Professional Documents
Culture Documents
MP35N Alloy®
MP35N® is a nickel-cobalt base alloy of the
Multiphase® alloy system that has a unique Typical Composition
combination of properties - ultra high strength,
toughness, ductility and outstanding corrosion Ni Co Cr Mo
resistance.
35 35 20 10
The alloy is work-strengthened and aged to obtain strength levels of
260 to 300 ksi (1793-2086 MPa) in its full strength and stress corrosion
cracking resistance (SCC) for harsh environments. MP35N® alloy resists
corrosion in hydrogen sulfide, salt water and other chloride solutions,
as well as the mineral acids (nitric, hydrochloric, sulphuric). In addition,
it has exceptional resistance to crevice cracking in seawater and other
hostile environments.
Mechanical Properties
MPa
350 2413
300
2000 U.T.S
300 2068
250
0.2% Y/S.
1500
Strength (ksi)
250 1724
200
200 1379
150 60
Ductility _ %
1000 R. of A.
Strength
150 1034
100 40
500
100 689
50 20
0% 15% 30% 45% 60% 75% 90% % Enlong
Percent Reduction
This figure shows the effect of work-strengthening (by cold drawing) 0
on MP35N® alloy tensile strength.
as 800 1000 1200 1400 °F
drawn 400 500 600 700 °C
Temp.
This figure shows the effect of aging 4 hours at temperature on
© COPYRIGHT 2008 by Latrobe Speciality Steel Co. tensile properties of MP35N alloy work-strengthened before aging by
® Registered Trademark of SPS Technologies, Inc. cold drawing to 240 ksi.
Email: enquiries@neonickel.com
www.neonickel.com
MP35N® ALLOY
Mechanical Properties - Bar
Bar Dia. Guaranteed Minimum Properties Nominal Properties* Specifications**
Annealed
Larger bar sizes may be referred to Latrobe Specialty Steel on a individual basis.
* Nominal properties are provided for information only, and are not to be used for design purposes. ** AMS 5844 material is supplied in the cold drawn or pilgered conditions,
“capable of” full strength after aging (1000 - 1200°F/4 hrs). ** AMS 5845 and NACE MR0175 materials are supplied in the aged condition.
Email: enquiries@neonickel.com