Professional Documents
Culture Documents
9
NUFLO Measurement Technology: 2-in-Wafer Gas Turbine Flowmeter
Dimensions
Dimensions, in [mm]
A B C D
1-in NPT
3.32 [84] 3.60 [91] 3.12 [79] 1.80 [46]
C
A
Order Numbers
11
NUFLO Measurement Technology: 2-in-Wafer Gas Turbine Flowmeter
Gas Meter Flow Rate
High
34,722.2 50,000
on 100% methane gas
at 0.6 specific gravity. 566,400
566,400 13,888.9 20,000
Standard
13,888.9 20,000
To determine the
283,200
283,200 6,944.4
6,944.4 10,000
10,000
minimum capacity
for other gases use: 141,600
141,600 3,472.2
3,472.2 5,000
5000
Low
G 1,388.9 2000
where 28,320
28,320 694.4
694.4 1,000
1000
1,4161416 34.7
34.7 5050
566.4566.4 13.9
13.9 2020
High range
Standard range 283.2283.2 6.9
6.9 1010
Low range
141.6141.6 3.5
3.5 5 5
56.656.6 1.4
1.4 2 2
28.328.3 0.7
0.7 1 1
11 22 55 10
10 20
20 50
50 100
100 200
200 500
500 1,000
1000 2,000
2000
(6.9) (13.8) (34.5) (69) (138) (345) (690) (1380) (3450) (6900) (13800)
[0.007] [0.01] [0.03] [0.07] [0.14] [0.35] [0.69] [1.38] [3.45] [6.9] [13.8]
FLOWING PRESSURE - PSIG (kPa)
Flowing gauge pressure, psi [MPa]
Flow rates are at standard conditions of 14.73 psia and 60° F
and are based on 100% methane gas @ 0.6 s.g. Gas meter flow ranges. High Range
Standard Range
To determine the minimum capacity for other gases use:
1.8 in Low Range
Q (g) = Q (0.6)
0.6
G where:
[3.2 mm]
Gasket Gasket For greater accuracy and additional
Q (0.6) = flow rate on graph performance information, use Cameron's
G = specific gravity of other gas SizeGas program, available for download from
Q (g) = flow rate for other gas the Cameron (Measurement Systems) website.
Temperature well
Inlet
Flow
conditioner
5 nominal pipe diameters Centering ring
(2-in diameter pipe) Gas turbine meter
Centering ring Pressure tap
12