This document provides allowable pile capacities based on CPT data for 3 boreholes at a construction site in Jakarta Timur, Indonesia. Pile capacities are provided for pile sizes of 25x25cm, 35x35cm, and 40x40cm. Safety factors of 5.0 for friction and 3.0 for end bearing are used. Allowable tension capacities range from 0.00 to 13.78 tons for 25x25cm piles depending on depth, and allowable compression capacities range from 0.00 to 149.27 tons. Piles of size 25x25cm with a length of 6-7 meters are recommended, with an allowable tension capacity of 10 tons and compression capacity of 40 tons
This document provides allowable pile capacities based on CPT data for 3 boreholes at a construction site in Jakarta Timur, Indonesia. Pile capacities are provided for pile sizes of 25x25cm, 35x35cm, and 40x40cm. Safety factors of 5.0 for friction and 3.0 for end bearing are used. Allowable tension capacities range from 0.00 to 13.78 tons for 25x25cm piles depending on depth, and allowable compression capacities range from 0.00 to 149.27 tons. Piles of size 25x25cm with a length of 6-7 meters are recommended, with an allowable tension capacity of 10 tons and compression capacity of 40 tons
This document provides allowable pile capacities based on CPT data for 3 boreholes at a construction site in Jakarta Timur, Indonesia. Pile capacities are provided for pile sizes of 25x25cm, 35x35cm, and 40x40cm. Safety factors of 5.0 for friction and 3.0 for end bearing are used. Allowable tension capacities range from 0.00 to 13.78 tons for 25x25cm piles depending on depth, and allowable compression capacities range from 0.00 to 149.27 tons. Piles of size 25x25cm with a length of 6-7 meters are recommended, with an allowable tension capacity of 10 tons and compression capacity of 40 tons