Professional Documents
Culture Documents
APLACO Pressure Catalouge PDF
APLACO Pressure Catalouge PDF
CONTENTS
Section-1
- Pipe Fittings for Solvent Cement Jointing ………………………………. Pages 4 – 22
Section-2
1
General Information
*Highlighted fittings in the catalogue are NON- Samples of APLACO fittings are taken at
APLACO fittings which are imported from VDL- random from the production and submitted to our
Holland & +GF+ Switzerland to complete the
range quality control lab for Pressure Tests.
Standards : APLACO Fittings are in accordance Dimensions : All dimensions are given in
with the following standards mm
2
List of Abbreviations
List Of Abbreviations :
BS British Standard
DN Nominal Diameter
Kg Weight in Kilograms
Rc Taper female thread , Pressure tight in the thread to ISO 7-1 / DIN 2999-1
AL Number of bolts
S Socket
Spg Spigot
3
Pressure Fittings for
Solvent Cement Jointing
Quantities
d PN Code No. D L z Kg
Box Pallet
25 16 1721.000.107 32.5 69 50 0.048 72 3600
40 16 1721.000.109 49 106 80 0.145 36 1050
4
Pressure Fittings for
Solvent Cement Jointing
5
Pressure Fittings for
Solvent Cement Jointing
6
Pressure Fittings for
Solvent Cement Jointing
7
Pressure Fittings for
Solvent Cement Jointing
Crosses, PVC-U
(S X S X S X S)
VDL-HOLLAND MADE
Quantities
d PN Code No. D L z Kg
Box Pallet
20 16 0721 300 106 30 30 14 0.037 - -
25 16 0721 300 107 36 33 14 0.057 - -
32 16 0721 300 108 44 39 17 0.092 - -
40 16 0721 300 109 53 49 23 0.160 - -
50 16 0721 300 110 64 60 28 0.260 30 540
63 16 0721 300 111 80 74 34 0.500 5 240
75 10 0721 300 112 92 82.5 40 0.660 3 216
90 10 0721 300 113 106 97 48 0.960 4 144
110 10 0721 300 114 128 117 58 1.600 4 72
8
Pressure Fittings for
Solvent Cement Jointing
9
Pressure Fittings for
Solvent Cement Jointing
10
Pressure Fittings for
Solvent Cement Jointing
Reducing Bushes,
(SPG X RP)
Quantities
d - RP PN Code No. L z z Kg
Box Pallet
25-1/2" 16 3121910437 41 27 21 0.017 200 14400
32-3/4" 16 3121910441 48 32 33 0.026 140 10080
40-1/2" 16 3121910448 44 25 30 0.028 -- --
40- 1" 16 3121910446 56 38 60 0.049 60 4320
50-1/2" 16 3121910455 49 30 30 0.047 -- --
50-11/4" 16 3121910452 66 46 99 0.085 70 2520
63-11/2" 16 3121910458 77 57 150 0.160 110 1980
Reducing Bushes,
VDL-HOLLAND MADE
Quantities
d - RP PN Code No. L z z Kg
Box Pallet
20-3/8" * 16 0721910434 35 24 15 0.015 100 --
Reducing Sockets,
(S X S)
Quantities
d – d1 PN Code No. D L z Kg
Box Pallet
25-20 16 1721910137 32 38 3 0.014 200 14400
32-20 16 1721910140 40 44 3 0.022 180 12960
32-25 16 1721910141 40 41 3 0.021 180 2960
40-20 16 1721910144 49 51 3 0.035 100 7200
40-25 16 1721910145 49 48 3 0.032 100 7200
40-32 16 1721910146 49 45 3 0.031 100 7200
50-25 16 1721910150 60 65 8 0.058 50 2400
50-32 16 1721910151 60 62 9 0.055 50 2400
50-40 16 1721910152 60 60 8 0.050 50 2400
63-50 16 1721910158 75 79 8 0.108 30 2160
11
Pressure Fittings for
Solvent Cement Jointing
12
Pressure Fittings for
Solvent Cement Jointing
13
Pressure Fittings for
