Professional Documents
Culture Documents
ADDPLUG is a high performance cross linked sodium polyacrylate based hydrophilic polymer with
extreme water absorbance capacity which enables plug formation in the zones of lost circulation.
Application
Product performs as plug in the zones of lost circulation. It holds water by absorption and plugs
fissures and high permeable zones by swelling to many times of its actual size. The fine particles
swell together in the zone and completely fill the area.
Properties
Chemical Composition Cross-linked Polymer
Appearance White granular powder
Hydrated - Transparent Gel
Bulk Density 0.62 to 075 gm per CC
0.9 % NaCl Absorption
Capacity ( g / g ) 15-20
Maximum absorbance 300 in de-ionized water.
Shelf Life Two years from date of manufacturing
when kept in ideal condition
User Guidelines
Product should be dispersed in fresh water before pumping in the bore hole. When swelling is
visible it should be pumped to the zone of lost circulation. Drilling may commence after 30 to 45
minutes of pumping the mixture in the bore hole. Product may be used in a ratio of 5 to 15 kg per
1000 liters of water as per requirement.
Packing
15 kg in HDPE pails.
DISCLAIMER
THIS PRODUCT LITERATURE IS BASED ON DATA CONSIDERED ACCURATE. HOWEVER NO WARRANTY IS EXPRESSED
OR IMPLIED REGARDING THE ACCURACY OF THESE DATA OR THE RESULTS TO BE OBTAINED FROM THE USE
THEREOF. AB EMULTECH PRIVATE LIMITED ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE TO VENDORS OR USERS.