Professional Documents
Culture Documents
Date: 3-Aug-17 Mechanical Calculation For Flat Head of Vessel LP-CS-001 Rev.: A
Date: 3-Aug-17 Mechanical Calculation For Flat Head of Vessel LP-CS-001 Rev.: A
PROJECT:
Dimension input
1. Data for Shell
3754.000 ← d: Inside diameter of shell (mm)
24.000 ← ts: Thickness of shell (mm)
2.Material of shell
A36 ← Head material
114.000 ← S1: Maximum allowable stress value at Atm °C of head (Mpa)
3.Material head
EH-36 ← Head material
187.000 ← S2: Maximum allowable stress value at Atm °C of head (Mpa)
Calculation
a. Thickness required of head
𝐶∗𝑃
𝑡=𝑑
𝑆2 ∗ 𝐸2
Where:
Pressure design internal: P = 0.750 (Mpa)