Solvent Cement Jointing
Quantities
d-RP PN Code No. L z s Kg
Box Pallet
20- ½” 16 3121 910 206 35.5 5 32 0.021 200 14400
25- ¾” 16 3121 910 207 40 5 36 0.027 140 10080
32-1” 16 3121 910 208 45 5 46 0.047 80 5760
40-1 ¼” 16 3121 910 209 51 5 55 0.071 90 3240
50-1 ½” 16 3121 910 210 59 7 65 0.101 72 2592
63-2” 16 3121 910 211 69 7 80 0.168 75 1350
14
Pressure Fittings for
Solvent Cement Jointing
Unions, PVC-U
(S X S), O-Ring: EPDM
Quantities
d PN Code No. G D I1 I2 Z1 Z2 Z2
Box Pallet
20 16 3121.510.106 -- 54 29 39 5.7 7 0.076 50 --
25 16 3121.510.107 -- 60 33 33 6.5 7 0.103 90 --
32 16 3121.510.108 -- 69 37 36 7 8 0.154 50 --
40 16 3121.510.109 -- 80 40 39 7.5 8.5 0.222 30 --
50 16 3121.510.110 -- 8 45 45 8 8.5 0.240 24 --
63 16 3121.510.111 -- 101 48 49 8.8 10 0.325 18 --
Unions, PVC-U
VDL-HOLLAND MADE
Quantities
d PN Code No. G D I1 I2 Z1 Z2 Z2
Box Pallet
16 16 0721.510.105 ¾" 35 17 24 3 10 0.025 100 9600
75 16 0721.510.112 3½" 135 47 62 3 18 0.615 2 192
90 16 0721.510.113 4" 158 56 69 5 18 0.925 2 144
110 16 0721.510.114 4½" 188 66 72 5 11 1.425 1 72
15
Pressure Fittings for
Solvent Cement Jointing
Quantities
d-R PN Code No. Kg
Box Pallet
16-3/8” 16 0721.550.905 0.117 180 12960
20- ½” 16 0721.550.906 0.148 100 7200
25- ¾” 16 0721.550.907 0.289 60 4320
32-1” 16 0721.550.908 0.358 36 2592
40-1 ¼” 16 0721.550.909 0.560 22 1584
50- 1 ½” 16 0721.550.910 0.739 18 1296
63-2” 16 0721.550.911 1.142 12 864
75-2 ½” 16 0721.550.912 2.087 2 192
90-3” 16 0721.550.913 2.293 2 192
Quantities
d-Rp PN Code No. Kg
Box Pallet
16-3/8” 16 0721.550.505 0.093 180 12960
20- ½” 16 0721.550.506 0.139 100 7200
25- ¾” 16 0721.550.507 0.235 60 4320
32-1” 16 0721.550.508 0.290 36 2592
40-1 ¼” 16 0721.550.509 0.484 22 1584
50- 1 ½” 16 0721.550.510 0.536 18 1296
63-2” 16 0721.550.511 0.856 12 864
75-2 ½” 16 0721.550.512 1.578 2 192
90-3” 16 0721.550.513 1.687 2 192
16
Pressure Fittings for
Solvent Cement Jointing
Quantities
d-R PN Code No. Kg
Box Pallet
20- ½” 16 0721.530.806 0.156 60 4320
25- ¾” 16 0721.530.807 0.253 40 2880
32-1” 16 0721.530.808 0.352 30 2160
40-1 ¼” 16 0721.530.809 0.569 16 1152
50- 1 ½” 16 0721.530.810 0.697 12 864
63-2” 16 0721.530.811 1.050 5 480
75-2 ½” 16 0721.530.812 1.775 2 192
90-3” 16 0721.530.813 2.286 2 144
Quantities
d-Rp PN Code No. Kg
Box Pallet
20- ½” 16 0721.530.306 0.127 70 5040
25- ¾” 16 0721.530.307 0.205 50 3600
32-1” 16 0721.530.308 0.266 36 2592
40-1 ¼” 16 0721.530.309 0.420 16 1152
50- 1 ½” 16 0721.530.310 0.545 14 1008
63-2” 16 0721.530.311 0.840 10 720
75-2 ½” 16 0721.530.312 1.460 2 192
90-3” 16 0721.530.313 1.797 2 192
17
Pressure Fittings for
Solvent Cement Jointing
Quantities
d-RP PN Code No. z s Kg
Box Pallet
16- 3/8" 16 1721910505 35 27 0.010 340 24480
20- /2"
1
16 1721910506 42 32 0.019 200 14400
25 -3/4" 16 1721910507 47 36 0.024 120 8640
32- 1" 16 1721910508 54 46 0.043 70 5040
40-1 1/4" 16 1721910509 60 55 0.063 100 3600
50-1 1/2" 16 1721910510 66 65 0.099 60 2160
63 - 2" 16 1721910511 78 80 0.168 75 1350
