworkCode RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_init Radio Design N.A. BcdString 2 3 N.A. 23076 RNC 2500 UA6.0
mobileNetworkCode parameter is a 2 or 3 digits BCD-string (each digit is coded
on 4 bits, r
This parameter is read when a HSDPA/HSUPA capable mobile has moved
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- through an Intra Freq Intra RNC SHO procedure.
intelligent Multi-Carrier Traffic Allocation
mobilityServiceForHsxpaEnable 3 RNC none customer_setting Radio Mobility [HHO][iMCTA] N.A. Boolean FAUX 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> If set to False, iMCTA is not triggered after the SHO.
(iMCTA)
If set to True iMCTA function may apply.
This parameter is read when a not-HSDPA/HSUPA capable mobile has moved
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- through an Intra Freq Intra RNC SHO procedure.
intelligent Multi-Carrier Traffic Allocation
mobilityServiceForNonHsxpaEnable 3 RNC none customer_setting Radio Mobility [HHO][iMCTA] N.A. Boolean FAUX 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> If set to False, iMCTA is not triggered after the SHO.
(iMCTA)
If set to True iMCTA function may apply.
This parameter defines the mobility service Type that matches with each Service Based Mobility parameters
mobilityServiceType DlUserService 3 RNC <RadioAccessService>-<DlUserService> none customer_setting Radio Mobility [HHO] N.A. Enumerate N.A. 33546 UA6.0
Downlink User Service. It is used as UsHoConf index id. enhancement
<RadioAccessService>-<UserServiceProfiles>- This parameter defines the mobility service Type that matches with each Service Based Mobility parameters
mobilityServiceType HsdpaCombination 3 RNC none expert_tuning Radio Mobility [HHO] N.A. Enumerate N.A. 33546 UA6.0
<HsdpaUserServiceProfile>-<HsdpaCombination> HsdpaCombination. enhancement
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- intelligent Multi-Carrier Traffic Allocation
mode 3 RNC none customer_setting Radio Mobility [HHO][iMCTA] Defines the iMCTA trigger to process. In any mode, Alarm Trigger is processed N.A. Enumerate AlarmOnly 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> (iMCTA)
<RNC>-<NeighbouringRNC>-
NeighbouringRNCIntelligentMultiC intelligent Multi-Carrier Traffic Allocation
mode 3 RNC <NeighbouringRNCIntelligentMultiCarrierTrafficAllo none customer_setting Radio Mobility [HHO][iMCTA] Defines the iMCTA trigger to process. In any mode, Alarm Trigger is processed N.A. Enumerate AlarmOnly 29415 UA5.0
arrierTrafficAllocation (iMCTA)
cation>
OneBTS & iBTS Node B co-existence under
modemCompatibilityMode BTSEquipment 0 BTS <BTSEquipment> none customer_setting BTS Modem Selection This parameter configures the x/eCEM in a special mode Enumerate icemMode 76827 LR Future
one RNC
The parameter allows to refine the potential choice between bCEM, eCEM and
modemPreference HsXpaResource 3 BTS <BTSEquipment>-<HsXpaResource> none expert_tuning BTS Modem Selection N.A. Enumerate N.A. 109344 bCEM SW introduction in WCDMA LR Future
xCEM after hspaHardwareAllocation choice
modeOfOperation Ocns 2 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> partial customer_tuning Radio Power Management OCNS Defines voice or data OCNS channel N.A. Enumerate data 34195 Support OCNS with HSDPA UA6.0
UTRAN Self Optimisation (CPICH auto
monitoringWindowSize SonSession 3 RNC <RadioAccessService>-<SonSession> none expert_tuning Radio Power Management [Common Channels] The size in multiple of 15 minutes periods of the SON session monitoring window. min Integer 1 96 1 1 123989 LR Future
adjustment)
This parameter is used when the UE has multiple I/B PS RABs present (Without
streaming) to determine whether the RNC releases a RAB after a period of
mpdpInactivityIuRelease AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none customer_setting Radio PS Call management MPDP N.A. Boolean FAUX 34170 3 PDP contexts support in UTRAN UA6.0
releaseTimerMpdpChannelType on the RAB (FALSE), or whether it releases the
whole Iu based upon inactivity
This parameter defines whether feature 96461 Support on d2U 9326 and Support on d2U 9326 and MSNodeB for ATT
multiplePdpContextParityRequirementsActivation BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Channels & Bearers MPDP MSNodeB for 34170 Multiple PDP Context Parity Requirements is activated or N.A. Boolean FAUX 96461 of 34170 Multiple PDP Context Parity UA7.1.3
not. Requirements
Indicates whether fixed or flexible positions of transport channels shall be used in
multiplexingPosition SccpchClass 0 RNC <RadioAccessService>-<SccpchClass> critical system_restricted Radio Channels & Bearers SCCPCH N.A. Enumerate N.A. 16717 RRC States Management UA3.0
the physical channel.
Enables multi rab bad radio conditions sub feature of the Smart EDCH resource
multiRabBadRadioSmartEdchResourceUsageActivation EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control usage feature for TTI selection. N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if smartEdchResourceUsageActivation is True
Enables multi rab bad radio conditions sub feature of the Smart phone EDCH
multiRabBadRadioSmartEdchResourceUsageActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Congestion Control resource usage feature for TTI selection. N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if smartEdchResourceUsageActivation is True
<RadioAccessService>-<DedicatedConf>- This value is used to calculate the number of frames taken into consideration Multi-Service RAB call drop reduction for
multiRabDlTxPowerAlpha DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB s Float 0 1 0,1 0,5 119418 UA8.1
<PowerConfClass>-<DlUsPowerConf> when determining if the Tx Power is good or bad Smartphone
This value is used to indicate a delta between the max DL tx power. When the
<RadioAccessService>-<DedicatedConf>- value gain after applying the delta is achieved at the NodeB dedicated Multi-Service RAB call drop reduction for
multiRabDlTxPowerNonVulnerableThresholdDelta DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB dB Float 0.0 56.5 0.5 1.5 119418 UA08.1
<PowerConfClass>-<DlUsPowerConf> measurements are triggered to indicate to the RNC the vulnerabilitity condition of Smartphone
the RL.
This value is sent to the NodeB to tell it the time to triggering NBAP dedicated
<RadioAccessService>-<DedicatedConf>- measurements due to multi RAB conditions to come out of the vulnerable state. Multi-Service RAB call drop reduction for
multiRabDlTxPowerNonVulnerableTimeToTrigger DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB s Mixed 0.5 60.0 0.1 5.0 119418 UA08.1
<PowerConfClass>-<DlUsPowerConf> If this value is set to 0, this means that the DL Tx Power is not used for DL Smartphone
vulnerability det
This value is used to indicate a delta between the max DL tx power. When the
<RadioAccessService>-<DedicatedConf>- value gain after applying the delta is achieved at the NodeB dedicated Multi-Service RAB call drop reduction for
multiRabDlTxPowerThresholdDeltaStart DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB dB Float 0 56,5 0,5 1 119418 UA8.1
<PowerConfClass>-<DlUsPowerConf> measurements are triggered to indicate to the RNC the vulnerabilitity condition of Smartphone
the RL.
This value is used to indicate a delta between the max DL tx power. When the
<RadioAccessService>-<DedicatedConf>- value gain after applying the delta is achieved at the NodeB dedicated Multi-Service RAB call drop reduction for
multiRabDlTxPowerThresholdDeltaStop DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB dB Float 0 56,5 0,5 1,5 119418 UA8.1
<PowerConfClass>-<DlUsPowerConf> measurements are triggered to indicate to the RNC the vulnerabilitity condition of Smartphone
the RL.
<RadioAccessService>-<DedicatedConf>- This value is sent to the NodeB to tell it the time to triggering NBAP dedicated Multi-Service RAB call drop reduction for
multiRabDlTxPowerTimeToTrigger DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB s Mixed 0,5 60 0,1 5 119418 UA8.1
<PowerConfClass>-<DlUsPowerConf> measurements due to multi RAB conditions. Smartphone
This value is used to indicate a delta between the max DL tx power. When the
<RadioAccessService>-<DedicatedConf>- value gain after applying the delta is achieved at the NodeB dedicated Multi-Service RAB call drop reduction for
multiRabDlTxPowerVulnerableThresholdDelta DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB dB Float 0.0 56.5 0.5 1.0 119418 UA08.1
<PowerConfClass>-<DlUsPowerConf> measurements are triggered to indicate to the RNC the vulnerabilitity condition of Smartphone
the RL.
This value is sent to the NodeB to tell it the time to triggering NBAP dedicated
<RadioAccessService>-<DedicatedConf>- measurements due to multi RAB conditions to go into the vulnerable state. Multi-Service RAB call drop reduction for
multiRabDlTxPowerVulnerableTimeToTrigger DlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB s Mixed 0.5 60.0 0.1 5.0 119418 UA08.1
<PowerConfClass>-<DlUsPowerConf> If this value is set to 0, this means that the DL Tx Power is not used for DL Smartphone
vulnerability detecti
This tells which measurement type is used to detect downlink vulnerability. DL
<RadioAccessService>- Multi-Service RAB call drop reduction for
multiRabDlVulnerabilityType MultiServiceRabManagement 3 RNC none customer_setting Radio Retainability Multi RAB vulnerability check can also be switched off using thos flag by setting it to N.A. Enumerate DlTxPower 119418 UA8.1
<MultiServiceRabManagement> Smartphone
DlVulnerabilityDisabled.
<RadioAccessService>-<DedicatedConf>-
Multi-Service RAB call drop reduction for
multiRabHysteresis2D MultiRabMgtEvent2D 3 RNC <HoConfClass>-<UsHoConf>-<MultiRabMgtEvent>- none customer_tuning Radio Retainability Multi RAB Hysteresis for the triggering of event 2D for multi RAB scenario. N.A. Float 0 7,5 0,5 0 119418 UA8.1
Smartphone
<MultiRabMgtEvent2D>
<RadioAccessService>-<DedicatedConf>-
Multi-Service RAB call drop reduction for
multiRabHysteresis2F MultiRabMgtEvent2F 3 RNC <HoConfClass>-<UsHoConf>-<MultiRabMgtEvent>- none customer_tuning Radio Retainability Multi RAB Hysteresis for the triggering of event 2F for multi RAB scenario. N.A. Float 0 7,5 0,5 0 119418 UA8.1
Smartphone
<MultiRabMgtEvent2F>
<RadioAccessService>- Indicates the amount of time waited before the release of existing PS calls occur Multi-Service RAB call drop reduction
multiRabPsReleaseTimer MultiServiceRabManagement 3 RNC none customer_setting Radio Retainability Multi RAB s Float 0.0 60.0 0.1 0.0 123648 LR Future
<MultiServiceRabManagement> after entering the vulnerable state. enhancement
MultiServiceRabManagementProfi <RNC>-<CellProfiles>- Indicates the amount of time waited before the release of existing PS calls occur Multi-Service RAB call drop reduction
multiRabPsReleaseTimer 3 RNC none customer_setting Radio Retainability Multi RAB s Float 0.0 60.0 0.1 0.0 123648 LR Future
le <MultiServiceRabManagementProfile> after entering the vulnerable state for this FDDCell. enhancement
Enables multi rab sub feature of the Smart EDCH resource usage feature for TTI
multiRabSmartEdchResourceUsageActivation EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_init Radio HSUPA Congestion Control selection, independent of radio conditions. N.A. Boolean false 125855 E-DCH call retainability improvements UA08.1
Meaningful only if smartEdchResourceUsageActivation is True
Enables multi rab sub feature of the Smart EDCH resource usage feature for TTI
selection, independent of radio conditions. This is the FDDCell MO equivalent of
multiRabSmartEdchResourceUsageActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Congestion Control N.A. Boolean false 125855 E-DCH call retainability improvements UA08.1
multiRabSmartEdchResourceUsageActivation.
Meaningful only if smartEdchResourceUsageActivation
Enables multi rab sub feature of the Smart EDCH resource usage feature for TTI
selection, independent of radio conditions. This is the RemoteFDDCell MO
multiRabSmartEdchResourceUsageActivation RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio HSUPA Congestion Control N.A. Boolean false 125855 E-DCH call retainability improvements UA08.1
equivalent of multiRabSmartEdchResourceUsageActivation.
Meaningful only if smartEdchResourceUsageActiv
<RadioAccessService>-<DedicatedConf>-
This value is sent to the UE to tell it the time that the 2D triggering threshold must Multi-Service RAB call drop reduction for
multiRabTimeToTrigger2D MultiRabMgtEvent2D 3 RNC <HoConfClass>-<UsHoConf>-<MultiRabMgtEvent>- none customer_tuning Radio Retainability Multi RAB ms Enumerate 1280 119418 UA8.1
be valid for before triggering an event 2D due to multi RAB conditions. Smartphone
<MultiRabMgtEvent2D>
<RadioAccessService>-<DedicatedConf>- This value is used to determine how long the thresholds that trigger a 2F
Multi-Service RAB call drop reduction for
multiRabTimeToTrigger2F MultiRabMgtEvent2F 3 RNC <HoConfClass>-<UsHoConf>-<MultiRabMgtEvent>- none customer_tuning Radio Retainability Multi RAB measurement report should be valid for before the report is triggered by the UE. ms Enumerate 1280 119418 UA8.1
Smartphone
<MultiRabMgtEvent2F> This saves the ping pong between 2D and 2F.
This parameter defines which measurement type is used to detect uplink
<RadioAccessService>- Multi-Service RAB call drop reduction
multiRabUlVulnerabilityType MultiServiceRabManagement 3 RNC none customer_setting Radio Retainability Multi RAB vulnerability. UL vulnerability check can also be switched off using this flag by N.A. Enumerate ulVulnerabilityDisabled 123648 LR Future
<MultiServiceRabManagement> enhancement
setting it to ulVulnerabilityDisabled.
<RadioAccessService>-<DedicatedConf>-
The weight to configure for the triggering of event 2D due to a multi RAB Multi-Service RAB call drop reduction for
multiRabWeight2D MultiRabMgtEvent2D 3 RNC <HoConfClass>-<UsHoConf>-<MultiRabMgtEvent>- none customer_tuning Radio Retainability Multi RAB N.A. Float 0 2 0,1 0 119418 UA8.1
scenario. Smartphone
<MultiRabMgtEvent2D>
<RadioAccessService>-<DedicatedConf>-
Multi-Service RAB call drop reduction for
multiRabWeight2F MultiRabMgtEvent2F 3 RNC <HoConfClass>-<UsHoConf>-<MultiRabMgtEvent>- none customer_tuning Radio Retainability Multi RAB The weight for triggering of event 2F N.A. Float 0 2 0,1 0 119418 UA8.1
Smartphone
<MultiRabMgtEvent2F>
Multi-Service RAB call drop reduction
multiServiceRabManagementProfileId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Retainability Multi RAB Service link N.A. ServiceLink N.A. 123648 LR Future
enhancement
TS 25.331 N300
n300 UeTimerCstIdleMode 3 RNC <RadioAccessService>-<UeTimerCstIdleMode> none system_restricted Radio Protocols RRC Timers It corresponds to the maximum number of retransmissions of the RRC N.A. Integer 0 7 7 16717 RRC States Management UA3.0
CONNECTION REQUEST message
<RadioAccessService>-
External
n301 Document UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers No definition available in R99 3gpp 25.331. Page 41 N.A. Integer 0 7 2 16717 RRC States Management UA3.0 Alcatel-Lucent
<UeTimerCstConnectedMode>
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
TS 25.331 N302
<RadioAccessService>-
n302 UeTimerCstConnectedMode 3 RNC none expert_tuning Radio Protocols RRC Timers Maximum number of retransmissions of the CELL UPDATE / URA UPDATE N.A. Integer 0 7 7 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
message if no answer of the network within T302
TS 25.331 N304
<RadioAccessService>-
n304 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers Maximum number of retransmissions of the UE CAPABILITY INFORMATION N.A. Integer 0 7 2 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
message
An IE of RRC Connection Release message; used by the UE to control the
n308 RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols RRC Timers maximum number of retransmission of RRC Connection Release Complete N.A. Integer 1 8 1 25588 Parameter Class evolution: UE timers user UA4.1
message.
TS 25.331 N310
<RadioAccessService>-
n310 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers Maximum number of retransmission of the PUSCH CAPACITY REQUEST N.A. Integer 0 7 4 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
message
<RadioAccessService>- TS 25.331 N312
n312 UeTimerCstConnectedMode 3 RNC none expert_tuning Radio Protocols RRC Timers N.A. Enumerate ueConst1 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> Maximum number of successive "in sync" received from L1.
TS 25.331 N312
n312 UeTimerCstIdleMode 3 RNC <RadioAccessService>-<UeTimerCstIdleMode> none expert_tuning Radio Protocols RRC Timers N.A. Enumerate ueConst1 16717 RRC States Management UA3.0
Maximum number of successive "in sync" received from L1.
TS 25.331 N313
Maximum number of successive "out of sync" received from L1.
<RadioAccessService>-
n313 UeTimerCstConnectedMode 3 RNC none expert_tuning Radio Protocols RRC Timers N.A. Enumerate n313_200 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> The UL NBAP Synchronization Parameters (FddCell.nOutSyncInd &
FddCell.tRLFailure) are strongly coupled with the DL RRC Synchronization
Parameters (UeTimerCstConnectedMode.N313
TS 25.331 N315
<RadioAccessService>-
n315 UeTimerCstConnectedMode 3 RNC none expert_tuning Radio Protocols RRC Timers Maximum number of successive "in sync" received from L1 during T313 is N.A. Enumerate ueConst1 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
activated.
<RadioAccessService>-<ServiceInit>- KPI - Support T351 & N351 and repeat RRC
n351 CallAccessPerformanceConf 3 RNC none expert_tuning Radio Accessibility RRC Quick Repeat Maximum number of retransmissions of rrcConnectionSetup at expiry of t351. N.A. Integer 0 4 1 Q00833038 UA4.1
<CallAccessPerformanceConf> Connection Setup
<RadioAccessService>-<ServiceInit>-
n354 CallAccessPerformanceConf 3 RNC none system_restricted Radio Protocols RRC Counters Max number of retransmission of ActiveSetUpdate N.A. Integer 0 10 0 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf>
<RadioAccessService>-<ServiceInit>-
n356 CallAccessPerformanceConf 3 RNC none system_restricted Radio Protocols RRC Counters Max number of retransmission of RrcConnectionRelease N.A. Integer 1 10 3 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf>
it specifies NACK Power Offset for common E-DCH HS-DPCCH operation
<RadioAccessService>-<DedicatedConf>- (ACK/CQI feedback).
nackPowerOffset CommonEdchHsdpcchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH NBAP & SIB5 N.A. Integer 0 8 1 7 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchHsdpcchInfo>
This parameter indicates Power offset used in the UL between the HS-DPCCH
nackPowerOffset HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none customer_tuning Radio HSDPA Power Control N.A. Integer 0 8 7 27932 HSDPA Step1 UA4.2
slot carrying HARQ NACK information and the associated DPCCH.
This parameter indicates the power offset used in the UL between the HS-
DPCCH slots carrying HARQ NACK information and the associated DPCCH in
nackPowerOffsetOneLeg HsdpaUserService 3 RNC <RadioAccessService>-<HsdpaUserService> none customer_tuning Radio HSUPA Power Control N.A. Integer 0 8 15 82602 E-DCH user and cell throughput increase UA8.1
case the adaptive feature is enabled and only one radio leg is in the DCH active
set.
nasIdentifier RadiusParameters 3 BTS <BTSEquipment>-<RadiusParameters> none customer_setting Radio Design N.A. String 0 128 N.A. 33278 Node B Security UA06 Development UA6.0
natpGlobalIpAddress NATP 0 BTS <BTSEquipment>-<NATP> critical customer_setting Radio Protocols N.A. IP4Address N.A. 33968 NAT-P enhancement UA6.0
natpGlobalNetworkMask NATP 0 BTS <BTSEquipment>-<NATP> critical customer_setting Radio Protocols N.A. IP4Address 255.255.255.0 33968 NAT-P enhancement UA6.0
natpInternalIpAddress NATP 3 BTS <BTSEquipment>-<NATP> none customer_setting Radio Protocols N.A. IP4Address N.A. 33968 NAT-P enhancement UA6.0
natpInternalNetworkMask NATP 3 BTS <BTSEquipment>-<NATP> none customer_setting Radio Protocols N.A. IP4Address 255.255.255.0 33968 NAT-P enhancement UA6.0
natpIpInterface NatpTable 3 BTS <BTSEquipment>-<NATP>-<NatpTable> none customer_setting Radio Protocols N.A. Enumerate localBTS 33968 NAT-P enhancement UA6.0
TS 25.321 Nbo1max
In case that a negative acknowledgement has been received on AICH, a backoff
<RNC>-<NodeB>-<FDDCell>-<RACH>-
nb01Max RachTxParameters 3 RNC none system_restricted Radio Channels & Bearers RACH timer TBO1 is started. Backoff timer TBO1 is set to an integer number NBO1 of N.A. Integer 0 50 30 20649 Online modification of UTRAN parameters UA3.0
<RachTxParameters>
10 ms time intervals, randomly drawn within an interval 0<NBO1min< NBO1<
NBO1max
TS 25.321 Nbo1min
In case that a negative acknowledgement has been received on AICH, a backoff
<RNC>-<NodeB>-<FDDCell>-<RACH>-
nb01Min RachTxParameters 3 RNC none system_restricted Radio Channels & Bearers RACH timer TBO1 is started. Backoff timer TBO1 is set to an integer number NBO1 of N.A. Integer 0 50 30 20649 Online modification of UTRAN parameters UA3.0
<RachTxParameters>
10 ms time intervals, randomly drawn within an interval 0<NBO1min< NBO1<
NBO1max
<RadioAccessService>-<DedicatedConf>-
This parameter defines the filter coefficient of NBAP common measurement
nbapCommonMeasRtwpFilterCoeff NbapMeasRtwpParameters 3 RNC <MeasurementConfClass>- none expert_tuning Radio HSUPA Measurements N.A. Enumerate 3 27745 UL Load Estimation UA5.0
RTWP reporting.
<NbapMeasRtwpParameters>
<RadioAccessService>-<DedicatedConf>-
This parameter defines the reporting period of r5 NBAP common measurement
nbapCommonMeasRtwpReportingPeriod NbapMeasRtwpParameters 3 RNC <MeasurementConfClass>- none expert_tuning Radio HSUPA Measurements ms Integer 10 3600000 10 10000 27745 UL Load Estimation UA5.0
RTWP reporting.
<NbapMeasRtwpParameters>
nbapTimerInMsec RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols NBAP Timer to cover all NBAP procedures to the NodeB. ms Integer 0 300000 100 40000 0 none UA7.1
Used to re-initialize the Iu transmission when too many AMR frames reached too
nbFramesTooEarlyBeforeResync CsHspaDejitter 3 RNC <RadioAccessService>-<CsHspaDejitter> none expert_tuning Radio Speech Call Management Voice over HSPA frames Integer 0 5 10 36247 Cs Voice over HSPA LR15.1
early. If the value is set to 0 then that means this mechanism is deactivated.
nbFramesTooEarlyBeforeResyncWindow CsHspaDejitter 3 RNC <RadioAccessService>-<CsHspaDejitter> none expert_tuning Radio Speech Call Management Voice over HSPA Window size of number too early accumulated in time ms Integer 10 200 10 60 36247 Cs Voice over HSPA LR15.1
Used to resynchronize the Iu transmission when AMR frames reached too late. If
nbFramesTooLateBeforeResync CsHspaDejitter 3 RNC <RadioAccessService>-<CsHspaDejitter> none expert_tuning Radio Speech Call Management Voice over HSPA frames Integer 0 5 10 36247 Cs Voice over HSPA LR15.1
the value is set to 0 then that means this mechanism is deactivated.
nbFramesTooLateBeforeResyncWindow CsHspaDejitter 3 RNC <RadioAccessService>-<CsHspaDejitter> none expert_tuning Radio Speech Call Management Voice over HSPA Window size of number too late accumulated in time ms Integer 10 200 10 60 36247 Cs Voice over HSPA LR15.1
nbNoFramesForReinitPhase CsHspaDejitter 3 RNC <RadioAccessService>-<CsHspaDejitter> none expert_tuning Radio Speech Call Management Voice over HSPA Used to launch a re-initialization phase of de-jitter like after a SID frame reception frames Integer 1 20 1 10 36247 Cs Voice over HSPA LR15.1
This parameter defines the threshold, in number of cells, from which a cell can be
considered as from surrounded.
nbOfCellsFromIsolatedToSurroundedThreshold MbmsResourceClass 3 RNC none system_restricted Radio Broadcast Services MBMS Any surrounding Cell being considered in the count are these, which are N.A. Integer 1 32 3 31868 MBMS Broadcast UA7.1
transmitting the MBMS service in PTM delivery mode.
The surrounding
Threshold value for the number of Cell update procedures -with cause "cell
reselection"- initiated
nbOfCellUpdatesFromCellPchToUraPch RadioAccessService 3 RNC <RadioAccessService> none customer_tuning Radio PS Call management Always-on by a UE in CELL_PCH state (ie for a maximum duration of PCHTimerT2) for the N.A. Integer 1 65535 10 26673 URA_PCH UA5.0
RNC to trigger a
state change of this UE to URA_PCH
Number of frames the de-compressor should discard before declaring the error
Robust Header Compression (ROHC - RFC
nbOfDiscardedFrameInSnLsbWrapAroundDetection RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC recovery from SN Lsb wrap-around has been successful. (Mode: U-O-R; Profile frames Integer 0 5 10 22845 LR Future
3095/4815)
>= 1)
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
nbOfIterationsForQosDegradationCheck PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] Number of iterations to be considered in QoS evolution checking Integer 2 10 1 2 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
This parameter defines the number of Notification Indicator (NI) transmitted in a
<RNC>-<NodeB>-<FDDCell>-
nbOfNiPerMichFrame MbmsResourceClass2 2 RNC partial system_restricted Radio Broadcast Services MBMS MICH frame N.A. Enumerate 18 31868 MBMS Broadcast UA7.1
<MbmsResourceClass2>
Cf. 3GPP TS 25.433 § 9.2.2.21D
Number of times CP_IU repeats a reset to the core network if no acknowledge is
nbResetRepetitions CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none system_restricted Radio Protocols N.A. Integer 0 65535 5 0 none UA1
received.
Number of times CP_IU repeats a reset to the core network if no acknowledge is
nbResetRepetitions PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none system_restricted Radio Protocols N.A. Integer 0 65535 N.A. 0 none UA1
received.
This parameter indicates how often the transmitter should poll the receiver in
<RadioAccessService>-<RlcConfClass>- L2 improvements support (RLC & MAC-hs/e
nbrOfBytesBetweenPolling DlRlcAckFlexibleMode 3 RNC none system_restricted Radio HSDPA Flexible MAC-ehs/RLC case of RLC flexible size (expressed in terms of bytes of payload sent to the bytes Integer 1 100000 10000 34388 UA7.0
<DlRlcAckFlexibleMode> S/W for improved RLC)
receiver)
TS 25.331 Poll_PU
OPTIONAL
<RadioAccessService>-<RlcConfClass>- L2 improvements support (RLC & MAC-hs/e
nbrOfPuBetweenPolling DlRlcAckFlexibleMode 3 RNC none system_restricted Radio Protocols Number of PDUs, interval between pollings 8 spare values needed.
N.A. Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> S/W for improved RLC)
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollPu PU.
TS 25.331 Poll_PU
OPTIONAL
<RadioAccessService>-<RlcConfClass>-
nbrOfPuBetweenPolling DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] Number of PDUs, interval between pollings 8 spare values needed.
N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode>
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollPu PU.
TS 25.331 Poll_PU
OPTIONAL
<RadioAccessService>-<RlcConfClass>-
nbrOfPuBetweenPolling UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation Number of PDUs, interval between pollings 8 spare values needed.
N.A. Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode>
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollPu PU.
TS 25.331 Poll_PU
OPTIONAL
<RadioAccessService>-<RlcConfClass>-
nbrOfPuBetweenPolling UlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][UL] Number of PDUs, interval between pollings 8 spare values needed.
N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode>
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollPu PU.
TS 25.331 Poll_SDU
OPTIONAL
<RadioAccessService>-<RlcConfClass>- L2 improvements support (RLC & MAC-hs/e
nbrOfSduBetweenPolling DlRlcAckFlexibleMode 3 RNC none system_restricted Radio Protocols Number of SDUs, interval between pollings.
N.A. Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> S/W for improved RLC)
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollSdu SDU
TS 25.331 Poll_SDU
OPTIONAL
<RadioAccessService>-<RlcConfClass>-
nbrOfSduBetweenPolling DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] Number of SDUs, interval between pollings.
N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode>
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollSdu SDU
TS 25.331 Poll_SDU
OPTIONAL
<RadioAccessService>-<RlcConfClass>-
nbrOfSduBetweenPolling UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation Number of SDUs, interval between pollings.
N.A. Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode>
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollSdu SDU.
TS 25.331 Poll_SDU
OPTIONAL
<RadioAccessService>-<RlcConfClass>-
nbrOfSduBetweenPolling UlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][UL] Number of SDUs, interval between pollings.
N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode>
This parameter indicates how often the transmitter should poll the receiver in
case of polling every pollSdu SDU.
TS23.003
The Base Station Identity code (BSIC) is a local colour code that allows a MS to
ncc GSMCell 3 RNC <RNC>-<GSMNeighbour>-<GSMCell> none customer_setting Radio Design N.A. Integer 0 7 N.A. 0 none UA1
distinguish between different neighbouring base stations. BSIC is a 6 bit length
code which is structured in the following way:
BSIC = NCC (3 bits) + BCC (3 bits
This parameter defines of ratio between the number N of dynamic single/dual CQI
nCqiTypeAMCqiRatio HsdpaConf 3 BTS <BTSEquipment>-<BTSCell>-<HsdpaConf> none system_restricted Radio HSUPA MIMO reports out of a sequence of M CQI reports in case the UE is configured in MIMO N.A. Enumerate 40544 83984 2*2 MIMO UA8.1
mode.This parameter does not apply to alpha-CEM/iCEM.
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
nCr CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Maximum number of cell reselections. N.A. Integer 1 16 8 29816 UA5.0
<CellSelectionInfo>-<CrMgt> Structure (HCS)
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
nCr CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Maximum number of cell reselections. N.A. Integer 1 16 8 29816 UA5.0
<CellSelectionInfoConnectedMode>-<CrMgt> Structure (HCS)
Hold-off period before sending more negative feedback that was based on the
same trigger. When this timer expires, a number (BlindNegativeFeedbackCount) Robust Header Compression (ROHC - RFC
negativeFeedbackHoldOffPeriod RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC ms Integer 0 500 2 100 22845 LR Future
of negative feedbacks are sent again. Special value 0 means systematic sending 3095/4815)
of NACK on every UL pa
Identifier of the Interface Node. This attribute is used to perform the connection
neId INode 0 OAM <RNC>-<RNCEquipment>-<INode> critical system_restricted Radio Design N.A. String 0 N.A. 0 none UA1
between the IN and the OMC for state and alarm reporting
READ
neIdOfPartner BTSEquipment BTS <BTSEquipment> none customer_setting BTS Mode Selection Identifier of the partner NE Id for this NE when used in a dual node configuration N.A. String 0 25 N.A. 133975 Hosting of 2 NodeBs WCDMA in one d4U LR13.1
ONLY
<RNC>-<NodeB>-<FDDCell>- Compound Neighbour List Developments
neighbourCellPrio GsmNeighbouringCell 3 RNC none expert_tuning Radio Mobility The priority of the GSM neighbor cells N.A. Integer 0 31 N.A. 34274 UA6.0
<GsmNeighbouringCell> (IFREQ/IRAT)
<RNC>-<NodeB>-<FDDCell>- The priority of the LTE neighbor cells: NLTENeighbouring
External Document
neighbourCellPrio LteNeighbouringCell 3 RNC none expert_tuning Radio Mobility LTE Page 42 N.A. Integer 0 N.A. 100894 UMTS to LTE Handover LR14.2 Alcatel-Lucent
<LteNeighbouringCell> 0 is the highest priority, NLTENeighbouringPerFDDCell-1 the lowest PerFDDCell-1
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
TS 25.214 N_OUTSYNC_IND
This parameter defines the number of consecutive out-of-sync indications after
<RNC>-<NodeB>-<FDDCell>- which the timer T_RLFAILURE shall be started.
nOutSyncInd SynchronisationConfiguration 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation N.A. Integer 1 256 256 32898 UA06 Parameter Evolution UA6.0
<SynchronisationConfiguration>
The UL NBAP Synchronization Parameters (FddCell.nOutSyncInd &
FddCell.tRLFailure) are strongly couple
TS 25.214 N_OUTSYNC_IND
nOutSyncIndECellFach BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio Power Management FACH This parameter defines the number of consecutive out-of-sync indications after frames Integer 1 256 1 5 108103 Enhanced Cell Fach for DL and UL LR14.2
which the out-of-sync is detected.
<RNC>-<NodeB>-<FDDCell>-
Scheme1Cdma1xCellSelectionInf the limitation to change the occupied PN for CDMA to reset the number of ping-
nPn 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] N.A. Integer 1 10 3 33853 Support of WCDMA to CDMA Handover UA6.0
o pong HO
<Scheme1Cdma1xCellSelectionInfo>
RNC Connection to multiple Core Network
nriLength CsNriParams 3 RNC <RNC>-<CsFlexService>-<CsNriParams> none system_restricted Transport Iu Flex N.A. Integer 0 10 N.A. 29417 UA5.0
nodes (Iu-Flex)
RNC Connection to multiple Core Network
nriLength PsNriParams 3 RNC <RNC>-<PsFlexService>-<PsNriParams> none system_restricted Transport Iu Flex N.A. Integer 0 10 N.A. 29417 UA5.0
nodes (Iu-Flex)
Number of times a RAN procedure is retried (after first attempt) before giving up CS fallback enhancement from LTE to
nRimRetries RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility LTE N.A. Integer 0 255 12 115109 UA8.1
(in case of no answer is received) UMTS:enhanced Redirection
This parameter defines, in the NRI mapping table supported by the RNC in
nriRangeBegin CsNriSplit 3 RNC <RNC>-<MocnParams>-<CsNriSplit> none customer_setting Radio Design MOCN N.A. Integer 0 1023 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, the first NRI value of the range
This parameter defines, in the NRI mapping table supported by the RNC in
nriRangeBegin PsNriSplit 3 RNC <RNC>-<MocnParams>-<PsNriSplit> none customer_setting Radio Design MOCN N.A. Integer 0 1023 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, the first NRI value of the range
This parameter defines, in the NRI mapping table supported by the RNC in
nriRangeEnd CsNriSplit 3 RNC <RNC>-<MocnParams>-<CsNriSplit> none customer_setting Radio Design MOCN N.A. Integer 0 1023 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, the last NRI value of the range
This parameter defines, in the NRI mapping table supported by the RNC in
nriRangeEnd PsNriSplit 3 RNC <RNC>-<MocnParams>-<PsNriSplit> none customer_setting Radio Design MOCN N.A. Integer 0 1023 N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, the last NRI value of the range
The number of times a PAGING_TYPE_1 message is REPEATED;
nrOfPagingRepetitions PCH 3 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> none expert_tuning Radio Accessibility Paging N.A. Integer 0 6 3 24075 Paging repetition enhancements UA5.0
Note this has changed from UA04.2 where it was static and configuring the
number of times a PAGING_TYPE_1 message was sent.
TS 25.433 Pich Mode
nrPagingIndPerFrame PCH 3 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> none system_restricted Radio Accessibility Paging N.A. Enumerate piPerFrame18 20649 Online modification of UTRAN parameters UA3.0
The number of paging indicators (PIs) in a PICH frame.
RNC Connection to multiple Core Network
nullNriValue CsNriParams 3 RNC <RNC>-<CsFlexService>-<CsNriParams> none system_restricted Transport Iu Flex N.A. Integer 0 1023 N.A. 29417 UA5.0
nodes (Iu-Flex)
RNC Connection to multiple Core Network
nullNriValue PsNriParams 3 RNC <RNC>-<PsFlexService>-<PsNriParams> none system_restricted Transport Iu Flex N.A. Integer 0 1023 N.A. 29417 UA5.0
nodes (Iu-Flex)
<RadioAccessService>-<DedicatedConf>-
This parameter defines the actual number of common E-DCH resources that is
numberOfCommonEdchResources CommonEdchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH N.A. Integer 1 32 1 4 108103 Enhanced Cell Fach for DL and UL LR14.2
configured in a given cell. NBAP & SIB5.
<CommonEdchInfo>
The number of common H-RNTI available for Enhanced CELL_FACH and
<RadioAccessService>-<DedicatedConf>- broadcast through the BCCH channel
numberOfCommonHrnti HsdpaCommonSysInfo 3 RNC none system_restricted Radio HSDPA FACH N.A. Integer 1 4 4 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<HsdpaCellClass>-<HsdpaCommonSysInfo> Integer (1..4)
MAX_NB_COMMON_HRNTI=4 168710
<RadioAccessService>-<DedicatedConf>-
numberOfHsPdschCodes HsdpaCellClass 0 RNC none customer_tuning Radio HSDPA Codes Number of HsPdsch Codes for the Cells using this class. N.A. Integer 1 15 5 27932 HSDPA Step1 UA4.2
<HsdpaCellClass>
<RadioAccessService>-<DedicatedConf>-
numberOfHsScchCodes HsdpaCellClass 0 RNC none customer_tuning Radio HSDPA Codes Number of HsScch Codes for the Cells using this Class. N.A. Mixed 1 4 2 27932 HSDPA Step1 UA4.2
<HsdpaCellClass>
<RadioAccessService>-<DedicatedConf>-
numberOfPcchTransmissions HsdpaPagingSysInfo 3 RNC none customer_tuning Radio Accessibility Paging Number of paging transmission N.A. Integer 1 5 1 120428 Enhanced PCH support for Qchat LR Future
<HsdpaCellClass>-<HsdpaPagingSysInfo>
<RadioAccessService>-<ServiceInit>- KPI - Quick repeat of RRC Connection Setup
numberOfQuickRepeat CallAccessPerformanceConf 3 RNC none expert_tuning Radio Accessibility RRC Quick Repeat Maximum number of repetitions sent by the cNode to the iNodeRLC N.A. Integer 0 5 3 Q00833055 UA4.1
<CallAccessPerformanceConf> message
Maximum number of Schedule messages that can be sent during a single DRX
numberOfScheduleMessagesAllowedPerDrxPeriod CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> none system_restricted Radio Broadcast Services CBS scheduling period. Actual number sent is at discretion of RNC, but Maximum will N.A. Integer 1 3 11 75068 CBS improvement on dynamic scheduling LR Future
not be exceeded.
Number of Service Groups defined on this RNC. During the Set operation, it is not
numberOfServiceGroups RNC 3 RNC <RNC> none system_restricted Radio Design N.A. Integer 1 53 2 28016 3GPP compliant NBAP (multi-vendor) UA5.0
permitted to decrease the value of numberOfServiceGroups
numberOfUsers Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS Number of users to simulate for voice or data users Integer 1 1024 10 34195 Support OCNS with HSDPA UA6.0
<RadioAccessService>-<DedicatedConf>- The number of HS-PDSCH codes (SF16) that are reallocated will be computed
numCodesForDchAfterReallocation HsPdschDynamicManagement 3 RNC <HsdpaCellClass>- none expert_tuning Radio HSDPA Codes so that after reallocation, the numberof SFX free for DCH is targeted to this N.A. Integer 1 255 2 29800 Dynamic DL Code Tree Mgt For HSDPA UA5.0
<HsPdschDynamicManagement> parameter.
<RadioAccessService>-<DedicatedConf>-
The number of HS-PDSCH codes (SF16) that are stolen will be computed so that
numCodesForDchAfterStealing HsPdschDynamicManagement 3 RNC <HsdpaCellClass>- none expert_tuning Radio HSDPA Codes N.A. Integer 1 255 2 29800 Dynamic DL Code Tree Mgt For HSDPA UA5.0
after stealing, the number of SFX free for DCH is targeted to this parameter.
<HsPdschDynamicManagement>
This parameter is defines the number of cumulative 15 minute counter collection
intervals that are used before the Silent IU Detection feature evaluates the
numDetectionIntervals SilentIuDetection 3 RNC <RadioAccessService>-<SilentIuDetection> none system_restricted Radio Protocols Silent Iu N.A. Integer 1 10 2 80029 Silent Iu Detection UA5.0
success ratio of calls completed to calls attempted.
The default of 2 intervals implies the last
numMacdPdu OcnsHsdpa 2 RNC <RNC>-<NodeB>-<FDDCell>-<OcnsHsdpa> partial expert_tuning Radio Power Management OCNS Number of MAC-d PDUs in the priority queue per TTI N.A. Integer 0 100 8 34195 Support OCNS with HSDPA UA6.0
The minimal number of inter-frequency neighbor cells of the primary cell to be Compound Neighbour List Developments
numOfPrimaryCellNeighbourInterFreq FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility N.A. Integer 0 32 0 34274 UA6.0
definitely included in the compound neighbor list. (IFREQ/IRAT)
The minimal number of inter-frequency neighbor cells of the primary cell to be Compound Neighbour List Developments
numOfPrimaryCellNeighbourInterFreq NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none expert_tuning Radio Mobility N.A. Integer 0 32 0 34274 UA6.0
definitely included in the compound neighbor list. (IFREQ/IRAT)
The minimal number of 2G inter-RAT neighbor cells of the primary cell to be Compound Neighbour List Developments
numOfPrimaryCellNeighbourInterRat FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility N.A. Integer 0 32 0 34274 UA6.0
definitely included in the compound neighbor list. (IFREQ/IRAT)
The minimal number of 2G inter-RAT neighbor cells of the primary cell to be Compound Neighbour List Developments
numOfPrimaryCellNeighbourInterRat NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none expert_tuning Radio Mobility N.A. Integer 0 32 0 34274 UA6.0
definitely included in the compound neighbor list. (IFREQ/IRAT)
The minimal number of intra-frequency neighbor cells of the primary cell to be Compounding Neighbor list developments
numOfPrimaryCellNeighbourIntraFreq FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility cells Integer 0 32 10 33693 UA6.0
definitely included in the compound neighbor list. (Intra-Frequency)
Compound Neighbour List Developments
numOfPrimaryCellNeighbourIntraFreq NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none expert_tuning Radio Mobility N.A. Integer 0 32 0 34274 UA6.0
(IFREQ/IRAT)
The minimal number of LTE neighbor cells of the primary cell to be included in the NumOfPrimaryCell
numOfPrimaryCellNeighbourLte FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility LTE N.A. Integer 0 0 100894 UMTS to LTE Handover LR14.2
compound LTE neighbor list. NeighbourLte
The minimal number of LTE neighbor cells of the primary cell on DRNC to be NumOfPrimaryCell
numOfPrimaryCellNeighbourLte NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none expert_tuning Radio Mobility LTE N.A. Integer 0 0 100894 UMTS to LTE Handover LR14.2
included in the compound LTE neighbor list. NeighbourLte
<RadioAccessService>-<DedicatedConf>- This parameter defines the number of PS users that will be downgraded
numUsersDowngrade IrmPreemptionCacParams 3 RNC none expert_tuning Radio Load Management congestion control Integer 0 15 1 34228 RRM developments UA6.0
<CacConfClass>-<IrmPreemptionCacParams> (preempted) in case of air interface congestion
The parameter defines the observation time interval used to monitor the number
observationIntervalforRrcRegistrationMessages RRCFiltering 3 RNC <RadioAccessService>-<RRCFiltering> none expert_tuning Radio Accessibility RRC Reject s Integer 1 1800 1 300 98610 RRC Connection Attempts Filtering LR14.2
of received RRC CONNECTION REQUEST (Registration) messages per cell.
The parameter defines the observation time interval used to monitor the number
observationIntervalforRrcRegistrationMessages RRCFiltering 3 RNC <RadioAccessService>-<RRCFiltering> none expert_tuning Radio Accessibility RRC Reject s Integer 1 1800 1 300 98610 RRC Connection Attempts Filtering LR14.2
of received RRC CONNECTION REQUEST (Registration) messages per cell.
OCNSActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management OCNS This parameter allows to activate/deactivate OCNS. N.A. Boolean FAUX 13497 Orthogonal Channel Noise simulation UA3.0
<RNC>-<NodeB>-<FDDCell>-
OCNSChannelizationCodeNumber OCNSChannelsParameters 3 RNC none customer_tuning Radio Power Management OCNS This parameter defines the downlink channelization code number. N.A. Integer 0 511 7 13497 Orthogonal Channel Noise simulation UA3.0
<OCNSChannelsParameters>
<RNC>-<NodeB>-<FDDCell>-
OCNSPower OCNSChannelsParameters 3 RNC none customer_tuning Radio Power Management OCNS This parameter defines the percentage of the traffic power. % Integer 0 100 100 13497 Orthogonal Channel Noise simulation UA3.0
<OCNSChannelsParameters>
<RNC>-<NodeB>-<FDDCell>-
ocnsSpreadingFactor OCNSChannelsParameters 3 RNC none expert_tuning Radio Power Management OCNS This parameter clarifies the spreading factor used. N.A. Enumerate spreadingFactor8 13497 Orthogonal Channel Noise simulation UA3.0
<OCNSChannelsParameters>
<RNC>-<NodeB>-<FDDCell>-
Scheme1Cdma1xCellSelectionInf
ocupTimes 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] Maximum number of ping-pongs N.A. Integer 0 10 6 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme1Cdma1xCellSelectionInfo>
<RNC>-<CsCoreNetworkAccess>-
It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
okToCriticalStep CSSendingRanapOverloadControl 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP N.A. Integer 0 16 12 33804 Manual Overload Control UA5.0
message from RNC to CN when the RNC overload level goes from OK to Critical.
<CSSendingRanapOverloadControl>
<RNC>-<PsCoreNetworkAccess>-
It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
okToCriticalStep PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP N.A. Integer 0 16 12 33804 Manual Overload Control UA5.0
message from RNC to CN when the RNC overload level goes from OK to Critical.
<PSSendingRanapOverloadControl>
<RNC>-<CsCoreNetworkAccess>-
It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
okToMajorStep CSSendingRanapOverloadControl 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP N.A. Integer 0 16 6 33804 Manual Overload Control UA5.0
message from RNC to CN when the RNC overload level goes from OK to Major.
<CSSendingRanapOverloadControl>
<RNC>-<PsCoreNetworkAccess>-
It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
okToMajorStep PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP N.A. Integer 0 16 6 33804 Manual Overload Control UA5.0
message from RNC to CN when the RNC overload level goes from OK to Major.
<PSSendingRanapOverloadControl>
<RNC>-<CsCoreNetworkAccess>-
It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
okToMinorStep CSSendingRanapOverloadControl 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP N.A. Integer 0 16 3 33804 Manual Overload Control UA5.0
message from RNC to CN when the RNC overload level goes from OK to Minor.
<CSSendingRanapOverloadControl>
<RNC>-<PsCoreNetworkAccess>-
It is the step sent in the “Number of Step” IE of RANAP OVERLOAD CONTROL
okToMinorStep PSSendingRanapOverloadControl 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP N.A. Integer 0 16 3 33804 Manual Overload Control UA5.0
message from RNC to CN when the RNC overload level goes from OK to Minor.
<PSSendingRanapOverloadControl>
This parameter allows the RNC to determine whether the new OLPC algorithm is
<RadioAccessService>-<DedicatedConf>- used or not. The new OLPC algorithm is to use the initial/max/minSirTarget of the Multi-Service RAB call drop reduction
olpcNewAlgoAllowed UlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB Boolean true 123648 LR Future
<PowerConfClass>-<UlUsPowerConf> primary cell enhancement
Setting the parameter to false allows roll back to the old OLPC Algorithm.
<RadioAccessService>-<SoftCongestion>-
<SoftCongestionFrequency>-
ols SoftCongestionHspaService 3 RNC none customer_setting Radio Load Management Soft Congestion This attribute provides the RNC Olympic Level of Service (OLS) N.A. Enumerate N.A. 119026 Soft Congestion UA8.1
<SoftCongestionServiceInfo>-
<SoftCongestionHspaService>
This attribute provides the RNC Olympic Level of Service (OLS) associated to a
given TrafficClassBasedQoS,/ARPBasedQoS/THPBasedQoS instances
combination.
<RadioAccessService>-<TrafficClassBasedQos>- QoS differentiation based on TC, ARP and
ols ThpBasedQos 3 RNC none customer_tuning Radio PS Call management QoS Differentiation
N.A. Enumerate N.A. 25080 UA5.0
<ArpBasedQos>-<ThpBasedQos> THP
0 -> OLS = Gold
1 -> OLS = Silver
2 -> OLS = Bronze
Each entry of the list represents an OMC-B that can manage the BTS. It is
composed of omcbIpV4Address: IP V4 address of the OMC-B.
IPv6 Support for OAM Traffic on the NodeB
omcbIpV4Address OMCBConnection 3 BTS <BTSEquipment>-<OMCBConnection> none customer_init Transport IP This parameter is used only is DHCP has not been activated on the BTS (I&C N.A. IP4Address N.A. 108956 LR Future
(OneBTS)
parameter).
In case the OMC-B address stored in I
Each entry of the list represents an OMC-B that can manage the BTS. It is
composed of omcbIpV6Address: IP V6 address of the OMC-B.
IPv6 Support for OAM Traffic on the NodeB
omcbIpV6Address OMCBConnection 3 BTS <BTSEquipment>-<OMCBConnection> none customer_init Transport IP This parameter is used only is DHCP has not been activated on the BTS (I&C N.A. IP6Address N.A. 108956 LR Future
(OneBTS)
parameter).
In case the OMC-B address stored in I
omcbTcpPort: TCP port of the OMC-B
omcbTcpPort OMCBConnection 3 BTS <BTSEquipment>-<OMCBConnection> none system_restricted Radio Design This parameter is used only is DHCP has not been activated on the BTS (I&C N.A. Integer 0 65535 N.A. 24036 Geographic disaster recovery enhancements UA4.2
parameter).
This parameter reports the CpriTrail resource operability, as per ITU-T X.731.
READ The possible values are: BBU Clustering: lightRADIO Fronthaul
operationalState CpriTrail BTS <BTSEquipment>-<LFOSubCluster>-<CpriTrail> partial customer_tuning BTS CEM Management N.A. Enumerate enabled 159946 LR Future
ONLY - disabled: the resource is not able to perform functions; Optimizer Support in WCDMA (x/eCCM-u)
- enabled : the resource is operational.
This parameter reports the LFO resource operability, as per ITU-T X.731. The
READ possible values are: BBU Clustering: lightRADIO Fronthaul
operationalState LFO BTS <BTSEquipment>-<LFOSubCluster>-<LFO> partial customer_tuning BTS CEM Management N.A. Enumerate enabled 159946 LR Future
ONLY - disabled: the resource is not able to perform functions; Optimizer Support in WCDMA (x/eCCM-u)
- enabled : the resource is operational.
Enables device type detection sub feature (i.e., PC card, Tablet, Smartphone) of
operatorDeterminesDeviceTypeFlag EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control the Smart EDCH resource usage feature for TTI selection. N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if smartEdchResourceUsageActivation is True
This parameter is the BTS A2EA (AAL Type 2 Service Endpoint Address). The
format of this A2EA is the NSAP address format (NSAP: Network Service Access
originatingA2ea Qaal2Params 3 BTS <BTSEquipment>-<Qaal2Params> none customer_setting Transport ATM ALCAP Point)
N.A. HexString 40 40 N.A. 28018 3GPP compliant Iub: Alcap UA6.0
Default value: <All bytes set to 0>
iMCTA applies to the originating cell if its relevant cell colors are upper (worse) or
<RadioAccessService>-<Imcta>-
OriginatingCellColourThresholdPe equal than this threshold (a threshold per iMCTA service). For example, if the intelligent Multi-Carrier Traffic Allocation
originatingCellColourThreshold 3 RNC <OriginatingCellColourThresholdConfClass>- none expert_tuning Radio Mobility [HHO][iMCTA] N.A. Enumerate N.A. 29415 UA5.0
rService threshold is yellow, the iMCTA applies if all relevant originating cell colors are (iMCTA)
<OriginatingCellColourThresholdPerService>
yellow
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- This parameter is a pointer to one of the five RNC iMCTA
originatingCellColourThresholdConfClassRef 3 RNC none customer_init Radio Mobility [HHO][iMCTA] N.A. ServiceLink N.A. 34437 Enhanced iMCTA UA7.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> OriginatingCellColourThresholdConfClass instances
This parameter defines the timer for Out of sequence SDU Delivery (OSD) in the
osdTimer MbmsMcchClass 0 RNC none system_restricted Radio Broadcast Services MBMS UE (RLC-UM) used for MCCH traffic reception ms Enumerate 5120 31868 MBMS Broadcast UA7.1
Refer to 3GPP TS 25.331 § 10.3.4.27 and TS 25.322
This parameter defines the window size for Out of sequence SDU Delivery (OSD)
in the UE (RLC-UM) used for MCCH traffic reception.
osdWindowSize MbmsMcchClass 0 RNC none system_restricted Radio Broadcast Services MBMS N.A. Enumerate 64 31868 MBMS Broadcast UA7.1
The window size is expressed in number of RLC-UM PDUs
Refer to 3GPP TS 25.331 § 10.3.4.27 and TS 25.322
<RadioAccessService>-<DedicatedConf>-
otherSystemMeasQuantityUsed MeasurementCdma1xConfClass 3 RNC none expert_tuning Radio Mobility [HHO][CDMA] N.A. Enumerate N.A. 33853 Support of WCDMA to CDMA Handover UA4.1K
<MeasurementCdma1xConfClass>
An RNC outage shorter than the value given by this parameter will not be taken
outageGranularity RNC 3 RNC <RNC> none system_restricted Radio Design s Integer 1 3600 30 20424 Enhanced Alarm Management UA3.1
into account in the total outage sum.
outOfOrderSduDeliveryEnable UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Unused not used enable/disable Out Of Order SDU Delivery feature N.A. Boolean FAUX 28042 Throughput KPI improvement LR Future
outOfOrderSduSize RlcPerformanceConf 3 RNC <RadioAccessService>-<RlcPerformanceConf> none system_restricted Radio Unused not used The size of the SDU that will trigger out of order delivery N.A. Integer 0 255 100 28042 Throughput KPI improvement LR Future
Difference between the power measured on one carrier by the cell and the power
<RadioAccessService>-<DedicatedConf>-
overEstimate PowerConfClass 3 RNC none system_restricted Radio Power Management BTS Self tuning allocated at RNC level, under which power consumption is considered as dB Float -35 15 0,1 1 0 none UA6.0
<PowerConfClass>
overestimated.
This parameter applies in case of Automatic Carrier Switch-off (ACS) involving
<RadioAccessService>-<DedicatedConf>-
three cells (one base and two overlay cells).
overlayCellLoadThresholdForFirstSwitchOff AutoSwitchOffConfExtension 3 RNC <AutoSwitchOffConfClass>- none customer_setting Radio Power Management SwitchOff N.A. Integer 0 9999 1 15 118254 Automatic Carrier Switch-off Evolution LR Future
When base cell and two overlay cells are monitored, the candidate overlay cell
<AutoSwitchOffConfExtension>
for switch-off shall have its Radio Link load lowe
<RadioAccessService>-<DedicatedConf>- One of two radio link load threshold governing automatic carrier switch off. The
overlayCellLoadThresholdForSwitchOff AutoSwitchOffConfClass 3 RNC none expert_tuning Radio Power Management SwitchOff N.A. Integer 0 9999 10 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> actual RL load of the overlay cell must pass below this threshold for switch Off.
This parameter applies in case of Automatic Carrier Switch-off (ACS) involving
<RadioAccessService>-<DedicatedConf>-
three cells (one base and two overlay cells).
overlayCellPowerThresholdForFirstSwitchOff AutoSwitchOffConfExtension 3 RNC <AutoSwitchOffConfClass>- none customer_setting Radio Power Management SwitchOff % Integer 0 100 1 30 118254 Automatic Carrier Switch-off Evolution LR Future
When base cell and two overlay cells are monitored, the candidate overlay cell
<AutoSwitchOffConfExtension>
for switch-off shall have its Power load lower tha
One of two power threshold governing automatic carrier switch off. It is given in
<RadioAccessService>-<DedicatedConf>-
overlayCellPowerThresholdForSwitchOff AutoSwitchOffConfClass 3 RNC none expert_tuning Radio Power Management SwitchOff percentage of the max cell transmit power of the base cell. The actual transmit N.A. Integer 0 100 25 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass>
power of the overlay cell must pass below this threshold for switch Off.
If this parameter is set to TRUE, this cell should be switched-off by RNC before
overlayCellToBeSwitchedOffFirst FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management SwitchOff the other overlay cell referencing the same base cell when low traffic conditions N.A. Boolean false 118254 Automatic Carrier Switch-off Evolution LR Future
are met. For switch-on, this cell will be setup after the other overlay cell.
This attribute gives the threshold level at which a call is considered as priority for
Overload protection of NodeB digital part
overloadCallPriorityThreshold BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio Configuration the overload protection scheme. If this attribute is set to 0, no priority values are N.A. Integer 0 15 1 0 125407 LR13.1
(controller and modem Step2)
considered as a priority. If the attribute is non-zero, priorities set to this val
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>- resulting HSDPA throughput for a 16 QAM capable UE according to the number
ovsfCodesThroughput16QamUe 3 RNC none expert_tuning Radio HSDPA Resource Sharing Kbits/s Integer 0 14400 (300,0,0,0,0,0,0,0,0,0,0,0,0,0,0) 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
lass <HsxpaR99ResourcesSharingCellClass> of SF16 OVSF codes
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>- The parameter defines proportionality factor taken into account for calls
ovsfCodesThroughputMimoFactor 3 RNC none system_restricted Radio HSDPA Codes N.A. Float 0 1 0,01 1 83984 2*2 MIMO UA8.1
lass <HsxpaR99ResourcesSharingCellClass> configured with MIMO for calculation of codes to be reserved with fair sharing.
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>- resulting HSDPA throughput for a QPSK only UE according to the number of
ovsfCodesThroughputQpskUe 3 RNC none expert_tuning Radio HSDPA Resource Sharing Kbits/s Integer 0 14400 (200,0,0,0,0,0,0,0,0,0,0,0,0,0,0) 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
lass <HsxpaR99ResourcesSharingCellClass> SF16 OVSF codes
<RadioAccessService>-<DedicatedConf>-
ownSystemMeasQuantityUsed MeasurementCdma1xConfClass 3 RNC none expert_tuning Radio Mobility [HHO][CDMA] N.A. Enumerate N.A. 33853 Support of WCDMA to CDMA Handover UA4.1K
<MeasurementCdma1xConfClass>
<RadioAccessService>-<OverloadInfo>-
pagingRejectRate Overload 3 RNC none system_restricted Radio Load Management Overload Control N.A. Integer 0 2147483647 2 33804 Manual Overload Control UA5.0
<RNCNodeOverloadControl>-<Overload>
This parameter allows to differentiate the number of paging repetitions per paging
pagingRepetitionDomain RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Accessibility Paging N.A. Enumerate AllPagingCauses 125177 Paging repetition per domain UA07.1.3
cause.
This parameter defines in % the PA overbooking ratio. It shall be configured such
<RadioAccessService>-<DedicatedConf>-
paOverbookingRatio HsdpaCellClass 3 RNC none expert_tuning Radio HSDPA Power Management that the following holds: maxTxPower1 + maxTxPower2 = % Integer 1 100 1 29808 Multi-carrier PA Power Pooling UA6.0
<HsdpaCellClass>
(1+PaOverbookingRatio)*PA Power
paPoolingActivation BTSEquipment 0 BTS <BTSEquipment> critical customer_init Radio HSDPA Power Management N.A. Boolean FAUX 29808 Multi-carrier PA Power Pooling UA6.0
paPoolingDCActivation BTSEquipment 0 BTS <BTSEquipment> critical system_restricted Radio HSDPA Power Management This parameter allows to activate PA Power Pooling in dual cell configuration N.A. Boolean false 111362 Dynamic PA Power Pooling LR Future
Maximum Power that is allowed to be used for the MCPA managed by the BTS.
paPowerCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_init BTS Capacity Licensing W Mixed 0 65534 infinite 16746 Capacity licensing UA6.0
Value 65535 means unlimited capacity
Percentage of PA power associated with this BTS cell. The maximum power
declared for each BTS Cell to the RNC will be :
paRatio BTSCell 3 BTS <BTSEquipment>-<BTSCell> critical customer_setting Radio Design % Integer 10 100 50 34667 Parameter Class Evolution in UA07 UA7.0
Max DL power capability = (PaRatio /100 * PA Max power capability) + Tx
losses. This max power will be shared between all BTS cells wi
paResourceIdList BTSCell 0 BTS <BTSEquipment>-<BTSCell> critical system_restricted BTS Configuration Instance of the PaResource associated to the BTSCell. N.A. ServiceLink N.A. 83984 2*2 MIMO UA8.1
If partial fill is used, this parameter gives the number of user octet per AAL1
cell.
