Professional Documents
Culture Documents
If bolt bound,
press " or # to
view alternate
moves.
UTILITY + COMMUNICATIONS +
HOST PC LOAD/DUMP to transfer data to and from a
PC (using UltraMgr). When downloading an
alignment job from a PC, set-up data is automatically
transferred. Review readings and notes and then
toggle “CLEAR JOB” to “YES” to clear “READINGS
& NOTES ONLY” to begin new job without deleting
set-up data.
STEP 5: Machine Moves
The MACHINE MOVES screen indicates how much Consult manual for complete instructions.
to move each foot.
Center = Excellent
1 st Ring = Acceptable
2 nd Ring = Close
Set-up: Fixtures and Analyzer Identify the Machines as appropriate. Machine Press DEL to start. Refer to the online help mes-
naming helps eliminate confusion. sages for complete soft foot process.
To set up the analyzer, press OPTIONS + Place the laser heads at the starting position and
ALIGNMENT SETUP and choose the appropriate press ENTER. The bar graph display indicates when
options. each head is ready for measurement.