Professional Documents
Culture Documents
2 gloria clutches
Jaden Baby Sneakers are a unique design of baby booties in the combined style of Velcro sneakers and boots. These
shoes may be worn by both girl and boy babies, and have a mischievous and playful look to them from their pleated
flaps. If you want to make these sneaker-styled booties more masculine or feminine, you may want to pick a fabric with
an unmistakably boyish or girlish pattern. Jaden Baby Sneakers have a casual look that makes it well-suited for indoor
play or day-to-day stroller wear, and are a popular item among mothers with little children. Designer’s Review
1
Cut out the Fabric
Draw the patterns directly onto the wrong side of a single layer of fabric. Because there is a right and left
shoe you will need to reverse the sole, upper boot, lining flap pattern when tracing. Make sure the right
and left pieces are separated to avoid confusion when attaching the soles. Cut out the exterior, lining, and
interfacing. Fuse the interfacing on the wrong side of the lining following the manufacturer’s guide.
EXTERIOR LINING
(2) Upper Boot Pieces (2) Upper Pieces
(2) Upper Toe Pieces (2) Upper Strap Pieces
(2) Sole Pieces (2) Sole Pieces
(1) Flap Piece (1) Flap Piece
INTERFACING
(2) Upper Pieces
(2) Upper Strap Pieces
(2) Sole Pieces
¼ ” Seam open
Picture 1 Picture 2
¼ ” Seam open
Picture 3 Picture 4
2
Assemble the Exterior and Lining Upper
Turn the assembled lining upper right side out and place the exterior upper on it with right sides together,
see Picture 5.
Picture 5 Picture 6
Picture 7 Picture 8
Picture 9 Picture 10
3
If the fabric still gathers or tugs at the corners, flip it wrong side out again and clip as needed.
Place the lining upper on the lining sole with right sides together, matching their center points. Pin the toe
and heel. Pin around the rest of the sole, clipping the heel seam as needed. Sew the sole, backstitching on
both ends and leaving a 2 ½” gap for turning, see Pictures 15-16. Clip the curved seam. Turn the shoe right
side out; pin and stitch the opening closed, see Picture 17.
Picture 12 Picture 13
Picture 14 Picture 15
Opening
Picture 16 Picture 17
4
Turn exterior side out and the result should look like Picture 18. Separate a Velcro piece and sew the soft
side onto the exterior upper of the shoe. Sew in a rectangular shape, pivoting at the corners and
backstitching on the start and end points, see Picture 19. Repeat for the other shoe.
Fold and sew the pleats on the long exterior piece, with the direction of the pleats facing upward, see
Picture 22. Sew the pleats on the opposite side with the direction of the pleats facing downward, see Picture
23.
Picture 18 Picture 19
Picture 20 Picture 21
Pleats’ direction
Pleats’ direction
Picture 22 Picture 23
5
Pin and sew the exterior and lining flap pieces with right sides together, backstitching on both ends and
leaving a gap to turn right side out, see Picture 24. Trim the corner seams, see Picture 25. Turn the flap right
side out and stitch the opening closed, see Picture 26. The result should look like Picture 27. Make the other
flap in the same manner.
Opening
Picture 24 Picture 25
Picture 26 Picture 27
Picture 28 Picture 29
6
JADEN BABY SNEAKERS
Size 1
Upper Toe JADEN BABY
Exterior fabric: Cut 2 ¼-inch seam SNEAKERS
Lining: Cut 2 allowance
Interfacing: Cut 2 included Size 1
Lin
e B eB
Lin ¼- inch seam allowance included
Exterior Fabric : Cut 2
Lining: Cut 2
Interfacing: Cut 2
Draw the pattern as
shown. Then flip it over
so it is the opposite foot
and draw it again.