Adapter Nipples
VDL-HOLLAND MADE
Quantities
d-RP PN Code No. z s Kg
Box Pallet
16+20 – ½ 0721.910.556 -- -- -- -- --
32+40 – 1 ¼” 0721.910.559 -- -- -- -- --
50+63 – 2” 0721.910.561 -- -- -- -- --
76+90 – 2 ½” 0721.910.563 -- -- -- -- --
90+110 – 3” 0721.910.564 -- -- -- -- --
110+132 – 4” 0721.910.565 -- -- -- -- --
Quantities
d-RP PN Code No. L z s Kg
Box Pallet
16 - 3/8" 16 1721910705 34 20 27 0.013 300 21600
20- /2"
1
16 1721910706 40 24 32 0.018 175 12600
25- 3/4" 16 1721910707 44 25 36 0.025 120 8640
32 – 1" 16 1721910708 50 28 46 0.040 80 5760
40- 1 /4"1
16 1721910709 57 31 55 0.065 96 3456
50- 1 1/2" 16 1721910710 63 32 65 0.092 90 3240
63 - 2" 16 1721910711 76 38 80 0.163 100 1800
18
Pressure Fittings for
Solvent Cement Jointing
Caps, PVC-U
VDL-HOLLAND MADE
Quantities
d PN Code No. D I Kg
Box Pallet
200 10 0721.960.119 -- -- -- -- --
225 10 0721.960.120 -- -- -- -- --
Quantities
Rp PN Code No. D I s Kg
Box Pallet
3/8" 10 0721.960.605 31.2 18.5 27 0.012 100 12600
1
/2" 10 0721.960.606 37 21 32 0.018 100 12600
3
/4" 10 0721.960.607 41.6 24 36 0.025 100 7200
1" 10 0721.960.608 50 26 46 0.040 100 7200
1 1/4" 10 0721.960.609 59.6 29 55 0.060 100 4500
1 /2"1
10 0721.960.610 65 31 60 0.071 100 3600
2" 10 0721.960.611 81.3 36 75 0.140 50 1800
19
Pressure Fittings for
Solvent Cement Jointing
Quantities
d PN Code No. h l a b z Kg
Box Pallet
16 16 0721.800.105 6 17 29 22 3 0.006 100 12600
20 16 0721.800.106 6 19 34 27 3 0.009 100 12600
25 16 0721.800.107 7 22 41 33 3 0.015 100 12600
32 16 0721.800.108 7 25 50 41 3 0.024 100 7200
40 16 0721.800.109 8 29 61 50 3 0.038 100 4500
Quantities
d PN Code No. h l a z Kg
Box Pallet
50 16 1721.800.110 8 34 73 3 0.058 80 2880
63 16 1721.790.111 9 41 90 3 0.142 52 1872
75 16 1721.790.112 10 47 106 3 0.156 32 1156
90 16 1721.790.113 11 56 125 5 0,253 42 756
110 16 1721.790.114 12 86 150 5 0.403 24 432
160 16 1721.790.117 16 91 213 5 1.058 8 18
200 10 0921.790.119 19 112 248 6 1.80 - -
225 10 1721.790.120 25 125 274 6 1.747 4 72
VDL-HOLLAND MADE
Quantities
d PN Code No. h l a z Kg
Box Pallet
250 10 0721.790.121 23 140 303 9 2.150 - -
280 10 0721.790.122 23 151 329 5 3.036 1 18
315 6 0721.790.123 27 172 379 8 4.578 1 18
400 6 0721.790.125 - - - - - - -
20
Pressure Fittings for
Solvent Cement Jointing
Quantities
d DN Code No. D a k b l AL SC r Kg
Box Pallet
50 40 1721.700.010 150 62 110 16 18 4 M 16x75 2 0.235 20 1440
63 50 1721.700.011 165 78 125 18 18 4 M 16x80 2.5 0.314 30 1080
75 65 1721.700.012 185 92 145 19 18 4 M 16x85 2.5 0.381 27 972
90 89 1721.700.013 200 110 160 20 18 8 M 16x90 3 0.438 24 864
110 100 1721.700.014 220 133 180 22 18 8 M 16x95 3 0.571 10 360
160 150 1721.700.017 285 190 240 28 22 8 M 16x120 4 1.060 9 324
200 200 0921.700.019 315 235 268 36 22 8 M 16x150 4 1.25 -- --
225 200 0921.700.020 340 250 295 32 23 8 M 16x150 4 1.362 8 144
21
Flat Gaskets
Flat Gaskets
For Flange Adaptors Nos. 21.79.01, 21.80.01
Material: EPDM
Hardness: 65o Shore approx.
