The document provides instructions for constructing five engineering curves: a parabola using the rectangle method with a base of 160mm and height of 100mm, a hyperbola with a double ordinate of 90mm, abscissa of 35mm, and half transverse axis of 45mm, an involute of a circle with diameter 40mm, a cycloid generated by a circle of diameter 50mm rolling, and a helix with one revolution around a cylinder of base diameter 40mm and pitch of 60mm.
The document provides instructions for constructing five engineering curves: a parabola using the rectangle method with a base of 160mm and height of 100mm, a hyperbola with a double ordinate of 90mm, abscissa of 35mm, and half transverse axis of 45mm, an involute of a circle with diameter 40mm, a cycloid generated by a circle of diameter 50mm rolling, and a helix with one revolution around a cylinder of base diameter 40mm and pitch of 60mm.
The document provides instructions for constructing five engineering curves: a parabola using the rectangle method with a base of 160mm and height of 100mm, a hyperbola with a double ordinate of 90mm, abscissa of 35mm, and half transverse axis of 45mm, an involute of a circle with diameter 40mm, a cycloid generated by a circle of diameter 50mm rolling, and a helix with one revolution around a cylinder of base diameter 40mm and pitch of 60mm.