This document contains a table listing 10 instances of rework needed on various machines and customers. It includes details such as the machine, customer, thickness measurements of top and bottom sheets, type of issue, and reason for rework. Common issues included bad spots, rework needed on spots, and material or clamping problems. This table provides a record of quality issues across multiple machines and customers that required rework to be performed.
This document contains a table listing 10 instances of rework needed on various machines and customers. It includes details such as the machine, customer, thickness measurements of top and bottom sheets, type of issue, and reason for rework. Common issues included bad spots, rework needed on spots, and material or clamping problems. This table provides a record of quality issues across multiple machines and customers that required rework to be performed.
This document contains a table listing 10 instances of rework needed on various machines and customers. It includes details such as the machine, customer, thickness measurements of top and bottom sheets, type of issue, and reason for rework. Common issues included bad spots, rework needed on spots, and material or clamping problems. This table provides a record of quality issues across multiple machines and customers that required rework to be performed.
No Details Of Rework Machine Customer Thickness Top Bottom Thickness
1 Outer Banana filling not OK OM-07 CHILLER 1.2 1.2 2 Rework on spots OM-10 Chaddha 0.7 2 3 Bad Spot OM-07 SERAP 0.8 2 4 Bad Spot OM-10 IDMC 0.8 2 5 Bad Spot OM-07 IDMC 10KL 0.8 2 6 Weak Filling OM-07 SERAP 0.8 2 7 Bad Spot OM-07 SERAP 0.8 2 8 Rework on spots OM-10 ALFA 1.2 5 9 Rework on spots OM-11 ALFA 1.2 4 10 Rework OM-07 CHILLER 1 1 Type Reason DE Clamp Tighter more and not at right angle. SE Severe Dents in Top Sheet SE Material Not Ok SE Material Not Ok SE Bow Issue SE Bow Issue SE Clamp Issue SE Waviness in Bottom Sheet SE Dent in Bottom Sheet DE Bow Issue