Professional Documents
Culture Documents
WARNING: Manually installing the firmware will erase all saved data, content
and settings on your MINIX NEO X8-H Plus.
2. After that, run this software. The user interface shall be the same as the
following picture.
4. Then attach the power adapter to the NEO X8-H Plus, and connect NEO X8-H
Plus to the Windows PC via an OTG cable that come with the box.
5. To flash the MINIX NEO X8-H Plus firmware, the power button should be held
down for more than 6 seconds for the ‘Burning Tool’ to recognize that the NEO
X8-H Plus is connected.
7. Then re-plug in the power adapter and press power button to start the NEO X8-
H Plus. It will take a little while to boot after flashing.