Professional Documents
Culture Documents
Data Sheet
ASMi-54
SHDSL.bis Modem
Rail-mount
Metal Metal
Enclosure Enclosure
Plastic
Enclosure
High-end SHDSL.bis
multiservice access • SHDSL.bis managed modem operating at full-duplex data rates of up to
5.7 Mbps per copper pair
equipment • Ethernet service over 8-wire line of up to 22.8 Mbps in Point-to-Point,
Multipoint, Daisy Chain and Ring topologies
• Two platforms for Ethernet encapsulation with up to 22 Mbps throughput over
8-wire lines: HDLC and SHDSL EFM bonding (in Point-to-Point topology)
• Optional 4xE1 service in addition to HDLC encapsulated Ethernet in Multipoint,
Daisy Chain and Ring topologies
ASMi-54
SHDSL.bis Modem
Airmux Airmux
ETH ETH
SHDSL SHDSL FO SHDSL
VLAN tagging can also be employed to The following security protocols are • Redundant AC/DC wide-range power
separate traffic, ensuring transparency of provided by ASMi-54 to ensure client supply configuration in a 1U-high
the customer traffic and bolstering security server communication privacy and correct 19-inch metal enclosure (Ring and
of management traffic. The user can user authentication: Daisy-chain topology only)
activate or deactivate the priority • Access control for SNMPv3, Telnet and • 24 VDC
mechanism, and each priority (VLAN Web-based management interface for
priority, DSCP) can be configured and • Via power feeding of DC voltage over
granting access only to users that the SHDSL line (4-wire and 8-wire
mapped to one of four priority queues. appear in the manager list Ethernet versions only).
MANAGEMENT AND SECURITY • SSL/SSH for Telnet and secure Web
access PHYSICAL
The ASMi-54 unit can be managed using
the following connections: • RADIUS for password management and ASMi-54 is supplied in 1U-high plastic,
user authentication. metal (8.5- or 19-inch), or rail-mount
• Local RS-232 terminal enclosures.
Note: Refer to Table 1 for the security protocols
• Telnet server, SNMP Modems with metal and plastic enclosures
supporting options.
• Web-based management application can be mounted alone or in pairs in a
• Inband management with or without POWER 19-inch rack using RAD’s optional
dedicated VLAN. ASMi-54 is available with several power mounting kits. 8.5-inch units in metal
options: enclosure can also be mounted in an
8.5-inch rack (see Ordering).
• AC/DC wide-range (100 to 240 VAC,
-48 to -60 VDC nominal)
LAN LAN
LAN LAN
Up to 22.8 Mbps
8-wire SHDSL
ASMi-54 ASMi-54
LAN LAN
LAN LAN
ASMi-54
SHDSL.bis Modem
E1 INTERFACES
Specifications HDLC
Frame Size
2048 bytes
4 x E1 4 x E1
IP/ETH
Network
RNC 4 x BTS
8W
22.8 Mbps
ASMi-54 ASMi-54
TDM
Network
4 x ETH 4 x ETH
BSC 4 x Node B
E1
2W BTS
5.7 Mbps
ASMi-54L ETH
E1
Node B
4 x E1
IP/ETH
Network 2W BTS
5.7 Mbps
RNC ASMi-54L
ETH
E1
Node B
ASMi-54
2W
TDM BTS
5.7 Mbps
Network
ASMi-54L
4 x ETH ETH
BSC
E1
Node B
2W BTS
5.7 Mbps
ASMi-54L ETH
Node B
Figure 4. Connecting Co-located 2G/3G Base Stations using ASMi-54L Modems over Copper Lines
ASMi-54
SHDSL.bis Modem
Green (on) – Ethernet port link is up Weight: 0.6 kg (1.3 lb) Environment
Green (off) – No Ethernet link on the 8.5-inch metal enclosure: Temperature: 0° to 50°C (32° to 122°F)
port Height: 43.7 mm (1.7 in) Extended temperature (4 x ETH interface
Width: 215.5 mm (8.5 in) version only): -20° to 70°C (-4° to 158°F)
E1 LOC Depth: 153 mm (6.0 in) Humidity: Up to 90%, non-condensing
Red (on) –Loss of signal or sync loss Weight: 0.7 kg (1.5 lb)
(framed mode only), or unframed 19-inch metal enclosure:
