You are on page 1of 1

MOM HELD BETTWEEN FLOWDYNE ENTERPRISES AND FRICK INDIA LTD.

AT
FLOWDYNE WORKS ,VASAI.

Mr.Bilal Saifee Mr.Arun Kumar

Flowdyne Enterprises Frick India Ltd.

Following points were observed during inspection of Ammonia Pumps Sr .No.2299


& 2300 Vide Po No.: PO/19-20/12158, item no :Pump3667 .

1. Material Test report will be sent to Frick India Ltd. of following parts
a) Bearing Housing
b) Casing and impeller
c) Circle and Rod
d) Stator and Rotor Can .
2. Winding tests was conducted and all the parameters were found
satisfactory.
3. Hydrotest for complete assembly was conducted and no leak was found
from casting and sealing area.
4. Performance test was conducted and all the required parameters were
reviewed and found ok.
5. Strip down test conducted after running of pump no wear was observed on
any parts.
6. Internal QAP Reviewed by FIL.

FOR FLOWDYNE ENTERPRISES FOR Frick India Ltd.


Bilal Saifee Mr.Arun Kumar

You might also like