Setting this parameter to 0 disables partial cell fill, and causes all cells to be
partialFill RouteCes 0 BTS <BTSEquipment>-<RouteCes> critical expert_tuning Transport ATM completely filled before they are sent.
N.A. Integer 0 47 0 25069 CES support in Node-B/iCCM LR Future
(0) NO_PARTIAL_FILL
Note1: a significant
This parameter is used to activate the switch off on candidateForSwitchOff
paSwitchOffActivationOnAcFailure BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio Power Management SwitchOff N.A. Boolean FAUX 34396 Automatic Carrier Switchoff UA7.1
MCPAs in case of AC mains failure detection (BTS level).
The identifier of the AAL type 2 path.
pathId AAL2Bearer 0 BTS <BTSEquipment>-<AAL2Bearer> none customer_setting Transport ATM N.A. Integer 1 2147483647 N.A. 13464 Multiple PCM Iub connection without IMA UA2.0
AAL type 2 Path: An ATM VCC between two AAL type 2 nodes.
This attribute specifies the path Maximum Transmission Unit (MTU) size to be
pathMtu SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none system_restricted Transport IP used for the SCTP association between the RNC and the peer. The value of this bytes Integer 512 9180 1 1500 27649 Native IP Iub support UA7.1
attribute includes the IP header size (20 bytes for IPV4).
This parameter defines the p-bit value (level 2 QoS) to be used by the Node B for
ARP traffic for which it is not possible to rely on DSCP value (since ARP is not
pBitForArp IpRan 3 BTS <BTSEquipment>-<IpRan> none expert_tuning Transport IP N.A. Integer 0 7 10 79362 Flexible Operator Configurable Split IP Iub UA8.1
transported on IP). This parameter does not exist in case of Non-Vlan
architecture.
This parameter defines the p-bit value (level 2 QoS) to be used by the Node B for
pBitForNonIpTrafficExceptArp IpRan 3 BTS <BTSEquipment>-<IpRan> none expert_tuning Transport IP all UL non-IP traffic except ARP for which it is not possible to rely on DSCP value. N.A. Integer 0 7 17 79362 Flexible Operator Configurable Split IP Iub UA8.1
This parameter does not exist in case of Non-Vlan architecture.
This parameter enables to activate the Layer 2 p-bit marking in Node B.True:
pBitMarkingActivation IpRan 3 BTS <BTSEquipment>-<IpRan> none customer_tuning Transport IP Enables L2 p-bit markingFalse: Disables L2 p-bit marking. N.A. Boolean FAUX 75784 Ethernet QoS handling in UTRAN UA7.1
This parameter applies both for Native IP Iub and Hybrid IP Iub cases.
The DL Power IE indicates a power level relative to the [FDD - primary CPICH
power] [TDD - primary CCPCH
<RadioAccessService>-<DedicatedConf>-
pcchHspdschPower HsdpaPagingSysInfo 3 RNC none customer_setting Radio Accessibility Paging power] configured in a cell. If Transmit Diversity is applied to a downlink physical N.A. Float -35 15 0,1 -12 120428 Enhanced PCH support for Qchat LR Future
<HsdpaCellClass>-<HsdpaPagingSysInfo>
channel, the DL Power IE indicates
the power offset between the l
The DL Power IE indicates a power level relative to the [FDD - primary CPICH
power] [TDD - primary CCPCH
<RadioAccessService>-<DedicatedConf>-
pcchHsscchPower HsdpaPagingSysInfo 3 RNC none customer_setting Radio Accessibility Paging power] configured in a cell. If Transmit Diversity is applied to a downlink physical N.A. Float -35 15 0,1 -12 120428 Enhanced PCH support for Qchat LR Future
<HsdpaCellClass>-<HsdpaPagingSysInfo>
channel, the DL Power IE indicates
the power offset between the l
pccpchSttdIndicator FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial system_restricted Radio Protocols Indicate if the Space Time Transmit Diversity is activated on Primary CCPCH N.A. Enumerate inactive 28016 3GPP compliant NBAP (multi-vendor) UA5.0
Feature Activation Flag. Defines if the 77736 feature is activated. True means
pCellActivationAllowed LocationServices 3 RNC <RNC>-<LocationServices> none customer_setting Radio Location Services N.A. Boolean FAUX 77736 Non-GPS LBS (SKT) UA7.0
activated
<RNC>-<LocationServices>- Domain Activation Flag. Defines if the 77736 feature is activated upon Non-
pCellParamsEnabled CommercialLocationServices 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 77736 Non-GPS LBS (SKT) UA7.0
<CommercialLocationServices> Emergency LBS request. True means activated
<RNC>-<LocationServices>- Domain Activation Flag. Defines if the 77736 feature is activated upon Emergency
pCellParamsEnabled EmergencyLocationService 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 77736 Non-GPS LBS (SKT) UA7.0
<EmergencyLocationService> LBS request. True means activated
<RNC>-<LocationServices>- Max allowed delay for location fix using pCell method in Non-Emergency LCS
pCellParamsMaxResponseTime CommercialLocationServices 3 RNC none customer_setting Radio Location Services s Integer 1 60 5 77736 Non-GPS LBS (SKT) UA7.0
<CommercialLocationServices> request from Core-Network
<RNC>-<LocationServices>- Max allowed delay for location fix using pCell method in Emergency LCS request
pCellParamsMaxResponseTime EmergencyLocationService 3 RNC none customer_setting Radio Location Services s Integer 1 60 5 77736 Non-GPS LBS (SKT) UA7.0
<EmergencyLocationService> from Core-Network
<RNC>-<LocationServices>-
pCellParamsRrcMeasRptInterval CommercialLocationServices 3 RNC none system_restricted Radio Unused Changeable parameter for the RRC measurement reporting interval ms Enumerate 250 118928 SKT Non-GPS LBS enhancement Cancelled
<CommercialLocationServices>
This is the threshold (Bytes) of the GTPU Buffer occupancy that is monitored by
<RadioAccessService>-<AlwaysOnConf>- the RNC on the downlink for direct transition from URA_PCH or CELL_PCH to
pchDchDlGtpuBoThreshold AoOnPchParam 3 RNC none expert_tuning Radio PS Call management Always-on bytes Integer 0 32000 1 1024 159246 Direct PCH to DCH Transition Enhancements LR13.3
<AoOnPchParam> CELL_DCH. When the UE is in CELL_PCH or URA_PCH state with a single PS
I/B RAB case and the CN sends
<RadioAccessService>-<AlwaysOnConf>-
pchDchDlTimer AoOnPchParam 3 RNC none customer_tuning Radio PS Call management Always-on This parameter sets the minimum time between the emission of two reports. ms Integer 10 10000 10 1600 159246 Direct PCH to DCH Transition Enhancements LR13.3
<AoOnPchParam>
pchRrcStates RadioAccessService 3 RNC <RadioAccessService> none customer_init Radio PS Call management Always-on Definition of RRC states usage N.A. Enumerate none 26673 URA_PCH UA5.0
This parameter provides the physical cell identity as specified by TS 36.211,
pci LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none expert_tuning Radio Mobility LTE N.A. Integer 0 503 0 100894 UMTS to LTE Handover LR14.2
Chapter 6.11 Synchronization signals.
T3 backhaul for 9316 MS Node B and 9326
pcm3SupportEnabled BTSEquipment 0 BTS <BTSEquipment> critical customer_setting Transport ATM T3 Activation flag for the feature T3 support. N.A. Boolean FAUX 93278 LR Future
d2U
pcmId RouteCes 0 BTS <BTSEquipment>-<RouteCes> critical customer_setting Transport ATM Represents the Identifier of the outgoing PCM to reach a remote BTS. N.A. ServiceLink N.A. 25069 CES support in Node-B/iCCM LR Future
Represents a bit mask where each bit stands for a PCM TimeSlot number. A bit
is set to 1 if the corresponding TS is part of the CES Route, is set to 0 in other
pcmTimeSlotMask RouteCes 0 BTS <BTSEquipment>-<RouteCes> critical expert_tuning Transport ATM N.A. BitString 32 32 N.A. 25069 CES support in Node-B/iCCM LR Future
cases (TS not part of the group or unavailable).
The least significant bit (lsb) represents “T
This configurable parameter allows the operator to provision pcpich1 which is
UTRAN Self Optimisation (CPICH auto
pcpich1 FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> partial expert_tuning Radio Power Management [Common Channels] minimum value of pilot channel power for ensuring coverage of the Best sever dBm Float -10.0 50.0 0.1 35.0 123989 LR Future
adjustment)
area of this Cell. Used by 100508/123989 UTRAN Self Optimisation feature.
TS 25.433 Primary CPICH power
Power on the Primary Common Pilot Channel applied to the maxTxPower.
Parameter Class Evolution in UA08 & UTRAN
pcpichPower FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Power Management Common Channels CPICH Power is the power that shall be used for transmitting the CPICH in a dBm Float -10 50 0,1 35 80685 UA8.1
model simplification
cell.
For a fixed number of users, the higher the CPICH Power, the bigger the
This configurable parameter allows the operator to provision the Id of the
UTRAN Self Optimisation (CPICH auto
pcpichPowerAutoAdjConfClassId SonSession 3 RNC <RadioAccessService>-<SonSession> none customer_setting Radio Power Management [Common Channels] PcpichPowerAutoAdjustmentConfClass to be used by this FDDCell, by the N.A. ServiceLink N.A. 123989 LR Future
adjustment)
UTRAN Self Optimisation (cell overload).
pcpichTransmitDiversityIndicator FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial system_restricted Radio Protocols Indicate if the Transmit Diversity is activated on Primary CPICH N.A. Enumerate inactive 28016 3GPP compliant NBAP (multi-vendor) UA5.0
TS 25.331 PC Preamble
Number of power control preamble frames.
<RadioAccessService>-<DedicatedConf>- PC Preamble is absent in HANDOVER TO UTRAN COMMAND. Otherwise, it is
pcPreamble UlInnerLoopConf 3 RNC none expert_tuning Radio Power Management UL Inner Loop N.A. Integer 0 7 0 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<UlInnerLoopConf> present.
It precises the number of power control preamble slots which the UE must used
for the initial transmission of t
ATM Forum: af-tm-0056.000 April 1996 "Traffic Management Specification"
cells/se
peakCellRate VCC 3 BTS <BTSEquipment>-<VCC> none customer_tuning Transport ATM Integer 0 2147483647 N.A. 0 none UA1.0
It is included in Traffic Descriptor parameters. It is used to define the maximum c
Cell rate of the VC.
External Document Page 45 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Defines the Peak Information Rate (PIR) to be used by the NodeB for UL traffic
<BTSEquipment>-<IpRan>- on IP for the corresponding EthernetBandwidthPool. The PIR is expressed as a
peakInformationRate EthernetBandwidthPool 3 BTS critical expert_tuning Transport Ethernet % Integer 0 100 1 100 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> percentage of the (configured) UL bandwidth of either the Ethernet Port OR the
LAGroup where the Et
<RNC>-<NodeB>-<FDDCell>-
Cell reselection control in a Hierarchical Cell
penaltyTime GsmHcsTemporaryOffsets 3 RNC <GsmNeighbouringCell>- none customer_tuning Radio Mobility [Cell Selection] Time duration for which the “temporaryOffset” is applied for a neighbouring cell s Enumerate 20 29816 UA5.0
Structure (HCS)
<GsmHcsTemporaryOffsets>
<RNC>-<NodeB>-<FDDCell>-
GsmNeighbouringHcsTemporary <GsmNeighbouringCell>-
penaltyTime 3 RNC none customer_tuning Radio Mobility [Cell Selection] Time duration for which the “temporaryOffset” is applied for a neighbouring cell s Enumerate 20 33820 Broadcast of SIB12 UA6.0
Offsets <GsmCellSelectionInfoConnMode>-
<GsmNeighbouringHcsTemporaryOffsets>
<RNC>-<UmtsNeighbouring>-
UmtsNeighbouringHcsTemporary <UmtsNeighbouringRelation>- Cell reselection control in a Hierarchical Cell
penaltyTime 3 RNC none expert_tuning Radio Mobility [Cell Selection] Time duration for which the “temporaryOffset” is applied for a neighbouring cell s Enumerate 20 29816 UA5.0
Offsets <FddNeighCellSelectionInfoConnectedMode>- Structure (HCS)
<UmtsNeighbouringHcsTemporaryOffsets>
<RNC>-<UmtsNeighbouring>-
UmtsNeighbouringHcsTemporary Cell reselection control in a Hierarchical Cell
penaltyTime 3 RNC <UmtsNeighbouringRelation>- none expert_tuning Radio Mobility [Cell Selection] Time duration for which the “temporaryOffset” is applied for a neighbouring cell s Enumerate 20 29816 UA5.0
Offsets Structure (HCS)
<UmtsNeighbouringHcsTemporaryOffsets>
TS 25.331 Pending time after trigger
<RadioAccessService>-<AlwaysOnConf>- Ii indicates the period of time during which it is forbidden to send any new
pendTimeAfterTrig AoOnDchParam 3 RNC none system_restricted Radio PS Call management Always-on ms Enumerate pendingTimeAfterTrig2000 33565 UA06 Always-On developments UA6.0
<AoOnDchParam> measurement reports with the same Traffic volume event identity even if the
triggering condition is fulfilled. It is part of upsize algorith
TS 25.331 Pending time after trigger
<RadioAccessService>-<AlwaysOnConf>- Ii indicates the period of time during which it is forbidden to send any new Always On: User management with two-step
pendTimeAfterTrig AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on ms Enumerate pendingTimeAfterTrig2000 13473 UA2.0
<AoOnFachParam> measurement reports with the same Traffic volume event identity even if the downsizing
triggering condition is fulfilled. It is part of upsize algorith
<RadioAccessService>-<OverloadInfo>- It defines the percentage of TMUs which exceed Critical overload level when a
percentageTmuForCritical SendingRanapOverloadControl 3 RNC <RanapOverloadControl>- none system_restricted Radio Load Management RANAP RANAP Overload Control message is reported to CN with the step corresponding % Integer 0 100 100 33804 Manual Overload Control UA5.0
<SendingRanapOverloadControl> to the Critical overload.
<RadioAccessService>-<OverloadInfo>- It defines the percentage of TMUs which exceed Major load level when a RANAP
percentageTmuForMajor SendingRanapOverloadControl 3 RNC <RanapOverloadControl>- none system_restricted Radio Load Management RANAP Overload Control message is reported to CN with the step corresponding to the % Integer 0 100 100 33804 Manual Overload Control UA5.0
<SendingRanapOverloadControl> Major overload.
<RadioAccessService>-<OverloadInfo>- It defines the percentage of TMUs which exceed Minor overload level when a
percentageTmuForMinor SendingRanapOverloadControl 3 RNC <RanapOverloadControl>- none system_restricted Radio Load Management RANAP RANAP Overload Control message is reported to CN with the step corresponding % Integer 0 100 100 33804 Manual Overload Control UA5.0
<SendingRanapOverloadControl> to the Minor overload.
<RNC>-<NodeB>-<FDDCell>-
This parameter defines the time interval to send periodic DL SYNC frames on
periodicDlSyncInterval CchDlTimingAdjustmentParams 2 RNC <MbmsResourceClass2>- partial system_restricted Radio Synchronisation Iub Synchronisation s Integer 1 100 10 31868 MBMS Broadcast UA7.1
radio links
<CchDlTimingAdjustmentParams>
periodicDlSyncInterval DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation Defines the time interval to send periodic DL SYNC frames on radio links. s Integer 1 100 10 0 none UA2.1
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
periodicDlSyncInterval FACH 2 RNC partial system_restricted Radio Synchronisation Iub Synchronisation Defines the time interval to send periodic DL SYNC frames on radio links. s Integer 1 100 10 16717 RRC States Management UA3.0
<FACH>
periodicDlSyncInterval PCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Synchronisation Iub Synchronisation Defines the time interval to send periodic DL SYNC frames on radio links. s Integer 1 100 10 16717 RRC States Management UA3.0
Indicates whether periodic intra-frequency measurements reports are configured
periodicIntraFreqMeasEnabled Mme 3 RNC <RNC>-<Mme> none customer_setting Radio Call Trace N.A. Boolean FAUX 108192 RNC Full UE Tracing Capability UA8.1
for all UE.
Indicates the reporting period for intra-frequency measurements reports when it
periodicIntraFreqMeasReportingInterval Mme 3 RNC <RNC>-<Mme> none customer_setting Radio Call Trace s Enumerate 12 108192 RNC Full UE Tracing Capability UA8.1
is activated for all UE.
<RadioAccessService>-<DedicatedConf>-
it specifies Periodicity for Scheduling Info – grant for common E-DCH operation.
periodicityOfSchedInfoGrant CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH ms Enumerate 50 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
Periodicity of UL scheduling information when Grant_Available is TRUE and E-
<RadioAccessService>-<DedicatedConf>- DCH TTI selected is 10msec. This parameter is ignored by the RNC when RB is
periodicityOfSchedInfoGrant EdchCellClass 3 RNC none system_restricted Radio HSUPA Scheduler ms Enumerate 50 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass> mapped on to E-DCH non scheduled data mode.
In UA05, this parameter was defined as periodicityOfSchedIn
Periodicity of UL scheduling information when Grant_Available is TRUE and E-
<RadioAccessService>-<DedicatedConf>-
periodicityOfSchedInfoGrantEdchTti2ms EdchCellClass 3 RNC none system_restricted Radio HSUPA Scheduler DCH TTI selected is 2msec. This parameter is ignored by the RNC when RB is ms Enumerate 100 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass>
mapped on to E-DCH non-scheduled data mode.
it specifies Periodicity for Scheduling Info – no grant for common E-DCH
<RadioAccessService>-<DedicatedConf>-
operation.
periodicityOfSchedInfoNoGrant CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH ms Enumerate 50 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
Periodicity of UL scheduling information when Grant_Available is FALSE and E-
<RadioAccessService>-<DedicatedConf>- DCH TTI selected is 10msec. This parameter is ignored by the RNC when RB is
periodicityOfSchedInfoNoGrant EdchCellClass 3 RNC none system_restricted Radio HSUPA Scheduler ms Enumerate 100 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass> mapped on to E-DCH non scheduled data mode.
Comment In UA05, this parameter was defined as periodicity
Periodicity of UL scheduling information when Grant_Available is FALSE and E-
<RadioAccessService>-<DedicatedConf>-
periodicityOfSchedInfoNoGrantEdchTti2ms EdchCellClass 3 RNC none system_restricted Radio HSUPA Scheduler DCH TTI selected is 2msec. This parameter is ignored by the RNC when RB is ms Enumerate 100 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass>
mapped on to E-DCH non-scheduled data mode.
This parameter defines the Node Synchronization interval for the maintenance of
periodicNodeSynchronizationInterval SynchronizedSimulcastConf 3 RNC none system_restricted Radio Broadcast Services MBMS min Integer 1 30 10 31868 MBMS Broadcast UA7.1
RFN_BFN_Offset calculation
RB adaptation based on traffic: DL and UL
periodicUlSyncInterval UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation Defines the time interval to send periodic UL SYNC frames on radio links. s Integer 0 65535 10 27330 UA4.2
with start @64kbit/s
<BTSEquipment>-<IpRan>- points either to the EthernetPort object OR to the LAGroup object to be used to
physicalPortId EthernetBandwidthPool 0 BTS critical customer_setting Transport Ethernet N.A. ServiceLink N.A. 79362 Flexible Operator Configurable Split IP Iub UA8.1
<EthernetBandwidthPool> transmit the traffic flow associated to the considered EthernetBandwidthPool
TS 25.433 PICH Power
Power allocated on the Pich channel.PICH power must be high enough so that
pichPowerRelativeToPcpich PCH 3 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> none customer_tuning Radio Power Management PCH PICH channel is heard by all terminals in the cell without creating interferences dB Integer -10 5 -5 16717 RRC States Management UA3.0
preventing the mobile from reading CPICH channel.
But this power must be su
pilotPn Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_setting Radio Mobility [HHO][CDMA] N.A. Integer 0 511 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
This parameter defines, in the NRI mapping table supported by the RNC in
plmnId CsNriSplit 3 RNC <RNC>-<MocnParams>-<CsNriSplit> none customer_setting Radio Design MOCN N.A. ServiceLink N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, a pointer to a PLMN identifier
This parameter defines, in the IMSI Range mapping table supported by the RNC
plmnId ImsiRangeSplit 3 RNC <RNC>-<MocnParams>-<ImsiRangeSplit> none customer_setting Radio Design MOCN N.A. ServiceLink N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
in MOCN, a pointer to a PLMN identifier
This parameter defines, in the NRI mapping table supported by the RNC in
plmnId PsNriSplit 3 RNC <RNC>-<MocnParams>-<PsNriSplit> none customer_setting Radio Design MOCN N.A. ServiceLink N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
MOCN, a pointer to a PLMN identifier
FDDCells whose plmnId = MocnParams.commonPlmnId and locationAreaCode is
plmnIdList LacSplit 3 RNC <RNC>-<MocnParams>-<LacSplit> none customer_setting Radio Design MOCN in the range {lacRangeBegin .. lacRangeEnd} share PLMN list as defined in N.A. ServiceLink N.A. 28528 Multi-Operator Core Network (MOCN) UA7.1
plmnIdList
This value is used to compute the PLMN_value_tag information element of SIB1 if Management of system information change:
plmnValueTag FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Design Configuration N.A. Integer 0 63 0 26228 UA4.1
plmnValueTagMethodUsed is set to operatorSelected. notification to UE
Defines how the plmnValueTag for SIB1 is built.
If this parameter is set to :
Management of system information change:
plmnValueTagMethodUsed FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Design Configuration OperatorSelected: the PLMNValueTag sends in SIB is the one received from the N.A. Enumerate lacRac 26228 UA4.1
notification to UE
operator
lacRac: the PLMNValueTag sends in SIB is build using the LAC and the RAC of
the corre
<RadioAccessService>-<DedicatedConf>-
it specifies Puncture Limit for common E-DCH operation. NBAP & SIB5.
plNonMax CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH N.A. Float 0.44 1.00 0.04 0.80 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
Puncturing Limit used by the UE to determine the suitable SF to use on E-DPDCH
<RadioAccessService>-<EdpchInfoClass>-
plNonMax EdpchParameters 3 RNC none system_restricted Radio HSUPA Scheduler according to None Integer 11 25 N.A. 33327 MAC-e Scheduler Evolutions UA6.0
<EdpchParameters>
the selected Transport Block Size.
pMaxDlEDCH EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA dB Float -35 15 0,1 6 33481 E-AGCH Power Control UA5.1
List of FddCells (UC Id) on which FDDCell level counters configured in
pmFddCellList RtPerfScanner 3 RNC <RNC>-<RtPerfScanner> none customer_tuning Radio Counters N.A. String 0 N.A. 25101 Real Time Rnc Counters UA7.1
counterScreeningList should be activated
pMinDlEDCH EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA dB Float -35 15 0,1 -18 33481 E-AGCH Power Control UA5.1
This parameter gives the period with which the BTS generates PM files that can
pmObservationPeriod BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Counters min Enumerate 60 33602 15 min Node-B counters UA6.0
be retrieved by PM server.
TS 25.433
po1ForTfciBits DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Power Management Power Control power offset for the TFCI bits. The real value in dB is equal to N.A. Integer 0 24 0 34256 Merge UA050A Parameters into UA06 UA6.0
po1ForTpcBits*0.25
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
po1ForTfciBits PowerOffset 3 RNC none system_restricted Radio Power Management Power Control Power offset for the TFCI bits. dB Float 0 6 0,25 0 24475 3GPP compliant NBAP (mono-vendor) UA4.1
<PowerOffset>
Defines the PO2 DL TPC power offset for scenarios where there is only one
po2ForOneRlSet DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Power Management Power Control dB Float 0 6 0,25 1 34246 Power Control Enhancements UA6.0
radio link set in the active set
Defines the PO2 DL TPC power offset for scenarios where there are three radio
po2ForThreeOrMoreRlSet DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Power Management Power Control dB Float 0 6 0,25 6 34246 Power Control Enhancements UA6.0
link sets or more in the active set.
TS 25.433
po2ForTpcBits DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Power Management Power Control power offset for the TPC bits. The real value in dB is equal to N.A. Integer 0 24 24 34256 Merge UA050A Parameters into UA06 UA6.0
po2ForTpcBits*0.25
Defines the PO2 DL TPC power offset for scenarios where there are two radio
po2ForTwoRlSet DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Power Management Power Control dB Float 0 6 0,25 4 34246 Power Control Enhancements UA6.0
link sets in the active set
TS 25.433
po3ForPilotBits DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Power Management Power Control N.A. Integer 0 24 0 34256 Merge UA050A Parameters into UA06 UA6.0
power offset of the pilot bits. The real value in dB is equal to po3ForTpcBits*0.25
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
po3ForPilotBits PowerOffset 3 RNC none system_restricted Radio Power Management Power Control Power offset for the pilot bits. dB Float 0 6 0,25 0 24475 3GPP compliant NBAP (mono-vendor) UA4.1
<PowerOffset>
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_Poll
L2 improvements support (RLC & MAC-hs/e
pollingTimer DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols ms Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> Timer poll (RRC ie type) - OPTIONAL S/W for improved RLC)
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_Poll
pollingTimer DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] ms Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> Timer poll (RRC ie type) - OPTIONAL
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_Poll
pollingTimer UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation ms Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> Timer poll (RRC ie type) - OPTIONAL
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_Poll
pollingTimer UlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][UL] ms Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode> Timer poll (RRC ie type) - OPTIONAL
<RadioAccessService>-<RlcConfClass>- TS 25.331 Poll_Window
L2 improvements support (RLC & MAC-hs/e
pollWindow DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols N.A. Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> Percentage of transmission window, threshold for polling S/W for improved RLC)
<RadioAccessService>-<RlcConfClass>- TS 25.331 Poll_Window
pollwindow DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> Percentage of transmission window, threshold for polling
<RadioAccessService>-<RlcConfClass>- TS 25.331 Poll_Window
pollwindow UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation N.A. Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> Percentage of transmission window, threshold for polling
<RadioAccessService>-<RlcConfClass>- TS 25.331 Poll_Window
pollwindow UlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][UL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode> Percentage of transmission window, threshold for polling
Indicates that UE is in bad radio conditions based on UL SIR error. This
<RadioAccessService>-<EdchRncConf>- parameter corresponds to the Event E (Measurement Threshold 2) of NBAP
poorSirErrorThreshold EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control dB Float -31.0 31.0 0.5 -31.0 125855 E-DCH call retainability improvements UA08.1
<EdchRncSmartphoneConf> dedicated measurement. Meaningful only if
multiRabBadRadioSmartEdchResourceUsageActivation, psRabBadRadioSmartE
This parameter defines the role of the port. At least one EthernetPort shall be
portRole EthernetPort 2 BTS <BTSEquipment>-<EthernetPort> none customer_setting BTS ATM N.A. Enumerate Backhaul 100791 BTS daisy chaining through the nodeB LR13.1
configured with backhaul value.
powerBalancingRequired DlUserService 3 RNC <RadioAccessService>-<DlUserService> none system_restricted Radio Power Management Power Balancing Indicates if this DlUserService uses power balancing N.A. Boolean N.A. 20519 Power Balancing UA4.1
powerConfId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Power Management identifier of the PowerConfClass instance. N.A. ServiceLink N.A. 0 none UA1
Pointer to the PowerConfClass instance, allowing to get the initial UL SIR Target
powerConfId NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Power Management N.A. ServiceLink N.A. 27034 Update of RRM parameters during SRLR UA6.0
according to the UlUsPowerConf Id
<RadioAccessService>-<DedicatedConf>-
This parameter specifies algorithm to be used by UE to interpret TPC commands.
powerCtrlAlgo CommonEdchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none customer_setting Radio Power Management FACH N.A. Enumerate algo1 108103 Enhanced Cell Fach for DL and UL LR14.2
SIB5
<CommonEdchInfo>
<RadioAccessService>-<DedicatedConf>- TS 25.331 Power Control Algorithm
powerCtrlAlgo UlInnerLoopConf 3 RNC none system_restricted Radio Power Management UL Inner Loop N.A. Enumerate algo1 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<UlInnerLoopConf> Specifies algorithm to be used by UE to interpret TPC commands
External Document Page 46 Alcatel-Lucent
identifier of the powerCtrlConfclass instance when power control optimized for Evolution of Fast L1 synchro parameters for
powerCtrlConfFastL1Id FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management Fast L1 Synchro N.A. ServiceLink N.A. 119866 LR Future
Fast L1 synchronization QChat
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
identifier of the powerCtrlConfclass instance (from NeighbouringRNC) when Evolution of Fast L1 synchro parameters for
powerCtrlConfFastL1Id NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Power Management Fast L1 Synchro N.A. ServiceLink N.A. 119866 LR Future
power control optimized for Fast L1 synchronization QChat
powerCtrlConfId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Power Management identifier of the powerCtrlConfclass instance N.A. ServiceLink N.A. 0 none UA1
powerCtrlConfId NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Power Management identifier of the powerCtrlConfclass instance N.A. ServiceLink N.A. 13450 Inter frequency Hard HO UA3.0
<RadioAccessService>-<DedicatedConf>- Margin to be taken when RNC power allocation underestimates power
powerMargin PowerConfClass 3 RNC none system_restricted Radio Power Management BTS Self tuning dB Float -35 15 0,1 0,2 0 none UA6.0
<PowerConfClass> consumption.
powerOffsetERGCHServingNoSHO EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none expert_tuning Radio HSUPA dB Float -12,8 12,7 0,1 1,5 33481 E-AGCH Power Control UA5.1
powerOffsetERGCHServingSHO EdchConf 3 BTS <BTSEquipment>-<BTSCell>-<EdchConf> none system_restricted Radio Mobility dB Float -12,8 12,7 0,1 1,5 33481 E-AGCH Power Control UA5.1
<RadioAccessService>-<DedicatedConf>- it specifies E-DCH Power Offset for Scheduling Info. NBAP & SIB5.
powerOffsetForSchedInfo CommonEdchEdpchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH dB Integer 0 6 1 6 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchEdpchInfo>
Only used when no MACd PDU is included in the same MAC-e PDU and E-DCH
<RadioAccessService>-<DedicatedConf>- TTI selected is 10msec. This parameter is ignored by the RNC when RB is
powerOffsetForSchedInfo EdchCellClass 3 RNC none system_restricted Radio HSUPA Power Control dB Integer 0 6 3 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass> mapped on to E-DCH non-scheduled data mode.
In UA05, this parameter was defined as powerOffsetForSchedInfo in th
Only used when no MACd PDU is included in the same MAC-e PDU and E-DCH
<RadioAccessService>-<DedicatedConf>-
powerOffsetForSchedInfoEdchTti2ms EdchCellClass 3 RNC none system_restricted Radio HSUPA Power Control TTI selected is 2msec. This parameter is ignored by the RNC when RB is dB Integer 0 6 3 33327 MAC-e Scheduler Evolutions UA6.0
<EdchCellClass>
mapped on to E-DCH non-scheduled data mode.
TS 25.331
powerOffsetPO RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none expert_tuning Radio Power Management RACH dB Integer 1 8 3 24774 RACH Capacity Enhancements UA2.1
Power step when no acquisition indicator is received in dB
it specifies, in dB, Power offset between the last transmitted preamble and the
initial DPCCH transmission in the Enhanced Uplink in CELL_FACH
<RadioAccessService>-<DedicatedConf>-
state and Idle mode.
powerOffsetPpe CommonEdchPreambleCtrlInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH dB Integer -5 10 1 0 108103 Enhanced Cell Fach for DL and UL LR14.2
SIB5.
<CommonEdchPreambleCtrlInfo>
The power offset between the last transmitted preamble and the control part of
powerOffsetPpM0 RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none expert_tuning Radio Power Management RACH N.A. Integer -5 10 0 34303 WQA Detected cell identification UA6.0
the message for PRACH CTFC0.
The power offset between the last transmitted preamble and the control part of
powerOffsetPpM1 RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none expert_tuning Radio Power Management RACH N.A. Integer -5 10 0 34303 WQA Detected cell identification UA6.0
the message for PRACH CTFC1.
identifier of the PowerPartConfClass instance.
It is possible to precise different configurations garanteeing minimal powers for
powerPartId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Power Management Configuration speech and data.
N.A. ServiceLink N.A. 0 none UA1
Consequently, the power used for speech calls is lower than :
(1-min_data_power_ratio)*CallAdmissionPower
<RNC>-<NodeB>-<FDDCell>-
powerRaiseLimit LimitedPowerIncrease 2 RNC partial system_restricted Radio Power Management Defines the power raise limit when Limited Power Increase is used; dB Integer 0 10 5 28016 3GPP compliant NBAP (multi-vendor) UA5.0
<LimitedPowerIncrease>
powerStepSize Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS Step size of power variation. Only used when the powerVariation is ON dB Float 0,1 2 0,1 0,3 34195 Support OCNS with HSDPA UA6.0
powerVariation Ocns 3 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> none customer_tuning Radio Power Management OCNS Indicates whether DL OCNS power shall be varied or not. N.A. Boolean FAUX 34195 Support OCNS with HSDPA UA6.0
The GPS receiver outputs a 1PPS signal, the rising edge of which is placed at the
top of the GPS or UTC one second tic mark epoch as specified by the Time Additional GPS receiver support for Node-B
ppsCableDelay SatelliteData 3 BTS <BTSEquipment>-<SatelliteData> none customer_setting Radio Unused ns Integer 0 999999 0 98839 Cancelled
Mode. The 1PPS Cable Delay command allows the user to offset the 1PPS time Syncronization
mark in one nanosecond in
The GPS receiver outputs a one pulse-per-second (1PPS) signal with the rising
edge placed on top of the GPS/UTC one second tic mark. The 1PPS Offset Additional GPS receiver support for Node-B
ppsPulseOffset SatelliteData 3 BTS <BTSEquipment>-<SatelliteData> none customer_setting Radio Unused ns Integer 0 999999999 0 98839 Cancelled
command allows the user to offset the 1PPS time mark in one nanosecond Syncronization
increments. This offset can be used
TS 25.433 Scrambling code number
prachScramblingCode RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none system_restricted Radio Channels & Bearers RACH N.A. Integer 0 15 0 24774 RACH Capacity Enhancements UA1
Scrambling code used by the RACH channel,
TS 25.331
preambleRetransMax RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none system_restricted Radio Channels & Bearers RACH N.A. Integer 1 64 32 24774 RACH Capacity Enhancements UA2.1
Maximum number of preambles in one preamble ramping cycle
TS 25.433 Preamble signatures
preambleSignature RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none system_restricted Radio Channels & Bearers RACH N.A. BitString 16 16 1 24774 RACH Capacity Enhancements UA1
This string defines the set of allowed signatures of the PRACH preamble part.
TS 25.433 Preamble Threshold
This value defines the threshold for preamble detection. The threshold is set in dB
preambleThreshold RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none expert_tuning Radio Power Management RACH over the interference level.
N.A. Integer 0 72 24 24774 RACH Capacity Enhancements UA1
The real value in dB of the preamble threshold is given by the formula: -
36+0.5*preambleThreshold.
<RadioAccessService>-<Preemption>-
<PreemptionFrequency>- Preemption capability of the service; Pre-emption process for DCH and
preemptionCapability PreemptionOmcrPcPvInfo 3 RNC none customer_setting Radio Load Management Pre-emption N.A. Enumerate N.A. 33322 UA6.0
<PreemptionPcPvServiceClass>- enum: may_trigger_preemption(0), shall_not_trigger_preemption(1) HSDPA/HSUPA
<PreemptionOmcrPcPvInfo>
<RadioAccessService>-<QChatConfClass>- Optimized performance for QCHAT (Push To
preemptionCapability QChatArpAttribute 3 RNC none customer_setting Radio Load Management Pre-emption Preemption capability of the service; N.A. Enumerate ShallNotTriggerPreemption 108961 UA8.1
<QChatArpAttribute> Talk)
PreemptionCapabilityProcedureIn <RadioAccessService>-<Preemption>- Indicates if CAC failure during Always On to DCH procedure may trigger Pre-emption process for DCH and
preemptionCapabilityForAlwaysOnToDch 3 RNC none customer_setting Radio Load Management Pre-emption N.A. Enumerate ShallNotTriggerPreemption 33322 UA6.0
fo <PreemptionCapabilityProcedureInfo> preemption. HSDPA/HSUPA
PreemptionCapabilityProcedureIn <RadioAccessService>-<Preemption>- Indicates if CAC failure during Always On to E-DCH procedure may trigger Pre-emption process for DCH and
preemptionCapabilityForAlwaysOnToEdch 3 RNC none customer_setting Radio Load Management Pre-emption N.A. Enumerate ShallNotTriggerPreemption 33322 UA6.0
fo <PreemptionCapabilityProcedureInfo> preemption. HSDPA/HSUPA
PreemptionCapabilityProcedureIn <RadioAccessService>-<Preemption>- Indicates if CAC failure during Always On to HS-DSCH procedure may trigger Pre-emption process for DCH and
preemptionCapabilityForAlwaysOnToHsDsch 3 RNC none customer_setting Radio Load Management Pre-emption N.A. Enumerate ShallNotTriggerPreemption 33322 UA6.0
fo <PreemptionCapabilityProcedureInfo> preemption. HSDPA/HSUPA
PreemptionCapabilityProcedureIn <RadioAccessService>-<Preemption>- Pre-emption process for DCH and
preemptionCapabilityForMobility 3 RNC none customer_setting Radio Load Management Pre-emption Indicates if CAC failure during a mobility procedure may trigger preemption. N.A. Enumerate ShallNotTriggerPreemption 33322 UA6.0
fo <PreemptionCapabilityProcedureInfo> HSDPA/HSUPA
preemptionCapabilityForRrcEstabCauseOtherThanEmer PreemptionCapabilityProcedureIn <RadioAccessService>-<Preemption>- Indicates if CAC failure during an RRC establishment cause other than Pre-emption process for DCH and
3 RNC none customer_setting Radio Load Management Pre-emption N.A. Enumerate ShallNotTriggerPreemption 33322 UA6.0
gencyCall fo <PreemptionCapabilityProcedureInfo> Emergency Call may trigger preemption HSDPA/HSUPA
<RadioAccessService>-<Preemption>- Maximum number of simultaneous resources pre-emption actions the RNC can Pre-emption process for DCH and
preemptionDeallocationBatchDepth PreemptionDeallocationInfo 3 RNC none system_restricted Radio Load Management Pre-emption N.A. Integer 0 500 10 33322 UA6.0
<PreemptionDeallocationInfo> support per RNC board (it depends on RNC capacity). HSDPA/HSUPA
<RadioAccessService>-<Preemption>- Multiplication factor for downlinkCurrentBitRate targeted by pre-emption Pre-emption process for DCH and
preemptionDeallocationFactorInDownlink PreemptionDeallocationInfo 3 RNC none expert_tuning Radio Load Management Pre-emption % Integer 100 500 (200, 120) 33322 UA6.0
<PreemptionDeallocationInfo> deallocation in DL. Two instances: 0=High factor 1=Low factor HSDPA/HSUPA
<RadioAccessService>-<Preemption>- Multiplication factor for uplinkCurrentBitRate targeted by pre-emption deallocation Pre-emption process for DCH and
preemptionDeallocationFactorInUplink PreemptionDeallocationInfo 3 RNC none expert_tuning Radio Load Management Pre-emption % Integer 100 500 (200, 120) 33322 UA6.0
<PreemptionDeallocationInfo> in UL. Two instances: 0=High factor 1=Low factor HSDPA/HSUPA
<RadioAccessService>-<Preemption>- Bit rate in downlink at which RNC switches from high ([0]) Dl factor to low ([1]) Dl Pre-emption process for DCH and
preemptionDeallocationThresholdInDownlink PreemptionDeallocationInfo 3 RNC none expert_tuning Radio Load Management Pre-emption Kbits/s Integer 0 2048 128 33322 UA6.0
<PreemptionDeallocationInfo> factor HSDPA/HSUPA
<RadioAccessService>-<Preemption>- Bit rate in Uplink at which RNC switches from high ([0]) Dl factor to low ([1]) Dl Pre-emption process for DCH and
preemptionDeallocationThresholdInUplink PreemptionDeallocationInfo 3 RNC none expert_tuning Radio Load Management Pre-emption Kbits/s Integer 0 2048 128 33322 UA6.0
<PreemptionDeallocationInfo> factor HSDPA/HSUPA
Downlink Frequency used by the Cell. The dlFrequencyNumber attribute is a value
<RadioAccessService>-<Preemption>- Pre-emption process for DCH and
preemptionDlFrequencyNumber PreemptionFrequency 3 RNC none customer_init Radio Load Management Pre-emption between 0.. 16383, corresponding to 5 7 * FDl frequency in MHz. (cf TS 25.104, N.A. Integer 0 16383 N.A. 33322 UA6.0
<PreemptionFrequency> HSDPA/HSUPA
section 5.4).
Preemption process steps that are followed by RNC; enum: downgrade_only(0), Pre-emption process for DCH and
preemptionDowngradeReleaseSteps Preemption 3 RNC <RadioAccessService>-<Preemption> none customer_setting Radio Load Management Pre-emption N.A. Enumerate DowngradeThenRelease 33322 UA6.0
downgrade_then_release(1), release_only(2) HSDPA/HSUPA
Downlink rate above which and towards which the Dl preemption shall be Pre-emption process for DCH and
preemptionFloorBitRateInDownlink Preemption 3 RNC <RadioAccessService>-<Preemption> none expert_tuning Radio Load Management Pre-emption Kbits/s Integer 1 2048 (64, 32, 8) 33322 UA6.0
triggered for each of the three OLS HSDPA/HSUPA
Uplink rate above which and towards which the Ul preemption shall be triggered Pre-emption process for DCH and
preemptionFloorBitRateInUplink Preemption 3 RNC <RadioAccessService>-<Preemption> none expert_tuning Radio Load Management Pre-emption Kbits/s Integer 1 2048 (64, 32, 8) 33322 UA6.0
for each of the three OLS HSDPA/HSUPA
Allows operator to decide if preemption capability and preemption vulnerability in
Pre-emption process for DCH and
preemptionMode Preemption 3 RNC <RadioAccessService>-<Preemption> none customer_setting Radio Load Management Pre-emption the Allocation/Retention RANAP IE is used in preemption; enum: preemption_ N.A. Enumerate OMCRPCPVInfo 33322 UA6.0
HSDPA/HSUPA
using_RANAP_PC_PV_info(0), preemption_using_OMCR_PC_PV_info(1)
<RadioAccessService>-<Preemption>-
<PreemptionFrequency>- Pre-emption process for DCH and
preemptionPriorityOfService PreemptionServiceInfo 3 RNC none customer_setting Radio Load Management Pre-emption Priority of the service for preemption process N.A. Integer 1 20 N.A. 33322 UA6.0
<PreemptionPcPvServiceClass>- HSDPA/HSUPA
<PreemptionServiceInfo>
Indicates if RANAP queuing allowed of allocation/retention priority IE is taken into Pre-emption process for DCH and
preemptionQueuingAllowedIE Preemption 3 RNC <RadioAccessService>-<Preemption> none customer_setting Radio Load Management Pre-emption N.A. Boolean FAUX 33322 UA6.0
account in deciding if a service is eligible for preemption reallocation queue HSDPA/HSUPA
<RadioAccessService>-<Preemption>-
<PreemptionFrequency>- Priority of reallocation retries for this service; enum: priority_reallocation(0), Pre-emption process for DCH and
preemptionQueuingReallocationPriority PreemptionServiceInfo 3 RNC none customer_setting Radio Load Management Pre-emption N.A. Enumerate N.A. 33322 UA6.0
<PreemptionPcPvServiceClass>- regular_reallocation(1) HSDPA/HSUPA
<PreemptionServiceInfo>
<RadioAccessService>-<Preemption>-
Pre-emption process for DCH and
preemptionQueuingReallocationRetryMaxNumber PreemptionQueuingReallocation 3 RNC <PreemptionQueuingInfo>- none expert_tuning Radio Load Management Pre-emption Number of times RNC retries to reallocate resources to a RAB in-queue N.A. Integer 0 10 N.A. 33322 UA6.0
HSDPA/HSUPA
<PreemptionQueuingReallocation>
<RadioAccessService>-<Preemption>-
Pre-emption process for DCH and
preemptionQueuingReallocationTimer PreemptionQueuingReallocation 3 RNC <PreemptionQueuingInfo>- none expert_tuning Radio Load Management Pre-emption Period with which RNC retries to reallocate resources to a RAB in-queue ms Integer 0 10000 N.A. 33322 UA6.0
HSDPA/HSUPA
<PreemptionQueuingReallocation>
Uplink Frequency used by the Cell. The ulFrequencyNumber attribute is a value
<RadioAccessService>-<Preemption>- Pre-emption process for DCH and
preemptionUlFrequencyNumber PreemptionFrequency 3 RNC none customer_init Radio Load Management Pre-emption between 0.. 16383, corresponding to 5 7 * FUl frequency in MHz. (cf TS 25.104, N.A. Integer 0 16383 N.A. 33322 UA6.0
<PreemptionFrequency> HSDPA/HSUPA
section 5.4).
<RadioAccessService>-<Preemption>-
<PreemptionFrequency>- Vulnerability of the service; Pre-emption process for DCH and
preemptionVulnerability PreemptionOmcrPcPvInfo 3 RNC none customer_setting Radio Load Management Pre-emption N.A. Enumerate N.A. 33322 UA6.0
<PreemptionPcPvServiceClass>- enum: not_preemptable(0), preemptable(1) HSDPA/HSUPA
<PreemptionOmcrPcPvInfo>
<RadioAccessService>-<QChatConfClass>- Optimized performance for QCHAT (Push To
preemptionVulnerability QChatArpAttribute 3 RNC none customer_setting Radio Load Management Pre-emption Vulnerability of the service N.A. Enumerate Preemptable 108961 UA8.1
<QChatArpAttribute> Talk)
Operator defined TTI selection for interactive traffic with corresponding ARP and
<RadioAccessService>-<TrafficClassBasedQos>-
preferredEdchTti ThpBasedQos 3 RNC none customer_setting Radio HSUPA Congestion Control THP setting, and background traffic with corresponding ARP setting. N.A. Enumerate 10ms 120363 Smart phone EDCH resource usage. LR13.1
<ArpBasedQos>-<ThpBasedQos>
Meaningful only if rabQosSmartEdchResourceUsageActivation is True
Preferred EDCH TTI for Pc cards.
preferredEdchTtiForPcCard EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control N.A. Enumerate 10ms 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if operatorDeterminesDeviceTypeFlag is True
Preferred EDCH TTI for Smart
preferredEdchTtiForSmartphone EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control N.A. Enumerate 10ms 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if operatorDeterminesDeviceTypeFlag is True
Preferred EDCH TTI for tablets.
preferredEdchTtiForTablet EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control N.A. Enumerate 10ms 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if operatorDeterminesDeviceTypeFlag is True
This parameter contributes to the definition of IPV6 routes to reach the IPV6
<BTSEquipment>-<IpRan>-<RoutingTable>- Node B targets. A route definition is an IPV6 address with prefix length and IPv6 Support for OAM Traffic on the NodeB
prefixLength IpV6Route 3 BTS none customer_init Transport IP N.A. Integer 0 128 1 64 108956 LR Future
<IpV6Route> Nexthop IP address. This parameter is the second entry (Prefix Length).This (OneBTS)
parameter applies for bo
This parameter contributes to the definition of IPV6 subnets used for IP address
<BTSEquipment>-<IpRan>-<IpFilteringTable>- SSH/sFTP support in the iBTS and IP address
prefixLength IpV6Subnet 3 BTS none customer_init Transport IP source filtering, with subnetIpAddress and type of traffic. This parameter applies N.A. Integer 0 128 1 64 111416 LR Future
<IpV6Subnet> source filtering on Node B & RNC
for IPV6 Native IP Iub.
Pointer to the primary Lte Plmn for the eNB (the one that is part of eNB Global
primaryLtePlmnId LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none expert_tuning Radio Mobility LTE N.A. ServiceLink N.A. 100894 UMTS to LTE Handover LR14.2
Identity and Cell Global Identity)
<RadioAccessService>-<UlUserService>- The RBSetConf of the reference transport channel which will be used for update Power Control and Rate Matching
primaryReferenceUlRbSetConfId UlOuterLoopPowerCtrl 3 RNC none system_restricted Radio Power Management N.A. ServiceLink <unset> 28040 UA4.2
<UlOuterLoopPowerCtrl> of UL SIR target if validity condition is not fulfilled by any reference transport enhancements
TS 25.433
<RNC>-<NodeB>-<FDDCell>- Primary scrambling Code used by the neighbouring cell.The scrambling codes are
DummyUmtsNeighbouringFddCell
primaryScramblingCode 3 RNC <Cdma1xMobilityInfo>- none customer_setting Radio Mobility divided into 512 sets, each of them contains a primary scrambling code and 15 N.A. Integer 0 511 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
List
<DummyUmtsNeighbouringFddCellList> secondary scrambling codes.The primary scrambling codes consist of scrambling
codes n=1
TS 25.433
Primary scrambling Code used by the cell.The scrambling codes are divided into
primaryScramblingCode FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial customer_setting Radio Mobility 512 sets, each of them contains a primary scrambling code and 15 secondary N.A. Integer 0 511 N.A. 0 none UA1
scrambling codes.The primary scrambling codes consist of scrambling codes
n=16*i, where i=
TS 25.433
primaryScramblingCode RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_setting Radio Mobility N.A. Integer 0 511 N.A. 23076 RNC 2500 UA6.0
Primary scrambling code used by the neighbouring cell
priority LocalCellGroup 0 BTS <BTSEquipment>-<LocalCellGroup> critical customer_setting Radio Design Priority of the frequency N.A. Integer 1 2 1 16746 Capacity licensing UA6.0
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
priority Service 3 RNC <AlarmPriorityTableConfClass>-<Frequency>- none customer_setting Radio Mobility [HHO][iMCTA] Priority used in iMCTA tables to discriminate the frequency usage N.A. Enumerate PNA 29415 UA5.0
(iMCTA)
<Service>
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
priority Service 3 RNC <CacPriorityTableConfClass>-<Frequency>- none customer_setting Radio Mobility [HHO][iMCTA] Priority used in iMCTA tables to discriminate the frequency usage N.A. Enumerate PNA 29415 UA5.0
External Document Page 47 (iMCTA) Alcatel-Lucent
<Service>
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
priority Service 3 RNC <ServicePriorityGeneralTableConfClass>- none customer_setting Radio Mobility [HHO][iMCTA] Priority used in iMCTA tables to discriminate the frequency usage N.A. Enumerate PNA 29415 UA5.0
(iMCTA)
<Frequency>-<Service>
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
priority Service 3 RNC <ServicePriorityTableForHsdpaConfClass>- none customer_setting Radio Mobility [HHO][iMCTA] Priority used in iMCTA tables to discriminate the frequency usage N.A. Enumerate PNA 29415 UA5.0
(iMCTA)
<Frequency>-<Service>
<RadioAccessService>-<Imcta>-
intelligent Multi-Carrier Traffic Allocation
priority Service 3 RNC <ServicePriorityTableForHsupaConfClass>- none customer_setting Radio Mobility [HHO][iMCTA] Priority used in iMCTA tables to discriminate the frequency usage N.A. Enumerate PNA 29415 UA5.0
(iMCTA)
<Frequency>-<Service>
This parameter contains the list of classes that need to be excluded from class
barring.
priorityAccessClasses AutomatedCellBarring 3 RNC <RadioAccessService>-<AutomatedCellBarring> none expert_tuning Radio Load Management Cell Barring There are 10 access classes. This parameter needs to define which group of N.A. BitString 10 10 0 31805 Automatic Cell Barring on Service Outage UA5.0
classes can be
excluded from barring. Normally no classes are defined as priority classes
priorityAccessClassesAllowed AutomatedCellBarring 3 RNC <RadioAccessService>-<AutomatedCellBarring> none customer_setting Radio Load Management Cell Barring This parameter is used to allow priority access classes N.A. Boolean FAUX 31805 Automatic Cell Barring on Service Outage UA5.0
This parameter identifies the Priority Level of Qchat is used to recognise the
<RadioAccessService>-<QChatConfClass>- Optimized performance for QCHAT (Push To
priorityLevel QChatArpAttribute 3 RNC none customer_setting Radio Load Management Pre-emption Qchat Call on receiving RANAP Allocation/Retention Priority communicated by N.A. Integer 1 15 11 108961 UA8.1
<QChatArpAttribute> Talk)
Qchat server via CN to RNC.
<RadioAccessService>-<SoftCongestion>-
<SoftCongestionFrequency>- This parameter is an integer {highest (0)... lowest (120)} indicating the priority of
priorityOfServiceBasedOnOls SoftCongestionHspaService 3 RNC none customer_setting Radio Load Management Soft Congestion N.A. Integer 1 120 120 119026 Soft Congestion UA8.1
<SoftCongestionServiceInfo>- the hspa service used for the soft congestion process.
<SoftCongestionHspaService>
This threshold is needed to be defined to determine if serving cell quality Ec/No is
good or bad upon reception of event 1A or 1C or 1E report. If the PRL quality is
prlQualityThresholdForAddingNewCellMaceesToEdchAs EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none expert_tuning Radio Synchronisation Radio synchronisation dB Float -25.0 0.0 0.5 -19.0 89563 Enhanced L2 for Uplink LR13.3
worse than this threshold value, the new MAC-e/es cell shall be added to both
DCH and E-D
UE Periodic Measurements to Support
probeActivateEnable Mme 3 RNC <RNC>-<Mme> none customer_setting Radio Measurements It Indicates whether the probe mode of MME feature is activated N.A. Boolean FAUX 34212 UA6.0
Performance Evaluation
Defines the filter coefficient to be applied by the UE to the intra-frequency UE Periodic Measurements to Support
probeFilterCoefficient Mme 3 RNC <RNC>-<Mme> none expert_tuning Radio Measurements N.A. Enumerate 0 34212 UA6.0
measurement quantities Performance Evaluation
The number of cells reported for RSCP and Ec/No in the Periodic measurement UE Periodic Measurements to Support
probeMaxIntraFreqCells Mme 3 RNC <RNC>-<Mme> none system_restricted Radio Measurements N.A. Integer 1 6 1 34212 UA6.0
reporting for performance evaluation in probe mode. Performance Evaluation
UE Periodic Measurements to Support
probeMaxUePerTmu Mme 3 RNC <RNC>-<Mme> none system_restricted Radio Measurements Maximum number of UEs on a TMU with probe mode measurements activated N.A. Integer 1 500 20 34212 UA6.0
Performance Evaluation
UE Periodic Measurements to Support
probeReportInterval Mme 3 RNC <RNC>-<Mme> none expert_tuning Radio Measurements Defines the reporting period for the UE measurements reports s Enumerate 20 34212 UA6.0
Performance Evaluation
This parameter defines the Total processing variance budget for soft combining
processingVariance SynchronizedSimulcastConf 3 RNC none system_restricted Radio Broadcast Services MBMS algorithm. The effective window for soft combining is (TTI – ms Float 0 19,875 0,125 10 31868 MBMS Broadcast UA7.1
SoftCombiningProcessingVariance) = 2*RFNOffsetTarget
Robust Header Compression (ROHC - RFC
profiles RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC Indicate the list of allowed profiles. (1 and/or 2) (Mode: U-O-R N.A. Integer 1 2 11 22845 LR Future
3095/4815)
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_poll_prohibit
L2 improvements support (RLC & MAC-hs/e
prohibitedPollingTimer DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols ms Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> Timer poll prohibit - Minimum time between polls in ms - OPTIONAL S/W for improved RLC)
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_poll_prohibit
prohibitedPollingTimer DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] ms Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> Timer poll prohibit - Minimum time between polls in ms - OPTIONAL
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_poll_prohibit
prohibitedPollingTimer UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation ms Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> Timer poll prohibit - Minimum time between polls in ms - OPTIONAL
<RadioAccessService>-<RlcConfClass>- TS 25.331 Timer_poll_prohibit
prohibitedPollingTimer UlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][UL] ms Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode> Timer poll prohibit - Minimum time between polls in ms - OPTIONAL
<RadioAccessService>-<RlcConfClass>- L2 improvements support (RLC & MAC-hs/e
prohibitedStatusTimer DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols #value ms Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> S/W for improved RLC)
TS 25.331 Timer_Status_Prohibit
<RadioAccessService>-<RlcConfClass>- Minimum time in ms between STATUS reports. This timer shall be started when
prohibitedStatusTimer DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] ms Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> the RLC entity is created. When the timer expires the transmission of a status
report shall be triggered and the timer shall be restarted. This ti
TS 25.331 Timer_Status_Prohibit
<RadioAccessService>-<RlcConfClass>- Minimum time in ms between STATUS reports. This timer shall be started when
prohibitedStatusTimer UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation ms Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> the RLC entity is created. When the timer expires the transmission of a status
report shall be triggered and the timer shall be restarted. This ti
TS 25.331 Timer_Status_Prohibit
<RadioAccessService>-<RlcConfClass>- Minimum time in ms between STATUS reports. This timer shall be started when
prohibitedStatusTimer UlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][UL] ms Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode> the RLC entity is created. When the timer expires the transmission of a status
report shall be triggered and the timer shall be restarted. This ti
proprietaryHSDPAOCNSActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSDPA Allows activation/deactivation HSDPA-OCNS N.A. Boolean FAUX 34195 Support OCNS with HSDPA UA6.0
proprietaryOCNSActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management OCNS Used to activation/deactivation R99 OCNS N.A. Boolean FAUX 34248 OCNS – R99 UA6.0
Indicates if information data messages must be generated and sent to the
protocolTraceInfoMsgEnabled Mme 3 RNC <RNC>-<Mme> none customer_setting Radio Call Trace N.A. Boolean FAUX 108192 RNC Full UE Tracing Capability UA8.1
protocole trace server or not.
psCallsDeltaCfnDelay represents the delay*2 + 1 in ms to add to the Always-on
psCallsDeltaCfnDelay RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Channels & Bearers Activation Time ms Integer 0 511 160 27034 Update of RRM parameters during SRLR UA6.0
Downsize and DL RB Rate Adaptation Downsize case
TS 25.433 Primary SCH Power
Power on the Primary Synchro Channel relative to the Pcpich power.
Parameter Class Evolution in UA08 & UTRAN
pschPowerRelativeToPcpich FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Power Management Common Channels SCH Power represents a power level relative to the FDD-CPICH power dB Float -35 15 0,1 -5 80685 UA8.1
model simplification
configured in a cell.
With a low SCH Power transmitted by the cell, the mobile can’t obta
pschTstdIndicator FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial system_restricted Radio Protocols Indicate if the Time Switched Transmit Diversity is activated on PrimarySCH N.A. Enumerate inactive 28016 3GPP compliant NBAP (multi-vendor) UA5.0
<RNC>-<PsFlexService>-<PsNriParams>- RNC Connection to multiple Core Network
psCoreNetworkAccessId PsNriMapping 3 RNC none system_restricted Transport Iu Flex N.A. ServiceLink N.A. 29417 UA5.0
<PsNriMapping> nodes (Iu-Flex)
Indicates the DRX cycle length coefficient used to be attached to a CN PS
domain in this cell.
psDrxCynLngCoef FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Accessibility Paging It refers to 'k' in the formula as specified in 25.304.
N.A. Integer 6 9 6 24075 Paging repetition enhancements UA2.1
The DRX cycle length shall be 2^k *PBP frames, where k is an integer and PBP is
the Paging Block Perio
The reference S-CCPCH power for isolated cell.