d Code No. l D h
16 0748.400.014 16 27 2
20 0748.400.015 20 32 2
25 0748.400.016 25 39 2
32 0748.400.017 32 48 2
40 0748.400.018 40 59 3
50 0748.400.019 50 71 3
63 0748.400.020 63 88 3
75 0748.400.021 75 104 3
90 0748.400.022 90 123 3
110 0748.400.023 110 148 4
160 0748.400.026 160 211 4
200 0748.400.029 195 248 5
225 0748.400.027 220 272 5
250 0748.400.116 250 328 6
280 0748.400.032 280 328 6
315 0748.400.033 315 378 6
22
Ball Valves
Ball Valves
Ball valve type 546 PVC-U
With solvent cement socket metric
George Fischer + G.F. + Made
Model:
For easy installation and removal
Ball seals PTFE
Without mounting inserts
z-dimensions, valves end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
kv-value
d DN EPDM
PN (p=1 bar) kg
(mm) (mm) Code
(l/min)
16 10 16 71 0161 546 001 0.150
20 15 16 185 0161 546 002 0.150
25 20 16 350 0161 546 003 0.230
32 25 16 700 0161 546 004 0.330
40 32 16 1000 0161 546 005 0.600
50 40 16 1600 0161 546 006 0.800
63 50 16 3100 0161 546 007 1.460
75 65 16 5000 0161 546 008 4.900
90 80 16 7000 0161 546 009 7.400
110 100 16 11000 0161 546 010 11.600
d D H H1 L L1 L2 L4 L5 L6 z Closet
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Inch
16 50 57 27 92 77 56 25 32 45 64 3/
8
20 50 57 27 95 77 56 25 32 45 64 ½
25 58 67 30 110 97 65 25 39 48 72 ¾
32 58 73 36 123 97 71 25 39 48 79 1
40 84 90 44 146 128 85 45 54 74 94 1¼
50 97 97 51 157 128 89 45 54 74 95 1½
63 124 116 64 183 152 101 45 66 87 107 2
75 166 149 85 233 270 136 70 64 206 144 2½
90 200 161 105 254 270 141 70 64 206 151 3
110 238 178 123 301 320 164 120 64 256 174 4
23
Ball Valves
Ball Valves
Ball valve coloro type 355-PVC-U
With solvent cement socket metric
George Fischer + G.F. + Made
Model:
Lever blue
Ball seal HD-PE/lubricant compound
Monoblock structure
Actuator unit not connectable
d DN EPDM z D L L1 L2 H Closet
PN kg
(mm) (mm) Code (mm) (mm) (mm) (mm) (mm) (mm) Inch
20 15 16 0161 355 002 0.130 60 49 92 78 54 51 ½
24
Butterfly Valves
Butterfly Valves
Model:
Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
Overall length according to EN 558, ISO 5752.
