Professional Documents
Culture Documents
Abaqus Tutorial2 PDF
Abaqus Tutorial2 PDF
http://onlyamodel.com/2011/introduction-to-abaqus-fea-tutorial/
*Node
1, 75., 150., -100.
2, 50., 150., -100.
3, 25., 150., -100.
4, 0., 150., -100.
5, 75., 125., -100.
6, 50., 125., -100.
7, 25., 125., -100.
8, 0., 125., -100.
9, 75., 100., -100.
*Element, type=C3D8R
1, 920, 921, 1004, 945, 915, 916, 941, 940
2, 921, 922, 1005, 1004, 916, 917, 942, 941
3, 922, 923, 1006, 1005, 917, 918, 943, 942
4, 923, 924, 946, 1006, 918, 919, 944, 943
5, 945, 1004, 1007, 958, 940, 941, 954, 953
6, 1004, 1005, 1008, 1007, 941, 942, 955, 954
7, 1005, 1006, 1009, 1008, 942, 943, 956, 955
8, 1006, 946, 959, 1009, 943, 944, 957, 956
*Elset, elset="AL set", generate
1, 320, 1
*Elset, elset="Steel Set", generate
321, 960, 1
** Section: Al section
*Solid Section, elset="AL set", material=Al
** Section: Steel section
*Solid Section, elset="Steel Set",
material=Steel
**
** MATERIALS
**
*Material, name=Al
*Elastic
70., 0.3
*Material, name=Steel
*Elastic
210., 0.3
**
*Nset, nset=Set-1, instance=Part-1-1
384, 385, 386, 387, 412, 413, 414, 415, 422, 423, 424, 425, 432, 433,
434, 435
442, 443, 444, 445, 688, 695, 702, 709, 716
** BOUNDARY CONDITIONS
**
** Name: BC-1 Type: Symmetry/Antisymmetry/Encastre
*Boundary
Set-1, ENCASTRE
*Elset, elset=_Surf-1_S2, internal, instance=Part-1-1, generate
1, 16, 1
** STEP: Step-1
**
*Step, name=Step-1, perturbation
*Static
**
** LOAD CASES
**
*Load Case, name=LoadCase-1
** Name: BC-1 Type: Symmetry/Antisymmetry/Encastre Scale
factor: 1
*Boundary, op=NEW
Set-1, ENCASTRE
** Name: Load-1 Type: Surface traction Scale factor: 1
*Dsload, op=NEW, constant resultant=YES
Surf-1, TRSHR, -1., 0., 1., 0.
*End Load Case
*End Step
*Elset, elset=_Surf-1_S2, internal, instance=Part-1-1, generate
1, 16, 1
** STEP: Step-2
**
*Step, name=Step-2, perturbation
*Static
** LOAD CASES
**
*Load Case, name=LoadCase-2
** Name: BC-1 Type: Symmetry/Antisymmetry/Encastre Scale
factor: 1
*Boundary, op=NEW
Set-1, ENCASTRE
** Name: Load-2 Type: Surface traction Scale factor: 1
*Dsload, op=NEW
Surf-1, TRVEC, 1., 1., 0., 0.
*End Load Case
*End Step
Execute Abaqus CAE
Import .sty file fro ProE
Steel part (imported from ProE)