Professional Documents
Culture Documents
Working at Heights Checklist-TCN
Working at Heights Checklist-TCN
□ Erection of toe boards, infill, mesh guards, etc on all edge protection
□ Erection of containment sheeting on work platforms and scaffolds
□ Erection of overhead protection
□ Establishment of an exlusion zone below the work area via barricades and signs
□ Fragile and wet surfaces/rooftops
□ Other :
Harnesses, Lanyards and associated equipment
Webbing □ No cuts or tears □ No abrasion damage
□ No damage due to contact with heat, oils or □ No deterioration due to rotting, mildew or UV exposure
chemicals
Snap Hooks and Carabiners □ No distorsion of hook or latch □ Free from dirt or other obstructions
□ No cracks or wear at swivels and latch points □ No free movement of latch over its full travel
□ No distortion or other physical damage of □ No excessive losss of cross section due to wear
the D-ring
□ No foreign bodies such as small stones □ Correct use labels and service label/tag is present and
within the body (to be checked without legible
dismantling)