JADEN BABY SNEAKERS SOLE
ro
lc
Size 1
Ve
Point A Upper Boot Point A
Exterior fabric: Cut 2
Draw the pattern Lining: Cut 2
as shown. Then Interfacing: Cut 2
flip it over, draw
it again. ¼-inch seam allowance included
Pleats
JADEN BABY SNEAKERS
Size 1
¼-inch seam allowance included
Exterior: Cut 2
Button
Flap
Velcro
Pleats
JADEN BABY SNEAKERS
Size 2
Upper Toe
Exterior fabric: Cut 2 ¼-inch seam
Lining: Cut 2 allowance included
Interfacing: Cut 2
Lin
eB e B
Lin
JADEN BABY SNEAKERS
ro
lc
Ve
Size 2
Point A Upper Boot Point A
Draw the pattern as shown. Exterior fabric: Cut 2
Then flip it over so it is the Lining: Cut 2
opposite foot and draw it Interfacing: Cut 2
again.
¼-inch seam allowance included
Pleats
JADEN BABY SNEAKERS
Size 2
¼-inch seam allowance included
Exterior: Cut 2
Button
JADEN BABY SNEAKERS Flap
Velcro
Size 2
Button Lining Flap
Draw the pattern ¼-inch seam allowance
as shown. Then flip included
it over so it is the
opposite foot and Lining: Cut 2
draw it again.
Pleats
JADEN BABY SNEAKERS
Size 3
Upper Toe
Exterior fabric: Cut 2
¼-inch seam Lining: Cut 2
allowance Interfacing: Cut 2
included
Lin
e B e B
Lin
ro
JADEN BABY SNEAKERS
lc
Ve
Size 3
Point A Point A
Upper Boot
Draw the pattern as shown. Exterior fabric: Cut 2
Then flip it over so it is the Lining: Cut 2
opposite foot and draw it Interfacing: Cut 2
again.
¼-inch seam allowance included
Pleats
JADEN BABY SNEAKERS
Size 3
Flap
¼-inch seam allowance included
Exterior: Cut 2
Button
Velcro
Pleats
JADEN BABY SNEAKERS
Size 4
Upper Toe
Exterior fabric: Cut 2
¼-inch seam
Lining: Cut 2
allowance included
Interfacing: Cut 2
Lin
B e B
e
Lin
JADEN BABY SNEAKERS
ro
ro
lc Size 4
lc
Ve
Ve
Point A Upper Boot Point A
Exterior fabric: Cut 2
Draw the pattern as shown. Lining: Cut 2
Then flip it over so it is the Interfacing: Cut 2
opposite foot and draw it ¼-inch seam allowance included
again.
Pleats
JADEN BABY SNEAKERS
Size 4
Flap
Exterior: Cut 2
¼-inch seam allowance included
Button
Velcro
Pleats
JADEN BABY SNEAKERS
Size 5
¼-inch seam
Upper Toe allowance included
Exterior fabric: Cut 2
Lining: Cut 2
Interfacing: Cut 2
Lin
B e B
e
Lin
JADEN BABY SNEAKERS
ro
lc
Ve
Size 5
Point A Upper Boot Point A
Exterior fabric: Cut 2
Draw the pattern as shown. Lining: Cut 2
Then flip it over so it is the Interfacing: Cut 2
opposite foot and draw it
again.
¼-inch seam allowance included
Button
Velcro
Flap
Size 5
Pleats
JADEN BABY JADEN BABY
SNEAKERS SNEAKERS
Size 2 Size 3
¼- inch seam allowance included
¼- inch seam allowance included
Exterior Fabric : Cut 2
Exterior Fabric : Cut 2 Lining: Cut 2
Lining: Cut 2 Interfacing: Cut 2
Interfacing: Cut 2
Draw the pattern as shown.
Draw the pattern as shown.
Then flip it over so it is the
Then flip it over so it is the
opposite foot and draw it
opposite foot and draw it
again.
again.
SOLE SOLE
JADEN BABY SNEAKERS
Size 5
JADEN BABY SNEAKERS
Size 4 ¼- inch seam allowance included
¼- inch seam allowance included
Exterior Fabric : Cut 2
Exterior Fabric : Cut 2 Lining: Cut 2
Lining: Cut 2 Interfacing: Cut 2
Interfacing: Cut 2
Draw the pattern as shown.
Then flip it over so it is the Draw the pattern as shown.
opposite foot and draw it Then flip it over so it is the
again. opposite foot and draw it
again.
SOLE
SOLE