1) A rectangular lamina of side 40mm x 65mm. Draw its isometric drawing.
2) A circular lamina of diameter 60 mm. Draw its isometric view. 3) A frustum of cone with base diameter 50 mm, top diameter 25 mm and height 40 mm rest centrally on a square block of base side 65 mm and thickness 25 mm. Draw its isometric view. 4) A cube of 30 mm side rest on another 45mm cube. The combination of cube rest centrally on a square block of side 70 mm side and 25 mm height. Draw its isometric projection. 5) A sphere of diameter 40 mm rest centrally on a top of a hexagonal prism with base side 30 mm and height 60 mm. draw isometric drawing. 6) A hemi sphere of 50 mm diameter rests on a circular base centrally on a top of a cylinder having 30 mm diameter and 50 mm height. Draw the isometric view of the combination. 7) A cylindrical slab 60 mm diameter 25 mm thick is surmounted by a cube of 35 mm edge on a top of a slab. A square pyramid altitude 35 mm and side of base 20 mm rest on combination, the axes of two solids are in same straight line. Draw the isometric projection on a solid. 8) A cylinder of base diameter 40 mm and height 65 mm centrally on a top of a rectangular face of hexagon prism with 30 mm base side and 70 mm height, which is resting on a rectangular face on HP with axis parallel to VP. Draw the isometric drawing. 9) A frustum of a right regular hexagonal pyramid of base side of base hexagon 30 mm and top side of hexagon 15 mm and height 40mm rest centrally on a top of a square block of 65 mm side and 25 thick. Draw the isometric projection. 10) A hemisphere of diameter 60 mm with cutting at height of 50mm from lower base is placed on the top of pentagonal prism of base side 30mm and height 65mm. 11) Draw the isometric projection of following figure in the diagrams shown below.