<RNC>-<NodeB>-<FDDCell>- Used by RRM algorithm for selection of the MBMS delivery mode (PTP or PTM)
pSelectiveCombiningGain MbmsResourceClass3 3 RNC none system_restricted Radio Broadcast Services MBMS dB Integer 0 255 2 31868 MBMS Broadcast UA7.1
<MbmsResourceClass3> Parameter applicable in PTM&PTP allowed Service Areas and PTM only Service
Areas
This parameter determines the mapping of basic call types to PS group call type
psGroupCall BasicCallType 3 RNC <RadioAccessService>-<BasicCallType> none expert_tuning Radio Call Admission Control CAC If the boolean is true, the corresponding basic call type (userLabel) is a part of N.A. Boolean N.A. 127550 Traffic Filtering in Cell Overload LR13.1
PS group call type
psNriLength MocnParams 3 RNC <RNC>-<MocnParams> none expert_tuning Radio Design MOCN Number of bits constituting the Network Resource Identifier for PS domain N.A. Integer 0 10 N.A. CR182545 RAN Model new parameter NRI length UA8.1
The reference S-CCPCH power for surrounded cell.
<RNC>-<NodeB>-<FDDCell>- Used by RRM algorithm for selection of the MBMS delivery mode (PTP or PTM)
pSoftCombiningGain MbmsResourceClass3 3 RNC none system_restricted Radio Broadcast Services MBMS dB Integer 0 255 3 31868 MBMS Broadcast UA7.1
<MbmsResourceClass3> Parameter applicable in PTM&PTP allowed Service Areas and PTM only Service
Areas
Selects the maximum total UL noise rise level beyond which 2ms TTI is not
allowed for PS only RAB.
psOnlyRotThresholdForTtiSelection EdchResource 3 RNC <RNC>-<NodeB>-<FDDCell>-<EdchResource> none expert_tuning Radio HSUPA Congestion Control dB Float 0.0 20.0 0.1 7.0 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if cellLoadS1ThresholdSmartEdchResourceUsageActivation is
True
Enables single PS rab or multi PS rab bad radio conditions sub feature of the
psRabBadRadioSmartEdchResourceUsageActivation EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_init Radio Retainability HSUPA Smart EDCH resource usage feature for TTI selection. N.A. Boolean false 125855 E-DCH call retainability improvements UA08.1
Meaningful only if smartEdchResourceUsageActivation is True
Enables single PS rab or multi PS rab bad radio conditions sub feature of the
Smart EDCH resource usage feature for TTI selection. This is the FDDCell MO
psRabBadRadioSmartEdchResourceUsageActivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Retainability HSUPA N.A. Boolean false 125855 E-DCH call retainability improvements UA08.1
equivalent of psRabBadRadioSmartEdchResourceUsageActivation.
Meaningful only if smartEdchResourceUsa
Coefficient to apply to AO timer length for PS Interactive Signalling RAB. The AO
psSigAoTimerCoeff AlwaysOnConf 3 RNC <RadioAccessService>-<AlwaysOnConf> none expert_tuning Radio PS Call management Always-on timers for PS Interactive Signalling RAB shall be set according to regular AO N.A. Float 0,1 10 0,1 1 108389 Direct PCH to DCH Transition UA8.1
timer multiplied by psSigAoTimerCoeff.
This parameter defines the threshold in number of UEs in normal cell power load
to transition from PTM to No Transmission for an isolated cell
ptmToNoTxIsolatedCell MbmsResourceClass 3 RNC none system_restricted Radio Broadcast Services MBMS Used by RRM algorithm for decision to setup a PTM RB N.A. Integer 0 20 N.A. 31868 MBMS Broadcast UA7.1
Parameter only applicable in PTM only Service Areas.
This p
The value shall be the requested number of seconds for which the requested
ptpAnnounceDuration SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation Announce unicast messages shall be transmitted. This parameter shall be used in s Integer 120 1000 1 300 113326 Node B Synchronisation Enhancements LR Future
the REQUEST_UNICAST_TRANSMISSION message as durationField.
This parameter defines the timeout of the announce receipt of the PTP profile, to
ptpAnnounceReceiptTimeout SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation be used for PTP (1588) messages for synchronisation.This parameter applies N.A. Integer 3 255 1 N.A. 113326 Node B Synchronisation Enhancements LR Future
only for Native IP Iub.
This parameter defines the domain of the PTP profile, to be used for PTP (1588)
ptpDomain SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation N.A. Integer 0 255 10 113326 Node B Synchronisation Enhancements LR Future
messages for synchronisation.This parameter applies only for Native IP Iub.
This parameter defines the domain of the PTP profile, to be used for PTP (1588)
ptpFallbackDomain SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Radio Synchronisation Iub Synchronisation synchronisation messages with the fallback PTP time server. This parameter N.A. Integer 0 255 1 0 113326 Node B Synchronisation Enhancements LR13.1
applies only for Native IP Iub.
This parameter defines the IP address of the fallback PTP time server, to be
ptpFallbackTimeServerIpAddress SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation used for PTP (1588) messages for synchronisation.This parameter applies only N.A. IP4Address N.A. 113326 Node B Synchronisation Enhancements LR Future
for Native IP Iub.
This represents the MAC address of the fall back time server (used when the
ptpFallBackTimeServerMacAddress SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation default time server is unreachable or not selected for any reason). This is used in N.A. DashedHexString 6 6 N.A. 113326 Node B Synchronisation Enhancements LR Future
particular in L2 architecture in the Ethernet header (destination address).
This parameter defines the logarithm of the Announce Interval of the PTP profile,
to be used for PTP (1588) messages for synchronisation.For each of the
ptpLogAnnounceInterval SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation N.A. Integer -128 127 11 113326 Node B Synchronisation Enhancements LR Future
message types Announce, Sync, Delay_Req, and Pdelay_Req, the mean time
interval between successive mes
The value shall be the logarithm, to base 2, of the requested mean period, in
seconds, between the requested Announce unicast messages. This parameter
ptpLogInterAnnouncePeriod SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation N.A. Integer -128 127 1 -1 113326 Node B Synchronisation Enhancements LR Future
shall be used in the REQUEST_UNICAST_TRANSMISSION message as
logInterMessagePeriod.
The value shall be the logarithm, to base 2, of the requested mean period, in
seconds, between the requested Sync unicast messages. This parameter shall
ptpLogInterSyncPeriod SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation N.A. Integer -6 -6 1 -6 113326 Node B Synchronisation Enhancements LR Future
be used in the REQUEST_UNICAST_TRANSMISSION message as
logInterMessagePeriod.
This parameter defines the logarithm to the base 2 of the Minimum PdelayReq
Interval of the PTP profile, to be used for PTP (1588) messages for
ptpLogMinPdelayReqInterval SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation N.A. Integer -128 127 10 113326 Node B Synchronisation Enhancements LR Future
synchronisation.For each of the message types Announce, Sync, Delay_Req, and
Pdelay_Req, the mean time interval
This parameter defines the logarithm to the base 2 of the Sync Interval of the
PTP profile, to be used for PTP (1588) messages for synchronisation.For each of
ptpLogSyncInterval SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation N.A. Integer -128 127 1 N.A. 113326 Node B Synchronisation Enhancements LR Future
the message types Announce, Sync, Delay_Req, and Pdelay_Req, the mean time
interval between succ
This parameter defines the physical network type on which the PTP protocol is
carried.
ptpNetworkType SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation It defines the expected packet Delay Propagation distribution: the use of DSL N.A. Enumerate networkWithoutDSL 113326 Node B Synchronisation Enhancements LR Future
lines adds non stationary sawtooth patterns and need specific signal processing.
External Document Page 48 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This parameter defines the domain of the PTP profile, to be used for PTP (1588)
ptpPreferredDomain SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Radio Synchronisation Iub Synchronisation synchronisation messages with the preferred PTP time server. This parameter N.A. Integer 0 255 1 0 113326 Node B Synchronisation Enhancements LR13.1
applies only for Native IP Iub.
This parameter defines the IP address of the preferred PTP time server, to be
ptpPreferredTimeServerIpAddress SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation used for PTP (1588) messages for synchronisation.This parameter applies only N.A. IP4Address N.A. 113326 Node B Synchronisation Enhancements LR Future
for Native IP Iub.
This represents the MAC address of the default time server. This is used in
ptpPreferredTimeServerMacAddress SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation particular in L2 architecture in the Ethernet header (destination address). It is a 6 N.A. DashedHexString 6 6 N.A. 113326 Node B Synchronisation Enhancements LR Future
byte field.
The value shall be the requested number of seconds for which the requested
ptpSyncDuration SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation Sync unicast messages shall be transmitted. This parameter shall be used in the s Integer 120 1000 1 300 113326 Node B Synchronisation Enhancements LR Future
REQUEST_UNICAST_TRANSMISSION message as durationField.
Enable the use of the correction field (provided by 1588 transparent clock) by the
NodeB PTP1588 client to enhance its accuracy.
ptpUseCorrectionField SynchroPTP 3 BTS <BTSEquipment>-<IpRan>-<SynchroPTP> none expert_tuning Transport Synchronisation N.A. Enumerate disabled 113326 Node B Synchronisation Enhancements LR Future
Detail: Transparent clocks measure their propagation delay for every sync packet
and fill this field in the packet, so the No
It limits the amount of puncturing that can be applied in order to minimise the
punctureLimit RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none system_restricted Radio Channels & Bearers RACH N.A. Integer 0 15 15 28016 3GPP compliant NBAP (multi-vendor) UA5.0
number of prach.
puncturingLimit UlUserService 3 RNC <RadioAccessService>-<UlUserService> none system_restricted Radio Channels & Bearers Configuration Puncturing limit for each AMR bit rate N.A. Integer 0 15 N.A. 33320 New RAB and combinations for UA06 UA6.0
<RNC>-<NodeB>-<FDDCell>-<RACH>-
qaal2EquivalentSssarSduLength DlCacTransportInfo 3 RNC none expert_tuning Radio Call Admission Control AAL2 bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<DlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
qaal2EquivalentSssarSduLength DlCacTransportInfo 3 RNC <FACH>-<CacTransportInfo>- none expert_tuning Radio Call Admission Control AAL2 bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<DlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH>-
qaal2EquivalentSssarSduLength DlCacTransportInfo 3 RNC none expert_tuning Radio Call Admission Control AAL2 bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<DlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<RACH>-
qaal2EquivalentSssarSduLength UlCacTransportInfo 3 RNC none expert_tuning Radio Call Admission Control AAL2 bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<UlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
qaal2EquivalentSssarSduLength UlCacTransportInfo 3 RNC <FACH>-<CacTransportInfo>- none expert_tuning Radio Call Admission Control AAL2 bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<UlCacTransportInfo>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH>-
qaal2EquivalentSssarSduLength UlCacTransportInfo 3 RNC none expert_tuning Radio Call Admission Control AAL2 bytes Integer 1 65668 N.A. 23479 Advanced QoS transport Framework UA6.0
<CacTransportInfo>-<UlCacTransportInfo>
Optimized performance for QCHAT (Push To
qChatDormancyTimer QChatConfClass 3 RNC <RadioAccessService>-<QChatConfClass> none customer_setting Radio PS Call management Always-on Dormancy timer s Integer 1 3600 5 108961 UA8.1
Talk)
TS 25.331 Reporting Threshold
TS 25.331
<RNC>-<CellProfiles>-<CellSelectionProfile>- hysteresis value of the serving cell.
qHyst1 CellSelectionInfoConnectedMode 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer 0 40 2 10 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode> It is used in the process of selection/reselection of cell by the UE in case the
quality measure for cell selection and re-selection is set to CPICH RSCP.
TS 25.331
<RNC>-<CellProfiles>-<CellSelectionProfile>-
hysteresis value of the serving cell.
qHyst1Fach CellSelectReselectInfoPchFach 3 RNC <CellSelectionInfoConnectedMode>- none customer_tuning Radio Mobility [Cell Selection] dB Integer 0 40 10 33819 Broadcast of SIB4 UA6.0
It is used in the process of selection/reselection of cell by the UE in case the
<CellSelectReselectInfoPchFach>
quality measure for cell selection and re-selection is set to CPICH RSCP.
TS 25.331
<RNC>-<CellProfiles>-<CellSelectionProfile>-
hysteresis value of the serving cell.
qHyst1Pch CellSelectReselectInfoPchFach 3 RNC <CellSelectionInfoConnectedMode>- none customer_tuning Radio Mobility [Cell Selection] dB Integer 0 40 10 33819 Broadcast of SIB4 UA6.0
It is used in the process of selection/reselection of cell by the UE in case the
<CellSelectReselectInfoPchFach>
quality measure for cell selection and re-selection is set to CPICH RSCP.
TS 25.331
<RNC>-<CellProfiles>-<CellSelectionProfile>- hysteresis value of the serving cell.
qHyst2 CellSelectionInfo 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer 0 40 2 10 13452 3G to 2G Cell Reselection UA2.0
<CellSelectionInfo> It is used in the process of selection/reselection of cell by the UE in case the
quality measure for cell selection and re-selection is set to CPICH Ec/No.
TS 25.331
<RNC>-<CellProfiles>-<CellSelectionProfile>- hysteresis value of the serving cell.
qHyst2 CellSelectionInfoConnectedMode 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer 0 40 2 10 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode> It is used in the process of selection/reselection of cell by the UE in case the
quality measure for cell selection and re-selection is set to CPICH Ec/No.
TS 25.331
<RNC>-<CellProfiles>-<CellSelectionProfile>-
hysteresis value of the serving cell.
qHyst2Fach CellSelectReselectInfoPchFach 3 RNC <CellSelectionInfoConnectedMode>- none customer_tuning Radio Mobility [Cell Selection] dB Integer 0 40 10 33819 Broadcast of SIB4 UA6.0
It is used in the process of selection/reselection of cell by the UE in case the
<CellSelectReselectInfoPchFach>
quality measure for cell selection and re-selection is set to CPICH Ec/No.
TS 25.331
<RNC>-<CellProfiles>-<CellSelectionProfile>-
hysteresis value of the serving cell.
qHyst2Pch CellSelectReselectInfoPchFach 3 RNC <CellSelectionInfoConnectedMode>- none customer_tuning Radio Mobility [Cell Selection] dB Integer 0 40 10 33819 Broadcast of SIB4 UA6.0
It is used in the process of selection/reselection of cell by the UE in case the
<CellSelectReselectInfoPchFach>
quality measure for cell selection and re-selection is set to CPICH Ec/No.
<RNC>-<UmtsNeighbouring>-
FddNeighCellSelectionInfoConnec
qOffset1sn 3 RNC <UmtsNeighbouringRelation>- none expert_tuning Radio Mobility [Cell Selection] dB Integer -50 50 0 33820 Broadcast of SIB12 UA6.0
tedMode
<FddNeighCellSelectionInfoConnectedMode>
<RNC>-<NodeB>-<FDDCell>-
Offset between a cell and one of its FDD neighbouring cells.
qOffset1sn GsmCellSelectionInfoConnMode 3 RNC <GsmNeighbouringCell>- none expert_tuning Radio Mobility [Cell Selection] dB Integer -50 50 0 33820 Broadcast of SIB12 UA6.0
OPTIONAL. (default value used by UE = 0).
<GsmCellSelectionInfoConnMode>
TS 25.331
<RNC>-<NodeB>-<FDDCell>-
qOffset1sn GsmNeighbouringCell 3 RNC none expert_tuning Radio Mobility [Cell Selection] Offset between a cell and one of its GSM neighbouring cells, in case the quality dB Integer -50 50 0 13452 3G to 2G Cell Reselection UA2.0
<GsmNeighbouringCell>
measure for cell selection/reselection is set to RSCP.
<RNC>-<UmtsNeighbouring>- TS 25.331.Offset between a cell and one of its Fdd neighbouring cells, in case
qOffset1sn UmtsNeighbouringRelation 3 RNC none expert_tuning Radio Mobility [Cell Selection] dB Integer -50 50 0 13452 3G to 2G Cell Reselection UA2.0
<UmtsNeighbouringRelation> the quality measure for cell selection/reselection is set to RSCP.
<RNC>-<UmtsNeighbouring>-
FddNeighCellSelectionInfoConnec
qOffset2sn 3 RNC <UmtsNeighbouringRelation>- none expert_tuning Radio Mobility [Cell Selection] dB Integer -50 50 0 33820 Broadcast of SIB12 UA6.0
tedMode
<FddNeighCellSelectionInfoConnectedMode>
TS 25.331
<RNC>-<UmtsNeighbouring>- Offset between a cell and one of its GSM
qOffset2sn UmtsNeighbouringRelation 3 RNC none expert_tuning Radio Mobility [Cell Selection] dB Integer -50 50 0 13452 3G to 2G Cell Reselection UA2.0
<UmtsNeighbouringRelation> neighbouring cells, in case the quality measure for cell selection/reselection is set
to CPICH Ec/No.
Offset (in dB) added to neighbouring cells belonging to a given MBMS Preferred
<RNC>-<UmtsNeighbouring>-
qOffsetMbms UmtsNeighbouringRelation 3 RNC none customer_tuning Radio Mobility [Cell Selection] Frequency; used for MBMS layer convergence neighbouring cell selection when N.A. Enumerate N.A. 23076 RNC 2500 UA6.0
<UmtsNeighbouringRelation>
HCS is not used in the serving cell
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
qosId FACH 0 RNC partial system_restricted Radio Channels & Bearers FACH Quality of service used to know the FACH Path Group Id. N.A. Integer 0 3 0 16717 RRC States Management UA3.0
<FACH>
qosId PCH 0 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Channels & Bearers PCH Quality of service Id used to know the PCH Path Group Id N.A. Integer 0 3 0 16717 RRC States Management UA3.0
Quality of service used to know the RACH Path Group Id.
qosId RACH 0 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> partial system_restricted Radio Channels & Bearers RACH Note : if this attribute is not present within the NodeB qosIdList, the creation shall N.A. Integer 0 3 0 24774 RACH Capacity Enhancements UA2.1
be rejected.
TS 25.331
CellSelectionInfo :
<RNC>-<CellProfiles>-<CellSelectionProfile>- >qQualMin
qQualMin CellSelectionInfo 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer -24 0 -10 18948 Inter-Frequency Cell Reselection UA3.0
<CellSelectionInfo> Meaning: Ec/No in dB
It corresponds to a minimum required quality level in the cell.
It is used in the process of selection/reselection of cell by the UE.
TS 25.331
CellSelectionInfo :
<RNC>-<CellProfiles>-<CellSelectionProfile>- >qQualMin
qQualMin CellSelectionInfoConnectedMode 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer -24 0 -16 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode> Meaning: Ec/No in dB
It corresponds to a minimum required quality level in the cell.
It is used in the process of selection/reselection of cell by the UE.
<RNC>-<UmtsNeighbouring>-
FddNeighCellSelectionInfoConnec
qQualMin 3 RNC <UmtsNeighbouringRelation>- none customer_tuning Radio Mobility [Cell Selection] dB Integer -24 0 -16 33820 Broadcast of SIB12 UA6.0
tedMode
<FddNeighCellSelectionInfoConnectedMode>
TS 25.331
>qQualMin
<RNC>-<UmtsNeighbouring>-
qQualMin UmtsNeighbouringRelation 3 RNC none customer_tuning Radio Mobility [Cell Selection] Meaning: Ec/No in dB
dB Integer -24 0 -16 13452 3G to 2G Cell Reselection UA2.0
<UmtsNeighbouringRelation>
It corresponds to a minimum required quality level in the cell.
It is used in the process of selection/reselection of cell by the UE.
External Document Page 49 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
TS 25.331
CellSelectionInfo :
<RNC>-<CellProfiles>-<CellSelectionProfile>- >qRxlevMin
qRxLevMin CellSelectionInfo 3 RNC none customer_tuning Radio Mobility [Cell Selection] dBm Integer -119 -25 2 N.A. 18948 Inter-Frequency Cell Reselection UA3.0
<CellSelectionInfo> Meaning: RSCP in dBm
It corresponds to a minimum required Rx level in the cell.
It is used in the process of selection/reselection of cell by the UE.
TS 25.331
CellSelectionInfo :
>qRxlevMin
<RNC>-<CellProfiles>-<CellSelectionProfile>-
qRxLevMin CellSelectionInfoConnectedMode 3 RNC none customer_tuning Radio Mobility [Cell Selection] Meaning: RSCP in dBm dBm Integer -119 -25 2 -115 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode>
It corresponds to a minimum required Rx level in the cell.
It is used in the process of selection/reselection of cell by the UE in connected
mode.
<RNC>-<UmtsNeighbouring>-
FddNeighCellSelectionInfoConnec
qRxLevMin 3 RNC <UmtsNeighbouringRelation>- none customer_tuning Radio Mobility [Cell Selection] dBm Integer -119 -25 -115 33820 Broadcast of SIB12 UA6.0
tedMode
<FddNeighCellSelectionInfoConnectedMode>
<RNC>-<NodeB>-<FDDCell>-
qRxLevMin GsmCellSelectionInfoConnMode 3 RNC <GsmNeighbouringCell>- none customer_tuning Radio Mobility [Cell Selection] Minimum required RX level in the cell (in dBm), corresponding to the RSCP, dBm Integer -116 -26 -115 33820 Broadcast of SIB12 UA6.0
<GsmCellSelectionInfoConnMode>
TS 25.331
>qRxlevMin
<RNC>-<NodeB>-<FDDCell>-
qRxLevMin GsmNeighbouringCell 3 RNC none customer_tuning Radio Mobility [Cell Selection] Meaning: RSCP in dBm
dBm Integer -119 -25 2 -111 13452 3G to 2G Cell Reselection UA2.0
<GsmNeighbouringCell>
It corresponds to a minimum required Rx level in the cell.
It is used in the process of selection/reselection of cell by the UE.
TS 25.331
>qRxlevMin
<RNC>-<UmtsNeighbouring>-
qRxLevMin UmtsNeighbouringRelation 3 RNC none customer_tuning Radio Mobility [Cell Selection] Meaning: RSCP in dBm
dBm Integer -119 -25 2 -115 23076 RNC 2500 UA6.0
<UmtsNeighbouringRelation>
It corresponds to a minimum required Rx level in the cell.
It is used in the process of selection/reselection of cell by the UE.
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<AccessSession>-
qualityTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether quality reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<GeographicalSession>-
qualityTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether quality reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
<RNC>-<CellProfiles>-<CellSelectionProfile>- It is used to support the configuration of UMTS intra-freq (WCDMA) measured
qualMeas CellSelectionInfo 3 RNC none customer_tuning Radio Mobility [Cell Selection] N.A. Enumerate qualMeasEcno 18948 Inter-Frequency Cell Reselection UA3.0
<CellSelectionInfo> quantity in idle mode
<RNC>-<CellProfiles>-<CellSelectionProfile>- It is used to support the configuration of UMTS intra-freq (WCDMA) measured
qualMeas CellSelectionInfoConnectedMode 3 RNC none customer_tuning Radio Mobility [Cell Selection] N.A. Enumerate qualMeasEcno 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode> quantity in connected mode
<RadioAccessService>-<QChatConfClass>- This parameter Indicates whether the request can be placed into a resource Optimized performance for QCHAT (Push To
queuingAllowed QChatArpAttribute 3 RNC none customer_setting Radio Load Management Pre-emption N.A. Boolean FAUX 108961 UA8.1
<QChatArpAttribute> allocation queue or not (i.e. Queuing of the RAB is allowed). Talk)
Maximum number of Channel Element (CE) resource allowed for R99 service
(Common channel and dedicated channels). This parameter is applicable to the
r99MaxNumberCeXcem BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio Call Admission Control CEM CE Integer 0 65504 16 0 16746 Capacity licensing UA6.0
pool of xCEM/eCEM in the NodeB.
Although Not an R99 service, Fractional DPCH-SRB over HSPA calls (PMID 29
Number of Channel Element that the BTS is allowed to allocate for R99 traffic
r99NumberCECapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_init BTS Capacity Licensing (common or dedicated channels) and Fractional DPCH-SRB over HSPA calls. N.A. Mixed 0 65520 16 infinite 16746 Capacity licensing UA6.0
Value 65535 means unlimited capacity.
r99ResourceId LocalCellGroup 0 BTS <BTSEquipment>-<LocalCellGroup> critical system_restricted Radio Design N.A. ServiceLink N.A. 27350 xCEM UA5.1
r99ResourceIdList R99ResourceExt 0 BTS <BTSEquipment>-<R99ResourceExt> critical customer_setting BTS Modem Selection This parameter gives the list of R99Resource associated to the R99ResourceExt N.A. ServiceLink N.A. 109344 bCEM SW introduction in WCDMA LR Future
Enables RAB QoS sub feature (ie Traffic Class, ARP, THP, MBR) of the Smart
rabQosSmartEdchResourceUsageActivation EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control EDCH resource usage feature for TTI selection. N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if smartEdchResourceUsageActivation is True
TS 25.331 AvailableSubChannelNumbers
Defined as the set of access slots on which mobiles are authorized to transmit
rachSubChannels RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none system_restricted Radio Channels & Bearers RACH N.A. BitString 12 12 1,11111E+11 24774 RACH Capacity Enhancements UA1
RACH.
It defines a sub-set of the total set of uplink access slots.
intelligent Multi-Carrier Traffic Allocation
radioAccessTechnology RadioAccessService 0 RNC <RadioAccessService> critical system_restricted Radio Mobility Configuration N.A. Enumerate gsm 29415 UA5.0
(iMCTA)
Number of carriers allowed for RRH and CPRI based RF modules.
In other terms: number of FDDCells that are mapped on Sectors not managed by Unique carrier licensing scheme for RRH and
radioCarrierCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_setting BTS Capacity Licensing N.A. Mixed 0 65534 infinite 112779 UA8.1
(i/x)TRM or CMSR. CPRI based RF modules
Value infinite means unlimited capacity.
radioEquipmentType RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> none customer_setting BTS RRH This parameter allows to make the difference between configurations RRH/TRDU N.A. Enumerate N.A. CR324487 TRDU UA8.1
radiusActivationMode BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Design N.A. Enumerate notActivated 33278 Node B Security UA06 Development UA6.0
rakeMode BTSEquipment 0 BTS <BTSEquipment> critical system_restricted Radio Design Layer 1 parameter. Number of fingers. N.A. Enumerate classical4 0 none UA2.1
This parameter defines the maximum interval of confidence (coefficient β)
multiplied by 1000.
<RadioAccessService>-<DlRbSetConf>- RB Rate Adaptation - If the current RB rate is below 64 kbps, an RNC static parameter defines the RB adaptation based on traffic: DL and UL
raMaxConfidenceInt DlRbRaTrafficMonitoring 3 RNC none expert_tuning Radio PS Call management N.A. Integer 0 1000 N.A. 27330 UA4.2
<DlRbRaTrafficMonitoring> throughput value of β.
with start @64kbit/s
It is only applicable for Interactive / Background PS RBs (#3, 6, 7,
This parameter defines the maximum interval of confidence (coefficient β)
multiplied by 1000.
<RadioAccessService>-<UlRbSetConf>- RB Rate Adaptation - If the current RB rate is below 64 kbps, an RNC static parameter defines the RB adaptation based on traffic: DL and UL
raMaxConfidenceInt UlRbRaTrafficMonitoring 3 RNC none expert_tuning Radio PS Call management N.A. Integer 0 1000 N.A. 27330 UA4.2
<UlRbRaTrafficMonitoring> throughput value of β.
with start @64kbit/s
It is only applicable for Interactive / Background PS RBs (#0, 3, 8
RtwpRef represent the UL thermal noise in the cell. This parameter allows a fine
tune for each cell. Range has been reduced compare to 3GPP TS 25.133
UL Load estimation for E-DCH with multiple
referenceRtwp FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Measurements Measurements dBm Float -112 -70 0,1 -106,1 33612 UA8.1
Values between -70 and -50 are exclued in order to avoid out of range values for CEMs
TargetRtwpMax = RtwpRef
This attribute determines the position of the Reference Time value used as
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- assistance data for AGPS. The value can either be sent in the first of the
referenceTimeFirstPosition 3 RNC none customer_setting Radio Location Services N.A. Boolean FAUX 116687 Reference Time Forwarding for AGPS UA8.1
gy <AGPSUeBasedLocationTechnology> sequence of RRC measurement Control Messages, or the last of the sequence of
RRC measurement Control mess
<RadioAccessService>-<UlUserService>- Power Control and Rate Matching
referenceUlRbSetConfId ReferenceUlRbSetList 3 RNC none system_restricted Radio Power Management Power Control List of UL RB Set Conf which hold reference transport channels N.A. ServiceLink N.A. 28040 UA4.2
<UlOuterLoopPowerCtrl>-<ReferenceUlRbSetList> enhancements
TS 25.331
refTfcId ComputedGainFactors 3 RNC none system_restricted Radio Power Management UL L1 indicates the identity of the TFC serving of reference, among these belonging to N.A. Integer 0 3 0 0 none UA1.0
the signalled gain factors mode,to compute these gain factors.
Indicates the identity of the TFC serving of reference, among these belonging to
<RNC>-<NodeB>-<FDDCell>-<RACH>- the signalled gain factors mode,to compute these gain factors.(one and only one
refTfcId RACHComputedGainFactors 2 RNC partial system_restricted Radio Power Management N.A. Integer 0 3 N.A. 27901 UA04.2 Parameters evolution UA4.2
<RACHComputedGainFactors> of the two fields signalledGainFactors and computedGainFactors must be
present)
<RNC>-<NodeB>-<FDDCell>-<RACH>- Indicates the identity of TFC which could serve of reference to compute the gain
refTfcId RACHSignalledGainFactors 2 RNC partial system_restricted Radio Power Management N.A. Integer 0 3 N.A. 27901 UA04.2 Parameters evolution UA4.2
<RACHSignalledGainFactors> factors when the mode COMPUTED is chosen
OPTIONAL
<RadioAccessService>-<UlUserService>-
TS 25.331
refTfcId SignalledGainFactors 3 RNC <UlTransportFormatCombinationSets>- none system_restricted Radio Power Management Power Control N.A. Integer 0 3 N.A. 0 none UA1
indicates the identity of TFC which could serve of reference to compute the gain
<SignalledGainFactors>
factors when the mode COMPUTED is chosen.
This parameter allows RNC to rejects the RRC connection request when the
rejectBelowQQualMinEnable ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none system_restricted Radio Accessibility 3G2G RRC Redirection N.A. Boolean FAUX 32580 3G/2G redirection enhancement for E911 calls LR Future
CPICH Ec/N0 reported on RACH is lower than qQualMin.
This parameter indicates the cell identity within the eNodeB. Associated to the
eNodeBs macroEnbId, it allows to uniquely identify a cell within the LTE RAN.
relativeCellIdentity LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none expert_tuning Radio Mobility LTE N.A. Integer 0 255 0 100894 UMTS to LTE Handover LR14.2
This parameter corresponds to the 8 rightmost bits of E-UTRAN Cell Identifier in
TS 36.423 9.2.14
CE decoding rate limit relative to the maximum BTS licensed capacity. This is
relativeRequestedDecodingRateLimitForCAC BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Call Admission Control HSUPA used for the CAC scheme for 2ms TTI users for iBTS in case of the maximum CE % Integer 0 100 1 95 82602 E-DCH user and cell throughput increase UA8.1
decoding rate is restricted by the BTS capacity licensing feature.
This parameter is the RAB inactivity time applied when multiple I/B RABs exist to
<RadioAccessService>-<AlwaysOnConf>- release a RAB. Upon detection of inactivity, the RNC requests the release of the
releaseTimerMpdpDchAndDch RabInactivity 3 RNC none customer_tuning Radio PS Call management MPDP s Integer 0 65535 20 34170 3 PDP contexts support in UTRAN UA6.0
<AlwaysOnTimer>-<RabInactivity> inactive RAB. A setting of 0 means that the timer is disabled. There is one
specific value f
This parameter is the RAB inactivity time applied when multiple I/B RABs exist to
<RadioAccessService>-<AlwaysOnConf>- release a RAB. Upon detection of inactivity, the RNC requests the release of the
releaseTimerMpdpHsdpaAndDch RabInactivity 3 RNC none customer_tuning Radio PS Call management MPDP s Integer 0 65535 20 34170 3 PDP contexts support in UTRAN UA6.0
<AlwaysOnTimer>-<RabInactivity> inactive RAB. A setting of 0 means that the timer is disabled. There is one
specific value f
This parameter is the RAB inactivity time applied when multiple I/B RABs exist to
<RadioAccessService>-<AlwaysOnConf>- release a RAB. Upon detection of inactivity, the RNC requests the release of the
releaseTimerMpdpHsdpaAndEdch RabInactivity 3 RNC none customer_tuning Radio PS Call management MPDP s Integer 0 65535 20 34170 3 PDP contexts support in UTRAN UA6.0
<AlwaysOnTimer>-<RabInactivity> inactive RAB. A setting of 0 means that the timer is disabled. There is one
specific value f
This parameter is used to indicate if ciphering is allowed during SRNS relocation
within the RNC for a specific CS Domain.
relocationCiphering CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none customer_setting Radio Protocols Ciphering if the value is cipheringDisabledReject the ciphering is not allowed and the N.A. Enumerate cipheringDisabledIgnore 13448 2G to 3G Handover for CS Domain UA4.0
relocation procedure is rejected
if the value is ciph
This parameter is used to indicate if ciphering is allowed during SRNS relocation
within the RNC for a PS Domain.
relocationCiphering PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none customer_setting Radio Protocols Ciphering If the value is cipheringDisabledRejected the ciphering is not allowed and the N.A. Enumerate cipheringDisabledIgnore 13448 2G to 3G Handover for CS Domain UA4.0
relocation procedure is rejected
If the value is ciphering
relocationSignallingDownlinkRadioBearerType RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Mobility [HHO][2G3G] This parameter indicates the type of SRB to allocate for 2G to 3G CS Handover N.A. Integer 0 64 3 13448 2G to 3G Handover for CS Domain UA4.0
relocationSignallingUplinkRadioBearerType RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Mobility [HHO][2G3G] This parameter indicates the type of SRB to allocate for 2G to 3G CS Handover N.A. Integer 0 66 2 13448 2G to 3G Handover for CS Domain UA4.0
<BTSEquipment>-<IpRan>-
remoteMEPId MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Identifier of the remote MEP N.A. Integer 1 8191 N.A. 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
<RadioAccessService>-<DedicatedConf>-
Indicates the minimum number of cells allowed in the E-DCH active set in order
<MeasurementConfClass>-
repActThresh1J FullEventRepCritShoMgtEvent1J 3 RNC none customer_tuning Radio Mobility [SHO] for event 1J to occur. For event 1J values 5, 6 and 7 are not applicable. N.A. Integer 2 4 2 32076 E-DCH Macro Diversity Support UA6.0
<FullEventRepCritShoMgt>-
0 means not applicable
<FullEventRepCritShoMgtEvent1J>
When an RRH is in repeater mode, this parameter indicates the list of BTS CELL
that the RRH shall repeat.This parameter is used only when RRH::rrhMode is set
repeaterCellList RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> critical customer_setting Radio Design N.A. ServiceLink N.A. 34033 Repeater mode for HSSL RRH UA6.0
to repeaterMode
Note: this parameter is not used for TRDU
Parameter Class Evolution in UA08 & UTRAN
repetitionCommonNbap BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Protocols Maximum number of repetition of common NBAP procedure. N.A. Integer 0 10 3 80685 UA8.1
model simplification
<RadioAccessService>-<DedicatedConf>-
FullEventRepCritEvent1AWithoutI <MeasurementConfClass>-
repInterval 3 RNC none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] ms Enumerate 500 27219 Intra-frequency Event-triggered Measurements UA4.2
ur <FullEventRepCritHhoMgt>-
<FullEventRepCritEvent1AWithoutIur>
<RadioAccessService>-<DedicatedConf>- Indicates the interval between two similar reporting for the amount reporting
<MeasurementConfClass>- management of the Event1A. The value O means no periodical reporting.For
repInterval1A FullEventRepCritShoMgtEvent1A 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 500 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- Calls : the new value of the parameter has to be taken into account in the life of a
<FullEventRepCritShoMgtEvent1A> call, at the next R
<RadioAccessService>-<DedicatedConf>- Indicates the interval between two similar reporting for the amount reporting
<MeasurementConfClass>- management of the Event1B. The value 0 means no periodical reportingThe new
repInterval1B FullEventRepCritShoMgtEvent1B 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 500 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- value of the parameter has to be taken into account in the life of a call, at the next
<FullEventRepCritShoMgtEvent1B> RRC Measuremen
<RadioAccessService>-<DedicatedConf>- Indicates the interval between two similar reporting for the amount reporting
<MeasurementConfClass>- management of the Event1C.The value 0 means no periodical reporting. The new
repInterval1C FullEventRepCritShoMgtEvent1C 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 500 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- value of the parameter has to be taken into account in the life of a call, at the next
<FullEventRepCritShoMgtEvent1C> RRC Measureme
<RadioAccessService>-<DedicatedConf>-
<MeasurementConfClass>- Indicates the interval between two similar reporting for the amount reporting
repInterval1J FullEventRepCritShoMgtEvent1J 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 500 32076 E-DCH Macro Diversity Support UA6.0
<FullEventRepCritShoMgt>- management of the event 1J
<FullEventRepCritShoMgtEvent1J>
<RadioAccessService>-<DedicatedConf>-
repMode DchUlBoTrafVolMeas 3 RNC <MeasurementConfClass>- none expert_tuning Radio PS Call Management RB Rate Adaptation - Buffer Traffic Volume Measurement Report Transfer Mode on the DCCH. N.A. Enumerate AM_RLC 34227 State transitioning developments UA6.0
<DchUlBoTrafVolMeas>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<AccessSession>-
reportingInterval 0 RNC partial customer_tuning Radio Call Trace reporting period for RRC dedicated measurement with CallTrace ms Enumerate 500 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<GeographicalSession>-
reportingInterval 0 RNC partial customer_tuning Radio Call Trace reporting period for RRC dedicated measurement with CallTrace ms Enumerate 500 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
TS 25.331 Reporting Threshold
This parameter is part of the Traffic Volume Measurement Reporting criteria. It is
<RadioAccessService>-<AlwaysOnConf>-
repThreshold AoOnDchParam 3 RNC none expert_tuning Radio PS Call management Always-on part of upsize algorithm.
bytes Enumerate trafficRepThrs1024 33565 UA06 Always-On developments UA6.0
<AoOnDchParam>
It is used as part of event4A configuration: threshold with which the Transport
Channel Traffic Volume is compared
This parameter is part of the Traffic Volume Measurement Reporting criteria. It is
<RadioAccessService>-<AlwaysOnConf>- part of upsize algorithm. Always On: User management with two-step
repThreshold AoOnFachParam 3 RNC none expert_tuning Radio PS Call management Always-on bytes Enumerate trafficRepThrs1024 13473 UA2.0
<AoOnFachParam> It is used as part of event4A configuration: threshold with which the Transport downsizing
Channel Traffic Volume is compared (the existing repThreshold wil
This parameter is part of the Traffic Volume Measurement Reporting criteria. It
<RadioAccessService>-<AlwaysOnConf>- will be used by the UE in PCH state to determine how to populate the TVI in the
repThreshold AoOnPchParam 3 RNC none customer_tuning Radio PS Call management Always-on bytes Enumerate trafficRepThrs1024 159246 Direct PCH to DCH Transition Enhancements LR13.3
<AoOnPchParam> Cell Update (CU) message. UE checks if the Transport Channel Traffic Volume
(TCTV) is larger t
<RadioAccessService>-<AlwaysOnConf>- E4a-based UL Upsize threshold (traffic volume) from enhanced CELL_FACH to
repThresholdECellFach AoOnEnhancedFach 3 RNC none expert_tuning Radio Power Management FACH bytes Enumerate trafficRepThrs1024 108103 Enhanced Cell Fach for DL and UL LR14.2
<AoOnEnhancedFach> CELL_DCH
For HSDPA GBR traffic, corrective factor applied to code reservation to allow for
HsxpaR99ResourcesSharingCellC <RadioAccessService>-<DedicatedConf>-
reservationFactorOnCodesForGbrTraffic 3 RNC none customer_init Radio HSDPA Resource Sharing more/less conservative reservation (PS Str is a GBR traffic ; PS I/B is a GBR % Integer 0 500 100 33694 Fair sharing of resources : HSDPA vs. DCH UA6.0
lass <HsxpaR99ResourcesSharingCellClass>
traffic if isDlPowerSelfTuningForPsIbOnHsdpaEnabled = TRUE).
Timer in multiples of T1 values (milliseconds). Used when MAC-ehs reordering
<RadioAccessService>-<DedicatedConf>-
queue is reset in CELL_FACH and CELL_PCH (FDD and 1.28 Mcps TDD only).
resetTimer CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none system_restricted Radio HSDPA FACH ms Integer 1 4 12 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
Default value is 2
<CommonPriorityQueue>
168710
TS 25.331 Timer_RST
dlRlcAmConf :
<RadioAccessService>-<RlcConfClass>- L2 improvements support (RLC & MAC-hs/e
resetTimer DlRlcAckFlexibleMode 3 RNC none system_restricted Radio Protocols >resettimer
ms Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> S/W for improved RLC)
other name: timerRst
Timer used to detect the loss of the RESET ACK PDU
TS 25.331 Timer_RST
dlRlcAmConf :
<RadioAccessService>-<RlcConfClass>-
resetTimer DlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][DL] >resettimer
ms Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode>
other name: timerRst
Timer used to detect the loss of the RESET ACK PDU
Timer in multiples of T1 values (milliseconds). Used when MAC-ehs reordering
<RadioAccessService>-<DedicatedConf>-
queue is reset in CELL_FACH and CELL_PCH (FDD and 1.28 Mcps TDD only).
resetTimer PagingPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaPagingSysInfo>- none customer_tuning Radio Accessibility Paging ms Integer 1 4 12 120428 Enhanced PCH support for Qchat LR Future
Default value is 2
<PagingPriorityQueue>
TS 25.331 Timer_RST
<RadioAccessService>-<RlcConfClass>- >resettimer
resetTimer UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation ms Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> other name: timerRst
Timer used to detect the loss of the RESET ACK PDU
TS 25.331 Timer_RST
ulRlcAmConf :
<RadioAccessService>-<RlcConfClass>-
resetTimer UlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][UL] >resettimer
ms Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcAckMode>
other name: timerRst
Timer used to detect the loss of the RESET ACK PDU
This attribute (RTO.Initial or T1-init in RFC 2960) specifies the initial timeout value
<BTSEquipment>-<IpRan>-
retransmissionTimeOutInitial SctpAssociationParams 3 BTS none system_restricted Transport IP SCTP for the retransmission timer (RTO). This value is used until a Round Trip Timer ms Integer 500 30000 1 800 27649 Native IP Iub support UA7.1
<SctpAssociationParams>
(RTT) measurement has been made for the destination transport address.
This attribute (RTO.Initial or T1-init in RFC 2960) specifies the initial timeout value
retransmissionTimeOutInitial SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none system_restricted Transport IP SCTP for the retransmission timer (RTO). This value is used until a Round Trip Timer ms Integer 1000 30000 1 N.A. 27649 Native IP Iub support UA7.1
(RTT) measurement has been made for the destination transport address.
This attribute (RTO.Max in RFC 2960) specifies the maximum permissible timeout
<BTSEquipment>-<IpRan>-
retransmissionTimeOutMax SctpAssociationParams 3 BTS none system_restricted Transport IP SCTP value for the recalculated retransmission timer (RTO). If the computed RTO value ms Integer 1000 60000 1 6000 27649 Native IP Iub support UA7.1
<SctpAssociationParams>
is more than rtxTimeOutMax, the RTO value is set to the value of rtxTimeOutMax.
This attribute (RTO.Max in RFC 2960) specifies the maximum permissible timeout
External Document
retransmissionTimeOutMax SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none system_restricted Transport IP SCTP Page 52RTO value
value for the recalculated retransmission timer (RTO). If the computed ms Integer 1000 60000 1 N.A. 27649 Native IP Iub support UA7.1 Alcatel-Lucent
is more than rtxTimeOutMax, the RTO value is set to the value of rtxTimeOutMax.
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
This attribute (RTO.Min in RFC 2960) specifies the minimum permissible timeout
<BTSEquipment>-<IpRan>-
retransmissionTimeOutMin SctpAssociationParams 3 BTS none system_restricted Transport IP SCTP value for the recalculated retransmission timer (RTO). If the computed RTO value ms Integer 100 5000 1 400 27649 Native IP Iub support UA7.1
<SctpAssociationParams>
is less than rtxTimeOutMin, the RTO value is set to the value of rtxTimeOutMin.
This attribute (RTO.Min in RFC 2960) specifies the minimum permissible timeout
retransmissionTimeOutMin SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none system_restricted Transport IP SCTP value for the recalculated retransmission timer (RTO). If the computed RTO value ms Integer 100 5000 1 N.A. 27649 Native IP Iub support UA7.1
is less than rtxTimeOutMin, the RTO value is set to the value of rtxTimeOutMin.
rfCarrierId LocalCellGroup 0 BTS <BTSEquipment>-<LocalCellGroup> critical system_restricted Radio Design N.A. ServiceLink N.A. 27350 xCEM UA5.1
This parameter defines the minimum amount of time in advance that the Anchor
rfnAdvanceOffset MbmsRadioAccessService 3 RNC <RNC>-<MbmsRadioAccessService> none system_restricted Radio Broadcast Services MBMS ms Integer 10 1280 10 40 31868 MBMS Broadcast UA7.1
Point at RNC should schedule data associated with a given RFN.
This parameter defines the Coefficient to smooth out the computation of
rfnBfnOffsetSmoothingCoefficient SynchronizedSimulcastConf 3 RNC none system_restricted Radio Broadcast Services MBMS RFN_BFN_Offset. Let’s a = RfnBfnOffsetSmoothingCoefficient, then 1/128 Integer 0 128 1 32 31868 MBMS Broadcast UA7.1
RFN_BFN_Offset(N)=a*RFN_BFN_Offset + (1-a) RFN_BFN_Offset(N-1)
Selects the measurement quantity for measured results on RACH reporting for
<RadioAccessService>-<EdchRncConf>-
rfQuantityForTtiSelection EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control TTI or SRB transport channel selection. N.A. Enumerate EcNo 120363 Smart phone EDCH resource usage. LR13.1
<EdchRncSmartphoneConf>
Meaningful only if psRabBadRadioSmartEdchResourceUsageActivation is True
rlcConfClassId DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Protocols RLC Configuration Identity of the RlcConfClass selected N.A. ServiceLink N.A. 34667 Parameter Class Evolution in UA07 UA7.0
rlcConfClassId UlRbSetConf 0 RNC <RadioAccessService>-<UlRbSetConf> critical system_restricted Radio Protocols RLC Configuration Identity of the RlcConfClass selected N.A. ServiceLink N.A. 16717 RRC States Management UA3.0
TS 25.322 Timer_Discard
<RadioAccessService>-<RlcConfClass>- For every SDU received from upper layers, the sender shall start Timer_Discard
rlcDiscard DlRlcTMode 3 RNC none system_restricted Radio Protocols [RLC][Tmode][DL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcTMode> monitoring of the transmission time of the SDU. When the transmission time
exceeds the configured value for a SDU, the Sender shall discard the SDU wi
TS 25.322 Timer_Discard
<RadioAccessService>-<RlcConfClass>- For every SDU received from upper layers, the sender shall start Timer_Discard
rlcDiscard DlRlcUMode 3 RNC none system_restricted Radio Protocols [RLC][Umode][UL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcUMode> monitoring of the transmission time of the SDU. When the transmission time
exceeds the configured value for a SDU, the Sender shall discard the SDU wi
TS 25.322 Timer_Discard
<RadioAccessService>-<RlcConfClass>- For every SDU received from upper layers, the sender shall start Timer_Discard
rlcDiscard UlRlcTMode 3 RNC none system_restricted Radio Protocols [RLC][Tmode][UL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcTMode> monitoring of the transmission time of the SDU. When the transmission time
exceeds the configured value for a SDU, the Sender shall discard the SDU wi
TS 25.322 Timer_Discard
<RadioAccessService>-<RlcConfClass>- For every SDU received from upper layers, the sender shall start Timer_Discard
rlcDiscard UlRlcUMode 3 RNC none system_restricted Radio Protocols [RLC][Umode][UL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<UlRlcUMode> monitoring of the transmission time of the SDU. When the transmission time
exceeds the configured value for a SDU, the Sender shall discard the SDU wi
Defines the amount of UE memory reserved for the addition of a new RAB
requiring RLC AM. The RLCheadroomBufferSize >= the total UE capability
rlcHeadroomBufferSize RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Protocols RLC reconfiguration Kbytes Integer 0 50 10 33598 RLC parameters reconfiguration UA6.0
memory minus the total memory in use (The total memory in use (UL PDU size *
UL Rx Window + DL PDU * DL Tx Window
for future use.
rlcPerformanceParams RlcPerformanceConf 3 RNC <RadioAccessService>-<RlcPerformanceConf> none system_restricted Radio Unused not used An list of 2 Uint32 elements, each of which is optional.
N.A. Integer 0 2147483647 N.A. 28042 Throughput KPI improvement LR Future
holes in the list are not supported.
(128,128,128,128,128,128,128,128,
rlcRetransmissionBufferInKbytes HsdpaRncConf 3 RNC <RadioAccessService>-<HsdpaRncConf> none system_restricted Radio Protocols RLC Buffer Define the RLC Retransmission Buffer size in Kbytes as a function of MBR. Kbytes Integer 1 1500 81204 Dual Cell HSDPA operation UA7.1.2
128,128,128,128,128,128,128,128)
the parameter is taken in account at next RL link setup procedure.Armed when
rlRestoreTimer RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Synchronisation Radio synchronisation s Integer 1 100 93 28036 Mobility Performance Improvements UA4.2
the initial RL is established and stopped when RlRestore received;.
The timer is armed when RlFailure occurred after established and stopped when
rlRestoreTimerAfterRlFailure RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Synchronisation Radio synchronisation RlRestore received during SHODefault value 2 seconds, which shall be no less s Enumerate 10 28036 Mobility Performance Improvements UA4.2
than t309-(tRlFailure+nOutSyncInd *10ms;
Used in conjunction with RModeMinimumAckInitialCount. After the initial number of
consecutive ACKs, subsequent ACK based on the same trigger is spread out Robust Header Compression (ROHC - RFC
rModeAckHoldOffPeriod RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC ms Integer 0 500 2 100 22845 LR Future
based on this period. Special value 0 means an ACK is sent for every packet that 3095/4815)
triggers it. (Mode:
Minimum consecutive ACK to be sent based on the same context update. Used in Robust Header Compression (ROHC - RFC
rModeMinimumAckInitialCount RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC N.A. Integer 1 10 13 22845 LR Future
conjunction with RModeAckRepetitionPeriod. (Mode: R; Profile >= 1) 3095/4815)
This parameter gives the number “unlock” receive frequency for xTRM. In other
words, it represents the number of xTRM that can be configured with 2 carriers in
rmVersion BTSEquipment 0 BTS <BTSEquipment> critical customer_tuning BTS CEM Management RX. N.A. Integer 0 2147483647 0 0 none LR Future
Possible values:
0 = no supplementary frequency is activated on xTRM (xTRM managed as iTRM
rnarProfileRefForManualActivation NodeB 3 RNC <RNC>-<NodeB> none system_restricted Radio Design N.A. ServiceLink N.A. 34191 RNAR support on RNC UA5.1
It defines the size of RNC buffer.It allows to determine the quantity to add to the
RB adaptation based on traffic: DL and UL
rncBufferSize UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation current CFN in order to precise from which CFN the frame received is considered ms Integer 0 2147483647 100 27330 UA4.2
with start @64kbit/s
as too early.
TS 23.003, V3.7.0, p.27, §12.3:
rncId RNC 0 RNC <RNC> critical system_restricted Radio Design An RNC node is uniquely identified within UTRAN by its RNC Identifier (RNC-Id). N.A. Integer 0 4095 N.A. 0 none UA1
RNC-Id together with the PLMN identifier is used to globally identify the RNC.
RNC-Id or the RNC-Id together with the PLMN-Id is used as RNC
Corresponding RNC-ID. Used to identify the eNB when SGSN uses Gn/GP
rncIdCorrespondingToEnbId CorrespondingRnc 3 RNC <RNC>-<LteNeighbour>-<CorrespondingRnc> none expert_tuning Radio Mobility LTE N.A. Integer 0 65535 N.A. 100894 UMTS to LTE Handover LR14.2
interfaces
This parameter defines whether feature 34226 RNC initiated RAB modification is
rncInitiatedRabModificationActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Channels & Bearers RAB negotiation N.A. Boolean FAUX 34226 RNC initiated RAB modification UA6.0
activated or not. 34226 is part of the global feature 97424 Parity
Indicate whether Rnc level counters configured in counterScreeningList should be
rncLevelCountersRequired RtPerfScanner 3 RNC <RNC>-<RtPerfScanner> none customer_tuning Radio Counters N.A. Boolean FAUX 25101 Real Time Rnc Counters UA7.1
activated or not.
ITU-T references: X213, E191 and Q2630.1
rncNSAPAddress RNC 0 RNC <RNC> critical customer_setting Radio Design N.A. HexString 40 40 N.A. 0 none UA2.1
RNC NSAP Address used for Iur (3GPP 25.426).
NSAP : Network Service Access Point
On SRNS Relocation the source RNC sends a transparent container to the target
SRNS Relocation UE not RNC to inform the target RNC about UE capabilities and current configuration. As
rncRelInd NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Mobility N.A. Enumerate N.A. 81204 Dual Cell HSDPA operation UA7.1.2
involved per 3GPP different ASN.1 coding is used for each release. If a target RNC does
not support a con
This parameter aims at accounting for transport network load variation for a given
<RNC>-<NodeB>-<FDDCell>-
link, by reducing the end to end delay for the slowest NodeB. The RNC must ajust
rncws CchDlTimingAdjustmentParams 2 RNC <MbmsResourceClass2>- partial system_restricted Radio Synchronisation Iub Synchronisation ms Integer 0 1279 3 31868 MBMS Broadcast UA7.1
its anticipation window for transmitting on Iub while the ToA given by the NodeB is
<CchDlTimingAdjustmentParams>
differe
It aims at accounting for transport network load variation for a given link, by
reducing the end to end delay for the slowest NodeB. The RNC must ajust its
rncWs DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation ms Integer 3 80 3 0 none UA2.1
anticipation window for transmitting on Iub while the ToA given by the NodeB is
different from the
It aims at accounting for transport network load variation for a given link, by
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>- reducing the end to end delay for the slowest NodeB. The RNC must ajust its
rncWs FACH 2 RNC partial system_restricted Radio Synchronisation Iub Synchronisation ms Integer 0 1279 10 16717 RRC States Management UA3.0
<FACH> anticipation window for transmitting on Iub while the ToA given by the NodeB is
different from the
It aims at accounting for transport network load variation for a given link, by
reducing the end to end delay for the slowest NodeB. The RNC must ajust its
rncWs PCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Synchronisation Iub Synchronisation ms Integer 0 1279 10 16717 RRC States Management UA3.0
anticipation window for transmitting on Iub while the ToA given by the NodeB is
different from the
The RNC must adjust the position of its receiving window while the slowest frame RB adaptation based on traffic: DL and UL
rncWs UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation ms Integer 0 1279 3 27330 UA4.2
is not receive at ulrncws time before the endpoint. with start @64kbit/s
rnsapDedMeasInitTimer RNC 3 RNC <RNC> none system_restricted Radio Protocols RNSAP Response Timer for setting up the dedicated measurements. ms Integer 0 300000 100 30000 0 none UA7.1
This timer indicates the maximum amount of time that is allowed for the RNC
<RNC>-<LocationServices>- (acting as DRNC) to respond to the SRNC, when the SRNC has sent an On
rnsapOnDemandRttDedMeasInitTimer CommercialLocationServices 3 RNC none expert_tuning Radio Location Services ms Integer 1000 60000 100 4000 117014 RTT support over IuR UA8.1
<CommercialLocationServices> Demand RNSAP Dedicated Measurement Initiation request message (and is
expecting the associated RNSAP Dedicate
This timer indicates the maximum amount of time that is allowed for the RNC
<RNC>-<LocationServices>- (acting as DRNC) to respond to the SRNC, when the SRNC has sent an On
rnsapOnDemandRttDedMeasInitTimer EmergencyLocationService 3 RNC none expert_tuning Radio Location Services ms Integer 1000 60000 100 4000 117014 RTT support over IuR UA8.1
<EmergencyLocationService> Demand RNSAP Dedicated Measurement Initiation request message (and is
expecting the associated RNSAP Dedicate
rnsapRlAdditionTimer RNC 3 RNC <RNC> none system_restricted Radio Protocols RNSAP Response Timer ran on the SRNC for creating addition radio links on a peerRNC. ms Integer 0 300000 100 30000 0 none UA7.1
rnsapRlDeletionTimer RNC 3 RNC <RNC> none system_restricted Radio Protocols RNSAP Response Timer ran on the SRNC for deleting radio links from a peerRNC. ms Integer 0 300000 100 30000 0 none UA7.1
rnsapRlReconfTimer RNC 3 RNC <RNC> none system_restricted Radio Protocols RNSAP Response Timer ran on the SRNC for reconfiguring radio links on the peerRNC. ms Integer 0 300000 100 30000 0 none UA7.1
Response Timer ran on the SRNC for creating the initial set of radio links on a
rnsapRlSetupTimer RNC 3 RNC <RNC> none system_restricted Radio Protocols RNSAP ms Integer 0 300000 100 30000 0 none UA7.1
peerRNC.
Robust Header Compression (ROHC - RFC
rohcActivation RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none customer_setting Radio Protocols ROHC Activation the RoHC for a given traffic type N.A. Boolean FAUX 22845 LR Future
3095/4815)
Factor to scale the GBR by apply the following formula:
Robust Header Compression (ROHC - RFC
rohcMacHsGbrScalingFactor RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC % Integer 0 100 10 22845 LR Future
RoHC Mac-hs GBR = Mac-hs GBR * (1 - RohcMacHsGbrScalingFactor) 3095/4815)
<RadioAccessService>-<OverloadInfo>- It defines the maximum number of admitted calls in case that RNC reaches Major
rrcCnxAllowedPerTmuHourMajor AutoRrcCnxFilter 3 RNC none system_restricted Radio Load Management RRC Overload Control N.A. Integer 0 17000 15000 33804 Manual Overload Control UA5.0
<RNCNodeOverloadControl>-<AutoRrcCnxFilter> overload level
<RadioAccessService>-<OverloadInfo>- It defines the maximum number of admitted calls in case that RNC reaches minor
rrcCnxAllowedPerTmuHourMinor AutoRrcCnxFilter 3 RNC none system_restricted Radio Load Management RRC Overload Control N.A. Integer 0 17000 17000 33804 Manual Overload Control UA5.0
<RNCNodeOverloadControl>-<AutoRrcCnxFilter> overload level
This is the maximum time between two Emergency call or CS speech call
attempts from the same UE (where the first attempt was already rejected with
rrcCnxRepeatTime ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none system_restricted Radio Accessibility 3G2G RRC Redirection s Integer 0 120 30 34480 3G/2G RRC Redirection based on Cell Load UA7.1
2G redirection information present) that can lead to a non redirection to the 2G
network (even if the 3G to
<RadioAccessService>-<OverloadInfo>-
rrcCnxReqRejectRate Overload 3 RNC none system_restricted Radio Load Management RRC Overload Control N.A. Integer 0 2147483647 2 33804 Manual Overload Control UA5.0
<RNCNodeOverloadControl>-<Overload>
Specifies the value of the interval of periodical report to be used in RRC
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>-
rrcGpsAuditReportingInterval 3 RNC none expert_tuning Radio Location Services Measurement Control message send of UE audit phase, if the response time in ms Enumerate 1000 27615 GPS assistance data developments UA7.1
gy <AGPSUeBasedLocationTechnology>
RANAP Location Reporting Control is equal to Dealy Tolerant..
Specifies the value of the interval of periodical report to be used in RRC
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>-
rrcGpsAuditReportingIntervalLD 3 RNC none system_restricted Radio Location Services Measurement Control message send of UE audit phase, if the response time in ms Enumerate 1000 27615 GPS assistance data developments UA7.1
gy <AGPSUeBasedLocationTechnology>
RANAP Location Reporting Control is equal to Low Delay..
