Professional Documents
Culture Documents
08 Intersection Curves PDF
08 Intersection Curves PDF
MT10043 – NX 9.0
2. Use the Part Navigator to become familiar with the existing geometry.
3. In the Set 2 group, click Select Face and select the top planar face.
4. In the Settings group, ensure that the Associative check box is selected.
5. Click OK.
The associative intersection curve is created between the plane and the top
face.
Normal .
4. Select the existing datum plane.
5. In the Stationary Edges group, with Select Edge active, select the edge of the
newly divided face.
6. In the Angle 1 on-screen input box, type 12 and press Enter.
7. Click Apply.
8. In the Draw Direction group, from the Specify Vector list, select Face/Plane
Normal .
9. With Specify Vector (1) active, select the existing datum plane.
10. Click Reverse Direction to apply draft to the opposite face.
11. Select the divided edge and click OK.
This expression defines the angle between the datum and the sketch line.
The draft feature updates with the changes made to the datum sketch angle.