Professional Documents
Culture Documents
L3370-07-3/04
TECHNICAL DATA
Standard
QC® #1
Assembly
Specifications
Maximum Maximum Minimum Pulley Mounting Wear Wear Volume
Belt Speed Service Temp. Diameter Distance Life* (per inch of blade)
fpm (m/sec) F (C) in. (mm) in. (mm) in. (mm) in3 (cm3)
Standard 700 (3.6) 12 (305) 3.0 (76)** 4.0 (100) 3.30 (54)
150° (65°) Continuous
Heavy-Duty 850 (4.3) 12 (305) 4.0 (100)*** 4.0 (100) 4.99 (82)
180° (82°) Intermittent
* Amount of usuable blade. *** (pulley dia. 20 in. and above [508 High-performance urethanes are available;
mm or greater]) For pulley dia. less see your Martin Engineering representative
** (pulley dia.12 in. and above [300 mm than 20 in., contact your Martin for assistance in specifying nonstandard
or greater]) Engineering Representative. products. Refer to Form No. L3375.
Nomenclature
SLITS/SEGMENTS URETHANE COLOR TENSIONER
11 for no slits or segments 10 for segments only BR for Brown GR for Green T for MARTIN® TWIST™ Tensioner
01 for slits only 00 for slits & segments NB for Navy Blue CL for Clear I for MARTIN® Internal Spring Ten.
Blank for Orange
Technical Data
Standard Heavy-Duty
QC® #1 Pre-Cleaner QC® #1 Pre-Cleaner
Belt Mainframe Belt Shipping Belt Coverage Shipping Belt Coverage Shipping
Width Length Coverage Weight Weight
Belt Width Less 6” Belt Width less 2” Weight
in. (mm) in. (mm) in. (mm) lb. (kg) in. (mm) lb. (kg) in. (mm) lb. (kg)
B A A A
18 (400-500) 44 (1118) 16 (406) 32 (14.5) 12 (305) 46 (22) 16 (406) 49 (22)
24 (500-650) 50 (1270) 22 (559) 37 (16.8) 18 (457) 53 (24) 22 (559) 56 (25)
30 (650-800) 62 (1575) 28 (711) 41 (18.6) 24 (610) 60 (27) 28 (711) 63 (29)
36 (800-1000) 68 (1727) 34 (864) 46 (20.9) 30 (762) 67 (30) 34 (864) 70 (32)
42 (1000-1200) 74 (1880) 40 (1016) 53 (24.0) 36 (914) 74 (34) 40 (1016) 77 (35)
48 (1200-1400) 80 (2032) 46 (1168) 58 (26.3) 42 (1067) 80 (36) 46 (1168) 83 (38)
54 (1400-1600) 86 (2184) 52 (1321) 63 (28.6) 48 (1219) 87 (39) 52 (1321) 90 (41)
60 (1600-1800) 98 (2489) 58 (1473) 69 (31.3) 54 (1372) 94 (43) 58 (1473) 97 (44)
72 (1800-2000) 110 (2794) 70 (1778) 81 (36.7) 66 (1676) 101 (46) 70 (1778) 104 (47)
84 (2000-2200) 123 (3124) 82 (2083) 93 (42.2) 78 (1981) 115 (52) 82 (2083) 118 (54)
96 (2200-2400) 135 (3429) 94 (2388) 105 (47.6) 90 (2286) 129 (59) 94 (2388) 132 (60)
Standard Heavy-Duty
QC® #1 Pre-Cleaner QC® #1 Blade QC® #1 Blade
*Note: The Heavy-Duty QC® #1 Blade (P/N 35381-XXXX) will NOT fit into
frame locations for Medium-Duty QC® #1 Cleaner Assembly (P/N 33497-
XXX). The blade will fit on the mainframe, but the mainframe will need to be
relocated for proper cleaning and effective wear life.
Note: Shape of mainframe and
blade indicates blade type.
Trademarks listed above under “Cleaner” are the property of the manufacturer of the
respective equipment and are not affiliated with Martin Engineering.