Specifies the value of the interval of periodical report to be used in last RRC
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- Enhancement of UTRAN positionning for 'Low
rrcGpsDataTransferReportingInterval 3 RNC none expert_tuning Radio Location Services Measurement Control message send (i.e. Transfer phase) for delay tolerant ms Enumerate 16000 34406 UA7.1
gy <AGPSUeBasedLocationTechnology> Delay' location requests
requests.
Specifies the value of the interval of periodical report to be used in last RRC
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- Enhancement of UTRAN positionning for 'Low
rrcGpsDataTransferReportingIntervalLD 3 RNC none system_restricted Radio Location Services Measurement Control message send (i.e. Transfer phase) for Low Delay ms Enumerate 8000 34406 UA7.1
gy <AGPSUeBasedLocationTechnology> Delay' location requests
requests..
<RadioAccessService>-<DedicatedConf>- TS 25.331
3G to 2G Handover with GSM measurements
rrcGsmMeasurementFilterCoefficient RRCMeasurement 3 RNC none customer_tuning Radio Mobility Compressed Mode N.A. Enumerate 3 13447 UA2.0
<MeasurementConfClass>-<RRCMeasurement> Filter coefficient sent to the UE for GSM Carrier RSSI measurement filtering. (With and without Compressed Mode)
<RadioAccessService>-<DedicatedConf>- this parameter defines the quantity that the UE uses to determine the event
rrcLteMeasurementQuantity RRCMeasurement 3 RNC none expert_tuning Radio Mobility LTE N.A. Enumerate Rsrp 100894 UMTS to LTE Handover LR14.2
<MeasurementConfClass>-<RRCMeasurement> trigger.
rrcMeasurementPriorityManagement RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Measurements Activation of management of RRC Measurement ID inside RNC N.A. Enumerate deactivated 0 none UA7.1.2
<RNC>-<NodeB>-<FDDCell>-
rrcRedirectionConfClassId InterFreqHhoFddCell 3 RNC none customer_tuning Radio Mobility RRC Redirection Identifier of the RrcRedirectionConfClass instance N.A. ServiceLink N.A. 75069 iMCTA improvement UA7.0
<InterFreqHhoFddCell>
This parameter determines if RRC redirection should be performed and it selects
the algorithm to be applied:
<RNC>-<NodeB>-<FDDCell>-
rrcRedirectionType InterFreqHhoFddCell 3 RNC none customer_setting Radio Mobility RRC Redirection - none: Inter-frequency RRC redirection disabled N.A. Enumerate none 75069 iMCTA improvement UA7.0
<InterFreqHhoFddCell>
- capaOnly: Traffic segmentation to R99, HSDPA and HSUPA layer based on UE
release and capability
If the originating cell and one or more twin cells belong to the FA type for RRC
<RNC>-<NodeB>-<FDDCell>- redirection as determined by parameter rrcRedirectionType then the call is kept
rrcRedirectOrigCellColourThreshold InterFreqHhoFddCell 3 RNC none customer_tuning Radio Mobility RRC Redirection N.A. Enumerate Green 75069 iMCTA improvement UA7.0
<InterFreqHhoFddCell> on the originating cell if its cell colour is below the configured
rrcRedirectOrigCellColourTh
This threshold applies to originating HSPA cell and used by iMCRA as a condition
<RNC>-<NodeB>-<FDDCell>-
rrcRedirectOrigHspaCellLoadThreshold InterFreqHhoFddCell 3 RNC none expert_tuning Radio Call Admission Control RRC Redirection to trigger HSPA cell load balancing: The HSPA cell load has to be higher or equal N.A. Enumerate Yellow 81213 Load balancing between HSPA carriers UA7.1.2
<InterFreqHhoFddCell>
than this threshold
Threshold on CPICH Ec/No used in the decision process of RRC Connection CS
rrcReestablishCSThreshold RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Retainability RRC Re-establishment Re-establishment. Re-establishment for CS is not attempted when received dB Float -24 0 0,1 -24 34290 RRC connection re-establishment for CS UA6.0
CPICH Ec/No is below this threshold
Indicates if the RNC is allowed to use RRC re-establishment to manage re- Multi-Service RAB call drop reduction for
rrcReestablishForSingleOrMultiServiceMode RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Retainability RRC Re-establishment N.A. Enumerate CsAndPsDisabled 119418 UA8.1
establishment for CS+PS RAB combinations. Smartphone
Cpich Ec/No threshold used in the decision process for RrcConnection
rrcReestablishPSThreshold RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Retainability RRC Re-establishment dB Float -24 0 0,1 -24 34290 RRC connection re-establishment for CS UA6.0
reestablishment
This parameter is a guard timer on critical call failures. RRC re-establishment for
rrcReestCSMaxAllowedTimer RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Retainability RRC Re-establishment CS procedure is attempted if reception of a Cell Update message otherwise the N.A. Enumerate t314_8S 34290 RRC connection re-establishment for CS UA6.0
call is released.
This parameter is a guard timer on critical call failures. RRC re-establishment for
rrcReestPSMaxAllowedTimer RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Retainability RRC Re-establishment PS procedure is attempted if reception of a Cell Update message otherwise the N.A. Enumerate t315_180S 34290 RRC connection re-establishment for CS UA6.0
call is released
The parameter defines the number of RRC CONNECTION REQUEST
(Establishment cause: Registration) messages per cell acceptable for processing
rrcRegistrationMessagesObservationThreshold FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Accessibility Registration N.A. Integer 0 60000 1 300 98610 RRC Connection Attempts Filtering LR14.2
at RNC within a time observation interval defined by parameter
observationIntervalforRRCRegistrationMessages.
The parameter defines the number of RRC CONNECTION REQUEST
(Establishment cause: Registration) messages per cell acceptable for processing
rrcRegistrationMessagesObservationThreshold FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Accessibility RRC Reject N.A. Integer 0 60000 1 300 98610 RRC Connection Attempts Filtering LR14.2
at RNC within a time observation interval defined by parameter
observationIntervalforRRCRegistrationMessages.
This parameter is used to in the solution where an RRH 4FA would be modelized
by 2 REMOTE RADIO HEAD object. In this solution, the 2 REMOTE RADIO
rrhGroupId RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> critical customer_setting Radio Design HEAD objects with the same rrhGroupId would represent the same physical RRH N.A. Integer 0 5 N.A. 34033 Repeater mode for HSSL RRH UA6.0
4FA RRH.
Note: this parameter is
This parameter indicates how the RRH is used.Possible values are:0:
rrhMode RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> critical customer_setting Radio Design N.A. Enumerate sectorMode 34033 Repeater mode for HSSL RRH UA6.0
sectorMode1: repeaterMode. Note: this parameter is not used for TRDU.
Number of frequencies that are software-allowed on this RRH or TRDU. Possible
values 0: means no software locking of Number Frequency for this RRH or TRDU,
rrhNumberFrequency RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> critical customer_setting Radio Design N.A. Integer 0 4 1 31784 6 sectors mixed configuration step1 UA5.0
1: means that RRH or TRDU can only manage 1 frequency, 2: means that RRH
or TRDU can manage 2 fr
Maximum Power that is allowed to be used for the RRH, TRDU and MC-TRX
rrhPowerCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_init BTS Capacity Licensing W Mixed 0 65534 infinite 16746 Capacity licensing UA6.0
managed by the BTS.
Indicates that UE is in good/bad radio conditions for TTI selection based on
rscpNRiseThresholdForTtiSelection EdchResource 3 RNC <RNC>-<NodeB>-<FDDCell>-<EdchResource> none expert_tuning Radio HSUPA Congestion Control reported RSCP - estimated UL noise rise of the cell. dBm Float -115.0 -25.0 0.1 -100.0 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if psRabBadRadioSmartEdchResourceUsageActivation is True
This parameter is used to select the final set of cells for which the pCPICH power
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
rscpThreshold PcpichPowerAutoAdjConfClass 3 RNC none expert_tuning Radio Power Management [Common Channels] should be decreased. A cell having a percentage of RSCP measurements greater % Float 0.0 99.9 0.1 5.0 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
than this threshold cannot be selected.
Threshold for RSCP measurement applicable while performing AO Upsize state
rscpThresholdForAoUpsize FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility [HHO][iMCTA] dBm Integer -120 -25 1 -90 131682 Measurement Assisted BHO for Always On LR Future
transition on a different frequency
rssiHighAlarmThreshold BTSCell 3 BTS <BTSEquipment>-<BTSCell> none customer_setting Radio HSUPA UL Radio Load dBm Float -150 -50 0,1 -90 34134 High RSSI Node-B alarm UA6.0
Provides the IP address of the computer hosting the Real Time Call Trace
rtctAnalyzerIpAddress AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial customer_setting Transport IP N.A. IP4Address N.A. 34277 Real Time Call Trace UA7.0
Analyzer tool
This parameter is added to the parameter RTWPmax given by RNC to obtain the
rtwpMargin BTSCell 3 BTS <BTSEquipment>-<BTSCell> none expert_tuning Radio HSUPA Power Control maximum RTWP limit for which the eDCH system can work properly without any dB Float 0,5 2 0,5 2 29819 HSDPA Performance Enhancement UA5.0
major problem
This parameter is used to activate the UL CAC on non-EDCH traffic at BTS
rtwpMaxCellLoadCacActivation BTSCell 3 BTS <BTSEquipment>-<BTSCell> none customer_setting Radio Call Admission Control UL Radio Load N.A. Boolean FAUX 27745 UL Load Estimation UA5.0
based on the RTWP
RTWP load used to perform UL CAC for all traffic except EDCH based on the
RTWP. This parameter is used only if rtwpMaxCellLoadCacActivation is set to
rtwpMaxCellLoadNonEdch BTSCell 3 BTS <BTSEquipment>-<BTSCell> none expert_tuning Radio Call Admission Control UL Radio Load % Integer 0 100 50 27745 UL Load Estimation UA5.0
TRUE. In this case, the CAC will accept “non-eDCH” calls if:
[1-( (rtwpReference(Watt)/rtwpMeasured(Watt
Reference of RTWP when the BTS does not receive any radio signal for this cell.
rtwpReference BTSCell 3 BTS <BTSEquipment>-<BTSCell> none system_restricted Radio Call Admission Control UL Radio Load If the parameter isRtwpReferenceSelfLearning is set to TRUE, this parameter is dBm Float -115 -50 0,1 -106,1 27745 UL Load Estimation UA5.0
only used to initiate the RTWP self learning feature.
NbapCommonMeasConfigForCall <RNC>-<ObjectTrace>-<CellSession>- RSSI reporting interval
rtwpReportPeriodicity 0 RNC partial system_restricted Radio Call Trace ms Integer 500 60000 500 2000 34583 UA07 Call Trace Development UA7.0
Trace <NbapCommonMeasConfigForCallTrace> In NBAP, it deals in fact with receivedTotalWideBandPower (3GPP TS 25.215).
NbapCommonMeasConfigForCall <RNC>-<ObjectTrace>-<CellSession>- Indicate if RSSI is present in the NBAP common measurements for Call Trace.
rtwpRequired 0 RNC partial system_restricted Radio Call Trace N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <NbapCommonMeasConfigForCallTrace> In NBAP, it deals in fact with receivedTotalWideBandPower (3GPP TS 25.215).
Value removed to RTWP threshold to lauch Ul interference computation. CS fallback enhancement from LTE to
rtwpThresholdHigh RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none customer_tuning Radio Measurements RTWP dBm Integer 1 10 13 115109 UA8.1
Significant when isUlInterferenceUpdatedInSib7 = TRUE. UMTS:enhanced Redirection
Value added to RTWP threshold to lauch Ul interference computation. Significant CS fallback enhancement from LTE to
rtwpThresholdLow RACH 3 RNC <RNC>-<NodeB>-<FDDCell>-<RACH> none customer_tuning Radio Measurements RTWP dBm Integer 1 10 12 115109 UA8.1
when isUlInterferenceUpdatedInSib7 = TRUE. UMTS:enhanced Redirection
This parameter is relative to the maximum time for which the eDCH system is
rtwpTimeDetection BTSCell 3 BTS <BTSEquipment>-<BTSCell> none expert_tuning Radio HSUPA Power Control ms Integer 100 400 100 400 29819 HSDPA Performance Enhancement UA5.0
authorized to work above the RTWP limit defined by RTWPmax + RTWPmargin
In case of RRH repeater mode, the capacity and coverage of RRH and NodeB is
limited according to this parameter.This parameter limits the contribution of the
rxAttenuation RemoteRadioHead 3 BTS <BTSEquipment>-<RemoteRadioHead> none expert_tuning Radio Design dB Float 0 10 0,1 6 34033 Repeater mode for HSSL RRH UA6.0
repeated RRH when summing its contribution (RX sample) to the Cell.
Note: This parameter is onl
This parameter indicates how the BTS is cabled to the antenna for reception
path:
rxCabling AntennaAccess 0 BTS <BTSEquipment>-<AntennaAccess> critical expert_tuning Radio Design mainInputOnly = in case Main only connected for the antenna, the received signal N.A. Enumerate mainAndDiversityInput 0 none LR Future
is treated only by the MAIN, L1 treats only the samples from Main reception.
diversityInputO
rxCellDelayVariationTolerance RouteCes 0 BTS <BTSEquipment>-<RouteCes> critical expert_tuning Transport ATM Cell Delay variation Tolerance for the VCCid micros Integer 100 31000 100 2000 25069 CES support in Node-B/iCCM LR Future
This parameter is reserved to activate/desactivate L1 algorithm.
Bit0:
0: Activate the common Layer1 UL enhancement algorithm (MAP CIRE
rxDemodulation BTSEquipment 0 BTS <BTSEquipment> critical system_restricted Radio Design DOPPLER)
N.A. Integer 0 2147483647 0 0 none UA4.2
1: do not activate the common activate Layer1 UL enhancement algorithm
Bit 1:
0: H-BBU detection
This parameter defines the Rx Diversity Imbalance Threshold used for receive
rxDiversityImbalancedThreshold AntennaAccess 3 BTS <BTSEquipment>-<AntennaAccess> none system_restricted Radio Measurements RTWP signal strength indicator diversity imbalance tests. dB Float 1 20 0,1 N.A. 96374 Parameter and Alarm Mapping Gaps UA7.1.2
The absence of the parameter deactivates the feature.
This parameter is only used for RRH in US market.
When parameter is set to normalMode, antennas are connected to the primary
rxMode RemoteRadioHead 0 BTS <BTSEquipment>-<RemoteRadioHead> none expert_tuning BTS RRH port of RRH N.A. Enumerate normalMode 0 none UA8.1
When parameter is set to bypassMode, antennas are connected to primary port
of RRH for TX and to auxiliary port of the
This parameter indicates how often the Rx VSWR test is peformed. Value 0
rxVSWRPeriodicity BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Measurements RTWP means that the RX VSWR test is not performed. The activation of RX VSWR test min Integer 0 1440 12 96374 Parameter and Alarm Mapping Gaps UA7.1.2
also requires that the parameter rxVSWRThreshold be present
This parameter indicates the Rx VSWR Threshold used for receive RF tests.
rxVSWRThreshold BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Measurements RTWP dB Float 0,5 15 0,1 N.A. 96374 Parameter and Alarm Mapping Gaps UA7.1.2
The absence of the parameter deactivates the feature.
External Document IuBC service area code used for CBS.
Page 54 Alcatel-Lucent
sac CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> partial customer_init Radio Broadcast Services CBS N.A. Integer 0 65535 N.A. 21092 Cell Broadcast service UA7.0
Fixed length (2 bytes) code representing a service area within a location area
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Sampling Interval for power and load measurements used in automatic Carrier
samplingRateForAutoCarrierSwitchOffMeasures RNC 3 RNC <RNC> none system_restricted Radio Power Management SwitchOff min Integer 1 15 3 34396 Automatic Carrier Switchoff UA7.1
Switch Off algorithm
This attribute is used when the SAS centric mode operation is being used. In this
CallTracePeriodicLocationService <RNC>-<LocationServices>- case, when a Call Trace initiated position request is made, this attribute is used
sasCentricClientType 3 RNC none customer_setting Transport IP Enumerate undefined 120416 Iu-PC interface enhancement LR13.1
s <CallTracePeriodicLocationServices> within the PCAP Position Initiation Request sent to the SAS. The value of
undefined indica
This attribute is used when the SAS centric mode operation is being used. In this
CallTracePeriodicLocationService <RNC>-<LocationServices>- case, when a Call Trace initiated position request is made, this attribute is used
sasCentricHorizontalAccuracyCode 3 RNC none customer_setting Transport IP Integer -1 127 1 19 120416 Iu-PC interface enhancement LR13.1
s <CallTracePeriodicLocationServices> within the PCAP Position Initiation Request sent to the SAS. The values of 0-127
are valid
This attribute is used when the SAS centric mode operation is being used. In this
CallTracePeriodicLocationService <RNC>-<LocationServices>- case, when a Call Trace initiated position request is made, this attribute is used
sasCentricIsVelocityRequested 3 RNC none customer_setting Transport IP Boolean false 120416 Iu-PC interface enhancement LR13.1
s <CallTracePeriodicLocationServices> within the PCAP Position Initiation Request sent to the SAS.
(true indicates velocity is
This timer Is a guard timer used when operating in SAS centric mode to ensure
<RNC>-<LocationServices>- that a RANAP Location Reporting Control received from the CN is answered by
sasCentricModeCnMaxResponseTime SasCentricModeService 3 RNC none expert_tuning Transport IP s Integer 1 140 1 30 120416 Iu-PC interface enhancement LR13.1
<SasCentricModeService> the RNC with a RANAP Location Report message. The predicted behaviour is
that the RANAP Location Repo
This attribute is used when the SAS centric mode operation is being used.
CallTracePeriodicLocationService <RNC>-<LocationServices>- In this case, when a Call Trace initiated position request is made, this attribute is
sasCentricVerticalAccuracyCode 3 RNC none customer_setting Transport IP N.A. Integer -1 127 1 127 120416 Iu-PC interface enhancement LR13.1
s <CallTracePeriodicLocationServices> used within the PCAP Position Initiation Request sent to the SAS.
The values of 0-127 are val
The GPS receiver will attempt to track satellites for which the elevation angle is
Additional GPS receiver support for Node-B
satelliteMaskAngle SatelliteData 3 BTS <BTSEquipment>-<SatelliteData> none customer_setting Radio Unused greater than the satellite mask angle. This parameter allows the user to control deg Integer 0 89 10 98839 Cancelled
Syncronization
the elevation angle that was used for this decision.
Additional GPS receiver support for Node-B
satelliteNetwork SatelliteData 2 BTS <BTSEquipment>-<SatelliteData> partial customer_setting Radio Unused Indicates the satellite network in use N.A. Enumerate gps 98839 Cancelled
Syncronization
Additional GPS receiver support for Node-B
satelliteReceiverType SatelliteData 2 BTS <BTSEquipment>-<SatelliteData> partial customer_setting Radio Unused Indicate the type of the satellite receiver hardware module N.A. Enumerate N.A. 98839 Cancelled
Syncronization
The pararmeter defines the scale down factor used to derive the filtering window
from observation window (given by parameter
scaleFactorforRrcRegistrationFiltering RRCFiltering 3 RNC <RadioAccessService>-<RRCFiltering> none expert_tuning Radio Accessibility Registration N.A. Integer 1 1800 1 10 98610 RRC Connection Attempts Filtering LR14.2
observationIntervalforRRCRegistrationMessages) and to derive RRC registration
filtering threshold from observed RRC registration t
The pararmeter defines the scale down factor used to derive the filtering window
from observation window (given by parameter
scaleFactorforRrcRegistrationFiltering RRCFiltering 3 RNC <RadioAccessService>-<RRCFiltering> none expert_tuning Radio Accessibility RRC Reject N.A. Integer 1 1800 1 10 98610 RRC Connection Attempts Filtering LR14.2
observationIntervalforRRCRegistrationMessages) and to derive RRC registration
filtering threshold from observed RRC registration t
Pointer on the SccpchClass instance chosen.
0 means FACH SRBs only configuration selected
sccpchClassId SCCPCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH> partial expert_tuning Radio Channels & Bearers SCCPCH 1 means FACH SRB+ FACH TRB+ PCH configuration selected.
N.A. ServiceLink N.A. 16717 RRC States Management UA3.0
Instance Number 2, which was defined as below, is finally not supported.
2 means FACH SRB + FACH DTCH
TS 25.433
sccpchDlScramblingCode SCCPCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH> partial system_restricted Radio Channels & Bearers SCCPCH Downlink scrambling code used by this channel (0.. 15).
N.A. Integer 0 15 0 30804 Multiple S-CCPCH channel support UA5.0
0 = primary scrambling code of the cell
<RNC>-<NodeB>-<FDDCell>- This parameter defines the gap in number of 256 chips between two consecutive
sccpchGap MbmsResourceClass2 2 RNC partial system_restricted Radio Broadcast Services MBMS chips Integer 0 38144 256 2560 31868 MBMS Broadcast UA7.1
<MbmsResourceClass2> S-CCPCH for MTCH
The Secondary CCPCH offset is defined as the time offset towards the Primary
<RNC>-<NodeB>-<FDDCell>- CCPCH in the cell. The offset is a multiple of 256 chips (cf TS 25.433 , TS
sccpchOffset MbmsResourceClass2 2 RNC partial system_restricted Radio Broadcast Services MBMS chips Integer 0 38144 256 17920 31868 MBMS Broadcast UA7.1
<MbmsResourceClass2> 25211): Secondary CCPCH offset = Tk * 256 chips, where Tk is an integer with
range [0..149]
The Secondary CCPCH offset is defined as the time offset towards the Primary
CCPCH in the cell.
sccpchOffset SCCPCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH> partial system_restricted Radio Broadcast Services MBMS The offset is a multiple of 256 chips (cf TS 25.433 , TS 25211):
chips Integer 0 38144 256 0 30804 Multiple S-CCPCH channel support UA5.0
Secondary CCPCH offset = Tk * 256 chips, where Tk is an integer with range
[0..149]
sccpchPowerRelativeToPcpich MbmsUserService 3 RNC none system_restricted Radio Broadcast Services MBMS This parameter defines the SCCPCH power for MTCH, relative to CPICH. dB Float -35 15 0,1 1,8 31868 MBMS Broadcast UA7.1
Secondary CCPCH power relative to Pcpich power.
Secondary CCPCH power relative to P-CPICH power configured in a cell.
sccpchPowerRelativeToPcpich SCCPCH 3 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH> none customer_tuning Radio Power Management CCPCH dB Float -35 15 0,1 -1 30804 Multiple S-CCPCH channel support UA5.0
The S-CCPCH channel carries two different common transport channels, which
are multiplexed. This doesn’t imply necessarily that the S-C
sccpchSlotFormat SccpchClass 0 RNC <RadioAccessService>-<SccpchClass> critical system_restricted Radio Channels & Bearers SCCPCH Secondary CCPCH slot format N.A. Integer 0 17 N.A. 16717 RRC States Management UA3.0
ITU Q.704
The Destination Point Code indicates the destination point of the messages for
sccpDestinationPointCode CsCoreNetworkAccess 0 RNC <RNC>-<CsCoreNetworkAccess> partial customer_setting Radio Protocols the Signalling System 7 (SS7).
N.A. Integer 1 16777215 N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
All Destination Point Code must be unique per IUCS,
ITU Q.704
The Destination Point Code indicates the destination point of the messages for
sccpDestinationPointCode NeighbouringRNC 0 RNC <RNC>-<NeighbouringRNC> partial customer_setting Radio Protocols the Signalling System 7 (SS7).
N.A. Integer 1 16777215 N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
All Destination Point Code must be unique per IUR,
ITU Q.704
The Destination Point Code indicates the destination point of the messages for
sccpDestinationPointCode PsCoreNetworkAccess 0 RNC <RNC>-<PsCoreNetworkAccess> partial customer_setting Radio Protocols the Signalling System 7 (SS7).
N.A. Integer 1 16777215 N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
All Destination Point Code must be unique per IUPS,
ITU Q.704
The network indicator provides for discrimination between international and
sccpNetworkIndicator CsCoreNetworkAccess 0 RNC <RNC>-<CsCoreNetworkAccess> partial customer_setting Radio Protocols national messages. It can also be used, for example, for the discrimination N.A. Enumerate N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
between functionally two national signalling networks, each having different
routing label
ITU Q.704
The network indicator provides for discrimination between international and
sccpNetworkIndicator NeighbouringRNC 0 RNC <RNC>-<NeighbouringRNC> partial customer_setting Radio Protocols national messages. It can also be used, for example, for the discrimination N.A. Enumerate N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
between functionally two national signalling networks, each having different
routing label
ITU Q.704
The network indicator provides for discrimination between international and
sccpNetworkIndicator PsCoreNetworkAccess 0 RNC <RNC>-<PsCoreNetworkAccess> partial customer_setting Radio Protocols national messages. It can also be used, for example, for the discrimination N.A. Enumerate N.A. 26521 RNC supports QAAL2 Alternate Routing UA4.2
between functionally two national signalling networks, each having different
routing label
schedulePeriodCount CbsResource 2 RNC <RNC>-<NodeB>-<FDDCell>-<CbsResource> none system_restricted Radio Broadcast Services CBS Number of CTCH block sets (CTCH-BS) of the DRX schedule period. N.A. Integer 0 255 1 250 75068 CBS improvement on dynamic scheduling LR Future
<BTSEquipment>-<BTSCell>-<EdchConf>-
schedulingPriorityLevel EdchServiceParameterSet 3 BTS none customer_tuning Radio HSUPA N.A. Integer 0 15 N.A. 30742 MBR handling in the HSUPA Scheduler UA7.1.2
<EdchServiceParameterSet>
S-CPICH Power relative to P-CPICH Power to be applied when there is no UE in
scpichPowerRelativeToPcpich SCPICH 3 RNC <RNC>-<NodeB>-<FDDCell>-<SCPICH> none system_restricted Radio Power Management Common Channels dB Float -35 15 0,1 -35 83984 2*2 MIMO UA8.1
the cell in MIMO mode.
scpichPowerRelativeToPcpichMimo HsdpaResource 3 RNC <RNC>-<NodeB>-<FDDCell>-<HsdpaResource> none system_restricted Radio Power Management Common Channels S-CPICH Power relative to P-CPICH Power to be applied in MIMO mode. dB Integer -6 0 10 83984 2*2 MIMO UA8.1
This attribute defines the DSCP (DiffServ Code Point) of an IP transport bearer
for this SCTP association. This qualifies the quality of service according to RFC
sctpDscp SctpParams 3 RNC <RNC>-<NodeB>-<SctpParams> none expert_tuning Transport IP N.A. Enumerate N.A. 27649 Native IP Iub support UA7.1
2474.
Note: Nodes B in the same domain must use the same DSCP.
indicate what UE version is available in SCUDIF feature provided by the specific SCUDIF with 3subflow RAB and the first
scudifCapableUeVersion RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Speech Call Management SCUDIF N.A. Enumerate Rel6 81432 UA7.1.2
service provider VTcall with 1subflow
<RadioAccessService>-<RlcConfClass>-
sduRetransmitAfterPduSizeChange DlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][DL] N.A. Enumerate N.A. 33598 RLC parameters reconfiguration UA6.0
<DlRlcAckMode>
<RadioAccessService>-<RlcConfClass>-
sduRetransmitAfterPduSizeChange UlRlcAckMode 3 RNC none system_restricted Radio Protocols [RLC][Ack mode][UL] N.A. Enumerate N.A. 33598 RLC parameters reconfiguration UA6.0
<UlRlcAckMode>
Password to be used to access the BTS by the security administrator, this SSH/sFTP support in the iBTS and IP address
secAdminPassword BTSEquipment 3 BTS <BTSEquipment> none customer_setting Transport N.A. String 0 28 $NULLSTRING$ 111416 LR Future
password is encrypted. source filtering on Node B & RNC
secondaryLtePlmnIdList LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none customer_setting Radio Mobility LTE List of up to 3 secondary Lte Plmn (Plmns broadcast in the cells of the eNB) N.A. ServiceLink N.A. 100894 UMTS to LTE Handover LR14.2
secondaryRadiusServerIpV4Address RadiusParameters 3 BTS <BTSEquipment>-<RadiusParameters> none customer_init Transport IP The IP V4 address of the secondary radius server N.A. IP4Address N.A. 33278 Node B Security UA06 Development UA8.1
secondaryRadiusServerIpV6Address RadiusParameters 3 BTS <BTSEquipment>-<RadiusParameters> none customer_init Transport IP The IP V6 address of the secondary radius server N.A. IP6Address N.A. 33278 Node B Security UA06 Development UA8.1
secondaryRadiusServerSharedSecretKey RadiusParameters 3 BTS <BTSEquipment>-<RadiusParameters> none customer_setting Radio Design N.A. HexString 1 288 N.A. 33278 Node B Security UA06 Development UA6.0
SecurityControl is a parameter allowing the inter-working between MSC and RNC
and controls integrity protection and partially ciphering.
securityControl CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none customer_setting Radio Protocols Ciphering - securityDisabledReject: RNC rejects each RANAP SECURITY MODE N.A. Enumerate integrityActivated 18855 UTRAN Sharing UA3.1
COMMAND (including ciphering)
- securityDisabledI
SecurityControl is a parameter allowing the inter-working between MSC and RNC
and controls integrity protection and partially ciphering.
securityControl PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none customer_setting Radio Protocols Ciphering - securityDisabledReject: RNC rejects each RANAP SECURITY MODE N.A. Enumerate integrityActivated 18855 UTRAN Sharing UA3.1
COMMAND (including ciphering)
- securityDisabledI
<RadioAccessService>-<RlcConfClass>- TS 25.331 Segmentation indication
segmentationInd DlRlcTMode 3 RNC none system_restricted Radio Protocols [RLC][Tmode][DL] N.A. Boolean FAUX 16717 RRC States Management UA3.0
<DlRlcTMode> TRUE indicates that segmentation of RLC SDU is performed.
<RadioAccessService>-<RlcConfClass>- TS 25.331 Segmentation indication
segmentationInd UlRlcTMode 3 RNC none system_restricted Radio Protocols [RLC][Tmode][UL] N.A. Boolean FAUX 16717 RRC States Management UA3.0
<UlRlcTMode> TRUE indicates that segmentation of RLC SDU is performed.
TS23.003 (release 1999), V3.7.0, § 4.6, p. 15:
serviceAreaCode FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Design The Service Area Code (SAC) is a fixed length code (of 2 octets) identifying a N.A. Integer 0 65535 N.A. 0 none UA1
service area within a location area and it can be coded using a full hexadecimal
representation. A service area consists of on
This parameter defines the 3GPP TS 23.003 MBMS Service Area Identity
An MBMS SAI identifies a group of cells within a PLMN.
serviceAreaIdentity MbmsServiceArea 3 RNC none system_restricted Radio Broadcast Services MBMS A cell is addressable by one up to 8 MBMS SAIs N.A. Integer 1 65535 N.A. 31868 MBMS Broadcast UA7.1
Value 0 has a special meaning: it denotes the whole PLMN. It indicate to a
receivin
<BTSEquipment>-<BTSCell>-<EdchConf>-
serviceBFactor EdchServiceParameterSet 3 BTS none expert_tuning Radio HSUPA N.A. Integer 1 30 N.A. 30742 MBR handling in the HSUPA Scheduler UA7.1.2
<EdchServiceParameterSet>
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceBFactor HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler N.A. Integer 1 30 7 27350 xCEM UA5.1
<HsdschServiceParameterSet>
ATM Forum: af-tm-0056.000 April 1996 Traffic Management Specification
serviceCategory VCC 0 BTS <BTSEquipment>-<VCC> none customer_tuning Transport ATM
N.A. Enumerate N.A. 0 none UA1.0
It defines the ATM Service Category of the ATM Profile considered.
Indicates the activation/deactivation of User-Initiated Service Change UDI/RDI (NI-
serviceChangeRncInitiated RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management SCUDIF N.A. Boolean FAUX 29416 Switching between Video and Speech UA6.0
SCUDIF)
AIf ServiceChangeUserInitiated is set to FALSE, the SCUDIF feature is not SCUDIF with 3subflow RAB and the first
serviceChangeUserInitiated RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Speech Call Management SCUDIF N.A. Boolean FAUX 81432 UA7.1.2
enabled regardless if ServiceChangeRncInitiated is set to TRUE VTcall with 1subflow
<BTSEquipment>-<BTSCell>-<EdchConf>-
serviceFilterFactor EdchServiceParameterSet 3 BTS none expert_tuning Radio HSUPA This is the average factor for the throughput of EDCH users. N.A. Integer 1 11 5 30742 MBR handling in the HSUPA Scheduler UA7.1.2
<EdchServiceParameterSet>
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceFilterFactor HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler N.A. Integer 1 11 8 27350 xCEM UA5.1
<HsdschServiceParameterSet>
External Document Page 55 Alcatel-Lucent
serviceGroupId NodeB 0 RNC <RNC>-<NodeB> partial system_restricted Radio Design Id of the Service Group to which this Nodeb MO has been assigned N.A. Integer 0 52 N.A. 28016 3GPP compliant NBAP (multi-vendor) UA5.0
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
<BTSEquipment>-<BTSCell>-<EdchConf>- This is the rate difference r_high for the maximum rate calculation for EDCH GBR
serviceHighRate EdchServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Kbits/s Integer 0 10000 5000 30742 MBR handling in the HSUPA Scheduler UA7.1.2
<EdchServiceParameterSet> users
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceHighRate HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler Kbits/s Integer 0 10000 1000 27350 xCEM UA5.1
<HsdschServiceParameterSet>
Enable/disable the CN to define the HO strategy regarding the GSM access on a intelligent Multi-Carrier Traffic Allocation
serviceHoRanapIeEnable Imcta 3 RNC <RadioAccessService>-<Imcta> none customer_setting Radio Mobility [HHO][iMCTA] N.A. Boolean FAUX 29415 UA5.0
per RAB basis (iMCTA)
<BTSEquipment>-<BTSCell>-<EdchConf>-
serviceKFactor EdchServiceParameterSet 3 BTS none expert_tuning Radio HSUPA Scheduler N.A. Integer 1 30 N.A. 33327 MAC-e Scheduler Evolutions UA6.0
<EdchServiceParameterSet>
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceKFactor HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler N.A. Integer 1 30 7 27350 xCEM UA5.1
<HsdschServiceParameterSet>
<BTSEquipment>-<BTSCell>-<EdchConf>- This is the rate difference r_low for the minimum rate calculation for EDCH GBR
serviceLowRate EdchServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Kbits/s Integer 0 10000 2000 30742 MBR handling in the HSUPA Scheduler UA7.1.2
<EdchServiceParameterSet> users
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceLowRate HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler Kbits/s Integer 0 10000 0 27350 xCEM UA5.1
<HsdschServiceParameterSet>
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceMaxDelay HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler ms Integer 0 10000 20 27350 xCEM UA5.1
<HsdschServiceParameterSet>
<BTSEquipment>-<BTSCell>-<EdchConf>-
serviceMaxRate EdchServiceParameterSet 3 BTS none expert_tuning Radio HSUPA Scheduler Kbits/s Integer 0 10000 300 30742 MBR handling in the HSUPA Scheduler UA7.1.2
<EdchServiceParameterSet>
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceMaxRate HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler Kbits/s Integer 0 10000 300 27350 xCEM UA5.1
<HsdschServiceParameterSet>
<BTSEquipment>-<BTSCell>-<EdchConf>-
serviceMinRate EdchServiceParameterSet 3 BTS none expert_tuning Radio HSUPA Scheduler Kbits/s Integer 0 10000 40 30742 MBR handling in the HSUPA Scheduler UA7.1.2
<EdchServiceParameterSet>
<BTSEquipment>-<BTSCell>-<HsdpaConf>-
serviceMinRate HsdschServiceParameterSet 3 BTS none expert_tuning Radio HSDPA Scheduler Kbits/s Integer 0 10000 40 27350 xCEM UA5.1
<HsdschServiceParameterSet>
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- This parameter is a pointer to one of the twelve RNC iMCTA Service HSDPA intelligent Multi-Carrier Traffic Allocation
servicePriorityGeneralTableConfClassId 3 RNC none customer_setting Radio Mobility [HHO][iMCTA] N.A. ServiceLink N.A. 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> priority table instances which gives the priority for the neighboring FDD carriers (iMCTA)
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- This parameter is a pointer to one of the twelve RNC iMCTA Service HSDPA intelligent Multi-Carrier Traffic Allocation
servicePriorityTableForHsdpaConfClassId 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] N.A. ServiceLink N.A. 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> priority table instances which gives the priority for the neighboring FDD carriers (iMCTA)
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- This parameter is a pointer to one of the twelve RNC iMCTA Service HSUPA intelligent Multi-Carrier Traffic Allocation
servicePriorityTableForHsupaConfClassId 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] N.A. ServiceLink N.A. 29415 UA5.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> priority table instances which gives the priority for the neighboring FDD carriers (iMCTA)
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- This parameter indicates which ServiceSergmentation PriorityClass should be
serviceSegmentationPriorityTableId 3 RNC none customer_setting Radio Mobility [HHO][iMCTA] N.A. ServiceLink N.A. 33665 Multi-Layer developments UA6.0
ocation <FddIntelligentMultiCarrierTrafficAllocation> used for a given FDD cell
For each DlUserService Instance, a ImctaServiceTypeId is set which allows to
intelligent Multi-Carrier Traffic Allocation
serviceType DlUserService 3 RNC <RadioAccessService>-<DlUserService> none expert_tuning Radio Mobility [HHO][iMCTA] access the iMCTA priority tables (see 5.1.10). The operator has not to modify N.A. Enumerate N.A. 29415 UA5.0
(iMCTA)
the list without Alcatel-Lucent agreement.
For each HsdpaCombination Instance, service type is setted and allows to
<RadioAccessService>-<UserServiceProfiles>- intelligent Multi-Carrier Traffic Allocation
serviceType HsdpaCombination 3 RNC none expert_tuning Radio Mobility [HHO][iMCTA] access the iMCTA priority tables. The operator has not to modify the list without N.A. Enumerate N.A. 29415 UA5.0
<HsdpaUserServiceProfile>-<HsdpaCombination> (iMCTA)
Alcatel-Lucent agreement.
This attribute indicates the type of session (AccessSession, CellSession,
sessionType TraceSession 0 OAM critical customer_setting Radio Call Trace N.A. Enumerate N.A. 0 none UA3.1
GeographicalSession)
sgsnInterface PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none customer_setting Radio Mobility LTE Indicate SGSN interfaces N.A. Enumerate GnGp 100894 UMTS to LTE Handover LR14.2
This threshold is used in the measurement rules for cell re-selection. When HCS
<RNC>-<CellProfiles>-<CellSelectionProfile>- is used, it specifies the 2G RAT specific threshold in the serving cell used in the Cell reselection control in a Hierarchical Cell
sHcsRatGsm CellSelectionInfo 3 RNC none expert_tuning Radio Mobility [Cell Selection] dB Integer -106 90 2 N.A. 29816 UA5.0
<CellSelectionInfo> inter-RAT measurement rules. When HCS is not used, it specifies the limit for Structure (HCS)
Srxlev in the
This threshold is used in the measurement rules for cell re-selection. When HCS
<RNC>-<CellProfiles>-<CellSelectionProfile>- is used, it specifies the 2G RAT specific threshold in the serving cell used in the
sHcsRatGsm CellSelectionInfoConnectedMode 3 RNC none expert_tuning Radio Mobility [Cell Selection] dB Integer -106 90 2 N.A. 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode> inter-RAT measurement rules. When HCS is not used, it specifies the limit for
Srxlev in the
If enabled (i.e.set to True), the SHO algorithm will be triggered at the end of the
blocking phase of the SRLR (SHO decision based on the last RrcMeasReport
shoAfterBlockingPhaseEnable RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Mobility [SHO] N.A. Boolean VRAI 34231 Soft Handover developments UA6.0
received during the blocking phase).
(new value taken into account at the reception of next RRC
<RadioAccessService>-<DedicatedConf>- Enable/disable comparison with an absolute threshold the CPICH Ec/No or
shoLinkAdditionAbsoluteThresholdEnable SoftHoConf 3 RNC none customer_tuning Radio Mobility [SHO][Periodical] N.A. Boolean FAUX Q00852425 SHO Periodic Mode UA4.1
<HoConfClass>-<UsHoConf>-<SoftHoConf> CPICH Rscp of a cell chosen for addition to the Active Set.
This parameter will finally not be used by the feature
<RadioAccessService>-<DedicatedConf>-
shoLinkAdditionActiveSetSizeConsideration ShoLinkAdditionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none system_restricted Radio Mobility [SHO][Periodical] If SHO link addition algorithm extensions are enabled, in general, this value of N.A. Enumerate alwaysApplyAlgoExtension Q00852425 SHO Periodic Mode UA4.1
<ShoLinkAdditionParams> active set size controls the effectiveness of the algorithm extension. For example,
link addition threshold will not
<RadioAccessService>-<DedicatedConf>-
If checking absolute threshold during SHO radio link addition is enabled, this is the
shoLinkAdditionCpichEcNoThreshold ShoLinkAdditionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none customer_tuning Radio Mobility [SHO][Periodical] dB Float -24 0 0,1 -11 Q00852425 SHO Periodic Mode UA4.1
CPICH Ec/No value the measured cell is compared against.
<ShoLinkAdditionParams>
This parameter will finally not be used by the feature.
<RadioAccessService>-<DedicatedConf>-
shoLinkAdditionCpichRscpThreshold ShoLinkAdditionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none customer_tuning Radio Mobility [SHO][Periodical] dBm Integer -120 -25 -115 Q00852425 SHO Periodic Mode UA4.1
If checking absolute threshold during SHO radio link addition is enabled, this is the
<ShoLinkAdditionParams>
CPICH Rscp value the measured cell is compared against.
<RadioAccessService>-<DedicatedConf>- Enable/disable comparison with an absolute threshold the CPICH Ec/No or
shoLinkDeletionAbsoluteThresholdEnable SoftHoConf 3 RNC none customer_tuning Radio Mobility [SHO][Periodical] N.A. Boolean FAUX Q00852425 SHO Periodic Mode UA4.1
<HoConfClass>-<UsHoConf>-<SoftHoConf> CPICH Rscp of a cell chosen for deletion from the Active Set.
This parameter is finally not used by the feature
<RadioAccessService>-<DedicatedConf>-
shoLinkDeletionActiveSetSizeConsideration ShoLinkDeletionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none system_restricted Radio Mobility [SHO][Periodical] N.A. Enumerate alwaysApplyAlgoExtension Q00852425 SHO Periodic Mode UA4.1
If SHO link addition algorithm extensions are enabled, in general, this value of
<ShoLinkDeletionParams>
active set size controls the effectiveness of the algorithm extension. For example,
link addition threshold will not be
<RadioAccessService>-<DedicatedConf>-
If checking absolute threshold during SHO radio link deletion is enabled, this is the
shoLinkDeletionCpichEcNoThreshold ShoLinkDeletionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none customer_tuning Radio Mobility [SHO][Periodical] dB Float -24 0 0,1 -16 Q00852425 SHO Periodic Mode UA4.1
CPICH Ec/No value the measured cell is compared against.
<ShoLinkDeletionParams>
This parameter is finally not used by the feature.
<RadioAccessService>-<DedicatedConf>-
shoLinkDeletionCpichRscpThreshold ShoLinkDeletionParams 3 RNC <HoConfClass>-<UsHoConf>-<SoftHoConf>- none customer_tuning Radio Mobility [SHO][Periodical]
dBm Integer -120 -25 -115 Q00852425 SHO Periodic Mode UA4.1
<ShoLinkDeletionParams> If checking absolute threshold during SHO radio link deletion is enabled, this is the
CPICH Rscp value the measured cell is compared against.
the parameter is taken in account at next RL link setup procedure.Armed when
shoRlRestoreTimer RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Synchronisation Radio synchronisation s Integer 1 60 10 28036 Mobility Performance Improvements UA4.2
the SHO RL is established and stopped when RlRestore received;
<RadioAccessService>-<DedicatedConf>- This parameter is used for Enhanced Soft Shutdown procedure only. It is a
shutdownAlarmPriorityTableConfClassId ForcedHoConf 3 RNC <ShutdownConfClass>-<EnhancedShutdownConf>- none customer_setting Radio Power Management Shutdown pointer to one of the RNC iMCTA Alarm priority table instances which gives the N.A. ServiceLink N.A. 106905 Node B Soft Shutdown Evolution UA8.1
<ForcedHoConf> priority for the 2G and UMTS access whatever the mobile type.
<RadioAccessService>-<DedicatedConf>-
shutdownConfClassId AutoSwitchOffConfClass 3 RNC none customer_tuning Radio Power Management SwitchOff Pointer to the shutdown ConfClass used N.A. ServiceLink N.A. 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass>
shutdownConfClassId FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Power Management Shutdown Pointer to the shutdown configuration N.A. ServiceLink N.A. 28584 NodeB soft shutdown UA6.0
<RNC>-<CsCoreNetworkAccess>- RNC Connection to multiple Core Network
shutdownEndCriteria ShutdownParams 3 RNC none system_restricted Radio Power Management Stutdown N.A. Enumerate lockCommand 29417 UA5.0
<ShutdownParams> nodes (Iu-Flex)
<RNC>-<PsCoreNetworkAccess>- RNC Connection to multiple Core Network
shutdownEndCriteria ShutdownParams 3 RNC none system_restricted Radio Power Management Stutdown N.A. Enumerate lockCommand 29417 UA5.0
<ShutdownParams> nodes (Iu-Flex)
<RNC>-<CsCoreNetworkAccess>- RNC Connection to multiple Core Network
shutdownMethod ShutdownParams 3 RNC none system_restricted Radio Power Management Stutdown N.A. Enumerate 3gppCoreOffload 29417 UA5.0
<ShutdownParams> nodes (Iu-Flex)
<RNC>-<PsCoreNetworkAccess>- RNC Connection to multiple Core Network
shutdownMethod ShutdownParams 3 RNC none system_restricted Radio Power Management Stutdown N.A. Enumerate 3gppCoreOffload 29417 UA5.0
<ShutdownParams> nodes (Iu-Flex)
<RNC>-<CsCoreNetworkAccess>- RNC Connection to multiple Core Network
shutdownTimer ShutdownParams 3 RNC none system_restricted Radio Power Management Stutdown min Integer 0 1440 60 29417 UA5.0
<ShutdownParams> nodes (Iu-Flex)
<RNC>-<PsCoreNetworkAccess>- RNC Connection to multiple Core Network
shutdownTimer ShutdownParams 3 RNC none system_restricted Radio Power Management Stutdown min Integer 0 1440 60 29417 UA5.0
<ShutdownParams> nodes (Iu-Flex)
siActivityTimer BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Design Configuration TTI Integer 8 48 4 12 29840 Commercial Hsupa introduction UA5.0
Use to build SIB11 and RrcMeasurement Control, for intra-frequency and inter-
frequency measurements.
Meaning :
sib11AndDchNeighbouringFddCellAlgo FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Mobility [Cell Selection] N.A. Enumerate manual 0 none UA4.1
- classic or absent: the RNC builds the FDDCell SIB11 and RrcMeasControl with
all associated UMTS Neighbouring cells
- manual: the RNC
<RadioAccessService>-<DedicatedConf>- TS 25.331
sib11IntraFreqMeasurementFilterCoeffOnRACH RRCSysInfoMeas 3 RNC <MeasurementConfClass>-<RRCMeasurement>- none expert_tuning Radio Mobility [SHO] Filtering coefficient to be applied to the intra-frequency measurements reported N.A. Enumerate 3 34303 WQA Detected cell identification UA6.0
<RRCSysInfoMeas> on the RACH.
<RadioAccessService>-<DedicatedConf>-
TS 25.331
sib11IntraFreqMeasurementNbrOfCellOnRACH RRCSysInfoMeas 3 RNC <MeasurementConfClass>-<RRCMeasurement>- none expert_tuning Radio Mobility [SHO] N.A. Enumerate currentCell4 34303 WQA Detected cell identification UA6.0
maximum number of cells of which measurements are reported on RACH
<RRCSysInfoMeas>
<RNC>-<NodeB>-<FDDCell>-
sib11OrDchUsage GsmNeighbouringCell 3 RNC none customer_tuning Radio Mobility [Cell Selection] N.A. Enumerate N.A. 0 none UA6.0
<GsmNeighbouringCell>
Use to build SIB11 and RrcMeasurement Control, for intra-frequency and inter-
frequency measurements.
<RNC>-<NodeB>-<FDDCell>- Note that this parameter is only used when SIB11NeighboringFddCellAlgo is set
sib11OrDchUsage UMTSFddNeighbouringCell 3 RNC none customer_tuning Radio Mobility [Cell Selection] N.A. Enumerate N.A. 34291 Support of 64 UMTS neighbours UA7.1
<UMTSFddNeighbouringCell> to manual :
o for SIB11 : on the cell where the SYSINFO is broadcasted
o
When set to TRUE, indicates that the SIB12 feature is activated. In this case, the
sib12Enable FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility [Cell Selection] N.A. Boolean FAUX 33820 Broadcast of SIB12 UA6.0
parameter isDynamicSibAlgoWithSbAllowed has to be set to true.
Mobility between UMTS and LTE - Cell
sib19Enable FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility LTE When set to TRUE, indicates that the SIB19 feature is activated. In this case, the N.A. Boolean FAUX 81436 UA8.1
Reselection
parameter isDynamicSibAlgoWithSbAllowed has to be set to true.
When set to TRUE, indicates that the SIB4 feature is activated. In this case, the
sib4Enable FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility [Cell Selection] N.A. Boolean FAUX 33819 Broadcast of SIB4 UA6.0
parameter isDynamicSibAlgoWithSbAllowed has to be set to true.
TS 25.331 This attribute is used as an offset to the P-CPICH Tx power in SIB5
which is used by the UE in the RACH preamble to determine its initial power. The OneBTS parameters for Distributed Antenna
sib5PcpichPowerOffset FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial expert_tuning Radio Configuration dB Integer 0 50 1 0 127580 LR14.2
setting of P-CPICH Tx Power sent to the UE is reduced by the value of the System
attribute.
TS 25.331 maximum allowed ul tx power
<RadioAccessService>-<DedicatedConf>-
sibMaxAllowedUlTxPowerOnRach PowerConfClass 3 RNC none expert_tuning Radio Power Management [RACH] Maximum power that a UE in a particular cell is allowed to transmit on the RACH, dBm Integer -50 33 24 27901 UA04.2 Parameters evolution UA4.2
<PowerConfClass>
used in Sys Info Block 3 and 11
<RadioAccessService>-<DedicatedConf>- Maximum power that a UE in a particular cell is allowed to transmit on the Rach,
sibMaxAllowedUlTxPowerOnRachConnectedMode PowerConfClass 3 RNC none expert_tuning Radio Power Management [RACH] dBm Integer -50 33 33 27901 UA04.2 Parameters evolution UA4.2
<PowerConfClass> used in Sys Info Block 4 and 12.
sId Cdma1xCell 3 RNC <RNC>-<InterRat1xNeighbouring>-<Cdma1xCell> none customer_setting Radio Mobility [HHO][CDMA] CDMA system Id N.A. Integer 0 65535 N.A. 33853 Support of WCDMA to CDMA Handover UA6.0
TS 25.331
OPTIONAL
CellSelectionInfo :
<RNC>-<CellProfiles>-<CellSelectionProfile>-
sInterSearch CellSelectionInfo 3 RNC none customer_tuning Radio Mobility [Cell Selection] >SinterSearch
dB Integer -32 20 2 -32 18948 Inter-Frequency Cell Reselection UA3.0
<CellSelectionInfo>
It defines the threshold for inter-frequency measurement and for the HCS
(Hierarchical Cell Structure) measurement rules.
Thus, if Sx> Sintersearch, UE need not perform inter frequency measurement,
TS 25.331
OPTIONAL
CellSelectionInfo :
<RNC>-<CellProfiles>-<CellSelectionProfile>-
sInterSearch CellSelectionInfoConnectedMode 3 RNC none expert_tuning Radio Mobility [Cell Selection] >SinterSearch
dB Integer -32 20 2 -32 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode>
It defines the threshold for inter-frequency measurement and for the HCS
(Hierarchical Cell Structure) measurement rules.
Thus, if Sx> Sintersearch, UE need not perform inter frequency measurement,
TS 25.331
OPTIONAL
CellSelectionInfo :
<RNC>-<CellProfiles>-<CellSelectionProfile>- >SintraSearch
sIntraSearch CellSelectionInfo 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer -32 20 2 -32 18948 Inter-Frequency Cell Reselection UA3.0
<CellSelectionInfo> It defines the threshold for intra-frequency measuremnt and for the HCS
measurement rules.
Thus, if Sx> Sintrasearch, UE need not perform intra frequency measuerement,
where Sx corresponds to Squal
TS 25.331
OPTIONAL
CellSelectionInfo :
<RNC>-<CellProfiles>-<CellSelectionProfile>- >SintraSearch
sIntraSearch CellSelectionInfoConnectedMode 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer -32 20 2 -32 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode> It defines the threshold for intra-frequency measuremnt and for the HCS
measurement rules.
Thus, if Sx> Sintrasearch, UE need not perform intra frequency measuerement,
where Sx corresponds to Squal for
<RadioAccessService>-<EdchRncConf>- Defines the filter coefficient for dedicated NBAP SIR Error measurement.
sirErrorFilterCoeff EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control N.A. Enumerate 0 120363 Smart phone EDCH resource usage. LR13.1
<EdchRncSmartphoneConf> Meaningful only if psRabBadRadioSmartEdchResourceUsageActivation is True
NbapDedicatedMeasConfigForCa <RNC>-<CallTrace>-<AccessSession>-
sirReportPeriodicity 0 RNC partial customer_tuning Radio Call Trace SIR reporting interval ms Integer 500 10000 500 500 34583 UA07 Call Trace Development UA7.0
llTrace <NbapDedicatedMeasConfigForCallTrace>
NbapDedicatedMeasConfigForCa <RNC>-<CallTrace>-<GeographicalSession>-
sirReportPeriodicity 0 RNC partial customer_tuning Radio Call Trace SIR reporting interval ms Integer 500 10000 500 500 34583 UA07 Call Trace Development UA7.0
llTrace <NbapDedicatedMeasConfigForCallTrace>
NbapDedicatedMeasConfigForCa <RNC>-<CallTrace>-<AccessSession>-
sirRequired 0 RNC partial customer_tuning Radio Call Trace Indicate if SIR is present in the NBAP dedicated measurements for Call Trace. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
llTrace <NbapDedicatedMeasConfigForCallTrace>
NbapDedicatedMeasConfigForCa <RNC>-<CallTrace>-<GeographicalSession>-
sirRequired 0 RNC partial customer_tuning Radio Call Trace Indicate if SIR is present in the NBAP dedicated measurements for Call Trace. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
llTrace <NbapDedicatedMeasConfigForCallTrace>
slidingWindowSize DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation Defines radio link's sliding window size for averaging the TOAs values N.A. Integer 0 255 3 0 none UA2.1
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
slidingWindowSize FACH 2 RNC partial system_restricted Radio Synchronisation Iub Synchronisation Defines radio link's sliding window size for averaging the TOAs values N.A. Integer 0 255 3 16717 RRC States Management UA3.0
<FACH>
<RadioAccessService>-<DlRbSetConf>- a sliding window of size 'n' is defined to keep the time of arrival for the last 'n' Iu
slidingWindowSize IuCsTimingAlignment 3 RNC none system_restricted Radio Synchronisation Iu-CS Timing Alignment frames Integer 0 255 N.A. 22788 Iu-CS Timing Alignment UA3.1
<IuCsTimingAlignment> DL frames.
slidingWindowSize PCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Synchronisation Iub Synchronisation Defines radio link's sliding window size for averaging the TOAs values N.A. Integer 0 255 3 16717 RRC States Management UA3.0
RB adaptation based on traffic: DL and UL
slidingWindowSize UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation Defines radio link's sliding window size for averaging the TOAs values N.A. Integer 0 255 3 27330 UA4.2
with start @64kbit/s
<RNC>-<NodeB>-<FDDCell>-
This parameter defines the radio links sliding window size for averaging the TOAs
slidingWindowsSize CchDlTimingAdjustmentParams 2 RNC <MbmsResourceClass2>- partial system_restricted Radio Synchronisation N.A. Integer 0 255 3 31868 MBMS Broadcast UA7.1
values
<CchDlTimingAdjustmentParams>
Parameters set for HCS cell-reselection. This threshold is used in the
<RNC>-<CellProfiles>-<CellSelectionProfile>- measurement rules for cell re-selection when HCS is used. It specifies the RAT Cell reselection control in a Hierarchical Cell
sLimitSearchRat HcsCellParam 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Integer -32 20 28 29816 UA5.0
<CellSelectionInfo>-<HcsCellParam> specific threshold (in dB) in the serving UTRA cell above which the UE may Structure (HCS)
choose to not perform any inte
Parameters set for HCS cell-reselection. This threshold is used in the
<RNC>-<CellProfiles>-<CellSelectionProfile>-
measurement rules for cell re-selection when HCS is used. It specifies the RAT Cell reselection control in a Hierarchical Cell
sLimitSearchRat HcsCellParam 3 RNC <CellSelectionInfoConnectedMode>- none customer_tuning Radio Mobility [Cell Selection] dB Integer -32 20 28 29816 UA5.0
specific threshold (in dB) in the serving UTRA cell above which the UE may Structure (HCS)
<HcsCellParam>
choose to not perform any inte
smartEdchResourceUsageActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSUPA Congestion Control Enables Smart phone EDCH resource usage feature. N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
smartEdchResourceUsageActivation EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_init Radio HSUPA Congestion Control Enables Smart phone EDCH resource usage feature. N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
softCongestionActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Load Management Soft Congestion This parameter enables/disables the support of soft congestion in the BTS. N.A. Boolean FAUX 119026 Soft Congestion UA8.1
<RadioAccessService>-<SoftCongestion>-
softCongestionCapability SoftCongestionServiceInfo 3 RNC <SoftCongestionFrequency>- none customer_setting Radio Load Management Soft Congestion Preemption capability of the service; N.A. Enumerate ShallNotTriggerSoftCongestion 119026 Soft Congestion UA8.1
<SoftCongestionServiceInfo>
Indicates if CAC failure during an Always on upsize on HSPA may trigger soft Soft Congestion: Mobility, RRC Connection
softCongestionCapabilityForAlwaysOnToHspa SoftCongestion 3 RNC <RadioAccessService>-<SoftCongestion> none customer_setting Radio Call Admission Control CAC N.A. Enumerate ShallNotTriggerSoftCongestion 124880 LR Future
congestion procedure and transition scenario
Indicates if CAC failure during an IMCTA alarm procedure may trigger soft Soft Congestion: Mobility, RRC Connection
softCongestionCapabilityForImctaAlarm SoftCongestion 3 RNC <RadioAccessService>-<SoftCongestion> none customer_setting Radio Call Admission Control CAC N.A. Enumerate ShallNotTriggerSoftCongestion 124880 LR Future
congestion procedure and transition scenario
Indicates if CAC failure during an IMCTA CAC procedure may trigger soft Soft Congestion: Mobility, RRC Connection
softCongestionCapabilityForImctaCac SoftCongestion 3 RNC <RadioAccessService>-<SoftCongestion> none customer_setting Radio Call Admission Control CAC N.A. Enumerate ShallNotTriggerSoftCongestion 124880 LR Future
congestion procedure and transition scenario
Indicates if CAC failure during a rab Assign on HSPA may trigger soft congestion Soft Congestion: Mobility, RRC Connection
softCongestionCapabilityForRabAssignToHspa SoftCongestion 3 RNC <RadioAccessService>-<SoftCongestion> none customer_setting Radio Call Admission Control CAC N.A. Enumerate ShallNotTriggerSoftCongestion 124880 LR Future
procedure and transition scenario
Indicates if CAC failure during an RRC establishment cause other than
softCongestionCapabilityForRrc SoftCongestion 3 RNC <RadioAccessService>-<SoftCongestion> none customer_setting Radio Load Management Soft Congestion N.A. Enumerate ShallNotTriggerSoftCongestion 119026 Soft Congestion UA8.1
Emergency Call may trigger soft congestion procedure
Indicates if CAC failure during a SHO procedure on HSPA may trigger soft Soft Congestion: Mobility, RRC Connection
softCongestionCapabilityForShoToHspa SoftCongestion 3 RNC <RadioAccessService>-<SoftCongestion> none customer_setting Radio Call Admission Control CAC N.A. Enumerate ShallNotTriggerSoftCongestion 124880 LR Future
congestion procedure and transition scenario
<RadioAccessService>-<SoftCongestion>-
softCongestionVulnerability SoftCongestionServiceInfo 3 RNC <SoftCongestionFrequency>- none customer_setting Radio Load Management Soft Congestion Vulnerability of the service N.A. Enumerate SubjectToSoftCongestion 119026 Soft Congestion UA8.1
<SoftCongestionServiceInfo>
Guard timer required to prevent TTI reconfiguration ping pong due to soft/softer
<RadioAccessService>-<EdchRncConf>-
softHo2msTtiReconfStabliserTimer EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control handoff. ms Integer 0 60000 100 3000 120363 Smart phone EDCH resource usage. LR13.1
<EdchRncSmartphoneConf>
Meaningful only if psRabBadRadioSmartEdchResourceUsageActivation is True
Threshold for addition of a SHO leg from a UE Intra-Frequency measurement
softHoAddThresholdOneShot RadioAccessService 3 RNC <RadioAccessService> none customer_tuning Radio Mobility [SHO][Periodical] dB Float 0 14,5 0,5 4 34227 State transitioning developments UA6.0
report following transition to Cell_DCH state.
softShutdownMode NodeB 3 RNC <RNC>-<NodeB> none customer_setting Radio Power Management Shutdown This parameters identifies the Soft Shutdown mode allowed on this Node B. N.A. Enumerate none 106905 Node B Soft Shutdown Evolution UA8.1
Shutting down timer used for every resource when administrativeState is set to
softShutdownTimer BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Power Management Shutdown s Integer 1 300 60 81122 Enhanced Block CELL Procedure UA7.1.3
shuttingDown (soft shutdown procedure)
<RadioAccessService>-<DedicatedConf>-
softShutdownTimer ShutdownConfClass 3 RNC none expert_tuning Radio Power Management Shutdown Soft shutdown timer s Integer 0 3600 60 28584 NodeB soft shutdown UA6.0
<ShutdownConfClass>
(Monday, Tuesday, Wednesday, UTRAN Self Optimisation (CPICH auto
sonDays SonSession 3 RNC <RadioAccessService>-<SonSession> none expert_tuning Radio Power Management [Common Channels] The list of days for which the SON session iteration must be applied. Enumerate 123989 LR Future
Thursday, Friday) adjustment)
UTRAN Self Optimisation (CPICH auto
sonDlFrequency SonSession 3 RNC <RadioAccessService>-<SonSession> none expert_tuning Radio Power Management [Common Channels] Down link frequency number of the SON area N.A. Integer 0 16383 N.A. 123989 LR Future
adjustment)
UTRAN Self Optimisation (CPICH auto
sonSessionRefList FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> partial expert_tuning Radio Power Management [Common Channels] List of the Session in which the cell is involved N.A. ServiceLink <Null> 123989 LR Future
adjustment)
Cell load exchange for I-RAT mobility from
sonTransferDlLoadType FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility LTE Define the DL load type sent in the SON transfer message Enumerate totalDlLoad 155968 LR13.1
LTE
List of down link frequency number of the SON area UTRAN Self Optimisation (CPICH auto
sonUpdateDlFrequencyList SonSession 3 RNC <RadioAccessService>-<SonSession> none customer_init Radio Power Management [Common Channels] N.A. Integer 0 16383 N.A. 123989 LR Future
adjustment)
The number of consecutive packets sent in SO state for compressor to transit Robust Header Compression (ROHC - RFC
soToFoPacketCountThreshold RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none customer_setting Radio Protocols ROHC frames Integer 0 5000 1 100 22845 LR Future
down to FO state. 0 means always stay in FO state. (Mode: U; Profile >= 1) 3095/4815)
<RadioAccessService>- OFF: Source conformance algorithm is not activated
sourceConformanceActivation DlSourceConformanceInformation 3 RNC <SourceConformanceConf>- none customer_setting Radio HSDPA Source Conformance ON: Source Conformance algorithm is activated. Non compliant
N.A. Enumerate Off 29840 Commercial Hsupa introduction UA5.0
<DlSourceConformanceInformation> traffic is discarded
This parameter defines whether the Source conformance algorithm is activated.
