Professional Documents
Culture Documents
retaining rings 10
DUBO
retaining rings for
socket head screws 11
KORREX
insulating bushes
type lI / M 14
KORREX
insulating bushes
type II / WW 14
KORREX
insulating bushes
type I / WW 14
DUBO
toothed collar rings 15 / 16
O R I G I N A L
KORREX
snapcaps 17
KORREX
protective caps for
socket head screws 18
KORREX
flat washers 21
KORREX
hexagon nut caps 22
KORREX
rosettes 23
ORIGINAL
10
Patented throughout
the world.
DUBO retaining rings
can be used in
conjunction with:
DUBO toothed collar rings
KORREX insulating bushes
KORREX protective caps
Insulation and protection of the surface of the material because DUBO retaining rings:
• are chemically resistant to Alkalis, to solutions of neutral inorganic salts, to oils, fats,
petrol, benzine, alcohol, acetone, diluted acids, and sea water;
• prevent electrolytic corrosion between two different metal surfaces;
• prevent fatigue in the bolt material.
Physical properties:
Tensile strength up to the elastic limit 7 N/mm2
Ultimate tensile strength 26 N/mm2
Modulus of elasticity 66 N/mm2
Breakdown voltage 18 kV/mm
Rockwell hardness 115° R
Specific gravity 1,14
ORIGINAL
10
without with
Part.No. Metric Inch D d H h toothed collar ring packing
threads threads V1 V2 unit/pcs
1002000000000 M 2 5,30 2,10 1,50 0,50 3,50 500
Dimensions in mm
1003000000000 M 3 8,00 3,20 2,20 0,80 5,00 500
1003500000000 M 3,5 9,00 3,80 2,40 0,90 5,50 500
1004000000000 M 4 9,50 4,15 2,60 1,00 6,00 500
1005000000000 M 5 10,60 5,15 3,00 1,20 7,00 500
1006000000000 M 6 12,70 6,20 3,50 1,40 8,50 9,25 500
1006001000000 1/4" 12,70 6,50 3,50 1,40 8,50 9,25 500
1007000000000 M 7 14,50 7,10 3,80 1,50 9,00 9,75 500
1008000000000 M 8 16,20 8,10 4,00 1,60 10,50 11,50 500
1009000000000 3/8" 19,60 9,70 4,50 1,80 12,50 13,50 100
1010000000000 M 10 19,60 10,20 4,50 1,80 12,50 13,50 500
1011000000000 7/16" 21,90 11,30 4,70 1,90 13,50 15,00 100
1012000000000 M 12 23,60 12,20 5,00 2,00 14,50 16,00 500
1013000000000 1/2" 25,40 12,80 5,00 2,00 16,00 17,50 100
1014000000000 M 14 25,40 14,20 5,50 2,10 16,50 18,00 100
1015000000000 9/16" 28,60 14,40 5,50 2,10 18,00 19,50 100
1016000000000 M 16 29,40 16,20 6,00 2,20 19,00 20,75 100
1017000000000 5/8" 31,20 16,00 6,00 2,20 19,00 20,75 100
1018000000000 M 18 35,10 18,20 6,50 2,30 21,50 23,25 100
1019000000000 3/4" 36,90 19,20 7,00 2,40 23,00 24,75 100
1020000000000 M 20 35,70 20,30 7,00 2,40 23,00 24,75 100
1022000000000 M 22 41,60 22,50 7,50 2,50 24,50 26,50 100
1024000000000 M 24 41,60 24,30 8,00 2,60 26,00 28,00 100
1025000000000 1" 47,30 25,60 8,00 2,60 28,00 30,00 100
1027000000000 M 27 47,30 27,30 8,50 2,70 28,50 30,50 100
1030000000000 M 30 53,10 30,20 8,50 2,80 30,50 32,50 100
1033000000000 M 33 57,70 33,20 9,00 3,00 34,00 36,00 100
1036000000000 M 36 63,50 36,20 10,00 3,20 38,00 40,00 100
1039000000000 M 39 69,30 39,20 11,00 3,40 41,00 100
1042000000000 M 42 74,00 42,20 13,00 3,80 45,00 100
1045000000000 M 45 80,80 45,20 16,00 4,20 51,00 100
1048000000000 M 48 86,50 48,20 17,00 4,50 55,00 100
1052000000000 M 52 92,40 52,30 17,00 4,60 57,00 100
ORIGINAL
for socket headscrews 11
The specifications of DUBO retaining rings used in conjunction with DUBO toothed collar
rings also apply in principle for DUBO retaining rings for socket head screws. It is the
same ring, but with special dimensions to suit socket head screws.