We recommend for the dimensions DN250 and DN300 only 6 bar maximum
system pressure for the hand lever version.
kv-value
d DN EPDM
Inch PN (p=1 bar) kg
(mm) (mm) Code
(l/min)
63 50 2 10 1470 0161 567 002 1.044
75 65 2½ 10 2200 0161 567 003 1.148
90 80 3 10 3000 0161 567 004 1.315
110 100 4 10 6500 0161 567 005 1.983
140 125 5 10 11500 0161 567 006 2.554
160 150 6 10 16600 0161 567 007 3.564
225 200 8 10 39600 0161 567 008 5.541
280 250 10 10 55200 0161 567 009 12.998
315 300 12 10 80000 0161 567 010 16.757
D1 D1
d D d2 H H1 H2 H3 L L1 L2 Q1 Q1
min. max.
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm)
63 19 120.0 125.0 104 264 77 134 54 45 106 205 40
75 19 139.7 145.0 115 277 83 140 54 46 106 205 54 35
90 19 150.0 160.0 131 289 89 146 54 49 106 205 67 50
110 19 175.0 190.5 161 325 104 167 55 56 106 255 88 74
140 23 210.0 215.9 187 352 117 181 55 64 106 255 113 97
160 24 241.3 241.3 215 373 130 189 55 72 106 255 139 123
225 23 290.0 295.0 267 435 158 210 67 73 140 408 178 169
280 25 353.0 362.0 329 554 205 264 85 113 149 408 210 207
315 25 400.0 432.0 379 598 228 285 85 113 149 408 256 253
25
Cone Check valves
Model:
Spring loaded, spring made of stainless steel (1.4310)
Spring available in other materials, see spare parts
Designed for easy installation and removal
Vibration free even at high flow velocity
Flow-optimized return cone, double guided
For horizontal or vertical installation
Compact installation length, same as ball valve type 546
Z-length, end connectors and union nuts not compatible with type 360
kv-value
d DN EPDM FPM
PN (p=1 bar) kg
(mm) (mm) Code Code
(l/min)
16 10 16 190 0161 562 001 0161 562 011 0.120
20 15 16 180 0161 562 002 0161 562 012 0.130
25 20 16 380 0161 562 003 0161 562 013 0.270
32 25 16 460 0161 562 004 0161 562 014 0.290
40 32 16 850 0161 562 005 0161 562 015 0.510
50 40 16 1080 0161 562 006 0161 562 016 0.750
63 50 16 1670 0161 562 007 0161 562 017 1.340
75 65 16 2950 0161 562 008 0161 562 018 3.170
90 80 16 3600 0161 562 009 0161 562 019 5.060
110 100 16 4150 0161 562 010 0161 562 020 8.170
d D D1 L2 z Closet
(mm) (mm) (mm) (mm) (mm) Inch
16 50 92 56 64 3
/8
20 50 95 56 64 ½
25 58 110 65 72 ¾
32 68 123 71 79 1
40 84 146 85 94 1¼
50 97 157 89 95 1½
63 124 183 101 107 2
75 166 233 136 144 2½
90 200 254 141 151 3
110 238 301 164 174 4
AVAILABLE ON REQUEST
26
Diaphragm valves new generation
Diaphragm valves new generation
Diaphragm valve type 514 PVC-U
With solvent cement sockets metric
George Fischer + G.F. + Made
Model:
Double flow rate compared to predecessor
One housing nut replaces four screws
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length
Option:
Individual configuration of the valve (see diagram)
Self-adjusting multifunctional module with integrated limit switches
PN 16 available as a configuration
kv-value
d DN NBR EPDM PTFE/EPDM FPM
PN (p=1 bar)
(mm) (mm) Code Code Code Code
(l/min)
16 10 10 125 0161 514 001 0161 514 011 0161 514 031 0161 514 061
20 15 10 125 0161 514 002 0161 514 012 0161 514 032 0161 514 062
25 20 10 271 0161 514 003 0161 514 013 0161 514 033 0161 514 063
32 25 10 481 0161 514 004 0161 514 014 0161 514 034 0161 514 064
40 32 10 759 0161 514 005 0161 514 015 0161 514 035 0161 514 065
50 40 10 1263 0161 514 006 0161 514 016 0161 514 036 0161 514 066
63 50 10 1728 0161 514 007 0161 514 017 0161 514 037 0161 514 067
kv-value
d DN PTFE/FPM
PN (p=1 bar) kg
(mm) (mm) Code
(l/min)
16 10 10 125 0800 047 300 0.420
20 15 10 125 0800 047 301 0.420
25 20 10 271 0800 047 303 0.560
32 25 10 481 0800 047 304 1.210
40 32 10 759 0800 047 306 1.540
50 40 10 1263 0800 047 308 2.680
63 50 10 1728 0800 047 309 2.581
Lift =
d D D2 D3 L L2 H H1 H2 M z Closet
Hx
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Inch
(mm)
16 65 65 43 170 25 73 14 12 M6 142 7 3/8
20 65 65 43 128 25 73 14 12 M6 96 7 ½
25 80 65 51 152 25 81 18 12 M6 114 10 ¾
32 88 87 58 166 25 107 22 12 M6 122 13 1
40 101 87 72 192 45 115 26 15 M8 140 15 1¼
50 117 135 83 222 45 148 32 15 M8 160 19 1½
63 144 135 100 266 45 166 39 15 M8 190 25 2
AVAILABLE ON REQUEST
27
Branch and Tapping Saddles
The “APLACO” saddles are designed for fitting to under pressure and dry mains uPVC
(Polyvinyl Chloride) pipes.