MbmsDlSourceConformanceInfor OFF: Source conformance algorithm is not activated.
sourceConformanceActivation 3 RNC none system_restricted Radio Broadcast Services MBMS N.A. Enumerate Off 31868 MBMS Broadcast UA7.1
mation ON: Source Conformance algorithm is activated. Non compliant traffic is
discarded
<RadioAccessService>-
OFF: Source conformance algorithm is not activated
sourceConformanceActivation UlSourceConformanceInformation 3 RNC <SourceConformanceConf>- none customer_setting Radio HSUPA Source conformance N.A. Enumerate Off 29840 Commercial Hsupa introduction UA5.0
ON: Source Conformance algorithm is activated.
<UlSourceConformanceInformation>
sourcePortNumber NatpTable 3 BTS <BTSEquipment>-<NATP>-<NatpTable> none customer_setting Radio Protocols N.A. Integer 10000 19999 N.A. 33968 NAT-P enhancement UA6.0
specificConfigurationAndRules RNC 0 RNC <RNC> critical customer_setting RNC Mode Selection This parameter tells if the RNC is subject to specific configuration & rules; N.A. Integer 0 2147483647 0 0 none UA8.1
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
speedDependScalingFactorTReselection CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Used by the UE in high mobility state N.A. Float 0 1 0,1 1 29816 UA5.0
<CellSelectionInfo>-<CrMgt> Structure (HCS)
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
speedDependScalingFactorTReselection CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Used by the UE in high mobility state N.A. Float 0 1 0,1 1 29816 UA5.0
<CellSelectionInfoConnectedMode>-<CrMgt> Structure (HCS)
<RadioAccessService>-<DedicatedConf>- it specifies Scheduling Priority Indicator for a given E-DCH MAC-d flow (up to 8,
spi CommonEdchMacdFlow 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none customer_setting Radio Power Management FACH that is, 8 is 3GPP maximum allowed limit, but in our design, we will define and N.A. Integer 0 15 1 15 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchMacdFlow> use only 7 out of 8 common E-DCH MAC-d flows). NBAP.
<RadioAccessService>-<DedicatedConf>-
spi CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none system_restricted Radio HSDPA FACH This value gives the Scheduling priority Indicator value of the current queue. N.A. Integer 1 15 1 15 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<CommonPriorityQueue> 168710
<RadioAccessService>-<DedicatedConf>-
spi PagingPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaPagingSysInfo>- none customer_tuning Radio Accessibility Paging Scheduling Priority Indicator N.A. Integer 0 15 15 120428 Enhanced PCH support for Qchat LR Future
<PagingPriorityQueue>
This attribute provides the RNC Scheduling Priority Indicator (SPI) associated to
a given TrafficClassBasedQoS,/ARPBasedQoS/THPBasedQoS instances
<RadioAccessService>-<TrafficClassBasedQos>- combination.
QoS differentiation based on TC, ARP and
spi ThpBasedQos 3 RNC none customer_tuning Radio PS Call management QoS Differentiation N.A. Integer 0 15 0 25080 UA5.0
<ArpBasedQos>-<ThpBasedQos>
THP
This attribute is used in the HSDPA packet scheduler to prioritize the different
MAC-d entiti
spreadingFactor Ocns 2 RNC <RNC>-<NodeB>-<FDDCell>-<Ocns> partial customer_tuning Radio Power Management OCNS Chip rate/data rate to simulate N.A. Enumerate spreadingFactor32 34195 Support OCNS with HSDPA UA6.0
<RadioAccessService>-<DedicatedConf>- The number of OVSF codes of SFX in the tree is monitored at each OVSF code
spreadingFactorLevelForOvsfMonitoring HsPdschDynamicManagement 3 RNC <HsdpaCellClass>- none expert_tuning Radio HSDPA Codes allocation or deallocation. Herein X corresponds to this parameter called N.A. Enumerate 16 29800 Dynamic DL Code Tree Mgt For HSDPA UA5.0
<HsPdschDynamicManagement> spreadingFactorLevelForOvsfMonitoring.
TS 25.331
After the establishment of the uplink physical channel, the mobile must not send
<RadioAccessService>-<DedicatedConf>-
srbDelay UlInnerLoopConf 3 RNC none expert_tuning Radio Power Management UL Inner Loop any data on signalling radio bearers RB0 to RB4 during the number of frames N.A. Integer 0 7 7 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<UlInnerLoopConf>
indicated in the IE "SRB delay".
It is given in number of frames.
<RadioAccessService>-<DedicatedConf>- This parameter defines the maximum number of users that can have SRB
srbEstThreshold CacOnFachParam 3 RNC none system_restricted Radio Call Admission Control Always-on CAC Fail N.A. Integer 0 100 20 16717 RRC States Management UA3.0
<CacConfClass>-<CacOnFachParam> configuration in CELL_FACH.
This parameter indicates the Mac Logical Priority (MLP) for each of the
srbMlp RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio PS Call management QoS Differentiation N.A. Integer 1 8 (1, 2, 3, 4) 16717 RRC States Management UA3.0
supported SRB.
This parameter defines whether feature 33581 SRB on E-DCH during call is
srbOnEdchDuringCallActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSUPA Service N.A. Boolean FAUX 33581 SRB on HS-DSCH/E-DCH during Call UA6.0
activated or not. 33581 is part of the global feature 97424 Parity
srbOverHsdpaGbr SrbQos 3 RNC <RadioAccessService>-<SrbQos> none expert_tuning Radio HSDPA Service guaranteed bitrate of SRB on HS-DSCH (for F-DPCH calls) bits/s Integer 0 256000 1 13600 29810 Fractional DPCH - SRB over HSPA UA8.1
SPI used for SRB #1 on HS-DSCH (for F-DPCH calls). SPI for SRB #2,3,4 are
srbOverHsdpaSpi SrbQos 3 RNC <RadioAccessService>-<SrbQos> none expert_tuning Radio HSDPA Service N.A. Integer 3 15 1 15 29810 Fractional DPCH - SRB over HSPA UA8.1
calculated by RNC as srbOverHsdpaSpi -1, -2, -3
<RadioAccessService>-<DedicatedConf>- Hysteresis to apply to srbOverHspaEcN0Threshold below which radio conditions
srbOverHspaEcNoHysteresis MeasurementConfClass 3 RNC none expert_tuning Radio HSDPA Service dB Float 0 7,5 0,5 1 29810 Fractional DPCH - SRB over HSPA UA8.1
<MeasurementConfClass> are not good enough to support SRB on HSPA
<RadioAccessService>-<DedicatedConf>- Ec/N0 threshold above which radio conditions are good enough to support SRB
srbOverHspaEcNoThreshold MeasurementConfClass 3 RNC none expert_tuning Radio HSDPA Service dB Integer -24 0 1 -12 29810 Fractional DPCH - SRB over HSPA UA8.1
<MeasurementConfClass> on HSPA
<RadioAccessService>-<DedicatedConf>- Hysteresis to apply to srbOverHspaRscpThreshold below which radio conditions
srbOverHspaRscpHysteresis MeasurementConfClass 3 RNC none expert_tuning Radio HSDPA Service dB Float 0 7,5 0,5 1 29810 Fractional DPCH - SRB over HSPA UA8.1
<MeasurementConfClass> are not good enough to support SRB on HSPA
<RadioAccessService>-<DedicatedConf>- RSCP threshold above which radio conditions are good enough to support SRB
srbOverHspaRscpThreshold MeasurementConfClass 3 RNC none expert_tuning Radio HSDPA Service dBm Integer -120 -25 1 -103 29810 Fractional DPCH - SRB over HSPA UA8.1
<MeasurementConfClass> on HSPA
Enables Smart EDCH resource usage feature for SRB transport channel
srbSmartEdchResourceUsageActivation EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
selection. Meaningful only if smartEdchResourceUsageActivation is True
srbSpi SrbQos 3 RNC <RadioAccessService>-<SrbQos> none customer_tuning Radio HSUPA Service SPI used for SRB on E-DCH during a call N.A. Integer 0 15 15 33581 SRB on HS-DSCH/E-DCH during Call UA6.0
SRLR delay margin; used only for 3.4 kbps DCCH if
srlrDelayMargin ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none customer_setting Radio Channels & Bearers Activation Time is13dot6DcchDecouplingEnabled is true (can apply to the 13.6 DCCH if the flag is ms Integer 20 1500 10 160 27034 Update of RRM parameters during SRLR UA6.0
false)
SRLR delay margin; applied to 13.6kbps DCCH if
srlrDelayMargin13dot6 ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none customer_setting Radio Channels & Bearers Activation Time is13dot6DcchDecouplingEnabled is true. (When set to false, the use of 13.6kbps ms Integer 20 1500 10 160 27034 Update of RRM parameters during SRLR UA6.0
SRLRDelayMargin is disabled)
TS 25.433 Secondary SCH power
Power on the Secondary Synchro Channel relative to the Pcpich power.
Parameter Class Evolution in UA08 & UTRAN
sschPowerRelativeToPcpich FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Power Management Common Channels SCH Power represents a power level relative to the FDD-CPICH power dB Float -35 15 0,1 -5 80685 UA8.1
External Document Page 57 model simplification Alcatel-Lucent
configured in a cell.
With a low SCH Power transmitted by the cell, the mobile can’t o
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
sschTstdIndicator FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial system_restricted Radio Protocols Indicate if the Time Switched Transmit Diversity is activated on secondary SCH N.A. Enumerate inactive 28016 3GPP compliant NBAP (multi-vendor) UA5.0
This threshold is used in the measurement rules for cell re-selection. When HCS
<RNC>-<CellProfiles>-<CellSelectionProfile>- is used, it specifies the limit for Srxlev in the serving cell below which the UE shall Cell reselection control in a Hierarchical Cell
sSearchHcs CellSelectionInfo 3 RNC none expert_tuning Radio Mobility [Cell Selection] dB Integer -106 90 2 N.A. 29816 UA5.0
<CellSelectionInfo> initiate measurements of all neighbouring cells of the serving cell. When HCS is Structure (HCS)
not us
This threshold is used in the measurement rules for cell re-selection. When HCS
<RNC>-<CellProfiles>-<CellSelectionProfile>- is used, it specifies the limit for Srxlev in the serving cell below which the UE shall
sSearchHcs CellSelectionInfoConnectedMode 3 RNC none expert_tuning Radio Mobility [Cell Selection] dB Integer -106 90 2 50 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode> initiate measurements of all neighbouring cells of the serving cell. When HCS is
not us
TS 25.331
Threshold to kick off measurements on RATId
<RNC>-<CellProfiles>-<CellSelectionProfile>-
sSearchRatGsm CellSelectionInfo 3 RNC none customer_tuning Radio Mobility [Cell Selection] cells for eventually performing an intersystem cell
dB Integer -32 20 2 -32 13452 3G to 2G Cell Reselection UA2.0
<CellSelectionInfo>
reselection following algorithm described in TS
25.304.
TS 25.331
Threshold to kick off measurements on RATId
<RNC>-<CellProfiles>-<CellSelectionProfile>-
sSearchRatGsm CellSelectionInfoConnectedMode 3 RNC none expert_tuning Radio Mobility [Cell Selection] cells for eventually performing an intersystem cell dB Integer -32 20 2 -32 33819 Broadcast of SIB4 UA6.0
<CellSelectionInfoConnectedMode>
reselection following algorithm described in TS
25.304.
This configurable parameter allows the operator to provision the stagnation range
<RadioAccessService>- UTRAN Self Optimisation (CPICH auto
stagnationRange PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] percentage used by the 100508/123989 UTRAN Self Optimisation feature to % Integer 0 100 1 5 123989 LR Future
<PcpichPowerAutoAdjConfClass> adjustment)
determine whether the algorithm has converged.
TS 25.433 toaws. This parameter corresponds to TOAWS 3GPP
parameter.TOAWS (Time of Arrival Window Startpoint) is the window startpoint.
startPoint DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation ms Integer 0 1279 50 0 none UA2.1
DL data frames are expected to be received after this window startpoint.
TOAWS is defined with a positive value relati
<RadioAccessService>-<DlRbSetConf>- This parameters marks the start of window, in which the arrival of a DL frame is
startPoint IuCsTimingAlignment 3 RNC none system_restricted Radio Synchronisation Iu-CS Timing Alignment ms Integer 0 255 N.A. 22788 Iu-CS Timing Alignment UA3.1
<IuCsTimingAlignment> acceptable.
TS 25.433 toaws
This parameter corresponds to TOAWS 3GPP parameter.
startPoint NodeB 3 RNC <RNC>-<NodeB> none system_restricted Radio Synchronisation Iub Synchronisation TOAWS (Time of Arrival Window Startpoint) is the window startpoint. DL data ms Integer 0 1279 50 0 none UA1
frames are expected to be received after this window startpoint. TOAWS is
defined with a positive value rela
TS 25.433 toaws. This parameter corresponds to TOAWS 3GPP
parameter.TOAWS (Time of Arrival Window Startpoint) is the window startpoint. RB adaptation based on traffic: DL and UL
startPoint UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation ms Integer 0 1279 50 27330 UA4.2
DL data frames are expected to be received after this window startpoint. with start @64kbit/s
TOAWS is defined with a positive value relati
startTime AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial system_restricted Radio Call Trace Time between the session creation and the session first activation. min Integer 0 1440 0 14759 Full Call Trace (UMTS02) UA2.0
startTime CellSession 0 RNC <RNC>-<ObjectTrace>-<CellSession> partial system_restricted Radio Call Trace Times in minutes before session activation. min Integer 0 1440 0 14759 Full Call Trace (UMTS02) UA2.0
startTime CoreSession 0 RNC <RNC>-<CallTrace>-<CoreSession> partial system_restricted Radio Call Trace Time between the session creation and the session first activation. min Integer 0 1440 0 14759 Full Call Trace (UMTS02) UA2.0
startTime FailureSession 0 RNC <RNC>-<CallTrace>-<FailureSession> partial expert_tuning Radio Call Trace Elapsed time in minutes between session creation and session activation min Integer 0 1440 1 0 120498 UA09 Call Trace Developments LR13.1
startTime GeographicalSession 0 RNC <RNC>-<CallTrace>-<GeographicalSession> partial system_restricted Radio Call Trace Times in minutes before session activation. min Integer 0 1440 0 14759 Full Call Trace (UMTS02) UA2.0
Time between the session creation and the session first activation.
startTime IuBcSession 0 RNC <RNC>-<ObjectTrace>-<IuBcSession> partial system_restricted Radio Call Trace min Integer 0 1440 0 30223 UA05 call trace enhancements UA5.0
0 means start immedialty.
Time between the session creation and the session first activation.
startTime IuCsSession 0 RNC <RNC>-<ObjectTrace>-<IuCsSession> partial system_restricted Radio Call Trace min Integer 0 1440 0 30223 UA05 call trace enhancements UA5.0
0 means start immedialty.
Time between the session creation and the session first activation.
startTime IuPsSession 0 RNC <RNC>-<ObjectTrace>-<IuPsSession> partial system_restricted Radio Call Trace min Integer 0 1440 0 30223 UA05 call trace enhancements UA5.0
0 means start immedialty.
Time between the session creation and the session first activation.
startTime IuRSession 0 RNC <RNC>-<ObjectTrace>-<IuRSession> partial system_restricted Radio Call Trace min Integer 0 1440 0 30223 UA05 call trace enhancements UA5.0
0 means start immedialty.
Time between the session creation and the session first activation.
startTime NeighbouringSession 0 RNC <RNC>-<CallTrace>-<NeighbouringSession> partial system_restricted Radio Call Trace min Integer 0 1440 0 30223 UA05 call trace enhancements UA5.0
0 means start immedialty.
Time between the session creation and the session first activation.
Analysis and saving function for abnotmal drop
startTime RNCSession 0 RNC <RNC>-<ObjectTrace>-<RNCSession> partial system_restricted Radio Call Trace min Integer 0 1440 0 30235 UA4.3K
0 means start immedialty. call
Time between the session creation and the session first activation. 0 means start
startTime SessionMTc 0 RNC <RNC>-<CallTrace>-<SessionMTc> partial system_restricted Radio Call Trace min Integer 0 1440 0 33692 Subscriber Unit Air Status Measurement UA6.0
immedialty.
Time between the session creation and the session first activation. 0 means start
startTime SessionMTg 0 RNC <RNC>-<CallTrace>-<SessionMTg> partial system_restricted Radio Call Trace min Integer 0 1440 0 33692 Subscriber Unit Air Status Measurement UA6.0
immedialty.
UTRAN Self Optimisation (CPICH auto
startTime SonSession 3 RNC <RadioAccessService>-<SonSession> none customer_setting Radio Power Management [Common Channels] The date and time of the start of the SON session Float 0.00 24.00 0.01 0.00 123989 LR Future
adjustment)
<RadioAccessService>-<DedicatedConf>-
startTimeValiditySwitchOff AutoSwitchOffConfClass 3 RNC none customer_setting Radio Power Management SwitchOff Start for automatic switch off period allowed N.A. Integer 0 235959 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass>
If its value is null, then state changes will be sent to the OMC at the rate at which
the OMC is able to handle and acknowledge them. If its value is not null, it means
stateChangeNotificationDelay RNC 3 RNC <RNC> none customer_setting Radio Design s Integer 0 3600 0 20424 Enhanced Alarm Management UA3.1
that even if a grouped state change message has been acknowledged by the
OMC, the next
This configurable parameter allows the operator to provision the threshold
<RadioAccessService>- percentage of cells having changed of overload status (from “overloaded” to non UTRAN Self Optimisation (CPICH auto
statusChangeThresholdPingPong PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] % Integer 0 100 1 5 123989 LR Future
<PcpichPowerAutoAdjConfClass> overloaded” or conversely) between 2 iterations, used by the 100508/123989 adjustment)
UTRAN Self Optimisation f
This configurable parameter allows the operator to provision the threshold
<RadioAccessService>- percentage of cells having changed of overload status (from “overloaded” to non UTRAN Self Optimisation (CPICH auto
statusChangeThresholdRestart PcpichPowerAutoAdjConfClass 3 RNC partial expert_tuning Radio Power Management [Common Channels] % Integer 0 100 1 10 123989 LR Future
<PcpichPowerAutoAdjConfClass> overloaded” or conversely) between 2 iterations, used by the 100508/123989 adjustment)
UTRAN Self Optimisation f
<RadioAccessService>-<AlwaysOnConf>- It is the size of the averaging not-sliding window used to evaluate the throughput Always On: User management with two-step
step1AverageWindow AoOnDchParam 3 RNC none system_restricted Radio PS Call management Always-on ms Integer 10 10000 10 500 13473 UA2.0
<AoOnDchParam> and compare it with the step1Throughputthreshold parameter downsizing
<RadioAccessService>-<AlwaysOnConf>- It is the size of the averaging not-sliding window used to evaluate the throughput Always On: User management with two-step
step1AverageWindow AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on ms Integer 10 10000 10 500 13473 UA2.0
<AoOnFachParam> and compare it with the step1Throughputthreshold parameter downsizing
<RadioAccessService>-<AlwaysOnConf>- This is the threshold of the TRB RLC Buffer occupancy that is monitored by the Always On: User management with two-step
step1DlRlcBoThreshold AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on bytes Integer 0 32000 1024 13473 UA2.0
<AoOnFachParam> RNC on the downlink for upsized trigger. downsizing
RNC U-plane load-based DL Upsize threshold, Threshold on TRB RLC Buffer
<RadioAccessService>-<AlwaysOnConf>-
step1DlRlcBoThresholdECellFach AoOnEnhancedFach 3 RNC none expert_tuning Radio Power Management FACH occupancy that is monitored by the RNC on the downlink for transition from bytes Integer 0 1000000 1 1300 108103 Enhanced Cell Fach for DL and UL LR14.2
<AoOnEnhancedFach>
enhanced CELL_FACH to CELL_DCH.
it is used to determine the level of traffic activity of a user. If the throughput
<RadioAccessService>-<AlwaysOnConf>- Always On: User management with two-step
step1DlUlThroughputThreshold AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on becomes below that threshold, always on timer T1 is started and then potentially, bits/s Integer 0 32000 6000 13473 UA2.0
<AoOnFachParam> downsizing
the user radio configuration will be downgraded to always on step 1.
<RadioAccessService>-<AlwaysOnConf>- RNC U-plane load-based UL/DL Downsize threshold. Threshold on user rate for
step1DlUlThroughputThresholdECellFach AoOnEnhancedFach 3 RNC none expert_tuning Radio Power Management FACH bits/s Integer 0 1000000 1 32000 108103 Enhanced Cell Fach for DL and UL LR14.2
<AoOnEnhancedFach> DL and UL transition from CELL_DCH to enhanced CELL_FACH.
it is used to determine the level of traffic activity of a user. If the throughput
<RadioAccessService>-<AlwaysOnConf>- becomes below that threshold, always on timer T1 is started and then potentially, Always On: User management with two-step
step1ThroughputThreshold AoOnDchParam 3 RNC none system_restricted Radio PS Call management Always-on bit/s Integer 0 32000 6000 13473 UA2.0
<AoOnDchParam> the user radio configuration will be downgraded to always on step 1. Once downsizing
downsized, this
it is used to avoid messaging overflow in case an upgrade from always on step 1
<RadioAccessService>-<AlwaysOnConf>- Always On: User management with two-step
step1TimerBetween2Reports AoOnDchParam 3 RNC none system_restricted Radio PS Call management Always-on is required. This parameter sets the minimum time between the emission of two ms Integer 10 10000 10 1600 13473 UA2.0
<AoOnDchParam> downsizing
events "upgrade required" by the Inode.
it is used to avoid messaging overflow in case an upgrade from always on step 1
<RadioAccessService>-<AlwaysOnConf>- Always On: User management with two-step
step1TimerBetween2Reports AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on is required. This parameter sets the minimum time between the emission of two ms Integer 10 10000 10 1600 13473 UA2.0
<AoOnFachParam> downsizing
events "upgrade required" by the Inode.
<RadioAccessService>-<AlwaysOnConf>- It is the size of the averaging not-sliding window used to evaluate the throughput Always On: User management with two-step
step2AverageWindow AoOnDchParam 3 RNC none system_restricted Radio PS Call management Always-on ms Integer 10 10000 10 500 13473 UA2.0
<AoOnDchParam> and compare it with the step2Throughputthreshold parameter downsizing
<RadioAccessService>-<AlwaysOnConf>- It is the size of the averaging not-sliding window used to evaluate the throughput Always On: User management with two-step
step2AverageWindow AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on ms Integer 10 10000 10 500 13473 UA2.0
<AoOnFachParam> and compare it with the step2Throughputthreshold parameter downsizing
It is used to determine the level of traffic activity of a user that is already in
<RadioAccessService>-<AlwaysOnConf>- always-on step 1 or simply trafficking if the transition to step 1 is not allowed. If Always On: User management with two-step
step2ThroughputThreshold AoOnDchParam 3 RNC none system_restricted Radio PS Call management Always-on bit/s Integer 0 32000 0 13473 UA2.0
<AoOnDchParam> the throughput remains below or equal that threshold during timer T2, user downsizing
context wil
It is used to determine the level of traffic activity of a user that is already in
<RadioAccessService>-<AlwaysOnConf>- Always On: User management with two-step
step2ThroughputThreshold AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on always-on step 1. If the throughput remains below or equal that threshold during bit/s Integer 0 32000 0 13473 UA2.0
<AoOnFachParam> downsizing
timer T2, user context will be released.
<RadioAccessService>-<DedicatedConf>-
Hard handover (HHO) decision counter is decremented by stepdown when the
stepDown FastAlarmHardHoConf 3 RNC <HoConfClass>-<UsHoConf>- none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] N.A. Integer 0 20 2 25757 Fast Alarm Handover triggering UA4.1
downlink quality HHO criterion based on CpichRSCP or CpichEc/N0 is not hit.
<FastAlarmHardHoConf>
This parameter defines the duration before there is a change in the level of class
<RadioAccessService>-<AutomatedCellBarring>- barring. At the end of the timer, there will an increase or decrease in the number
stepIntervalTime CoreNetworkOverload 3 RNC none expert_tuning Radio Load Management Cell Barring s Integer 1 1000 155 31805 Automatic Cell Barring on Service Outage UA5.0
<CoreNetworkOverload> of barred classes. Used fornalgorithm mode 2.
The minimum value must be greater than tim
This parameter defines the duration before there is a change in the level of class
<RadioAccessService>-<AutomatedCellBarring>- barring. At the end of the timer, there will be an increase or decrease in the
stepIntervalTime OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring s Integer 1 1000 155 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion> number of barred classes. Used for algorithm mode 2;
The minimum value must be greater than
if Core Network overload situation prevails after stepIntervalTime then
<RadioAccessService>-<AutomatedCellBarring>- Manual Overload control at NodeB granularity
stepSize CoreNetworkOverload 3 RNC none expert_tuning Radio Call Admission Control ACB percentage of access classes barred is increased by this step (for both PS and % Integer 0 100 10 10 98448 LR13.1
<CoreNetworkOverload> (Class barring enhancement)
CS)
if RNC/TMU overload situation prevails after stepIntervalTime then percentage of
<RadioAccessService>-<AutomatedCellBarring>- Manual Overload control at NodeB granularity
stepSize OverloadCongestion 3 RNC none expert_tuning Radio Call Admission Control ACB access classes barred is increased by this step (for both PS and CS) % Integer 0 100 10 10 98448 LR13.1
<OverloadCongestion> (Class barring enhancement)
<RadioAccessService>-<DedicatedConf>-
Hard handover (HHO) decision counter is incremented by stepup when the
stepUp FastAlarmHardHoConf 3 RNC <HoConfClass>-<UsHoConf>- none system_restricted Radio Mobility [HHO][IntraFreq InterRnc] N.A. Integer 0 20 1 25757 Fast Alarm Handover triggering UA4.1
downlink quality HHO criterion based on CpichRSCP or Cpich Ec/N0 is hit.
<FastAlarmHardHoConf>
UTRAN Self Optimisation (CPICH auto
stopTime SonSession 3 RNC <RadioAccessService>-<SonSession> none customer_setting Radio Power Management [Common Channels] The date and time of the stop of the SON session Float 0.00 24.00 0.01 24.00 123989 LR Future
adjustment)
<RNC>-<NodeB>-<FDDCell>- This parameter indicates whether Space Time Transmit Diversity (STTD) is
sttdIndicator MbmsResourceClass2 2 RNC partial system_restricted Radio Broadcast Services MBMS N.A. Enumerate inactive 31868 MBMS Broadcast UA7.1
<MbmsResourceClass2> activated within the cell
TS 25.433 STTD Indicator
sttdIndicator NodeB 0 RNC <RNC>-<NodeB> partial system_restricted Radio Broadcast Services MBMS N.A. Boolean FAUX 28016 3GPP compliant NBAP (multi-vendor) UA5.0
it indicates if Space Time Transmit Diversity (STTD) is activated or not
sttdIndicator SCCPCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH> partial system_restricted Radio Broadcast Services MBMS Indicate if the Space Time Transmit Diversity is activated on SCCPCH N.A. Enumerate inactive 28016 3GPP compliant NBAP (multi-vendor) UA5.0
This parameter contributes to the definition of IPV4 routes to reach the Node B
<BTSEquipment>-<IpRan>-<RoutingTable>- targets, like:- the RNC CP,- the RNC UP,- Time server 1- Timer server 2A route IPv6 Support for OAM Traffic on the NodeB
subnetIpAddress IpV4Route 3 BTS none customer_init Transport IP N.A. IP4Address N.A. 108956 LR Future
<IpV4Route> definition is composed of 3 entries:- Subnet IP address,- Subnet mask (will be (OneBTS)
equal to 255.255.
This parameter contributes to the definition of IPV4 subnets used for IP address
<BTSEquipment>-<IpRan>-<IpFilteringTable>- SSH/sFTP support in the iBTS and IP address
subnetIpAddress IpV4Subnet 3 BTS none customer_init Transport IP source filtering, with subnet mask and type of traffic. This parameter applies for N.A. IP4Address N.A. 111416 LR Future
<IpV4Subnet> source filtering on Node B & RNC
both Hybrid Iub and Native IP V4 Iub.
This parameter contributes to the definition of IPV6 routes to reach the IPV6
<BTSEquipment>-<IpRan>-<RoutingTable>- Node B targets. A route definition is an IPV6 address with prefix length and IPv6 Support for OAM Traffic on the NodeB
subnetIpAddress IpV6Route 3 BTS none customer_init Transport IP N.A. IP6Address N.A. 108956 LR Future
<IpV6Route> Nexthop IP address. This parameter is the first entry (subnet IP address).This (OneBTS)
parameter applies for
This parameter contributes to the definition of IPV6 subnets used for IP address
<BTSEquipment>-<IpRan>-<IpFilteringTable>- SSH/sFTP support in the iBTS and IP address
subnetIpAddress IpV6Subnet 3 BTS none customer_init Transport IP source filtering, with prefix length and type of traffic. This parameter applies for N.A. IP6Address N.A. 111416 LR Future
<IpV6Subnet> source filtering on Node B & RNC
IPV6 Native IP Iub.
This parameter contributes to the definition of IPV4 routes to reach the Node B
<BTSEquipment>-<IpRan>-<RoutingTable>- targets, like:- the RNC CP,- the RNC UP,- Time server 1- Timer server 2A route IPv6 Support for OAM Traffic on the NodeB
subnetMask IpV4Route 3 BTS none customer_init Transport IP N.A. IP4Address N.A. 108956 LR Future
<IpV4Route> definition is composed of 3 entries:- Subnet IP address,- Subnet mask (will be (OneBTS)
equal to 255.255.
This parameter contributes to the definition of IPV4 subnet used for IP source
<BTSEquipment>-<IpRan>-<IpFilteringTable>- SSH/sFTP support in the iBTS and IP address
subnetMask IpV4Subnet 3 BTS none customer_init Transport IP address filtering with subnet IP address and Type of traffic. This parameter N.A. IP4Address N.A. 111416 LR Future
<IpV4Subnet> source filtering on Node B & RNC
applies for both Hybrid Iub and Native IP V4 Iub.
subnet mask of the IP address (if present) to be used at Node B side for UL
subnetMask VirtualInterface 0 BTS <BTSEquipment>-<IpRan>-<VirtualInterface> critical expert_tuning Transport IP N.A. IP4Address N.A. 79362 Flexible Operator Configurable Split IP Iub UA8.1
traffic for the traffic flow associated to the considered VirtualInterface.
External Document
subNetworkAddress SiteLan 3 BTS <BTSEquipment>-<SiteLan> none customer_setting Radio Design Page 58
Definition of the subNetwork connected beyond the BTS (IP address notation) N.A. IP4Address N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Definition of the sub network mask connected beyond the BTS (IP address
notation)
IETF RFC 922 & 1878
subNetworkMaskOfSiteLan SiteLan 3 BTS <BTSEquipment>-<SiteLan> none customer_setting Radio Design N.A. IP4Address N.A. 13490 Monitoring of OEMeqt through CCM 10BT UA4.0
The network mask strips the network ID from the IP address, leaving only the
host ID.
The network mask is what performs all the local magic of div
This parameter is used to indicate the alarm detection logic for each external
Alarm per Bts.
- bitx = 0 means activeState=open
supervisedExternalAlarmActiveStates BTSEquipment 3 BTS <BTSEquipment> none customer_setting BTS Alarms - bitx = 1 means activeState=close N.A. BitString 32 32 0 96374 Parameter and Alarm Mapping Gaps UA7.1.2
The value 0 indicates that the alarms are detected when the contact is opened
and the valu
supervisedExternalAlarmMask BTSEquipment 3 BTS <BTSEquipment> none customer_init Radio Design Mask (bit map) giving the operator external alarms that have to be supervised N.A. BitString 32 32 0 0 none UA1
supervisedExternalAlarmMask ExtensionCabinet 3 BTS <BTSEquipment>-<ExtensionCabinet> none system_restricted Radio Design N.A. BitString 16 16 1,11111E+15 32021 UMTS rBTS 6100 UA5.1
This parameter is used to indicate the alarm detection logic for each external
Alarm per RRH.
- bitx = 0 means activeState=open
supervisedRRHExternalAlarmActiveStates RemoteRadioHead 3 BTS <BTSEquipment>-<RemoteRadioHead> none customer_setting BTS Alarms - bitx = 1 means activeState=close N.A. BitString 16 16 0 96374 Parameter and Alarm Mapping Gaps UA7.1.2
The value 0 indicated that the alarms are detected when the contact is opened
and the valu
Mask (bit map) of the operator external alarms that have to be supervised
The least significant bit (lsb) represents “external alarm 1”
supervisedRRHExternalAlarmMask RemoteRadioHead 3 BTS <BTSEquipment>-<RemoteRadioHead> none system_restricted Radio Design The most significant bit (msb) represents “external alarm 16”
N.A. BitString 16 16 0 29928 UMTS dBTS 2U UA4.3K
In this mask, setting a bit to 0 means masking the c
supervisedUserAlarmMask BTSEquipment 3 BTS <BTSEquipment> none customer_init Radio Design Mask (bit map - 32 bit) giving the USER rack alarms that have to be supervised N.A. BitString 32 32 0 0 none UA1
supervisedUserAlarmMask ExtensionCabinet 3 BTS <BTSEquipment>-<ExtensionCabinet> none system_restricted Radio Design N.A. BitString 8 8 11111111 32021 UMTS rBTS 6100 UA5.1
A margin used in the computation of supervision timer of calls in cell-DCH without Ue Audit Improvement: Tsuperv Timer too long
supervTimerMarginCellDchNpm RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Load Management UE call audit s Integer 0 2147483647 180 Q00813896 LR Future
periodic measurements. - separate Cell_DCH and Cell_FACH cases
A margin used in the computation of supervision timer of calls in cell-DCH with Ue Audit Improvement: Tsuperv Timer too long
supervTimerMarginCellDchPm RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Load Management UE call audit s Integer 0 2147483647 10 Q00813896 LR Future
periodic measurements. - separate Cell_DCH and Cell_FACH cases
This parameter indicates whether the Establishment Cause and Traffic Volume
supportEstabCauseAndTrafficVolInd RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio PS Call management Always-on Indicator functionalities introduced in this feature are N.A. Boolean FAUX 108389 Direct PCH to DCH Transition UA8.1
activated on the RNC.
ATM Forum: af-tm-0056.000 April 1996 "Traffic Management Specification"
cells/se
sustainableCellRate VCC 3 BTS <BTSEquipment>-<VCC> none customer_tuning Transport ATM It is included in Traffic Descriptor parameters for Iub interface. It is the rate that a Integer 0 2147483647 N.A. 0 none UA1.0
c
burst ON-OFF traffic source can send. The worst case is a source sending Max
Burst Size cel
This parameter defines the list of synchronization methods ranked by operator
synchronizationMethodList BTSEquipment 3 BTS <BTSEquipment> none system_restricted Transport Synchronisation Iub Synchronisation N.A. Enumerate N.A. 34455 NodeB synchronisation for all IP UA7.1
preference order (from most liked to least liked).
Indicates which type of synchronisation protocol is used. For this release only the Additional GPS receiver support for Node-B
synchroProtocol SatelliteData 2 BTS <BTSEquipment>-<SatelliteData> partial customer_setting Radio Unused N.A. Enumerate M12 98839 Cancelled
M12 protocol is supported. Syncronization
Defines the time interval to wait for UL SYNC frames that are answers to periodic
syncWaitInterval DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Synchronisation Iub Synchronisation ms Integer 10 1000 100 0 none UA2.1
DL SYNC frames.
Interval between two rrcSystemInformationChangeNotification messages in the Management of system information change:
sysInfoChangeFachNotificationInterval FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Channels & Bearers SIB ms Integer 100 500 100 300 26228 UA4.1
event of repetition. notification to UE
Controls the number of times the
RRC_SYSTEM_INFORMATION_CHANGE_INDICATION message is repeated Management of system information change:
sysInfoChangeFachNotificationRepetitions FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Channels & Bearers SIB N.A. Integer 0 4 2 26228 UA4.1
(notifications of mobiles in CELL_FACH mode when the System Information of a notification to UE
cell has changed). If it is set to 0 then there is no repetition on this cell, only
Controls the number of DRX cycles during which the paging type 1 are repeated
Drx Management of system information change:
sysInfoChangePagingRepetitions FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio Channels & Bearers SIB (notifications of mobiles in IDLE mode when the System Information of a cell has Integer 0 7 3 26228 UA4.1
cycles notification to UE
changed). If it is set to 0 then there is no repetition of the paging on this cell.
TS 25.331 T300
This timer starts at the transmission of RRC CONNECTION REQUEST and stops
t300 UeTimerCstIdleMode 3 RNC <RadioAccessService>-<UeTimerCstIdleMode> none expert_tuning Radio Protocols RRC Timers N.A. Enumerate ueTimerIdle1200MS 16717 RRC States Management UA3.0
at the reception of RRC CONNECTION SETUP. At its expiry, the mobile must
retransmit RRC CONNECTION REQUEST if V300 =< N300, else go to Idle mode
TS 24.008 T301
<RadioAccessService>- It is a call control timer.
t301 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers N.A. Enumerate ueTimerConn2000MS 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> This timer starts when a ALERTING message is received and stops when the UE
receives CONN message. At expiry, the call is cleared.
TS 25.331 T302
This timer starts at the transmission of CELL UPDATE/URA UPDATE and stops
<RadioAccessService>-
t302 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers at the reception of of CELL UPDATE CONFIRM/URA UPDATE CONFIRM. At its N.A. Enumerate ueTimerConn400MS 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
expiry, the mobile must retransmit CELL UPDATE/URA UPDATE if V302 =<
N302, else, go to Idle mod
TS 25.331 T304
This timer starts at the transmission of UE CAPABILITY INFORMATION and
<RadioAccessService>-
t304 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers stops at the reception of UE CAPABILITY INFORMATION CONFIRM. At its N.A. Enumerate t304_2000 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
expiry, the mobile must retransmit UE CAPABILITY INFORMATION if V304 =<
N304, else initiate a cell u
TS 25.331 T305
This timer starts when the mobile is entering in CELL_FACH or URA_PCH or
<RadioAccessService>-
t305 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers CELL_PCH state at the reception of CELL UDPATE CONFIRM/URA UPDATE N.A. Enumerate ueConst5 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
CONFIRM, and stops whenthe UE is entering in another state. At the expiry, the
UE transmits CELL UPD
TS 25.331 T307
<RadioAccessService>- This timer starts when the timer T305 has expired and the UE detects "out of
t307 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers N.A. Enumerate t307_30 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> service area", and stops when the UE detects "in service area". At its expiration,
the UE moves to idle mode.
TS 25.331 T308
<RadioAccessService>- This timer starts at the transmission of RRC CONNECTION RELEASE. At its
t308 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers N.A. Enumerate t308_40 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> expiry, the mobile must transmit RRC CONNECTION RELEASE COMPLETE if
V308 <=N308, else go to idle mode.
TS 25.331 T309
This timer starts upon reselection of a cell belonging to another radio access
<RadioAccessService>-
t309 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers system from connected mode, or reception of CELL CHANGE ORDER FROM s Integer 1 8 5 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
UTRAN message, and Successful establishment of a connection in the new cell.
At the expiry, t
TS 25.331 T310
This timer starts at the transmission of PUSCH CAPACITY REQUEST and stops
<RadioAccessService>-
t310 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers at the reception of PHYSICAL SHARED CHANNEL ALLOCATION. At its expiry, ms Integer 40 320 40 160 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
the mobile must transmit PUSCH CAPACITY REQUEST if V310 =< N310, else
procedure stops.
TS 25.331 T311
This timer starts at the transmission of PHYSICAL SHARED CHANNEL
<RadioAccessService>-
t311 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers ALLOCATION message with the CHOICE "PUSCH allocation" set to "PUSCH ms Integer 250 2000 250 2000 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
allocation pending".and stops at the reception of PHYSICAL SHARED CHANNEL
ALLOCATION message with CHOICE "
TS 25.331 T312
<RadioAccessService>- This timer starts when the UE starts to establish DCH, and stops when the UE
t312 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers s Integer 1 15 1 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> detects consecutive N312 "in sync" indication from L1. At its expiration, the
criteria for physical channel establishment failure is fulfilled.
TS 25.331 T312
This timer starts when the UE starts to establish DCH and stops when the UE
t312 UeTimerCstIdleMode 3 RNC <RadioAccessService>-<UeTimerCstIdleMode> none system_restricted Radio Protocols RRC Timers s Integer 1 15 1 16717 RRC States Management UA3.0
detects consecutive N312 in sync indication from L1.. At its expiration, the criteria
for physical channel establishment failure is fulfilled.
TS 25.331 T313
This timer starts when the UE detects consecutive N313 "out of sync" indication
<RadioAccessService>- from L1., and stops when the UE detects consecutive N315 "in sync" indication
t313 UeTimerCstConnectedMode 3 RNC none expert_tuning Radio Protocols RRC Timers s Integer 0 15 3 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> from L1. At its expiration, the criteria for Radio Link failure is fulfilled.
<RadioAccessService>- TS 25.331 T314 This timer starts when the criteria for radio link failure are
t314 UeTimerCstConnectedMode 3 RNC none expert_tuning Radio Retainability RRC Re-establishment N.A. Enumerate t314_8S 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> fulfilled, and stops when the Cell Update procedure has been completed.
<RadioAccessService>- TS 25.331 T315 This timer starts when the criteria for radio link failure are
t315 UeTimerCstConnectedMode 3 RNC none expert_tuning Radio Retainability RRC Re-establishment N.A. Enumerate t315_180S 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> fulfilled, and stops when the Cell Update procedure has been completed.
TS 25.331 T316
This timer starts when the UE detects "out of service area" in URA_PCH or
<RadioAccessService>-
t316 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers CELL_PCH state, and stops when the UE detects "in service area". At expiry, N.A. Enumerate t316_30S 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode>
the UE must initiate the cell update procedure if in service area is detected.
Otherwise
TS 25.331 T317
<RadioAccessService>- This timer starts When the T316 expires or when in CELL_FACH state, the UE
t317 UeTimerCstConnectedMode 3 RNC none system_restricted Radio Protocols RRC Timers N.A. Enumerate t315_180S 16717 RRC States Management UA3.0
<UeTimerCstConnectedMode> detects "out of service area", and stops when the UE detects "in service area".
At expiry, the UE moves to idle mode.
This timer is Started at the transmission of RRC Connection Request with cause
t318 UeTimerCstIdleMode 3 RNC <RadioAccessService>-<UeTimerCstIdleMode> none system_restricted Radio Broadcast Services MBMS ms Enumerate 750 31868 MBMS Broadcast UA7.1
MBMS reception and stopped at the reception of the RRC Connection Setup
<RadioAccessService>-<DedicatedConf>- it specifies the time the UE waits
t321 HsdschDrxInCellFachInfo 3 RNC none expert_tuning Radio Power Management FACH ms Enumerate 400 121209 Enhanced UE DRX in CELL_FACH LR14.2
<HsdpaCellClass>-<HsdschDrxInCellFachInfo> until initiating eDRX operation, in ms.
<RadioAccessService>- UE cannot trigger a SCRI whilst this
t323 UeTimerCstConnectedMode 3 RNC none customer_tuning Radio PS Call management Always-on N.A. Enumerate t323_30S 97425 Fast Dormancy for Smartphone battery saving UA8.1
<UeTimerCstConnectedMode> timer duration
<RadioAccessService>-<ServiceInit>- KPI - Support T351 & N351 and repeat RRC
t351 CallAccessPerformanceConf 3 RNC none system_restricted Radio Accessibility RNC Timers Timer to control the retransmission of the rrcConnectionSetup in msec. ms Enumerate 700 Q00833038 UA4.1
<CallAccessPerformanceConf> Connection Setup
<RadioAccessService>-<ServiceInit>- Timer to control the release of UE call context in msec.
t352 CallAccessPerformanceConf 3 RNC none expert_tuning Radio Accessibility RNC Timers ms Enumerate 2000 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf> This timer should match with T300 setting.
<RadioAccessService>-<ServiceInit>- Timer which starts at transmission of RbSetup and stops at reception of
t353 CallAccessPerformanceConf 3 RNC none system_restricted Radio Protocols RRC Timers ms Integer 1 15000 5000 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf> RbSetupComplete or RbSetupFailure
Timer which starts at transmission of ActiveSetUpdate and stops at reception of
<RadioAccessService>-<ServiceInit>-
t354 CallAccessPerformanceConf 3 RNC none system_restricted Radio Protocols RRC Timers ActiveSetUpdateComplete or ActiveSetUpdateFailure. At expiry Retransmit ms Integer 0 10000 0 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf>
ActiveSetUpdate and restart timer if V354 <= N354
<RadioAccessService>-<ServiceInit>- Timer which starts at transmission of ActiveSetUpdate and stops at reception of
t355 CallAccessPerformanceConf 3 RNC none system_restricted Radio Protocols RRC Timers ms Integer 1 10000 7000 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf> ActiveSetUpdateComplete or ActiveSetUpdateFailure
<RadioAccessService>-<ServiceInit>- Timer which starts at transmission of RrcConnectionRelease and stops at
t356 CallAccessPerformanceConf 3 RNC none system_restricted Radio Protocols RRC Timers ms Integer 1 10000 100 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf> reception of RrcConnectionReleaseComplete
<RadioAccessService>-<ServiceInit>- Timer which starts at transmission of RrcConnectionRelease and stops at
t357 CallAccessPerformanceConf 3 RNC none system_restricted Radio Protocols RRC Timers ms Integer 1 10000 800 32898 UA06 Parameter Evolution UA6.0
<CallAccessPerformanceConf> reception of RrcConnectionReleaseComplete
A neighboring cell is eligible as target for iMCTA if its relevant cell colors are
GsmIntelligentMultiCarrierTrafficA <RNC>-<GSMNeighbour>-<GSMCell>- lower (better) than this threshold. For example, if the threshold is yellow all intelligent Multi-Carrier Traffic Allocation
External Document
targetCellColourThreshold 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] Page 59 N.A. Enumerate Green 29415 UA5.0 Alcatel-Lucent
llocation <GsmIntelligentMultiCarrierTrafficAllocation> relevant target cell colors must be yellow or green. This color is taken into (iMCTA)
account when t
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
A neighboring LTE cell is eligible as target for iMCTA if its relevant cell colors are
LteIntelligentMultiCarrierTrafficAll <RNC>-<LteNeighbour>-<LteCell>- lower (better) than this threshold. For example, if the threshold is yellow all
targetCellColourThreshold 3 RNC none expert_tuning Radio Mobility LTE N.A. Enumerate Green 100894 UMTS to LTE Handover LR14.2
ocation <LteIntelligentMultiCarrierTrafficAllocation> relevant target cell colors must be yellow or green. This color is taken into
account wh
<RNC>-<UmtsNeighbouring>- A neighboring cell is eligible as target for iMCTA if its relevant cell colors are
UmtsNeighbouringIntelligentMultiC <UmtsNeighbouringRelation>- lower (better) than this threshold. For example, if the threshold is yellow all intelligent Multi-Carrier Traffic Allocation
targetCellColourThreshold 3 RNC none customer_tuning Radio Mobility [HHO][iMCTA] N.A. Enumerate Green 29415 UA5.0
arrierTrafficAllocation <UmtsNeighbouringIntelligentMultiCarrierTrafficAllo relevant target cell colors must be yellow or green. This color is taken into (iMCTA)
cation> account when t
This parameter indicates the target ratio of the received E-DCH power from non-
targetNonServingToTotalEdchPowerRatio FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio HSUPA Mobility % Integer 0 100 100 32076 E-DCH Macro Diversity Support UA6.0
serving UEs to the received E-DCH power.
This parameter represents the target queue size that the mac-C would like to
keep for each priority queue.
<RadioAccessService>-<DedicatedConf>-
targetQueueSize CommonPriorityQueue 3 RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none expert_tuning Radio Power Management FACH Unit is in Mac-C SDUs. N.A. Integer 0 255 64 Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<CommonPriorityQueue>
TRB uses flexible RLC PDU size, the actual target queue size in octets equals
targetQueuSize x macEhsReferencePduSizeCellFa 168710
<RNC>-<CellProfiles>- TS 25.331
tBarred CellAccessRestriction 3 RNC <CellAccessRestrictionProfile>- none customer_tuning Radio Load Management Cell Barring After expiry of this time interval, the UE shall check again whether the status of s Enumerate barredS160 13452 3G to 2G Cell Reselection UA2.0
<CellAccessRestriction> the barred cell has changed.
<RNC>-<CellProfiles>- TS 25.331
CellAccessRestrictionConnected Enhancements for Call Setup in Cell FACH
tBarred 3 RNC <CellAccessRestrictionProfile>- none customer_tuning Radio Load Management Cell Barring After expiry of this time interval, the UE shall check again whether the status of s Enumerate barredS160 Q00852432 UA5.0
Mode mode
<CellAccessRestrictionConnectedMode> the barred cell has changed.
<RadioAccessService>-<DedicatedConf>-
This parameter is used for Enhanced Soft Shutdown procedure only. TS 25.331:
<ShutdownConfClass>-<EnhancedShutdownConf>-
tBarred ShutdownCellSelectionParams 3 RNC none expert_tuning Radio Power Management Shutdown After expiry of this time interval, the UE shall check again whether the status of s Enumerate barredS160 106905 Node B Soft Shutdown Evolution UA8.1
<Forced2GReselectionConf>-
the barred cell has changed.
<ShutdownCellSelectionParams>
Destination IP V4 address used for CT UDP traffic from LRCE to TCE.
This parameter is significant only for LRCE and may be present for LRCE / is not
tceIpV4Address CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial customer_init Radio Call Trace N.A. IP4Address N.A. 162427 LRCE 3G Call Trace (End-to-End) LR Future
significant for RNC 9370 and may be absent for RNC 9370.
For LRCE this parameter is significant only if
Destination IP V6 address used for CT UDP traffic from LRCE to TCE.
This parameter is significant only for LRCE and may be present for LRCE / is not
tceIpV6Address CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial customer_init Radio Call Trace N.A. IP6Address N.A. 162427 LRCE 3G Call Trace (End-to-End) LR Future
significant for RNC 9370 and may be absent for RNC 9370.
For LRCE this parameter is significant only if
25.433 T_Cell
tCell FDDCell 2 RNC <RNC>-<NodeB>-<FDDCell> partial expert_tuning Radio Design Timing delay used for defining start of SCH, CPICH and the DL scrambling N.A. Integer 0 9 N.A. 0 none UA2.1
code(s) in a cell relative BFN.
Destination UDP port number used for CT UDP traffic from LRCE to TCE.
This parameter is significant only for LRCE / not significant for RNC 9370.
tceUdpPortNumber CallTraceConfClass 3 RNC <RNC>-<CallTraceConfClass> partial expert_tuning Radio Call Trace N.A. Integer 0 65535 1 11981 162427 LRCE 3G Call Trace (End-to-End) LR Future
For LRCE this parameter is significant only if parameter
isCallTraceDataUdpStreamingToTceEnabled is set to
tcnResetAck CsCoreNetworkAccess 3 RNC <RNC>-<CsCoreNetworkAccess> none system_restricted Radio Protocols Guard period before RNC repeats an UL reset to CS. ms Integer 0 2147483647 120000 0 none UA1
tcnResetAck PsCoreNetworkAccess 3 RNC <RNC>-<PsCoreNetworkAccess> none system_restricted Radio Protocols Guard period before RNC repeats an UL reset to PS. ms Integer 0 2147483647 120000 0 none UA1
NbapCommonMeasConfigForCall <RNC>-<ObjectTrace>-<CellSession>-
tcpReportPeriodicity 0 RNC partial system_restricted Radio Call Trace TCP reporting interval ms Integer 500 60000 500 2000 34583 UA07 Call Trace Development UA7.0
Trace <NbapCommonMeasConfigForCallTrace>
NbapCommonMeasConfigForCall <RNC>-<ObjectTrace>-<CellSession>-
tcpRequired 0 RNC partial system_restricted Radio Call Trace Indicate if TCP is present in the NBAP dedicated measurements for Call Trace. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <NbapCommonMeasConfigForCallTrace>
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
tCrMax CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Duration for evaluating allowed amount of cell re-selection(s) s Enumerate N.A. 29816 UA5.0
<CellSelectionInfo>-<CrMgt> Structure (HCS)
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
tCrMax CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Duration for evaluating allowed amount of cell re-selection(s) s Enumerate N.A. 29816 UA5.0
<CellSelectionInfoConnectedMode>-<CrMgt> Structure (HCS)
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
tCrMaxHyst CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Additional time period before UE can revert to low-mobility measurements. s Enumerate NotUsed 29816 UA5.0
<CellSelectionInfo>-<CrMgt> Structure (HCS)
<RNC>-<CellProfiles>-<CellSelectionProfile>- Cell reselection control in a Hierarchical Cell
tCrMaxHyst CrMgt 3 RNC none expert_tuning Radio Mobility [Cell Selection] Additional time period before UE can revert to low-mobility measurements. s Enumerate NotUsed 29816 UA5.0
<CellSelectionInfoConnectedMode>-<CrMgt> Structure (HCS)
<RNC>-<NodeB>-<FDDCell>-
Scheme2Cdma1xCellSelectionInf
tdBOff 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] Default search interval while on CDMA (coming back from UMTS failure) N.A. Enumerate 60 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme2Cdma1xCellSelectionInfo>
This parameter is the RAB inactivity time applied when multiple I/B RABs exist to
<RadioAccessService>-<AlwaysOnConf>- transition a UE into Cell/URA PCH. Upon detection of inactivity, the RNC performs
tDchPchMpdpForDchAndDch RabInactivity 3 RNC none customer_tuning Radio PS Call management MPDP s Integer 0 65535 30 34170 3 PDP contexts support in UTRAN UA6.0
<AlwaysOnTimer>-<RabInactivity> the state transition. A setting of 0 means that the timer is disabled. There is one
specifi
This parameter is the RAB inactivity time applied when multiple I/B RABs exist to
<RadioAccessService>-<AlwaysOnConf>- transition a UE into Cell/URA PCH. Upon detection of inactivity, the RNC performs
tDchPchMpdpForHsdpaAndDch RabInactivity 3 RNC none customer_tuning Radio PS Call management MPDP s Integer 0 65535 30 34170 3 PDP contexts support in UTRAN UA6.0
<AlwaysOnTimer>-<RabInactivity> the state transition. A setting of 0 means that the timer is disabled. There is one
specifi
This parameter is the RAB inactivity time applied when multiple I/B RABs exist to
transition a UE into Cell/URA PCH. Upon detection of inactivity, the RNC performs
<RadioAccessService>-<AlwaysOnConf>-
tDchPchMpdpForHsdpaAndEdch RabInactivity 3 RNC none customer_tuning Radio PS Call management MPDP the state transition.
s Integer 0 65535 30 34170 3 PDP contexts support in UTRAN UA6.0
<AlwaysOnTimer>-<RabInactivity>
A setting of 0 means that the timer is disabled.
