Professional Documents
Culture Documents
1- Model Paper-2
6 Question
1. All things contain imperfections, but is only when they fall outside the level of acceptance they should
be termed?
A. Discontinuity
B. Defect
C. Mechanical damage
D. Welding imperfections
2. A singular gas filled cavity that is= or more than 1.6 mm in diameter is termed?
A. Cavity
B. Cluster porosity
C. Blow hole
D. Rounded porosity
D. Incorrect set up
B. Spatter that is more than 2 mm need not be cleaned for visual inspection
D. Spatter will not have any affect on the weld or the base material