Professional Documents
Culture Documents
MINITAB SEMINAR
- Construct a boxplot for both treatments (before and after). Discuss the plots.
- Is the thermal process affecting the mean length of the plastic part?
- What change in the part length could be detected by this test if we use a
confidence level of 95% and a power of 90%? Would you increase your
sample size?
Prueba Pareada
- Can we conclude that there is significant difference in the rejection rate of the
two machines?
4. Is the normal probabilistic model reasonable for the following 20 observations? If,
so, estimate the probability of having a random observation between 20 and 28.
27.29 24.78 24.01 24.26 27.51 25.72 24.51 26.51 27.07 23.41
25.76 26.43 20.84 22.65 27.93 24.16 24.57 22.85 21.66 24.21
5. Four laboratories are being used to perform chemical analyses. Samples of the
same material are sent to the laboratories for analysis as part of the study to
determine whether or not the give on the average the same results. The analytical
results for the four laboratories are as follows:
Laboratory
A B C D
58.7 62.7 55.9 60.7
61.4 64.5 56.1 60.3
60.9 63.1 57.3 60.9
59.1 59.2 55.2 61.4
58.2 60.3 58.1 62.3