Professional Documents
Culture Documents
Application
ADDRILL EA (HS) should be added in fresh water to get a highly viscous drilling fluid. The
marsh funnel viscosity for clay or shale formation should be ≥ 45 seconds per quart (946
ml) and ≥ 60 seconds per quart (946 ml) for sandstone or unconsolidated sand.
Properties
Chemical Composition : Ter-polymer
Appearance : Liquid off white / whitish emulsion.
Ionic : Anionic
pH (0.5% soln. in distt. water) : 7.5 ± 1.0
Boiling point : ≥ 175o C (For oil phase)
Specific gravity : 1 to 1.1
Solubility : Easily soluble in water.
User guidelines
1. Add 1.0 to 3 kg or liter of ADDRILL EA (HS) per 1000 liter of water under
continuous stirring or alternatively it may be added by slowly pouring the product
in the water stream of recirculating pump into the pit.
2. Product is ready for use when desired funnel viscosity is achieved.
3. Hardness and chloride of make up water used for preparing solution of this
product should be less than 150 ppm and 1500 ppm respectively.
Packing: 35 kg HDPE carboy. Higher volume available subject for bulk supply.