Saddles are available for jointing to PVC mains by mechanical jointing with a rubber seal.
The blanking cap is sealed by an “O” Ring.
For under pressure tapping, the tapping saddles are supplied with an integral brass cutter.
The maximum pipe wall thickness which can tapped in 12mm.
For tapping dry mains, a simple tapping tool is available in connection with a tapping
saddles.
28
Branch and Tapping Saddles
Saddles
Repair Saddles
For PVC Pipes
For repair of damaged pipes
Saddle` halves can be solvent cemented.
Connected only possible on dry mains without pressure
Branch Saddles
For PVC mains
Top Saddle with rubber seal
Outlet with solvent cement socket
Seal NBR (Nitrile Rubber) Shore hardness 60+5 shore A.
Quantities
d d1 Code No. d2 L Kg
Box Pallet
63 40 3161.111.035 21 105 0.610 14 504
63 50 3161.111.036 21 105 0.630 14 504
75 50 3161.111.046 30 105 0.700 12 432
90 32 3161.111.054 30 105 0.705 8 -
90 40 3161.111.055 30 105 0.710 10 360
90 50 3161.111.056 30 105 0.730 10 360
110 25 3161.111.063 21 105 0.800 10 360
110 40 3161.111.065 30 105 0.820 8 285
110 50 3161.111.066 39 105 0.830 8 288
110 63 3161.111.067 39 105 0.870 6 216
160 40 3161.111.095 30 120 1.210 6 216
160 50 3161.111.096 39 120 1.240 6 216
160 63 3161.111.097 39 120 1.280 6 216
225 1) 50 3161.111.116 39 120 1.510 9 162
225 1)
63 3161.111.117 39 120 1.560 4 162
29
Branch and Tapping Saddles
Branch Saddles
For PVC mains Pipes
Top Saddle with rubber seal
Outlet with parallel female pipe thread
Tapping Quantities
d Rp Code No. Kg
Box Pallet
63 ½" 316.1111.359 21 0.652 -- --
63 ¾" 316.1111.360 21 0.665 -- --
63 1" 316.1111.361 21 0.670 -- --
63 1 ¼" 316.1111.362 21 0.730 -- --
75 ½" 316.1111.365 21 0.764 -- --
75 ¾" 316.1111.366 21 0.780 -- --
75 1" 316.1111.367 30 0.820 -- --
90 ½" 316.1111.369 21 0.762 10 360
90 ¾" 316.1111.370 21 0.766 8 288
90 1" 316.1111.371 21 0.770 8 288
90 1 ¼" 316.1111.372 30 0.830 8 288
90 1 ½" 316.1111.373 30 0.910 -- --
110 ½" 316.1111.374 21 0.847 8 288
110 ¾" 316.1111.375 21 0.891 8 288
110 1" 316.1111.376 21 0.880 8 288
110 1 ¼" 316.1111.377 30 0.930 8 288
110 1 ½" 316.1111.378 39 1.020 6 216
110 2" 316.1111.379 -- -- -- --
160 ½" 316.1111.384 21 1.279 12 216
160 ¾" 316.1111.385 21 1.285 12 216
160 1" 316.1111.386 21 1.270 10 180
160 1 ¼" 316.1111.387 30 1.840 10 180
160 1 ½" 316.1111.388 39 1.430 10 180
160 2" 316.1111.395 39 1.550 8 126
225 1) ½" 316.1111.389 21 1.667 -- --
225 1) ¾" 316.1111.390 21 1.670 7 126
225 1) 1" 316.1111.391 21 1.684 10 120
225 1) 1 ¼" 316.1111.392 30 1.610 6 108
225 1) 1 ½" 316.1111.393 39 0.710 6 108
30
Branch and Tapping Saddles
Tapping
d dt Code No. Kg
Max.
