Professional Documents
Culture Documents
Procédés de soudage
té AWS D1.1/D1.1M
Nouveau
2015 Edition 2015
General:
All tubular provisions, tables, and figures moved to a new “Tubular Structures” Clause and corresponding new section of
commentary
Incorporation of AWS A5.36, Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored Arc
Welding and Metal Cored Electrodes for Gas Metal Arc Welding
Steels not recommended for PWHT: added ASTM A709 Grade HPS 100W [HPS 690W] and deleted ASTM A709 100 (690)
and 100W (690W)
Design:
Clarification regarding calculation of effective throat of a combination PJP flare bevel groove weld and fillet weld
Additional provisions for wrapping welds on opposite sides of a common plane to permit seal welding
Fatigue curve cases and figures revised to align with AISC 360
Fabrication:
Clarification of baking requirements for low-hydrogen electrodes for ASTM A514 and A517 steels
Clarification of preheat and interpass temperature requirements for combinations of base metals Editeur : AWS
Date de parution : 08.2015
Updated requirements fo rbacking and for substrate cleanliness
Clarification of provisions for oxygen gouging Support : PDF sécurisé
Clarification when locations of the depth of the web from tension flanges Langue : anglais
of beams or girders are considered outside the tension zone for tack welds and
construction aid welds
Bon de commande au dos Revisions to the location and sequence of member and element splices
à nous retourner par Clarification of weld profile requirements
fax, email ou courrier
ou commandez en ligne Inspection:
Clarification regarding retesting based on quality of work
New table for qualification and calibrations requirements of U/T equipment
a +33 1 40 02 03 12 Clarification regarding calibration for sensitivity and horizontal sweep of U/T
equipment
a commande@normadoc.fr
a www.normadoc.com Annexes:
New figures to clarify effective throat for various joint types and combinations
Terms and definitions are now normative Retrouvez l’essentiel
Sample welding forms extensively revised
Safe practices has been deleted - Clause 1 includes references for safety des documents relatifs
aux Procédés de soudage
NORMADOC
www.normadoc.com
12, Rue de Capri - F-75012 Paris
info@normadoc.fr
FRANCE
Librairie technique, scientifique & industrielle Janvier 2016 - B0285
Procédés de soudage
Qté Référence - Titre Edition Langue Prix HT Prix TTC Total TTC
D1.1/D1.1M:2015 structural welding 08.2015 anglais 565,00 € 596,08 €
NORMADOC vous conseille aussi :
ASME BPVC - Section IX 07.2015 anglais 403,00 € 425,17 €
NF A89-061, NF EN ISO 14373 05.2015 français 59,75 € 63,04 €
Corrosion des pièces soudées 02.2015 français 30,00 € 31,65 €
Génie mécanique 05.2015 français 52,16 € 55,00 €
Total TTC
1 Frais de port & gestionj 6,80 € 8,16 € 8,16 €
j
Frais de port hors France métropolitaine : nous consulter
TVA : 5,5 % pour document - 20 % pour port
Net à payer
NORMADOC
www.normadoc.com
12, Rue de Capri - F-75012 Paris
info@normadoc.fr
FRANCE