1. The screw should be tightened until the outer reinforcing rim of the ring is distorted and
has engaged around the head of the screw. The screw generally then has the right ini-
tial stress. Because the material of the ring slides over the surface of the surrounding
component, it feels as if the screw still needs further tightening, but this is not so. The
required initial stress is obtained immediately on distortion of the ring and the screw is
then completely locked.
Further tightening of the screw is harmful.
2. The smoothest finish possible on the bearing surface of the component improves the
locking and sealing.
3. The correct diameter of ring should be used for each thread diameter.
4. Where the DUBO retaining ring is used with a DUBO toothed collar ring the screw can
be tightened up to any permitted torque value.
ORIGINAL
for socket headscrews 11
ORIGINAL
for screwed assemblies with 14
metric threads
When two metals are in contact and moisture collects between their surfaces, electrolytic
corrosion occurs owing to ion-exchange, which attacks the material.
This can be avoided by the use of KORREX insulation bushes of superpolyamide, and are
recommended for the following combination of metals:
When used in
conjunction with
KORREX caps,
they offer protection
from corrosion.
KORREX insulating
bushes can be used in
conjunction with:
KORREX caps
DUBO retaining rings
ORIGINAL
for screwed assemblies with 14
metric threads
brass
nylon film
iron
TYPE ll / M
ORIGINAL
for screwed assemblies with 14
inch threads
When two metals are in contact and moisture collects between their surfaces, electrolytic
corrosion occurs owing to ion-exchange, which attacks the material.
This can be avoided by the use of KORREX insulation bushes of superpolyamide, and are
recommended for the following combination of metals:
When used in
conjunction with
KORREX caps,
they offer protection
from corrosion.
KORREX insulating
bushes can be used in
conjunction with:
KORREX caps
DUBO retaining rings
ORIGINAL
for screwed assemblies with 14
inch threads
brass
nylon film
iron
DUBO retaining ring
TYPE ll / WW
ORIGINAL
for screwed assemblies with 14
inch threads
When two metals are in contact and moisture collects between their surfaces, electrolytic
corrosion occurs owing to ion-exchange, which attacks the material.
This can be avoided by the use of KORREX insulation bushes of superpolyamide, and are
recommended for the following combination of metals:
When used in
conjunction with
KORREX caps,
they offer protection
from corrosion.
KORREX insulating
bushes can be used in
conjunction with:
KORREX caps
DUBO retaining rings
ORIGINAL
for screwed assemblies with 14
inch threads
nylon film
iron
TYPE l / WW
ORIGINAL
15 / 16
The DUBO toothed collar ring is an unique addition to the DUBO retaining ring, and is
intended for use in combination with high quality steel nuts (8.8). It will now be possible to
admit any desired bolt tension without damaging the DUBO retaining ring on account of
high bolt and nut loads, whereas this invention also permits to use whatever nut as a loc-
king nut, which can be re-used. By putting the DUBO retaining ring into this toothed collar
ring, optimum deformation of the DUBO ring is obtained after tightening the nut. The
deformation of the DUBO ring causes the locking and tightening effect according to the
DUBO principle.
At the spots where the tooths have been provided, the DUBO retaining ring is perforated
under high pressure and after complete deformation, constitutes an unity between toothed
collar ring and nut. When this situation is obtained, the nut to be locked has come into
contact with the steel tooths.
From this moment on, every desired bolt pressure can be admitted; in fact a partly rigid
connection between steel on steel and nylon is obtained. Due to the fact that the DUBO
ring is compressed under high pressure between the tooths of the collar ring, a constant
elastic action is obtained.