63 20 3161.115.407 21 0.885
63 25 3161.115.408 21 0.880
63 32 3161.115.409 30 1.030
63 40 3161.115.410 30 1.050
75 32 3161.115.415 30 1.110
75 40 3161.115.416 30 1.140
90 20 3161.115.420 21 0.995
90 25 3161.115.421 21 0.990
90 32 3161.115.422 30 1.140
90 40 3161.115.423 30 1.170
110 20 3161.115.428 21 1.100
110 25 3161.115.429 21 1.110
110 32 3161.115.430 30 1.240
110 40 3161.115.431 30 1.270
110 50 3161.115.432 39 1.590
110 63 3161.115.433 39 1.650
160 25 3161.115.453 -- --
160 32 3161.115.454 30 1.660
160 40 3161.115.455 30 1.690
160 50 3161.115.456 39 2.010
160 63 3161.115.457 39 2.070
225 1) 32 3161.115.470 30 1.920
225 1) 40 3161.115.471 30 1.2950
225 1) 50 3161.115.472 39 2.280
225 1) 63 3161.115.473 39 2.350
31
Tapping Saddles with Integral Cutter with Female Thread
Tapping
d dr PVP Code No. Gr
Max
32
Push Fit Fittings
General Information
Piping represents the largest part of the investment cost and upkeep of
water distribution system. Today, therefore, the key features required for buried
water distribution systems are ease of installation, low maintenance cost and
long service life.
The Aplaco push fit range of fittings manufactured according to the most
up-do-date injection moulding technique are being widely used both for buried
drinking water pipelines as well as pipelines for general purpose and
pressurized waste water systems.
The advantages of these fittings are their light weight which facilitates
transport and storage, and the very simple and quick installation method (push
jointing principles).
33
Push Fit Fittings
Tees 90o Equal
Quantities
d1 – d2 – d1 PN Code No. Kg
Box Pallet
63-63-63 16 1721.207.611 0.756 10 180
75-75-75 16 1721.207.612 1.210 6 108
90-90-90 16 1721.207.613 1.935 6 72
110-110-110 16 1721.207.614 3.165 12 48
160-160-160 16 1721.207.617 6.926 5 20
d1 – d2 – d1 PN Code No. Kg
34
Push Fit Fittings
Reducers
Quantities
d1 – d2 DN PN Code No. Kg
Box Pallet
75-63 65-50 16 1721.927.664 0.390 10 360
90-63 80-50 16 1721.927.671 0.494 19 342
110-63 100-50 16 1721.927.674 0.685 14 252
110-90 100-80 16 1721.927.676 1.147 8 144
160-63 150-50 16 1721.927.693 1.587 6 72
160-90 150-80 16 1721.927.691 2.063 3 54
160-110 150-10 0 16 1721.927.690 2.040 3 54
225-160* 200-15 0 10 3121.927.696 -- -- --
d PN Code No.
63 16 3121.797.611
75 16 3121.797.612
90 16 3121.797.613
110 16 3121.797.614
160 16 3121.797.617
225 10 3121.797.620
35
ACCESSORIES
ACCESSORIES
36
+GF+
GEORG FISCHER +GF+ PLASTIC PIPING SYSTEM FOR
INDUSTRIAL APPLICATION AND BUILDING TECHNOLOGY
All plastic piping components ( PVC-U, PVC-C, PB, PP, PVDF, ABS ) for various
applications and +GF+ SIGNET Measurement & Control instruments , manufactured by
GEORG FISCHER +GF, are available through APLACO .