AIS is received on the E1 port Height: 44 mm (1.7 in)
E1 REM Width: 427 mm (17.0 in)
Red (on) –Remote alarm is received on Depth: 258 mm (10.1 in)
the E1 port Weight: 4.0 kg (8.8 lb)
E1s
Central Office
Fiber
4 x E1 BTS
IP/ETH
Network Optimux-108
FE
4 x ETH 4 x E1
LRS-102
TDM Megaplex-4100
Network Copper BTS
SHDSL.bis
BSC 1 x GbE ASMi-54
n x ETH 4 x FE
n x E1
BTS Site
Node B
Airmux-400
Wireless
E1s
BTS
Airmux-400
FE
BTS Site
Node B
Figure 5. Connecting Co-located 2G/3G Base Stations using Fiber Optic, Copper and Wireless Connections
Ordering
# Ethernet interface (mandatory): % Enclosure (Default=plastic enclosure):
4ETH Four-port ETH module ME 8.5-inch metal enclosure
RECOMMENDED CONFIGURATIONS
(Default=4 x RJ-45 connectors) (For 8W/D or 8W/M options
ASMi-54/4E1/4ETH/8W ^ Extended temperature for device with only)
4 ETH interfaces (Default=0° to 50°C RAIL Rail-mount enclosure
ASMi-54/4ETH/8W/M (32° to 122°F): (For 8W with Ethernet port,
ETR -20° to 70°C (-4° to 149°F) 8W/D and 8W/M options only)
ASMi-54/4ETH/8W/D
Note: For 19-inch enclosure, see
Note 1: For 8W/M and 8W/D options ETR is
ASMi-54/4ETH/8W/D/R (19-inch metal -20° to 65°C (-4° to 149°F). Recommended configurations
enclosure with redundant AC/DC Note 2: Complies with NEBS for Ethernet
wide-range power supply) ~ One or two SFP sockets on the ETH
services in temperature range -5° to 55°C
interface (Default=4 x RJ-45
(23° to 131°F).
ASMi-54/4ETH/8W connectors, no SPF sockets)
* SHDSL interface:
8W 8-wire (For plastic enclosure 1NULL3UTP SFP socket on Port 1 +
SPECIAL CONFIGURATIONS with (4ETH + 4E1) option or UTP Ports 2, 3, 4
ASMi-54/$/@/#/^/*/%/~ metal enclosure only) 2NULL2UTP SFP sockets on Ports 1,2 +
8W/D 8-wire with daisy-chain/ring UTP Ports 3, 4
Legend capabilities (4W on each side) Note: For the 4ETH/8W/D, 4ETH/8W/M or
$ Power supply (Default= wide-range 8W/M 8-wire with multipoint 4E1/4ETH/8W options only.
AC/DC power supply): capabilities
24V Optional 24 VDC power supply Note: 8W/D and 8W/M interfaces are for
@ User interface (Default=no E1 Ethernet service only, with no EFM support.
interface):
4E1 Four E1 ports
PC PC
ASMi-54
SHDSL SHDSL
ETH
SHDSL
Fiber
Ring
ASMi-54 ASMi-54 ASMi-54
ASMi-54
PC PC
and the product names Optimux and IPmux, are registered trademarks of RAD Data Communications Ltd. All other trademarks are the property of their respective holders.
503-100-12/12 (3.54) Specifications are subject to change without prior notice. 1988–2013 RAD Data Communications Ltd. The RAD name, logo, logotype, and the terms EtherAccess, TDMoIP and TDMoIP Driven,
SUPPLIED ACCESSORIES WM-35-TYPE4
AC power cord Wall mounting kit for 8.5-inch units with
AC/DC adapter for -48 VDC metal enclosure
RM-34 CBL-DB9F-DB9M-STR
Mounting kit for installation of one Control cable
ASMi-54/4ETH/8W/D/R in a 19-inch rack
CBL-RJ45/2BNC/E1
Interface adapter for converting a
OPTIONAL ACCESSORIES
balanced E1 RJ-45 connector into a pair of
RM-33-2 BNC unbalanced coaxial connectors
Hardware kit for mounting one or two
plastic ASMi-54 units in a 19-inch rack
RM-35/@
Hardware kit for mounting one or two
8.5-inch metal ASMi-54 units in a 19-inch
rack
Legend
@ Rack mount kit (Default=both kits):
P1 Mounting one unit
P2 Mounting two units
Max. data rate 2.3/4.6 2.3/4.6 5.7/11/22 5.7/11.4 (11.4/15 per 5.7/11/22
(Mbps) pair with license key)
Interface V.35, RS-530, X.21, V.35, X.21, E1, ETH, 4 x ETH, 4 x E1 4 x ETH, E1 4 x ETH, E1
E1, ETH 4 x ETH
Router - - - -