Advantages:
1. the DUBO retaining ring can from now on take up any desired bolt pressure, such as
for bolts 8.8 and 10.9 and lock these bolts against loosening;
2. it is possible to make a locking nut out of any nut;
3. it can be re-used many times;
4. the locking material lies under the nut: thus damping, tightening, locking at constant
bolt pressure;
5. high friction coefficient due to the combination of steel dents and DUBO retaining ring;
6. nylon DUBO retaining ring can be used now with higher temperatures (± 180°C);
7. metallic contact (electrical purposes) is obtained in cases where it is required;
8. excellent lockwasher for tap-bolts.
ORIGINAL
15 / 16
ORIGINAL
17
ORIGINAL
17
ORIGINAL
for socket head screws 18
Because of the many advantages offered by socket head screws in comparison with nor-
mal hexagon-head screws, the use of socket head screws is increasing all the time. A dis-
advantage of them is however the accumulation of dirt in the socket, making them some-
times difficult to unscrew.
This problem is solved in a simple manner by usipg KORREX protective caps.
In addition to their use as protective caps for socket head screws, KORREX protective
caps can also be used for other purposes, for example to seal the ends of tubes or to seal
drilled holes.
In fact the possible uses of KORREX caps are unlimited.
Advantages:
• no corrosion of the screw head;
• the screw is easier to undo;
• the protective caps are easy to fit and can be re-used many times;
• the improve the appearance of all assemblies;
• reduced maintenance costs;
• unlimited possible applications.
ORIGINAL
for socket head screws 18
ORIGINAL
21
The KORREX flat washer detent is chemically resistant to alkalis, saline, inorganic
solutions neutral, weak oils, fats, gasoline, benzine, alcohol, acetone, acids and water of
sea.
ORIGINAL
21
D
d
ORIGINAL
22
The recently developed KORREX hexagon nut caps, which offer the advantages referred
to below, will without doubt find wide use in all branches of industry
These KORREX nut caps convert any hexagon nut into a dome nut without modifying the
existing assembly or connection.
The nut cap merely has to be pressed over the flats of the nut after the connection has
been assembled.
By simple application to
any hexagon nut the effect
of a dome nut is obtained.
KORREX hexagon nut
caps can be used in
conjunction with
KORREX insulating
bushes and
DUBO retaining rings
Advantages:
Dome nuts are no longer necessary;
The thread is sealed;
Both bolt and nut are protected;
Protection against corrosion;
Saving in weight;
Protection against accidents;
Simple assembly;
Attractive appearance;
The nut caps can be used over and over again.
Important:
The KORREX nut caps, used in conjunction with KORREX insulating bushes and DUBO
retaining rings, guarantee reliable insulation of bolted connections, at the same time
securing the nut and bolt against loosening.
ORIGINAL
22
ORIGINAL
23
KORREX rosettes can be used on all bolts and screws with countersunk head.
By applying these rosettes damage to the surface is avoided, damage which not only
gives a bad appearance but which may also have unfavourable effects.
ORIGINAL
23
ORIGINAL
24
The recently developed KORREX nut caps, which offer the advantages referred to below,
will without doubt find wide use in all branches of industry. These KORREX nut caps con-
vert any hexagon nut into a dome nut without modifying the existing assembly or connec-
tion.
The nut cap merely has to be pressed over the flats of the nut after the connection has
been assembled.
By simple application to
any hexagon nut the effect
of a dome nut is obtained.
KORREX nuts caps
can be used in
conjunction with
KORREX insulating
bushes and
DUBO retaining rings
Advantages:
Dome nuts are no longer necessary;
The thread is sealed;
Both bolt and nut are protected;
Protection against corrosion;
Saving in weight;
Protection against accidents;
Simple assembly;
Attractive appearance;
The nut caps can be used over and over again.
Important:
The KORREX nut caps, used in conjunction with KORREX insulating bushes and DUBO
retaining rings, guarantee reliable insulation of bolted connections, at the same time
securing the nut and bolt against loosening.
ORIGINAL
24