+GF+ SIGNET MEASUREMENT & CONTROL +GF+ PLASTIC PIPE FITTINGS, VALVES &
INSTRUMENTS: ACTUATION, MACHINES & TOOLS :
37
HDPE PIPING SYSTEM
FOR WATER AND GAS DISTRIBUTION
Complete range of High Density Polyethylene ( PE 100 ) pipes fittings , fusion machines &
tools , manufactured by EUROSTANDARD - ITALY are readily available in APLACO stock.
38
Technical information
39
Technical information
Joint Preparation :
resistance to mechanical abuse than steel, it
requires somewhat more care in handling. 1. Cutting: Pipe must be squarely cut to
Pulling a length of pipe off a truck bed and allow for the proper interfacing of the pipe
letting the free end plummet to the ground end and the fitting socket bottom. This can be
accomplished with a miter box saw or wheel
should be avoided. Also to be avoided is
type cutter.
dragging the pipe over rough ground,
dropping heavy objects on it, or using any
kind of chains. The resulting scratches, splits
or gouges can reduce the pressure rating.
41
Technical information
will be possible to fully insert dry pipe to the part of the solvent cementing process is to
bottom of the fitting socket. When this make sure the cement is well mixed.
happens, a sufficient quantity of cement must Periodically cover the container and shake
be applied to the joint to fill the gap between the cement to make sure it stays mixed and
the pipe and fitting. The gap must be filled to uniform. Apply the solvent cement evenly and
obtain a strong, leak free joint. quickly around the outside of the pipe and at
a width a little greater than the depth of the
fitting socket while the primer is still wet.
Apply a lighter coat of cement evenly around
the inside of the fitting socket. Apply a
second coat of cementing to the pipe end.
squarely insert the pipe into the fitting socket, The drying period of the cement before
giving the pipe or fitting a ¼ turn during application of the test or working pressure
insertion to evenly distribute the cement. Do depends on the drying temperature, the
not continue to rotate the pipe after it has hit
dimension and the fit conditions.
the bottom of the fitting socket. A good joint
will have sufficient cement to form a uniform
As a general rule, Waiting time after last
bead all the way around the outside of the
cementing until test for sizes up to 225
fitting hub. The fitting will have a tendency to
mm is
slide back on the pipe while the cement is
15 hours if the test pressure is 15 bar
setting, so hold the joint tightly together for
24 hours if the test pressure is 21 bar
about 30 seconds.
43
Technical information
3. Clean the profile ring , the inside of Assembly Instructions for PVC-U Tapping
Saddles :
the socket and the groove for the ring.
1 . Jointing of the Saddle to the Main. Top
saddle mechanically jointed
Dry Tapping
Service Connection
d ( mm ) 16 to 32 40 to 63
mm mm
L ( cm ) 70 cm 63 cm
Fig 1
44
Technical information
The support block should be placed between Pressure test the saddle and the service
pipe before tapping the main. It is
the flexible section and the main, close to the
recommended that pressure be applied from
elbow or bend. Fig (2).
the consumer side of the branch
Fig 3
3. Pressure Testing.
45
Technical information
4. Unscrew cutter until it is level with the top the internal pressure load capacity, derived
edge of the tapping saddle. The hexagon from the pipe wall thickness.
key prevents the pipeline medium from As a general rule,
Test pressure = 1.3 x PN ( Nominal Pressure )
overflowing as the outlet is passed. The i.e.
cutter is intended to be used once only. It For PN 10 : maximum test pressure is 13 bar
For PN 16 : maximum test pressure is 21 bar
must not be removed. The disc cut out of
the pipe and the shavings are retained Supplement 2 of DVS 2210-1 forms the basis for
securely in the cutter. the following information. This replaces the data in
If necessary, an emergency shut off DVS 2210- 1 entirely. The modifications became
grease, oil, thread sealing paste, etc.). relation to SDR and the pipe wall
the stop. Do not use a wrench. To make things easier, the permissible test
pressures can be taken directly from the
following diagrams.
Definitions:
P = permissible test pressure in bar
T = pipe wall temperature in °C
46