There is one speci
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>- Minimum delay between successive emission by RNC of a RRC MEASUREMENT
tdelayBetweenGpsAssistanceDataSegments 3 RNC none system_restricted Radio Location Services ms Integer 10 20000 100 22842 Network Assisted GPS Enhancements UA4.1
gy <AGPSUeBasedLocationTechnology> CONTROL message including GPS assistance data
Activates Total E-DCH Buffer Status filtering algorithm in the scheduler.
tebsThresholdSmartEdchResourceUsageActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSUPA Congestion Control N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
Meaningful only if smartEdchResourceUsageActivation is True
<RNC>-<NodeB>-<FDDCell>-
Offset applied to the H and R criteria for a neighbouring cell for the duration of Cell reselection control in a Hierarchical Cell
temporaryOffset1 GsmHcsTemporaryOffsets 3 RNC <GsmNeighbouringCell>- none customer_tuning Radio Mobility [Cell Selection] dB Enumerate 9 29816 UA5.0
penaltyTime Structure (HCS)
<GsmHcsTemporaryOffsets>
<RNC>-<NodeB>-<FDDCell>-
GsmNeighbouringHcsTemporary <GsmNeighbouringCell>- Offset applied to the H and R criteria for a neighbouring cell for the duration of
temporaryOffset1 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Enumerate 9 33820 Broadcast of SIB12 UA6.0
Offsets <GsmCellSelectionInfoConnMode>- penaltyTime
<GsmNeighbouringHcsTemporaryOffsets>
<RNC>-<UmtsNeighbouring>-
UmtsNeighbouringHcsTemporary <UmtsNeighbouringRelation>- Offset applied to the H and R criteria for a neighbouring cell for the duration of Cell reselection control in a Hierarchical Cell
temporaryOffset1 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Enumerate 9 29816 UA5.0
Offsets <FddNeighCellSelectionInfoConnectedMode>- penaltyTime Structure (HCS)
<UmtsNeighbouringHcsTemporaryOffsets>
<RNC>-<UmtsNeighbouring>-
UmtsNeighbouringHcsTemporary Offset applied to the H and R criteria for a neighbouring cell for the duration of Cell reselection control in a Hierarchical Cell
temporaryOffset1 3 RNC <UmtsNeighbouringRelation>- none customer_tuning Radio Mobility [Cell Selection] dB Enumerate 9 29816 UA5.0
Offsets penaltyTime Structure (HCS)
<UmtsNeighbouringHcsTemporaryOffsets>
<RNC>-<UmtsNeighbouring>-
UmtsNeighbouringHcsTemporary <UmtsNeighbouringRelation>- Offset applied to the H and R criteria for a neighbouring cell for the duration of Cell reselection control in a Hierarchical Cell
temporaryOffset2 3 RNC none customer_tuning Radio Mobility [Cell Selection] dB Enumerate 6 29816 UA5.0
Offsets <FddNeighCellSelectionInfoConnectedMode>- penaltyTime. Structure (HCS)
<UmtsNeighbouringHcsTemporaryOffsets>
<RNC>-<UmtsNeighbouring>-
UmtsNeighbouringHcsTemporary Offset applied to the H and R criteria for a neighbouring cell for the duration of Cell reselection control in a Hierarchical Cell
temporaryOffset2 3 RNC <UmtsNeighbouringRelation>- none customer_tuning Radio Mobility [Cell Selection] dB Enumerate 6 29816 UA5.0
Offsets penaltyTime. Structure (HCS)
<UmtsNeighbouringHcsTemporaryOffsets>
UARFCN (UTRA Absolute Radio Frequency Channel Number of the Down Link
Frequency used by the BTS to detect its RF cabling: Nd = 5 * (Fdownlink
testFrequencyList NodeBCommonParam 0 OAM critical system_restricted Radio Design MHz).
N.A. Integer 0 16383 N.A. 18855 UTRAN Sharing UA3.1
For UMTS Band, valid values are in [10562 ,10838].
For UMTS1900, valid values are 412, 437, 462, 487, 5
Indicates whether the TFCI shall be included. The IE shall be present if the
tfciPresence SccpchClass 0 RNC <RadioAccessService>-<SccpchClass> critical system_restricted Radio Channels & Bearers SCCPCH N.A. Enumerate N.A. 16717 RRC States Management UA3.0
secondary CCPCH Slot Format IE is set to any of the values from 8 to 17.
This parameter is used to determine the TGCFN corresponding to the connection
Frame Number of the first frame of the first pattern within the Transmission Gap 3G to 2G Handover with GSM measurements
tgcfnOffset CModePatternSeqInfo 3 RNC <RadioAccessService>-<CModePatternSeqInfo> none expert_tuning Radio Mobility Compressed Mode frames Integer 0 255 N.A. 13447 UA2.0
Pattern Sequence, according to the formula:
(With and without Compressed Mode)
TGCFN=(CmodeDeltaCfn+ TGCFNOffset) mod256
TS 25.331 TGD
Transmission gap distance indicates the number of slots between the starting 3G to 2G Handover with GSM measurements
tgd CModePatternSeqInfo 3 RNC <RadioAccessService>-<CModePatternSeqInfo> none expert_tuning Radio Mobility Compressed Mode N.A. Integer 0 269 0 13447 UA2.0
slots of two consecutive transmission gaps within a transmission gap pattern. If (With and without Compressed Mode)
there is only one transmission gap in the transmission gap pattern, this parameter
TS 25.331 TGL1
3G to 2G Handover with GSM measurements
tgl1 CModePatternSeqInfo 3 RNC <RadioAccessService>-<CModePatternSeqInfo> none expert_tuning Radio Mobility Compressed Mode The length of the first Transmission Gap within the transmission gap pattern N.A. Integer 0 14 N.A. 13447 UA2.0
(With and without Compressed Mode)
expressed in number of slots
TS 25.331 TGL2
The length of the second Transmission Gap within the transmission gap pattern. If 3G to 2G Handover with GSM measurements
tgl2 CModePatternSeqInfo 3 RNC <RadioAccessService>-<CModePatternSeqInfo> none expert_tuning Radio Mobility Compressed Mode N.A. Integer 0 14 N.A. 13447 UA2.0
omitted, then TGL2=TGL1, expressed in number of slots.
(With and without Compressed Mode)
The value 0 means undefined.
TS 25.331 TGMP
3G to 2G Handover with GSM measurements
tgmp CModePatternSeqInfo 3 RNC <RadioAccessService>-<CModePatternSeqInfo> none expert_tuning Radio Mobility Compressed Mode N.A. Enumerate N.A. 13447 UA2.0
Transmission Gap pattern sequence Measurement Purpose. (With and without Compressed Mode)
<RadioAccessService>-<DedicatedConf>-
Delta value of the requested threshold of Transmitted code power to configure an
thresholdDelta DlAmrRateIncreaseTxcpTrigger 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio Speech Call Management AMR dB Float 0 56,5 0,5 0 27805 AMR mode change during the call UA5.0
Event B NBAP dedicated measurement.
<DlAmrRateIncreaseTxcpTrigger>
<RadioAccessService>-<DedicatedConf>- This parameter defines the delta value of the threshold of Transmitted Code
thresholdDelta DlIrmSchedDowngradeTxcp 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio PS Call management iRM Scheduling Power to apply to determine the suitable TxCP threshold required to configure an dB Float 0 56,5 0,5 2 30172 iRM Scheduling : Iur support UA5.0
<DlIrmSchedDowngradeTxcp> EventA NBAP dedicated measurement.
<RadioAccessService>-<DedicatedConf>-
Delta value of the requested threshold of Transmitted code power to configure an
thresholdDeltaStart DlAmrRateDecreaseTxcpTrigger 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio Speech Call Management AMR dB Float 0 56,5 0,5 1 32687 AMR mode change during the call - evolution UA6.0
Event B NBAP dedicated measurement.
<DlAmrRateDecreaseTxcpTrigger>
<RadioAccessService>-<DedicatedConf>-
Delta value of the requested threshold of Transmitted code power to configure an
thresholdDeltaStart DlAmrRateIncreaseTxcpTrigger 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio Speech Call Management AMR dB Float 0 56,5 0,5 4 32687 AMR mode change during the call - evolution UA6.0
Event B NBAP dedicated measurement.
<DlAmrRateIncreaseTxcpTrigger>
<RadioAccessService>-<DedicatedConf>-
Delta value of the requested threshold of Transmitted code power to configure an
thresholdDeltaStop DlAmrRateDecreaseTxcpTrigger 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio Speech Call Management AMR dB Float 0 56,5 0,5 2 32687 AMR mode change during the call - evolution UA6.0
Event B NBAP dedicated measurement.
<DlAmrRateDecreaseTxcpTrigger>
<RadioAccessService>-<DedicatedConf>-
Delta value of the requested threshold of Transmitted code power to configure an
thresholdDeltaStop DlAmrRateIncreaseTxcpTrigger 3 RNC <PowerConfClass>-<DlUsPowerConf>- none expert_tuning Radio Speech Call Management AMR dB Float 0 56,5 0,5 3 32687 AMR mode change during the call - evolution UA6.0
Event B NBAP dedicated measurement.
<DlAmrRateIncreaseTxcpTrigger>
Threshold to define a macro cell
thresholdMacro RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility LTE N.A. Float 0.0 50.0 0.1 46.0 100894 UMTS to LTE Handover LR14.2
If maxTxPower >= ThresholdMacro then cell type = Macro
Threshold to define a micro cell
thresholdMicro RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility LTE N.A. Float 0.0 50.0 0.1 43.0 100894 UMTS to LTE Handover LR14.2
If ThresholdMacro > maxTxPower >= ThresholdMicro then cell type = Micro
<RadioAccessService>-<DedicatedConf>-
thresholdOtherSystemEcIo Cdma1xEvent3a 3 RNC <MeasurementCdma1xConfClass>- none customer_tuning Radio Mobility [HHO][CDMA] dB Float -31,5 0 0,5 0 33853 Support of WCDMA to CDMA Handover UA4.1K
<Cdma1xEvent3a>
<RadioAccessService>-<DedicatedConf>-
thresholdOtherSystemRscp Cdma1xEvent3a 3 RNC <MeasurementCdma1xConfClass>- none customer_tuning Radio Mobility [HHO][CDMA] dBm Integer -115 -25 -115 33853 Support of WCDMA to CDMA Handover UA4.1K
<Cdma1xEvent3a>
<RadioAccessService>-<DedicatedConf>-
thresholdOwnSystemEcNo Cdma1xEvent3a 3 RNC <MeasurementCdma1xConfClass>- none customer_tuning Radio Mobility [HHO][CDMA] dB Integer -24 0 -12 33853 Support of WCDMA to CDMA Handover UA4.1K
<Cdma1xEvent3a>
<RadioAccessService>-<DedicatedConf>-
thresholdOwnSystemRscp Cdma1xEvent3a 3 RNC <MeasurementCdma1xConfClass>- none customer_tuning Radio Mobility [HHO][CDMA] dBm Integer -115 -25 -115 33853 Support of WCDMA to CDMA Handover UA4.1K
<Cdma1xEvent3a>
Threshold to define a pico cell
thresholdPico RadioAccessService 3 RNC <RadioAccessService> none customer_setting Radio Mobility LTE N.A. Float 0.0 50.0 0.1 30.0 100894 UMTS to LTE Handover LR14.2
If ThresholdMacro > maxTxPower >= ThresholdMicro then cell type = pico
DlAmrRateDecreaseAbsoluteTxc <RadioAccessService>-<DlUserService>-
thresholdStart 3 RNC none expert_tuning Radio Speech Call Management AMR dBm Float -10 46 0,5 2 32687 AMR mode change during the call - evolution UA6.0
pTrigger <DlAmrRateDecreaseAbsoluteTxcpTrigger>
DlAmrRateIncreaseAbsoluteTxcp <RadioAccessService>-<DlUserService>-
thresholdStart 3 RNC none expert_tuning Radio Speech Call Management AMR dBm Float -10 46 0,5 11 32687 AMR mode change during the call - evolution UA6.0
Trigger <DlAmrRateIncreaseAbsoluteTxcpTrigger>
DlAmrRateDecreaseAbsoluteTxc <RadioAccessService>-<DlUserService>-
thresholdStop 3 RNC none expert_tuning Radio Speech Call Management AMR dBm Float -10 46 0,5 5 32687 AMR mode change during the call - evolution UA6.0
pTrigger <DlAmrRateDecreaseAbsoluteTxcpTrigger>
DlAmrRateIncreaseAbsoluteTxcp <RadioAccessService>-<DlUserService>-
thresholdStop 3 RNC none expert_tuning Radio Speech Call Management AMR dBm Float -10 46 0,5 10 32687 AMR mode change during the call - evolution UA6.0
Trigger <DlAmrRateIncreaseAbsoluteTxcpTrigger>
This parameter defines the absolute value of the threshold of Transmitted Code
Power to apply to determine the suitable TxCP threshold required to configure an
<RadioAccessService>-<DlUserService>- iRM Scheduling upgrading based on radio
thresholdTransCodePower HighRbB1 3 RNC none expert_tuning Radio PS Call management iRM Scheduling - iur EventB (B1) NBAP
dBm Float -10 46 0,5 N.A. 23332 UA4.1
<IrmSchedulingUpgrade>-<HighRbB1> conditions
dedicated measurement on the primary cell of a PS call handle by a DRNC.
Rec
This parameter defines the absolute value of the threshold of Transmitted Code
<RadioAccessService>-<DlUserService>-
Power to apply to determine the suitable TxCP threshold required to configure an
thresholdTransCodePowerDefinitionParam LowRbA 3 RNC <IrmSchedulingDowngradeTransCodePower>- none expert_tuning Radio PS Call management iRM Scheduling dBm Float -10 46 0,5 N.A. 28144 iRM Scheduling downgrading based on TxCP UA4.2
EventA NBAP dedicated measurement on the primary cell of a PS call handle by
<LowRbA>
a DRNC.
<RadioAccessService>-<DedicatedConf>- Throughput threshold for counting an E-DCH user as active. If the measured UEs
thrThresholdForActiveState EdchTrafficActivity 3 RNC <HspaTrafficActivityDetectionConf>- none customer_tuning Radio HSUPA userActivity data rate at MAC-es layer is above this threshold, then the user is switched to Kbits/s Integer 0 5440 1 32 82602 E-DCH user and cell throughput increase UA8.1
<EdchTrafficActivity> active state (input for feature 34249).
Throughput threshold for counting an E-DCH user as inactive. If the measured
<RadioAccessService>-<DedicatedConf>-
UEs data rate at MAC-es layer falls below this threshold for a duration of
thrThresholdForInactiveState EdchTrafficActivity 3 RNC <HspaTrafficActivityDetectionConf>- none customer_tuning Radio HSUPA userActivity Kbits/s Integer 0 5440 1 16 82602 E-DCH user and cell throughput increase UA8.1
timeToTriggerForInactiveState, then the user is switched to inactive state (input
<EdchTrafficActivity>
for feature 34249).
<RNC>-<NodeB>-<FDDCell>-
Scheme1Cdma1xCellSelectionInf
tHw 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] Threshold of present WCDMA pilot strength for Idle roaming to WCDMA. dBm Integer -105 -85 -101 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme1Cdma1xCellSelectionInfo>
<RNC>-<CsCoreNetworkAccess>-
CSReceivingRanapOverloadContr
tIgOR 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP It is the Overload Control Ignore timer as defined in 3GPP 25.413. s Integer 0 65535 5 33804 Manual Overload Control UA5.0
ol
<CSReceivingRanapOverloadControl>
<RNC>-<PsCoreNetworkAccess>-
PSReceivingRanapOverloadContr
tIgOR 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP It is the Overload Control Ignore timer as defined in 3GPP 25.413. s Integer 0 65535 5 33804 Manual Overload Control UA5.0
ol
<PSReceivingRanapOverloadControl>
<RadioAccessService>-<AutomatedCellBarring>-
timeCellBarring CoreNetworkOverload 3 RNC none expert_tuning Radio Load Management Cell Barring This parameter defines delay between sending barring to the cells. s Integer 1 200 30 31805 Automatic Cell Barring on Service Outage UA5.0
<CoreNetworkOverload>
This parameter defines delay between sending barring to the cells. Applies to all
<RadioAccessService>-<AutomatedCellBarring>-
timeCellBarring IuFailure 3 RNC none expert_tuning Radio Load Management Cell Barring classes in the
s Integer 1 200 30 31805 Automatic Cell Barring on Service Outage UA5.0
<IuFailure>
cell. One cell is done on each TimeCellBarring period.
<RadioAccessService>-<AutomatedCellBarring>- This parameter defines the time interval used during sequential cell barring. It is
timeCellBarring ManualActivation 3 RNC none expert_tuning Radio Load Management Cell Barring s Integer 1 200 30 31805 Automatic Cell Barring on Service Outage UA5.0
<ManualActivation> used for pacing how fast the class restriction is applied to all the cells.
This parameter defines the time interval used during sequential cell barring. It is
<RadioAccessService>-<AutomatedCellBarring>-
timeCellBarring OverloadCongestion 3 RNC none expert_tuning Radio Load Management Cell Barring used for pacing
s Integer 1 200 30 31805 Automatic Cell Barring on Service Outage UA5.0
<OverloadCongestion>
how fast the class restriction is applied to all the cells.
<RadioAccessService>-<DlRbSetConf>- This parameter allows to supervise the response from the Core Network for a
timeOut IuCsTimingAlignment 3 RNC none system_restricted Radio Synchronisation Iu-CS Timing Alignment ms Integer 0 65535 N.A. 22788 Iu-CS Timing Alignment UA3.1
<IuCsTimingAlignment> specific time alignment request.
<RadioAccessService>-<DedicatedConf>- Used for Alarm handover criteria in full event mode.This timer is started on
timerAlarmHoEvent2D FullEventHOConfHhoMgt 3 RNC <HoConfClass>-<UsHoConf>- none expert_tuning Radio Mobility [HHO][IntraFreq InterRnc] reception of 2D event.If no 2F is received until the end of the timer, the alarm ms Integer 0 30000 0 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventHOConfHhoMgt> criteria is confirmed.
Used for Alarm handover criteria in full event mode. This Timer is started on
<RadioAccessService>-<DedicatedConf>-
reception of 6A event. If no 6B event is received when this timer expires, the
timerAlarmHoEvent6A FullEventHOConfHhoMgt 3 RNC <HoConfClass>-<UsHoConf>- none expert_tuning Radio Mobility [HHO] ms Integer 0 30000 2500 33331 Alarm HHO based on UE TX Power UA7.1
alarm criterion is confirmed. For a given DedicatedConf instance, the non
<FullEventHOConfHhoMgt>
activation of the Alarm
This timer is used to delay the BTS impact on all cell on detection of SSCOP
ALCAP disconnection.
timerAlcapCellValidity BTSEquipment 3 BTS <BTSEquipment> none system_restricted Transport ATM ALCAP The BTS will impact all cells when the ALCAP SSCOP has become disconnected s Integer 0 3600 0 28018 3GPP compliant Iub: Alcap UA6.0
for timerALCAPCellValidity seconds
Value 0 means “immediate”
Cell load exchange for I-RAT mobility from
timerBetweenTwoReportingsInSonTransfer FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility LTE Minimum time between 2 messages sent to an eNB for one RIM association. s Integer 1 86400 1 900 155968 LR13.1
LTE
This attribute specifies value of the timerBlo defined in Q.2630.1. (timer between
timerBlo Qaal2Params 3 BTS <BTSEquipment>-<Qaal2Params> none expert_tuning Transport ATM ALCAP s Integer 2 60 5 28018 3GPP compliant Iub: Alcap UA6.0
qaal2:BLO and qaal2: BLC)
This timer is the period at which the BTS tries to connect to OMC-B on the OAM
link.
timerBtsOmcbNeConnectRequest BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Design s Integer 20 600 180 0 none UA5.0
Note: decreasing this timer decreases the time for the BTS to reconnect to OMC-
B (after disconnection of the BTS-OMC-B OAM link). But it may increase the risk
of OMC-B
ITU Q2110
In the connection control phase, during establishment and release of a connection
timerCc NodeBSaalUniParams 0 RNC <RNC>-<NodeB>-<NodeBSaalUniParams> partial system_restricted Radio Protocols and during resynchronization or recovery, transmission of PDUs is protected by s Integer 0 65535 4 18855 UTRAN Sharing UA3.1
the Timer_CC. It determines the time between transmission of BGN (Begin PDU),
END (
Timer as defined in ITU Q2110
In the connection control phase, during establishment and release of a connection
timerCC SaalUniParams 3 BTS <BTSEquipment>-<SaalUniParams> none system_restricted Radio Protocols Configuration s Integer 1 5 2 28016 3GPP compliant NBAP (multi-vendor) UA5.0
and during resynchronization or recovery, transmission of PDUs is protected by
the TimerCC. It determines the time between transmission of BGN
The BTS will declare a BTS Cell disable (operational state disable) when all CCP
that can serve this BTS Cell have been disable during timerCellImpactNoCcp
seconds
timerCellImpactNoCcp BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Design s Integer 0 3600 35 0 none UA4.1
Value 0 means “immediate”
For example, in mono CCP configuration, the BTS will declare
This parameter indicates a Cnode waiting marge used to wait the morst case in
which the UE sends a successfull Cell Update message after T305+N302*T302
timerCellUpdateProcessingMarge RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Load Management UE call audit expiration.
s Integer 0 2147483647 330 16717 RRC States Management UA3.0
This marge allows to Cnode to determine the needed time for the reception of the
next Cell
Timer used to repeat NBAP common procedure (AuditRequired, ResetRequest) Parameter Class Evolution in UA08 & UTRAN
timerCommonNbap BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Protocols s Integer 5 300 40 80685 UA8.1
to RNC on non response from RNC. model simplification
indicates the maximum delay introduced by UDP Mux: when the first packet
candidate for UDP_Mux is received in the NodeB from air interface side, a
timerCu UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused ms Enumerate 5ms 89716 UDP multiplexing on Iub (iBTS) Cancelled
UDP_Mux frame is prepared, timerCu is started. The frame will be sent at the
earliest of the time when the U
indicates the maximum delay introduced by UDP Mux: when the first packet
candidate for UDP_Mux is received in the NodeB from air interface side, a
timerCu UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused ms Enumerate 5ms 89716 UDP multiplexing on Iub (iBTS) Cancelled
UDP_Mux frame is prepared, timerCu is started. The frame will be sent at the
earliest of the time when the U
<RadioAccessService>-<OverloadInfo>- pattern
timeReject Overload 3 RNC none system_restricted Radio Load Management RRC Overload Control Time the mobile should wait before next RRC_Connection_Request resending. Integer 0 15 15 33804 Manual Overload Control UA5.0
<RNCNodeOverloadControl>-<Overload> s
ITU Q2110
timerIdle NodeBSaalUniParams 0 RNC <RNC>-<NodeB>-<NodeBSaalUniParams> partial system_restricted Radio Protocols In idle phase, when upon receipt of a STAT (Solicited status) PDU, Timer_IDLE is s Integer 0 65535 40 18855 UTRAN Sharing UA3.1
started. At the expiry of Timer_IDLE, the transient phase is entered again.
Timer as defined in ITU Q2110
timerIdle SaalUniParams 3 BTS <BTSEquipment>-<SaalUniParams> none system_restricted Radio Protocols Configuration In idle phase, when upon receipt of a STAT (Solicited status) PDU, timerIdle is s Integer 1 60 2 28016 3GPP compliant NBAP (multi-vendor) UA5.0
started. At the expiry of timerIdle, the transient phase is entered again.
ITU Q2110
In the transient phase, When Timer_POLL expires (and the POLL PDU has been
timerKeepAlive NodeBSaalUniParams 0 RNC <RNC>-<NodeB>-<NodeBSaalUniParams> partial system_restricted Radio Protocols sent) and there are no outstanding acknowledgements or new data pending s Integer 0 65535 2 18855 UTRAN Sharing UA3.1
receipt of credit, the transient phase is entered and the Timer_KEEP-ALIVE is
started. The trans
Timer as defined in ITU Q2110
In the transient phase, When timerPoll expires (and the POLL PDU has been
timerKeepAlive SaalUniParams 3 BTS <BTSEquipment>-<SaalUniParams> none system_restricted Radio Protocols Configuration s Integer 1 60 2 28016 3GPP compliant NBAP (multi-vendor) UA5.0
sent) and there are no outstanding acknowledgements or new data pending
receipt of credit, the transient phase is entered and the timerKeepAlive is st
The BTS will declare internally delete all NBAP configuration from RNC when
timerNodeBCPCellValidity BTSEquipment 3 BTS <BTSEquipment> none system_restricted Radio Protocols NODEB-CP becomes disable during timerNodeBCPCellValidity seconds
s Integer 0 3600 0 27649 Native IP Iub support UA7.1
Value 0 means “immediate”
ITU Q2110
In active phase, in order to detect a broken connection, a Timer_NO RESPONSE
timerNoResponse NodeBSaalUniParams 0 RNC <RNC>-<NodeB>-<NodeBSaalUniParams> partial system_restricted Radio Protocols is running parallel to Timer_POLL; this timer indicates the maximum time interval s Integer 0 65535 20 18855 UTRAN Sharing UA3.1
during which at least one STAT PDU needs to be received. Failing this, the
External Document Page 61 Alcatel-Lucent
SSCOP conn
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the period during which the condition of the event 1C must
timeToTrigger1C FullEventHOConfShoMgtEvent1C 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 320 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventHOConfShoMgt>- be satisfied before sending a measurement report in full event mode
<FullEventHOConfShoMgtEvent1C>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the period during which the condition of the event 1D must
timeToTrigger1D FullEventHOConfShoMgtEvent1D 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 640 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventHOConfShoMgt>- be satisfied before sending a measurement report in full event mode
<FullEventHOConfShoMgtEvent1D>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the period during which the condition of the event 1E must
timeToTrigger1E FullEventHOConfShoMgtEvent1E 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 100 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventHOConfShoMgt>- be satisfied before sending a measurement report in full event mode
<FullEventHOConfShoMgtEvent1E>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the period during which the condition of the event 1F must
timeToTrigger1F FullEventHOConfShoMgtEvent1F 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 640 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventHOConfShoMgt>- be satisfied before sending a measurement report in full event mode
<FullEventHOConfShoMgtEvent1F>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- Indicates the period of time during which the condition of the Event1J has to be
timeToTrigger1J FullEventHOConfShoMgtEvent1J 3 RNC none customer_tuning Radio Mobility [SHO] ms Enumerate 100 32076 E-DCH Macro Diversity Support UA6.0
<FullEventHOConfShoMgt>- satisfied before sending a Measurement Report.
<FullEventHOConfShoMgtEvent1J>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- Indicates the period of time during which the condition of the Event2D has to be Service Based Mobility parameters
timeToTrigger2D FullEventHOConfHhoMgtEvent2D 3 RNC none customer_tuning Radio Mobility [HHO] ms Enumerate 1280 33546 UA6.0
<FullEventHOConfHhoMgt>- satisfied before sending a Measurement Report enhancement
<FullEventHOConfHhoMgtEvent2D>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- Indicates the period of time during which the condition of the Event2F has to be Service Based Mobility parameters
timeToTrigger2F FullEventHOConfHhoMgtEvent2F 3 RNC none customer_tuning Radio Mobility [HHO] ms Enumerate 1280 33546 UA6.0
<FullEventHOConfHhoMgt>- satisfied before sending a Measurement Report enhancement
<FullEventHOConfHhoMgtEvent2F>
Time delay in seconds before triggering a 3G to 3G Handover with IuR (SRNS
SRNS Relocation UE not
timeToTrigger3Gto3GWithIur RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Mobility Relocation “UE not
s Integer 1 60 10 18880 SRNS Relocation with Iur UA5.0
involved
involved”) by the SRNC, after relocation condition are met.
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- Period during which the condition of the Event 6A must be satisfied before
timeToTrigger6A FullEventHOConfHhoMgtEvent6A 3 RNC none system_restricted Radio Mobility [HHO] ms Enumerate 1280 33331 Alarm HHO based on UE TX Power UA7.1
<FullEventHOConfHhoMgt>- sending a measurement report in Full Event Mode
<FullEventHOConfHhoMgtEvent6A>
<RadioAccessService>-<DedicatedConf>-
timeToTrigger6A UePowerLimitMgtEvent6A 3 RNC <MeasurementConfClass>- none customer_tuning Radio Measurements Time-to-trigger value for UE measurement event 6A. ms Enumerate 120 82602 E-DCH user and cell throughput increase UA8.1
<UePowerLimitMgtEvent6A>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- Period during which the condition of the Event 6B must be satisfied before
timeToTrigger6B FullEventHOConfHhoMgtEvent6B 3 RNC none system_restricted Radio Mobility [HHO] ms Enumerate 1280 33331 Alarm HHO based on UE TX Power UA7.1
<FullEventHOConfHhoMgt>- sending a measurement report in Full Event Mode
<FullEventHOConfHhoMgtEvent6B>
<RadioAccessService>-<DedicatedConf>-
timeToTrigger6B UePowerLimitMgtEvent6B 3 RNC <MeasurementConfClass>- none customer_tuning Radio Measurements Time-to-trigger value for UE measurement event 6B. ms Enumerate 120 82602 E-DCH user and cell throughput increase UA8.1
<UePowerLimitMgtEvent6B>
<RadioAccessService>-<DedicatedConf>- Time-to-trigger value before going to inactive state. If the measured UEs data
timeToTriggerForInactiveState EdchTrafficActivity 3 RNC <HspaTrafficActivityDetectionConf>- none customer_tuning Radio HSUPA userActivity rate at MAC-es layer falls below thrThresholdForInactiveState for this duration, ms Integer 400 5000 200 1000 82602 E-DCH user and cell throughput increase UA8.1
<EdchTrafficActivity> then the user is switched to inactive state. Typically multiples of averageWindow.
Defines the hysteresis time to trigger NBAP SIR error measurement report when
<RadioAccessService>-<EdchRncConf>- radio condition worsens. This parameter corresponds to the Event E
timeToTriggerSirErrorEventE EdchRncSmartphoneConf 3 RNC none expert_tuning Radio HSUPA Congestion Control ms Integer 0 4000 80 0 120363 Smart phone EDCH resource usage. LR13.1
<EdchRncSmartphoneConf> (Measurement Hysteresis Time) of NBAP dedicated measurement. Meaningful
only if psRabBadRadioSmartEdchResourc
TS 25.415 Tinit
tInit DlRbSetConf 3 RNC <RadioAccessService>-<DlRbSetConf> none system_restricted Radio Protocols Iu-UP This Timer is used to supervise the reception of the initialisation ms Integer 0 65535 500 20649 Online modification of UTRAN parameters UA3.0
acknowledgement frame from the peer Iu UP instance.
TS 25.415 Tinit
tInit UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Protocols Iu-UP This Timer is used to supervise the reception of the initialisation ms Integer 0 65535 100 20649 Online modification of UTRAN parameters UA3.0
acknowledgement frame from the peer Iu UP instance.
<RNC>-<CsCoreNetworkAccess>-
CSReceivingRanapOverloadContr
tInTR 3 RNC <CSRanapOverloadControl>- none system_restricted Radio Load Management RANAP It is the Overload Control Increment timer as defined in 3GPP 25.413. s Integer 0 65535 10 33804 Manual Overload Control UA5.0
ol
<CSReceivingRanapOverloadControl>
<RNC>-<PsCoreNetworkAccess>-
PSReceivingRanapOverloadContr
tInTR 3 RNC <PSRanapOverloadControl>- none system_restricted Radio Load Management RANAP It is the Overload Control Increment timer as defined in 3GPP 25.413. s Integer 0 65535 10 33804 Manual Overload Control UA5.0
ol
<PSReceivingRanapOverloadControl>
Enumerated indicating if a TMA (Tower Masthead amplifier) is present and if so,
tmaAccessType AntennaAccess 0 BTS <BTSEquipment>-<AntennaAccess> critical customer_setting Radio Design N.A. Enumerate N.A. 33519 Daisy-chain operation for RRH solutions UA7.1
the type of TMA.
This supervision timer defines the maximum time period that a UE is allowed to
continuously occupy a common E-DCH resource. Once this supervision timer
tMaxCommonEdchResAllocation BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio Power Management FACH s Enumerate Infinity 108103 Enhanced Cell Fach for DL and UL LR14.2
expires, the NodeB shall explicitly release the UE by using E-AGCH (INACTIVE)
for DCCH/DTCH (i.e. UE’s
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>-
tmaxDurationSensitiveDataAcquisition 3 RNC none system_restricted Radio Location Services Maximum time for acquiring the delay sensitive GPS Assistance data from SAS ms Integer 10 20000 1000 22842 Network Assisted GPS Enhancements UA4.1
gy <AGPSUeBasedLocationTechnology>
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>-
tmaxDurationSensitiveDataTransfer 3 RNC none system_restricted Radio Location Services Maximum time for transferring the delay sensitive GPS Assistance data from SAS ms Integer 10 20000 1000 22842 Network Assisted GPS Enhancements UA4.1
gy <AGPSUeBasedLocationTechnology>
This parameter applies in case of Automatic Carrier Switch-off (ACS) involving
<RadioAccessService>-<DedicatedConf>-
three cells (one base and two overlay cells).
totalCellsLoadThresholdForFirstSwitchOff AutoSwitchOffConfExtension 3 RNC <AutoSwitchOffConfClass>- none customer_setting Radio Power Management SwitchOff N.A. Integer 0 9999 1 30 118254 Automatic Carrier Switch-off Evolution LR Future
When base cell and two overlay cells are monitored, one overlay cell can be
<AutoSwitchOffConfExtension>
switched-off only when the total Radio Link load in t
This parameter applies in case of Automatic Carrier Switch-off (ACS) involving
<RadioAccessService>-<DedicatedConf>-
three cells (one base and two overlay cells).
totalCellsLoadThresholdForSwitchOnSecondOverlay AutoSwitchOffConfExtension 3 RNC <AutoSwitchOffConfClass>- none customer_setting Radio Power Management SwitchOff N.A. Integer 0 9999 1 40 118254 Automatic Carrier Switch-off Evolution LR Future
When base cell and one overlay cell are monitored, the already switched-off
<AutoSwitchOffConfExtension>
overlay cell can be switched-on only when the total R
This parameter applies in case of Automatic Carrier Switch-off (ACS) involving
<RadioAccessService>-<DedicatedConf>-
three cells (one base and two overlay cells).
totalCellsPowerThresholdForFirstSwitchOff AutoSwitchOffConfExtension 3 RNC <AutoSwitchOffConfClass>- none customer_setting Radio Power Management SwitchOff % Integer 0 100 1 60 118254 Automatic Carrier Switch-off Evolution LR Future
When base cell and two overlay cells are monitored, one overlay cell can be
<AutoSwitchOffConfExtension>
switched-off only when the total Power load reported
This parameter applies in case of Automatic Carrier Switch-off (ACS) involving
<RadioAccessService>-<DedicatedConf>-
three cells (one base and two overlay cells).
totalCellsPowerThresholdForSwitchOnSecondOverlay AutoSwitchOffConfExtension 3 RNC <AutoSwitchOffConfClass>- none customer_setting Radio Power Management SwitchOff % Integer 0 100 1 80 118254 Automatic Carrier Switch-off Evolution LR Future
When base cell and one overlay cell are monitored, the already switched-off
<AutoSwitchOffConfExtension>
overlay cell can be switched-on only when the total P
The Maximum Rise Over Thermal Noise represents de maximum UL power
allowed relative to the Thermal Noise.
Parameter Class Evolution in UA08 & UTRAN
totalRotMax FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio HSUPA Scheduler The ROT is linked to the UL load of the cell by : TotalRot = 10log10(1/(1-Ulload)) dB Float 0 20 0,1 6 80685 UA8.1
model simplification
with the Ulload€[0..0.99] (0.75 for exemple)
It is used by the
The RNC assigns paging requests to the next free Paging Occasion (PO)
available for a UE and its DRX cycle length. In case of high paging load the Improvement of Paging Channel(PCH)
tPageVal RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Accessibility Paging ms Integer 640 40960 10 40960 79036 UA7.1.2
paging may get queued for a long time before a free PO is found. Most core scheduling
networks repeat pagings if no pag
tracedUeIdentification AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial customer_setting Radio Call Trace Value of the UE identifier (IMSI, TMSI, P-TMSI or IMEI) iof the mobile to trace, N.A. String 0 N.A. 14759 Full Call Trace (UMTS02) UA2.0
tracedUeIdentification UserEquipmentId 0 RNC critical customer_setting Radio Call Trace Value of the UE identifier (IMSI, TMSI, P-TMSI or IMEI) iof the mobile to trace, N.A. String 0 N.A. 0 none UA3.1
tracedUeIdType AccessSession 0 RNC <RNC>-<CallTrace>-<AccessSession> partial customer_setting Radio Call Trace User Equipment Identifier set inside the tracedUeIdentification N.A. Enumerate imsi 14759 Full Call Trace (UMTS02) UA2.0
User Equipment identifier set inside the tracedUeIdentification can be either IMSI,
tracedUeIdType UserEquipmentId 0 RNC critical customer_setting Radio Call Trace N.A. Enumerate imsi 0 none UA3.1
TMSI, IMEI, pTMSI
<RNC>-<CallTrace>-<AccessSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
<RNC>-<CallTrace>-<CoreSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<RecordType00Filter>-<TraceFilter>
<RNC>-<CallTrace>-<CoreSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<RecordType01Filter>-<TraceFilter>
<RNC>-<CallTrace>-<CoreSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<RecordType02Filter>-<TraceFilter>
<RNC>-<CallTrace>-<GeographicalSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
<RNC>-<CallTrace>-<NeighbouringSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
traceModeList TraceFilter 0 RNC <RNC>-<CallTrace>-<SessionMTc>-<TraceFilter> partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
traceModeList TraceFilter 0 RNC <RNC>-<CallTrace>-<SessionMTg>-<TraceFilter> partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<RNC>-<ObjectTrace>-<CellSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
<RNC>-<ObjectTrace>-<IuBcSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
<RNC>-<ObjectTrace>-<IuCsSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
<RNC>-<ObjectTrace>-<IuPsSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
<RNC>-<ObjectTrace>-<IuRSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
<RNC>-<ObjectTrace>-<RNCSession>-
traceModeList TraceFilter 0 RNC partial system_restricted Radio Call Trace mode used for the records of that filter N.A. Enumerate N.A. 14759 Full Call Trace (UMTS02) UA2.0
<TraceFilter>
Merge of 32882 Call failure reasons collection
traceType RNCSession 0 RNC <RNC>-<ObjectTrace>-<RNCSession> partial system_restricted Radio Call Trace Type of tracable data that CallFailureTrace will collect N.A. Enumerate N.A. 33807 UA6.0
in UA05 in UA06
This parameter identifies the Tracking Area Code of the cell. See TS
trackingAreaCode LteCell 3 RNC <RNC>-<LteNeighbour>-<LteCell> none customer_setting Radio Mobility LTE N.A. BitString 16 16 N.A. 100894 UMTS to LTE Handover LR14.2
36.331/24.301.
TS 25.331
<RadioAccessService>-<AlwaysOnConf>- This parameter is used in conjunction with the measTrafficQuant. It's conditional Always On: User management with two-step
trafficTMI AoOnFachParam 3 RNC none system_restricted Radio PS Call management Always-on ms Enumerate N.A. 13473 UA2.0
<AoOnFachParam> on {Average/Variance} selection of the measTrafficQuant. It corresponds to a downsizing
time interval used to determine average or variance rlcbuffer. It is part of upsize
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<AccessSession>-
trafficVolumeTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether traffic volume reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
RrcDedicatedMeasConfigForCall <RNC>-<CallTrace>-<GeographicalSession>-
trafficVolumeTypeMeasurementReportingRequired 0 RNC partial customer_tuning Radio Call Trace Indicates whether traffic volume reporting is required. N.A. Boolean FAUX 34583 UA07 Call Trace Development UA7.0
Trace <RrcDedicatedMeasConfigForCallTrace>
TS 25.331 Transmission window size
dlRlcAmConf :
<RadioAccessService>-<RlcConfClass>- >transWindowSize L2 improvements support (RLC & MAC-hs/e
transmissionWindowSize DlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Protocols N.A. Enumerate N.A. 34388 UA7.0
<DlRlcAckFlexibleMode> Transmission window size S/W for improved RLC)
Maximum number of RLC Pus sent without getting them acknowledged,
This parameter is needed if acknowledged mode is used.
TS 25.331 Transmission window size
dlRlcAmConf :
<RadioAccessService>-<RlcConfClass>- >transWindowSize
transmissionWindowSize DlRlcAckMode 3 RNC none expert_tuning Radio Protocols [RLC][Ack mode][DL] N.A. Enumerate N.A. 16717 RRC States Management UA3.0
<DlRlcAckMode> Transmission window size
Maximum number of RLC Pus sent without getting them acknowledged,
This parameter is needed if acknowledged mode is used.
TS 25.331 Transmission window size
>transWindowSize
<RadioAccessService>-<RlcConfClass>-
transmissionWindowSize UlRlcAckFlexibleMode 3 RNC none expert_tuning Radio Synchronisation Radio synchronisation Transmission window size
N.A. Enumerate N.A. 89563 Enhanced L2 for Uplink LR13.3
External Document <UlRlcAckFlexibleMode> Page 63 Alcatel-Lucent
Maximum number of RLC Pus sent without getting them acknowledged,
This parameter is needed if acknowledged mode is used.
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
type1ThresholdRscp TypeThresholds 3 RNC none customer_tuning Radio Mobility [HHO][CDMA] if UE measurement at border cell goes below a certain level, RNC decides HO dBm Integer -120 -25 -70 33853 Support of WCDMA to CDMA Handover UA6.0
if UE measurement at border cell goes above a certain level in RSCP by
type2ThresholdEcNo TypeThresholds 3 RNC none customer_tuning Radio Mobility [HHO][CDMA] dB Integer -24 0 -12 33853 Support of WCDMA to CDMA Handover UA6.0
algorithm type2
if UE measurement at border cell goes above a certain level in Ec/N0 by
type2ThresholdRscp TypeThresholds 3 RNC none customer_tuning Radio Mobility [HHO][CDMA] dBm Integer -120 -25 -70 33853 Support of WCDMA to CDMA Handover UA6.0
algorithm type2
Used to determine the algorithm for inter-frequency neighbor list creation for
dedicated measurements. Possible values are: - PRL: All neighbors from the Compound Neighbour List Developments
typeOfCompoundingNeighbourListInterFreq FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility N.A. Enumerate Prl 34274 UA6.0
primary cell are selected. The behavior is the same as if parameter (IFREQ/IRAT)
RadioAccessService::isCompounding
Used to determine the algorithm for inter-frequency neighbor list creation for
dedicated measurements. Possible values are: - PRL: All neighbors from the Compound Neighbour List Developments
typeOfCompoundingNeighbourListInterFreq NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none expert_tuning Radio Mobility N.A. Enumerate Prl 34274 UA6.0
primary cell are selected. The behavior is the same as if parameter (IFREQ/IRAT)
RadioAccessService::isCompounding
Used to determine the algorithm for 2G inter-RAT neighbor list creation for
dedicated measurements. Possible values are: - PRL: All neighbors from the Compound Neighbour List Developments
typeOfCompoundingNeighbourListInterRat FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Mobility N.A. Enumerate Prl 34274 UA6.0
primary cell are selected. The behavior is the same as if parameter (IFREQ/IRAT)
RadioAccessService::isCompoundingCel
Used to determine the algorithm for 2G inter-RAT neighbor list creation for
dedicated measurements. Possible values are: - PRL: All neighbors from the Compound Neighbour List Developments
typeOfCompoundingNeighbourListInterRat NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none expert_tuning Radio Mobility N.A. Enumerate Prl 34274 UA6.0
primary cell are selected. The behavior is the same as if parameter (IFREQ/IRAT)
RadioAccessService::isCompoundingCel
Used to determine the algorithm for intra-frequency neighbor list creation for
dedicated measurements. Possible values are: Compounding Neighbor list developments
typeOfCompoundingNeighbourListIntraFreq FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility N.A. Enumerate Type1 33693 UA6.0
- PRL: All neighbors from the primary cell are selected. The behavior is the same (Intra-Frequency)
as if parameter RadioAccessService::isCompounding
External Document Page 64 Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Used to determine the algorithm for intra-frequency neighbor list creation for
dedicated measurements. Possible values are: Compounding Neighbor list developments
typeOfCompoundingNeighbourListIntraFreq NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_setting Radio Mobility N.A. Enumerate Type1 33693 UA6.0
- PRL: All neighbors from the primary cell are selected. The behavior is the same (Intra-Frequency)
as if parameter RadioAccessService::isCompounding
Used to determine the algorithm for LTE frequency neighbor list creation for
dedicated measurements. Possible values are:
typeOfCompoundingNeighbourListLte FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_tuning Radio Mobility LTE N.A. Enumerate Prl 100894 UMTS to LTE Handover LR14.2
- PRL: All LTE neighbors from the primary cell are selected.
- Type1: Compound LTE neighbour list is build from all active set cells
Used to determine the algorithm for LTE frequency neighbor list creation for
dedicated measurements. Possible values are:
typeOfCompoundingNeighbourListLte NeighbouringRNC 3 RNC <RNC>-<NeighbouringRNC> none customer_tuning Radio Mobility LTE N.A. Enumerate Prl 100894 UMTS to LTE Handover LR14.2
- PRL: All LTE neighbors from the primary cell are selected.
- Type1: Compound LTE neighbour list is build from all active set cells
typeOfTraffic VirtualInterface 0 BTS <BTSEquipment>-<IpRan>-<VirtualInterface> critical expert_tuning Transport IP describes the type(s) of traffic associated to the considered VirtualInterface. N.A. Enumerate N.A. 79362 Flexible Operator Configurable Split IP Iub UA8.1
<RNC>-<NodeB>-<FDDCell>-
tzLeft CchDlTimingAdjustmentParams 2 RNC <MbmsResourceClass2>- partial system_restricted Radio Synchronisation Iub Synchronisation This parameter defines the left sub-zone of NodeBs receiving window target zone ms Integer 0 255 5 31868 MBMS Broadcast UA7.1
<CchDlTimingAdjustmentParams>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
tzLeft FACH 2 RNC partial system_restricted Radio Synchronisation Iub Synchronisation Left sub-zone of NodeB's receiving window target zone. ms Integer 0 255 5 16717 RRC States Management UA3.0
<FACH>
tzLeft PCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Synchronisation Iub Synchronisation Left sub-zone of NodeB's receiving window target zone. ms Integer 0 255 5 16717 RRC States Management UA3.0
<RNC>-<NodeB>-<FDDCell>-
This parameter defines the right sub-zone of NodeBs receiving window target
tzRight CchDlTimingAdjustmentParams 2 RNC <MbmsResourceClass2>- partial system_restricted Radio Synchronisation Iub Synchronisation ms Integer 0 255 5 31868 MBMS Broadcast UA7.1
zone
<CchDlTimingAdjustmentParams>
<RNC>-<NodeB>-<FDDCell>-<SCCPCH>-
tzRight FACH 2 RNC partial system_restricted Radio Synchronisation Iub Synchronisation Right sub-zone of NodeB's receiving window target zone. ms Integer 0 255 5 16717 RRC States Management UA3.0
<FACH>
tzRight PCH 2 RNC <RNC>-<NodeB>-<FDDCell>-<SCCPCH>-<PCH> partial system_restricted Radio Synchronisation Iub Synchronisation Right sub-zone of NodeB's receiving window target zone. ms Integer 0 255 5 16717 RRC States Management UA3.0
udpMuxPort UdpMuxInfo 0 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused value of the port to be used for the considered multiplexed flow. N.A. Integer 65502 65517 1 N.A. 89716 UDP multiplexing on Iub (iBTS) Cancelled
udpMuxPort UdpMuxInfo 0 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused value of the port to be used for the considered multiplexed flow. N.A. Integer 65502 65517 1 N.A. 89716 UDP multiplexing on Iub (iBTS) Cancelled
<RadioAccessService>-<DedicatedConf>- Threshold for a 6A UE Internal Measurement configured for the UE when a PS
uE6AoffsetFromMax UlRncRabModMeas 3 RNC <PowerConfClass>-<UlUsPowerConf>- none expert_tuning Radio Mobility [HHO] radio bearer is present. Represented in terms of dB from the UE's maximum dB Integer 0 83 3 34226 RNC initiated RAB modification UA6.0
<UlRncRabModMeas> power.
<RadioAccessService>-<UlRbSetConf>-
ue6ATimeToTrigger UlRbRaTrafficMonitoring 3 RNC none expert_tuning Radio Mobility [HHO] Time to Trigger for UE 6A Internal Measurement for the RAB modification trigger. N.A. Enumerate 2560 34227 State transitioning developments UA6.0
<UlRbRaTrafficMonitoring>
Filter Coefficient for UE 6A Internal Measurement. The formula for the filter is
<RadioAccessService>-<DedicatedConf>-
given in 25.331 8.6.7.2 with sample interval of one slot. This yields the following
uE6AtxPowerFilter UlRncRabModMeas 3 RNC <PowerConfClass>-<UlUsPowerConf>- none expert_tuning Radio Mobility [HHO] N.A. Enumerate 17 34226 RNC initiated RAB modification UA6.0
approximation to filter time constant given the filter coefficients: Coeff /Time
<UlRncRabModMeas>
Constant
ueBasedAgpsActivationAllowed LocationServices 3 RNC <RNC>-<LocationServices> none customer_init Radio Location Services It indicates if UE based A-GPS feature is activated. N.A. Boolean FAUX 34151 Immediate Handover of Emergency calls UA3.2
<RNC>-<LocationServices>- Defines if UE-based AGPS is activated for commercial location services. True
ueBasedAgpsParamsEnabled CommercialLocationServices 3 RNC none customer_init Radio Location Services N.A. Boolean FAUX 25027 Advanced Location Services UA6.0
<CommercialLocationServices> means activated
<RNC>-<LocationServices>- It indicates whether UE based A-GPS is allowed for support of Emergency
ueBasedAgpsParamsEnabled EmergencyLocationService 3 RNC none customer_init Radio Location Services N.A. Boolean FAUX 25027 Advanced Location Services UA6.0
<EmergencyLocationService> Services
CallTracePeriodicLocationService <RNC>-<LocationServices>- Max allowed delay for location fix using network assisted AGPS UE positioning
ueBasedAgpsParamsMaxResponseTime 3 RNC none customer_tuning Radio Call Trace s Integer 1 60 1 24 34582 UE positionning information to CTg and CTb UA8.1
s <CallTracePeriodicLocationServices> method.
<RNC>-<LocationServices>- Max allowed delay for location fix using network assisted AGPS UE positioning Enhancement of UTRAN positionning for 'Low
ueBasedAgpsParamsMaxResponseTime CommercialLocationServices 3 RNC none system_restricted Radio Location Services s Integer 1 60 1 24 34406 UA7.1
<CommercialLocationServices> method for a delay tolerant request. Delay' location requests
<RNC>-<LocationServices>- Max allowed delay for location fix using network assisted AGPS UE positioning Enhancement of UTRAN positionning for 'Low
ueBasedAgpsParamsMaxResponseTime EmergencyLocationService 3 RNC none system_restricted Radio Location Services s Integer 1 60 1 24 34406 UA7.1
<EmergencyLocationService> method for a delay tolerant request. Delay' location requests
<RNC>-<LocationServices>- Max allowed delay for location fix using network assisted AGPS UE positioning Enhancement of UTRAN positionning for 'Low
ueBasedAgpsParamsMaxResponseTimeLD CommercialLocationServices 3 RNC none system_restricted Radio Location Services s Integer 1 60 1 12 34406 UA7.1
<CommercialLocationServices> method for a low delay request. Delay' location requests
<RNC>-<LocationServices>- Max allowed delay for location fix using network assisted AGPS UE positioning Enhancement of UTRAN positionning for 'Low
ueBasedAgpsParamsMaxResponseTimeLD EmergencyLocationService 3 RNC none system_restricted Radio Location Services s Integer 1 60 1 12 34406 UA7.1
<EmergencyLocationService> method for a low delay request. Delay' location requests
<RNC>-<LocationServices>-
UeBasedGpsDataTransferSegme Maximum number of GPS Satellites (SV) for Almanac and Satellite Health
UeBasedMaxNbGpsSatPerRrcMsgForAlmanac 3 RNC <AGPSUeBasedLocationTechnology>- none expert_tuning Radio Location Services N.A. Integer 1 16 1 16 27615 GPS assistance data developments UA7.1
ntation information sent to the UE in a single RRC message.
<UeBasedGpsDataTransferSegmentation>
<RNC>-<LocationServices>-
UeBasedGpsDataTransferSegme Maximum number of GPS satellitesfor Navigational Model information sent to the
UeBasedMaxNbGpsSatPerRrcMsgForNavModel 3 RNC <AGPSUeBasedLocationTechnology>- none expert_tuning Radio Location Services N.A. Integer 1 12 18 27615 GPS assistance data developments UA7.1
ntation UE in a single RRC message.
<UeBasedGpsDataTransferSegmentation>
<RNC>-<LocationServices>-
AGPSUeBasedLocationTechnolo <AGPSUeBasedLocationTechnology>-
ueBasedTemporaryV4Parm00 3 RNC none expert_tuning Radio Location Services N.A. Integer 0 2147483647 N.A. 22842 Network Assisted GPS Enhancements UA4.1
gyExtendedParams <AGPSUeBasedLocationTechnologyExtendedPara
ms>
<RNC>-<LocationServices>-
AGPSUeBasedLocationTechnolo <AGPSUeBasedLocationTechnology>-
ueBasedTemporaryV4Parm01 3 RNC none expert_tuning Radio Location Services N.A. Integer 0 2147483647 N.A. 22842 Network Assisted GPS Enhancements UA4.1
gyExtendedParams <AGPSUeBasedLocationTechnologyExtendedPara
ms>
<RNC>-<LocationServices>- To activate/deactivate the dynamic delta CFN calculation (PM30171-1)
AGPSUeBasedLocationTechnolo <AGPSUeBasedLocationTechnology>- ueBasedTemoraryV4Param02[0] -> isDynamicDeltaCfnCalculation
ueBasedTemporaryV4Parm02 3 RNC none expert_tuning Radio Location Services N.A. Integer 0 2147483647 N.A. 22842 Network Assisted GPS Enhancements UA4.1
gyExtendedParams <AGPSUeBasedLocationTechnologyExtendedPara ueBasedTemoraryV4Param02[1 - 9] -> psCallsDeltaCfnDelay represents the
ms> delay*2 + 1 in ms to add to the Always-on Downsize an
Defines UE category details to the NodeB scheduler, indicating the level of
ueCapabilityInfo OcnsHsdpa 2 RNC <RNC>-<NodeB>-<FDDCell>-<OcnsHsdpa> partial expert_tuning Radio Power Management OCNS N.A. Integer 1 12 6 34195 Support OCNS with HSDPA UA6.0
HSDPA support
SRNS Relocation UE not
ueCapaRelocation RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Mobility Indicates whether UE capability is included in the relocation message. N.A. Boolean FAUX 0 none UA4.3K
involved
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory1 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory1 3 BTS none system_restricted Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory10 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory10 3 BTS none system_restricted Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory11 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory11 3 BTS none expert_tuning Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory12 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean VRAI 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory12 3 BTS none expert_tuning Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory2 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory2 3 BTS none expert_tuning Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory3 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory3 3 BTS none expert_tuning Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory4 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory4 3 BTS none expert_tuning Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory5 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory5 3 BTS none expert_tuning Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory6 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory6 3 BTS none expert_tuning Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory7 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean VRAI 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory7 3 BTS none system_restricted Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory8 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean VRAI 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory8 3 BTS none system_restricted Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
This parameter allows to enhance the CQI mapping tables (as proposed in spec
HsdpaMaxUeCategoryCapabilityA <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory9 3 BTS none system_restricted Radio HSDPA Configuration 3GPP TS 25.214) in order to provide the maximum throughput handled by the UE N.A. Boolean FAUX 29813 UE Cat 9 & 10 Support UA5.0
ctivation <HsdpaMaxUeCategoryCapabilityActivation>
category
This parameter allows to enhance the CQI mapping tables by modifying the
HsdpaUeCategoryTransportBlock <BTSEquipment>-<BTSCell>-<HsdpaConf>-
ueCategory9 3 BTS none system_restricted Radio HSDPA Configuration transport block sizes according to the MAC-d PDU size in order to reduce the N.A. Boolean VRAI 29819 HSDPA Performance Enhancement UA5.0
Optimisation <HsdpaUeCategoryTransportBlockOptimisation>
number of padding bits. This should improve the performances
subfra
[Continuous Packet
ueDpcchBurst1 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none system_restricted Radio PS Call management Length of UL DPCCH transmission burst (cycle 1) me Enumerate 5 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
ueDpcchBurst1Tti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] Length of UL DPCCH transmission burst (cycle 1) 10 ms base me Enumerate 5 83871 Continuous Packet Connectivity (CPC) LR Future
(10ms)
subfra
ueDpcchBurst1Tti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] Length of UL DPCCH transmission burst (cycle 1) 2 ms base me Enumerate 5 83871 Continuous Packet Connectivity (CPC) LR Future
(2ms)
subfra
[Continuous Packet
ueDpcchBurst2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none system_restricted Radio PS Call management Length of UL DPCCH transmission burst (cycle 2) me Enumerate 5 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
ueDpcchBurst2Tti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] Length of UL DPCCH transmission burst (cycle 2) 10 ms base me Enumerate 5 83871 Continuous Packet Connectivity (CPC) LR Future
(10ms)
subfra
External Document Page 65 Alcatel-Lucent
ueDpcchBurst2Tti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] Length of UL DPCCH transmission burst (cycle 2) 2 ms base me Enumerate 5 83871 Continuous Packet Connectivity (CPC) LR Future
(2ms)
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
subfra
[Continuous Packet UE DRX Cycle Length when UE is in DRX state (determines F-DPCH, HS-SCCH,
ueDrxCycle CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] E-AGCH, E-RGCH and E-HICH reception patterns)
(2ms)
subfra
UE DRX Cycle Length when UE is in DRX state (determines F-DPCH, HS-SCCH,
ueDrxCycleTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
E-AGCH, E-RGCH and E-HICH reception patterns) for 10 ms
(10ms)
subfra
UE DRX Cycle Length when UE is in DRX state (determines F-DPCH, HS-SCCH,
ueDrxCycleTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
E-AGCH, E-RGCH and E-HICH reception patterns) for 2 ms
(2ms)
[Continuous Packet When TRUE, UE must decode E-AGCH from serving cell and E-RGCH from all
ueDrxGrantMonitoring CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none system_restricted Radio PS Call management N.A. Boolean VRAI 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity] cells in E-DCH active set, when they overlap with the HS-SCCH reception pattern
subfra
[Continuous Packet
ueDtxCycle1EdchTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management CPC DTX Cycle 1 Length (when E-DCH TTI 10ms) me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
[Continuous Packet
ueDtxCycle1EdchTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management CPC DTX Cycle 1 Length (when E-DCH TTI 2ms) me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
[Continuous Packet
ueDtxCycle2EdchTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management CPC DTX Cycle 2 Length (when E-DCH TTI 10ms) me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
[Continuous Packet
ueDtxCycle2EdchTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management CPC DTX Cycle 2 Length (when E-DCH TTI 2ms) me Enumerate 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
[Continuous Packet
ueDtxDrxOffsetTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management Offset of the DTX and DRX cycles at a given TTI (for E-DCH 10ms) me Integer 0 155 50 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
[Continuous Packet
ueDtxDrxOffsetTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio PS Call management Offset of the DTX and DRX cycles at a given TTI (for E-DCH 2ms) me Integer 0 159 10 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
[Continuous Packet
ueDtxLongPreambleLength CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none system_restricted Radio PS Call management Length of the preamble to be used when returing from DTX Cycle 2 me Enumerate 4 83871 Continuous Packet Connectivity (CPC) LR Future
Connectivity]
(2ms)
subfra
Length of the preamble to be used when returing from DTX Cycle 2 TTI 10 ms
ueDtxLongPreambleLengthTti10 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] me Enumerate 15 83871 Continuous Packet Connectivity (CPC) LR Future
base
(2ms)
subfra
Length of the preamble to be used when returing from DTX Cycle 2 TTI 2 ms
ueDtxLongPreambleLengthTti2 CpcDtxDrxConfClass 3 RNC <RadioAccessService>-<CpcDtxDrxConfClass> none expert_tuning Radio Mobility [SHO] me Enumerate 15 83871 Continuous Packet Connectivity (CPC) LR Future
base
(2ms)
Timer used to perform an audit between mac-C and Mac-D entities in the
ueFachAuditTimer RadioAccessService 0 RNC <RadioAccessService> critical system_restricted Radio Load Management UE call audit Inode.
s Integer 0 65535 20 16717 RRC States Management UA3.0
It is a timer for the cell context to audit the UE context when there's no traffic.
<RadioAccessService>- Define HFI ratio threshold for determining when a call is deemed to be in a Multi-Service RAB call drop reduction for
ulHfiRatioThreshold MultiServiceRabManagement 3 RNC none expert_tuning Radio Retainability Multi RAB % Integer 0 100 1 30 119418 UA08.1
<MultiServiceRabManagement> vulnerable state in regards to radio conditions. This is a percentage value. Smartphone
<RadioAccessService>- Multi-Service RAB call drop reduction for
ulHfiSamplingPeriod MultiServiceRabManagement 3 RNC none expert_tuning Radio Retainability Multi RAB Define HFI monitoring period to be used in determining the HFI Ratio. s Float 0.0 60.0 0.1 0.2 119418 UA08.1
<MultiServiceRabManagement> Smartphone
ulIrmTableConfClassId UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none customer_setting Radio Call Admission Control iRM Reference associated to the identity of the ulIrmTableConfClass selected N.A. ServiceLink N.A. 24837 Uplink iRM UA5.0
Indicates the maximum possible UL delay for CS voice frames. Configuration to
ulMaxCsDelay CsHspaDejitter 3 RNC <RadioAccessService>-<CsHspaDejitter> none system_restricted Radio Speech Call Management Voice over HSPA ms Integer 0 200 2 50 36247 Cs Voice over HSPA LR15.1
be sent to the UL De-Jitter in the U-Plane RNC.
