Professional Documents
Culture Documents
MINIX NEO U1 - Firmware Installation Instructions PDF
MINIX NEO U1 - Firmware Installation Instructions PDF
WARNING: Manually installing the firmware will erase all saved data, content
and settings on your MINIX NEO U1.
2. After that, run this software. The user interface shall be the same as the
following picture.
4. Then attach the power adapter to the NEO U1, and connect NEO U1 to the
Windows PC via an OTG cable that come with the box.
5. To flash the MINIX NEO U1 firmware, the power button should be held down for
more than 6 seconds for the ‘Burning Tool’ to recognize that the NEO U1 is
connected.
7. Then re-plug in the power adapter and press power button to start the NEO U1.
It will take a little while to boot after flashing.