Professional Documents
Culture Documents
Pooja Report PDF
Pooja Report PDF
SEMINAR REPORT
Degree
of
BACHELOR OF TECHNOLOGY
In
ELECTRICAL ENGINEERING
2019
CANDIDATE DECLARATION
I hereby declare that the work, which is being presented in the Seminar, entitled “ANALYSIS
AND DESIGN OF FLYBACK CONVERTER” in partial fulfillment for the award of Degree of
“Bachelor of Technology” in Electrical Engineering submitted to the Department of Electrical
Engineering, Jodhpur Institute of Engineering and Technology, Rajasthan Technical University is
a record of my own work carried under the Guidance of Prof.Vinit Mehta Asso. Prof., of
Department of Electrical Engineering, Jodhpur Institute of Engineering and Technology.
I have not submitted the matter presented in this Seminar anywhere for the award of any other
Degree.
(Ms.Pooja Bhati)
15EJIEE037
(IV B.Tech., VIII Sem)
i
CERTIFICATE
This is to certify that the seminar report entitled “ANALYSIS AND DESIGN OF FLYBACK
CONVERTER”, being submitted by Ms. Pooja Bhati (IV B. Tech., VIII Sem.) for the partial
fulfillment of the requirements of the Degree Bachelor of Technology in Electrical Engineering of
Jodhpur Institute of Engineering & Technology, Jodhpur is a record of the seminar taken by her.
The matter embodied in this seminar report has not been submitted earlier for the award of any
other degree.
Guided By:
Prof.Vinit Metha
(Asso.Prof.,EE Dept.)
Date:
Place: Jodhpur
ii
ACKNOWLEDGEMENT
I would like to extend my heartfelt thanks and deep sense of gratitude to all those who helped me
in seminar. First and foremost, I would like to express my sincere thanks to the Guide, Prof .Vinit
Mehta( Asso. Prof., EE dept.)
We are highly grateful to Prof. Shilpa Dandwani (Asst. Prof., EE dept) and JIET for providing
us this opportunity to carry out the independent study on this topic.
The divine support is given by our seminar associate Prof.(Dr.) Kusum Agarwal (Head EE
Dept.) who gave me the golden opportunity for making this seminar report.I would like to make a
number of acknowledgement to those who have helped us to prepare this seminar,without them
the work would not possible.
Pooja Bhati
15EJIEE037
(IV-B.Tech.,VIII Sem.)
iii
ABSTRACT
Electricity is the most versatile and widely used form of energy. The low cost of electricity is, generally,
important. In this seminar, the Flyback converter, composed of ideal transformer and output capacitor, is
used to extract the maximum power from photovoltaic module. With two separate transformers, the
proposed converter allows a low-profile design to be ready and Implement. Owing to the presence of
coupled inductor, the proposed converter efficiently alleviates and the input current ripples are in the
acceptable level. The design and performance of the proposed converter are validated with experimental
results. Flyback converter is a buck-boost type DC-DC converter. This converter has low cost and multiple
output power supplies. The maximum efficiency of this converter is 98% in software simulation.
iv
LIST OF FIGURE
v
CONTENT
Candidate Declaration i
Certificate ii
Acknowledgement iii
Abstract iv
List of figures v
Chapter 1 INTRODUCTION 1
Chapter 2 LITERATURE SURVEY 2
Chapter 3 DIFFERENT TYPES OF DC-DC CONVERTER 3-5
4.1 CONSTRUCTION 6
TRANSFORMER
MODES
vi
Chapter 8 DIFFERENT TECH.OF FLYBACK CONVERTER 12-13
Chapter 10 CONCLUSION 16
REFERENCE 17
vii