Hysteresis time for determining when to exit the vulnerable state once radio
Multi-Service RAB call drop reduction
ulNonVulnerabilityTimeToTrigger UlUserService 3 RNC <RadioAccessService>-<UlUserService> none expert_tuning Radio Retainability Multi RAB condition are no longer considered to be poor. This timer is used for both BLER s Float 0.0 60.0 0.1 5.0 123648 LR Future
enhancement
and HARQ retransmission measures.
ulOutOfOrderSduDeliveryMethod UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Unused not used Method used for delivery of out-of-order RLC SDUs. N.A. Enumerate InSequence 28042 Throughput KPI improvement LR Future
Configuration of the list of PDU sizes to be used for a VoIP RAB.
ulPduSizeListFirstRb UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Speech Call Management VoIP bits Integer 0 5000 1 <Null> 36247 Cs Voice over HSPA LR15.1
This list shall not be present for non VoIP RbSet.
defines the upper limit of each screening for the user perceived throughput of UL (96, 128, 160, 192, 224, 256, 288, 320,
ulR99Thd PmUserTpConf 3 RNC <RadioAccessService>-<PmUserTpConf> none customer_tuning Radio Counters Kbits/s Integer 1 384 1 34696 User Perceived Throughput Counters UA7.0
R99 PS interactive/background traffic 352)
UpLink Rate matching attribute.
<RadioAccessService>-<UlRbSetConf>-
The UlRateMatchingAttribute modification of the ULRbSet(s) can impact
ulRateMatchingAttributeEntry UlRateMatchingAttributeList 3 RNC <DynamicParameterPerDch>- none system_restricted Radio Channels & Bearers Configuration N.A. Integer 1 256 N.A. 18717 AMR Rate Adaptation UA5.0
SignalledGainFactors.betaC and betaD parameters and cannot be changed
<UlRateMatchingAttributeList>
independently of these last ones: please check any impact on betaC/betaD and
mod
ulRbPduSizeList UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none system_restricted Radio Channels & Bearers Configuration DL RLC PDU size. For each RB of the RBSet. bits Integer 0 5000 N.A. 29813 UE Cat 9 & 10 Support UA5.0
Defines the threshold to trigger a UL RB rate downsize.If thisparameter is not
RB Rate Adaptation - provided, it would mean that no downsizing is allowed from this RbSetConf.
RB adaptation based on traffic: DL and UL
ulRbRateAdaptationDownsizeThreshold UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none expert_tuning Radio PS Call management Kbits/s Integer 0 2048 N.A. 27330 UA4.2
throughput
with start @64kbit/s
It is only applicable for Interactive / Background PS RBs (#8 & 15).
This parameter (one parameter per RB) defines the thresholds (expressed as a
RB Rate Adaptation - rate value) over which, a DL RB rate upsize should be triggered.
RB adaptation based on traffic: DL and UL
ulRbRateAdaptationUpsizeThreshold UlRbSetConf 3 RNC <RadioAccessService>-<UlRbSetConf> none expert_tuning Radio PS Call management Kbits/s Integer 0 2048 N.A. 27330 UA4.2
throughput If the parameter (for the considered RB) is not provided, the upsizing is not with start @64kbit/s
allowed from this RB configuratio
<RadioAccessService>-<Imcta>- Unified RRM Step 2 : Cell Load information
ulRedLoadValue InterSystemHoConfClass 3 RNC none expert_tuning Radio Mobility [HHO][3G2G] Value to be put into load value element for a Red cell in Ul % Integer 0 100 0 33326 UA6.0
<InterSystemHoConfClass> exchange between 2G and 3G
UL Scrambling Code Range to use for the RNC. Value corresponds to the 4 MSB
from all UL Scrambling Codes out of the range of [8192..16777215] for normal
ulScramblingCodeRangeSelector RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Design Network design N.A. Integer 0 15 0 27901 UA04.2 Parameters evolution UA4.2
(UMTS internal) usage. Value also corresponds to the 4 MSB from all Reduced
UL Scrambling Codes out of
<RadioAccessService>-<DedicatedConf>- This parameter is used to determine the range of values taken into consideration Multi-Service RAB call drop reduction for
ulSirAlphaValue UlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB N.A. Float 0 1 0,1 0,5 119418 UA8.1
<PowerConfClass>-<UlUsPowerConf> when choosing the SIR value which cause vulnerability to be triggered or removed Smartphone
Indicates if the enhanced Uplink SIR estimation function is activated or
ulSirEstimationForDPCCHProtection BTSEquipment 3 BTS <BTSEquipment> critical system_restricted Radio HSUPA Throughput deactivated N.A. Boolean FAUX 94698 Enhanced SIR estimation for E-DCH UA7.1.2
<RadioAccessService>-<DedicatedConf>- This value is used to detect when a CS connection is no longer vulnerable to bad Multi-Service RAB call drop reduction for
ulSirNonVulnerableThresholdDelta UlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB dB Float 0 10 0,1 2 119418 UA8.1
<PowerConfClass>-<UlUsPowerConf> radio conditions. Smartphone
This is the time period allowed for the removal of a vulnerable situation to exist
<RadioAccessService>-<DedicatedConf>- Multi-Service RAB call drop reduction for
ulSirNonVulnerableTimeToTrigger UlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB before actions are taken to allow normal actions on a PS call. This timer helps s Float 0 60 0,1 5 119418 UA8.1
<PowerConfClass>-<UlUsPowerConf> Smartphone
prevent ping-pong situations.
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>-
ulSirStep 3 RNC none expert_tuning Radio HSUPA Power Control Step used to increase/decrease the partial Uplink SIR target on E-DCH dB Float 0 0,3 0,005 0,1 34249 E-DCH Adaptative HARQ Control UA6.0
ms <DynamicParameterForEdchTti10ms>
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>-
ulSirStep 3 RNC none expert_tuning Radio HSUPA Power Control Step used to increase/decrease the partial Uplink SIR target on E-DCH dB Float 0 0,3 0,005 0,1 34249 E-DCH Adaptative HARQ Control UA6.0
s <DynamicParameterForEdchTti2ms>
<RadioAccessService>-<DedicatedConf>-
ulSirTarget CommonEdchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH it specifies Uplink SIR Target for common E-DCH transmission (Ul Dpch). NBAP. dB Float -8.2 17.3 0.1 4.5 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchInfo>
This value is used to detect vulnerability status of a CS connection. If this
<RadioAccessService>-<DedicatedConf>- Multi-Service RAB call drop reduction for
ulSirVulnerableThresholdDelta UlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB threshold is exceeded, steps are taken by the RNC to evade multi PS/CS RAB dB Float 0 10 0,1 1,5 119418 UA8.1
<PowerConfClass>-<UlUsPowerConf> Smartphone
combinations.
<RadioAccessService>-<DedicatedConf>- This is the time period allowed for a vulnerable situation to exist before actions Multi-Service RAB call drop reduction for
ulSirVulnerableTimeToTrigger UlUsPowerConf 3 RNC none customer_setting Radio Retainability Multi RAB s Float 0 60 0,1 5 119418 UA8.1
<PowerConfClass>-<UlUsPowerConf> are taken to safeguard a CS call. This timer helps prevent ping-pong situations. Smartphone
<RadioAccessService>-<RlcPerformanceConf>-
ulSmallSduSizeLimit OutOfOrderSduDeliveryConf 3 RNC none system_restricted Radio Unused not used Small RLC SDU size limit for uplink direction n number of consecutive RLC PDUs N.A. Integer 0 10 3 28042 Throughput KPI improvement LR Future
<OutOfOrderSduDeliveryConf>
<RadioAccessService>-<DedicatedConf>- This parameter specifies the TPC step size. The IE is mandatory present if the IE
ulTpcStepSize CommonEdchInfo 3 RNC <EdchCellClass>-<CommonEdchSysInfo>- none expert_tuning Radio Power Management FACH Power Control Algorithm (powerCtrlAlgo) is set to algorithm 1, otherwise the IE is dB Enumerate 1 108103 Enhanced Cell Fach for DL and UL LR14.2
<CommonEdchInfo> not needed. SIB5
TS 25.331 TPC step size
<RadioAccessService>-<DedicatedConf>- Uplink TPC step size, is mandatory if "Power Control Algorithm" is set to
ulTpcStepSize UlInnerLoopConf 3 RNC none system_restricted Radio Power Management UL Inner Loop dB Enumerate 1 29810 Fractional DPCH - SRB over HSPA UA8.1
<PowerCtrlConfClass>-<UlInnerLoopConf> "algorithm 1", otherwise is not needed
OPTIONAL
This parameter indicates the maximum UL guaranteed bit rate to which a RNC
ulTxcpMaxBitRate RadioAccessService 3 RNC <RadioAccessService> none expert_tuning Radio Channels & Bearers RAB negotiation Kbits/s Integer 8 384 64 34226 RNC initiated RAB modification UA6.0
can accept to downgrade a streaming PS RAB in case of RAB modification
<RadioAccessService>-<UlUserService>- An integer indicating the rate (in number of TTI) at which the SirTarget is to be Power Control and Rate Matching
ulUpdatePeriod UlOuterLoopPowerCtrl 3 RNC none expert_tuning Radio Power Management Power Control N.A. Integer 0 255 50 28040 UA4.2
<UlOuterLoopPowerCtrl> sent to the NodeB. enhancements
<RadioAccessService>-<UlRbSetConf>- Power Control and Rate Matching
ulUpSirStep DynamicParameterPerDch 3 RNC none expert_tuning Radio Power Management Power Control It represents the increase of UL SIR for each bad CRC. dB Float 0,005 0,3 0,005 N.A. 28040 UA4.2
<DynamicParameterPerDch> enhancements
Identifier of the related UlUserService
UL Access Startum Configuration Id
<RadioAccessService>-<ServiceInit>- other name: ulAsConfId
ulUserServiceId UserServices 3 RNC none customer_tuning Radio Accessibility Call Establishment N.A. ServiceLink N.A. 0 none UA1.0
<UserServices>
Notice the dlUserServiceId and UlUserServiceId must be coherent for the same
Establishement Cause. So it is recommended to reduce as much as possible th
Hysteresis time for determining when to enter the vulnerable state when the radio
conditions are considered to be poor. This timer is used for both BLER and Multi-Service RAB call drop reduction
ulVulnerabilityTimeToTrigger UlUserService 3 RNC <RadioAccessService>-<UlUserService> none expert_tuning Radio Retainability Multi RAB s Float 0.0 60.0 0.1 5.0 123648 LR Future
HARQ retransmission measures. (the value 0 indicates BLER and HARQ enhancement
retransmission are not used)
<RadioAccessService>-<Imcta>- Unified RRM Step 2 : Cell Load information
ulYellowLoadValue InterSystemHoConfClass 3 RNC none expert_tuning Radio Mobility [HHO][3G2G] Value to be put into load value element for a Yellow cell in Ul % Integer 0 100 0 33326 UA6.0
<InterSystemHoConfClass> exchange between 2G and 3G
<RNC>-<NodeB>-<FDDCell>-
umtsNeighRelationId UMTSFddNeighbouringCell 3 RNC none customer_tuning Radio Mobility Configuration N.A. ServiceLink N.A. 23076 RNC 2500 UA6.0
<UMTSFddNeighbouringCell>
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>- The SIR Variation (0.1 dB) which triggers an event-triggered update of the UL
updateThreshold 3 RNC none expert_tuning Radio HSUPA Power Control N.A. Integer 0 255 255 34249 E-DCH Adaptative HARQ Control UA6.0
ms <DynamicParameterForEdchTti10ms> SIR target
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>- The SIR Variation (0.1 dB) which triggers an event-triggered update of the UL
updateThreshold 3 RNC none expert_tuning Radio HSUPA Power Control N.A. Integer 0 255 255 34249 E-DCH Adaptative HARQ Control UA6.0
s <DynamicParameterForEdchTti2ms> SIR target
<RadioAccessService>-<UlRbSetConf>- The SIR variation (0.1dB) which trigs an event-triggered update of the UL SIR Power Control and Rate Matching
updateThreshold DynamicParameterPerDch 3 RNC none expert_tuning Radio Power Management Power Control N.A. Integer 0 255 N.A. 28040 UA4.2
<DynamicParameterPerDch> target. enhancements
Enables uplink traffic threshold sub feature of the Smart phone EDCH resource
uplinkThresholdSmartEdchResourceUsageActivation EdchRncConf 3 RNC <RadioAccessService>-<EdchRncConf> none customer_setting Radio HSUPA Congestion Control N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
usage feature. Meaningful only if smartEdchResourceUsageActivation is True
List of URA identies defined for the cell.
uraIdentityList FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Design N.A. Integer 0 65535 N.A. 26673 URA_PCH UA5.0
This parameter is not needed if URA_PCH state is disabled
<RadioAccessService>-<AlwaysOnConf>-
uraPchToIdleTimer AlwaysOnTimer 3 RNC none customer_tuning Radio PS Call management Always-on min Integer 1 7200 1 29840 Commercial Hsupa introduction UA5.0
<AlwaysOnTimer>
This parameter enables or disables the dependance of the HS-DPCCH power
useAdaptiveHsDpcchPowerOffset FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Power Control offset for CQI, HARQ ACK and HARQ NACK on the number of radio legs in the N.A. Boolean FAUX 82602 E-DCH user and cell throughput increase UA8.1
DCH active set.
<RadioAccessService>-<DedicatedConf>- Indicates if the Cell Individual Offset is to configure for the Event1D.The new
<MeasurementConfClass>- value of the parameter has to be taken into account in the life of a call, at the next
useCIOfor1D FullEventRepCritShoMgtEvent1D 3 RNC none customer_tuning Radio Mobility [SHO] N.A. Boolean FAUX 27219 Intra-frequency Event-triggered Measurements UA4.2
<FullEventRepCritShoMgt>- RRC Measurement Control to configure or reconfigure the Event (e.g.change of
<FullEventRepCritShoMgtEvent1D> Primary RL
RNC Connection to multiple Core Network
useCongestionStateWhenRoutingOnImsiImei CsFlexService 3 RNC <RNC>-<CsFlexService> none system_restricted Transport Iu Flex N.A. Boolean FAUX 29417 UA5.0
nodes (Iu-Flex)
RNC Connection to multiple Core Network
useCongestionStateWhenRoutingOnImsiImei PsFlexService 3 RNC <RNC>-<PsFlexService> none system_restricted Transport Iu Flex N.A. Boolean FAUX 29417 UA5.0
nodes (Iu-Flex)
This parameter enables or disables the enhanced algorithm for detection of active
useEnhancedUserActivityDetection FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA userActivity N.A. Boolean FAUX 82602 E-DCH user and cell throughput increase UA8.1
E-DCH users which works on U-Plane data rate measurements.
This parameter enables or disables the usage of a higher number of HARQ
useHigherHarqRetransForInactiveUsers FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none system_restricted Radio HSUPA retransmissions for inactive users. N.A. Boolean false 122612 E-DCH performance enhancement LR14.2
This only takes effect if useEnhancedUserActivityDetection is ON
This parameter enables or disables the enhanced call admission control scheme
<RadioAccessService>-<DedicatedConf>-
useImprovedBtsCacFor2msTtiUsers NodeBConfClass 3 RNC none customer_setting Radio Call Admission Control HSUPA for 2ms TTI users at the RNC. If disabled the legacy RNC CAC mechanism for N.A. Boolean FAUX 82602 E-DCH user and cell throughput increase UA8.1
<NodeBConfClass>
2ms TTI users is used.
This parameter enables or disables the enhanced call admission control scheme
useImprovedCacFor2msTtiUsers BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio Call Admission Control HSUPA N.A. Boolean FAUX 82602 E-DCH user and cell throughput increase UA8.1
for 2ms TTI users based on the channel element resource status for iBTS.
This parameter enables/disables the usage of a minimum grant also for non-
useMinimumGrantForNonServingUsers BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio PS Call management CAC N.A. Boolean false 126055 UL radio overload handling enhancements LR13.1
serving E-DCH users.
Indicates if the RNC will use OneBTS specific algorithm to determine the total and
non-EDCH UL load when RSEPS reporting is activated. The flag should be set to
useOneBTSSpecificUlLoadEstRsepsAllowed NodeB 3 RNC <RNC>-<NodeB> none customer_setting Radio HSUPA Congestion Control N.A. Boolean false 120363 Smart phone EDCH resource usage. LR13.1
false for iBTS deployment.
Meaningful only if smartEdchResourceUsageActivation is True and isN
This parameter enables or disables the increase of the number of target HARQ
useOptimizedEdchHarqRetransAtCellEdge FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSUPA Power Control N.A. Boolean FAUX 82602 E-DCH user and cell throughput increase UA8.1
transmissions when the E-DCH UE is in power limitation.
This parameter enables or disables the increase of the number of target HARQ
useOptimizedEdchHarqRetransAtCellEdge RemoteFDDCell 3 RNC <RNC>-<UmtsNeighbouring>-<RemoteFDDCell> none customer_init Radio HSUPA Throughput N.A. Boolean false 82602 E-DCH user and cell throughput increase UA08.1
transmissions when the E-DCH UE is in power limitation for neighboring cells.
This parameter enables or disables the optimized Iub congestion control scheme
useOptimizedEdchIubCongestionControl BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSUPA Congestion Control N.A. Boolean FAUX 82602 E-DCH user and cell throughput increase UA8.1
for E-DCH on iBTS.
This parameter enables/disables the usage of an optimized initial grant in case of
useOptimizedInitialGrant BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio PS Call management CAC N.A. Boolean false 126055 UL radio overload handling enhancements LR13.1
uplink cell overload.
userLabel BasicCallType N.A. RNC <RadioAccessService>-<BasicCallType> none customer_setting Radio Call Admission Control CAC user friendly label N.A. Enumerate N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<RadioAccessService>-<DedicatedConf>-
User friendly name, for operator use. It specifies userLabel (an OAM parameter)
userLabel CommonEdchMacdFlow N.A. RNC <EdchCellClass>-<CommonEdchSysInfo>- none customer_setting Radio Power Management FACH N.A. Enumerate N.A. 108103 Enhanced Cell Fach for DL and UL LR14.2
to identify each instance of CommonEdchMacdFlow
<CommonEdchMacdFlow>
it specifies userLabel (an OAM parameter) to identify each instance of
<RadioAccessService>-<DedicatedConf>-
userLabel CommonEdchSysInfo N.A. RNC none customer_setting Radio Power Management FACH CommonEdchSysInfo: - CommonEdchSysInfo/TTI10ms N.A. Enumerate TTI10ms 108103 Enhanced Cell Fach for DL and UL LR14.2
<EdchCellClass>-<CommonEdchSysInfo>
- CommonEdchSysInfo/TTI2ms
<RadioAccessService>-<DedicatedConf>-
userLabel CommonPriorityQueue N.A. RNC <HsdpaCellClass>-<HsdpaCommonSysInfo>- none customer_setting Radio Power Management FACH user friendly name, for operator use N.A. Enumerate N.A. Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<CommonPriorityQueue> 168710
userLabel CorrespondingRnc N.A. RNC <RNC>-<LteNeighbour>-<CorrespondingRnc> none customer_setting Radio Mobility LTE CorrespondingRnc identifier for OAM N.A. String 1 32 N.A. 100894 UMTS to LTE Handover LR14.2
<RNC>-<NodeB>-<FDDCell>- User friendly name, for operator use. It specifies userLabel (an OAM parameter)
userLabel EdchCommonMacFlow N.A. RNC none customer_setting Radio Power Management FACH N.A. Enumerate N.A. 108103 Enhanced Cell Fach for DL and UL LR14.2
<EdchCommonMacFlow> to identify each instance of EdchCommonMacFlow
<RNC>-<NodeB>-<FDDCell>-
userLabel HsDschCommonMacFlow N.A. RNC none customer_setting Radio Power Management FACH user friendly name, for operator use N.A. Enumerate N.A. Enhanced CELL_FACH for DL (3GPP Rel-7) LR13.3
<HsDschCommonMacFlow> 168710
userLabel LteCell N.A. RNC <RNC>-<LteNeighbour>-<LteCell> none customer_setting Radio Mobility LTE user friendly LteCell name N.A. String 0 64 N.A. 100894 UMTS to LTE Handover LR14.2
<RNC>-<NodeB>-<FDDCell>-
userLabel LteNeighbouringCell N.A. RNC none customer_setting Radio Mobility LTE user friendly LteCell name N.A. String 0 64 N.A. 100894 UMTS to LTE Handover LR14.2
<LteNeighbouringCell>
userLabel LtePlmn N.A. RNC <RNC>-<LteNeighbour>-<LtePlmn> none customer_setting Radio Mobility LTE Lte Plmn primary identifier for OAM N.A. String 0 30 N.A. 100894 UMTS to LTE Handover LR14.2
FddIntelligentMultiCarrierTrafficAll <RNC>-<NodeB>-<FDDCell>- If set to True the iMCTA function will be only applied for service reason after a intelligent Multi-Carrier Traffic Allocation
userServiceSigToTrafficOnlyEnable 3 RNC none customer_setting Radio Mobility [HHO][iMCTA] N.A. Boolean FAUX 29415 UA5.0
External Document ocation <FddIntelligentMultiCarrierTrafficAllocation> successful RAB assignment when the transition comes from signalingPage 67
to traffic. (iMCTA) Alcatel-Lucent
UMT/IRC/DD/025012 Utran_Parameters_Description v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
<RadioAccessService>-<AlwaysOnConf>-
userSpecificInfo AoOnPchParam N.A. RNC none customer_setting Radio PS Call management Always-on Information field reserved to the user. N.A. String 0 32 AoOnPchParam 159246 Direct PCH to DCH Transition Enhancements LR13.3
<AoOnPchParam>
<RadioAccessService>-<Imcta>-
userSpecificInfo AoUpsizeRejectionCondition N.A. RNC none customer_setting Radio Call Admission Control CAC user specific info for the AO Upsize Rejection Condition N.A. String 0 32 N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<AoUpsizeRejectionCondition>
<RadioAccessService>-<ImcraImcta>-
userSpecificInfo CarrierArrivalCondition N.A. RNC none customer_setting Radio Call Admission Control CAC user specific info for the carrier arrival condition N.A. String 0 32 N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierArrivalCondition>
<RadioAccessService>-<ImcraImcta>-
userSpecificInfo CarrierRejectionCondition N.A. RNC none customer_setting Radio Call Admission Control CAC user specific info for the carrier rejection condition N.A. String 0 32 N.A. 127550 Traffic Filtering in Cell Overload LR13.1
<CarrierRejectionCondition>
information field reserved to the user.
userSpecificInfo CorrespondingRnc N.A. RNC <RNC>-<LteNeighbour>-<CorrespondingRnc> none customer_setting Radio Mobility LTE N.A. String 0 32 N.A. 100894 UMTS to LTE Handover LR14.2
No specific treatment on this field is performed by the system.
userSpecificInfo EventFramework N.A. RNC <RadioAccessService>-<EventFramework> none customer_setting Radio Call Admission Control CAC user specific info for Event framework definition for Automatic activation of ACB N.A. String 0 32 N.A. 127550 Traffic Filtering in Cell Overload LR13.1
information field reserved to the user.
userSpecificInfo LteCell N.A. RNC <RNC>-<LteNeighbour>-<LteCell> none customer_setting Radio Mobility LTE N.A. String 0 32 N.A. 100894 UMTS to LTE Handover LR14.2
No specific treatment on this field is performed by the system.
<RNC>-<LteNeighbour>- information field reserved to the user.
userSpecificInfo LteFrequencyAndBandwidth N.A. RNC none customer_setting Radio Mobility LTE N.A. String 0 32 N.A. 100894 UMTS to LTE Handover LR14.2
<LteFrequencyAndBandwidth> No specific treatment on this field is performed by the system.
LteIntelligentMultiCarrierTrafficAll <RNC>-<LteNeighbour>-<LteCell>- information field reserved to the user.
userSpecificInfo N.A. RNC none customer_setting Radio Mobility LTE N.A. String 0 32 N.A. 100894 UMTS to LTE Handover LR14.2
ocation <LteIntelligentMultiCarrierTrafficAllocation> No specific treatment on this field is performed by the system.
information field reserved to the user.
userSpecificInfo LteNeighbour N.A. RNC <RNC>-<LteNeighbour> none customer_setting Radio Mobility LTE N.A. String 0 32 N.A. 100894 UMTS to LTE Handover LR14.2
No specific treatment on this field is performed by the system.
<RadioAccessService>-<Imcta>- Information field reserved to the user.
userSpecificInfo LteNeighbourConfClass N.A. RNC none customer_setting Radio Mobility LTE N.A. String 0 32 N.A. 100894 UMTS to LTE Handover LR14.2
<LteNeighbourConfClass> No specific treatment on this field is performed by the system.
<RNC>-<NodeB>-<FDDCell>- information field reserved to the user.
userSpecificInfo LteNeighbouringCell N.A. RNC none customer_setting Radio Mobility LTE N.A. String 0 32 N.A. 100894 UMTS to LTE Handover LR14.2
<LteNeighbouringCell> No specific treatment on this field is performed by the system.
information field reserved to the user.
userSpecificInfo LtePlmn N.A. RNC <RNC>-<LteNeighbour>-<LtePlmn> none customer_setting Radio Mobility LTE N.A. String 0 32 PlmnIdentity 100894 UMTS to LTE Handover LR14.2
No specific treatment on this field is performed by the system.
UTRAN Self Optimisation (CPICH auto
userSpecificInfo SonSession N.A. RNC <RadioAccessService>-<SonSession> none customer_setting Radio Power Management [Common Channels] user friendly SON session, for operator use only (at MMI) N.A. String 0 32 N.A. 123989 LR Future
adjustment)
<RadioAccessService>-<RlcConfClass>- information field reserved to the user.
userSpecificInfo UlRlcAckFlexibleMode N.A. RNC none customer_setting Radio Synchronisation Radio synchronisation N.A. String 0 32 UlRlcAckFlexibleMode 89563 Enhanced L2 for Uplink LR13.3
<UlRlcAckFlexibleMode> No specific treatment on this field is performed by the system.
This attribute indicates the duration of time for which the UE sends the RLC
<RNC>-<LocationServices>-
utdoaTimeInterval UtdoaLocationTechnology 3 RNC none expert_tuning Transport Synchronisation Status PDUs when the UTDOA positioning method is used. When this timer ms Integer 0 3000 100 3000 131829 Support of U-TDOA over IuPC LR Future
<UtdoaLocationTechnology>
expires, the UE will be instructed to stop sending PDUS.
Total jittering budget used by the timer-based compression algorithm. (Mode: U- Robust Header Compression (ROHC - RFC
utranDlJitteringBudget RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC ms Integer 0 200 1 50 22845 LR Future
O-R; Profile = 1) 3095/4815)
Qchat UTRAN DRX cycle length coefficientUTRAN DRX cycle length=2^ Optimized performance for QCHAT (Push To
utranDrxCycLngCoef QChatConfClass 3 RNC <RadioAccessService>-<QChatConfClass> none customer_setting Radio PS Call management UTRAN Paging N.A. Integer 3 9 5 108961 UA8.1
UtranDrxCynLngCoef expressed in 10 ms radio frames Talk)
UTRAN DRX cycle length coefficient
utranDrxCycLngCoef RadioAccessService 3 RNC <RadioAccessService> none customer_tuning Radio PS Call management Always-on UTRAN DRX cycle length = 2^ UtranDrxCynLngCoef expressed in 10 ms radio N.A. Integer 3 9 6 26673 URA_PCH UA5.0
frames
<RNC>-<CellProfiles>-
RSCP threshold Low of the UTRA cell used by the UE reselection process. This Mobility between UMTS and LTE - Cell
utranThreshSLow CellSelectionInfoWithPriority 3 RNC <CellSelectionWithPriorityProfile>- none customer_tuning Radio Mobility LTE dB Integer 0 62 2 N.A. 81436 UA8.1
information is set in SIB19. Reselection
<CellSelectionInfoWithPriority>
<RNC>-<CellProfiles>-
Mobility between UMTS and LTE - Cell
utraServingCellPriority CellSelectionInfoWithPriority 3 RNC <CellSelectionWithPriorityProfile>- none customer_tuning Radio Mobility LTE Absolute priority of the serving Fdd cell set in SIB19 N.A. Integer 0 7 1 N.A. 81436 UA8.1
Reselection
<CellSelectionInfoWithPriority>
<RNC>-<CellProfiles>-
Srxlev of the UTRA cell used for neighboring measurement triggering. This Mobility between UMTS and LTE - Cell
utraSPrioritySearch1 CellSelectionInfoWithPriority 3 RNC <CellSelectionWithPriorityProfile>- none customer_tuning Radio Mobility LTE dB Integer 0 62 2 N.A. 81436 UA8.1
information is set in SIB19. Reselection
<CellSelectionInfoWithPriority>
<RNC>-<CellProfiles>-
Squal of the UTRA cell used for neighboring measurement triggering. This Mobility between UMTS and LTE - Cell
utraSPrioritySearch2 CellSelectionInfoWithPriority 3 RNC <CellSelectionWithPriorityProfile>- none customer_tuning Radio Mobility LTE dB Integer 0 7 10 81436 UA8.1
information is set in SIB19. Reselection
<CellSelectionInfoWithPriority>
DynamicParameterForEdchTti10 <RadioAccessService>-<UlRbSetConf>- Defines the number of E-DCH sub-frames received to consider partial UL SIR
validityCondition 3 RNC none system_restricted Radio HSUPA Power Control N.A. Integer 0 255 0 33307 e-DCH Link Quality Control UA6.0
ms <DynamicParameterForEdchTti10ms> target calculated over the update period as valid
DynamicParameterForEdchTti2m <RadioAccessService>-<UlRbSetConf>- Defines the number of E-DCH sub-frames received to consider partial UL SIR
validityCondition 3 RNC none system_restricted Radio HSUPA Power Control N.A. Integer 0 255 0 33307 e-DCH Link Quality Control UA6.0
s <DynamicParameterForEdchTti2ms> target calculated over the update period as valid
<RadioAccessService>-<UlRbSetConf>- The number of CRCs received to consider Partial UL SIR target calculated over Power Control and Rate Matching
validityCondition DynamicParameterPerDch 3 RNC none expert_tuning Radio Power Management Power Control N.A. Integer 0 255 0 28040 UA4.2
<DynamicParameterPerDch> the update period as valid. enhancements
The parameter defines four amplitude coefficients applicable to VAM matrix in a (1.000000000,1.000000000,1.00000000
vamAmplitudeCoeff VamParameters 3 BTS <BTSEquipment>-<BTSCell>-<VamParameters> partial system_restricted Radio HSDPA MIMO N.A. Float 0 1 0,000000001 83984 2*2 MIMO UA8.1
MIMO or non-MIMO cell. 0,1.000000000)
The parameter defines four phase coefficients applicable to VAM matrix in a
vamPhaseCoeff VamParameters 3 BTS <BTSEquipment>-<BTSCell>-<VamParameters> partial system_restricted Radio HSDPA MIMO deg Integer 0 359 1 (0,135,45,0) 83984 2*2 MIMO UA8.1
MIMO or non-MIMO cell.
vc VCC 0 BTS <BTSEquipment>-<VCC> partial customer_setting Transport ATM VC identifier N.A. Integer 32 255 N.A. 13464 Multiple PCM Iub connection without IMA UA2.0
vccId AAL2Bearer 0 BTS <BTSEquipment>-<AAL2Bearer> none customer_setting Transport ATM rdn Identifier of the VCC object used for this link. N.A. ServiceLink N.A. 13464 Multiple PCM Iub connection without IMA UA2.0
vccId AlcapBearer 0 BTS <BTSEquipment>-<AlcapBearer> none customer_setting Transport ATM ALCAP This is the VCC RDN used by this ALCAP BEARER N.A. ServiceLink N.A. 28018 3GPP compliant Iub: Alcap UA6.0
vccId CCP 0 BTS <BTSEquipment>-<CCP> none customer_setting Transport IP rdn Identifier of the VCC object used for this link. N.A. ServiceLink N.A. 27649 Native IP Iub support UA7.1
vccId NodeBCP 0 BTS <BTSEquipment>-<NodeBCP> critical customer_setting Transport IP rdn Identifier of the VCC object used for this link. N.A. ServiceLink N.A. 27649 Native IP Iub support UA7.1
vccId RouteCes 0 BTS <BTSEquipment>-<RouteCes> critical customer_tuning Transport ATM rdn Identifier of the VCC object used for this link. N.A. ServiceLink N.A. 25069 CES support in Node-B/iCCM LR Future
Defines the Vertical Accuracy, which will be requested to UE for its location fix. It
AGPSUeBasedLocationTechnolo <RNC>-<LocationServices>-
verticalAccuracyRequestedtoUe 3 RNC none expert_tuning Radio Location Services is expressed as "uncertainty code" k. So the uncertainty in meter is derived from N.A. Integer 0 127 127 22842 Network Assisted GPS Enhancements UA4.1
gy <AGPSUeBasedLocationTechnology>
formula r = 45*(1.025(^k)-1) in meters. Cf. 23.032
<BTSEquipment>-<IpRan>-
virtualInterfaceId MaintenanceAssociation 0 BTS none customer_setting Transport Ethernet Identifier of the Ethernet Port or of the LAG used by this maintenance association ServiceLink N.A. 103182 Ethernet OAM in the Node B LR Future
<MaintenanceAssociation>
virtualInterfaceId UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none customer_setting Transport Unused (optional) link to the Virtual Interface on which UdpMux flow is to be sent. N.A. ServiceLink N.A. 89716 UDP multiplexing on Iub (iBTS) Cancelled
virtualInterfaceId UdpMuxInfo 3 BTS <BTSEquipment>-<IpRan>-<UdpMuxInfo> none expert_tuning Transport Unused (optional) link to the Virtual Interface on which UdpMux flow is to be sent. N.A. ServiceLink N.A. 89716 UDP multiplexing on Iub (iBTS) Cancelled
indicates the VLAN to be used at Node B side for UL traffic for the traffic flow
vlanId VirtualInterface 0 BTS <BTSEquipment>-<IpRan>-<VirtualInterface> critical customer_setting Transport IP N.A. Integer 0 4095 1 N.A. 79362 Flexible Operator Configurable Split IP Iub UA8.1
associated to the considered VirtualInterface.
RNC Connection to multiple Core Network
vMapping CsFlexService 3 RNC <RNC>-<CsFlexService> none system_restricted Transport Iu Flex N.A. ServiceLink N.A. 29417 UA5.0
nodes (Iu-Flex)
RNC Connection to multiple Core Network
vMapping PsFlexService 3 RNC <RNC>-<PsFlexService> none system_restricted Transport Iu Flex N.A. ServiceLink N.A. 29417 UA5.0
nodes (Iu-Flex)
voiceEnhancedSchedulerActivation BTSEquipment 3 BTS <BTSEquipment> none customer_setting Radio HSDPA Scheduler Activation of the enhance scheduler for voice RAB mapped onto HSDPA N.A. Enumerate enhanceSchedulerForVoiceDeactivated 36247 Cs Voice over HSPA LR15.1
vp VCC 0 BTS <BTSEquipment>-<VCC> partial customer_setting Transport ATM vp Identifier N.A. Integer 0 7 N.A. 18855 UTRAN Sharing UA3.1
Threshold level for VSWR (Voltage Standing Wave Ratio) Level 2 Alarm (ARD-
vSWRAlarmThresholdLevel2 BTSEquipment 3 BTS <BTSEquipment> none customer_tuning BTS Alarms dB Integer 8 15 1 9 159393 Configurable VSWR Alarm Threshold LR13.1
0546)
Threshold level for VSWR (Voltage Standing Wave Ratio) Level 3 Alarm (ARD-
vSWRAlarmThresholdLevel3 BTSEquipment 3 BTS <BTSEquipment> none customer_tuning BTS Alarms dB Integer 6 13 1 6 159393 Configurable VSWR Alarm Threshold LR13.1
0546)
<RadioAccessService>-<DedicatedConf>-
w Cdma1xEvent3a 3 RNC <MeasurementCdma1xConfClass>- none customer_tuning Radio Mobility [HHO][CDMA] N.A. Float 0 2 0,1 0 33853 Support of WCDMA to CDMA Handover UA4.1K
<Cdma1xEvent3a>
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for PS HSDPA DL
w1 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> plus EDCHUL.Avg part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS SPEECH plus
w10 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> PS DCH plus PS HSDPA part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS DATA part of
w11 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS SPEECH plus
w12 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> PS DCH part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for PS HSDPA plus
w13 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> DL DCH plus EDCH UL part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for PS DCH plus PS
w14 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> DCH part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for PS DCH plus PS
w15 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> HSDPA part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for other part of the
w16 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for signalling part of
w17 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied for the average number in CELL FACH part of the
w18 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS DATA plus PS
w2 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> HSDPA part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS Streaming
w3 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for PS DCH DL plus
w4 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> DCH UL part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for PS HSDPA plus
w5 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> DCH UL part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS SPEECH plus
w6 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> PS DCH plus PS DCH part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS SPEECH part
w7 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS DATA plus PS
w8 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> DCH part of the Auto carrier switch off formula
<RadioAccessService>-<DedicatedConf>- The weighting to be applied to the average RLs established for CS SPEECH and
w9 AutoSwitchOffConfClass 3 RNC none system_restricted Radio Power Management SwitchOff N.A. Integer -64 63 0 34396 Automatic Carrier Switchoff UA7.1
<AutoSwitchOffConfClass> HSDPA part of the Auto carrier switch off formula
Waiting time before triggering resource (OVSF codes) release in order to Parameter Class Evolution in UA08 & UTRAN
waitForResourceReleaseForHsxpaConfiguration FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSDPA Configuration min Mixed 0 1440 infinite 80685 UA8.1
configure HSDPA and/or EDCH in the cell. model simplification
<RNC>-<NodeB>-<FDDCell>- Waiting time before triggering resource (OVSF codes) release in order to Parameter Class Evolution in UA08 & UTRAN
waitForResourceReleaseForOcnsConfiguration OCNSChannelsParameters 3 RNC none customer_setting Radio Power Management OCNS min Mixed 0 1440 infinite 80685 UA8.1
<OCNSChannelsParameters> configure OCNS in the cell. model simplification
This parameter specifies the wait time before the number of HARQ processes is
waitPeriodBeforeHarqChange BTSEquipment 3 BTS <BTSEquipment> none expert_tuning Radio PS Call management CAC ms Integer 0 10000 1 1000 126055 UL radio overload handling enhancements LR13.1
changed.
Determines the time UE should wait before attempting a new Cell Update
waitTimeAoFiltering FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Call Admission Control CAC s Integer 0 15 1 15 127550 Traffic Filtering in Cell Overload LR13.1
message
Parameter Class Evolution in UA08 & UTRAN
waitTimeBeforeHspaDeactivation FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio HSDPA Configuration Waiting time before triggering HSDPA and/or EDCH deactivation in the cell. min Mixed 0 1440 infinite 80685 UA8.1
model simplification
This parameter defines the wait time to provide to the UE in the Rrc Connection iMCRA - traffic balancing at RRC connection
waitTimeImcraRedirectFailure FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none customer_setting Radio Mobility RRC Redirection Reject message in case of redirection of an emergency call or CS speech call to s Integer 0 15 1 89857 establishment with Programmable Actions UA8.1
2G or in case of redirection of any call to another UMTS FDD carrier or to LTE Matrix
Reject procedure info (ref. 3G TS25.331 V3.3.0 10.3.3.48): Time period the UE
waitTimeOnRrcConnectionRejection ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none system_restricted Radio Accessibility 3G2G RRC Redirection has to wait before repeating the access procedure. 0 indicates repetition not s Integer 0 15 15 32580 3G/2G redirection enhancement for E911 calls LR Future
allowed
Wait Time parameter to provide to the UE in the case of Rrc Connection Reject
waitTimeRejectQQualMin ServiceInit 3 RNC <RadioAccessService>-<ServiceInit> none system_restricted Radio Accessibility 3G2G RRC Redirection message for UE not satisfying the cell selection criteria based on qQualMin. The s Integer 0 15 10 32580 3G/2G redirection enhancement for E911 calls LR Future
value 0 indicates that the repetition is not allowed.
Determines the time UE should wait before attempting a new RRC Connection
waitTimeRrcFiltering FDDCell 3 RNC <RNC>-<NodeB>-<FDDCell> none expert_tuning Radio Call Admission Control CAC s Integer 0 15 1 15 127550 Traffic Filtering in Cell Overload LR13.1
Request
<RadioAccessService>-<DedicatedConf>- This parameter defines the weight to configure for the triggering of Event 1A in
weight1A Event1AHoConfInSib11 3 RNC none system_restricted Radio Mobility [SHO] N.A. Float 0 2 0,1 0 79163 Configurable weighting factor W UA6.0
<HoConfClass>-<Event1AHoConfInSib11> SIB11.
<RadioAccessService>-<DedicatedConf>-
FullEventHOConfHhoMgtEvent1A <HoConfClass>-<UsHoConf>- This parameter defines the weight to configure for the triggering of intraFreq-
weight1A 3 RNC none system_restricted Radio Mobility [SHO] N.A. Float 0 2 0,1 0 79163 Configurable weighting factor W UA6.0
WithoutIur <FullEventHOConfHhoMgt>- interRnc event in Full Event Mode.
<FullEventHOConfHhoMgtEvent1AWithoutIur>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the weight to configure for the triggering of event 1A in
weight1A FullEventHOConfShoMgtEvent1A 3 RNC none system_restricted Radio Mobility [SHO] N.A. Float 0 2 0,1 0 79163 Configurable weighting factor W UA6.0
<FullEventHOConfShoMgt>- Full Event mode
<FullEventHOConfShoMgtEvent1A>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the weight to configure for the triggering of event 1B in
weight1B FullEventHOConfShoMgtEvent1B 3 RNC none system_restricted Radio Mobility [SHO] N.A. Float 0 2 0,1 0 79163 Configurable weighting factor W UA6.0
<FullEventHOConfShoMgt>- Full Event mode
<FullEventHOConfShoMgtEvent1B>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the weight to configure for the triggering of event 2D in
weight2D FullEventHOConfHhoMgtEvent2D 3 RNC none system_restricted Radio Mobility [HHO] N.A. Float 0 2 0,1 0 79163 Configurable weighting factor W UA6.0
<FullEventHOConfHhoMgt>- Full Event mode
<FullEventHOConfHhoMgtEvent2D>
<RadioAccessService>-<DedicatedConf>-
<HoConfClass>-<UsHoConf>- This parameter defines the weight to configure for the triggering of event 2F in
weight2F FullEventHOConfHhoMgtEvent2F 3 RNC none system_restricted Radio Mobility [HHO] N.A. Float 0 2 0,1 0 79163 Configurable weighting factor W UA6.0
<FullEventHOConfHhoMgt>- Full Event mode
<FullEventHOConfHhoMgtEvent2F>
<RadioAccessService>-<OverloadInfo>- It is a factor to reflect the previous BHCA measurement and the last BHCA
weightFactor ReceivingRanapOverloadControl 3 RNC <RanapOverloadControl>- none system_restricted Radio Load Management RANAP measurement in the calculation of the current BHCA after receiving the RANAP N.A. Float 0 0,9 0,1 0,5 33804 Manual Overload Control UA5.0
<ReceivingRanapOverloadControl> OVERLOAD CONTROL message from CN
Sliding window for W-LSB Encoding, in number of reference values. (Mode: U-O; Robust Header Compression (ROHC - RFC
wLsbSlidingWindow RoHcConf 3 RNC <RadioAccessService>-<RoHcConf> none expert_tuning Radio Protocols ROHC N.A. Integer 1 255 18 22845 LR Future
Profile >= 1) 3095/4815)
List of wpsPriorities .Identifies the values of 'Allocation/Retention Priority' sub-
wpsPrioritiesList Imcta 3 RNC <RadioAccessService>-<Imcta> none customer_tuning Radio Mobility [HHO][iMCTA] parameter 'Priority Level' in the RANAP RAB Assignment Request that are N.A. Integer 0 15 (2, 3, 4, 5, 6) 32601 iMCTA enhancement for WPS UA6.0
accepted as Wireless Priority Service (WPS) calls.
Length of time the source RNC will await a response from the CN after sending a
wpsTRelocPrep Imcta 3 RNC <RadioAccessService>-<Imcta> none system_restricted Radio Mobility [HHO][iMCTA] s Integer 1 180 180 32601 iMCTA enhancement for WPS UA6.0
RELOCATION REQUIRED message to the CN
<RNC>-<NodeB>-<FDDCell>-
Scheme2Cdma1xCellSelectionInf
xBOffExp 3 RNC <Cdma1xMobilityInfo>-<Cdma1xCellSelectionInfo>- none system_restricted Radio Mobility [HHO][CDMA] Used in 1X CDMA search interval ping-pong formula N.A. Integer 0 10 3 33853 Support of WCDMA to CDMA Handover UA6.0
o
<Scheme2Cdma1xCellSelectionInfo>
This parameter contains the list of classes that can be included in the range.
xrangeAccessClasses AutomatedCellBarring 3 RNC <RadioAccessService>-<AutomatedCellBarring> none expert_tuning Radio Load Management Cell Barring There are 10 access classes. This parameter needs to define which group of N.A. BitString 10 10 1111111111 31805 Automatic Cell Barring on Service Outage UA5.0
classes can be used for barring. Normally all classes are used.
xtrmCarrierCapacityLicensing Capacity 3 BTS <BTSEquipment>-<Capacity> none customer_init BTS Capacity Licensing Number supplementary RX carrier allowed for xTRM. N.A. Mixed 0 65534 infinite 16746 Capacity licensing UA6.0
xxPchPagingTimer RadioAccessService 3 RNC <RadioAccessService> none system_restricted Radio Accessibility Paging Procedure Timer for paging the UE for the CN in URAPCH mode s Integer 0 300 15 0 none UA7.1
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on code load to transition from yellow to
yellow2GreenCLCThreshold IrmOnCellColourParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 30 22841 iRM Cell colour calculation UA3.0
<CacConfClass>-<IrmOnCellColourParameters> green.
Threshold used for decision of transition of Dl CEM Cell Load Color from Yellow
<RadioAccessService>-<DedicatedConf>- to Green.
yellow2GreenDlCEMThreshold DlIrmCEMParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 100 27741 CEM load in iRM UA5.0
<NodeBConfClass>-<DlIrmCEMParameters> For set OnLine, new value to be taken into account after Next estimation of CEM-
Load
<RadioAccessService>-<DedicatedConf>- Threshold (in %) used for decision of transition of Downlink Transport cell Load
yellow2GreenDlTLCThreshold IrmIubTransportLoadParameters 3 RNC <NodeBConfClass>- none expert_tuning Radio Call Admission Control IRM Color from Yellow to Green.For a set On-line, new value to be taken into account % Integer 0 100 60 27740 Iub load in iRM UA4.2
<IrmIubTransportLoadParameters> after Next Iub Transport Load measurement.
This parameter defines the threshold on HSPA Downlink codes cell load to
<RadioAccessService>-<DedicatedConf>- transition from yellow to green. The value indicates the percentage of the cell
yellow2GreenHspaCodesDlLoadThreshold HspaCellLoadParameters 3 RNC none expert_tuning Radio Call Admission Control HSDPA Load Color % Integer 0 100 1 57 81213 Load balancing between HSPA carriers UA7.1.2
<CacConfClass>-<HspaCellLoadParameters> capacity being occupied, i.e. not available to a new user. The lower the value, the
more capacity is a
This parameter defines the threshold on HSPA Downlink power cell load to
<RadioAccessService>-<DedicatedConf>- transition from yellow to green. The value indicates the percentage of the cell
yellow2GreenHspaPwrDlLoadThreshold HspaCellLoadParameters 3 RNC none expert_tuning Radio Call Admission Control HSDPA Load Color % Integer 0 100 1 57 81213 Load balancing between HSPA carriers UA7.1.2
<CacConfClass>-<HspaCellLoadParameters> capacity being occupied, i.e. not available to a new user. The lower the value, the
more capacity is a
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on power load to transition from yellow to
yellow2GreenPLCThreshold IrmOnCellColourParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 30 22841 iRM Cell colour calculation UA3.0
<CacConfClass>-<IrmOnCellColourParameters> green.
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on UL CEM load to transition from Yellow
yellow2GreenUlCEMThreshold UlIrmCEMParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 100 27741 CEM load in iRM UA5.0
<NodeBConfClass>-<UlIrmCEMParameters> to Green
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on UL radio load to transition from Yellow
yellow2GreenUlRadioLoadThreshold UlIrmRadioLoadParameters 3 RNC none expert_tuning Radio Call Admission Control UL Radio Load % Integer 0 100 100 27745 UL Load Estimation UA5.0
<CacConfClass>-<UlIrmRadioLoadParameters> to Green
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on code load to transition from yellow to
yellow2RedCLCThreshold IrmOnCellColourParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 70 22841 iRM Cell colour calculation UA3.0
<CacConfClass>-<IrmOnCellColourParameters> red.
Threshold used for decision of transition of Dl CEM Cell Load Color from Yellow
<RadioAccessService>-<DedicatedConf>- to Red.
yellow2RedDlCEMThreshold DlIrmCEMParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 100 27741 CEM load in iRM UA5.0
<NodeBConfClass>-<DlIrmCEMParameters> For set OnLine, new value to be taken into account after Next estimation of CEM-
Load
<RadioAccessService>-<DedicatedConf>-
Threshold (in %) used for decision of transition of Downlink Transport cell Load
yellow2RedDlTLCThreshold IrmIubTransportLoadParameters 3 RNC <NodeBConfClass>- none expert_tuning Radio Call Admission Control IRM % Integer 0 100 90 27740 Iub load in iRM UA4.2
Color from Yellow to Red.
<IrmIubTransportLoadParameters>
This parameter defines the threshold on HSPA Downlink codes cell load to
<RadioAccessService>-<DedicatedConf>- transition from yellow to red. The value indicates the percentage of the cell
yellow2RedHspaCodesDlLoadThreshold HspaCellLoadParameters 3 RNC none expert_tuning Radio Call Admission Control HSDPA Load Color % Integer 0 100 1 91 81213 Load balancing between HSPA carriers UA7.1.2
<CacConfClass>-<HspaCellLoadParameters> capacity being occupied, i.e. not available to a new user. The lower the value, the
more capacity is ava
This parameter defines the threshold on HSPA Downlink power cell load to
<RadioAccessService>-<DedicatedConf>- transition from yellow to red. The value indicates the percentage of the cell
yellow2RedHspaPwrDlLoadThreshold HspaCellLoadParameters 3 RNC none expert_tuning Radio Call Admission Control HSDPA Load Color % Integer 0 100 1 91 81213 Load balancing between HSPA carriers UA7.1.2
<CacConfClass>-<HspaCellLoadParameters> capacity being occupied, i.e. not available to a new user. The lower the value, the
more capacity is ava
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on power load to transition from yellow to
yellow2RedPLCThreshold IrmOnCellColourParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 70 22841 iRM Cell colour calculation UA3.0
<CacConfClass>-<IrmOnCellColourParameters> red.
