Professional Documents
Culture Documents
MasterRoc MP 755
Highly reactive, two component polyurethane injection foam to stop high volume water
ingress and for ground consolidation.
MasterRoc MP 755
strongly advised. The length of the static mixer
should be approximately 32 cm. Safety precautions
Avoid contact with skin and eyes by using the
Note: MasterRoc MP 755 is not suitable for large required personal protective equipment, such as
volume void filling. overalls, gloves and safety glasses. If contact with
skin occurs, wash thoroughly using soap and
Cleaning of injection equipment water. If contact with eyes occurs, rinse
For short breaks in the injection procedure, pump thoroughly with an eyebath filled with boracic
Part A through the in-line static mixer nozzle. solution and seek medical advice. Refer to the
After finishing the injection, pump an appropriate Material Safety Data Sheet for safety measures.
agent or oil which does not contain water through The products are harmless.
the pump and injection lines.
Uncured products should be prevented from
Storage entering local drainage systems and water courses.
If stored in dry conditions in unopened, tightly
Spillage must be collected using absorbent
closed original containers and within a
materials such as sawdust and sand, and disposed
temperature range of +5°C and +35°C, the
of in accordance with local regulations.
components of MasterRoc MP 755 have a shelf
life of 12 months.
The information given here is true, represents our best knowledge and is based not only on laboratory work but also on
field experience. However, because of numerous factors affecting results, we offer this information without guarantee
and no patent liability is assumed. For additional information or questions, please contact your local representative.
Headquarters: