Professional Documents
Culture Documents
Certification Test Study Guide Scaffold
Certification Test Study Guide Scaffold
TABLE OF CONTENTS
Test Durations
Part 1 requires the candidate to answer questions, without the aid of any
reference material, on
• Procedures for special hazards associated with high winds, work over
water, hot surfaces and unstable structures (S-I, S-IIT & S-IIS)
• Safe clearances between scaffolds and power lines and excavations (S-I,
S-IIT, S-IIS & S)
• Acceptable post (standard) spacing for light- and medium-duty tube and
coupler (S-I, S-IIT & INSP.), system (S-I, S-IIS & INSP.), underhung (S-I,
S-IIT & INSP.), and bracket scaffolds (S-I & INSP.)
Test Durations
The duration of the written tests will be
Supervisor I – 2 hours
Supervisors II-T, II-S, and Inspector 1 1/2 hours
Twenty (20) minutes will be allowed for the inspection and documentation of
each of the scaffold constructions.
For any further information, contact the Program Supervisor of your area
Job Skills Training Division.
PHONE #
Northern Area:
Supervisor, Metals Skills Training 673-1680
Southern Area:
Supervisor, Metals Skills Training 577-1038
Riyadh Area:
Supervisor, Maintenance Skills Unit 285-2536
Yanbu Area:
Supervisor, Yanbu Metals /
Mechanical Unit 397-8171
Jeddah/Rabigh Area:
Supervisor, Rabigh Jobs Skills Training Unit 425-1381
SCAFFOLDING CERTIFICATION
SUPERVISOR II-T
BASES (SILLS, BASE PLATES ETC)
Description of fault(s) Required corrective action(s)
None
POSTS (STANDARDS)
Description of fault(s) Required corrective action(s)
None
RUNNERS (LEDGERS)
Description of fault(s) Required corrective action(s)
BEARERS (TRANSOMS)
Description of fault(s) Required corrective action(s)
None
BRACING
Description of fault(s) Required corrective action(s)
Replace bracing to the full height
Bracing not installed to full height of the scaffold on all four sides
of the scaffold
OUTRIGGERS AND TIES
Description of fault(s) Required corrective action(s)
None
GUARDRAILS
Description of fault(s) Required corrective action(s)
Remove guardrail and reinstall at
Guardrail installed at a height of
correct height min 38” max
30”
45”