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on UL CEM load to transition from Yellow to
yellow2RedUlCEMThreshold UlIrmCEMParameters 3 RNC none expert_tuning Radio Call Admission Control IRM % Integer 0 100 100 27741 CEM load in iRM UA5.0
<NodeBConfClass>-<UlIrmCEMParameters> Red
<RadioAccessService>-<DedicatedConf>- This parameter defines the threshold on UL radio load to transition from Yellow
yellow2RedUlRadioLoadThreshold UlIrmRadioLoadParameters 3 RNC none expert_tuning Radio Call Admission Control UL Radio Load % Integer 0 100 100 27745 UL Load Estimation UA5.0
<CacConfClass>-<UlIrmRadioLoadParameters> to Red
Nombre de ActivationParam_id
Feature_release feature_id Feature_Title ActivationParam_id ActivationObject_id Default value in GM templates Features Activation - NEA recommendation Total
Prior to UA5 13447 3G to 2G Handover with GSM measurements (With and without Compressed MactivationHoGsmCsAllowed RadioAccessService TRUE (vide) 1
activationHoGsmPsAllowed RadioAccessService TRUE (vide) 1
isBlindHoGsmAllowed NeighbouringRNC FALSE (vide) 1
isBlindHoRescueAllowed RadioAccessService FALSE (vide) 1
isGsmCModeActivationAllowed DlUserService FALSE/TRUE depending on service, see templates 1
isPatternAllowed CModePatternSeqInfo TRUE (vide) 1
13448 2G to 3G Handover for CS Domain is2GTo3GCSHandoverAllowedWithinRnc RadioAccessService unset FALSE 1
13451 3G to 2G Redirect for speech calls is3Gto2GConversationalCallRedirectOnRrcEstabFailAllowed RadioAccessService unset TRUE 1
13473 Always On: User management with two-step downsizing isAlwaysOnAllowed DlRbSetConf FALSE/TRUE depending on service, see templates 1
DlUserService FALSE/TRUE depending on service, see templates 1
UlRbSetConf FALSE/TRUE depending on service, see templates 1
UlUserService FALSE/TRUE depending on service, see templates 1
13475 RAB Matching Algorithm enabledForRABMatching DlRbSetConf FALSE/TRUE depending on service, see templates 1
DlUserService FALSE/TRUE depending on service, see templates 1
UlRbSetConf FALSE/TRUE depending on service, see templates 1
UlUserService FALSE/TRUE depending on service, see templates 1
isIrmOnRlConditionAllowed RadioAccessService TRUE (vide) 1
isUeCapabilitiesInRabMatchingAllowed RadioAccessService TRUE (vide) 1
isUeCapabilitiesInRabMatchingAllowedForPhyAndRlc RadioAccessService TRUE (vide) 1
13497 Orthogonal Channel Noise simulation OCNSActivation FDDCell FALSE (vide) 1
17569 Hard Handover Inter-RNC Inter-Frequency without Iur is3Gto3GWithoutIurAllowedForCS RadioAccessService TRUE (vide) 1
is3Gto3GWithoutIurAllowedForPS RadioAccessService TRUE (vide) 1
isInterFreqMeasActivationAllowed RadioAccessService TRUE (vide) 1
18855 UTRAN Sharing None None None (vide) 1
19794 Hard Handover Intra-RNC Inter-Frequency with Compressed Mode is3Gto3GWithoutIurAllowedForCS RadioAccessService TRUE (vide) 1
is3Gto3GWithoutIurAllowedForPS RadioAccessService TRUE (vide) 1
isEdchHhoWithMeasAllowed RadioAccessService TRUE (vide) 1
isHsdpaHhoWithMeasAllowed RadioAccessService TRUE (vide) 1
isInterFreqCModeActivationAllowed DlUserService TRUE except for SRB, for which setting is FALSE 1
isInterFreqMeasActivationAllowed RadioAccessService TRUE (vide) 1
isNeighbouringCellOffsetAllowed NeighbouringRNC TRUE (vide) 1
isPatternAllowed CModePatternSeqInfo TRUE (vide) 1
20519 Power Balancing isPowerBalancingAllowed RadioAccessService TRUE (vide) 1
powerBalancingRequired DlUserService TRUE (vide) 1
21053 SHO leg initial power calculation enhancement isShoLegInitialPowerAlgoEnabled RadioAccessService TRUE (vide) 1
21091 IMSI Based Handover isImsiHoApplicable NationalRoaming TRUE (vide) 1
22841 iRM Cell colour calculation isIrmOnCellColourAllowed RadioAccessService TRUE (vide) 1
22842 Network Assisted GPS Enhancements isEmissionOfUpGpsAcquisitionAssistanceAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
isEmissionOfUpGpsAlmanacAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
isEmissionOfUpGpsIonosphericModelAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
isEmissionOfUpGpsNavigationModelAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
isEmissionOfUpGpsRealTimeIntegrityAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
isEmissionOfUpGpsReferenceLocationAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
isEmissionOfUpGpsReferenceTimeAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
isEmissionOfUpGpsUtcModelAllowed AGPSUeBasedLocationTechnology TRUE (vide) 1
23332 iRM Scheduling upgrading based on radio conditions isIrmSchedulingUpgradeAllowed RadioAccessService TRUE (vide) 1
24082 MSA32 Enhancement to sustain 28 E1 with IMA None None None (vide) 1
25075 iRM Pre-emption isIrmPreemptionAllowed RadioAccessService TRUE FALSE 1
isIrmPreemptionAllowedForBronzeUsers IrmPreemption TRUE (vide) 1
isIrmPreemptionAllowedForGoldUsers IrmPreemption TRUE (vide) 1
isIrmPreemptionAllowedForSilverUsers IrmPreemption TRUE (vide) 1
25100 UTRAN Call Trace: Additional measurement reporting None None None (vide) 1
25145 3G to 2G Redirection for Emergency calls emergencyLocationServiceActivationAllowed LocationServices unset FALSE 1
is3Gto2GRedirectForEmergencyAllowed FDDCell TRUE (vide) 1
isUeBasedAgpsAllowed FDDCell FALSE (vide) 1
NeighbouringRNC FALSE (vide) 1
ueBasedAgpsActivationAllowed LocationServices unset FALSE 1
26234 Node B support of 2 IP addresses None None None (vide) 1
26276 9314 Pico NodeB None None None (vide) 1
26386 TMA AISG None None None (vide) 1
26407 IPsec Support Validation on RNC None None None (vide) 1
26409 Support of RADIUS Client on RNC None None None (vide) 1
26521 RNC supports QAAL2 Alternate Routing iubIfId NodeB N.A. (vide) 1
iucsIfId CsCoreNetworkAccess N.A. (vide) 1
iurIfId NeighbouringRNC N.A. (vide) 1
sccpDestinationPointCode CsCoreNetworkAccess N.A. (vide) 1
NeighbouringRNC N.A. (vide) 1
PsCoreNetworkAccess N.A. (vide) 1
sccpNetworkIndicator CsCoreNetworkAccess N.A. (vide) 1
NeighbouringRNC N.A. (vide) 1
PsCoreNetworkAccess N.A. (vide) 1
26614 RNC Support QAAL2 Address translation None None None (vide) 1
27120 xTRM None None None (vide) 1
27219 Intra-frequency Event-triggered Measurements isDetectedSetCellsAllowed RadioAccessService FALSE (vide) 1
isEventTriggeredMeasAllowed FDDCell TRUE (vide) 1
27330 RB adaptation based on traffic: DL and UL with start @64kbit/s isDlRbRateAdaptationAllowed RadioAccessService TRUE (vide) 1
isDlRbRateAdaptationAllowedForThisDlRbSetConf DlRbSetConf FALSE/TRUE depending on DlUserService, see templates 1
isDlRbRateAdaptationAllowedForThisDlUserService DlUserService FALSE/TRUE depending on DlUserService, see templates 1
isThisRbRateAdaptationDlRbSetTargetAllowed DlRbSetConf FALSE/TRUE depending on DlUserService, see templates 1
isThisRbRateAdaptationUlRbSetTargetAllowed UlRbSetConf FALSE/TRUE depending on DlUserService, see templates 1
isUlRbRateAdaptationAllowed RadioAccessService TRUE (vide) 1
isUlRbRateAdaptationAllowedForThisUlRbSetConf UlRbSetConf FALSE/TRUE depending on service, see templates 1
isUlRbRateAdaptationAllowedForThisUlUserService UlUserService FALSE/TRUE depending on service, see templates 1
27597 Service-based Inter-Frequency / Inter-RAT selection for HHO None None None (vide) 1
27639 MSS7400 2 Port STM-1 Optical Channelized card None None None (vide) 1
27729 UA04.2 Counters evolution None None None (vide) 1
27740 Iub load in iRM isDlIubTransportLoadColourCalculationEnabled RadioAccessService TRUE (vide) 1
27901 UA04.2 Parameters evolution None None None (vide) 1
27930 HSDPA service None None None (vide) 1
27931 HSDPA Flexible Resources Management None None None (vide) 1
27932 HSDPA Step1 hsdpaActivation FDDCell FALSE depending on HSDPA activation in each cell 1
hsdpaResourceActivation BTSCell FALSE depending on HSDPA activation in each cell 1
isHsdpaAllowed RadioAccessService unset TRUE 1
isRLCReconfigurationForChannelTypeSwitching HsdpaRncConf TRUE (vide) 1
27937 HSDPA Alarm Mobility None None None (vide) 1
27939 HS-SCCH Power Control None None None (vide) 1
27940 H-BBU Pool Across Sectors None None None (vide) 1
27941 Node B Module Operation for HSDPA None None None (vide) 1
27942 Always On on HSDPA isAlwaysOnAllowed DlUserService FALSE/TRUE depending on service, see templates 1
UlUserService FALSE/TRUE depending on service, see templates 1
27945 HSDPA Radio Bearers None None None (vide) 1
27947 PS I/B UL 384 None None None (vide) 1
28036 Mobility Performance Improvements None None None (vide) 1
28040 Power Control and Rate Matching enhancements isDlReferenceTransportChannelAllowed DlRbSetConf TRUE (vide) 1
isUlOuterPCActivated UlOuterLoopPowerCtrl TRUE (vide) 1
28109 3GPP baseline and additional CRs None None None (vide) 1
28144 iRM Scheduling downgrading based on TxCP isIrmSchedDowngradeTxcpAllowed DlUsPowerConf FALSE/TRUE depending on DlUserService, see templates 1
RadioAccessService TRUE (vide) 1
isTransCodePowerIrmSchedulingDowngradeAllowedFromThisDlUserService DlUserService FALSE/TRUE depending on DlUserService, see templates 1
28302 Y Splitter at RNC None None None (vide) 1
28330 PS Streaming up to 128kbit/s None None None (vide) 1
28331 PS Streaming up to 128kbit/s + PS I/B 8kbit/s None None None (vide) 1
28847 Change of SAI reporting None None None (vide) 1
28900 STSR1+1 Node B None None None (vide) 1
28940 9313 Micro NodeB None None None (vide) 1
29361 Handover and RRM confclass range extension None None None (vide) 1
29928 UMTS dBTS 2U None None None (vide) 1
30015 DDM AISG None None None (vide) 1
30038 Node B CAC: Max HSDPA users per Node B None None None (vide) 1
30311 RAB based CAC None None None (vide) 1
30416 MCPA 60W 2100 MHz None None None (vide) 1
External-Document Page 70 Alcatel-Lucent
31860 BTS HW Readiness for Global RRH Support None None None (vide) 1
32023 dCompact None None None (vide) 1
UMT/IRC/DD/025012 Activation_Flags_Pivot v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
Prior to UA5 32531 OIM for RRH None None None (vide) 1
33032 Reta Through Feeders None None None (vide) 1
33110 RRH 2100 MHz for EMEA None None None (vide) 1
33804 Manual Overload Control isManualOVControlAllowed NodeB FALSE (vide) 1
Q00833055 KPI - Quick repeat of RRC Connection Setup message isQuickRepeatActivated FDDCell TRUE (vide) 1
isQuickRepeatAllowed CallAccessPerformanceConf TRUE (vide) 1
Q00833060 KPI - Increase FACH Power while repeating RRC Connection Setup message isFachPowerAdjustmentActivated FDDCell FALSE TRUE 1
isFachPowerAdjustmentEnabled CallAccessPerformanceConf TRUE (vide) 1
Q00834365 Adaptative RLC Status Filter isAdaptiveRlcStatusFilterAllowed AdaptiveRlcStatusFilterConf TRUE (vide) 1
Q00982818 none shoAfterBlockingPhaseEnable RadioAccessService TRUE (vide) 1
UA5.0 18717 AMR Rate Adaptation allowedIuUpVersion CsCoreNetworkAccess V2OrV1 (vide) 1
isAmrMultiModeAllowed RadioAccessService disabled FALSE 1
isAmrMultiModeSetupAllowed FDDCell FALSE (vide) 1
isCnInitiatedRateControlAllowed CsCoreNetworkAccess TRUE (vide) 1
isSrb5Allowed RadioAccessService FALSE (vide) 1
18880 SRNS Relocation with Iur is3Gto3GWithIurAllowed RadioAccessService unset TRUE 1
isIncoming3Gto3GWithIurAllowedForCsConversational NeighbouringRNC TRUE (vide) 1
isIncoming3Gto3GWithIurAllowedForCsStreaming NeighbouringRNC TRUE (vide) 1
isIncoming3Gto3GWithIurAllowedForPsBackground NeighbouringRNC TRUE (vide) 1
isIncoming3Gto3GWithIurAllowedForPsInteractive NeighbouringRNC TRUE (vide) 1
isIncoming3Gto3GWithIurAllowedForPsStreaming NeighbouringRNC TRUE (vide) 1
isOutgoing3Gto3GWithIurAllowedForCsConversational NeighbouringRNC TRUE (vide) 1
isOutgoing3Gto3GWithIurAllowedForCsStreaming NeighbouringRNC TRUE (vide) 1
isOutgoing3Gto3GWithIurAllowedForPsBackground NeighbouringRNC TRUE (vide) 1
isOutgoing3Gto3GWithIurAllowedForPsInteractive NeighbouringRNC TRUE (vide) 1
isOutgoing3Gto3GWithIurAllowedForPsStreaming NeighbouringRNC TRUE (vide) 1
23333 Node B capacity model at the RNC isUlTokenCacAtRncAllowed RadioAccessService TRUE (vide) 1
24075 Paging repetition enhancements isPagingRepetitionAllowed RadioAccessService FALSE TRUE 1
24377 RNC list of active alarms None None None (vide) 1
24837 Uplink iRM isUlIrmOnCellColourAllowed RadioAccessService TRUE (vide) 1
ulIrmTableConfClassId UlRbSetConf N.A. (vide) 1
25080 QoS differentiation based on TC, ARP and THP activateOls RadioAccessService unset TRUE 1
25605 UL Call Admission Control Improvement None None None (vide) 1
26673 URA_PCH pchRrcStates RadioAccessService None (vide) 1
isCellUpdateWaitTimeForPchUeAllowed RadioAccessService FALSE TRUE for networks with RRC signaling storms (Smartphone) 1
isDirectTransitionFromPchToIdleAllowed ServiceInit FALSE TRUE for networks with RRC signaling storms (Smartphone) 1
27083 AAL2 CAC per VCC option None None None (vide) 1
27741 CEM load in iRM isCEMColourCalculationEnabled RadioAccessService TRUE (vide) 1
isCEMModelValidForDlColour NodeBConfClass TRUE (vide) 1
isCEMModelValidForUlColour NodeBConfClass TRUE (vide) 1
27745 UL LOAD ESTIMATION isRtwpReferenceSelfLearning BTSEquipment TRUE (vide) 1
isUlRadioLoadColourEnabled NodeBConfClass FALSE TRUE 1
isUplinkRadioLoadEnabled RadioAccessService TRUE (vide) 1
rtwpMaxCellLoadCacActivation BTSCell FALSE (vide) 1
27805 AMR mode change during the call isAmrRateControlDuringTheCallAllowed RadioAccessService FALSE (vide) 1
28333 Speech + PS Streaming up to 256kbit/s ( + PS I/B 8kbit/s) None None None (vide) 1
29400 Enhanced RRM for High Quality Streaming isStreamingOverDchEnhancementsEnable RadioAccessService unset TRUE 1
29415 intelligent Multi-Carrier Traffic Allocation (iMCTA) alarmPriorityTableConfClassId FddIntelligentMultiCarrierTrafficAllocation N.A. depending on customer strategy for imcta; see doc UMT/IRC/INF/032536 1
NeighbouringRNCIntelligentMultiCarrierTrafficAllocation N.A. depending on customer strategy for imcta; see doc UMT/IRC/INF/032536 1
cacPriorityTableConfClassId FddIntelligentMultiCarrierTrafficAllocation N.A. depending on customer strategy for imcta; see doc UMT/IRC/INF/032536 1
NeighbouringRNCIntelligentMultiCarrierTrafficAllocation N.A. depending on customer strategy for imcta; see doc UMT/IRC/INF/032536 1
isServicePriorityManagementEnable RadioAccessService unset TRUE 1
mobilityServiceForHsxpaEnable FddIntelligentMultiCarrierTrafficAllocation TRUE depending on customer strategy for imcta; see doc UMT/IRC/INF/032536 1
mobilityServiceForNonHsxpaEnable FddIntelligentMultiCarrierTrafficAllocation TRUE depending on customer strategy for imcta; see doc UMT/IRC/INF/032536 1
mode FddIntelligentMultiCarrierTrafficAllocation AlarmAndCac (vide) 1
NeighbouringRNCIntelligentMultiCarrierTrafficAllocation AlarmAndCac (vide) 1
priority Service PNA P1/P2/PNA - depending on customer strategy for imcta; see doc UMT/IRC/INF/032536 1
serviceHoRanapIeEnable Imcta TRUE (vide) 1
servicePriorityGeneralTableConfClassId FddIntelligentMultiCarrierTrafficAllocation N.A. depending on imcta class defined by operator 1
29417 RNC Connection to multiple Core Network nodes (Iu-Flex) None None None (vide) 1
29770 OC3 MS3 support on RNC None None None (vide) 1
29798 Compressed Mode in MAC-hs isGsmCModeActivationAllowed DlUserService FALSE/TRUE depending on service, see templates 1
isInterFreqCModeActivationAllowed DlUserService FALSE/TRUE except for SRB, for which setting is FALSE 1
isInterFreqMeasActivationAllowed RadioAccessService TRUE (vide) 1
isPatternAllowed CModePatternSeqInfo FALSE (vide) 1
29800 Dynamic DL Code Tree Mgt For HSDPA isCellHsPdschDynamicManagementActive HsdpaCellClass FALSE (vide) 1
isHsPdschDynamicManagementAllowed RadioAccessService unset FALSE 1
29801 48-user HSDPA iCEM BBU Capacity None None None (vide) 1
29802 Inter-freq Inter-system HSDPA HHO isHsdpaHhoWithMeasAllowed RadioAccessService TRUE (vide) 1
29807 MAC-hs Scheduler Improvements hsdpaSchedulerAlgorithm HsdpaConf proportionalFair (vide) 1
hsdpaSchedulerAlgorithmXcem HsdpaConf cRMax (vide) 1
hsdpaSchedulerWeightingFactor HsdpaConf 5 (vide) 1
hsdpaSchedulerWeightingFactorXcem HsdpaConf 8 (vide) 1
29809 UE Cat8 None None None (vide) 1
29813 UE Cat 9 & 10 Support None None None (vide) 1
29816 Cell reselection control in a Hierarchical Cell Structure (HCS) isHcsUsed FDDCell unset FALSE 1
29817 HSDPA Over Iur isHsdpaAllowed NeighbouringRNC FALSE TRUE 1
RemoteFDDCell FALSE TRUE 1
isHsdpaOverIurAsDrncAllowed RadioAccessService unset TRUE 1
isHsdpaOverIurAsSrncAllowed RadioAccessService unset TRUE 1
29819 HSDPA Performance Enhancement harqType HsdpaConf DRWithPowerAdaptation (vide) 1
hsdpaCqiBlerAdjustmentAlgo HsdpaConf dynamicOuterLoopAlgo (vide) 1
rxDemodulation BTSEquipment 0 (vide) 1
ueCategory1 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory10 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory11 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory12 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory2 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory3 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory4 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory5 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory6 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory7 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory8 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
ueCategory9 HsdpaUeCategoryTransportBlockOptimisation TRUE (vide) 1
29840 Commercial HSUPA Introduction edchActivation FDDCell FALSE depending on E-DCH activation in each cell 1
edchResourceActivation BTSCell unset depending on E-DCH activation in each cell 1
isEdchAllowed RadioAccessService unset TRUE - if E-DCH allowed 1
ttiType EdchConf 10ms (vide) 1
29932 6 sectors (3+3) NodeB None None None (vide) 1
30069 UA05.0 counter evolutions None None None (vide) 1
30070 UA05 Parameter evolutions None None None (vide) 1
30071 NodeB security evolution None None None (vide) 1
30072 RNC security evolution None None None (vide) 1
30172 iRM Scheduling : Iur support isIrmSchedulingOverIurAllowed RadioAccessService FALSE (vide) 1
30223 UA05 call trace enhancements None None None (vide) 1
30264 TIL enhancement None None None (vide) 1
30410 RNC Dimensioning boundaries None None None (vide) 1
30598 CS Speech UL:12.2 DL:12.2+PS I/B up to 384 None None None (vide) 1
30599 CS Conversational UL:64 DL:64+PS I/B up to 384 None None None (vide) 1
30675 Dynamic SIB Scheduling None None None (vide) 1
30730 3GPP baseline & additional CRs None None None (vide) 1
30741 Multi-RAB Handling on HSUPA None None None (vide) 1
30766 (CS Speech UL:12.2 DL:12.2)+PS I/B+PS I/B up to 384 None None None (vide) 1
30804 Multiple S-CCPCH channel support sccpchOffset SCCPCH 23040 (vide) 1
31783 RRH 2100MHz None None None (vide) 1
31805 Automatic Cell Barring on Service Outage None None None (vide) 1
32025 900MHz NodeB None None None (vide) 1
32309 2 Carriers HSDPA Support None None None (vide) 1
32520 HSDPA and E-DCH service Indicator edchServiceIndicatorMethod FDDCell Off depending on E-DCH activation in each cell 1
hsdpaServiceIndicatorMethod FDDCell Off depending on HSDPA activation in each cell 1
isHsxpaServiceIndicatorEnabled RadioAccessService TRUE (vide) 1
32602 HSPA to DCH FallBack edchToDchFallbackPermission RadioAccessService AnyCase (vide) 1
edchToDchFallbackSteps RadioAccessService Multistep (vide) 1
32687 AMR mode change during the call - evolution isAmrRateControlOnDlPowerLoadAllowed DlUserService FALSE/TRUE depending on service, see templates 1
External-Document Page 71 Alcatel-Lucent
RadioAccessService TRUE (vide) 1
isAmrRateControlOnIubDsLoadAllowed DlUserService FALSE/TRUE depending on service, see templates 1
UMT/IRC/DD/025012 Activation_Flags_Pivot v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
UA5.0 32687 AMR mode change during the call - evolution isAmrRateControlOnIubDsLoadAllowed RadioAccessService TRUE (vide) 1
isAmrRateControlOnUlCellLoadAllowed DlUserService FALSE/TRUE depending on service, see templates 1
RadioAccessService TRUE (vide) 1
33017 Mobility Handling in 3GPP R7 frequency Bands for 900MHz None None None (vide) 1
33018 D-BBU resource pooling between frequencies isAdaptiveRlcStatusFilterEnabled DlRbSetConf FALSE/TRUE depending on service, see templates 1
None None None (vide) 1
33111 RNC support for dual band 900/2100 None None None (vide) 1
33651 UMTS 900MHz antenna sharing None None None (vide) 1
33672 HSUPA on Optical & RF Remote Units None None None (vide) 1
80062 Multi-Rab Handling on HSDPA isMultiRabOnHsdpaAllowed RadioAccessService unset TRUE 1
UA5.1 20602 3 Carrier Node B configuration (STSR3) None None None (vide) 1
27350 xCEM None None None (vide) 1
27803 Wideband AMR - UTRAN isAmrWbAllowed RadioAccessService FALSE (vide) 1
isCsRabModificationForSpeechAllowed RadioAccessService TRUE (vide) 1
32021 UMTS rBTS 6100 None None None (vide) 1
32650 1700/2100 Spectrum Support None None None (vide) 1
33033 UMTS Micro NodeB release3 None None None (vide) 1
33118 nE1 + 1 IMA group on iCCM None None None (vide) 1
33340 UMTS Pico NodeB (ATM) - UA05 feature set None None None (vide) 1
33366 Next generation PSFP Introduction None None None (vide) 1
33480 Compressed Mode in MAC-e scheduler isGsmCModeActivationAllowed DlUserService FALSE/TRUE depending on service, see templates 1
isInterFreqCModeActivationAllowed DlUserService FALSE/TRUE except for SRB, for which setting is FALSE 1
33589 Channel estimation improvements None None None (vide) 1
33712 UMTS dBTS 2U xModules rack None None None (vide) 1
33863 Initialisation of AMR DL Rate from OMC isMaxDlAmrRateConfiguredAllowed RadioAccessService FALSE TRUE 1
34012 HSDPA over IuR b/w limitation isMacShHsdpaAllowed RadioAccessService TRUE (vide) 1
34027 RRH 40W 2100MHz None None None (vide) 1
34094 HSxPA support in multi-PCM configuration None None None (vide) 1
34153 RNC support for Dual Band - New frequencies None None None (vide) 1
34168 STSR2+1 NodeB configuration None None None (vide) 1
34191 RNAR support on RNC accessClassBarringActivation AccessRegulationProfile FALSE (vide) 1
34259 RRH 40W 850MHz (+24V) None None None (vide) 1
34340 656 bits PDU Size Management for big HSDPA data rate eligibleUeCategoryForHighPerformance HsdpaRncConf 00000000000000000000000000000(vide) 1
isDynamicMacdPduSizeManagementAllowed RadioAccessService unset TRUE 1
isHighPerformancePduSizeReconfAllowed HsdpaRncConf 00000000000000000000000000000(vide) 1
minimumUserMbrForHighPerformance HsdpaRncConf 60000 (vide) 1
34472 Iub backhauling evolutions via Cell Site Aggregator None None None (vide) 1
34699 UTRAN Sharing support for 4 operators None None None (vide) 1
36185 Alcatel-Lucent 9341 RRH 40W AWS None None None (vide) 1
75072 MCPA60W-2 None None None (vide) 1
75074 xTRM-2 None None None (vide) 1
UA6.0 16746 Capacity licensing edchNumberUserCapacityLicensing Capacity unset depending on capacity licenses 1
edchThroughputCapacityLicensing Capacity unset depending on capacity licenses 1
hsdpaNumberUserCapacityLicensing Capacity unset depending on capacity licenses 1
hsdpaThroughputCapacityLicensing Capacity unset depending on capacity licenses 1
paPowerCapacityLicensing Capacity unset depending on capacity licenses 1
r99NumberCECapacityLicensing Capacity unset depending on capacity licenses 1
rrhCarrierCapacityLicensing Capacity unset depending on capacity licenses 1
rrhPowerCapacityLicensing Capacity unset depending on capacity licenses 1
xtrmCarrierCapacityLicensing Capacity unset depending on capacity licenses 1
20601 STSR2+2 and STSR2+1 NodeB configurations None None None (vide) 1
23479 Advanced QoS Transport Framework None None None (vide) 1
24089 Enhanced Cell Coverage positioning with RTT cellIdRttActivationAllowed LocationServices unset FALSE 1
isCellIdRttAllowed FDDCell FALSE (vide) 1
NeighbouringRNC FALSE (vide) 1
24831 iBTS Inventory enhancement None None None (vide) 1
25027 Advanced Location Services cellIdRttParamsEnabled CommercialLocationServices FALSE (vide) 1
EmergencyLocationService FALSE (vide) 1
commercialLocationServiceActivationAllowed LocationServices unset FALSE 1
ueBasedAgpsParamsEnabled CommercialLocationServices unset FALSE 1
EmergencyLocationService unset FALSE 1
27034 Update of RRM parameters during SRLR deltaCfn ServiceInit 130 (vide) 1
is13dot6DcchDecouplingEnabled RadioAccessService TRUE (vide) 1
isDynamicDeltaCfnCalculation RadioAccessService TRUE (vide) 1
isSrb13dot6DefaultRbConfigEnabled RadioAccessService FALSE (vide) 1
isSrlrDeltaCfnOptimized ServiceInit TRUE (vide) 1
isUpdateRrmParametersAllowed RadioAccessService TRUE (vide) 1
srlrDelayMargin ServiceInit 700 400 1
28035 Compressed Mode using Higher Layer Scheduling (HLS) isHlsCmAllowedOnDrnc NeighbouringRNC FALSE (vide) 1
isHlsCmMethodPreferred DlUserService FALSE/TRUE depending on service, see templates 1
UlUserService FALSE/TRUE depending on service, see templates 1
isHlsCModeAllowed RadioAccessService TRUE (vide) 1
28419 Dual-band NodeB None None None (vide) 1
28436 Extension of DRNS Capabilities isEnhancedIurInterworkingAllowedOnDrnc RadioAccessService FALSE (vide) 1
isEnhancedIurRabConfigEnabled RadioAccessService unset FALSE 1
isEnhancedMeasurementSupportAllowedOnDrnc RadioAccessService FALSE (vide) 1
isExtensionOfDrncCapabilitiesEnabled RadioAccessService FALSE (vide) 1
isFlexentDrncInterworkingRestrictionEnabled NeighbouringRNC FALSE (vide) 1
isFlexentInterworkingUtranRestrictionEnabled RadioAccessService FALSE (vide) 1
28584 NodeB soft shutdown softShutdownAllowed NodeB unset FALSE 1
29416 Switching between Video and Speech serviceChangeRncInitiated RadioAccessService FALSE (vide) 1
29799 MAC-d PDU Size Mgt For HSDPA isDynamicMacdPduSizeManagementAllowed RadioAccessService unset TRUE 1
isHighPerformancePduSizeReconfAllowed HsdpaRncConf 00000000000000000000000000000(vide) 1
isHsdpaCellHighPerformance FDDCell TRUE (vide) 1
29804 GBR on HSDPA isDlPowerSelfTuningForPsIbOnHsdpaEnabled FDDCell FALSE TRUE - depending on customer strategy for fair sharing at CAC 1
isGbrOnHsdpaAllowed RadioAccessService FALSE TRUE 1
29808 Multi-carrier PA Power Pooling isBtsPowerSelfTuningActivated PowerConfClass FALSE TRUE - depending on strategy - see volume 7 HPUG 1
isPowerPoolingActivated FDDCell FALSE TRUE - depending on strategy - see volume 7 HPUG 1
paPoolingActivation BTSEquipment unset TRUE - depending on strategy - see volume 7 HPUG 1
29869 9370 RNC Increased Dimensioning None None None (vide) 1
29931 Ultra extended cell mode None None None (vide) 1
30744 HSUPA Over Iur isEdchAllowed NeighbouringRNC unset TRUE 1
isEdchOverIurDrncAllowed RadioAccessService unset TRUE 1
isEdchOverIurSrncAllowed RadioAccessService unset TRUE 1
31039 PS Core Network requested RAB modification isPsRabModificationAllowed RadioAccessService FALSE (vide) 1
31830 xCCM supports 2 IMA groups None None None (vide) 1
32076 E-DCH Macro Diversity Support maxNumberOfRlEdch EdchRncConf 1 (vide) 1
32525 UA06 UTRAN call trace developments None None None (vide) 1
32601 iMCTA enhancement for WPS isWpsDirectedRetryAllowed Imcta FALSE (vide) 1
32697 xCCM in NodeB None None None (vide) 1
32898 UA06 Parameter Evolution None None None (vide) 1
33278 Node B Security UA06 Development radiusActivationMode BTSEquipment notActivated (vide) 1
33308 Multi-mode BBUs None None None (vide) 1
33320 New RAB and combinations for UA06 None None None (vide) 1
33322 Pre-emption process for DCH and HSDPA/HSUPA isCellPreemptionAllowed FDDCell TRUE (vide) 1
isCellPreemptionCodePowerCacFailureAllowed FDDCell TRUE (vide) 1
isCellPreemptionIubCacFailureAllowed FDDCell FALSE (vide) 1
isCellPreemptionNbapCacFailureAllowed FDDCell TRUE (vide) 1
isPreemptionAllowed PreemptionAllowedInfo FALSE depending on customer strategy 1
isPreemptionAllowedForEdch PreemptionAllowedInfo FALSE depending on customer strategy 1
isPreemptionAllowedForHsdpa PreemptionAllowedInfo FALSE depending on customer strategy 1
preemptionCapabilityForAlwaysOnToDch PreemptionCapabilityProcedureInfo ShallNotTriggerPreemption (vide) 1
preemptionCapabilityForAlwaysOnToEdch PreemptionCapabilityProcedureInfo ShallNotTriggerPreemption (vide) 1
preemptionCapabilityForAlwaysOnToHsDsch PreemptionCapabilityProcedureInfo ShallNotTriggerPreemption (vide) 1
preemptionCapabilityForMobility PreemptionCapabilityProcedureInfo ShallNotTriggerPreemption (vide) 1
preemptionCapabilityForRrcEstabCauseOtherThanEmergencyCall PreemptionCapabilityProcedureInfo ShallNotTriggerPreemption (vide) 1
33326 Unified RRM Step 2 : Cell Load information exchange between 2G and 3G is2GCellLoadInformationManagementAllowed RadioAccessService FALSE FALSE 1
isCellLoadInformationSendingAllowed RadioAccessService FALSE FALSE 1
33327 MAC-e Scheduler Evolutions edchInactivityTimerXcem EdchConf 480 (vide) 1
edchSpiRelativeWeight EdchConf (100,100,100,100,100,100,100,100,(vide) 1
isNbapCommonMeasRsepsAllowed NodeB unset TRUE 1
33332 Iub congestion control for e-DCH isEdchBandwidthLimitationAllowed BTSEquipment unset depending on Iub configuration 1
33334 Hybrid IP/Ethernet & ATM/E1 Iub support on xCCM None None None (vide) 1
33336 HSUPA Category 4 to 6 Support isEdchTti2msAllowed RadioAccessService FALSE TRUE 1
isEdchTti2msAllowed EdchCellClass FALSE TRUE 1
External-Document Page 72 Alcatel-Lucent
33341 UMTS Micro Node B None None None (vide) 1
33342 UMTS Pico NodeB (ATM) - UA06 feature set None None None (vide) 1
UMT/IRC/DD/025012 Activation_Flags_Pivot v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
UA6.0 34668 RRC Connection Request Counter Excluding UE Repetitions None None None (vide) 1
76934 ATT KPI parity - HSDPA Cell Change Workaround kpiParityHsdpaCellChangeRejectWorkaroundActivation BTSEquipment FALSE (vide) 1
78609 ATT KPI parity - CAC failures during AO upsizing and CFN activation time calcuisCacFailureRollbackEnabled RadioAccessService FALSE (vide) 1
84900 Traffic Segmentation between HSPA Layers by RRC Redirection layerPreferredForR99 FDDCell FALSE see doc UMT/IRC/INF/032536 1
UA7.0 21092 Cell Broadcast service None None None (vide) 1
28356 Inter-Band 900/2100 Mobility Support None None None (vide) 1
34277 Real Time Call Trace realTimeReporting AccessSession FALSE (vide) 1
34386 64-QAM for HSDPA is64QamAllowedForUeCategory HsdpaRncConf 000000000000000000000000000000000000000000000000000000000000000000000110011110011000000000000 1
isDl64QamAllowed FDDCell FALSE TRUE 1
RemoteFDDCell FALSE TRUE 1
isDl64QamOnRncAllowed RadioAccessService unset depending on customer strategy/licensing 1
isIncoming3Gto3GWithIur64QamAllowed NeighbouringRNC TRUE TRUE 1
isIurDl64QamAllowed NeighbouringRNC TRUE TRUE 1
34388 L2 improvements support (RLC & MAC-hs/e S/W for improved RLC) dchSlowStartActivation RbCongestionControl TRUE (vide) 1
hsdschSlowStartActivation RbCongestionControl TRUE (vide) 1
isMacEhsAllowed FDDCell TRUE TRUE 1
NeighbouringRNC TRUE TRUE 1
RadioAccessService TRUE depending on customer strategy/licensing 1
isMacEhsAllowedForUeCategory HsdpaRncConf 000000000000000000000000 (vide) 1
isRlcFlexibleSizeForPsStrAllowed HsdpaRncConf TRUE (vide) 1
34395 UA07 Product Performance Targets isKpiMonitoringRequired AccessSession FALSE (vide) 1
34403 AMR Code Set 2 with TrFO enableIuRateControlRegulation CsCoreNetworkAccess FALSE (vide) 1
isAmrRbSelectionV2AtAdmissionAllowed RadioAccessService unset FALSE 1
isAmrRbSelectionV2AtAdmissionAllowedInCell FDDCell TRUE (vide) 1
34437 Enhanced iMCTA isImctaFddLayerLoadPreCheckAllowed RadioAccessService TRUE TRUE 1
isImctaLoadBasedAllowed RadioAccessService FALSE TRUE 1
imctaLoadBasedTargetCellColorThreshold UmtsNeighbouringImcta RED YELLOW 1
34454 UTRAN licensing enhancements additionalRadioPerSectorCapacityLicensing Capacity infinite (vide) 1
rrhTrduThirdCarrierCapacityLicensing Capacity 0 (vide) 1
34461 New RAB and Combinations for UA7 enabledForRABMatching DlRbSetConf FALSE/TRUE depending on service, see templates 1
UlRbSetConf FALSE/TRUE (vide) 1
UlUserService FALSE/TRUE TRUE for PS_Edch_SRB_Edch 1
34667 Parameter Class Evolution in UA07 None None None (vide) 1
34694 Distribution Counters For CPICH Rscp and EcNo isCpichQualityReportingEnabled RadioAccessService FALSE (vide) 1
34695 Distribution Counters for UL/DL BLER isBlerDistributionReportingEnabled RadioAccessService FALSE (vide) 1
75069 iMCTA improvement isRrcRedirectionInterFreq RadioAccessService TRUE (vide) 1
rrcRedirectionType InterFreqHhoFddCell None depending on customer strategy; see doc UMT/IRC/INF/032536 1
77736 Non-GPS LBS (SKT) pCellActivationAllowed LocationServices FALSE (vide) 1
pCellParamsEnabled CommercialLocationServices FALSE (vide) 1
EmergencyLocationService FALSE (vide) 1
80677 SRNS relocation improvement(SRB#2 Act time change) isRelocDrncSrb2Enabled RadioAccessService FALSE (vide) 1
UA7.1 27615 GPS Assistance data developments isUeBasedUeAuditAllowed CommercialLocationServices unset FALSE 1
EmergencyLocationService unset FALSE 1
27649 Native IP Iub support isIubOnNativeIpAllowed NodeB unset TRUE is IP over Iub is deployed, FALSE otherwise 1
nodebCapability NodeB unset TRUE is IP over Iub is deployed, FALSE otherwise 1
28528 Multi-Operator Core Network (MOCN) isMocnActivated RNC unset FALSE 1
31868 MBMS Broadcast isMbmsBroadcastModeActivated FDDCell FALSE (vide) 1
isMbmsBroadcastModeAllowed RadioAccessService FALSE (vide) 1
isTransportBearerSharingForMbmsAllowed NodeB FALSE (vide) 1
mbmsActivation BTSEquipment FALSE (vide) 1
33331 Alarm HHO based on UE TX Power IsAlarmHHOUeTxPwrAllowed RadioAccessService TRUE For details on thresholds see templates and doc UMT/IRC/INF/032536 1
33612 UL Load estimation for E-DCH with multiple CEMs referenceRtwp FDDCell -106,1 not good flag see rather edchloadestimationalgorithm 1
34018 Multiple PS I/B on HSUPA and combination with CSD on HSDPA isMultiRabOneEdchAllowed RadioAccessService unset TRUE 1
34200 Support of Optical Repeater or RRH over 20Km distance None None None (vide) 1
34224 IF / IRAT Measurements evolution is3GHandoverPreferred FDDCell TRUE (vide) 1
NeighbouringRNC TRUE (vide) 1
isSimCMAllowed DlUserService FALSE/TRUE depending on service & strategy, see templates and doc UMT/IRC/INF/032536 1
UlUserService FALSE/TRUE depending on service & strategy, see templates and doc UMT/IRC/INF/032536 1
sib11OrDchUsage GsmNeighbouringCell unset depending on neighbour type 1
34246 Power Control Enhancements minSirTargetEdch2ms UlUsPowerConfTti2ms 3 (vide) 1
34378 Baseline for VoIP isVoipOverHspaAllowed FDDCell notAllowed (vide) 1
NeighbouringRNC notAllowed (vide) 1
RadioAccessService FALSE (vide) 1
RemoteFDDCell notAllowed (vide) 1
34396 Automatic Carrier Switchoff isAutomaticSwitchOff FDDCell FALSE (vide) 1
paSwitchOffActivationOnAcFailure BTSEquipment FALSE (vide) 1
34406 Enhancement of UTRAN positionning for 'Low Delay' location requests isAgpsAllowedForLowDelayRequests CommercialLocationServices FALSE (vide) 1
EmergencyLocationService FALSE (vide) 1
34442 SMS Cell Broadcast None None None (vide) 1
34453 Gigabit Ethernet MDA SW introduction gbEthernetSupportEnabled BTSEquipment FALSE (vide) 1
34455 NodeB synchronisation for all IP gpsSyncSourceNumber BTSEquipment unset (vide) 1
34480 3G/2G RRC Redirection based on Cell Load is3G2GRedirectOnCellLoadAllowed FDDCell FALSE (vide) 1
is3G2GRedirectOnCellLoadAllowedForEmergency RadioAccessService FALSE (vide) 1
is3G2GRedirectOnCellLoadAllowedForR99AndR5 FDDCell FALSE (vide) 1
isGsmTargetInfoListIeAllowed ServiceInit TRUE FALSE 1
34633 xCEM/UCUIII aggregate MAC-e throughput increase per board edchMaxThroughputXcem HsXpaResource automatic (vide) 1
34653 PS CN Requested RAB Modification isPsRabModificationFullFeatureAllowed RadioAccessService FALSE (vide) 1
34697 DRNC Counters at Cell Level isDrncCounterAtCellLevelAllowed RadioAccessService unset TRUE 1
isDrncCounterAtCellLevelForNeighbRncAllowed NeighbouringRNC TRUE TRUE 1
75069 iMCTA improvement isDisableRrcConnSetupRepeatOfImcra RadioAccessService FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
75784 Ethernet QoS handling in UTRAN pBitMarkingActivation IpRan FALSE (vide) 1
75998 Radio measurement frequency increase : TX power isDchPowerMarginAdaptive HsdpaConf FALSE (vide) 1
80509 Support on OneBTS of 30744 HSUPA over Iur isEdchIurRestrictionEnabled RadioAccessService FALSE TRUE in case IOT issue on Iur 1
119403 RRC Connection Reject for SKT data Femto isRrcConnRejRedirectAllowed FDDCell FALSE (vide) 1
98441 VT call block at Cell level isVtCallBlockOnCellAllowed FDDCell FALSE FALSE 1
RemoteFDDCell FALSE FALSE 1
isVtCallBlockOnRncAllowed NeighbouringRNC FALSE FALSE 1
RadioAccessService FALSE FALSE 1
UA7.1.3 24186 Common Channels Defense in case of CEM loss cchRelocationActivation BTSEquipment TRUE (vide) 1
30742 MBR handling in the HSUPA Scheduler isStreamingOnEdchAllowed RadioAccessService TRUE FALSE 1
33612 UL Load estimation for E-DCH with multiple CEMs edchLoadEstimationAlgorithm RfCarrier 0 (vide) 1
locFrequencyReuseFactor BTSCell 0 (vide) 1
34391 Multiple xCEM per carrier isHsxpaGroupingAllowed BTSEquipment unset FALSE 1
34393 Advanced Receiver for High UL Data Rate gRakeActivation BTSEquipment TRUE (vide) 1
34682 IMA AlCAP defense for iBTS holdingPriority VCC N.A. (vide) 1
imaDefenseMethod BTSEquipment None (vide) 1
75071 Switching between Video and Speech (SCUDIF) - Network initiation isScudifAllowedForDrns NeighbouringRNC FALSE (vide) 1
isVtServiceSupportedOn2G RadioAccessService FALSE (vide) 1
79036 Improvement of Paging Channel(PCH) scheduling tPageVal RadioAccessService 40960 (vide) 1
81204 Dual Carrier HSDPA operation dualCellActivation HsdpaConf FALSE TRUE 1
hsdpaPlusPreferredMode FDDCell None dualCellPreferred 1
isDualCellAllowedForUeCategory HsdpaRncConf 00000000000000000000000000000(vide) 1
isHsdpaDualCellActivated FDDCell FALSE TRUE 1
isHsdpaDualCellAllowed RadioAccessService unset TRUE 1
81213 Load balancing between HSPA Carriers isHspaCellLoadAllowedForImcra RadioAccessService FALSE TRUE 1
isHsxpaR99ResourcesSharingOnCellAllowed FDDCell unset TRUE 1
isPinitRrcRedirectionAllowed RadioAccessService FALSE TRUE 1
81432 SCUDIF with 3subflow RAB and the first VTcall with 1subflow csdDecisionUsingRanapIeFor3Subflows RadioAccessService None (vide) 1
serviceChangeUserInitiated RadioAccessService FALSE (vide) 1
81436 LTE to UMTS cell reselection isSib19Allowed RadioAccessService FALSE TRUE 1
sib19Enable FDDCell FALSE TRUE 1
89413 none rrcMeasurementPriorityManagement RadioAccessService disabled (vide) 1
93278 T3 backhaul for 9316 MS Node B and 9326 d2U pcm3SupportEnabled BTSEquipment FALSE (vide) 1
94698 Enhanced SIR estimation for E-DCH ulSirEstimationForDPCCHProtection BTSEquipment FALSE (vide) 1
96374 Parameter and Alarm Mapping Gaps rxDiversityImbalancedThreshold AntennaAccess N.A. (vide) 1
rxVSWRThreshold BTSEquipment N.A. (vide) 1
96461 Support on d2U 9326 and MSNodeB for ATT of 34170 Multiple PDP Context ParmultiplePdpContextParityRequirementsActivation BTSEquipment FALSE (vide) 1
97424 Parity for UA06 and UA07 ATT features kpiParityActivation BTSEquipment FALSE (vide) 1
98850 Support on d2U 9326 and MSNodeB for ATT of 28436 Extension of Iur capabitiliextendedIurCapabilitiesActivation BTSEquipment FALSE (vide) 1
104489 LTE to UMTS HO FromEutraRelocationCiphering PsCoreNetworkAccess FALSE (vide) 1
isEutraToUtraHhoAllowed RadioAccessService FALSE (vide) 1
106346 Availability for GM of 34236 QoS Negotiation over Iu enableRabNegotiation RadioAccessService FALSE TRUE 1
108388 UA07 enhanced URA_PCH (eURA_PCH) Paging isAlwaysOnAllowed DlUserService FALSE depending on service, see templates 1
UlUserService FALSE TRUE for PS_Edch_SRB_Edch 1
isDualPagingAllowed RadioAccessService FALSE (vide) 1
External-Document Page 74 Alcatel-Lucent
pchRrcStates RadioAccessService None (vide) 1
113511 HSDPA aggregate throughput increase to 40 Mbps per baseband board hsdpaMaxThroughputXcem HsXpaResource automatic For NodeB with xCCM/eCCM configured with MDA-GE:
hsdpaMaxThroughputXcem = automatic or 39600
UA7.1.3 113511 HSDPA aggregate throughput increase to 40 Mbps per baseband board hsdpaThroughputCapacityLicensing Capacity unset depending on capacity licenses 1
125177 Paging repetition per domain pagingRepetitionDomain RadioAccessService AllPagingCauses (vide) 1
UA08.1 29810 Fractional DPCH - SRB over HSPA isSrbOverHspaEnabled FDDCell unset FALSE 1
NeighbouringRNC unset FALSE 1
RadioAccessService unset FALSE 1
RemoteFDDCell unset FALSE 1
isSrbOverHspaEnabledForCs RadioAccessService FALSE FALSE 1
isSrbOverHspaEnabledForPsConversational RadioAccessService FALSE FALSE 1
isSrbOverHspaEnabledForPsIb RadioAccessService FALSE FALSE 1
isSrbOverHspaEnabledForPsStreaming RadioAccessService FALSE FALSE 1
isSrbOverHspaEnabledForSignaling RadioAccessService FALSE FALSE 1
30742 MBR handling in the HSUPA Scheduler isEdchMbrInfoToNodebAllowed RadioAccessService FALSE TRUE 1
33565 UA06 Always-On developments isPs00EnabledWhenUraPchOff AlwaysOnConf FALSE FALSE 1
75068 CBS improvement on dynamic scheduling isEnhancedCbsSchedulingAllowed CbsResource FALSE FALSE (gating CR) 1
81436 Mobility between UMTS and LTE - Cell Reselection isSib19Allowed RadioAccessService FALSE TRUE 1
sib19Enable FDDCell FALSE TRUE 1
94698 Enhanced SIR estimation for E-DCH isEnhancedSirActivated NodeB FALSE (vide) 1
104489 LTE to UMTS HO FromEutraRelocationCiphering PsCoreNetworkAccess cipheringDisabledIgnore cipheringDisabledIgnore 1
isEutraToUtraHhoAllowed RadioAccessService FALSE FALSE 1
106346 Availability for GM of 34236 QoS Negotiation over Iu enableMbrNegotiation RadioAccessService FALSE TRUE (negotiation is not applied on the GBR values) 1
111135 Automatic IMT log collection autoLogCollectionActivation BTSEquipment FALSE TRUE if log collection is required 1
89858 iMCTA Enhanced with HSPA Load – Blind HHO – Direct HHO on AO Upsize carrierPreSelectAlgorithm FddIntelligentMultiCarrierTrafficAllocation disabled depending on customer strategy; see doc UMT/IRC/INF/032536 1
NeighbouringRNCIntelligentMultiCarrierTrafficAllocation disabled depending on customer strategy; see doc UMT/IRC/INF/032536 1
imctaFallbackHoFailure Imcta disabled depending on customer strategy; see doc UMT/IRC/INF/032536 1
isImctaBlindHo RadioAccessService FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
isImctaOnAoUpsize FddIntelligentMultiCarrierTrafficAllocation FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
RadioAccessService FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
isImctaUseHspaLoad RadioAccessService FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
isRedirectionToLte RadioAccessService FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
measRepDiscardTimerAlarmFdd Imcta 0 depending on customer strategy; see doc UMT/IRC/INF/032536 1
measRepDiscardTimerAlarmMultiRat Imcta 0 depending on customer strategy; see doc UMT/IRC/INF/032536 1
measRepDiscardTimerCacFdd Imcta 0 depending on customer strategy; see doc UMT/IRC/INF/032536 1
measRepDiscardTimerCacMultiRat Imcta 0 depending on customer strategy; see doc UMT/IRC/INF/032536 1
measRepDiscardTimerServiceFdd Imcta 0 depending on customer strategy; see doc UMT/IRC/INF/032536 1
measRepDiscardTimerServiceMultiRat Imcta 0 depending on customer strategy; see doc UMT/IRC/INF/032536 1
79362 Flexible Operator Configurable Split IP Iub isFlexibleOperatorConfigurableSplitAllowed IpRan FALSE TRUE (If customer want to separate traffic ) 1
isTrafficShapingOnPortActivated IpRan FALSE FALSE 1
117821 Support of 2.2 MHz spacing between 2G and 3G carriers on RRH60 and xTRM, FilterBandwidthDownlink BTSCell 4600 4600 (deactivated) 1
FilterBandwidthUplink BTSCell 4600 4200 for U900 Nodes B on specific cases 1
114908 RETA for RRH capacity licensing integratedAisgDevicesManagement BTSEquipment unset FALSE 1
116647 3G only MC-TRX 900MHz w/o dependency to 2G is3GControlModeAllowed BTSEquipment FALSE FALSE 1
108389 Direct PCH to DCH Transition supportEstabCauseAndTrafficVolInd RadioAccessService FALSE TRUE if URA_PCH activated 1
isAlwaysOnAllowedForSigIndOnRab AlwaysOnConf FALSE FALSE 1
105590 2G/3G multi-mode operation on MC-TRX 900MHz isBtsDualTechnologySecondaryController MCTRX FALSE FALSE 1
112880 3G & 2G support of MC-RRH 900Mhz multi-standard (1PA 2G & 1 PA 3G) isBtsDualTechnologySecondaryController RemoteRadioHead FALSE FALSE 1
34582 UE positionning information to CTg and CTb isUeBasedUeAuditAllowed CallTracePeriodicLocationServices TRUE TRUE if applicable 1
unset TRUE if applicable 1
isCellIdRttEnabled UePositionMeasConfigForCallTrace unset TRUE if applicable 1
isUeBasedAgpsEnabled UePositionMeasConfigForCallTrace TRUE TRUE if applicable 1
unset TRUE if applicable 1
isUePositionAcquisitionRequired UePositionMeasConfigForCallTrace unset TRUE if applicable 1
117014 RTT support over IuR isCellIdRttSupportedOverIurAllowed LocationServices unset TRUE 1
isCellIdRttSupportedOverIurEnabled CommercialLocationServices FALSE TRUE 1
EmergencyLocationService FALSE TRUE 1
CallTracePeriodicLocationServices FALSE TRUE 1
106905 Node B Soft Shutdown Evolution isEnhancedSoftShutdownAllowed RadioAccessService unset TRUE if operator is interested in this feature 1
softShutdownMode NodeB None enhancedmode 1
113792 Ethernet backplane migration isEthernetBackplaneAllowed BTSEquipment FALSE TRUE 1
97425 Fast Dormancy for Smartphone battery saving isExtendedFastDormancyAllowed RadioAccessService FALSE FALSE 1
isFastDormancyAllowed RadioAccessService FALSE TRUE if URA_PCH activated 1
89857 iMCRA - traffic balancing at RRC connection establishment with Programmable isImcraActivated FDDCell FALSE TRUE - Recommended to replace previous iMCRA functionalities 1
RadioAccessService unset TRUE - Recommended to replace previous iMCRA functionalities 1
isEcNoCheckFor3GTwinCellAllowed FDDCell <Null> depending on customer strategy; see doc UMT/IRC/INF/032536 1
isEcNoCheckForLteTwinCellAllowed FDDCell FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
isPartialCellBarConsideredInMobility RadioAccessService FALSE depending on customer strategy; see doc UMT/IRC/INF/032536 1
83984 2*2 MIMO isMimoAllowed RadioAccessService unset FALSE 1
isMimoAllowedForUeCategory HsdpaRncConf 11111100000000000000 (vide) 1
mimoActivation FDDCell FALSE FALSE 1
dualPaUsage BTSCell None FALSE 1
isVamAllowed BTSEquipment FALSE FALSE 1
119418 Multi-Service RAB call drop reduction for Smartphone isMultiServiceRabManagementAllowed RadioAccessService FALSE FALSE 1
isReleasePsOnRncDetectedTrbRlcErrorAllowed RadioAccessService FALSE TRUE 1
isMultiRabPsPagingDiscardAllowed MultiServiceRabManagement FALSE FALSE 1
isMultiRabPsRabReleaseAllowed MultiServiceRabManagement FALSE FALSE 1
isMultiRabPsSetupRejAllowed MultiServiceRabManagement FALSE FALSE 1
108661 LTE to UMTS PS HO and cell reselection Enhancement isPartialRelocationFromLteAllowed RadioAccessService FALSE FALSE 1
108961 Optimized performance for QCHAT (Push To Talk) isQChatAllowed FDDCell FALSE FALSE 1
NeighbouringRNC FALSE FALSE 1
RadioAccessService unset FALSE 1
RemoteFDDCell FALSE FALSE 1
98451 HO parameters (HoConfClassId) configuration at cell granularity when UE underisRemoteCellConfIdsEnabled RadioAccessService TRUE Korean Only 1
115109 CS fallback enhancement from LTE to UMTS:enhanced Redirection isRimForUtraSiAllowed RadioAccessService FALSE TRUE - need to check compatibility with ran and core 1
isRimForUtraSiFromLteActivated FDDCell FALSE TRUE - need to check compatibility with ran and core 1
117731 AGPS optimization: Satellites prioritization isSatellitePrioritisationAllowed AGPSUeBasedLocationTechnology FALSE FALSE 1
119026 Soft Congestion isSoftCongestionAllowed RadioAccessService FALSE FALSE 1
softCongestionActivation BTSEquipment FALSE FALSE 1
119923 Always On timer for CS + PS multi-service RAB combination isUseTimerT2ForMultiRab AlwaysOnConf FALSE TRUE 1
118929 Support of VT call block over Iur isVtCallBlockAtMobilityOnCellAllowed FDDCell FALSE FALSE 1
RemoteFDDCell FALSE FALSE 1
108192 RNC Full UE Tracing Capability periodicIntraFreqMeasEnabled Mme FALSE TRUE if see other comment 1
protocolTraceInfoMsgEnabled Mme FALSE TRUE if see other comment 1
112779 Unique carrier licensing scheme for RRH and CPRI based RF modules additionalRadioPerSectorCapacityLicensing Capacity infinite depending on capacity licenses 1
radioCarrierCapacityLicensing Capacity infinite depending on capacity licenses 1
116687 Reference Time Forwarding for AGPS isSmlcAllowed RadioAccessService FALSE TRUE 1
referenceTimeFirstPosition AGPSUeBasedLocationTechnology FALSE TRUE 2
82602 E-DCH user and cell throughput increase useEnhancedUserActivityDetection FDDCell FALSE TRUE 1
useOptimizedEdchHarqRetransAtCellEdge FDDCell FALSE TRUE 1
useImprovedCacFor2msTtiUsers BTSEquipment FALSE TRUE 1
useAdaptiveHsDpcchPowerOffset FDDCell FALSE FALSE 1
118154 Dual Cell HSDPA Capacity Increase isMultiServiceForDualCellAllowed RadioAccessService FALSE FALSE 1
sMultiRabForDualCellHsdpaAllowed RadioAccessService FALSE TRUE 1
121085 UL Power saving with E-DCH OLPC isEdchFastSirTargetDecreaseAllowed RadioAccessService FALSE TRUE 1
125567 E-DCH enhanced NodeB CAC maxNbEdchCreditsForEcem BTSEquipment 128 128 1
maxNbEdchCreditsForXcem BTSEquipment 128 100 for xCem 1
125855 E-DCH call retainability improvements multiRabBadRadioSmartEdchResourceUsageActivation EdchRncConf FALSE TRUE 1
FDDCell FALSE TRUE 1
psRabBadRadioSmartEdchResourceUsageActivation EdchRncConf FALSE TRUE 1
FDDCell FALSE TRUE 1
maxColorForCac2ms EdchResource GREEN RED 1
maxNumActiveUsersForCac2ms EdchResource 0 0 (disable) 1
118155 eCEM HSPA aggregate throughput increase edchMaxThroughputEcem HsXpaResource automatic automatic 1
hsdpaMaxThroughputEcem HsXpaResource automatic automatic 1
134661 (vide) isReleaseAndRedirectionForCsFbAllowed FDDCell FALSE TRUE 1
LR13.3 103182 Ethernet OAM in the Node B eoamCFMActivation IpRan FALSE (vide) 1
eoamEFMActivation IpRan FALSE (vide) 1
89563 Enhanced L2 for Uplink isRlcFlexibleSizeForPsStrAllowed EdchRncConf FALSE (vide) 1
is7BitLiAlwaysUsedForUlRlcFlexibleMode EdchRncConf FALSE (vide) 1
isMaciisAllowed FDDCell FALSE (vide) 1
NeighbouringRNC FALSE (vide) 1
RadioAccessService FALSE (vide) 1
RemoteFDDCell FALSE (vide) 1
159246 Direct PCH to DCH Transition Enhancements isEnhancedDirectPchToDchAllowed RadioAccessService FALSE (vide) 1
123120 External Storage (WMS) of BTS Logs externalLogStorageActivation BTSEquipment FALSE (vide) 1
168710 Enhanced CELL_FACH for DL (3GPP Rel-7) isEnhancedCellFachForDlAllowed FDDCell FALSE (vide) 1
HsdpaConf FALSE (vide) 1
External-Document Page 75 Alcatel-Lucent
RadioAccessService FALSE (vide) 1
isMultiPsRabInCellFachAllowed RadioAccessService FALSE (vide) 1
UMT/IRC/DD/025012 Activation_Flags_Pivot v04.02 / EN - Preliminary
UTRAN Parameters Description - LR13.W 18/Apr/2013
LR13.1 111451 Inter-CEM Call migration (iBTS) dchMigrationActivation BTSEquipment disabled (vide) 1
113326 Node B Synchronisation Enhancements enableSynMonitoring BTSEquipment noSynMonitoring (vide) 1
97427 Local Node-B Iub E-DCH Congestion Control Enhancements enhancedEdchLocalCongestionControlActivation BTSEquipment FALSE (vide) 1
127550 Traffic Filtering in Cell Overload isAcbForRrcFilteringAllowed FDDCell FALSE (vide) 1
RadioAccessService FALSE (vide) 1
isAoUpsizeFilteringAllowed FDDCell FALSE (vide) 1
RadioAccessService FALSE (vide) 1
isRrcFilteringAllowed FDDCell FALSE (vide) 1
RadioAccessService FALSE (vide) 1
100791 BTS daisy chaining through the nodeB isBackhaulDaisyChainingActivated IpRan FALSE (vide) 1
134302 CBS enhancements for UE battery savings isBatterySavingAllowed CbsResource FALSE (vide) 1
isCbsSerialNumberHandlingActivated CbsResource FALSE (vide) 1
isDynamicScheduleMessageSizeActivated CbsResource FALSE (vide) 1
isPeriodicScheduleMessageActivated CbsResource FALSE (vide) 1
120416 Iu-PC interface enhancement isCellIdRttAllowed SasCentricModeService FALSE (vide) 1
isUeBasedAgpsAllowed SasCentricModeService FALSE (vide) 1
isGlonassAllowed SasCentricModeService FALSE (vide) 1
isSasCentricOperationPreferred LocationServices FALSE (vide) 1
isSasCentricPositioningEnabled UePositionMeasConfigForCallTrace FALSE (vide) 1
isUeAssistedAgpsAllowed SasCentricModeService FALSE (vide) 1
106719 RNC Call Trace Capacity Realignment isCoreSessionEmergencyCallTracingCapacityRealignmentEnabled CallTraceConfClass FALSE (vide) 1
isGeographicalSessionTracingCapacityRealignmentEnabled CallTraceConfClass FALSE (vide) 1
isNeighbouringSessionTracingCapacityRealignmentEnabled CallTraceConfClass FALSE (vide) 1
98448 Manual Overload control at NodeB granularity (Class barring enhancement) isDomainSpecificAccessClassBarringAllowed RadioAccessService FALSE (vide) 1
isExcludedFromAutomaticAcb FDDCell FALSE (vide) 1
isPartOfManualBarringRestrictionArea FDDCell FALSE (vide) 1
125407 Overload protection of NodeB digital part (controller and modem Step2) isEmergencyCallPriorityLevelForwarded RadioAccessService FALSE (vide) 1
120498 UA09 Call Trace Developments isFailureSessionAllowed CallTraceConfClass FALSE (vide) 1
isGeographicSessionDrncSyncEnabled CallTraceConfClass FALSE (vide) 1
isGeographicSessionPreventPartialTracesEnabled CallTraceConfClass FALSE (vide) 1
isUserPlaneTracingRequired GeographicalSession FALSE (vide) 1
120371 iMCTA Always On upsize enhancement isImctaBlindHoToLteOnAoUpsize RadioAccessService FALSE (vide) 1
isImctaDcOnAoUpsize RadioAccessService FALSE (vide) 1
155968 Cell load exchange for I-RAT mobility from LTE isRimForSonTransferAllowed RadioAccessService FALSE (vide) 1
isRimForSonTransferFromLteActivated FDDCell FALSE (vide) 1
isSonTransferOverloadFlag FDDCell FALSE (vide) 1
83659 HSPA VoIP from LTE VoIP to WCDMA CS Continuity (VCC) isSrvccEutraToUtraHhoAllowed FDDCell FALSE (vide) 1
RadioAccessService FALSE (vide) 1
isIncomingSrvccNotAllowed RadioAccessService FALSE (vide) 1
159393 Configurable VSWR Alarm Threshold isVSWRThresholdConfigurable BTSEquipment FALSE (vide) 1
126055 UL radio overload handling enhancements harqProcessReduction BTSEquipment FALSE (vide) 1
useOptimizedInitialGrant BTSEquipment FALSE (vide) 1
isGrantingEdchUsersInOverloadConditionAllowed BTSEquipment FALSE (vide) 1
120363 Smart phone EDCH resource usage. isNbapCommonMeasRsepsWithRtwpAllowed NodeB FALSE (vide) 1
multiRabBadRadioSmartEdchResourceUsageActivation EdchRncConf FALSE (vide) 1
FDDCell FALSE (vide) 1
multiRabSmartEdchResourceUsageActivation EdchRncConf FALSE (vide) 1
FDDCell FALSE (vide) 1
RemoteFDDCell FALSE (vide) 1
smartEdchResourceUsageActivation BTSEquipment FALSE (vide) 1
EdchRncConf FALSE (vide) 1
ttiCapabilityResourceStatusIndicationActivation BTSEquipment FALSE (vide) 1
EdchRncConf FALSE (vide) 1
rabQosSmartEdchResourceUsageActivation EdchRncConf FALSE (vide) 1
uplinkThresholdSmartEdchResourceUsageActivation EdchRncConf FALSE (vide) 1
cellLoadS1ThresholdSmartEdchResourceUsageActivation EdchRncConf FALSE (vide) 1
srbSmartEdchResourceUsageActivation EdchRncConf FALSE (vide) 1
133975 Hosting of 2 NodeBs WCDMA in one d4U neIdOfPartner BTSEquipment N.A. (vide) 1
LR14.2 100894 UMTS to LTE Handover isBlindHoLteAllowed NeighbouringRNC FALSE (vide) 1
isHandoverToLteForCsFbPreferred FDDCell FALSE (vide) 1
isLteCModeActivationAllowed DlUserService FALSE (vide) 1
isLteIratHoToNextBestCellAllowed RadioAccessService FALSE (vide) 1
isUtraToEutraHhoAllowed RadioAccessService FALSE (vide) 1
typeOfCompoundingNeighbourListLte FDDCell Prl (vide) 1
NeighbouringRNC Prl (vide) 1
eUtranServiceHoRanapIeEnable Imcta FALSE (vide) 1
108103 Enhanced Cell Fach for DL and UL isCommonEdchHsdpcchAllowed FDDCell TRUE (vide) 1
isEaiAllowed FDDCell TRUE (vide) 1
isEdchTti2msECellFachAllowed EdchCellClass FALSE (vide) 1
isEnhancedCellFachForUlAllowed EdchConf FALSE (vide) 1
FDDCell FALSE (vide) 1
RadioAccessService FALSE (vide) 1
isFastL1SyncForECellFachAllowed FDDCell FALSE (vide) 1
121209 Enhanced UE DRX in CELL_FACH isDrxInterruptionByHsdschDataAllowed HsdschDrxInCellFachInfo FALSE (vide) 1
isEnhancedDrxAllowed FDDCell FALSE (vide) 1
RadioAccessService FALSE (vide) 1
124489 Interference and call drop reduction isInterferCallDropReductionFeatureAllowed RadioAccessService FALSE (vide) 1
isInterferenceHoFailCallDropAllowed FDDCell FALSE (vide) 1
NeighbouringRNC FALSE (vide) 1
RemoteFDDCell FALSE (vide) 1
121545 NodeB Supportability Enhancements in UA09 isNbapProprietaryFailureInfosProvisionEnabled BTSEquipment FALSE (vide) 1
isNbapProprietaryFailureInfosTracingEnabled GeographicalSession FALSE (vide) 1
98610 RRC Connection Attempts Filtering isRejectSentOnRrcRegistrationFiltering RRCFiltering FALSE (vide) 1
isRrcRegistrationFilteringAllowed RadioAccessService FALSE (vide) 1
127580 OneBTS parameters for Distributed Antenna System isSib5PcpichPwrActivated RadioAccessService FALSE (vide) 1
122612 E-DCH performance enhancement isSrbOnEdchEligibilityReEvaluated RadioAccessService FALSE (vide) 1
LR14 75057 Iu-CS Alcap modification in Q2630.2 isTrspBearerModificationAllowedOnIurAsDrnc4Dch RadioAccessService FALSE (vide) 1
isTrspBearerModificationAllowedOnIurAsSrnc4Dch RadioAccessService FALSE (vide) 1
isTrspBearerModificationAllowedOnSrnc4Dch RadioAccessService FALSE (vide) 1
75093 HSPA transport bearer replacement on ATM & IP isTrspBearerReplacementAllowedOnSrnc4Dch RadioAccessService TRUE (vide) 1
isTrspBearerReplacementAllowedOnSrnc4Hspa RadioAccessService FALSE (vide) 1
Total général 850